Anda di halaman 1dari 639

Site VELIZY Originators Wei Yu

EVOLIUM SAS

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE Release B10

System Sub-system Document Category

: : :

ALCATEL BSS SYS-TLA PRODUCT DEFINITION

ABSTRACT
This document describes the layer 3 messages for the Air interface.

Name App. Name App.

M. TITIN-SCHNAIDER
SYT DPM

Approvals R. MAUGER
SYT CCM

SONG Jun
BSC DPM

R.SABELLEK
BTS DPM

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 1/639

REVIEW
Ed. 01 Proposal 01 Ed. 01 Proposal 02 Ed. 01 Proposal 03 2006-07-18 2006-08-24 2006-09-15 Review report MRD/TD/SYT/206174_1 Review report MRD/TD/SYT/206174_2 Review report MRD/TD/SYT/206174_3

HISTORY
Version Ed. 01 Proposal 01 Date 2006-06-30 This document is based on B9 version 3BK 11203 0111 DSZZA Ed 04 released. Following impacts are added: DTM (part of this content covered by CR20/156198 later) Improved Extended UL TBF mode Usage CPICH Ec/No and CPICH/RSCP measurements for 2G to 3G cell reselection Fast 3G cell reselection at 2G CS call release CR20/188166: Classmark Handling : alignment with CT#31. Update according to review report MRD/TD/SYT/206174_1. Correct some errors in DTM. Update according to review report MRD/TD/SYT/206174_2. Merge CR20/190644: cell reselection from 2G to 3G TDD cells. Update according to review report MRD/TD/SYT/206174_3. Update for DR4 MR1, following CRs are included: CR20/195882:Compressed INTER RAT HANDOVER INFO Indication; CR20/201761:Correction of IE length in DTM Assignment Command; CR20/207226:3G Early Classmark Sending Restriction in SI3 not in line with SIM and feature need; CR20/208900:Support of suspension cause 6; CR20/209156:Bad range definition for 3G measurements; CR20/210340:Correction of SI 6 Band Indicator description; Update to include following CRs: CR20/205663: Interoperability with GAN CR20/214433: Message types of SI5bis and 5ter are incorrect CR20/214619: IE "RR Packet DL Assignment" is not in line with DTM spec Update to include following CRs: CR20/212378: Impact of feature AMR-WB CR20/216797: Length of IE "Classmark 3" is incorrect. CR20/217175: Variable bit map format of IE "Frequency List" in some messages is incorrect CR20/218583: Introduction of multislot classes 30-33 Update to include CR20/226237: impacts of Q&E solution of 2G to 3G-TDD cell reselection Reason for update

Ed. 01 Proposal 02 Ed. 01 Proposal 03 Ed. 01 Released Ed. 02 Released

2006-07-28 2006-08-30 2006-09-28 2007-4-19

Ed. 03 Released

2007-6-14

Ed. 04 Released

2007-9-17

Ed. 05 Released

2008-2-14

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 2/639

TABLE OF CONTENTS
1 INTRODUCTION............................................................................................................................. 13 1.1 Scope ................................................................................................................................... 13

4 CROSS REFERENCE ON INFORMATION ELEMENTS .............................................................. 20 5 DESCRIPTION OF THE HEADER ON THE RADIO INTERFACE................................................ 28 5.1 GENERAL DESCRIPTION FOR STANDARD L3 MESSAGE ............................................ 28 5.1.1 PROTOCOL DISCRIMINATOR .................................................................................... 28 5.1.2 TRANSACTION IDENTIFIER/SKIP INDICATOR ......................................................... 29 5.1.3 MESSAGE TYPE .......................................................................................................... 29 5.2 GENERAL DESCRIPTION FOR NON STANDARD L3 MESSAGE ................................... 33 5.2.1 Messages using the short header format.................................................................... 33 5.2.2 Other formats ................................................................................................................ 34

3 LIST OF THE MESSAGES............................................................................................................. 17

2 GENERAL PRESENTATION ......................................................................................................... 14 2.1 Preliminaries........................................................................................................................ 14 2.2 Messages presentation ...................................................................................................... 14 2.2.1 Introduction.................................................................................................................... 14 2.2.2 The general overview.................................................................................................... 14 2.3 The information element description................................................................................ 15 2.3.1 The bit description ......................................................................................................... 15 2.4 Summary description ......................................................................................................... 15 2.5 Cross reference................................................................................................................... 16

6 RADIO INTERFACE MESSAGES FOR GSM................................................................................ 35 6.1 APPLICATION INFORMATION ........................................................................................... 35 6.1.1 GENERAL DESCRIPTION ........................................................................................... 36 6.1.2 APDU ID........................................................................................................................ 36 6.1.3 APDU Flags................................................................................................................... 37 6.1.4 APDU Data.................................................................................................................... 38 6.2 ASSIGNMENT COMMAND.................................................................................................. 42 6.2.1 GENERAL DESCRIPTION ........................................................................................... 44 6.2.2 Channel Description / CHANNEL DESCRIPTION - Phase 1 ....................................... 49 6.2.3 Description of the First Channel, after time / CHANNEL DESCRIPTION 2 - Phase 2. 51 6.2.4 POWER COMMAND..................................................................................................... 53 6.2.5 FREQUENCY LIST, after time / FREQUENCY LIST.................................................... 55 6.2.6 CELL CHANNEL DESCRIPTION ................................................................................. 60 6.2.7 Description of the multislot configuration / MULTISLOT ALLOCATION....................... 61 6.2.8 Mode of the First Channel (Channel Set 1) / CHANNEL MODE .................................. 62 6.2.9 MOBILE ALLOCATION, after time / MOBILE ALLOCATION ....................................... 63 6.2.10 VGCS TARGET MODE INDICATION........................................................................... 64 6.2.11 MULTIRATE CONFIGURATION................................................................................... 65 6.3 ASSIGNMENT COMPLETE ................................................................................................. 68 6.3.1 GENERAL DESCRIPTION ........................................................................................... 69 6.3.2 RR CAUSE.................................................................................................................... 69 6.4 ASSIGNMENT FAILURE ..................................................................................................... 70 6.4.1 GENERAL DESCRIPTION ........................................................................................... 71 6.4.2 RR CAUSE.................................................................................................................... 71 6.5 CHANNEL MODE MODIFY ................................................................................................. 72 6.5.1 GENERAL DESCRIPTION ........................................................................................... 73 6.5.2 CHANNEL DESCRIPTION - Phase 1........................................................................... 74 6.5.3 Channel Description / CHANNEL DESCRIPTION 2 - Phase2 ..................................... 76 6.5.4 CHANNEL MODE ......................................................................................................... 78 6.5.5 MULTIRATE CONFIGURATION................................................................................... 79 6.6 CHANNEL MODE MODIFY ACK......................................................................................... 82 6.6.1 GENERAL DESCRIPTION ........................................................................................... 83 6.6.2 CHANNEL DESCRIPTION - Phase 1........................................................................... 83 6.6.3 CHANNEL DESCRIPTION 2 - Phase2......................................................................... 85 ED EVOLIUM 05 RELEASED
0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 3/639

6.6.4 CHANNEL MODE ......................................................................................................... 87 CHANNEL RELEASE .......................................................................................................... 88 6.7.1 GENERAL DESCRIPTION ........................................................................................... 90 6.7.2 RR CAUSE.................................................................................................................... 92 6.7.3 BA RANGE.................................................................................................................... 93 6.7.4 GROUP CHANNEL DESCRIPTION ............................................................................. 94 6.7.5 GPRS RESUMPTION ................................................................................................... 96 6.7.6 CELL CHANNEL DESCRIPTION ................................................................................. 97 6.7.7 CELL SELECTION INDICATOR AFTER RELEASE OF ALL TCH AND SDCCH...... 103 6.8 CHANNEL REQUEST ........................................................................................................ 106 6.8.1 GENERAL DESCRIPTION ......................................................................................... 107 6.9 CIPHERING MODE COMMAND........................................................................................ 109 6.9.1 GENERAL DESCRIPTION ......................................................................................... 110 6.9.2 CIPHER MODE SETTING .......................................................................................... 110 6.9.3 CIPHER RESPONSE.................................................................................................. 111 6.10 CIPHERING MODE COMPLETE ....................................................................................... 112 6.10.1 GENERAL DESCRIPTION ......................................................................................... 113 6.10.2 MOBILE EQUIPMENT IDENTITY............................................................................... 113 6.11 CLASSMARK CHANGE .................................................................................................... 114 6.11.1 GENERAL DESCRIPTION ......................................................................................... 115 6.11.2 MS CLASSMARK 2 - GSM Phase 1 ........................................................................... 116 6.11.3 MS CLASSMARK 2 - GSM Phase 2 ........................................................................... 118 6.11.4 MS CLASSMARK 3..................................................................................................... 121 6.12 CLASSMARK ENQUIRY.................................................................................................... 132 6.12.1 GENERAL DESCRIPTION ......................................................................................... 132 6.12.2 CLASSMARK ENQUIRY MASK ................................................................................. 133 6.13 CM RE-ESTABLISHMENT REQUEST .............................................................................. 134 6.13.1 GENERAL DESCRIPTION ......................................................................................... 135 6.13.2 CIPHERING KEY SEQUENCE NUMBER .................................................................. 138 6.13.3 MS CLASSMARK 2 - GSM Phase 1 ........................................................................... 139 6.13.4 MS CLASSMARK 2 - GSM Phase 2 ........................................................................... 140 6.13.5 MOBILE IDENTITY ..................................................................................................... 143 6.13.6 LOCATION AREA IDENTIFICATION ......................................................................... 144 6.14 CM SERVICE REQUEST ................................................................................................... 145 6.14.1 GENERAL DESCRIPTION ......................................................................................... 146 6.14.2 CM SERVICE TYPE.................................................................................................... 149 6.14.3 CIPHERING KEY SEQUENCE NUMBER .................................................................. 150 6.14.4 MS CLASSMARK 2 - GSM Phase 1 ........................................................................... 151 6.14.5 MS CLASSMARK 2 - GSM Phase 2 ........................................................................... 152 6.14.6 MOBILE IDENTITY ..................................................................................................... 155 6.14.7 PRIORITY LEVEL ....................................................................................................... 156 6.15 DTM ASSIGNMENT COMMAND....................................................................................... 157 6.15.1 GENERAL DESCRIPTION ......................................................................................... 158 6.15.2 POWER COMMAND................................................................................................... 162 6.15.3 CHANNEL DESCRIPTION ......................................................................................... 165 6.15.4 GPRS BROADCAST INFORMATION ........................................................................ 167 6.15.5 CELL CHANNEL DESCRIPTION ............................................................................... 172 6.15.6 CHANNEL MODE ....................................................................................................... 173 6.15.7 FREQUENCY LIST ..................................................................................................... 174 6.15.8 MOBILE ALLOCATION ............................................................................................... 177 6.15.9 RR PACKET UL ASSIGNMENT ................................................................................. 178 6.15.10 RR PACKET DL ASSIGNMENT ................................................................................. 183 6.15.11 MULTIRATE CONFIGURATION................................................................................. 187 6.16 DTM ASSIGNMENT FAILURE .......................................................................................... 190 6.16.1 GENERAL DESCRIPTION ......................................................................................... 191 6.16.2 RR CAUSE.................................................................................................................. 191 6.17 DTM INFORMATION.......................................................................................................... 192 6.17.1 GENERAL DESCRIPTION ......................................................................................... 193 6.17.2 ROUTING AREA IDENTIFICATION ........................................................................... 193 6.17.3 DTM INFORMATION DETAILS .................................................................................. 194 6.7 ED EVOLIUM 05 RELEASED
0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 4/639

6.18 DTM REJECT ..................................................................................................................... 195 6.18.1 GENERAL DESCRIPTION ......................................................................................... 196 6.18.2 WAIT INDICATION...................................................................................................... 196 6.19 DTM REQUEST.................................................................................................................. 197 6.19.1 GENERAL DESCRIPTION ......................................................................................... 198 6.19.2 TEMPORARY LOGICAL LINK IDENTIFIER (TLLI) .................................................... 199 6.19.3 CHANNEL REQUEST DESCRIPTION....................................................................... 200 6.20 E-GPRS PACKET CHANNEL REQUEST ......................................................................... 202 6.20.1 GENERAL DESCRIPTION ......................................................................................... 202 6.21 EXTENDED MEASUREMENT ORDER ............................................................................. 204 6.21.1 GENERAL DESCRIPTION ......................................................................................... 205 6.21.2 EXTENDED MEASUREMENT FREQUENCY LIST ................................................... 205 6.22 EXTENDED MEASUREMENT REPORT ........................................................................... 206 6.22.1 GENERAL DESCRIPTION ......................................................................................... 207 6.22.2 EXTENDED MEASUREMENT RESULTS.................................................................. 208 6.23 GPRS INFORMATION ....................................................................................................... 210 6.23.1 GENERAL DESCRIPTION ......................................................................................... 211 6.23.2 TEMPORARY LOGICAL LINK IDENTIFIER (TLLI) .................................................... 211 6.23.3 LLC PDU ..................................................................................................................... 211 6.24 GPRS SUSPENSION REQUEST....................................................................................... 212 6.24.1 GENERAL DESCRIPTION ......................................................................................... 213 6.24.2 TEMPORARY LOGICAL LINK IDENTIFIER (TLLI) .................................................... 213 6.24.3 ROUTING AREA IDENTIFICATION (RAI).................................................................. 214 6.24.4 SUSPENSION CAUSE ............................................................................................... 214 6.25 HANDOVER ACCESS ....................................................................................................... 216 6.25.1 GENERAL DESCRIPTION ......................................................................................... 216 6.26 HANDOVER COMMAND ................................................................................................... 217 6.26.1 GENERAL DESCRIPTION ......................................................................................... 220 6.26.2 CELL DESCRIPTION.................................................................................................. 228 6.26.3 Channel Description / CHANNEL DESCRIPTION - Phase 1 ..................................... 229 6.26.4 Description of the first channel, after time / CHANNEL DESCRIPTION 2 - Phase 2 . 231 6.26.5 HANDOVER REFERENCE......................................................................................... 233 6.26.6 POWER COMMAND AND ACCESS TYPE................................................................ 234 6.26.7 SYNCHRONIZATION INDICATION ........................................................................... 237 6.26.8 FREQUENCY SHORT LIST ....................................................................................... 238 6.26.9 FREQUENCY LIST ..................................................................................................... 241 6.26.10 CELL CHANNEL DESCRIPTION ............................................................................... 245 6.26.11 MULTISLOT ALLOCATION ........................................................................................ 246 6.26.12 CHANNEL MODE ....................................................................................................... 247 6.26.13 FREQUENCY CHANNEL SEQUENCE ...................................................................... 248 6.26.14 MOBILE ALLOCATION, after time.............................................................................. 249 6.26.15 CIPHER MODE SETTING .......................................................................................... 250 6.26.16 MULTIRATE CONFIGURATION................................................................................. 251 6.27 HANDOVER COMPLETE .................................................................................................. 254 6.27.1 GENERAL DESCRIPTION ......................................................................................... 255 6.27.2 RR CAUSE.................................................................................................................. 255 6.28 HANDOVER FAILURE....................................................................................................... 256 6.28.1 GENERAL DESCRIPTION ......................................................................................... 257 6.28.2 RR CAUSE.................................................................................................................. 257 6.29 IMMEDIATE ASSIGNMENT............................................................................................... 258 6.29.1 GENERAL DESCRIPTION ......................................................................................... 259 6.29.2 L2 PSEUDO LENGTH ................................................................................................ 261 6.29.3 PAGE MODE / Dedicated mode or TBF ..................................................................... 262 6.29.4 CHANNEL DESCRIPTION ......................................................................................... 264 6.29.5 PACKET CHANNEL DESCRIPTION .......................................................................... 266 6.29.6 REQUEST REFERENCE............................................................................................ 267 6.29.7 TIMING ADVANCE ..................................................................................................... 268 6.29.8 MOBILE ALLOCATION ............................................................................................... 269 6.29.9 IA REST OCTETS....................................................................................................... 270 6.30 IMMEDIATE ASSIGNMENT EXTENDED .......................................................................... 274 ED EVOLIUM 05 RELEASED
0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 5/639

6.30.1 GENERAL DESCRIPTION ......................................................................................... 275 6.30.2 L2 PSEUDO LENGTH ................................................................................................ 276 6.30.3 PAGE MODE............................................................................................................... 276 6.30.4 CHANNEL DESCRIPTION ......................................................................................... 277 6.30.5 REQUEST REFERENCE............................................................................................ 279 6.30.6 TIMING ADVANCE ..................................................................................................... 280 6.30.7 MOBILE ALLOCATION ............................................................................................... 281 6.30.8 IAX REST OCTETS .................................................................................................... 282 6.31 IMMEDIATE ASSIGNMENT REJECT ............................................................................... 283 6.31.1 GENERAL DESCRIPTION ......................................................................................... 284 6.31.2 L2 PSEUDO LENGTH ................................................................................................ 285 6.31.3 PAGE MODE............................................................................................................... 285 6.31.4 REQUEST REFERENCE............................................................................................ 286 6.31.5 WAIT INDICATION...................................................................................................... 287 6.31.6 IAR REST OCTETS .................................................................................................... 287 6.32 IMMEDIATE SETUP........................................................................................................... 289 6.32.1 GENERAL DESCRIPTION ......................................................................................... 290 6.32.2 CIPHERING KEY SEQUENCE NUMBER .................................................................. 290 6.32.3 MS CLASSMARK 2..................................................................................................... 292 6.32.4 MOBILE IDENTITY ..................................................................................................... 295 6.32.5 GROUP IDENTITY...................................................................................................... 296 6.33 IMMEDIATE SETUP 2........................................................................................................ 297 6.33.1 GENERAL DESCRIPTION ......................................................................................... 298 6.33.2 CIPHERING KEY SEQUENCE NUMBER .................................................................. 299 6.33.3 MS CLASSMARK 2..................................................................................................... 300 6.33.4 TMSI ............................................................................................................................ 303 6.33.5 GROUP IDENTITY...................................................................................................... 304 6.33.6 COMPRESSED OTDI ................................................................................................. 305 6.34 IMSI DETACH INDICATION .............................................................................................. 306 6.34.1 GENERAL DESCRIPTION ......................................................................................... 307 6.34.2 MS CLASSMARK 1..................................................................................................... 308 6.34.3 MOBILE IDENTITY ..................................................................................................... 309 6.35 INTER SYSTEM TO UTRAN HANDOVER COMMAND.................................................... 310 6.29.1GENERAL DESCRIPTION ............................................................................................ 311 6.29.2 Handover to UTRAN Command ................................................................................... 311 6.36 LOCATION UPDATING REQUEST................................................................................... 312 6.36.1 GENERAL DESCRIPTION ......................................................................................... 313 6.36.2 LOCATION UPDATING TYPE.................................................................................... 315 6.36.3 CIPHERING KEY SEQUENCE NUMBER .................................................................. 316 6.36.4 LOCATION AREA IDENTIFICATION ......................................................................... 317 6.36.5 MS CLASSMARK 1..................................................................................................... 318 6.36.6 MOBILE IDENTITY ..................................................................................................... 319 6.37 MEASUREMENT INFORMATION ..................................................................................... 320 6.30.1 GENERAL DESCRIPTION ........................................................................................... 321 6.30.2 MESUREMENT INFORMATION VALUE PART........................................................... 322 6.38 MEASUREMENT REPORT................................................................................................ 330 6.38.1 GENERAL DESCRIPTION ......................................................................................... 331 6.38.2 MEASUREMENT RESULTS....................................................................................... 332 6.39 NOTIFICATION/FACCH..................................................................................................... 335 6.39.1 GENERAL DESCRIPTION ......................................................................................... 336 6.39.2 NOTIFICATION/FACCH with Group call Information ................................................. 336 6.39.3 PARAMETER DESCRIPTION .................................................................................... 339 6.39.4 NOTIFICATION/FACCH with paging Information ....................................................... 347 6.40 NOTIFICATION/NCH.......................................................................................................... 349 6.40.1 GENERAL DESCRIPTION ......................................................................................... 350 6.40.2 PARAMETER DESCRIPTION .................................................................................... 353 6.41 NOTIFICATION RESPONSE ............................................................................................. 355 6.41.1 GENERAL DESCRIPTION ......................................................................................... 356 6.41.2 MS Classmark 2 .......................................................................................................... 357 6.41.3 Mobile Identity ............................................................................................................. 360 ED EVOLIUM 05 RELEASED
0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 6/639

6.41.4 Group or broadcast Call reference.............................................................................. 361 6.42 PACKET ASSIGNMENT .................................................................................................... 362 6.42.1 GENERAL DESCRIPTION ......................................................................................... 363 6.42.2 GPRS broadcast information ...................................................................................... 364 6.42.3 RR Packet UL Assignment.......................................................................................... 369 6.42.4 RR Packet DL Assignment.......................................................................................... 374 6.43 PACKET NOTIFICATION................................................................................................... 378 6.43.1 GENERAL DESCRIPTION ......................................................................................... 379 6.43.2 P-TMSI ........................................................................................................................ 379 6.43.3 MOBILE IDENTITY ..................................................................................................... 380 6.44 PAGING REQUEST TYPE 1 .............................................................................................. 381 6.44.1 GENERAL DESCRIPTION ......................................................................................... 382 6.44.2 PAGE MODE............................................................................................................... 383 6.44.3 CHANNELS NEEDED FOR MOBILES 1 & 2 ............................................................. 383 6.44.4 MOBILE IDENTITY ..................................................................................................... 384 6.44.5 P1 REST OCTETS...................................................................................................... 386 6.45 PAGING REQUEST TYPE 2 .............................................................................................. 391 6.45.1 GENERAL DESCRIPTION ......................................................................................... 392 6.45.2 PAGE MODE............................................................................................................... 393 6.45.3 CHANNELS NEEDED FOR MOBILES 1 & 2 ............................................................. 393 6.45.4 (P)TMSI ....................................................................................................................... 394 6.45.5 MOBILE IDENTITY ..................................................................................................... 394 6.45.6 P2 REST OCTETS...................................................................................................... 396 6.46 PAGING REQUEST TYPE 3 .............................................................................................. 398 6.46.1 GENERAL DESCRIPTION ......................................................................................... 399 6.46.2 PAGE MODE............................................................................................................... 399 6.46.3 CHANNELS NEEDED FOR MOBILES 1 & 2 ............................................................. 400 6.46.4 (P)TMSI ....................................................................................................................... 400 6.46.5 P3 REST OCTETS...................................................................................................... 401 6.47 PAGING RESPONSE......................................................................................................... 403 6.47.1 GENERAL DESCRIPTION ......................................................................................... 404 6.47.2 CIPHERING KEY SEQUENCE NUMBER .................................................................. 405 6.47.3 MS CLASSMARK 2 - GSM Phase 1 ........................................................................... 406 6.47.4 MS CLASSMARK 2 - GSM Phase 2 ........................................................................... 407 6.47.5 MOBILE IDENTITY ..................................................................................................... 410 6.48 PHYSICAL INFORMATION ............................................................................................... 411 6.48.1 GENERAL DESCRIPTION ......................................................................................... 411 6.48.2 TIMING ADVANCE ..................................................................................................... 412 6.49 SYNCHRONIZATION CHANNEL INFORMATION............................................................ 413 6.49.1 GENERAL DESCRIPTION ......................................................................................... 413 6.50 SYSTEM INFORMATION TYPE 1 ..................................................................................... 414 6.50.1 GENERAL DESCRIPTION ......................................................................................... 415 6.50.2 CELL CHANNEL DESCRIPTION ............................................................................... 417 6.50.3 RACH CONTROL PARAMETERS.............................................................................. 423 6.50.4 SI 1 REST OCTETS.................................................................................................... 425 6.51 SYSTEM INFORMATION TYPE 2 ..................................................................................... 427 6.51.1 GENERAL DESCRIPTION ......................................................................................... 428 6.51.2 BCCH FREQUENCY LIST / NEIGHBOUR CELLS DESCRIPTION........................... 429 6.51.3 NCC PERMITTED....................................................................................................... 435 6.51.4 RACH CONTROL PARAMETERS.............................................................................. 436 6.52 SYSTEM INFORMATION TYPE 2BIS ............................................................................... 438 6.52.1 GENERAL DESCRIPTION ......................................................................................... 439 6.52.2 EXTENDED BCCH FREQUENCY LIST / NEIGHBOUR CELLS DESCRIPTION...... 440 6.52.3 RACH CONTROL PARAMETERS.............................................................................. 445 6.52.4 SI 2BIS REST OCTETS .............................................................................................. 446 6.53 SYSTEM INFORMATION TYPE 2TER .............................................................................. 447 6.53.1 GENERAL DESCRIPTION ......................................................................................... 448 6.53.2 EXTENDED BCCH FREQUENCY LIST / NEIGHBOUR CELLS DESCRIPTION 2... 450 6.53.3 SI 2TER REST OCTETS ............................................................................................ 456 6.54 SYSTEM INFORMATION TYPE 2QUATER ...................................................................... 459 ED EVOLIUM 05 RELEASED
0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 7/639

