So far ahead…
…it’s in a class of its own!
The TelcoBridges’ System-Blade™ with its non-blocking
architecture allows you to build new, and easily
upgrade existing telecommunication applications; to
meet today’s requirements for superior performance,
flexibility, reliability, scalability and density.
• Easy integration T1
o Up to 28 T1 streams M13
• Dynamic configuration multiplexed in each DS3
• Non-blocking architecture interface
• Proven flexibility o Framing: SF, ESF, SLC96
• High availability E1
Up to 21 E1 streams M13
• Unmatched density multiplexed in each DS3 interface
• Superior scalability following ITU-T G.747
o Framing: Double frame, CRC
multi frame, Automatic
fallback to multi frame
ISDN
Control and Management o Q.921 LAPD
o Q.931 ISDN PRI
TR41459 (NI-2, Lucent 4ESS and
Control 5ESS, Nortel DMS-100, Nortel DMS-
o Message-based APIs over Ethernet 250)
o Dual redundant rear panel Ethernet (100/1000 Euro ISDN ETSI NET5 (French,
Mbps) or PICMG 2.16 in a dual fabric packet German, UK, China, Hong-Kong, and
switched backplane (100/1000 Mbps) Korea)
o Does not require cPCI CPU server blades Japanese NTT INSnetl500
Management Australian TS-014 and TS-038
o Ethernet port or RS-232C Serial port CAS
o Field upgradeable software and firmware CAS variants
o Front panel push buttons for field information MFC-R2
on 8-character display Wink Start
o Full set of APIs for management FXS Ground Start
High availability and redundancy FXS Loop Start
o Hot swap (PICMG 2.1 R2.0 Hot Swap FXO
Specifications) Taiwan modified R1
o Hot insertion
o Supports application redundancy
o APS with external TB640-DS3
Diagnostics Media Processing
o POST: Power On Self-Test
o Local and remote line loopback ¾ Functions are available on all channels
o Log and status available for all modules ¾ DSP mezzanine supports up to 1984 channels
including full performance monitoring ¾ DSP software license available on a per channel basis
Host Operating system
o Host APIs under Solaris, Linux and Windows Voice Processing
o G.711 PCM 64kbps, Alaw or µlaw
o Alaw to µlaw conversion on all channels
Backplane Interfaces o Play and record on all channels
o Compact PCI (PICMG 2.0, Rev 3.0) o Voice Activity Detection (VAD) and Comfort
o ECTF H.110 (PICMG 2.5, Rel 2.0), 4096 Noise Generation (CNG)
timeslots fully switchable o Automatic Gain Control (AGC)
o PICMG 2.16 R1.0 Packet Switching Backplane o Volume Control
Specifications (PSB) Tone Processing
o Tone detection and suppression
o Programmable tone generation
Mechanical Conferencing
o Compact PCI boards o Up to 132 participants per conference, with
6U single slot unlimited number of listeners
Front panel (233 x 160mm)
Rear panel (233 x 80mm)
Keying (PICMG 2.10 Rev 1.0) VoIP
o Connectors
3 dual BNC DS3 interfaces
Dual RJ-45 Ethernet ¾ Optional VoIP mezzanine
¾ Up to 2424 channels of G.711 20ms with 128ms echo tail
RS232C Serial port
¾ See VoIP Spec Sheet for full specifications
APS connector
Scalability
Power Requirements
o Max 3.3A @ 5v
o Max 13.1A @ 3.3v TB Multi-Blade™ interconnectivity (For further
o <0.1A @ -12v details, see the TB Multi-Blade™ Spec Sheet)
o Total board power consumption less than 60W
o Multi-Blade™ mezzanine supports up to 2048
channels
Environment and Certifications o Connects to the TB Multi-Blade™ to create a
non-blocking switch with up to sixteen TB640
Note: As these specifications are being revised on a regular
family blades
basis, for up to the minute details, please check:
o Supports dual links on two TB Multi-Blades™ for
redundancy
http://www.telcobridges.com/