6.54.1 GENERAL DESCRIPTION ......................................................................................... 460 6.54.2 SI 2QUATER REST OCTETS..................................................................................... 460 6.55 SYSTEM INFORMATION TYPE 3 ..................................................................................... 469 6.55.1 GENERAL DESCRIPTION ......................................................................................... 470 6.55.2 CELL IDENTITY .......................................................................................................... 475 6.55.3 LOCATION AREA IDENTIFICATION ......................................................................... 475 6.55.4 CONTROL CHANNEL DESCRIPTION....................................................................... 476 6.55.5 CELL OPTIONS (BCCH) ............................................................................................ 478 6.55.6 CELL SELECTION PARAMETERS ............................................................................ 479 6.55.7 RACH CONTROL PARAMETER ................................................................................ 480 6.55.8 SI 3 REST OCTETS.................................................................................................... 482 6.56 SYSTEM INFORMATION TYPE 4 ..................................................................................... 484 6.56.1 GENERAL DESCRIPTION ......................................................................................... 485 6.56.2 LOCATION AREA IDENTIFICATION ......................................................................... 488 6.56.3 CELL SELECTION PARAMETERS ............................................................................ 489 6.56.4 RACH CONTROL PARAMETER ................................................................................ 490 6.56.5 CBCH CHANNEL DESCRIPTION .............................................................................. 492 6.56.6 CBCH MOBILE ALLOCATION.................................................................................... 494 6.56.7 SI 4 REST OCTETS.................................................................................................... 495 6.57 SYSTEM INFORMATION TYPE 5 ..................................................................................... 497 6.57.1 GENERAL DESCRIPTION ......................................................................................... 498 6.57.2 BCCH FREQUENCY LIST / NEIGHBOUR CELLS DESCRIPTION........................... 499 6.58 SYSTEM INFORMATION TYPE 5BIS ............................................................................... 505 6.58.1 GENERAL DESCRIPTION ......................................................................................... 506 6.58.2 EXTENSION OF THE BCCH FREQUENCY LIST / NEIGHBOUR CELLS DESCRIPTION ...................................................................................................................... 507 6.59 SYSTEM INFORMATION TYPE 5TER .............................................................................. 512 6.59.1 GENERAL DESCRIPTION ......................................................................................... 513 6.59.2 EXTENDED BCCH FREQUENCY LIST / NEIGHBOUR CELLS DESCRIPTION 2... 514 6.60 SYSTEM INFORMATION TYPE 6 ..................................................................................... 520 6.60.1 GENERAL DESCRIPTION ......................................................................................... 521 6.60.2 CELL IDENTITY .......................................................................................................... 522 6.60.3 LOCATION AREA IDENTIFICATION ......................................................................... 522 6.60.4 CELL OPTIONS (SACCH) .......................................................................................... 523 6.60.5 NCC PERMITTED....................................................................................................... 524 6.60.6 SI 6 Rest octets ........................................................................................................... 525 6.61 SYSTEM INFORMATION TYPE 7 and 8........................................................................... 528 6.61.1 GENERAL DESCRIPTION ......................................................................................... 529 6.61.2 PRIO_THR .................................................................................................................. 530 6.61.3 LSA_OFFSET ............................................................................................................. 530 6.61.4 CELL IDENTITY .......................................................................................................... 530 6.61.5 LSA ID INFORMATION............................................................................................... 531 6.62 SYSTEM INFORMATION TYPE 10 ................................................................................... 532 6.62.1 GENERAL DESCRIPTION ......................................................................................... 533 6.62.2 BA ind .......................................................................................................................... 545 6.62.3 First frequency............................................................................................................. 545 6.62.4 Bsic.............................................................................................................................. 545 6.62.5 Cell barred................................................................................................................... 546 6.62.6 La different .................................................................................................................. 546 6.62.7 Ms txpwr max cch........................................................................................................ 546 6.62.8 Rxlev access min ........................................................................................................ 546 6.62.9 Cell reselection offset.................................................................................................. 546 6.62.10 Temporary offset ......................................................................................................... 546 6.62.11 Penalty time................................................................................................................. 546 6.63 SYSTEM INFORMATION TYPE 13 ................................................................................... 547 6.63.1 GENERAL DESCRIPTION ......................................................................................... 548 6.63.2 BCCH_CHANGE_MARK ............................................................................................ 552 6.63.3 SI_CHANGE_FIELD ................................................................................................... 552 6.63.4 SI13_CHANGE_MARK ............................................................................................... 553 6.63.5 GPRS MOBILE ALLOCATION.................................................................................... 554 ED EVOLIUM 05 RELEASED LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 8/639

0138_05.doc 15/02/2008

7 RADIO INTERFACE MESSAGES FOR SMSCB......................................................................... 585 7.1 MESSAGE BLOCKS.......................................................................................................... 585 7.1.1 GENERAL DESCRIPTION ......................................................................................... 586 7.1.2 BLOCK TYPE.............................................................................................................. 589 7.2 SMSCB SCHEDULE MESSAGE ....................................................................................... 590 7.2.1 GENERAL DESCRIPTION ......................................................................................... 591 7.2.2 SCHEDULE MESSAGE HEADER.............................................................................. 594 7.2.3 NEW CBSMS MESSAGE BITMAP............................................................................. 595 7.2.4 NEW CBSMS MESSAGE DESCRIPTION ................................................................. 595 7.2.5 OTHER MESSAGE DESCRIPTIONS......................................................................... 597 8 RADIO INTERFACE MESSAGES FOR (E)GPRS....................................................................... 598 8.1 RLC/MAC block structure ................................................................................................ 598 8.1.1 GPRS RLC/MAC block structure ................................................................................ 598 8.1.2 E-GPRS RLC/MAC block structure............................................................................. 598 8.1.3 RLC data blocks .......................................................................................................... 598 8.1.4 (E)GPRS RLC/MAC control blocks............................................................................. 603 8.2 EGPRS PACKET DOWNLINK ACK/NACK ...................................................................... 605 8.3 PACKET ACCESS REJECT .............................................................................................. 606 8.4 PACKET CELL CHANGE CONTINUE .............................................................................. 607 8.5 PACKET CELL CHANGE FAILURE ................................................................................. 608 8.6 PACKET CELL CHANGE NOTIFICATION ....................................................................... 609 8.7 PACKET CELL CHANGE ORDER .................................................................................... 610 8.8 PACKET CONTROL ACKNOWLEDGMENT .................................................................... 611 8.9 PACKET CHANNEL REQUEST ........................................................................................ 612 8.10 PACKET DOWNLINK ACK/NACK .................................................................................... 613 8.11 PACKET DOWNLINK ASSIGNMENT ............................................................................... 614 ED EVOLIUM 05 RELEASED
0138_05.doc 15/02/2008

6.63.6 PRIORITY_ACCESS_THR ......................................................................................... 555 6.63.7 NETWORK_CONTROL_ORDER ............................................................................... 555 6.63.8 GPRS CELL OPTIONS ............................................................................................... 556 6.63.9 GPRS POWER CONTROL PARAMETERS............................................................... 560 6.63.10 PSI1_REPEAT_PERIOD ............................................................................................ 561 6.63.11 PBCCH DESCRIPTION .............................................................................................. 561 6.64 SYSTEM INFORMATION TYPE 16 and 17....................................................................... 563 6.64.1 GENERAL DESCRIPTION ......................................................................................... 564 6.64.2 PRIO_THR .................................................................................................................. 565 6.64.3 LSA_OFFSET ............................................................................................................. 565 6.64.4 LSA ID INFORMATION............................................................................................... 565 6.65 TALKER INDICATION ....................................................................................................... 566 6.65.1 GENERAL DESCRIPTION ......................................................................................... 567 6.65.2 MS CLASSMARK 2..................................................................................................... 567 6.65.3 MOBILE IDENTITY ..................................................................................................... 571 6.66 UTRAN CLASSMARK CHANGE....................................................................................... 572 6.66.1 GENERAL DESCRIPTION ......................................................................................... 573 6.60.1 UTRAN CLASSMARK .................................................................................................. 573 6.67 UPLINK ACCESS............................................................................................................... 574 6.67.1 GENERAL DESCRIPTION ......................................................................................... 575 6.67.2 ESTABLISHMENT CAUSE AND RANDOM REFERENCE........................................ 575 6.68 UPLINK BUSY.................................................................................................................... 576 6.68.1 GENERAL DESCRIPTION ......................................................................................... 577 6.69 UPLINK FREE .................................................................................................................... 578 6.69.1 GENERAL DESCRIPTION ......................................................................................... 579 6.69.2 UPLINK ACCESS REQUEST ..................................................................................... 579 6.70 UPLINK RELEASE............................................................................................................. 580 6.70.1 GENERAL DESCRIPTION ......................................................................................... 581 6.70.2 RR CAUSE.................................................................................................................. 581 6.71 VGCS UPLINK GRANT...................................................................................................... 582 6.71.1 GENERAL DESCRIPTION ......................................................................................... 582 6.71.2 REQUEST REFERENCE............................................................................................ 583 6.71.3 TIMING ADVANCE ..................................................................................................... 584

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 9/639

9 GLOSSARY .................................................................................................................................. 639

8.12 8.13 8.14 8.15 8.16 8.17 8.18 8.19 8.20 8.21 8.22 8.23 8.24 8.25 8.26 8.27 8.28 8.29 8.30 8.31 8.32 8.33 8.34 8.35

PACKET DOWNLINK DUMMY CONTROL BLOCK......................................................... 615 PACKET UPLINK DUMMY CONTROL BLOCK ............................................................... 616 PACKET MEASUREMENT ORDER.................................................................................. 617 PACKET MEASUREMENT REPORT................................................................................ 618 PACKET MOBILE TBF STATUS....................................................................................... 619 PACKET NEIGHBOUR CELL DATA................................................................................. 620 PACKET PAGING REQUEST ........................................................................................... 621 PACKET PDCH RELEASE ................................................................................................ 622 PACKET POWER CONTROL/TIMING ADVANCE ........................................................... 623 PACKET PSI STATUS ....................................................................................................... 624 PACKET RESOURCE REQUEST ..................................................................................... 625 PACKET SERVING CELL DATA ...................................................................................... 626 PACKET SI STATUS ......................................................................................................... 627 PACKET SYSTEM INFORMATION TYPE 1 ..................................................................... 628 PACKET SYSTEM INFORMATION TYPE 2 ..................................................................... 629 PACKET SYSTEM INFORMATION TYPE 3 ..................................................................... 630 PACKET SYSTEM INFORMATION TYPE 3bis ................................................................ 631 PACKET SYSTEM INFORMATION TYPE 3quater .......................................................... 632 PACKET SYSTEM INFORMATION TYPE 8 ..................................................................... 633 PACKET SYSTEM INFORMATION TYPE 13 ................................................................... 634 PACKET TBF RELEASE ................................................................................................... 635 PACKET TIMESLOT RECONFIGURE .............................................................................. 636 PACKET UPLINK ACK/NACK .......................................................................................... 637 PACKET UPLINK ASSIGNMENT...................................................................................... 638

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 10/639

INTERNAL REFERENCED DOCUMENTS


Not applicable

REFERENCED DOCUMENTS
3GPP references Except a few exceptions, all the information contained in the dictionary is gathered from the following 3GPP technical specifications. 3GPP TS 48.008 3GPP TS 48.058 3GPP TS 44.018 3GPP TS 24.008 3GPP TS 44.060 3GPP TS 24.012 3GPP TS 23.041 BSS-MSC Layer 3 Specification BSC-BTS Layer 3 specification Mobile Radio Interface Layer 3 Specification, Radio Resource Control Protocol Mobile Radio Interface Layer 3 Specification, Core Network Protocols MS - BSS interface ; Radio Link Control / Medium Access Control (RLC/MAC) protocol SMSCB support on the mobile radio interface Technical realization of SMSCB

ALCATEL references [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] ED EVOLIUM 3BK 11202 0439 DSZZA 3BK 11202 0413 DSZZA 3BK 11202 0438DSZZA 3BK 11202 0156 DSZZA 3BK 11202 0432 DSZZA 3BK 11202 0437 DSZZA 3BK 11202 0435 DSZZA 3BK 11202 0287 DSZZA 3BK 11202 0433 DSZZA 3BK 11202 0108 DSZZA 3BK 11202 0062 DSZZA 3BK 11202 0403 DSZZA 3BK 11202 0296 DSZZA 3BK 11202 0295 DSZZA 3BK 11202 0445 DSZZA 3BK 11202 0421 DSZZA 3BK 11202 0173 DSZZA 3BK 11202 0069 DSZZA 3BK 11202 0305 DSZZA 3BK 11204 0630 DSZZA 3BK 11202 0416 DSZZA 3BK 11202 0299 DSZZA 3BK 11202 0329 DSZZA 3BK 11202 0457 DSZZA 3BK 11202 0301 DSZZA 3BK 11203 0134 DSZZA 3BK 11203 0135 DSZZA 3BK 11202 0337 DSZZA 3BK 11202 0441 DSZZA 3BK 11202 0450 DSZZA 3BK 11202 0462 DSZZA 3BK 11202 0460 DSZZA 3BK 11202 0458 DSZZA 3BK 11202 0443 DSZZA 3BK 10202 0405 DSZZA 3BK 10202 0414 DSZZA 05 RELEASED Paging and Access Grant Control Radio and Link Establishment Normal Assignment Procedure Ciphering procedure Call Release Internal channel changes External channel changes Channel Modification Classmark Handling Transparent Message Routing Short Message Point-to-Point Radio Measurement DTX functional Specification Power Control and radio link supervision Resource allocation and management Overload Control Protocol Error handling BSS trace procedure BSS Init of Telecom part FBS Logical Configuration Management BSS Global Reset Reset Circuit and Blocking SMS Cell Broadcast System Information Management TFO Functional Specification BSS Telecom Parameters BSS Counters Catalogue LCS Functional Specification RRM PCC RLC MAC BSCGP BSSGP RRM PRH ASCI Functional Specification LAPDm Functional Specification
0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 11/639

[37]

3BK 10202 0388 DSZZA

Frequency Encoding Algorithm

RELATED DOCUMENTS
Not applicable

PREFACE OPEN POINTS / RESTRICTIONS

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 12/639

1 1.1

INTRODUCTION Scope

This volume of the message dictionary details the non-transparent messages handled by the Alcatel BSS over the radio interface.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 13/639

2 2.1

GENERAL PRESENTATION Preliminaries

Each message is described in the same way:

The messages dictionary includes also in this part:

- A general overview, - A detailed description of the Information Elements, - A bit description.

- A summary of all the messages described into the dictionary, (1) - A cross reference of all the Information Elements. This allows finding all the messages in which one Information Element appears.

2.2

Messages presentation

2.2.1 Introduction All the messages are organised alphabetically under the relevant interface (SMSCB and GPRS messages are gathered each in a dedicated section). Three parts are given for each messages: - a general overview: It is a general description of the message including the Information Elements list, the maximum and minimum lengths in octets, the normal and abnormal following events. - A detailed description of the Information Elements: - A Bit Description: It is mainly the use of the Information Element within the BSS entities. It is a bit presentation of the message as it is received or transmitted over the involved interfaces.

2.2.2 The general overview It is the first page for each message. It includes: NAME field: The name of the message. INTERFACE field: The list of three Interfaces CHANNEL/USAGE field: According to the involved interface, it is the radio channel definition or the fact that the message is transparent or not for the BTS. When the box is empty, the message is not used on this interface. 3GPP-REF. field: It is the reference to a 3GPP technical specification. FUNCTION field: It is the description of the function of the message. This is extracted from the 3GPP technical specifications. DIRECTION field: It is the direction of the message from one entity of the BSS or MS to another one. INFORMATION ELEMENT LIST field: ED EVOLIUM 05 RELEASED
0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 14/639

It is the list of all the Information Elements. For each Information Element the following information is given: - Mandatory or Optional, - Fixed or Variable length, - The length in bytes, - Some short comments. For a full description of the use of 'M', 'C', 'L', 'O' and 'V', refer to 3GPP TS 04.07. These rules are also used for SMSCB IEs although they are not defined in 3GPP TS. IMPLEMENTATION MAXIMUM LENGTH field: It is the total of all used information elements, mandatory or optional. When the length is fixed for all parameters, a unique value is given. When not, a range is given ("minimum length" - "maximum length") FOLLOWING EVENT field: It is the description of following events (for specific procedure) for the normal and abnormal cases. TIMER field: It is the name of the Timers (started or stopped) associated with the message. SPECIFICATION DOC. REF. field: It is the reference of relevant ALCATEL document.

2.3

One page (or more) per Information Element (The classification of the following pages respects the order given by 3GPP TS). On the Radio Interface, if the Information element is mandatory, the Information element identifier (IEI) is not present (it is marked with a star). If the length is fixed the length is not present. For each Information Element: PARAMETER NAME field TYPE field: This field is used to give the Mandatory or Optional information. Note: In the 3GPP TS 44.018, this field has been split into two fields designated presence and Format. For simplicity the designation TYPE is retained in this document. DEFINITION field: It is an extract of 3GPP TSs. giving the usage of the Information Element. BIT DESCRIPTION field: It is a bit description of the element with all the needed information, including the sub parameter definition. SUB-PARAMETER DEFINITION field: It is a description (if needed) of all the sub parameters defined in the bit description. PARAMETER ORIGIN - ACTION ON PARAMETER field: It is a description of the action to be performed when receiving or transmitting the message. 2.3.1 The bit description The Bit Description (or General Description) is an overview of the message as it is sent over the various interfaces.

The information element description

2.4

ED

This part presented in the following is the list of the messages described in the messages dictionary. On each interface, a specific header is used and is described with the list of messages for each interface. 05 RELEASED
0138_05.doc 15/02/2008

Summary description

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 15/639

EVOLIUM

2.5

This part gives the use of each information element over the three interfaces.

Cross reference

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 16/639

This is a list of messages used by the Alcatel BSS on the radio interface for this release. A APPLICATION INFORMATION ASSIGNMENT COMMAND ASSIGNMENT COMPLETE ASSIGNMENT FAILURE C CHANNEL MODE MODIFY CHANNEL MODE MODIFY ACKNOWLEDGE CHANNEL RELEASE CHANNEL REQUEST CIPHERING MODE COMMAND CIPHERING MODE COMPLETE CLASSMARK CHANGE CLASSMARK ENQUIRY CM RE-ESTABLISHMENT REQUEST CM SERVICE REQUEST D DTM ASSIGNMENT COMMAND DTM ASSIGNMENT FAILURE DTM INFORMATION DTM REQUEST DTM REJECT E E-GPRS PACKET CHANNEL REQUEST E-GPRS PACKET DOWNLINK ACK NACK EXTENDED MEASUREMENT ORDER EXTENDED MEASUREMENT REPORT G GPRS INFORMATION GPRS SUSPENSION REQUEST H HANDOVER ACCESS HANDOVER COMMAND HANDOVER COMPLETE HANDOVER FAILURE I INTER SYSTEM TO UTRAN HANDOVER COMMAND IMMEDIATE ASSIGNMENT IMMEDIATE ASSIGNMENT EXTENDED IMMEDIATE ASSIGNMENT REJECT IMMEDIATE SETUP IMMEDIATE SETUP 2 IMSI DETACH INDICATION L LOCATION UPDATING REQUEST M MEASUREMENT INFORMATION MEASUREMENT REPORT N ED EVOLIUM 05 RELEASED
0138_05.doc 15/02/2008

LIST OF THE MESSAGES

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 17/639

NOTIFICATION/FACCH NOTIFICATION/NCH NOTIFICATION RESPONSE P PACKET ACCESS REJECT PACKET ASSIGNMENT PACKET CELL CHANGE CONTINUE PACKET CELL CHANGE FAILURE PACKET CELL CHANGE NOTIFICATION PACKET CELL CHANGE ORDER PACKET CHANNEL REQUEST PACKET CONTROL ACKNOWLEDGMENT PACKET DOWNLINK ACK/NACK PACKET DOWNLINK ASSIGNMENT PACKET DOWNLINK DUMMY CONTROL BLOCK PACKET MEASUREMENT ORDER PACKET MEASUREMENT REPORT PACKET MOBILE TBF STATUS PACKET NOTIFICATION PACKET PAGING REQUEST PACKET PDCH RELEASE PACKET POWER CONTROL/TIMING ADVANCE PACKET PSI STATUS PACKET RESOURCE REQUEST PACKET SERVING CELL DATA PACKET SI STATUS PACKET SYSTEM INFORMATION TYPE 1 PACKET SYSTEM INFORMATION TYPE 2 PACKET SYSTEM INFORMATION TYPE 3 PACKET SYSTEM INFORMATION TYPE 3bis PACKET SYSTEM INFORMATION TYPE 8 PACKET SYSTEM INFORMATION TYPE 13 PACKET SYSTEM INFORMATION TYPE 14 PACKET TBF RELEASE PACKET UPLINK ACK/NACK PACKET UPLINK ASSIGNMENT PACKET UPLINK DUMMY CONTROL BLOCK PAGING REQUEST TYPE 1 PAGING REQUEST TYPE 2 PAGING REQUEST TYPE 3 PAGING RESPONSE PHYSICAL INFORMATION S SMSCB MESSAGE SMSCB NULL MESSAGE SMSCB SCHEDULE MESSAGE SYNCHRONIZATION CHANNEL INFORMATION SYSTEM INFORMATION TYPE 1 SYSTEM INFORMATION TYPE 2 SYSTEM INFORMATION TYPE 2bis SYSTEM INFORMATION TYPE 2ter SYSTEM INFORMATION TYPE 2quater SYSTEM INFORMATION TYPE 3 SYSTEM INFORMATION TYPE 4 SYSTEM INFORMATION TYPE 5 SYSTEM INFORMATION TYPE 5bis SYSTEM INFORMATION TYPE 5ter SYSTEM INFORMATION TYPE 6 SYSTEM INFORMATION TYPE 7 05 RELEASED

ED

EVOLIUM

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 18/639

SYSTEM INFORMATION TYPE 8 SYSTEM INFORMATION TYPE 10 SYSTEM INFORMATION TYPE 13 SYSTEM INFORMATION TYPE 16 SYSTEM INFORMATION TYPE 17 T TALKER INDICATION U UPLINK ACCESS UPLINK BUSY UPLINK FREE UPLINK RELEASE UTRAN CLASSMARK CHANGE V VGCS UPLINK GRANT

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 19/639

A APDU Data APDU Flags APDU ID B BA Range

CROSS REFERENCE ON INFORMATION ELEMENTS

CHANNEL RELEASE

C Cell Channel Description ASSIGNMENT COMMAND CHANNEL RELEASE DTM ASSIGNMENT COMMAND HANDOVER COMMAND SYSTEM INFORMATION TYPE 1 Cell Description HANDOVER COMMAND Cell Identity SYSTEM INFORMATION TYPE 3 SYSTEM INFORMATION TYPE 6

Cell Options (BCCH) SYSTEM INFORMATION TYPE 3 Cell Options (SACCH) SYSTEM INFORMATION TYPE 6 Cell Selection Parameters SYSTEM INFORMATION TYPE 3 SYSTEM INFORMATION TYPE 4 Cell selection indicator after release of all tch and sdcch CHANNEL RELEASE Channel Description DTM ASSIGNMENT COMMAND IMMEDIATE ASSIGNMENT IMMEDIATE ASSIGNMENT EXTENDED NOTIFICATION/FACCH NOTIFICATION/NCH SYSTEM INFORMATION TYPE 4 Channel Description 2 ASSIGNMENT COMMAND CHANNEL MODE MODIFY CHANNEL MODE MODIFY ACKNOWLEDGE HANDOVER COMMAND Channel Request Description DTM REQUEST Channel Mode ASSIGNMENT COMMAND CHANNEL MODE MODIFY ED EVOLIUM 05 RELEASED
0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 20/639

CHANNEL MODE MODIFY ACKNOWLEDGE DTM ASSIGNMENT COMMAND HANDOVER COMMAND Channel First NOTIFICATION/FACCH

Channel Mode 2 ASSIGNMENT COMMAND HANDOVER COMMAND Channel Needed PAGING REQUEST TYPE 1 PAGING REQUEST TYPE 2 PAGING REQUEST TYPE 3 Ciphering Key Sequence number CM RE-ESTABLISHMENT REQUEST CM SERVICE REQUEST IMMEDIATE SETUP IMMEDIATE SETUP 2 LOCATION UPDATING REQUEST PAGING RESPONSE Cipher mode setting ASSIGNMENT COMMAND CIPHERING MODE COMMAND HANDOVER COMMAND Cipher response CIPHERING MODE COMMAND Classmark Enquiry Mask CLASSMARK ENQUIRY CM service Type CM SERVICE REQUEST Control Channel Description SYSTEM INFORMATION TYPE 3 Compressed otdi IMMEDIATE SETUP 2 DTM Information Rest Octets DTM INFORMATION E eMLPP priority NOTIFICATION/FACCH Extended Measurement Frequency List EXTENDED MEASUREMENT ORDER Extended Measurement Results EXTENDED MEASUREMENT REPORT F Frequency Channel Sequence ASSIGNMENT COMMAND 05 RELEASED

ED

EVOLIUM

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 21/639

HANDOVER COMMAND Frequency List ASSIGNMENT COMMAND DTM ASSIGNMENT COMMAND HANDOVER COMMAND Frequency Short List HANDOVER COMMAND NOTIFICATION/FACCH NOTIFICATION/NCH G GPRS Broadcast Information DTM ASSIGNMENT COMMAND PACKET ASSIGNMENT Group or broadcast Call reference NOTIFICATION RESPONSE Group Call Reference NOTIFICATION/FACCH Group Channel Description CHANNEL RELEASE NOTIFICATION/FACCH NOTIFICATION/NCH Group Identity IMMEDIATE SETUP IMMEDIATE SETUP 2

H Handover Reference HANDOVER ACCESS HANDOVER COMMAND Handover to UTRAN Command INTER SYSTEM TO UTRAN HANDOVER COMMAND I IA Rest Octets IMMEDIATE ASSIGNMENT IAR Rest Octets IMMEDIATE ASSIGNMENT REJECT IAX Rest Octets IMMEDIATE ASSIGNMENT EXTENDED L L2 Pseudo Length IMMEDIATE ASSIGNMENT IMMEDIATE ASSIGNMENT EXTENDED IMMEDIATE ASSIGNMENT REJECT PAGING REQUEST TYPE 1 PAGING REQUEST TYPE 2 PAGING REQUEST TYPE 3 SYSTEM INFORMATION TYPE 1 SYSTEM INFORMATION TYPE 2 SYSTEM INFORMATION TYPE 2bis ED EVOLIUM 05 RELEASED LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 22/639

0138_05.doc 15/02/2008

SYSTEM INFORMATION TYPE 2ter SYSTEM INFORMATION TYPE 2quater SYSTEM INFORMATION TYPE 3 SYSTEM INFORMATION TYPE 4 SYSTEM INFORMATION TYPE 7 SYSTEM INFORMATION TYPE 8 SYSTEM INFORMATION TYPE 13 SYSTEM INFORMATION TYPE 16 SYSTEM INFORMATION TYPE 17 LLC PDU GPRS INFORMATION

Location Area Identification CM RE-ESTABLISHMENT REQUEST LOCATION UPDATING REQUEST SYSTEM INFORMATION TYPE 3 SYSTEM INFORMATION TYPE 6 SYSTEM INFORMATION TYPE 4 Location Updating Type LOCATION UPDATING REQUEST M Measurement Information value part MEASUREMENT INFORMATION Measurement Results MEASUREMENT REPORT Mobile Allocation ASSIGNMENT COMMAND DTM ASSIGNMENT COMMAND HANDOVER COMMAND IMMEDIATE ASSIGNMENT IMMEDIATE ASSIGNMENT EXTENDED NOTIFICATION/FACCH SYSTEM INFORMATION TYPE 4 Mobile Identity CIPHERING MODE COMPLETE CM RE-ESTABLISHMENT REQUEST CM SERVICE REQUEST IMMEDIATE SETUP IMMEDIATE SETUP 2 IMSI DETACH INDICATION LOCATION UPDATING REQUEST NOTIFICATION/FACCH NOTIFICATION RESPONSE PAGING REQUEST TYPE 1 PAGING REQUEST TYPE 2 PAGING RESPONSE PACKET NOTIFICATION TALKER IDENTITY Mobile Station Classmark 1 IMSI DETACH INDICATION LOCATION UPDATING REQUEST Mobile Station Classmark 2 CLASSMARK CHANGE 05 RELEASED

ED

EVOLIUM

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 23/639

CM RE-ESTABLISHMENT REQUEST CM SERVICE REQUEST IMMEDIATE SETUP IMMEDIATE SETUP 2 NOTIFICATION RESPONSE PAGING RESPONSE TALKER INDICATION Mobile Station Classmark 3 CLASSMARK CHANGE Mobile Time Difference HANDOVER COMPLETE MultiRate configuration ASSIGNMENT COMMAND CHANNEL MODE MODIFY DTM ASSIGNMENT COMMAND HANDOVER COMMAND Multislot Allocation ASSIGNMENT COMMAND HANDOVER COMMAND N Neighbour Cells Description SYSTEM INFORMATION TYPE 2 SYSTEM INFORMATION TYPE 2bis SYSTEM INFORMATION TYPE 5 SYSTEM INFORMATION TYPE 5bis Neighbour Cells Description 2 SYSTEM INFORMATION TYPE 2ter SYSTEM INFORMATION TYPE 5ter NCC Permitted SYSTEM INFORMATION TYPE 2 SYSTEM INFORMATION TYPE 6 Notification List Number NOTIFICATION/NCH SYSTEM INFORMATION TYPE 6 P P-TMSI Page Mode

PACKET NOTIFICATION IMMEDIATE ASSIGNMENT IMMEDIATE ASSIGNMENT EXTENDED IMMEDIATE ASSIGNMENT REJECT PAGING REQUEST TYPE 1 PAGING REQUEST TYPE 2 PAGING REQUEST TYPE 3

Power command ASSIGNMENT COMMAND DTM ASSIGNMENT COMMAND Power command and access type HANDOVER COMMAND 05 RELEASED

ED

EVOLIUM

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 24/639

Priority Level

CM SERVICE REQUEST

P1 Rest Octets PAGING REQUEST TYPE 1 P2 Rest Octets PAGING REQUEST TYPE 2 P3 Rest Octets PAGING REQUEST TYPE 3 R RACH Control Parameters SYSTEM INFORMATION TYPE 1 SYSTEM INFORMATION TYPE 2 SYSTEM INFORMATION TYPE 2bis SYSTEM INFORMATION TYPE 3 SYSTEM INFORMATION TYPE 4 Request Reference IMMEDIATE ASSIGNMENT IMMEDIATE ASSIGNMENT EXTENDED IMMEDIATE ASSIGNMENT REJECT VGCS UPLINK GRANT Routing Area Identification GPRS SUSPENSION REQUEST DTM INFORMATION RR Cause ASSIGNMENT COMPLETE ASSIGNMENT FAILURE CHANNEL RELEASE DTM ASSIGNMENT FAILURE HANDOVER COMPLETE HANDOVER FAILURE UPLINK RELEASE

RR Packet Uplink Assignment DTM ASSIGNMENT COMMAND PACKET ASSIGNMENT RR Packet Downlink Assignment DTM ASSIGNMENT COMMAND PACKET ASSIGNMENT S Starting Time

ASSIGNMENT COMMAND HANDOVER COMMAND IMMEDIATE ASSIGNMENT IMMEDIATE ASSIGNMENT EXTENDED

Synchronization Indication HANDOVER COMMAND SI 1 Rest Octets SYSTEM INFORMATION TYPE 1 ED EVOLIUM 05 RELEASED LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 25/639

0138_05.doc 15/02/2008

SI 2bis Rest Octets SYSTEM INFORMATION TYPE 2bis SI 2ter Rest Octets SYSTEM INFORMATION TYPE 2ter SI 2quater Rest Octets SYSTEM INFORMATION TYPE 2quater SI 3 Rest Octets SYSTEM INFORMATION TYPE 3 SI 4 Rest Octets SYSTEM INFORMATION TYPE 4 SI 6 Rest Octets SYSTEM INFORMATION TYPE 6 SI 7 Rest Octets SYSTEM INFORMATION TYPE 7 SI 8 Rest Octets SYSTEM INFORMATION TYPE 8 SI 10 Rest Octets SYSTEM INFORMATION TYPE 10 SI 13 Rest Octets SYSTEM INFORMATION TYPE 13 SI 16 Rest Octets SYSTEM INFORMATION TYPE 16 SI 17 Rest Octets SYSTEM INFORMATION TYPE 17 Suspension cause GPRS SUSPENSION REQUEST T Temporary Logical Link Identity GPRS SUSPENSION REQUEST DTM REQUEST GPRS INFORMATION Time Difference HANDOVER COMMAND Timing Advance HANDOVER COMMAND IMMEDIATE ASSIGNMENT IMMEDIATE ASSIGNMENT EXTENDED PHYSICAL INFORMATION VGCS UPLINK GRANT TMSI IMMEDIATE SETUP 2 PAGING REQUEST TYPE 2 PAGING REQUEST TYPE 3 05 RELEASED LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 26/639

ED EVOLIUM

0138_05.doc 15/02/2008

U Uplink access request Uplink Identity Code UPLINK FREE W Wait Indication IMMEDIATE ASSIGNMENT REJECT DTM REJECT

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 27/639

This section is not relevant to SMSCB nor GPRS messages.

DESCRIPTION OF THE HEADER ON THE RADIO INTERFACE

5.1

The header on the radio interface is called header and is composed of three parameters: Protocol discriminator. Transaction identifier or skip indicator. Message type. 6 5 4

GENERAL DESCRIPTION FOR STANDARD L3 MESSAGE

Transaction identifier Protocol Discriminator or skip indicator Message type I.E.

5.1.1

DEFINITION

PROTOCOL DISCRIMINATOR

The purpose of the protocol discriminator is to distinguish between messages belonging to the following procedures. call control mobility management radio resources management other signalling procedures.

The protocol discriminator is the first part of every message and occupies the first four bits of the first octet in a message. BIT DESCRIPTION <----------------> PD Protocol Discriminator value: 4321 0000 Group call control 0011 call control packet mode connection control and call related SS messages 0100 GPRS Transparent Transport Protocol (GTTP) 0101 mobility management messages 0110 radio resources management messages 1001 SMS messages 1011 non call related Supplementary Service messages 1100 Location services 1111 reserved for tests procedures described in relevant 3GPP TSs (not used) All others values are reserved.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 28/639

5.1.2

DEFINITION

TRANSACTION IDENTIFIER/SKIP INDICATOR

The purpose of transaction identifier (TI) is to distinguish multiple parallel activities (transactions) within one mobile station. The TI flag identifies who allocates the TI value for this transaction, so the TI flag resolves simultaneous attempts to allocate the same TI value. BIT DESCRIPTION 8 TI flag TI Flag: 0 1 The message is sent from the side that originates the TI. The message is sent to the side that originates the TI. 7 6 TI value 5 4 3 2 1

TI value: From 0 to 6 The value 7 is reserved for future extension. The transaction identifier for Mobility Management and Radio Resources messages use the predefined value 0 ( it is the skip indicator in this case ).

5.1.3

The message type IE and its use are defined in 3GPP TS 24.007.

MESSAGE TYPE

The bit 7 (and possibly bit 8, see below), N(SD), is reserved for the sequencing of the Mobility Management and Connection Management messages to avoid duplication of messages. The skip indicator and send sequence number N(SD) are not checked by the BSS. Note: Case of BCCH and AGCH/PCH messages

The messages are structured as standard L3 messages plus one octet in front, the L2 pseudo length octet, and a rest octet part at the end. 5.1.3.1 Coding of message type IE when accessing Release 98 and older networks Message Type I.E. of MM, CC, SS, GCC, BCC and LCS messages is coded as follows when accessing Release 98 and older networks : 8 0 7 N(SD) 6 5 4 3 2 1 Message type

Message Type I.E. of messages other than MM, CC, SS, GCC, BCC and LCS is coded as follows when accessing Release 98 and older networks : 8 7 6 5 4 3 2 1 Message type ED EVOLIUM 05 RELEASED LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 29/639

0138_05.doc 15/02/2008

5.1.3.2

Coding of message type IE when accessing Release 99 and newer networks

Header of MM, CC and SS messages is coded as follows when accessing Release 99 and newer networks : 8 7 6 5 4 3 2 1 N(SD) or 0 Message type

Message Type I.E. of GCC, BCC and LCS messages is coded as follows when accessing Release 99 and newer networks : 8 0 7 N(SD) or 0 6 5 4 3 2 1 Message type

Message Type I.E. of messages other than MM, CC, SS, GCC, BCC and LCS is coded as follows when accessing Release 998 and newer networks : 8 7 6 5 4 3 2 1 Message type 5.1.3.3 8 0 7 0 Message Type 6 1 5 1 4 1 3 1 0 1 0 0 2 0 1 1 0 1 1 0 1 1 1 0 Hex 3C 3B 3F 39 3A Channel establishment messages: - RR INITIALISATION REQUEST (not used) - ADDITIONAL ASSIGNMENT (not used) - IMMEDIATE ASSIGNMENT - IMMEDIATE ASSIGNMENT EXTENDED - IMMEDIATE ASSIGNMENT REJECT

1 0

0 1 0 0 1 1 0 1

1 0 0 1 1 0 1 1 2E 29 2F 38 39 3B 35 32

Ciphering messages: - CIPHERING MODE COMMAND - CIPHERING MODE COMPLETE Configuration change messages: - CONFIGURATION CHANGE COMMAND (not used) - CONFIGURATION CHANGE ACK (not used) - CONFIGURATION CHANGE REJECT (not used) Handover messages: - ASSIGNMENT COMMAND - ASSIGNMENT COMPLETE - ASSIGNMENT FAILURE LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 30/639

0 0 0

1 0 1

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

3 0 1 0 1 0 0 1 0 1

2 1 0 0 0 0 1 0 1 1 0 1 0 1 0 1

1 1 0 0 1 0 1 1 0 1 1 0 0 1 0 0

Hex 2B 2C 28 2D 08 23

- HANDOVER COMMAND - HANDOVER COMPLETE - HANDOVER FAILURE - PHYSICAL INFORMATION - RR-CELL CHANGE ORDER (not used) - PDCH ASSIGNMENT COMMAND (not used) Channel release messages:

0 0 0

0 0 0

0 1 0

0 0 0

1 0 1

OD OA OF

- CHANNEL RELEASE - PARTIAL RELEASE (not used) - PARTIAL RELEASE COMPLETE (not used) Paging and Notification messages:

0 0 1 1 0 1

21 22 24 27 20 26

- PAGING REQUEST TYPE 1 - PAGING REQUEST TYPE 2 - PAGING REQUEST TYPE 3 - PAGING RESPONSE - NOTIFICATION/NCH - NOTIFICATION RESPONSE

0 0 0 1

0 1 1 0

0 0 1 0

60 62 63 64

3G Specific messages: - UTRAN CLASSMARK CHANGE - CDMA 2000 CLASSMARK CHANGE (not used) - INTER SYSTEM TO UTRAN HANDOVER COMMAND - INTER SYSTEM TO CDMA2000 HANDOVER COMMAND (not used) System information messages:

0 0 0 0 1 1 1 1

0 0 1 1 0 0 1 1 1 1 1 0 1 0 0 0

0 1 0 1 0 1 0 1 0 1 1 1 0 0 0 1 02 03 07 05 06 04 00 01 18 19 1A 1B 1C 1D 1E 1F

- SYSTEM INFORMATION TYPE 8 - SYSTEM INFORMATION TYPE 1 - SYSTEM INFORMATION TYPE 2 - SYSTEM INFORMATION TYPE 3 - SYSTEM INFORMATION TYPE 4 - SYSTEM INFORMATION TYPE 5 - SYSTEM INFORMATION TYPE 6 - SYSTEM INFORMATION TYPE 7 System information messages: - SYSTEM INFORMATION TYPE 2bis - SYSTEM INFORMATION TYPE 2ter - SYSTEM INFORMATION TYPE 2quater - SYSTEM INFORMATION TYPE 5bis - SYSTEM INFORMATION TYPE 5ter - SYSTEM INFORMATION TYPE 9 (not used) - SYSTEM INFORMATION TYPE 13 - SYSTEM INFORMATION TYPE 14 (not used)

0 0 1 1 1 1 0 0

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 31/639

8 0

7 0

6 1

5 1

4 1

3 1 1

2 0 1 0 0 0 1 0 1 1 0 0 1 1 1 1 0

1 1 0 0 0 1 0 0 0 1 0 1 0 1 0 1 0

Hex 3D 3E 44 40 41 42

System information messages: - SYSTEM INFORMATION TYPE 16 - SYSTEM INFORMATION TYPE 17 System information messages: - SYSTEM INFORMATION TYPE 15 (not used) - SYSTEM INFORMATION TYPE 18 (not used) - SYSTEM INFORMATION TYPE 19 (not used) - SYSTEM INFORMATION TYPE 20 (not used) Miscellaneous messages:

1 0 0 0 0 0 1 1 1 1 0 1 1 1

0 0 0

0 0 0

1 1 1

1 1 1

0 0 0

10 12 17 14 15 16 13 36 37 34

- CHANNEL MODE MODIFY - RR STATUS (not used) - CHANNEL MODE MODIFY ACKNOWLEDGE - FREQUENCY REDEFINITION (not used) - MEASUREMENT REPORT - CLASSMARK CHANGE - CLASSMARK ENQUIRY - EXTENDED MEASUREMENT REPORT - EXTENDED MEASUREMENT ORDER - GPRS SUSPENSION REQUEST

0 0 0 0 0

0 0 0 0 0

0 0 0 1 0

0 0 0 0 1

1 1 1 0

0 1 0 0

0 1 1 0

1 0 0 1 09 0E 2A 11

VGCS uplink control messages: VGCS UPLINK GRANT UPLINK RELEASE UPLINK BUSY TALKER INDICATION Application messages:

0 0

0 1

1 0

1 0

1 1

0 0 0 0 0 1 1 1

0 0 0 1 1 0 0 1

0 0 1 0 1 0 1 0

38 48 49 4A 4B 4C 4D 4E

APPLICATION INFORMATION DTM control messages: - DTM ASSIGNMENT FAILURE - DTM REJECT - DTM REQUEST - PACKET ASSIGNMENT - DTM ASSIGNMENT COMMAND - DTM INFORMATION - PACKET NOTIFICATION GTTP messages

00

GPRS INFORMATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 32/639

8 0 0 0 0

7 X X X X

6 0 0 1 1

5 0 0 0 0

4 0 1 0 1

3 0 0 1 0

2 0 0 0 0

1 1 0 0 0

Hex

MM non-transparent messages: - IMSI DETACH INDICATION - LOCATION UPDATING REQUEST - CM SERVICE REQUEST - CM RE-ESTABLISHMENT REQUEST GCC non transparent messages (Note 1)

0 0

X X

1 1

1 1

0 1

0 0

0 1

1 1

IMMEDIATE SETUP IMMEDIATE SETUP 2

NOTE:

Bit 8 is reserved for possible future use as an extension bit. Bit 7 is reserved for the send sequence number in GCC messages sent from the MS. In GCC messages sent from the network, bit 7 is coded with a "0", see 3GPP TS 24.007.

In some protocols, the structure of part or all of the messages might not always follow the standard L3 message structure. As a design rule, this should be consistent for a given protocol, direction and lower layer SAP. 5.2.1 Messages using the short header format

5.2

GENERAL DESCRIPTION FOR NON STANDARD L3 MESSAGE

The messages are structured either as standard L3 messages, or in the so-called short header format.

The value of the 8th bit (bit 1 of octet 1) of the link layer PDU distinguishes the two cases. In the case of the short header, the L3 message is the same bit string as the link layer PDU, and has a fixed length. The following description includes the 2-bit link layer header. 5.2.1.1 Bits 1 and 2 are the link layer header. Bit 2 of octet 1 is set to "0", and bit 1 is reserved for the link layer. A protocol discriminator is the first part of the message (starting bit 8 of octet 1). The protocol discriminator field may have different lengths. The following protocol discriminator is defined: 0 RR. The first octet

All additional PD defined for this structure shall start by 1. The reception of a message with bit 8 of octet 1 set to 1 when expecting a message structured as defined by this clause shall be diagnosed as an unknown PD, and the message ignored. As a design rule, a message type field should follow the PD, and of a length such that the PD and the message type fit in the 6 first bits of the message. 5.2.1.2 The rest of the structure is not more constrained. 5.2.1.3 MESSAGE TYPE The rest of the message

The message type IE and its use are defined in 3GPP TS 24.007. Message Type: ED EVOLIUM 05 RELEASED
0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 33/639

RR sh ort PD

6 5 4 3 Message type

0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 0 1 0 0 0 1 0 0 1

2 1 Short layer 2 heade r 0 0

Hex

System information messages: 00 01 02 04 05 System Information Type 10 Notification/FACCH Uplink Free Enhanced Measurement Report (uplink) (not used) Measurement Information (downlink)

5.2.2

Some messages do not follow the basic format. Each messages has a specific format. Channel request Uplink access

Other formats

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 34/639

6 6.1

RADIO INTERFACE MESSAGES FOR GSM APPLICATION INFORMATION


RADIO SDCCH/FACCH 44.018

NAME

APPLICATION INFORMATION ABIS BTS Transparent A

INTERFACE CHANNEL /USAGE 3GPP-REF FUNCTION

This message is sent on the main DCCH by the network or the mobile station to convey an embedded Application Protocol Data Unit (APDU) or APDU segment between the network and the mobile station. DIRECTION From BSC To MS From MS To BSC INFORMATION ELEMENT NAME TYPE COMMENT LENGTH (byte) Header MF 2 IE APDU ID MF 1/2 LIST APDU flags MF 1/2 APDU Data MV 2-n IMPLEMENTATION MAXIMUM LENGTH 5-n NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. Note 1 : If APDU Contains Measure Request Position See Note 1 LCS Functional Specification, ref. [28] ABNORMAL SITUATION See Note 1 TIMER

Following event, normal situation Measure Position Response

Measure Position Response Assistance Data Assistance Data Ack Protocol Error

Following event, abnormal situation Measure Position Response Protocol Error Protocol Error

Timer

Assistance Data Ack

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE APPLICATION INFORMATION 3BK 11203 0138 DSZZA 35/639

6.1.1

GENERAL DESCRIPTION 8 7 C/R 6 5 4 3 2 1 0 first seg last seg Length APDU information Protocol Identifier

APDU ID APDU Flags APDU Data

6.1.2

TYPE: M

APDU ID

The APDU ID information element identifies the particular protocol and associated application for an APDU. It is a type 1 I.E. BIT DESCRIPTION 8 APDU ID I.E.I 7 6 5 4 Protocol Identifier 3 2 1 octet 1

DEFINITION

SUB PARAMETER DEFINITION Protocol identifier (octet 1) Bits Protocol / Application 4321 0000 RRLP (3GPP TS 04.31)/ LCS 0001 to reserved for future use 1111 PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE APPLICATION INFORMATION 3BK 11203 0138 DSZZA 36/639

6.1.3

TYPE: M

APDU Flags

The APDU Flags information element provides segmentation and control information for an associated APDU. It is a type 1 I.E. BIT DESCRIPTION 8 APDU ID I.E.I 7 6 5 0 spare 4 C/R 3 first seg. 2 last seg. 1 octet 1

DEFINITION

SUB PARAMETER DEFINITION Last Segment (octet 1) bit 1 0 Last or only segment 1 Not last or only segment First Segment (octet 1) bit 2 0 First or only segment 1 Not first or only segment C/R (octet 1) If last seg. = 0, then: bit 3 0 Command or Final Response 1 Not Command or Final Response If last seg. = 1, then bit 3 is spare and set to 0 Note : as shown in 6.1.1, the 4 bits are coded on bits 5 to 8, while the Protocol Identifier of APDU I.E. is coded on bits 1 to 4. PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE APPLICATION INFORMATION 3BK 11203 0138 DSZZA 37/639

6.1.4

TYPE: M

APDU Data

The purpose of the information element is to provide an APDU or APDU segment. BIT DESCRIPTION

DEFINITION

The APDU Data is a type 4 information element with minimum length of 1 octet (as it is a LV type information element). No upper length limit is specified except for that given by the maximum number of octets in a L3 message (3GPP TS 04.06). 8 7 6 5 4 3 Length of APDU contents APDU Information 2 1 octet 1 octet 2-n

APDU Information (octets 2-n)

Contains an RRLP message as defined in 3GPP TS 04.31.

NOTE 1: Messages are segmented on octet boundaries. Zero bits are used, where necessary, to pad out the last segment to an octet boundary. PARAMETER ORIGIN - ACTION ON PARAMETER Measure Position Request Assistance Data Protocol Error

The RRLP message may be one of the following messages : Measure Position Response Assistance Data Ack

These messages are described in the following paragraphs. 6.1.4.1 Measure Position Request This component is used by the SMLC to request location measurements or a location estimate from the MS. It includes QoS, other instructions, and possible assistance data to the MS. The complete ASN.1 coding is not given below (see 3GPP TS 04.31 for details), a short description of the information elements is given. Name positionInstruct referenceAssistData msrAssistData systemInfoAssistData gps-AssistData extensionContainer ED EVOLIUM 05 Usage QoS related information (precision requirements, response time, radio environnement characterisation) information related to the BTS used for E-OTD information related to the BTS used for E-OTD information related to the BTS used for E-OTD GPS related information (time, satellites description ) information related to E-OTD Type MANDATORY OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL not used Comments See possible values below not used not used not used

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE APPLICATION INFORMATION 3BK 11203 0138 DSZZA 38/639

rel98-MsrPosition-Reqextension

information related to E-OTD

OPTIONAL

not used

msAssisted msBased msBasedPref msAssistedPref PositionMethod e-OTD not used GPS GPS or e-OTD not used MeasureResponseTime value N = 0-7 inducing 2N seconds useMultipleSets multipleSets not used OneSet The optional information environmentCharacter is not sent by the Alcatel BSS. 6.1.4.2 Measure Position Response This component is used by the MS to respond to a Measure Position Request from the SMLC with location measurements, a location estimate, or an error indication. The complete ASN.1 coding is not given below (see 3GPP TS 04.31 for details), a short description of the information elements is given. Name multipleSets referenceIdentity otd-MeasureInfo locationInfo gps-MeasureInfo locationError extensionContainer rel-98-MsrPositionRsp-Extension LocationInfo values : refFrame gpsTOW fixType posEstimate Usage usage of multiple sets information related to the BTS used for E-OTD information related to E-OTD measurements information related to GPS measurements information related to GPS measurements Error codes in case of failure information related to E-OTD measurements Type OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL See possible values below not used Comments not used in current version of the protocol not used not used

positionInstruct values : MethodType

065535 0..14399999 twoDFix (0) threeDFix (1) ellipsoid point ellipsoid point with uncertainty circle ellipsoid point with uncertainty ellipse ellipsoid point with altitude ellipsoid point with altitude and uncertainty ellipsoid

LocationError values : 0 unDefined 1 notEnoughBTSs 2 notEnoughSats 3 eotdLocCalAssDataMissing 4 eotdAssDataMissing 5 gpsLocCalAssDataMissing ED EVOLIUM 05 RELEASED

not used not used not used LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE APPLICATION INFORMATION 3BK 11203 0138 DSZZA 39/639

0138_05.doc 15/02/2008

6 7 8 9 10

gpsAssDataMissing methodNotSupported notProcessed refBTSForGPSNotServingBTS refBTSForEOTDNotServingBTS

not used

6.1.4.3 Assistance Data This component is used by the SMLC to deliver assistance data for location measurement and/or location calculation. The complete ASN.1 coding is not given below (see 3GPP TS 04.31 for details), a short description of the information elements is given. Name referenceAssistData msrAssistData systemInfoAssistData gps-AssistData moreAssDataToBeSent Usage information related to the BTS used for E-OTD information related to the BTS used for E-OTD information related to the BTS used for E-OTD GPS related information (time, satellites description ) Indication whether This is the only or last Assistance Data message used to deliver the entire set of assistance data or if other Assistance Data messages will follow. information related to E-OTD measurements Type OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL If not present, interpret as only Assistance Data component used to deliver entire set of assistance data not used Comments not used not used not used

extensionContainer rel98-AssistanceDataExtension

OPTIONAL OPTIONAL

6.1.4.4 Assistance Data Ack This component does not have any information contents. It presence indicates that the MS has received the complete Assistance Data component. 6.1.4.5 Protocol Error This component is used by the receiving entity (SMLC or MS) to indicate to the sending entity, that there is a problem that prevents the receiving entity to receive a complete and understandable component. Note : this message is not sent by the SMLC in Alcatel first implementation. -- Protocol Error component ProtocolError ::= SEQUENCE { errorCause ErrorCodes, extensionContainer ExtensionContainer ... } Following error codes are defined : 0 unDefined 1 missing Component 2 incorrectData 3 missingIEorComponentElement 4 messageTooShort ED EVOLIUM 05 RELEASED LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE APPLICATION INFORMATION 3BK 11203 0138 DSZZA 40/639

OPTIONAL,

0138_05.doc 15/02/2008

unknowReferenceNumber

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE APPLICATION INFORMATION 3BK 11203 0138 DSZZA 41/639

6.2

ASSIGNMENT COMMAND
NAME ASSIGNMENT COMMAND RADIO SDCCH/FACCH 44.018 This message is sent on the main DCCH from the BSC to the Mobile Station to change the channel configuration to another independent dedicated channel configuration. From BSC To MS INFORMATION ELEMENT NAME TYPE COMMENT LENGTH (byte) 2 3 1 4-131* 17 3-12* 2 2* 2* 2* 2* 2* 2* 2* 4 2 3-10 3 4-132* 4* 4* 10* 3-10* 1* 3* 4-8 3-15 (4) TIMER T3107 ABIS BTS Transparent A

INTERFACE CHANNEL /USAGE 3GPP-REF FUNCTION DIRECTION

IE LIST

Header Description of the 1st Channel, after time M V Power Command M V Frequency List, after time C TLV Cell Channel Description O TV Description of the multislot configuration C TLV Mode of the 1st Channel (Channel Set 1) O TV Mode of Channel Set 2 O TV Mode of Channel Set 3 O TV Mode of Channel Set 4 O TV Mode of Channel Set 5 O TV Mode of Channel Set 6 O TV Mode of Channel Set 7 O TV Mode of Channel Set 8 O TV Description of the 2nd Channel, after time O TV Mode of the 2nd Channel O TV Mobile Allocation, after time C TLV Starting Time O TV Frequency List, before time C TLV Description of the 1st Chan., before time O TV Description of the 2nd Chan., before time O TV Frequency Channel Seq. ,before time C TV Mobile Allocation, before time C TLV Cipher Mode Setting O TV VGCS target mode Indication O TLV MultiRate configuration O TLV VGCS Ciphering Parameters O TLV IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION

(1) (2) (5) Not used Not used Not used Not used Not used Not used Not used Not used Not used (3) Not used Not used Not used Not used Not used Not used Not used (7) (6) Not used

ABNORMAL SITUATION ASSIGNMENT FAILURE (ref. [3]) (ref. [6])

FOLLOWING EVENT SPECIF DOC. REF.

ASSIGNMENT COMPLETE Normal assignment procedure Internal handover

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 42/639

* New elements introduced in GSM Phase 2 (1) Used in the two following cases: i) Used for Phase 2 biband MS when the assigned channel is hopping in the P-GSM band or ii) used for any MS when the assigned channel is hopping in the EGSM (and not in the P-GSM), GSM850, DCS1800 or DCS1900 band. (2) Used for Phase 1 monoband P-GSM MS or for Phase 2 monoband P-GSM or for Phase 2 monoband E-GSM MS when the assigned channel is hopping in the P-GSM band. (3) Used for Phase 1 monoband P-GSM MS or for Phase 2 monoband P-GSM or for Phase 2 monoband E-GSM MS when the assigned channel is hopping in the P-GSM band. (4) The length depends on the network category, the number max of frequencies in Frequency List (maximum 64 frequencies), and the MS type (See below table):
MS band capability Frequency band of the allocated radio resource P-GSM DCS1800 DCS1900 GSM850 Max. length of the Assignment Command message 43 60 60 34 Comments

PGSM DCS1800 or DCS1800-GSM850 or DCS1800-GSM900 DCS1900 or DCS1900-GSM850 E-GSM, GSM850, GSM850-DCS1800, or GSM850-DCS1900

With CA + MA With Range_512 With Range_512 With variable bitmap

(6) (7)

(5) This field is always included, although optional.

This field is only included for calls established with AMR codec. This field is only included for the talker of a voice group call.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 43/639

6.2.1 6.2.1.1

GENERAL DESCRIPTION Assigned channel in the P-GSM band Phase 1 monoband P-GSM MS

6.2.1.1.1

The assigned channel is assumed hopping on more than one frequency in the P-GSM band. 8 0 0 7 0 0 6 1 0 5 0 0 4 1 0 3 1 1 2 1 1 1 0 0

Channel type and TDMA offset Channel, Description Power Command TSC H=0-> H=1->

MAIO low part 0 0 0 1 0 1 0

A R F C N (low part) 0 0

spare HSN

MAIO (high part)

TN

ARFCN (Hpart)

Power level 124 CA ARFCN CA ARFCN ......................... ........... CA ARFCN 005 004 0 0 Mode 1 0 0 123 0 122 1 121 Optional 17 octets 0

Cell Channel Description

0 0 FORMAT-ID 120 008 0 0 007 1 1 MA C 8n-1

113 003 0 0 002 1 1 001 1 0 MA C 8n-7 MA C 1

Channel Mode

006 1 1

Optional

Mobile Allocation

MA C 8n MA C 8

Length (value 8 )

Conditional 3-10 octets

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 44/639

6.2.1.1.2

Phase 2 monoband P-GSM or E-GSM MS

The assigned channel is assumed hopping on more than one frequency in the P-GSM band. 8 0 0 Description of the First Channel, after time Power Command Cell Channel Description 7 6 5 0 0 0 0 1 0 Channel type and TDMA offset TSC H=1-> H=0-> 4 0 1 2 1 1 TN MAIO (high part) 3 1 1 1 0 0

MAIO low part EPC mode 0 1 0 0 FORMAT-ID 120 008 0 0 ext 1 ext 0 0 MA C 8n MA C 8 0 007 0 DA 7 UA 7 1 1 MA C 8n-1 0

Description of the multislot configuration

spare ARFCN (Hpart) HSN A R F C N (low part) FPC_E Power level PC 1 0 0 0 1 0 0 0 124 123 122 121 CA ARFCN CA ARFCN ......................... 113 ........... CA ARFCN 006 005 004 003 002 001 0 1 0 0 0 0 DA 6 UA 6 1 1 Length = 2 DA DA 5 4 UA UA 5 4 0 0 1 0 Length (value 8 ) Mode DA 3 UA 3 0 0 DA 2 UA 2 1 1 DA 1 UA 1 1 0 MA C 8n-7 MA C 1 1 1 spare

Optional 17 octets

Optional

Mode of the First Channel (Channel Set 1) Mobile Allocation, after time

Optional

Conditional 3-10 octets

VGCS target mode Indication (Note 1) MultiRate configuration (Note 2)

Target mode 0 0

0 0 0 0 Length of VGCS target mode Indic. Group cipher key number 0

0 1 spare 1

Optional 3 octets

0 0 0 Length (value 6) Multirate speech version NSCB ICMI spare Parameters for MultiRate speech

Start mode

Optional 4-8 octets

Note 1: This field is only included for the talker of a voice group call. ED EVOLIUM 05 RELEASED LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 45/639

0138_05.doc 15/02/2008

Note 2: This field is only included for calls established with AMR codec. 6.2.1.1.3 Phase 2 biband MS

For phase 2 biband MS the "Frequency List, after time" is always used to assigned a channel hopping on more than one frequency in the P-GSM band because it is the shortest way of coding frequencies, see section 6.2.1.2 for the description. 6.2.1.2 Assigned channel in the E-GSM, GSM850, DCS1800 or DCS1900 band

When the assigned channel is hopping on more than one frequency in the E-GSM, GSM850, DCS1800 or DCS1900 band, the Frequency List IE is used with Range 1024, range 512, range 256 or range 128 format: 7 6 5 4 3 2 1 0 0 0 0 1 1 0 0 1 0 1 1 1 0 Channel type and TDMA offset TN TSC H=1-> MAIO (high part) H=0-> spare ARFCN (Hpart) MAIO low part HSN A R F C N (low part) 0 EPC FPC_E Power level mode PC 0 0 0 0 0 1 0 1 Length of frequency list contents 1 0 0 0 FORMAT-ID ORIGFORMAT-ID (continued) ARFCN Note 1 high ORIG-ARFCN (middle part) ORIGW(1) (high part) ARFCN (low) W(1) W(2) (high part) (low part) W(2) to W(3) are on 8 bits, when present; W(4) to W(7) are on 7 bits, when present; W(8) to W(15) are on 6 bits, when present; W(16) to W(31) are on 5 bits, when present; W(32) to W(63) are on 4 bits, when present. .. .. .. 0 0 0 1 0 0 0 0 Length = 2 0 DA DA DA DA DA DA DA ext 7 6 5 4 3 2 1 1 UA UA UA UA UA UA UA ext 7 6 5 4 3 2 1 0 1 1 0 0 0 1 1 0 0 Mode 0 0 0 0 Length of VGCS target mode Indic. Group cipher key number 0 1 spare 1 1 spare 8 0 0

Description of the First Channel, after time Power Command

Frequency List, after time

Optional

Description of the multislot configuration

Optiona l

Mode of the First Channel (Channel Set 1) VGCS target mode Indication

Target mode RELEASED

Optional 3 octets

ED EVOLIUM

05

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 46/639

MultiRate configuration (Note 2)

0 0 Length (value 6 ) NSCB ICMI

0 spare

1 Start mode

Optional 4-8 octets

Multirate speech version

Parameters for MultiRate speech Note1: 0 x x: 1 0 0: 1 0 1: 1 1 0: 1 1 1: Range 1024 format; Range 512 format; Range 256 format; Range 128 format; Variable bit map

Note 2: This field is only included for calls established with AMR codec. Or with variable bitmap format: 8 0 0 7 0 0 6 0 1 5 0 0 H=1-> 4 0 1 3 1 1 2 1 1 TN 1 0 0

Description of the First Channel, after time

Channel type and TDMA offset TSC MAIO low part 0 0 0 0 0 0 0 0 H=0->

MAIO (high part) spare HSN Power level 1 0 1 ARFCN (Hpart)

A R F C N (low part)

Power Command

Frequency List, after time

(Note 1) Description of the multislot configuration

Mode of the First Channel (Channel Set 1)

1 1 ORIGFORMAT-ID ARFCN (continued) high ORIG-ARFCN (middle part) ORIG- RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFC ARFCN 1 2 3 4 5 6 N (low) 7 .. .. .. RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFC 8k-40 8k-39 8k-38 8k-37 8k-36 8k-35 8k-34 N 8k-33 0 0 0 1 0 0 0 0 Length 0 DA DA DA DA DA DA DA ext 7 6 5 4 3 2 1 1 UA UA UA UA UA UA UA ext 7 6 5 4 3 2 1 0 1 1 0 0 0 1 1 Mode

1 0 FORMAT-ID

Length of frequency list contents 0 0 1

Optional

Optional

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 47/639

VGCS target

mode Indication

Target mode 0 0

Length of VGCS target mode Indic. Group cipher key number 0 NSCB 0 ICMI 0 0 spare

0 1 spare 1

1 1 spare

3 octets

Optional

MultiRate configuration (Note 2)

Length (value 6 ) Multirate speech version Start mode

Optional 4-8 octets

Parameters for MultiRate speech Notes: 1) k indicates the octet number of the I.E. Frequency List, after time. k 132. 2): This field is only included for calls established with AMR codec.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 48/639

6.2.2

Channel Description / CHANNEL DESCRIPTION - Phase 1

TYPE: M DEFINITION

To provide a description of an allocatable channel together with its SACCH. BIT DESCRIPTION 8 Channel type and TDMA offset TSC H=1-> H=0-> 7 6 5 4 3 TN 2 1 1 3

MAIO low part

MAIO (high part) spare ARFCN (Hpart) HSN A R F C N (low part)

SUB PARAMETER DEFINITION Octet 1: Channel type and TDMA offset: Bits 8 0 0 0 0 7 0 0 0 1 6 0 0 1 T 5 0 1 T T 4 1 T T T TCH/F + ACCHs TCH/H + ACCHs SDCCH/4 + SACCH/C4 or CBCH (SDCCH/4) SDCCH/8 + SACCH/C8 or CBCH (SDCCH/8) all other values reserved

T bit indicates the subchannel number. TN : Time slot (0 to 7) Octets 2 and 3: TSC : Training Sequence Code (0 to 7) H : "0" Single RF channel "1" RF hopping channel

Channel selector: H = "0": The channel selector field consists of the absolute RF channel number. Bits 4 3: 0 0 spare ARFCN: Octet 3 Octet 4 Bits 2, 1 Bits 8 to 1 High part of ARFCN ARFCN low part

H = "1":

The ARFCN is coded as the binary representation of the absolute RF channel Number. Range: 0 to 1023

The channel selector field consists of the mobile allocation index offset, MAIO, and the hopping sequence number, HSN. LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 49/639

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

MAIO: Octet 3 Octet 4

Bits 4 to 1 Bits 8 to 7

high part low part

HSN (Octet 4, Bits 1 to 6): Value 0 to 63. The HSN field is coded as the binary representation of the hopping sequence number.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 50/639

6.2.3

TYPE: M

Description of the First Channel, after time / CHANNEL DESCRIPTION 2 - Phase 2

DEFINITION

To provide a description of an allocatable channel together with its SACCH. BIT DESCRIPTION 8 Channel type and TDMA offset TSC H=1-> H=0-> 7 6 5 4 3 TN 2 1 1 3

MAIO low part SUB PARAMETER DEFINITION Octet 1:

MAIO (high part) spare ARFCN (Hpart) HSN A R F C N (low part)

Channel type and TDMA offset: Bits 87654 00000 TCH/F + FACCH/F and SACCH/M at the timeslot indicated by TN, and additional bidirectional or undirectional TCH/Fs and SACCH/Ms according to the multislot allocation information element 00001 TCH/F + FACCH/F and SACCH/F 0001T TCH/H + ACCHs 001TT SDCCH/4 + SACCH/C4 or CBCH (SDCCH/4) 01TTT SDCCH/8 + SACCH/C8 or CBCH (SDCCH/8) In the description below "n" is the timeslot number indicated by TN. The description is valid only if all the indicated timeslot numbers are in the rang 0 to 7. 1 0 X X X TCH/F + FACCH/F and SACCH/M at the time slot indicated by TN, and additional bidirectional TCH/Fs and SACCH/Ms at other timeslots according to the following: XXX 0 0 0 no additional timeslots 0 0 1 at timeslot n-1 0 1 0 at timeslot n+1, n-1 0 1 1 at timeslot n+1, n-1 and n-2 1 0 0 at timeslot n+1, n-1, n-2, and n-3 1 0 1 at timeslot n+1, n-1, n-2, n-3 and n-4 1 1 0 at timeslot n+1, n-1, n-2, n-3, n-4 and n-5 1 1 1 at timeslot n+1, n-1, n-2, n-3, n-4, n-5 and n-6 11001 to 11011 11001 11010 11011 11110 TCH/F + FACCH/F and SACCH/M at the time slot indicated by TN and additional unidirectional TCH/FDs and SACCH/MDs at other timeslots according to the following: at timeslot n-1 at timeslot n+1, n-1 at timeslot n+1, n-1 and n-2 TCH/F + FACCH/F and SACCH/M at the time slot indicated by TN and additional bidirectional TCH/F and SACCH/M at timeslot n+1 and unidirectional TCH/FD and SACCH/MD at timeslot n-1 All other values reserved LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 51/639

T bit indicates the subchannel number. ED EVOLIUM 05 RELEASED

0138_05.doc 15/02/2008

TN : Time slot (0 to 7) Octets 2 and 3: TSC : Training Sequence Code (0 to 7) H : "0" Single RF channel "1" RF hopping channel

Channel selector: H = "0": The channel selector field consists of the absolute RF channel number. Bits 4 3: 0 0 spare ARFCN: Octet 3 Octet 4 Bits 2, 1 Bits 8 to 1 High part of ARFCN ARFCN low part

H = "1":

The ARFCN is coded as the binary representation of the absolute RF channel Number. Range: 0 to 1023 The channel selector field consists of the mobile allocation index offset, MAIO, and the hopping sequence number, HSN. Bits 4 to 1 Bits 8 to 7 high part low part

MAIO: Octet 3 Octet 4

PARAMETER ORIGIN - ACTION ON PARAMETER

HSN (Octet 4, Bits 1 to 6): Value 0 to 63. The HSN field is coded as the binary representation of the hopping sequence number.

This parameter is transparent for the BTS when received. At the BSC site, the BSC has to provide the following information: Channel type and TDMA offset and TN depends of the resource to be allocated by the resource manager. H: fixed value according if hopping is used or not (this information has to be provided by O&M). Channel selector.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 52/639

6.2.4

TYPE: M

POWER COMMAND

To provide the power level for the Mobile Station. BIT DESCRIPTION 8 0 EPC mode 7 FPC_ EPC 6 5 4 Power level 3 2 1 1

DEFINITION

Bits 8 of octet 1 are spare bits (coded as 0). SUB PARAMETER DEFINITION EPC_mode The EPC mode field indicates whether the assigned channel(s) shall be in enhanced power control (EPC) mode. It is only valid for channels on which EPC may be used. It is coded as follows: 0 Channel(s) not in EPC mode 1 Channel(s) in EPC mode, not used FPC_EPC The FPC_EPC field (octet 2) has different interpretation depending on the channel mode of the assigned channed(s) and the value of the EPC mode field. If the channel mode is such that fast power control (FPC) may be used, the FPC_EPC field indicates whether Fast Measurement Reporting and Power Control mechanism is used. It is coded as follows: 0 FPC not in use 1 FPC in use, not used If the channel mode is such that EPC may be used and the EPC mode field indicates that the channel is in EPC mode, the FPC_EPC field indicates whether EPC shall be used for uplink power control. It is coded as follows: 0 EPC not in use for uplink power control, not used 1 EPC in use for uplink power control, not used Power level: binary representation of the power control level (0 to 31) GSM phase 1

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 53/639

Power Control level 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 GSM phase 2 Power Control level 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Peak power 43 dBm 41 dBm 39 dBm 37 dBm 35 dBm 33 dBm 31 dBm 29 dBm 27 dBm 25 dBm 23 dBm 21 dBm 19 dBm 17 dBm 15 dBm 13 dBm

GSM-900 Binary value 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Peak power 30 dBm 28 dBm 26 dBm 24 dBm 22 dBm 20 dBm 18 dBm 16 dBm 14 dBm 12 dBm 10 dBm 8 dBm 6 dBm 4 dBm

DCS-1800 Binary value 0 1 2 3 4 5 6 7 8 9 10 11 (note 1) 12 (note 1) 13 (note 1)

GSM-900

DCS-1800

GSM-850

Peak power Binary value Peak power Binary value Peak Power Binary value 30 dBm 0 28 dBm 1 39 dBm 2 26 dBm 2 39 dBm 2 37 dBm 3 24 dBm 3 37 dBm 3 35 dBm 4 22 dBm 4 35 dBm 4 33 dBm 5 20 dBm 5 33 dBm 5 31 dBm 6 18 dBm 6 31 dBm 6 29 dBm 7 16 dBm 7 29 dBm 7 27 dBm 8 14 dBm 8 27 dBm 8 25 dBm 9 12 dBm 9 25 dBm 9 23 dBm 10 10 dBm 10 23 dBm 10 21 dBm 11 8 dBm 11 21 dBm 11 19 dBm 12 6 dBm 12 19 dBm 12 17 dBm 13 4 dBm 13 17 dBm 13 15 dBm 14 2 dBm 14 15 dBm 14 13 dBm 15 0 dBm 15 13 dBm 15 11 dBm 16 11 dBm 16 9 dBm 17 9 dBm 17 7 dBm 18 7 dBm 18 5 dBm 19 5 dBm 19

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 54/639

Power Control level 30 31 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

DCS-1900 Peak power 33dBm 32dBm 30dBm 28dBm 26 dBm 24 dBm 22 dBm 20 dBm 18 dBm 16 dBm 14 dBm 12 dBm 10 dBm 08 dBm 06 dBm 04 dBm 02 dBm 0 dBm

Note 1: These power control levels are not authorised for MS DCS-1800 class 1. They are only used by the MS class 2. PARAMETER ORIGIN - ACTION ON PARAMETER The parameter is transparent for the BTS. At the BSC site, this parameter is given to the Mobile Station according to the classmark information received from the MS. 6.2.5 FREQUENCY LIST, after time / FREQUENCY LIST

TYPE: C

To provide the absolute radio frequency channel numbers used in a cell. BIT DESCRIPTION Bit map 0 format 8 0 supported but not used 7 0 6 0 5 0 4 0 3 1 2 0 1 1 1 3 4 18

DEFINITION

0 0 0 0 ARFCN ARFCN ARFCN ARFCN FORMAT-ID 124 123 122 121 ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN 120 119 118 117 116 115 114 113 : : ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN 008 007 006 005 004 003 002 001 Range 1024 format supported

Length of frequency list contents =16

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 55/639

8 0

7 0

6 0

5 0

4 0

3 1

2 0

1 1

1 0 FORMAT-ID

Length of frequency list contents 0 0 FORMID W(1) (low part) : 0 F0

W(1) (high part)

1 3

W(2) to W(3) are on 9 bits, when present W(4) to W(7) are on 8 bits, when present W(8) to W(15) are on 7 bits, when present W(16) to W(31) are on 6 bits, when present W(2k) to W(2(k+1)- 1) are on 10-k bits when present

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 56/639

Range

512 format 8 0 7 0

supported 6 0 5 0 4 0 3 1 2 0 1 1 ORIGARFCN 1 3

1 0 FORMAT-ID ORIGARFCN (low) W(1) (low part)

Length of frequency list contents 0 0 1

0 0 FORMAT-ID (continued) ORIG-ARFCN (middle part) W(1) (high part) W(2) (high part)

4 5 6

: W(2) to W(3) are on 8 bits, when present W(4) to W(7) are on 7 bits, when present W(8) to W(15) are on 6 bits, when present W(16) to W(31) are on 5 bits, when present W(2k) to W(2(k+1)- 1) are on 9-k bits when present

Range

256 format 8 0 7 0

supported 6 0 5 0 4 0 3 1 2 0 1 1 ORIGARFCN 1 3

1 0 FORMAT-ID ORIGARFCN (low) W(1) (low)

Length of frequency list contents 0 0 1

0 1 FORMAT-ID (continued) ORIG-ARFCN (middle part) W(1) (high part) W(2) :

4 5 6

W(2) to W(3) are on 7 bits, when present W(4) to W(7) are on 6 bits, when present W(8) to W(15) are on 5 bits, when present W(16) to W(31) are on 4 bits, when present W(2k) to W(2(k+1)- 1) are on 8-k bits when present

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 57/639

Range

128 format 8 0 7 0

supported 6 0 5 0 4 0 3 1 2 0 1 1 ORIGARFCN 1 3

1 0 FORMAT-ID ORIGARFCN (low)

Length of frequency list contents 0 0 1

1 0 FORMAT-ID (continued) ORIG-ARFCN (middle part) W(1)

4 5

: W(2) to W(3) are on 6 bits, when present W(4) to W(7) are on 5 bits, when present W(8) to W(15) are on 4 bits, when present W(16) to W(31) are on 3 bits, when present W(2k) to W(2(k+1)- 1) are on 7-k bits when present Variable bit map format 8 0 7 0 supported 5 4 3 0 0 1 Length of frequency list contents 0 0 1 1 spare spare FORMAT-ID (continued) ORIG-ARFCN (middle part) RRFCN 2 RRFCN 3 RRFCN 4 RRFCN 5 6 0 2 0 1 1 1 ORIGARFCN high RRFCN 7 1 2 3 4 5

1 0 FORMAT-ID ORIGARFC N low RRFC N 8k-40

RRFCN 1

RRFCN 6

RRFCN 8k-39

RRFCN 8k-38

RRFCN 8k-37

RRFCN 8k-36

RRFCN 8k-35

RRFCN 8k-34

RRFCN 8k-33

k indicates the octet number of the I.E. k 131. SUB PARAMETER DEFINITION Bits 5 and 6 are spare bits in octet 3. FORMAT-ID F0 : Frequency 0 indicator. Coded 0 if ARFCN 0 is not a member of the set. Coded 1 if ARFCN 0 is a member of the set. : Format identifier.

ORIG-ARFCN : This field encodes the ARFCN of one frequency belonging to the set. This value is also used as the origin of the bit map to generate all the other frequencies. RRFCN N : Relative Radio Frequency Channel Number N. - For an RF channel with ARFCN = (ORIG-ARFCN + N) mod 1024 belonging to the set, then RRFCN N bit is coded as '1'.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 58/639

For an RF channel with ARFCN = (ORIG-ARFCN + N) mod 1024 not belonging to the set, then RRFCN N bit is coded as '0'.

: Each non null W(k) allows to compute, together with some previous W(i) the ARFCN F(k) of a frequency in the set (see 3GPP TS 44.018 for computation formulas).

PARAMETER ORIGIN - ACTION ON PARAMETER

ORIG-ARFCN, RRFCN N: Values stored in BSC and updated according to system reconfigurations.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 59/639

6.2.6

CELL CHANNEL DESCRIPTION

TYPE: O

DEFINITION

To provide the reference frequency list to be used to decode the mobile allocation information element. BIT DESCRIPTION Bitmap 0 format 8 0 0 7 1 0 6 1 0 5 0 0 4 0 124 3 0 2 1 1 0 121 113 003 002 001 1

FORMAT-ID 120 008 007

CA ARFCN ......................... ........... 006 CA ARFCN 005 004

123

CA ARFCN

122

2 3

17

Bits 5 and 6 are spare bits in octet 2. SUB PARAMETER DEFINITION FORMAT-ID : Format identifier Only bitmap 0 Format is supported.

CA ARFCN N : Cell Allocation Absolute Radio Frequency Channel Number N CA ARFCN N : "0" not belonging to the cell allocation "1" belonging to the cell allocation PARAMETER ORIGIN - ACTION ON PARAMETER Format-ID: Fixed value = 00. CA ARFCN N : Value stored in BSC and updated according to system reconfigurations.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 60/639

6.2.7

Description of the multislot configuration / MULTISLOT ALLOCATION

TYPE: C DEFINITION

To provide a description of which channels are used in downlink and uplink respectively, in a multislot configuration. BIT DESCRIPTION 8 0 7 0 6 0 5 1 0 4 3 0 2 0 1 0 1

Length = 1 DA 5 5 DA 4 4

2 3

1 ext Or 8

DA 7 7

DA 6 6

DA 3 3

DA 2 2

DA 1 1

Length = 2 DA 5 UA 5 DA 4 UA 4

2 3

SUB PARAMETER DEFINITION Octet 3

0 ext 1 ext

DA 7 UA 7

DA 6 UA 6

DA 3 UA 3

DA 2 UA 2

DA 1 UA 1

3a

DA 1-7: Indicates additional downlink channel allocation.If bit DA n is set to "1" this indicates that timeslot TN = (n + TNm)mod8 is assigned. If bit DA n is set to "0" the corresponding timeslot is not assigned. TNm is the timeslot number of the main link. Octet 3a UA 1-7: Indicates additional uplink channel allocation.If bit UA n is set to "1" this indicates that timeslot TN = (n + TNm)mod8 is assigned. If bit UA n is set to "0" the corresponding timeslot is not assigned. TNm is the timeslot number of the main link. Note: If octet 3a is not included the timeslots indicated by octet 3 are allocated in both downlink and uplink direction

PARAMETER ORIGIN - ACTION ON PARAMETER The BSC has to provide the information: DA 1-7. The BSC can provide optionally the information: UA 1-7.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 61/639

6.2.8

TYPE: O

Mode of the First Channel (Channel Set 1) / CHANNEL MODE

DEFINITION

The channel mode information element gives the mode of encoding, decoding and transcoding. BIT DESCRIPTION 8 0 7 1 6 1 5 0 mode 4 0 3 0 2 1 1 1

SUB PARAMETER DEFINITION The mode field is encoded as follows: Bits 87654321 00000000 00000001 00100001 01000001 10000001 10000010 10000011 01100001 01100010 01100100 01100111 01100101 01100110 00100111 01100011 01000011 00001111 00000011 00001011 00010011 signaling only speech (full rate or half rate version 1) speech (full rate or half rate version 2) speech (full rate or half rate version 3) speech (full rate or half rate version 4) speech (full rate or half rate version 5) speech (full rate or half rate version 6) data, 43.5 kbit/s (downlink)+14.5 kbps (uplink) data, 29.0 kbit/s (downlink)+14.5 kbps (uplink) data, 43.5 kbit/s (downlink)+29.0 kbps (uplink) data, 14.5 kbit/s (downlink)+43.5 kbps (uplink) data, 14.5 kbit/s (downlink)+29.0 kbps (uplink) data, 29.0 kbit/s (downlink)+43.5 kbps (uplink) data, 43.5 kbit/s radio interface rate data, 32.0 kbit/s radio interface rate data, 29.0 kbit/s radio interface rate data, 14.5 kbit/s radio interface rate data, 12 kbit/s radio interface rate data, 6 kbit/s radio interface rate data, 3.6 kbit/s radio interface rate All other values are reserved and not supported.

not supported not supported not supported not supported not supported not supported not supported not supported not supported not supported not supported not supported

PARAMETER ORIGIN - ACTION ON PARAMETER

Data rates received on the A interface which are lower than 2.4 kbit/s are mapped onto the "data 3.6 kbit/s radio interface rate" value in this element.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 62/639

6.2.9

TYPE C

MOBILE ALLOCATION, after time / MOBILE ALLOCATION

DEFINITION

To provide the part of the RF channels belonging to the cell allocation which is used in the Mobile Station hopping sequence (primary band in GSM900). BIT DESCRIPTION 8 0 MA C 8n : 7 1 MA C 8n-1 6 1 5 1 4 0 3 0 2 1 1 0 MA C 8n-7 : MA C 001

length of Mobile allocation contents (value 8 )

MA C 008 SUB PARAMETER DEFINITION

MA length depends on the relative frequency span of the frequencies in the cell allocation frequency list MA Ci: Mobile Allocation RF Channel i - the RF channels represented in the MA C i bit fields are those which in the "Cell Channel Description" information element are coded with "1" in the CA ARFCN N bit fields. MA Ci = CA ARFCN N(i) i = 1,2...NF

(NF = Number of Frequencies in the CA frequency list). For a RF channel belonging to the Mobile Allocation the MA C i bit is coded with a "1", for a RF channel not belonging to the Mobile Allocation, the MA C i bit is coded with a "0". If NF mod 8 0 then bits NF to 8n in octet 3 must be coded with a "0" in each. PARAMETER ORIGIN - ACTION ON PARAMETER

The parameter is transparent for the BTS when received from the BSC. At the BSC site the following actions have to be performed Mobile Allocation Stored and Updated during system reconfiguration.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 63/639

6.2.10 VGCS TARGET MODE INDICATION TYPE: O

DEFINITION This IE indicates which mode is to be used on the new channel (i.e. dedicated mode or group transmit mode). If this information element is not present, the mode shall be the same as on the previous channel. The VGCS target mode Indication OIE in the ASSIGNMENT COMMAND message sent for the (first or subsequent) talker, is always valued as group transmit mode. The IE also indicates the group cipher key number for the group cipher key to be used on the new channel or if the new channel is non ciphered. If the information element is not present, the ciphering mode shall be the same as on the previous channel. BIT DESCRIPTION 8 7 5 4 3 VGCS target mode Indic. IEI Length of VGCS target mode Indic. Group cipher key number 6 2 1 spare 1 1 spare octet 1 octet 2 octet 3

Target mode

SUB PARAMETER DEFINITION Target mode Bit 87 00 dedicated mode (not used) 01 group transmit mode Other values are reserved for future use. Group cipher key number Bit 6543 0000 0001 0010 0011 0100 0101 0110 0111 1000 1001 1010 1011 1100 1101 1110 1111

no ciphering cipher key number 1 cipher key number 2 cipher key number 3 cipher key number 4 cipher key number 5 cipher key number 6 cipher key number 7 cipher key number 8 cipher key number 9 cipher key number A cipher key number B cipher key number C cipher key number D cipher key number E cipher key number F

(not used) (not used) (not used) (not used) (not used) (not used) (not used) (not used) (not used) (not used) (not used) (not used) (not used) (not used) (not used)

PARAMETER ORIGIN - ACTION ON PARAMETER ED EVOLIUM 05 RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 64/639

6.2.11 MULTIRATE CONFIGURATION TYPE: O

DEFINITION : The MultiRate configuration information element gives all parameters related to a MultiRate speech codec. BIT DESCRIPTION 8 7 0 0 6 0 5 0 4 0 3 0 2 1 1 1

Length

octet 1 octet 2

Multirate speech version

NSCB

ICMI

spare

Start mode

octet 3 octet 4 . . octet n (n 8)

Parameters for MultiRate speech

SUB PARAMETER DEFINITION Octet 3 MultiRate speech version: Bits 8 7 6 0 0 1 Adaptive MultiRate speech version 1 0 1 0 Adaptive MultiRate speech version 2 all other values are reserved. Note: The Adaptive Multirate speech versions are also referred as follows (see 3GPP TS 26.103): - Adaptive Multirate speech version 1: FR AMR, HR AMR or OHR AMR; - Adaptive Multirate speech version 2: FR AMR-WB, OFR AMR-WB or OHR AMR-WB; Only FR AMR, HR AMR and FR AMR-WB are supported. NSCB (Noise Suppression Control Bit): Bit 5 0 Noise Suppression can be used (default) 1 Noise Suppression shall be turned off ICMI (Initial Codec Mode Indicator): Bit 4 0 The initial codec mode is defined by the implicit rule provided in 3GPP TS 45.009 1 The initial codec mode is defined by the Start Mode field Note: For FR AMR-WB, ICMI is always set to 0. Bit 3 0 Spare

Start Mode: Bits 21 xx

The initial codec mode is coded as in 3GPP TS 45.009 section 3.4.1 LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 65/639

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

Parameters for MultiRate speech (octet 4 to octet n, n 8):

1) Parameters for MultiRate speech field for the Multirate speech version 1 when a set with one codec mode is chosen 8 7 6 5 4 3 2 1 octet 4

Set of AMR codec modes

2) Parameters for MultiRate speech field for the Multirate speech version 1 when a set with two codec modes is chosen 8 Spare 7 6 5 4 3 2 1 octet 4 Spare octet 5 0 0 octet 6

Set of AMR codec modes 0 Hysteresis 1 Threshold 1 0 0

3) Parameters for MultiRate speech field for the Multirate speech version 1 & 2 when a set of three codec modes is chosen 8 Spare 7 6 5 4 3 2 1 octet 4 octet 5 Spare octet 6 0 octet 7

Set of AMR codec modes 0 Threshold 1 Threshold 2 Hysteresis 2 0

Hysteresis 1 Threshold 2 (cont.)

4) Parameters for MultiRate speech field for the Multirate speech version 1 when a set of four modes is chosen 8 Spare 7 6 5 4 3 2 1 octet 4 octet 5 octet 6 octet 7 octet 8

Set of AMR codec modes 0 Threshold 1 Threshold 2 Threshold 3 Hysteresis 3

Hysteresis 1 Threshold 2 (cont.) Threshold (3)

Hysteresis 2

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 66/639

Set of adaptive MultiRate codec modes field for Multirate speech version 1 (octet 4) Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 0 0 0 1 0 1 0 12,2 kbit/s codec rate is not part of the subset; 12,2 kbit/s codec rate is part of the subset; 10,2 kbit/s codec rate is not part of the subset; 10,2 kbit/s codec rate is part of the subset; 7,95 kbit/s codec rate is not part of the subset; 7,95 kbit/s codec rate is part of the subset; 7,40 kbit/s codec rate is not part of the subset; 7,40 kbit/s codec rate is part of the subset; 6,70 kbit/s codec rate is not part of the subset; 6,70 kbit/s codec rate is part of the subset; 5,90 kbit/s codec rate is not part of the subset; 5,90 kbit/s codec rate is part of the subset; 5,15 kbit/s codec rate is not part of the subset; 5,15 kbit/s codec rate is part of the subset; 4,75 kbit/s codec rate is not part of the subset; 4,75 kbit/s codec rate is part of the subset;

Set of adaptive MultiRate codec modes field for Multirate speech version 2 (octet 4) Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 spare spare spare 23.85 kbit/s codec rate is not part of the subset; 23.85 kbit/s codec rate is part of the subset (not supported); 15.85 kbit/s codec rate is not part of the subset; 15.85 kbit/s codec rate is part of the subset (not supported); 12.65 kbit/s codec rate is not part of the subset (not supported); 12.65 kbit/s codec rate is part of the subset; 8.85 kbit/s codec rate is not part of the subset (not supported); 8.85 kbit/s codec rate is part of the subset; 6.60 kbit/s codec rate is not part of the subset (not supported); 6.60 kbit/s codec rate is part of the subset;

1 0 1 0 1

Threshold j (6 bits), see Note 1

Hysteresis j (4 bits), see Note 1

Coded as the binary representation of a value N. N corresponds to the threshold of C/I in dB, as defined in 3GPP TS 45.009; Coded as the binary representation of the hysteresis value associated to THRj, as defined in 3GPP TS 45.009.

Note 1: j = 1 corresponds to the lowest value of threshold in dB, j = 2 to the second lowest, j = 3 to the highest value.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 67/639

6.3

NAME

ASSIGNMENT COMPLETE
RADIO SDCCH/FACCH 44.018

ASSIGNMENT COMPLETE ABIS BTS Transparent A SCCP connection 08.08

INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION

This message is sent in the main DCCH from the Mobile Station to the network to indicate that the Mobile Station has established the main signalling link successfully. From: MS INFORMATION ELEMENT NAME To: BSC TYPE COMMENT LENGTH (byte) 2 1 3 TIMER

DIRECTION

INFORMATION ELEMENT LIST

Header RR Cause

M V IMPLEMENTATION MAXIMUM LENGTH

NORMAL SITUATION FOLLOWING EVENT Procedure to be continued on allocated channel Normal assignment procedure Internal handover

ABNORMAL SITUATION

T3107 (ref. [3]) (ref. [6])

SPECIF DOC. REF.

T3107 is stopped when the message is received.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE ASSIGNMENT COMPLETE 3BK 11203 0138 DSZZA 68/639

6.3.1

GENERAL DESCRIPTION 8 0 RR Cause 0 7 0 0 6 0 1 5 0 0 4 0 1 3 1 0 2 1 0 1 0 1

RR CAUSE VALUE

6.3.2

TYPE: M

RR CAUSE

DEFINITION To provide the reason for completion of an assignment. BIT DESCRIPTION 8 7 6 5 4 3 2 1

RR CAUSE VALUE

SUB PARAMETER DEFINITION The RR cause used: Bits 8 7 6 5 4 3 2 1 00000000 Normal event.

PARAMETER ORIGIN - ACTION ON PARAMETER This parameter is transparent for the BTS (because the message itself is transparent). The BSC does not check the value given by the MS. The BSC gives this information to the MSC in the message over the A Interface.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE ASSIGNMENT COMPLETE 3BK 11203 0138 DSZZA 69/639

6.4

NAME

ASSIGNMENT FAILURE
RADIO SDCCH/FACCH 44.018

ASSIGNMENT FAILURE ABIS BTS Transparent 08.08 A

INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION

This message is sent on the main DCCH on the old channel from Mobile Station to the BSC to indicate that the MS has failed to seize the new channel. Used by BSC to report channel seizure failure to the MSC. From: MS INFORMATION ELEMENT NAME To: BSC TYPE COMMENT LENGTH (byte) 2 1 3 TIMER

DIRECTION

INFORMATION ELEMENT LIST

Header RR Cause

M V IMPLEMENTATION MAXIMUM LENGTH

NORMAL SITUATION FOLLOWING EVENT MSC decides to cancel the procedure or to reallocate a new channel Normal assignment procedure Internal handover

ABNORMAL SITUATION

T 3107 (ref. [3]) (ref. [6])

SPECIF DOC. REF.

T3107 is stopped on reception of this message.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE ASSIGNMENT FAILURE 3BK 11203 0138 DSZZA 70/639

6.4.1

GENERAL DESCRIPTION 8 0 RR Cause 0 7 0 0 6 0 1 5 0 0 4 0 1 3 1 1 2 1 1 1 0 1

RR CAUSE VALUE

6.4.2 RR CAUSE TYPE: M DEFINITION To provide the reason for the assignment failure. BIT DESCRIPTION 8 7 6 5 4 3 2 1

RR Cause

SUB PARAMETER DEFINITION

PARAMETER ORIGIN - ACTION ON PARAMETER This parameter is transparent for the BTS. The parameter is transparent to the BSC, it is forwarded to the MSC in the ASSIGNMENT-FAILURE (A interface) message.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE ASSIGNMENT FAILURE 3BK 11203 0138 DSZZA 71/639

6.5

NAME

CHANNEL MODE MODIFY


RADIO FACCH 44.018

CHANNEL MODE MODIFY ABIS BTS Transparent A

INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION

This message is sent on the FACCH from the BSC to the Mobile Station to change the channel mode, for in-call modification. See Note 3 From BSC INFORMATION ELEMENT NAME To MS TYPE COMMENT LENGTH (byte) 2 3 1 3 4-8 3-15 6 TIMER Start T9112

DIRECTION

INFORMATION ELEMENT LIST

Header M V Channel Description M V (Note 1) Channel Mode M V VGCS target mode Indication O TLV Not used MultiRate configuration O TLV (Note 2) VGCS Ciphering Parameters O TLV Not used IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION ABNORMAL SITUATION T9112 expiry, CHANNEL MODE MODIFY ACK (old mode) (ref. [8])

FOLLOWING EVENT

CHANNEL MODE MODIFY ACK (new mode)

SPECIF DOC. REF.

Channel modification

Note 1: TCH/H + TCH/H configuration is not supported for this release. Note 2: Note 3 : This message is not used in VGCS context .

This field is only included for calls established with AMR codec.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL MODE MODIFY 3BK 11203 0138 DSZZA 72/639

6.5.1

GENERAL DESCRIPTION

8 0 0

7 0 0

6 0 0

5 0 1

4 0 0

3 1 0

2 1 0

Channel type and TDMA offset Channel Description TSC MAIO low part H=1-> H=0->

MAIO (high part) HSN spare ARFCN (Hpart)

TN

A R F C N (low part) Channel Mode 0 0 NSCB 0 ICMI

Channel Mode MultiRate configuration (Note) 0 0

0 spare

Length (value 6 ) Multirate speech version Parameters for MultiRate speech (1-5 octets) Start mode

Note:

This field is only included for calls established with AMR codec.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL MODE MODIFY 3BK 11203 0138 DSZZA 73/639

6.5.2 CHANNEL DESCRIPTION - Phase 1 TYPE: M DEFINITION To provide a description of an allocatable channel together with its SACCH. BIT DESCRIPTION 8 7 6 5 4 3 2 TN 1 1 3

Channel type and TDMA offset TSC MAIO low part SUB PARAMETER DEFINITION Octet 1: H=1-> H=0->

MAIO (high part) spare ARFCN (Hpart) HSN A R F C N (low part)

Channel type and TDMA offset: Bits 8 7 6 5 4 0 0 0 0 1 TCH/F + ACCHs 0 0 0 1 T TCH/H + ACCHs 0 0 1 T T SDCCH/4 + SACCH/C4 or CBCH (SDCCH/4) 0 1 T T T SDCCH/8 + SACCH/C8 or CBCH (SDCCH/8) all other values are reserved T bit indicates the subchannel number. TN : Time slot (0 to 7) Octets 2 and 3: TSC : Training Sequence Code (0 to 7) H : "0" Single RF channel "1" RF hopping channel

Channel selector: H = "0": The channel selector field consists of the absolute RF channel number. Bits 4 3 0 0 spare ARFCN: Octet 2 Bits 2,1 High part of ARFCN Octet 3 Bits 8 to 1 ARFCN low part The ARFCN is coded as the binary representation of the absolute RF channel Number. Range: 0 to 1023. LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL MODE MODIFY 3BK 11203 0138 DSZZA 74/639

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

H = "1":

The channel selector field consists of the mobile allocation index offset, MAIO, and the hopping sequence number, HSN. Bits 4 to 1 Bits 8 to 7 high part low part

MAIO: Octet 2 Octet 3

HSN (Octet 3, Bits 1 to 6): Value 0 to 63. The HSN field is coded as the binary representation of the hopping sequence number. PARAMETER ORIGIN - ACTION ON PARAMETER This parameter is transparent for the BTS when received. At the BSC site, the BSC has to provide the following information: Channel type and TDMA offset and TN depends of the resource to be allocated by the resource manager. H: fixed value according if hopping is used or not (this information has to be provided by O&M). Channel selector.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL MODE MODIFY 3BK 11203 0138 DSZZA 75/639

6.5.3 Channel Description / CHANNEL DESCRIPTION 2 - Phase2 TYPE: M DEFINITION To provide a description of an allocatable channel together with its SACCH. BIT DESCRIPTION 8 Channel type and TDMA offset TSC H=1-> H=0-> 7 6 5 4 3 TN 2 1 1 3

MAIO low part SUB PARAMETER DEFINITION Octet 1:

MAIO (high part) spare ARFCN (Hpart) HSN A R F C N (low part)

Channel type and TDMA offset: Bits 8 7 6 5 4 00000 TCH/F + FACCH/F and SACCH/M at the timeslot indicated by TN, and additional bidirectional or undirectional TCH/Fs and SACCH/Ms according to the multislot allocation information element 0 0 0 0 1 TCH/F + FACCH/F and SACCH/F ACCHs 0 0 0 1 T TCH/H + ACCHs 0 0 1 T T SDCCH/4 + SACCH/C4 or CBCH (SDCCH/4) 0 1 T T T SDCCH/8 + SACCH/C8 or CBCH (SDCCH/8) In the description below "n" is the timeslot number indicated by TN. The description is valid only if all the indicated timeslot numbers are in the range 0 to 7. TCH/F + FACCH/F and SACCH/M at the time slot indicated by TN, and 10XXX additional bidirectional TCH/Fs and SACCH/Ms at other timeslots according to the following: X X X: 0 0 0 no additional timeslot 0 0 1 at timeslot n-1 0 1 0 at timeslot n+1, n-1 0 1 1 at timeslot n+1, n-1 and n-2 1 0 0 at timeslot n+1, n-1, n-2, and n-3 1 0 1 at timeslot n+1, n-1, n-2, n-3 and n-4 1 1 0 at timeslot n+1, n-1, n-2, n-3, n-4 and n-5 1 1 1 at timeslot n+1, n-1, n-2, n-3, n-4, n-5 and n-6 11001 TCH/F + FACCH/F and SACCH/M at the time slot indicated by TN and additiona to unidirectional TCH/FDs and SACCH/MDs at other timeslots according to the 11011 following: 11001 at timeslot n-1 11010 at timeslot n+1, n-1 11011 at timeslot n+1, n-1 and n-2 TCH/F + FACCH/F and SACCH/M at the time slot indicated by TN and 11110 additional bidirectional TCH/F and SACCH/M at timeslot n+1 and unidirectional TCH/FD and SACCH/MD at timeslot n-1 All other values are reserved LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL MODE MODIFY 3BK 11203 0138 DSZZA 76/639

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

T bit indicates the subchannel number. TN : Time slot (0 to 7) Octets 2 and 3: TSC : Training Sequence Code (0 to 7) H : "0" Single RF channel "1" RF hopping channel

Channel selector: H = "0": The channel selector field consists of the absolute RF channel number. Bits 4 3 0 0 spare ARFCN: Octet 2 Bits 2,1 High part of ARFCN Octet 3 Bits 8 to 1 ARFCN low part The ARFCN is coded as the binary representation of the absolute RF channel Number. Range: 0 to 1023. H = "1": The channel selector field consists of the mobile allocation index offset, MAIO, and the hopping sequence number, HSN. Bits 4 to 1 Bits 8 to 7 high part low part

MAIO: Octet 2 Octet 3

HSN (Octet 3, Bits 1 to 6): Value 0 to 63. The HSN field is coded as the binary representation of the hopping sequence number. PARAMETER ORIGIN - ACTION ON PARAMETER This parameter is transparent for the BTS when received. At the BSC site, the BSC has to provide the following information: Channel type and TDMA offset and TN depends of the resource to be allocated by the resource manager. H: fixed value according if hopping is used or not (this information has to be provided by O&M). Channel selector.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL MODE MODIFY 3BK 11203 0138 DSZZA 77/639

6.5.4 CHANNEL MODE TYPE M DEFINITION : The channel mode information element gives the mode of encoding, decoding and transcoding. BIT DESCRIPTION 8 7 6 5 mode 4 3 2 1

SUB PARAMETER DEFINITION The mode field is encoded as follows: Bits 87654321 0 0 0 0 0 0 0 0 signaling only 0 0 0 0 0 0 0 1 speech full (rate or half rate version 1) 0 0 1 0 0 0 0 1 speech (full rate or half rate version 2) 0 1 0 0 0 0 0 1 speech (full rate or half rate version 3) 1 0 0 0 0 0 0 1 speech (full rate or half rate version 4) 1 0 0 0 0 0 1 0 speech (full rate or half rate version 5) 1 0 0 0 0 0 1 1 speech (full rate or half rate version 6) 0 1 1 0 0 0 0 1 data, 43.5 kbit/s (downlink)+14.5 kbps (uplink) 0 1 1 0 0 0 1 0 data, 29.0 kbit/s (downlink)+14.5 kbps (uplink) 0 1 1 0 0 1 0 0 data, 43.5 kbit/s (downlink)+29.0 kbps (uplink) 0 1 1 0 0 1 1 1 data, 14.5 kbit/s (downlink)+43.5 kbps (uplink) 0 1 1 0 0 1 0 1 data, 14.5 kbit/s (downlink)+29.0 kbps (uplink) 0 1 1 0 0 1 1 0 data, 29.0 kbit/s (downlink)+43.5 kbps (uplink) 0 0 1 0 0 1 1 1 data, 43.5 kbit/s radio interface rate 0 1 1 0 0 0 1 1 data, 32.0 kbit/s radio interface rate 0 1 0 0 0 0 1 1 data, 29.0 kbit/s radio interface rate 0 0 0 0 1 1 1 1 data 14.5 kbit/s radio interface rate 0 0 0 0 0 0 1 1 data 12 kbit/s radio interface rate 0 0 0 0 1 0 1 1 data 6 kbit/s radio interface rate 0 0 0 1 0 0 1 1 data 3.6 kbit/s radio interface rate All other values are reserved and not supported. PARAMETER ORIGIN - ACTION ON PARAMETER This parameter is deduced from the A interface Channel Type IE. Data rates received on the A interface which are lower than 2.4 kbit/s are mapped onto the "data 3.6 kbit/s radio interface rate" value in this element.

not supported not supported not supported not supported not supported not supported not supported not supported not supported not supported not supported not supported

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL MODE MODIFY 3BK 11203 0138 DSZZA 78/639

6.5.5 MULTIRATE CONFIGURATION TYPE: O DEFINITION : The MultiRate Configuration information element gives all parameters related to a MultiRate speech codec. BIT DESCRIPTION 8 0 7 0 6 0 5 0 4 0 3 0 2 1 1 1 octet 1 octet 2 spare Start mode octet 3 octet 4 . . octet n (n 8) SUB PARAMETER DEFINITION Octet 3 MultiRate speech version: Bits 8 7 6 0 0 1 Adaptive MultiRate speech version 1 0 1 0 Adaptive MultiRate speech version 2 all other values are reserved. Note: The Adaptive Multirate speech versions are also referred as follows (see 3GPP TS 26.103): - Adaptive Multirate speech version 1: FR AMR, HR AMR or OHR AMR; - Adaptive Multirate speech version 2: FR AMR-WB, OFR AMR-WB or OHR AMR-WB; Only FR AMR, HR AMR and FR AMR-WB are supported. NSCB (Noise Suppression Control Bit): Bit 5 0 Noise Suppression can be used (default) 1 Noise Suppression shall be turned off ICMI (Initial Codec Mode Indicator): Bit 4 0 The initial codec mode is defined by the implicit rule provided in 3GPP TS 45.009 1 The initial codec mode is defined by the Start Mode field Bit 3 0 Spare

Length

Multirate speech version

NSCB

ICMI

Parameters for MultiRate speech

Start Mode: Bits 21 xx

The initial codec mode is coded as in 3GPP TS 45.009 section 3.4.1

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL MODE MODIFY 3BK 11203 0138 DSZZA 79/639

Parameters for MultiRate speech (octet 4 to octet n, n 8):

1) Parameters for MultiRate speech field for the Multirate speech version 1 when a set with one codec mode is chosen 8 7 6 5 4 3 2 1 octet 4

Set of AMR codec modes

2) Parameters for MultiRate speech field for the Multirate speech version 1 when a set with two codec modes is chosen 8 Spare 7 6 5 4 3 2 1 octet 4 Spare octet 5 0 0 octet 6

Set of AMR codec modes 0 Hysteresis 1 Threshold 1 0 0

3) Parameters for MultiRate speech field for the Multirate speech version 1 & 2 when a set of three codec modes is chosen 8 Spare 7 6 5 4 3 2 1 octet 4 octet 5 Spare octet 6 0 octet 7

Set of AMR codec modes 0 Threshold 1 Threshold 2 Hysteresis 2 0

Hysteresis 1 Threshold 2 (cont.)

4) Parameters for MultiRate speech field for the Multirate speech version 1 when a set of four modes is chosen 8 Spare 7 6 5 4 3 2 1 octet 4 octet 5 octet 6 octet 7 octet 8

Set of AMR codec modes 0 Threshold 1 Threshold 2 Threshold 3 Hysteresis 3

Hysteresis 1 Threshold 2 (cont.) Threshold (3)

Hysteresis 2

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL MODE MODIFY 3BK 11203 0138 DSZZA 80/639

Set of adaptive MultiRate codec modes field for Multirate speech version 1 (octet 4) Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 12,2 kbit/s codec rate is not part of the subset; 12,2 kbit/s codec rate is part of the subset; 10,2 kbit/s codec rate is not part of the subset; 10,2 kbit/s codec rate is part of the subset; 7,95 kbit/s codec rate is not part of the subset; 7,95 kbit/s codec rate is part of the subset; 7,40 kbit/s codec rate is not part of the subset; 7,40 kbit/s codec rate is part of the subset; 6,70 kbit/s codec rate is not part of the subset; 6,70 kbit/s codec rate is part of the subset; 5,90 kbit/s codec rate is not part of the subset; 5,90 kbit/s codec rate is part of the subset; 5,15 kbit/s codec rate is not part of the subset; 5,15 kbit/s codec rate is part of the subset; 4,75 kbit/s codec rate is not part of the subset; 4,75 kbit/s codec rate is part of the subset;

Set of adaptive MultiRate codec modes field for Multirate speech version 2 (octet 4) Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 0 0 0 0 1 0 1 0 spare spare spare 23.85 kbit/s codec rate is not part of the subset; 23.85 kbit/s codec rate is part of the subset (not supported); 15.85 kbit/s codec rate is not part of the subset; 15.85 kbit/s codec rate is part of the subset (not supported); 12.65 kbit/s codec rate is not part of the subset (not supported); 12.65 kbit/s codec rate is part of the subset; 8.85 kbit/s codec rate is not part of the subset (not supported); 8.85 kbit/s codec rate is part of the subset; 6.60 kbit/s codec rate is not part of the subset (not supported); 6.60 kbit/s codec rate is part of the subset;

1 0 1 0 1

Threshold j (6 bits), see Note 1

Hysteresis j (4 bits), see Note 1

Coded as the binary representation of a value N. N corresponds to the threshold of C/I in dB, as defined in 3GPP TS 45.009; Coded as the binary representation of the hysteresis value associated to THRj, as defined in 3GPP TS 45.009.

Note 1: j = 1 corresponds to the lowest value of threshold in dB, j = 2 to the second lowest, j = 3 to the highest value.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL MODE MODIFY 3BK 11203 0138 DSZZA 81/639

6.6

CHANNEL MODE MODIFY ACK


NAME CHANNEL MODE MODIFY ACK RADIO FACCH 44.018 This message is sent on the FACCH from the Mobile Station to the BSC to acknowledge the requested change of mode, for in-call modification. To indicate successful change of mode or that the old mode is valid. From MS INFORMATION ELEMENT NAME To BSC TYPE M V M V M V COMMENT LENGTH (byte) 2 3 1 6 TIMER Stop T9112 Channel modification (ref. [8]) ABIS BTS Transparent A

INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION

DIRECTION

INFORMATION ELEMENT LIST

Header Channel Description Channel Mode

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT ABNORMAL SITUATION

SPECIF DOC. REF.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL MODE MODIFY ACK 3BK 11203 0138 DSZZA 82/639

6.6.1

GENERAL DESCRIPTION

8 0 0

7 0 0

6 0 0

5 0 1 H=1->

4 0 0

3 1 1

2 1 1 TN

0 1

Channel type and TDMA offset Channel Description TSC MAIO low part H=0->

MAIO (high part) HSN spare ARFCN (Hpart)

A R F C N (low part) Channel Mode

Channel Mode

6.6.2 CHANNEL DESCRIPTION - Phase 1 TYPE: M DEFINITION To provide a description of an allocatable channel together with its SACCH. BIT DESCRIPTION 8 Channel type and TDMA offset TSC H=1-> H=0-> 7 6 5 4 3 TN 2 1 1

MAIO low part

MAIO (high part) spare ARFCN (Hpart) HSN A R F C N (low part)

2 3

SUB PARAMETER DEFINITION Octet 1: Bits Channel type and TDMA offset: 8 7 6 5 4 0 0 0 0 1 TCH/F + ACCHs 0 0 0 1 T TCH/H + ACCHs 0 0 1 T T SDCCH/4 + SACCH/C4 or CBCH (SDCCH/4) 0 1 T T T SDCCH/8 + SACCH/C8 or CBCH (SDCCH/8) all other values are reserved. T bit indicates the subchannel number. TN : Time slot (0 to 7) LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL MODE MODIFY ACK 3BK 11203 0138 DSZZA 83/639

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

Octets 2 and 3: TSC : Training Sequence Code (0 to 7) H : "0" Single RF channel "1" RF hopping channel

Channel selector: H = "0": The channel selector field consists of the absolute RF channel number. Bits 4 3 0 0 spare ARFCN: Octet 2 Octet 3 Bits 2,1 Bits 8 to 1 High part of ARFCN ARFCN low part

The ARFCN is coded as the binary representation of the absolute RF channel Number. Range: 0 to 1023. H = "1": The channel selector field consists of the mobile allocation index offset, MAIO, and the hopping sequence number, HSN. Bits 4 to 1 Bits 8 to 7 high part low part

MAIO: Octet 2 Octet 3

HSN (Octet 3, Bits 1 to 6): Value 0 to 63. The HSN field is coded as the binary representation of the hopping sequence number. PARAMETER ORIGIN - ACTION ON PARAMETER This parameter is transparent for the BTS when received.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL MODE MODIFY ACK 3BK 11203 0138 DSZZA 84/639

6.6.3 CHANNEL DESCRIPTION 2 - Phase2 TYPE: M DEFINITION To provide a description of an allocatable channel together with its SACCH. BIT DESCRIPTION 8 Channel type and TDMA offset TSC H=1-> H=0-> 7 6 5 4 3 TN 2 1 1 3

MAIO low part SUB PARAMETER DEFINITION Octet 1:

MAIO (high part) spare ARFCN (Hpart) HSN A R F C N (low part)

Channel type and TDMA offset: Bits 8 7 6 5 4 00000 TCH/F + FACCH/F and SACCH/M at the timeslot indicated by TN, and additional bidirectional or undirectional TCH/Fs and SACCH/Ms according to the multislot allocation information element 0 0 0 0 1 TCH/F + FACCH/F and SACCH/F ACCHs 0 0 0 1 T TCH/H + ACCHs 0 0 1 T T SDCCH/4 + SACCH/C4 or CBCH (SDCCH/4) 0 1 T T T SDCCH/8 + SACCH/C8 or CBCH (SDCCH/8) In the description below "n" is the timeslot number indicated by TN. The description is valid only if all the indicated timeslot numbers are in the range 0 to 7. TCH/F + FACCH/F and SACCH/M at the time slot indicated by TN, and 10XXX additional bidirectional TCH/Fs and SACCH/Ms at other timeslots according to the following: X X X: 0 0 0 no additional timeslots 0 0 1 at timeslot n-1 0 1 0 at timeslot n+1, n-1 0 1 1 at timeslot n+1, n-1 and n-2 1 0 0 at timeslot n+1, n-1, n-2, and n-3 1 0 1 at timeslot n+1, n-1, n-2, n-3 and n-4 1 1 0 at timeslot n+1, n-1, n-2, n-3, n-4 and n-5 1 1 1 at timeslot n+1, n-1, n-2, n-3, n-4, n-5 and n-6 11001 TCH/F + FACCH/F and SACCH/M at the time slot indicated by TN and to additional unidirectional TCH/FDs and SACCH/MDs at other timeslots 11011 according to the following: 11001 at timeslot n-1 11010 at timeslot n+1, n-1 11011 at timeslot n+1, n-1 and n-2 11110 TCH/F + FACCH/F and SACCH/M at the time slot indicated by TN and additional bidirectional TCH/F and SACCH/M at timeslot n+1 and unidirectional TCH/FD and SACCH/MD at timeslot n-1 All other values are reserved LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL MODE MODIFY ACK 3BK 11203 0138 DSZZA 85/639

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

T bit indicates the subchannel number. TN : Time slot (0 to 7) Octets 2 and 3: TSC : Training Sequence Code (0 to 7) H : "0" Single RF channel "1" RF hopping channel

Channel selector: H = "0": The channel selector field consists of the absolute RF channel number. Bits 4 3 0 0 spare ARFCN: Octet 2 Bits 2,1 High part of ARFCN Octet 3 Bits 8 to 1 ARFCN low part The ARFCN is coded as the binary representation of the absolute RF channel Number. Range: 0 to 1023. H = "1": The channel selector field consists of the mobile allocation index offset, MAIO, and the hopping sequence number, HSN. Bits 4 to 1 Bits 8 to 7 high part low part

MAIO: Octet 2 Octet 3

HSN (Octet 3, Bits 1 to 6): Value 0 to 63. The HSN field is coded as the binary representation of the hopping sequence number. PARAMETER ORIGIN - ACTION ON PARAMETER This parameter is transparent for the BTS when received. At the BSC site, the BSC has to provide the following information: Channel type and TDMA offset and TN depends of the resource to be allocated by the resource manager. H: fixed value according if hopping is used or not (this information has to be provided by O&M). Channel selector.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL MODE MODIFY ACK 3BK 11203 0138 DSZZA 86/639

6.6.4 CHANNEL MODE TYPE: M DEFINITION The channel mode information element gives the mode of encoding, decoding and transcoding. BIT DESCRIPTION 8 7 6 5 mode 4 3 2 1

SUB PARAMETER DEFINITION The mode field is encoded as follows: Bits 87654321 00000000 00000001 00100001 01000001 10000001 10000010 10000011 01100001 01100010 01100100 01100111 01100101 01100110 00100111 01100011 01000011 00001111 00000011 00001011 00010011 signalling only speech (full rate or half rate version 1) speech (full rate or half rate version 2) speech (full rate or half rate version 3) speech (full rate or half rate version 4) speech (full rate or half rate version 5) speech (full rate or half rate version 6) data, 43.5 kbit/s (downlink)+14.5 kbps (uplink) data, 29.0 kbit/s (downlink)+14.5 kbps (uplink) data, 43.5 kbit/s (downlink)+29.0 kbps (uplink) data, 14.5 kbit/s (downlink)+43.5 kbps (uplink) data, 14.5 kbit/s (downlink)+29.0 kbps (uplink) data, 29.0 kbit/s (downlink)+43.5 kbps (uplink) data, 43.5 kbit/s radio interface rate data, 32.0 kbit/s radio interface rate data, 29.0 kbit/s radio interface rate data 14.5 kbit/s radio interface rate data 12 kbit/s radio interface rate data 6 kbit/s radio interface rate data 3.6 kbit/s radio interface rate All other values are reserved and not supported.

not supported not supported not supported not supported not supported not supported not supported not supported not supported not supported not supported not supported

PARAMETER ORIGIN - ACTION ON PARAMETER The MS sets this parameter according to the applied new rate or according to the old one.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL MODE MODIFY ACK 3BK 11203 0138 DSZZA 87/639

6.7

NAME

CHANNEL RELEASE
RADIO SDCCH/FACCH 44.018

CHANNEL RELEASE ABIS BTS Transparent A

INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION

This message is sent on the main DCCH from the BSC to the Mobile Station to initiate deactivation of the dedicated channel used. From: BSC INFORMATION ELEMENT NAME To: MS TYPE COMMENT LENGTH (byte) 2 1 6-37 5-13 1 1 3-? 3-? 17 5-10 1 3-15 13 81 TIMER T3109

INFORMATION ELEMENT LIST

Header RR Cause M V BA Range O TLV Group Channel Description O TLV Group Cipher Key Number C TV GPRS Resumption O TV BA List Pref O TLV UTRAN Freq List O TLV Cell Channel Description O TV Cell selection indicator after release O TLV of all TCH and SDCCH Enhanced DTM CS Release O TV Indication VGCS Ciphering Parameters O TLV Group Channel Description 2 O TLV IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION

(1) (3) Not used (2) Not used Not used (3) Not used Not used Not used

ABNORMAL SITUATION

FOLLOWING EVENT

The Mobile station releases the Local resource release if MS radio link layer does not release the link layer. Call release (ref. [5])

SPECIF DOC. REF.

(1) Sent to phase 2 MS, only during location updating procedure. (2) Only sent to the MS which supports the GPRS services. (3) There is only one Use Case in which the BTS sends Channel Release message with Group Channel Description OIE and Cell Channel Description OIE: If a MS VGCS originator/talker performs an intercell handover towards a non hopping channel, and if in the target cell the corresponding group call channel is a hopping one. When the talker stops talking, if the BTS sends Channel Release message with Group Channel Description OIE but without Cell Channel Description OIE, the former talker cannot understand this message. See reason for change of 3GPP CR 44.018/301r2. LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE ED 05 RELEASED CHANNEL RELEASE EVOLIUM
0138_05.doc 15/02/2008

3BK 11203 0138 DSZZA

88/639

In case of Notification Response procedure, the BTS sends Channel Release message with Group Channel Description OIE but without the Cell Channel Description OIE.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL RELEASE 3BK 11203 0138 DSZZA 89/639

6.7.1

GENERAL DESCRIPTION 8 0 0 0 7 0 0 1 6 0 0 1 5 0 0 1 4 0 1 0 3 1 1 0 2 1 0 1 1 0 1 1

RR Cause BA Range (optional)

RR CAUSE VALUE Length of BA range contents Range1 Lower (high) Number of Ranges

Range1_Lower Range1_Higher (high) (low) Range1_Higher (low) Range2_Lower (high) Range2_Lower (low) Range2_Higher (low)

Range2_High er (high)

Range3_Lower Range3_Higher (high) (low) Range3_Higher (low) Range4_Lower (high) Range4_Lower (low) Range4_Higher (low) : Group Channel description 0 1 1 1 0 : 1 0

Range3_Lower (high)

Range4_High er (high)

Channel type and TDMA offset TSC MAIO low part MA C 8n MA C 8 MA C 8n-1 H=1-> H=0->

Length of Group Channel Description contents MAIO (high part) spare HSN A R F C N (low part) TN

ARFCN (Hpart)

.......

MA C 8n-7 MA C 1

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL RELEASE 3BK 11203 0138 DSZZA 90/639

GPRS Resumption (optional, GPRS MS only Cell Channel Description

1 0 Bit 128 Bit 120

1 1 Bit 127 Bit 119

0 1 0 spare Bit 118

0 0 0 spare Bit 117

0 0 0 ACK Spare Spare Spare 0 Bit 124 Bit 116 0 Bit 123 Bit 115 1 Bit 122 Bit 114 0 Bit 121 Bit 113

Cell selection indicator after release of all TCH and SDCCH

Bit 008 0

Bit 007 1

Bit 006 1

Bit 005 1

Bit 004 0

Bit 003 1

Bit 002 1

Bit 001 1

Length of Cell selection indicator content See description below

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL RELEASE 3BK 11203 0138 DSZZA 91/639

6.7.2 RR CAUSE TYPE: M DEFINITION To provide the reason for release. BIT DESCRIPTION 8 7 6 RR CAUSE VALUE 5 4 3 2 1

SUB PARAMETER DEFINITION The RR cause used: Bits 8 7 6 5 4 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 1 2 0 0 1 0 0 1 0 1 1 0 1

Normal event Abnormal release, unspecified Abnormal release, timer expired Abnormal release, no activity on the radio path Pre-emptive release all other causes are not supported.

PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL RELEASE 3BK 11203 0138 DSZZA 92/639

6.7.3 BA RANGE TYPE: O DEFINITION To provide the mobile station with ARFCN range information which can be used in the cell selection procedure. BIT DESCRIPTION 8 0 1 7 1 6 5 1 4 0 3 0 2 1 1 1 1 3

Length of BA range contents RANGE1_LOWER (high) Number of ranges

RANGE1_LO RANGE1_HIGHER (high) WER (low) RANGE1_HIGHER (low) RANGE2_LOWER (high) RANGE2_LOWER (low) RANGE2_HIGHER (low)

5 6

RANGE3_LO RANGE3_HIGHER (high) WER (low) RANGE3_HIGHER (low) RANGE4_LOWER (high) RANGE4_LOWER (low) RANGE4_HIGHER (low) : SUB PARAMETER DEFINITION : n

RANGE3_LOWER (high)

RANGE2_HIG 7 HER (high) 8 9 10 11

RANGE4_HIG 12 HER (high) 13

A maximum of 13 different ranges is supported, to fit into maximum 2 LAPDm frames. PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL RELEASE 3BK 11203 0138 DSZZA 93/639

6.7.4

GROUP CHANNEL DESCRIPTION 5 4 3 2 1 Group Channel Description IEI Length of Group Channel Description contents Channel type and TDMA offset TN H=1-> MAIO (high part) TSC --- H -- ---------------------------------------------------ARFCN 0 H=0-> spare (high part) MAIO HSN (low part) ARFCN (low part) MA MA MA MA MA MA MA MA C C C C C C C C 8n 8n-1 8n-2 8n-3 8n-4 8n-5 8n-6 8n-7 MA C 008 MA C 007 MA C 006 MA C 005 MA C 004 MA C 003 MA C 002 MA C 001 8 7 6 octet 1 octet 2 octet 3 octet 4

octet 5 octet 6

octet n+5

SUB PARAMETER DEFINITION Octet 3 Channel type and TDMA offset. Bits 8 7 6 5 4 0 0 0 0 1 TCH/FS + ACCHs (speech codec version 1) 0 0 0 1 T TCH/HS + ACCHs (speech codec version 1) 1 0 0 0 0 TCH/FS + ACCHs (speech codec version 2) (not used) 0 0 1 T T SDCCH/4 + SACCH/C4 (not used) 0 1 T T T SDCCH/8 + SACCH/C8 (not used) all other values are reserved. T bit indicates the Subchannel Number. TN : Time slot (0 to 7) Octets 4 and 5: TSC : Training Sequence Code (0 to 7) H : "0" Single RF channel "1" RF hopping channel

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL RELEASE 3BK 11203 0138 DSZZA 94/639

Channel selector: H = "0": The channel selector field consists of the absolute RF channel number. Bits 4 3 0 0 spare ARFCN: Octet2 Octet 3 Bits 2,1 High part of ARFCN Bits 8 to 1 ARFCN low part

The ARFCN is coded as the binary representation of the absolute RF channel Number. Range 0 to 1023. H = "1": MAIO: The channel selector field consists of the mobile allocation index offset, MAIO, and the hopping sequence number, HSN. Bits 4 to 1 High part Bits 8 to 7 Low part

Octet 2 Octet 3

HSN (Octet 3, Bits 1 to 6): Value 0 to 63. The HSN field is coded as the binary representation of the hopping sequence number. Octet 6 (n+5) MA length depends on the relative frequency span of the frequencies in the cell allocation frequency list MA Ci: Mobile Allocation RF Channel i - the RF channels represented in the MA C i bit fields are those which in the "Cell Channel Description" information element are coded with "1" in the CA ARFCN N bit fields. MA Ci = CA ARFCN N(i) i = 1,2...NF

(NF = Number of Frequencies in the CA frequency list). For a RF channel belonging to the Mobile Allocation the MA C i bit is coded with a "1", for a RF channel not belonging to the Mobile Allocation, the MA C i bit is coded with a "0". If NF mod 8 0 then bits NF to 8n in octet 3 must be coded with a "0" in each.

PARAMETER ORIGIN - ACTION ON PARAMETER These parameters are transparent for the BTS when received. At the BSC site, the BSC has to provide the following information: Channel type and TDMA offset and TN depends of the resource to be allocated by the resource manager. H: fixed value according if hopping is used or not (this information has to be provided by O&M). Channel selector. Mobile Allocation Stored and Updated during system reconfiguration. LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL RELEASE 3BK 11203 0138 DSZZA 95/639

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

6.7.5 GPRS RESUMPTION TYPE: O DEFINITION The purpose of the GPRS Resumption information element is to indicate whether the network has successfully resumed GPRS services or not. BIT DESCRIPTION 8 1 7 1 IEI 6 0 5 0 4 0 3 0 2 0 ACK 1

Spare Spare Spare

SUB PARAMETER DEFINITION The ACK field (1 bit) is the binary acknowledge of a successful resumption of GPRS services: 0 resumption of GPRS services not successfully acknowledged; 1 resumption of GPRS services successfully acknowledged.

PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL RELEASE 3BK 11203 0138 DSZZA 96/639

6.7.6

CELL CHANNEL DESCRIPTION

TYPE: O DEFINITION To provide the reference frequency list to be used to decode the mobile allocation information element.

BIT DESCRIPTION Bitmap 0 format 8 0 0 7 0 0 6 0 0 5 0 0 4 1 124 3 0 2 1 1 0 121 113 003 002 001 1

FORMAT-ID 120 008 007

CA ARFCN ......................... ........... 006 CA ARFCN 005 004

123

CA ARFCN

122

2 3

17

Bits 5 and 6 are spare bits in octet 2. SUB PARAMETER DEFINITION FORMAT-ID : Format identifier Only bitmap 0 Format is supported.

CA ARFCN N : Cell Allocation Absolute Radio Frequency Channel Number N CA ARFCN N : "0" not belonging to the cell allocation "1" belonging to the cell allocation PARAMETER ORIGIN - ACTION ON PARAMETER Format-ID: Fixed value = 00. CA ARFCN N : Value stored in BSC and updated according to system reconfigurations.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL RELEASE 3BK 11203 0138 DSZZA 97/639

Range 1024 format 8

supported 7 0 spare 6 0 spare 0 FORMID W(1) (low part) 5 4 F0 3 W(1) (high part) 2 1 1 2 3 4 5 6 7 8 9 10 W(11) (high) W(12) (high part) W(13) (high part) W(14) (high part) W(15) (high part) W(16) 11 12 13 14 15 16

1 0 FORMAT-ID

W(2) (high part) W(2) (low) W(3) (low part) W(4) (low part) W(5) (low part) W(6) (low part) W(7) (low part) W(8) (low) W(10) W(11) (low part) W(12) (low part) W(13) (low part) W(14) (low part) W(15) (low part) W(3) (high part) W(4) (high part) W(5) (high part) W(6) (high part) W(7) (high part) W(8) (high part) W(9)

SUB PARAMETER DEFINITION FORMAT-ID F0 : Format identifier.

: Frequency indicator 0 ARFCN 0 is not a member of the set 1 ARFCN 0 is a member of the set : Each W(i) encodes a non negative integer in binary. if W(k) is null, W(K+1) to W(16) must be null also.

W(i)

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL RELEASE 3BK 11203 0138 DSZZA 98/639

Range

512 format 1 0 FORMAT-ID 8 7

supported 0 spare 6 0 spare 5 4 1 0 FORM-ID 3 0 2 ORIGARFCN high 1 1 2 3 4 5 6 7 W(7) (high) W(8) (high part) W(9) (high part) W(10) W(11) W(12) (low part) W(12) (high) W(13) (high part) W(14) W(15) W(16) (high) W(17) 8 9 10 11 12 13 14 15 16

ORIG-ARFCN (middle part) ORIGARFCN low W(1) (low part) W(2) (low) W(3) (low part) W(4) (low) W(1) (high part) W(2) (high part) W(3) (high part) W(4) (high part) W(5) W(6) W(7) (low part) W(8) (low part) W(9) (low part)

W(13) (low part)

W(16) (low part)

SUB PARAMETER DEFINITION FORMAT-ID : Format identifier.

ORIG-ARFCN : This field encodes the ARFCN of one frequency belonging to the set. This value is also used to decode the rest of the element. W(i) : Each W(i) encodes a non negative integer in binary. if W(k) is null, W(K+1) to W(17) must be null also.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL RELEASE 3BK 11203 0138 DSZZA 99/639

Range

256 format 8 7

supported 6 5 4 3 2 1

1 0 FORMAT-ID

0 spare

0 spare

0 FORM-ID

ORIG-ARFCN (middle part) ORIGARFCN low W(1) (loW) W(1) (high part) W(2) W(3) W(4) (low part) W(5) (low part) W(6) (low) W(7) W(8) (low part) W(10) W(12) W(9) (high part)

ORIGARFCN high

1 2 3 4

W(4) (high) W(5) (high part) W(6) (high part) W(8) (high)

5 6 7 8 9 10 11 12 13 14 15 16

W(9) (low) W(11) (low part) W(13) W(14) (low part) W(16) (low part) W(18) (low part) W(20) (low part)

W(11) (high)

W(14) (high part) W(15) W(17) W(19) W(21) W(16) (high) W(18) (high) W(20) (high) 0 spare

SUB PARAMETER DEFINITION FORMAT-ID : Format identifier.

ORIG-ARFCN : This field encodes the ARFCN of one frequency belonging to the set. This value is also used to decode the rest of the element. W(i) : Each W(i) encodes a non negative integer in binary. if W(k) is null, W(K+1) to W(21) must be null also.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL RELEASE 3BK 11203 0138 DSZZA 100/639

Range

128 format 8 7

supported 6 5 4 3 2 1

1 0 FORMAT-ID

0 spare

0 spare

1 FORM-ID

ORIG-ARFCN (middle part) ORIGARFCN low W(1) W(2) W(3) (low part) W(4) (low) W(6) (low part) W(8) W(10) W(12) W(14) W(16) W(18) (low) W(21) (low) W(24) W(26) (low) W(27) W(19) W(22) W(25) W(28) W(17) W(20) W(23) W(5) W(7) W(9) W(11) W(13) W(15)

ORIGARFCN high

1 2 3

W(3) (high part) W(4) (high part) W(6) (high part)

4 5 6 7 8 9 10 11

W(18) (high) W(21) (high)

12 13 14 15 16

W(26) (high) 0 spare

SUB PARAMETER DEFINITION FORMAT-ID : Format identifier.

ORIG-ARFCN : This field encodes the ARFCN of one frequency belonging to the set. This value is also used to decode the rest of the element. W(i) : Each W(i) encodes a non negative integer in binary. if W(k) is null, W(K+1) to W(28) must be null also.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL RELEASE 3BK 11203 0138 DSZZA 101/639

Variable bit map format 8 7

supported 6 5 4 3 2 1

1 0 FORMAT-ID

1 1 FORMAT-ID (continued)

ORIG-ARFCN (middle part) ORIG- RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFC ARFCN 1 2 3 4 5 6 N (low) 7 : : RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFC 104 105 106 107 108 109 110 N 111 Bits 5 and 6 are spare bits in octet 2. SUB PARAMETER DEFINITION FORMAT-ID : Format identifier Bitmap 0 format is only supported for GSM 900 Variable bit map is only supported for DCS 1800, GSM850 and DCS1900

ORIGARFC N high

CA ARFCN N : Cell Allocation Absolute Radio Frequency Channel Number N CA ARFCN N : "0" not belonging to the cell allocation "1" belonging to the cell allocation ORIG-ARFCN : This field encodes the ARFCN of one frequency belonging to the set. This value is also used as the origin of the bit map to generate all the other frequencies. RRFCN N: Relative radio frequency channel number N - For an RF channel with ARFCN = ORIG-ARFCN + N) mod 1024 belonging to the set, then RRFCN N bit is coded as '1'. - For an RF channel with ARFCN = (ORIG-ARFCN + N) mod 1024 not belonging to the set, then RRFCN N bit is coded as '0'. PARAMETER ORIGIN - ACTION ON PARAMETER CA ARFCN N, ORIG-ARFCN, RRFCN : values stored in BSC and updated according to system reconfigurations.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL RELEASE 3BK 11203 0138 DSZZA 102/639

6.7.7

CELL SELECTION INDICATOR AFTER RELEASE OF ALL TCH AND SDCCH

TYPE: O DEFINITION This IE indicates on which frequency /cell the cell selection after channel release shall be performed.

BIT DESCRIPTION <Cell Selection Indicator after release of all TCH and SDCCH value part> ::= { 000 { 1 <GSM Description : <GSM Description struct >} ** 0 | 001 { 1 <UTRAN FDD Description : < UTRAN FDD Description struct >> } ** 0 | 010 { 1 <UTRAN TDD Description : < UTRAN TDD Description struct >> } ** 0 }; < GSM Description struct > ::= < Band_Indicator : bit > < ARFCN : bit (10) > < BSIC : bit (6) > ; < UTRAN FDD Description struct > ::= {0|1 < Bandwidth_FDD : bit (3) > } < FDD-ARFCN : bit (14) > {0|1 < FDD_Indic0 : bit > < NR_OF_FDD_CELLS : bit (5) > < FDD_CELL_INFORMATION Field : bit (p(NR_OF_FDD_CELLS)) > } ; < UTRAN TDD Description struct > ::= {0|1 < Bandwidth_TDD : bit (3) > } < TDD-ARFCN : bit (14) > {0|1 < TDD_Indic0 : bit > < NR_OF_TDD_CELLS : bit (5) > < TDD_CELL_INFORMATION Field : bit (q(NR_OF_TDD_CELLS)) > } ; Note: only FDD-ARFCN field in UTRAN FDD description, or Bandwidth_TDD and TDD-ARFCN in UTRAN TDD Description are used in B10. Example 1 (3 FDD descriptions are sent to MS): 8 0 0 7 1 0 FDD-ARFCN 1 6 1 1 5 1 1 0 4 0 0 1 3 1 2 1 1 1

Length of Cell selection indicator content FDD-ARFCN 1 0 FDD-ARFCN 2 FDDARF CN 3 FDD-ARFCN 1

FDD-ARFCN 2 FDD-ARFCN 2 0 FDD-ARFCN 3 1

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL RELEASE 3BK 11203 0138 DSZZA 103/639

FDD-ARFCN 3 Example 2 (3 TDD descriptions are sent to MS): 8 0 0 7 1 1 6 1 0 5 1 1 4 0 1

spare

3 1

2 1

1 1

Length of Cell selection indicator content Bandwidth_TDD 0 1 TDD-ARFCN 1

Bandwidth_TDD 0

TDD-ARFCN 1

TDD-ARFCN 2 1

TDD-ARFCN 2

TDD-ARFCN 2 1 Bandwidth_TDD 0 0

TDD-ARFCN 3 TDD-ARFCN 3

SUB PARAMETER DEFINITION Band_Indicator (1 bit field) 0 ARFCN indicates 1800 band 1 ARFCN indicates 1900 band Not used. ARFCN (10 bit field) The ARFCN is coded as the binary representation of the absolute RF channel number. Range 0 to 1023 Not used. BSIC (6 bit field) Base Station Identity Code is compsed of NCC and BCC. Range 0 to 63 Not used. Bandwidth_FDD (3bit field) This optional information element will be used for future releases of the protocol. When missing, this indicates the present FDD bandwidth. When present, this shall not be considered as an error; indices of the 3G Neighbour Cell list shall be incremented accordingly. Not used. FDD_ARFCN (14 bit field) This optional information element is defined as the UARFCN in 3GPP TS 25.101. Any non-supported frequency shall not be considered as an error; indices of the 3G Neighbour Cell list shall be incremented accordingly. Set by O&M. FDD_Indic0, information 0 indicator (1 bit): This field indicates if the FDD_CELL_INFORMATION parameter value '0000000000' is a member of the set. Bit ED EVOLIUM 05 RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL RELEASE 3BK 11203 0138 DSZZA 104/639

0 parameter value '0000000000' is not a member of the set 1 parameter value '0000000000' is a member of the set Not used. NR_OF_FDD_CELLS (5 bit field) This field defines the number of FDD_CELL_INFORMATION parameters. Not used. FDD_CELL_INFORMATION Field (p bit field) For each (10-bit-long) decoded Parameter, bits 1-9 are the Scrambling Code and bit 10 is the corresponding Diversity Parameter. The total number of bits p of this field depends on the value of the parameter NR_OF_FDD_CELLS = n, as follows: n p n p n p n p 0 0 5 44 10 81 15 116 1 10 6 52 11 88 16 122 2 19 7 60 12 95 17-31 0 3 28 8 67 13 102 4 36 9 74 14 109 Not used. Bandwidth_TDD (3 bit field) Bit 321 000 3.84Mcps 001 1.28Mcps All other values shall not be interpreted as an error; indices of the 3G Neighbour Cell list shall be incremented accordingly (and no measurements can be performed). When missing, this indicates 3.84 Mcps. Set to 001. TDD_ARFCN (14 bit field) This optional information element is defined as the UARFCN in 3GPP TS 25.102. Any non-supported frequency shall not be considered as an error; indices of the 3G Neighbour Cell list shall be incremented accordingly. Set by O&M. NR_OF_TDD_CELLS (5 bit field) This field defines the number of TDD_CELL_INFORMATION parameters. Not used. TDD_CELL_INFORMATION Field (q bit field) For each (9-bit-long) decoded Parameter, bits 1-7 are the Cell Parameter, bit 8 is the Sync Case TSTD and bit 9 is the Diversity TDD bit. The total number of bits q of this field depends on the value of the parameter NR_OF_TDD_CELLS = m, as follows: m q m q m q m q m q 0 0 5 39 10 71 15 101 20 126 1 9 6 46 11 77 16 106 21-31 0 2 17 7 53 12 83 17 111 3 25 8 59 13 89 18 116 4 32 9 65 14 95 19 121 Not used. PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL RELEASE 3BK 11203 0138 DSZZA 105/639

6.8

NAME

CHANNEL REQUEST
RADIO RACH 44.018

CHANNEL REQUEST ABIS A

INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION

This message is sent in random mode on the RACH. It does not follow the basic format. From: MS INFORMATION ELEMENT NAME To: BTS TYPE COMMENT LENGTH (byte) 1 1 TIMER _

INFORMATION ELEMENT LIST

See the next page

Unformatted 8 bit field

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. CHANNEL REQUIRED towards the BSC ABNORMAL SITUATION _

Paging and Access Grant Control (ref. [1]) Radio and Link Establishment (ref. [2]) FBS GPRS - Radio interface - RRM sublayer - PCC

(ref. [29])

ED EVOLIUM

04

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL REQUEST 3BK 11203 0138 DSZZA 106/639

6.8.1

GENERAL DESCRIPTION

BIT DESCRIPTION 8 Establ. Cause 7 6 5 4 3 2 Random 1

Reference

SUB PARAMETER DEFINITION Establishment cause: This information field indicates the reason for requesting the establishment of a connection. This field has a variable length (from 3 bits up to 6 bits). 2 X X X X X X X X X X X x X X X 0 X x 1 X 0 1 1 1 X X X X X X X X X X X x X X X X 0 x 1 0 1 1 1 MEANING OF ESTABLISHMENT CAUSE. Emergency call. Call Re-establishment. TCH/F was in use, or TCH/H was in use but the network does not set NECI bit to 1. Call Re-establishment. TCH/H was in use and the network sets NECI bit to 1. Call Re-establishment. TCH/H + TCH/H was in use and the network sets NECI bit to 1. Answer to paging, see Note 2. Originating Call and TCH/F is needed, or originating call, or procedures which can be completed with an SDCCH, and the network does not set NECI bit to 1. Originating speech call from dual-rate mobile station when TCH/H is sufficient and the network sets NECI bit to 1. Originating data call from dual-rate mobile station when TCH/H is sufficient and the network sets NECI bit to 1. Location Updating, and the network does not set the NECI bit to 1. Location Updating, and the network sets the NECI bit to 1. Other procedures which can be completed with an SDCCH. e.g.; Short message services, IMSI detach, and the network sets the NECI bit to 1. One phase packet access with request for single timeslot uplink transmission; one PDCH is needed.

8 1 1 0 0 1 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0

7 0 1 1 1 0 0 0 0 1 1 1 0 0 0 1 1 1 1 1 1 1 1 1

6 1 0 1 1 0 1 1 0 1 0 0 0 0 0 1 1 1 1 1 1 1 1 1

5 X X 0 0 X 0 1 1 X 0 1 x 0 1 1 1 1 1 0 0 0 0 1

4 X X 1 1 X X X X X X X x X X 1 1 1 0 0 0 0 0 1

3 X X 0 1 X X X X X X X x X X 0 X X x 1 X X 0 1

Single block packet access; one block period on a PDCH is needed for two phase packet access or other RR signalling purpose. LMU establishment (not implemented) Reserved for future use. Reserved for future use. LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL REQUEST 3BK 11203 0138 DSZZA 107/639

ED EVOLIUM

04

RELEASED

0138_05.doc 15/02/2008

Note 1: The codings above highlighted in bold are equivalent to those expected from a phase 1 GSM mobile. Note 2: The coding of CHANNEL REQUEST message (when answering to paging for RR connection establishment) is as follows: Paging Indication Any Channel SDCCH TCH/ F Full rate only 100XXXXX 0001XXXX MS Capability 100XXXXX 0010XXXX 0001XXXX Dual Rate SDCCH only 100XXXXX 0001XXXX 0001XXXX

TCH/H or TCH/F Random reference

100XXXXX

100XXXXX

0011XXXX

0001XXXX

This is an unformatted field of variable length from 5 to 2 bits PARAMETER ORIGIN - ACTION ON PARAMETER . All the establishment cause values are accepted by the BTS which builds a CHANNEL REQUIRED message and send it to the BSC (no check is made). The BSC will discard the following CHANNEL REQUIRED message: a CHANNEL REQUIRED message received with a Random Access Information field (ie. Channel Request content) set to 001X XXXX, 010X XXXX, or 011X XXXX. See reference [25]; a CHANNEL REQUIRED message with the content Reserved for future use (ie. 0110 0xx0, 0110 0x01, 0110 0011, or 0111 1111); a CHANNEL REQUIRED message with the content 0110 0111 (LMU establishment).

ED EVOLIUM

04

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CHANNEL REQUEST 3BK 11203 0138 DSZZA 108/639

6.9

NAME

CIPHERING MODE COMMAND


RADIO SDCCH/FACCH 44.018

CIPHERING MODE COMMAND ABIS A

INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION

This message is sent on the main DCCH from the BSC to the MS to indicate that the network has started or stopped (3) deciphering and that enciphering and deciphering shall be started or stopped (3) in the MS, or to indicate that ciphering will not be performed. From: BSC INFORMATION ELEMENT NAME To: MS TYPE COMMENT LENGTH (byte) 2 3 TIMER

DIRECTION

INFORMATION ELEMENT LIST

Header Cipher Mode Setting Cipher response

M V M V

Note (1) Note (2)

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT Start ciphering and deciphering at the MS side. Or Stop ciphering (3). Ciphering procedure (ref. [4]) ABNORMAL SITUATION

SPECIF DOC. REF. (1) (2) (3)

Multiple algorithms supported in GSM phase 2 New field for GSM phase 2, set to 0 to phase 1 MSs Phase 2 MSs only

Timer Control of this procedure is in the MSC not in the BSS. This message (ciphering mode command) is sent to the MS as User Data of the encryption command message addressed to the BTS. (See 3GPP TS 08.58).

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CIPHERING MODE COMMAND 3BK 11203 0138 DSZZA 109/639

6.9.1

GENERAL DESCRIPTION 8 0 0

7 0 0 0

6 0 1 0

5 0 1 CR

4 0 0

3 1 1

2 1 0

1 0 1 SC

Cipher Response Ciphering Mode setting

Algorithm identifier

6.9.2 CIPHER MODE SETTING TYPE: M DEFINITION The purpose of the cipher mode setting information element is to indicate whether stream ciphering shall be started or not. When ciphering is started, it indicates the algorithm to be used (except for GSM phase 1 MS). BIT DESCRIPTION 8 7 6 5 Algorithm identifier 4 3 2 SC 1

SUB PARAMETER DEFINITION Algorithm Identifier If SC = 1 then: Bits 432 000 001 010 011 100 101 110 111 Cipher with algorithm A5/1 Cipher with algorithm A5/2 Cipher with algorithm A5/3 Cipher with algorithm A5/4 Cipher with algorithm A5/5 Cipher with algorithm A5/6 Cipher with algorithm A5/7 Reserved

Not supported in this release Not supported in this release Not supported in this release Not supported in this release Not supported in this release Not supported in this release

Bits 2, 3 and 4 are always set to 0 for GSM Phase 1 MS. SC bit: "0": No ciphering "1": Start ciphering

PARAMETER ORIGIN - ACTION ON PARAMETER According to the ciphering procedure scenario, the value 0 is used when no ciphering is needed.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CIPHERING MODE COMMAND 3BK 11203 0138 DSZZA 110/639

6.9.3 CIPHER RESPONSE TYPE: M DEFINITION The purpose of the cipher response information element is to indicate to the mobile which information should be included in the CIPHERING MODE COMPLETE message. BIT DESCRIPTION 8 0 7 0 6 0 5 4 3 2 1

CR

SUB PARAMETER DEFINITION CR bit: "0": IMEISV shall not be included "1": IMEISV shall be included

PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CIPHERING MODE COMMAND 3BK 11203 0138 DSZZA 111/639

6.10 CIPHERING MODE COMPLETE


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO SDCCH/FACCH 44.018

CIPHERING MODE COMPLETE ABIS BTS Transparent NA A

This message is sent on the main DCCH from the Mobile Station to the network to indicate that enciphering and deciphering has been started or stopped in the Mobile Station. From: MS INFORMATION ELEMENT NAME To: BSC TYPE COMMENT LENGTH (byte) 2 11 2-12 TIMER

DIRECTION

INFORMATION ELEMENT LIST

Header Mobile Equipment Identity

O TLV

Note (1)

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT ABNORMAL SITUATION

SPECIF DOC. REF. (1)

Ciphering procedure

(ref. [4])

Set if CR field in Ciphering mode command was set to 1. GSM Phase 2 Mobiles only. This element is only sent to the MSC if received from the MS. (See 3GPP TS 08.08).

Timer in MSC is stopped on reception of this message.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CIPHERING MODE COMPLETE 3BK 11203 0138 DSZZA 112/639

6.10.1 GENERAL DESCRIPTION 8 7 0 0 0 Mobile 0 0 0

6 0 1 0

5 0 1 1

4 0 0 0

3 1 0 1

2 1 1 1

1 0 0 1 1 : Phase 2 Mobiles Field Optional

Length of Mobile Equipment Identity contents ID digit 3 ID digit 1 OEI 0 ID digit 2 1

Identity

ID digit p+1

ID digit P

6.10.2 MOBILE EQUIPMENT IDENTITY TYPE: O DEFINITION To provide the IMEISV. IMEISV = 16 digits BIT DESCRIPTION 1 2 3 4 N 0 8 0 7 0 6 1 5 0 4 1 3 1 2 1 1

ID digit 1 ID digit 3 ...

Length of Mobile Identity Contents OEI

ID digit 2 ...

Type of ID

ID digit p+1

ID digit p

SUB PARAMETER DEFINITION Type of ID: 0 1 1 IMEISV

OEI: Odd Even Indicator value 0: even number of identity digits 1: odd number of digits

Filled digit 1 1 1 1 For the IMEISV this field is coded using BCD coding. If the number of identity digits is even then bits 5 to 8 of the last octet shall be filled with an end mark coded as '1111'. PARAMETER ORIGIN - ACTION ON PARAMETER BSC and BTS are transparent to this parameter. Octet 3

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CIPHERING MODE COMPLETE 3BK 11203 0138 DSZZA 113/639

6.11 CLASSMARK CHANGE


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION RADIO FACCH/SDCCH 44.018

CLASSMARK CHANGE ABIS Transparent NA A

This message is sent on the main DCCH by the Mobile Station to the BSS to indicate a Classmark change. From MS To BSS TYPE M V M LV C TLV INFORMATION ELEMENT NAME COMMENT LENGTH (byte) 2 4 3-34 40 TIMER -

INFORMATION ELEMENT LIST

Header MS Classmark (MS classmark 2) Add MS Classmark (MS classmark 3)

Note 1 Note 2

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. Note 1: Note 2: ABNORMAL SITUATION

Classmark handling

(ref. [9])

Format changed from GSM Phase 1 New element in GSM Phase 2

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CLASSMARK CHANGE 3BK 11203 0138 DSZZA 114/639

6.11.1 GENERAL DESCRIPTION Phase 1 MS 8 0 0 Mobile Station Classmark 2 7 0 0 Revision level 0 6 0 0 5 0 1 Length 4 0 0 3 1 1 2 1 1 RF power Capability 1

0 0

Encryption Algorithm 0 SM. cap

Frequency capability

Phase 2 MS

8 0 0

7 0 0

6 0 0

5 0 1

4 0 0

3 1 1

2 1 1

1 0 0

Mobile Station Classmark

0 Revision ESRF power A5/1 spare level IND Capability 0 PS SS Screen SM. FC spare Capa. Indicator cap VBS VGCS 0 LCS VA UCS2 SoLSA CMSP A5/3 A5/2 CM3 CAP spare 0 0 1 0 0 0 0 0 Length

Length = 3

Additional Mobile Classmark Information

1 - 12 bytes (see 6.11.4 for detail)

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CLASSMARK CHANGE 3BK 11203 0138 DSZZA 115/639

6.11.2 MS CLASSMARK 2 - GSM Phase 1 TYPE: M DEFINITION Defines certain attributes of the Mobile Station equipment in use on a particular transaction. BIT DESCRIPTION 8 7 Revision level 0 6 5 Length 4 3 2 1 1 2 3

Encryption Algorithm 0 SM. cap

RF power Capability Frequency capability

Bits 8-5 of octet 3 spare set to 0. SUB PARAMETER DEFINITION Octet 2 Bits Revision level Bits Encryption Algorithm Bits RF Power capability GSM900 876 000 54 00 321 000 001 010 011 100 000 001 000 001 010

Reserved for phase 1. All other values reserved algorithm A5/1 All other values reserved. class 1 class 2 class 3 class 4 class 5 All other values reserved class 1 class 2 All other values reserved class 1 class 2 class 3 All other values reserved

DCS1800 DCS1900

Octet 3 Bit SM Capability Bits FC Frequency Capability

4 0 1 321 000

short message capability not present short message capability present Band no 0 Other values reserved.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CLASSMARK CHANGE 3BK 11203 0138 DSZZA 116/639

PARAMETER ORIGIN - ACTION ON PARAMETER This is the MS classmark 2 as sent by a phase 1 MS. The BSC takes this information in order to have the MS power capability for the power control algorithm. Note: The BSC will decode the two octets of this IE value as if they were the two first octets of a phase 2 MS classmark 2 IE value.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CLASSMARK CHANGE 3BK 11203 0138 DSZZA 117/639

6.11.3 MS CLASSMARK 2 - GSM Phase 2 TYPE: M DEFINITION Defines certain attributes of the Mobile Station equipment in use on a particular transaction. BIT DESCRIPTION 8 0 spare 0 spare CM3 7 6 5 Length 4 3 2 RF power Capability VBS CMSP VGCS A5/3 1 1 2 FC A5/2 3 4

Revision ES level IND PS SS Screen. Capa. Indicator 0 spare


LCS VA CAP

A5/1 SM. cap

UCS2

SoLSA

Bit 8 of octet 2 spare set to 0 Bits 8 of octet 3 spare set to 0 SUB PARAMETER DEFINITION Octet 2: Bits Revision level 76 00 01 10 5 0 1 Bit A5/1 Bits RF Power capability P-GSM, GSM850 and E-GSM 4 0 1 321 000 001 010 011 100 000 001 010 000 001 010

Bit ES-IND

Reserved for phase 1 Used by phase 2 MS Used by mobile stations supporting R99 or later versions of the protocol All other value reserved Controlled Early Classmark Sending option not implemented. Controlled Early Classmark Sending option implemented. algorithm A5/1 available algorithm A5/1 not available. class 1 class 2 class 3 class 4 class 5 All other values reserved class 1 class 2 class 3, handled as class 1 All other values reserved class 1 class 2 class 3, handled as class 1

DCS1800

DCS1900

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CLASSMARK CHANGE 3BK 11203 0138 DSZZA 118/639

All other values reserved

Octet 3: Bit PS Capability Bits SS Screening Indicator

Bit SM Capability Bit VBS Voice Broadcast Service Bit VGCS Voice Call Service Bit FC Capability

7 0 1 65 00 01 10 11 4 0 1 3 0

PS capability not present PS capability present Defined in GSM 04.80 Defined in GSM 04.80 Defined in GSM 04.80 Defined in GSM 04.80 MS does not support mobile terminated point to point SMS. MS supports mobile terminated point to point SMS. no VBS capability or no notifications wanted

Group

1 VBS capability and notifications wanted Not implemented in the BSS. 2 0 no VGCS capability or no notifications wanted 1 1 0 1 0 The MS does not support the extension band G1 in addition to the primary GSM band. The MS does support the extension band G1. Reserved for future use VGCS capability and notifications wanted

Frequency GSM900

GSM850, DCS1800, DCS1900

Note: only FC is checked in this release and only in GSM900 configuration.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CLASSMARK CHANGE 3BK 11203 0138 DSZZA 119/639

Octet 4 Bit CM3 Classmark 3 Bit LCS VA capability

8 0 1 6 0

No additional MS capability Additional MS capabilities are described in the MS Classmark 3 information element.

Bit UCS2 treatment

Bit SoLSA Bit CMSP: CM Service Prompt

Bit A5/3 algorithm supported Bit A5/2 algorithm supported

LCS value added location request notification capability not supported 1 LCS value added location request notification capability supported Not implemented in the BSS. 5 0 the ME has a preference for the default alphabet (defined in GSM 03.38) over UCS2 1 the ME has no preference between the use of the default alphabet and the use of UCS2. Not implemented in the BSS. 4 0 The ME does not support SoLSA 1 The ME supports SoLSA. 3 0 "Network initiated MO CM connection request" not supported 1 "Network initiated MO CM connection request" supported for at least one CM protocol. Not implemented in the BSS. 2 0 A5/3 not available 1 A5/3 available 1 0 A5/2 not available 1 A5/2 available Note: only A5/2 is checked in this release.

PARAMETER ORIGIN - ACTION ON PARAMETER The BSC takes this information in order to have the MS power capability for the power control algorithm, the MS frequency capability and the MS ciphering capability. Additional mobile info can be obtained by invoking the classmark interrogation procedure.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CLASSMARK CHANGE 3BK 11203 0138 DSZZA 120/639

6.11.4 MS CLASSMARK 3 TYPE: C DEFINITION Defines certain attributes of the Mobile Station equipment in use on a particular transaction. BIT DESCRIPTION 8 0 7 0 6 1 5 0 4 0 3 0 2 0 1 0 1 2 3 - 34

Length

Classmark 3 Value part (See CSN.1 description below) <Classmark 3 Value part> ::= < spare bit > { < Multiband supported : { 000 } > < A5 bits > | < Multiband supported : { 101 | 110 } > < A5 bits > < Associated Radio Capability 2 : bit(4) > < Associated Radio Capability 1 : bit(4) > | < Multiband supported : { 001 | 010 | 100 } > < A5 bits > < spare bit >(4) < Associated Radio Capability 1 : bit(4) > } { 0 | 1 < R Support > } { 0 | 1 < HSCSD Multi Slot Capability > } < UCS2 treatment: bit > < Extended Measurement Capability : bit > { 0 | 1 < MS measurement capability > } { 0 | 1 < MS Positioning Method Capability > } { 0 | 1 < ECSD Multi Slot Capability > } { 0 | 1 < 8-PSK Struct > } { 0 | 1 < GSM 400 Bands Supported : { 01 | 10 | 11 } > < GSM 400 Associated Radio Capability : bit(4) > }

{ 0 | 1 <GSM 850 Associated Radio Capability : bit(4) > } { 0 | 1 <PCS 1900 Associated Radio Capability : bit(4) > } < UMTS FDD Radio Access Technology Capability : bit > < UMTS 3.84 Mcps TDD Radio Access Technology Capability : bit > < CDMA 2000 Radio Access Technology Capability : bit > {0|1 < DTM GPRS Multi Slot Sub-Class : bit(2) > < Single Slot DTM : bit > { 0 | 1< DTM EGPRS Multi Slot Sub-Class : bit(2) > } }

{0|1 < Single Band Support> { 0 | 1 <GSM 750 Associated Radio Capability : bit(4)>}

< UMTS 1.28 Mcps TDD Radio Access Technology Capability : bit > < GERAN Feature Package 1 : bit > ED EVOLIUM 05 RELEASED LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CLASSMARK CHANGE 3BK 11203 0138 DSZZA 121/639

0138_05.doc 15/02/2008

{ 0 | 1 < Extended DTM GPRS Multi Slot Class : bit(2) > < Extended DTM EGPRS Multi Slot Class : bit(2) > } { 0 | 1 < High Multislot Capability : bit(2) > } { 0 | 1 < GERAN Iu Mode Capabilities > } < GERAN Feature Package 2 : bit > < GMSK Multislot Power Profile : bit (2) > < 8-PSK Multislot Power Profile : bit (2) > { 0 | 1 < T-GSM 400 Bands Supported : { 01 | 10 | 11 } > < T-GSM 400 Associated Radio Capability: bit(4) > } { 0 | 1 < T-GSM 900 Associated Radio Capability: bit(4) > } < Downlink Advanced Receiver Performance : bit (2)> < DTM Enhancements Capability : bit > { 0 | 1 < DTM GPRS High Multi Slot Class : bit(3) > < Offset required : bit> { 0 | 1 < DTM EGPRS High Multi Slot Class : bit(3) > } } < Repeated ACCH Capability: bit > < A5 bits > ::= < A5/7 : bit > < A5/6 : bit > < A5/5 : bit > < A5/4 : bit > ; <R Support>::= < R-GSM band Associated Radio Capability : bit(3) > ; < HSCSD Multi Slot Capability > ::= < HSCSD Multi Slot Class : bit(5) > ; < MS Measurement capability > ::= < SMS_VALUE : bit (4) > < SM_VALUE : bit (4) > ; < spare bit > ; -- 1 also means support of GERAN Iu mode

< MS Positioning Method Capability > ::= < MS Positioning Method : bit(5) > ; < ECSD Multi Slot Capability > ::= < ECSD Multi Slot Class : bit(5) > ;

<8-PSK Struct> : := < Modulation Capability : bit > { 0 | 1 < 8-PSK RF Power Capability 1: bit(2) > } { 0 | 1 < 8-PSK RF Power Capability 2: bit(2) > } < Single Band Support > ::= < GSM Band : bit (4) > ;

< GERAN Iu Mode Capabilities > ::= < Length : bit (4) > < FLO Iu Capability : bit > <spare bits>** ; -- expands to the indicated length

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CLASSMARK CHANGE 3BK 11203 0138 DSZZA 122/639

SUB PARAMETER DEFINITION Multiband Supported (3 bit field) Band 1 supported (third bit of the field) Bit 3: 0 P-GSM not supported 1 P-GSM supported

Band 2 supported (second bit of the field) Bit 2: 0 E-GSM or R-GSM not supported 1 E-GSM or R-GSM supported Band 3 supported (first bit of the field) Bit 1: 0 DCS 1800 not supported 1 DCS 1800 supported

Note: The indication of support of P-GSM band or E-GSM or R-GSM band is mutually exclusive. For single band mobile station all bits are set to 0. A5/4 (1 bit field) 0 Encryption algorithm A5/4 not available 1 Encryption algorithm A5/4 available Not implemented in the BSS. A5/5 (1 bit field) 0 Encryption algorithm A5/5 not available 1 Encryption algorithm A5/5 available Not implemented in the BSS. A5/6 (1 bit field) 0 Encryption algorithm A5/6 not available 1 Encryption algorithm A5/6 available Not implemented in the BSS. A5/7 (1 bit field) 0 Encryption algorithm A5/7 not available 1 Encryption algorithm A5/7 available Not implemented in the BSS. Associated radio capability 1 (4 bit field): If either of P-GSM or E-GSM or R-GSM is supported, this field indicates the radio capability for PGSM, E-GSM or R-GSM, and the Associated radio capability 2 field indicates either the radio capability for DCS1800 when supported or is spare otherwise. If none of P-GSM or E-GSM or R-GSM are supported, this field indicates the radio capability for DCS1800, if supported. It corresponds to the first bit set to one of the multiband support bits (in increasing order starting from band 1) GSM900 0 0 0 1 class 1 0 0 1 0 class 2 0 0 1 1 class 3 0 1 0 0 class 4 0 1 0 1 class 5 All other values reserved DCS1800 0 0 0 1 class 1 0 0 1 0 class 2 0 0 1 1 class 3 handled as class 1 All other values reserved Not implemented in the DCS1900 BSS and GSM850 / DCS1900 BSS.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CLASSMARK CHANGE 3BK 11203 0138 DSZZA 123/639

Associated radio capability 2 (4 bit field): If either of P-GSM or E-GSM or R-GSM is supported, this field indicates the radio capability for DCS1800 if supported, and is spare otherwise DCS1800 0 0 0 1 class 1 0 0 1 0 class 2 0 0 1 1 class 3 handled as class 1 All other values reserved Not implemented in the DCS1900 BSS and GSM850 / DCS1900 BSS. R Support (1 bit field): 0 R-GSM band is not supported 1 R-GSM band is supported. Not implemented in the DCS1900 BSS and GSM850 / DCS1900 BSS. R-GSM band Associated Radio Capability (3 bits field) : 001 Class 1 : 20 W 010 Class 2 : 8W 011 Class 3 : 5W 100 Class 4 : 2W 101 Class 5 : 0.8 W HSCSD Multi Slot Class (5 bit field) In case the MS supports the use of multiple timeslots for HSCSD then the HSCSD Multi Slot Class field is coded as the binary representation of the multislot class defined in 3GPP TS GSM 45.002. Not implemented in the BSS. UCS2 treatment (1 bit field): 0 the ME has a preference for the default alphabet over UCS2 1 the ME has no preference between the use of the default alphabet and the use of UCS2 Not implemented in the BSS. Extended Measurement Capability (1 bit field): 0 the MS does not support Extended Measurements 1 the MS supports Extended Measurements Not implemented in the BSS. SMS_VALUE (Switch-Measure-Switch) (4 bit field): The SMS field indicates the time needed for the mobile station to switch from one radio channel to another, perform a neighbour cell power measurement, and the switch from that radio channel to another radio channel. Bits 4321 0000 1/4 timeslot (~144 microseconds) 0001 2/4 timeslot (~288 microseconds) 0010 3/4 timeslot (~433 microseconds) ... 1111 16/4 timeslot (~2307 microseconds) Not implemented in the BSS. SM_VALUE (Switch-Measure) (4 bit field): The SM field indicates the time needed for the mobile station to switch from one radio channel to another and perform a neighbour cell power measurement.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CLASSMARK CHANGE 3BK 11203 0138 DSZZA 124/639

Bits 4321 0000 1/4 timeslot (~144 microseconds) 0001 2/4 timeslot (~288 microseconds) 0010 3/4 timeslot (~433 microseconds) ... 1111 16/4 timeslot (~2307 microseconds) Not implemented in the BSS. MS Positioning Method Capability (1 bit field): This bit indicates whether the MS supports Positioning Method or not for the provision of Location Services. Not implemented in the BSS. MS Positioning Method (5 bit field): This field indicates the Positioning Method(s) supported by the mobile station. - MS assisted E-OTD Bit 5: 0 MS assisted E-OTD not supported 1 MS assisted E-OTD supported Not implemented in the BSS. - MS based E-OTD Bit 4: 0 MS based E-OTD not supported 1 MS based E-OTD supported Not implemented in the BSS. - MS assisted GPS Bit 3: 0 MS assisted GPS not supported 1 MS assisted GPS supported - MS based GPS Bit 2: 0 MS based GPS not supported 1 MS based GPS supported - MS conventional GPS Bit 1: 0 conventional GPS not supported 1 conventional GPS supported ECSD Multi Slot class (5 bit field): An MS that supports ECSD shall include this field to indicate its ECSD capability. Whether the MS is capable of 8-PSK modulation in uplink is indicated by the value of the Modulation Capability field in the 8-PSK struct. The ECSD Multi Slot Class field is coded as the binary representation of the multislot class defined in 3GPP TS 45.002 [32]. Not implemented in the BSS. Modulation Capability (1 bit field): Modulation Capability field indicates the supported modulation scheme by MS in addition to GMSK 0 8-PSK supported for downlink reception only 1 8-PSK supported for uplink transmission and downlink reception Not implemented in the BSS. 8-PSK RF Power Capability 1 (2 bit field) If 8-PSK is supported for both uplink and downlink, the 8-PSK RF Power Capability 1 field indicates the radio capability for GSM400, GSM700,GSM900 and GSM850. Not implemented in the BSS. 8-PSK RF Power Capability 2 (2 bit field) If 8-PSK is supported for both uplink and downlink, the 8-PSK RF Power Capability 2 field indicates the radio capability for DCS1800 or DCS1900 if supported, and is not included otherwise. Not implemented in the BSS.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CLASSMARK CHANGE 3BK 11203 0138 DSZZA 125/639

GSM 400 Bands Supported (2 bit field) Bits 21 0 1 GSM 480 supported, GSM 450 not supported 1 0 GSM 450 supported, GSM 480 not supported 1 1 GSM 450 supported, GSM 480 supported Not implemented in the BSS. GSM 400 Associated Radio Capability (4 bit field) If either GSM 450 or GSM 480 or both is supported, the GSM 400 Associated Radio Capability field indicates the radio capability for GSM 450 and/or GSM 480. Not implemented in the BSS. GSM 850 Associated Radio Capability (4 bit field) This field indicates whether GSM 850 band is supported and its associated radio capability. Bits 321 001 Class 1: 20 W 010 Class 2: 8W 011 Class 3: 5W 100 Class 4: 2W 101 Class 5: 0.8 W PCS 1900 Associated Radio Capability (4 bit field) This field indicates whether DCS 1900 band is supported and its associated radio capability. Bits 321 001 Class 1: 1W 010 Class 2: 0.25 W 011 Class 3: 2 W handled as class 1 UMTS FDD Radio Access Technology Capability (1 bit field) 0 UMTS FDD not supported 1 UMTS FDD supported UMTS 3.84 Mcps TDD Radio Access Technology Capability (1 bit field) 0 UMTS 3.84 Mcps TDD not supported 1 UMTS 3.84 Mcps TDD supported Not implemented in the BSS. CDMA 2000 Radio Access Technology Capability (1 bit field) 0 CDMA2000 not supported 1 CDMA2000 supported Not implemented in the BSS. DTM GPRS Multi Slot Sub-Class (2 bit field) 00 Unused. If received, the network shall interpret this as 01 01 Sub-Class 5 supported 10 Sub-Class 9 supported 11 Multislot class 11 supported Single Slot DTM (1 bit field) This field indicates whether the MS supports single slot DTM operation (see 3GPP TS 43.055 [87]). It is coded as follows: Bit 1 0 Single Slot DTM not supported 1 Single Slot DTM supported Not checked by the BSS. ED EVOLIUM 05 RELEASED LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CLASSMARK CHANGE 3BK 11203 0138 DSZZA 126/639

0138_05.doc 15/02/2008

DTM EGPRS Multi Slot Sub-Class (2 bit field) This field indicates the EGPRS DTM capabilities of the MS. The DTM EGPRS Multi Slot Sub-Class is independent from the Multi Slot Capabilities field. This field shall be included only if the mobile station supports EGPRS DTM. This field is coded as the DTM GPRS Multi Slot Sub-Class field. Single Band Support (4 bit field): This field is sent in case of UMTS to GSM handover if the MS supports UMTS and one and only one GSM band with the exception of R-GSM. It indicates the GSM band supported by the MS. Bits 4321 0000 E-GSM is supported 0001 P-GSM is supported 0010 DCS1800 is supported 0011 GSM450 is supported 0100 GSM480 is supported 0101 GSM850 is supported 0110 PCS1900 is supported Not checked by the BSS. GSM Band (4 bit field) Bits 4321 0000 E-GSM is supported 0001 P-GSM is supported 0010 GSM 1800 is supported 0011 GSM 450 is supported 0100 GSM 480 is supported 0101 GSM 850 is supported 0110 GSM 1900 is supported 0111 GSM 700 is supported All other values are reserved for future use. Note When this field is received, the associated RF power capability is found in Classmark 1 or 2. Not checked by the BSS. GSM 750 Associated Radio Capability (4 bit field) See the semantic rule for the sending of this field. This field indicates whether GSM 750 band is supported and its associated radio capability. The radio capability contains the binary coding of the power class associated with the GSM 700 band (see 3GPP TS 45.005 ). Note the coding of the power class for GSM 750 in GSM 700 Associated Radio Capability is different to that used in the Mobile Station Classmark 1 and Mobile Station Classmark 2 information elements.

Not checked by the BSS. UMTS 1.28 Mcps TDD Radio Access Technology Capability (1 bit field) Bit 1 0 UMTS 1.28 Mcps TDD not supported 1 UMTS 1.28 Mcps TDD supported. Not checked by the BSS. GERAN Feature Package 1 (1 bit field) This field indicates whether the MS supports the GERAN Feature Package 1 (see 3GPP TS 44.060). It is coded as follows: Bit 1 ED EVOLIUM 05 RELEASED LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CLASSMARK CHANGE 3BK 11203 0138 DSZZA 127/639

0138_05.doc 15/02/2008

0 1 Note

GERAN feature package 1 not supported. GERAN feature package 1 supported.

GERAN Package 1 Feature corresponds to the support of {Extended UL TBF release, NACC, Packet (P)SI status} features.

Extended DTM GPRS Multi Slot Class (2 bit field) This field indicates the extended DTM GPRS multislot capabilities of the MS and shall be interpreted in conjunction with the DTM GPRS Multi Slot Class field. It is coded as follows, where DGMSC denotes the DTM GPRS Multi Slot Class field: DGMSC Bit 2 1 Bit 2 1 00 00 Unused. If received, it shall be interpreted as 01 00 00 01 Unused. If received, it shall be interpreted as 01 00 00 10 Unused. If received, it shall be interpreted as 01 00 00 11 Unused. If received, it shall be interpreted as 01 00 01 00 Multislot class 5 supported 01 01 Multislot class 6 supported 01 10 Unused. If received, it shall be interpreted as 01 00 01 11 Unused. If received, it shall be interpreted as 01 00 10 00 Multislot class 9 supported 10 01 Multislot class 10 supported 10 10 Unused. If received, it shall be interpreted as 10 00 10 11 Unused. If received, it shall be interpreted as 10 00 11 00 Multislot class 11 supported 11 01 Unused. If received, it shall be interpreted as 11 00 11 10 Unused. If received, it shall be interpreted as 11 00 11 11 Unused. If received, it shall be interpreted as 11 00 The presence of this field indicates that the MS supports combined fullrate and halfrate GPRS channels in the downlink.When this field is not present, the MS supports the multislot class indicated by the DTM GPRS Multi Slot Class field. Not checked by the BSS. Extended DTM EGPRS Multi Slot Class (2 bit field) This field is not considered when the DTM EGPRS Multi Slot Class field is not included. This field indicates the extended DTM EGPRS multislot capabilities of the MS and shall be interpreted in conjunction with the DTM EGPRS Multi Slot Class field. This field is coded as the Extended DTM GPRS Multi Slot Class field. The presence of this field indicates that the MS supports combined fullrate and halfrate GPRS channels in the downlink. When this field is not present, the MS supports the multislot class indicated by the DTM EGPRS Multi Slot Class field. Not checked by the BSS. High Multislot Capability (2 bit field) This field indicates the support of multislot classes 30 to 45, see 3GPP TS 45.002. The High Multislot Capability is individually combined with each multislot class field sent by the MS (the possible multislot class fields are: GPRS multislot class, EGPRS multislot class) to extend the related multislot class with the rule described in the MS Radio Access Capability IE. Not checked by the BSS. GERAN Iu Mode Capabilities This field indicates if the mobile station supports GERAN Iu mode. Furthermore, it indicates the GERAN Iu mode capabilities of the mobile station. The field shall be included if the mobile station supports GERAN Iu mode. If the field is not present, the mobile station does not support GERAN Iu mode. Not checked by the BSS. FLO Iu Capability (1 bit field) ED EVOLIUM 05 RELEASED LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CLASSMARK CHANGE 3BK 11203 0138 DSZZA 128/639

0138_05.doc 15/02/2008

If this parameter is not present, the value '0' shall be assumed by the receiver. 0 FLO in GERAN Iu mode not supported 1 FLO in GERAN Iu mode supported Not checked by the BSS. GERAN Feature Package 2 (1 bit field) This field indicates the MS support of the GERAN Feature Package 2. The GERAN Feature Package 2 includes Enhanced Power Control (EPC) (see 3GPP TS 45.008). 0 GERAN feature package 2 not supported. 1 GERAN feature package 2 supported. Not checked by the BSS. GMSK Multislot Power Profile (2 bit field) This field indicates the GMSK multislot power capability GMSK_MULTISLOT_POWER_PROFILE as described in 3GPP TS 45.005. Bits 21 00 GMSK_MULTISLOT_POWER_PROFILE 0 01 GMSK_MULTISLOT_POWER_PROFILE 1 10 GMSK_MULTISLOT_POWER_PROFILE 2 11 GMSK_MULTISLOT_POWER_PROFILE 3 Not checked by the BSS. 8-PSK Multislot Power Profile (2 bit field) This field indicates the 8-PSK multislot power capability parameter 8-PSK_MULTISLOT_POWER_PROFILE as described in 3GPP TS 45.005. If the MS does not support 8-PSK in the uplink, then it shall set this field to 0 0. Bits 21 00 8-PSK_MULTISLOT_POWER_PROFILE 0 01 8-PSK_MULTISLOT_POWER_PROFILE 1 10 8-PSK_MULTISLOT_POWER_PROFILE 2 11 8-PSK_MULTISLOT_POWER_PROFILE 3 Not checked by the BSS. T-GSM 400 Bands Supported (2 bit field) See the semantic rule for the sending of this field. Bits 21 01 T-GSM 380 supported, T-GSM 410 not supported 10 T-GSM 410 supported, T-GSM 380 not supported 11 T-GSM 410 supported, T-GSM 380 supported Not checked by the BSS. T-GSM 400 Associated Radio Capability (4 bit field) If either T-GSM 410 or T-GSM 380 or both is supported, the T-GSM 400 Associated Radio Capability field indicates the radio capability for T-GSM 410 and/or T-GSM 380. The radio capability contains the binary coding of the power class associated with the band indicated in T-GSM 400 Bands Supported bits (see 3GPP TS 45.005 [33]). NOTE: The coding of the power class for T-GSM 410 and T-GSM 380 in T-GSM 400 Associated Radio Capability is different to that used in the Mobile Station Classmark 1 and Mobile Station Classmark 2 information elements. Not checked by the BSS. LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CLASSMARK CHANGE 3BK 11203 0138 DSZZA 129/639 parameter

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

T-GSM 900 Associated Radio Capability (4 bit field) See the semantic rule for the sending of this field. This field indicates whether T-GSM 900 band is supported and its associated radio capability. The radio capability contains the binary coding of the power class associated with the T-GSM 900 band (see 3GPP TS 45.005 [33]). Note: the coding of the power class for T-GSM 900 in T-GSM 900 Associated Radio Capability is different to that used in the Mobile Station Classmark 1 and Mobile Station Classmark 2 information elements. Not checked by the BSS. Downlink Advanced Receiver Performance (2 bit field) This field indicates Downlink Advanced Receiver Performance capabilities of the MS (see 3GPP TS 45.005 [33]). Bits 21 00 Downlink Advanced Receiver Performance not supported 01 Downlink Advanced Receiver Performance phase I supported Other values shall not be used by the MS. If other values are received by the network, they shall be interpreted as 01. Not checked by the BSS. DTM Enhancements Capability (1 bit field) This field indicates whether the mobile station supports enhanced DTM CS establishment and enhanced DTM CS release or not. It is coded as follows: 0 The mobile station does not support enhanced DTM CS establishment and enhanced DTM CS release procedures. 1 The mobile station supports enhanced DTM CS establishment and enhanced DTM CS release procedures. Not checked by the BSS. DTM GPRS High Multi Slot Class (3 bit field) This field indicates the DTM GPRS multislot capabilities of the MS. It is coded as follows: Bit 321 000 001 010 011 100 101 110 111

Unused. If received, the network shall interpret this as 0 0 1 Multislot class 31 or 36 supported Multislot class 32 or 37 supported Multislot class 33 or 38 supported Multislot class 41 supported Multislot class 42 supported Multislot class 43 supported Multislot class 44 supported

The presence of this field indicates that the MS supports the DTM extension to high multislot classes. When this field is not present, the MS supports the DTM multislot class indicated by the DTM GPRS Multi Slot Class field. The values '0 0 1', '0 1 0' and '0 1 1' shall be interpreted as indicating DTM GPRS multislot class 36, 37 or 38 respectively if the Offset required field indicates that the offset t0 is required; in all other cases those codepoints shall be interpreted as indicating DTM GPRS multislot class 31, 32 or 33 respectively.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CLASSMARK CHANGE 3BK 11203 0138 DSZZA 130/639

Offset required (1 bit field) This field indicates whether the GPRS multislot class of the mobile station is such that the Timing Advance offset t0 is required (see 3GPP TS 45.002). It is coded as follows: 0 The mobile station does not require the offset 1 The mobile station requires the offset DTM EGPRS High Multi Slot Class (3 bit field) This field indicates the DTM EGPRS multislot capabilities of the MS. This field may be included only if the mobile station supports EGPRS DTM. This field is coded as the DTM GPRS High Multi Slot Class field. When this field is not present, the MS supports the DTM multislot class indicated by the DTM EGPRS Multi Slot Class field. The values '0 0 1', '0 1 0' and '0 1 1' shall be interpreted as indicating DTM EGPRS multislot class 36, 37 or 38 respectively if the Offset required field indicates that the Timing Advance offset t0 is required; in all other cases those codepoints shall be interpreted as indicating DTM EGPRS multislot class 31, 32 or 33 respectively. Repeated ACCH Capability (1 bit field) This field indicates whether the MS supports Repeated SACCH and Repeated Downlink FACCH (see 3GPP TS 44.006 [76]). It is coded as follows: 0 The mobile station does not support Repeated SACCH 1 The mobile station supports Repeated SACCH and Repeated Downlink FACCH Not checked by the BSS. PARAMETER ORIGIN - ACTION ON PARAMETER The MS classmark 3 is sent if O&M flag is set.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CLASSMARK CHANGE 3BK 11203 0138 DSZZA 131/639

6.12 CLASSMARK ENQUIRY


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION RADIO FACCH/SDCCH 44.018

CLASSMARK ENQUIRY ABIS Transparent NA A

This message is sent on the main DCCH by the BSS to the Mobile Station to the BSS to request Classmark information. From BSC INFORMATION ELEMENT NAME To MS TYPE M V O TLV COMMENT LENGTH (byte) 2 3 5 TIMER Classmark handling (ref. [9])

INFORMATION ELEMENT LIST

Header Classmark Enquiry Mask

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. ABNORMAL SITUATION

6.12.1 GENERAL DESCRIPTION 8 0 0 7 0 0 6 0 0 5 0 1 4 0 0 3 1 0 2 1 1 1 0 1

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CLASSMARK ENQUIRY 3BK 11203 0138 DSZZA 132/639

6.12.2 CLASSMARK ENQUIRY MASK TYPE: O DEFINITION Defines the information capabilities to be returned to the network. The bit mask defines the specific information to be returned, such as UE capability and/or information about UMTS RAB preconfiguration versions and/or UMTS security information and/or UTRAN specific information and/or CDMA2000 capability and/or requests the sending of the CLASSMARK CHANGE or GERAN IU MODE CLASSMARK CHANGE message. BIT DESCRIPTION The Classmark Enquiry Mask is a type 4 information element with 3 octets length. 8 7 6 5 4 3 2 1 Classmark Enquiry Mask IEI Length = 1 Classmark Enquiry Mask value part Bit 8: 0 CLASSMARK CHANGE message is requested 1 CLASSMARK CHANGE message is not requested Bits 7-5 000 UTRAN CLASSMARK CHANGE message requested 111 UTRAN CLASSMARK CHANGE message not requested. All other values if received shall be interpreted as 000 Bit 4: 0 CDMA2000 CLASSMARK CHANGE message requested 1 CDMA2000 CLASSMARK CHANGE message not requested. Always set to 1. Bit 3: 0 GERAN IU MODE CLASSMARK CHANGE message requested 1 GERAN IU MODE CLASSMARK CHANGE message not requested. Always set to 1. Bits 2 - 1: spare(0).

octet 1 octet 2 octet 3

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CLASSMARK ENQUIRY 3BK 11203 0138 DSZZA 133/639

6.13 CM RE-ESTABLISHMENT REQUEST


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION RADIO SDCCH/FACCH 24.008

CM RE-ESTABLISHMENT REQUEST ABIS BTS Transparent NA A

The BSC is only non transparent to the classmark information. From: MS INFORMATION ELEMENT NAME To: BSC TYPE COMMENT LENGTH (byte) 2 4 2-9 6 22 TIMER T3101

INFORMATION ELEMENT LIST

Header Ciphering key sequence number spare Mobile Station Classmark 2 Mobile Identity Location Area Identification

M V M V M LV M LV C TV

(1)

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT ABNORMAL SITUATION

SPECIF DOC. REF.

Radio Link Establishment (ref. [2])

T3101 is stopped on reception of this message. means one half octet. (1) IE is present if TMSI is used as MS identity.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CM RE-ESTABLISHMENT REQUEST 3BK 11203 0138 DSZZA 134/639

6.13.1 GENERAL DESCRIPTION Phase 1 MS 8 0 0 Ciphering key and spare half octet Mobile Station Classmark 2 0 7 N(SD) 0 Revision level 0 0 6 0 1 5 0 0 4 0 1 3 1 0 2 0 0 1

Key Sequence

Identity

Mobile

ID digit 1 ...

Encryption RF power Algorithm Capability 0 0 SM. Frequency capability cap Length of Mobile Identity contents OEI ID digit 2 ID digit p MCC Digit 1 MNC Digit 1 MCC Digit 3 ... Type of ID

Length = 2

ID digit 3

ID digit p+1 MNC Digit 3 (Note) MNC Digit 2 LAC MCC Digit 2

Location Area Identification

LAC (continued) Note 3 digits MNC is supported. Note that in case where only two digits MNC is used, the field MNC Digit 3 shall be filled in with 1111.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CM RE-ESTABLISHMENT REQUEST 3BK 11203 0138 DSZZA 135/639

Phase 2 MS accessing a Release 98 or older network 8 0 Ciphering key and spare half octet Mobile Station Classmark 2 0 0 7 0 6 0

5 0 0

4 0 1

3 1 0

2 0 0

N(SD) 0

Key Sequence

0 spare 0 spare CM3

Revision ESA5/1 RF power level IND Capability PS SS Screen. SM. 0 Capa. Indicator cap VBS VGCS 0 LCS UCS2 SoLSA CMSP A5/3 spare VA CAP Length of Mobile Identity contents ID digit 1 ... ID digit 3 OEI ID digit 2 ID digit p ...

Length of MS classmark 2 contents

FC A5/2

Identity

Mobile

Type of ID

Location Area Identification

MNC Digit 3 (Note) MNC Digit 2 LAC

MCC Digit 2

ID digit p+1

MCC Digit 1 MNC Digit 1

MCC Digit 3

LAC (continued) Note 3 digits MNC is supported. Note that in case where only two digits MNC is used, the field MNC Digit 3 shall be filled in with 1111.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CM RE-ESTABLISHMENT REQUEST 3BK 11203 0138 DSZZA 136/639

Phase 2 MS accessing a Release 99 or newer network 8 0 Ciphering key and spare half octet Mobile Station Classmark 2 7 0 0 6 0 0

5 0 0

4 1 0 0

3 0 1

2 0 0

N(SD) or 0

Key Sequence

0 spare 0 spare CM3

Revision ESA5/1 RF power level IND Capability PS SS Screen. SM. 0 Capa. Indicator cap VBS VGCS 0 LCS UCS2 SoLSA CMSP A5/3 spare VA CAP Length of Mobile Identity contents ID digit 1 ... ID digit 3 OEI ID digit 2 ID digit p ...

Length of MS classmark 2 contents

FC A5/2

Identity

Mobile

Type of ID

Location Area Identification

MNC Digit 3 (Note) MNC Digit 2 LAC

MCC Digit 2

ID digit p+1

MCC Digit 1 MNC Digit 1

MCC Digit 3

LAC (continued) Note 3 digits MNC is supported. Note that in case where only two digits MNC is used, the field MNC Digit 3 shall be filled in with 1111.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CM RE-ESTABLISHMENT REQUEST 3BK 11203 0138 DSZZA 137/639

6.13.2 CIPHERING KEY SEQUENCE NUMBER TYPE: M Identification of the ciphering key Kc which is stored in the Mobile Station without invoking the authentication procedure. BIT DESCRIPTION 0 spare 8 7 6 5 4 3 2 1 DEFINITION

Bit 4 is spare bit. Bits 5 to 8 are spare. Key sequence: value 7

0 spare

0 spare

0 spare

key sequence

SUB PARAMETER DEFINITION

values 0 to 6 Possible values for ciphering key sequence number. No key is available (MS to network) Reserved (network to MS).

PARAMETER ORIGIN - ACTION ON PARAMETER BSC is transparent on this parameter.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CM RE-ESTABLISHMENT REQUEST 3BK 11203 0138 DSZZA 138/639

6.13.3 MS CLASSMARK 2 - GSM Phase 1 TYPE: M DEFINITION Defines certain attributes of the Mobile Station equipment in use on a particular transaction. BIT DESCRIPTION 8 7 Revision level 0 6 5 Length 4 3 2 1 1 2 3

Encryption Algorithm 0 SM. cap

RF power Capability Frequency capability

Bits 8-5 of octet 3 spare set to 0. Octet 2 Bits Revision level

SUB PARAMETER DEFINITION 876 000 54 00 321 000 001 010 011 100 000 001 000 001 010 Reserved for phase 1. All other values reserved algorithm A5/1 All other values reserved. class 1 class 2 class 3 class 4 class 5 All other values reserved class 1 class 2 All other values reserved class 1 class 2 class 3 All other values reserved

Bits Encryption Algorithm Bits RF Power capability GSM900

DCS1800 DCS1900

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CM RE-ESTABLISHMENT REQUEST 3BK 11203 0138 DSZZA 139/639

Octet 3 Bit SM Capability Bits FC Frequency Capability

4 0 1 321 000

short message capability not present short message capability present Band no 0 Other values reserved.

PARAMETER ORIGIN - ACTION ON PARAMETER This is the MS classmark 2 as sent by a phase 1 MS. The BSC takes this information in order to have the MS power capability for the power control algorithm. Note: The BSC will decode the two octets of this IE value as if they were the two first octets of a phase 2 MS classmark 2 IE value.

6.13.4 MS CLASSMARK 2 - GSM Phase 2 TYPE: M DEFINITION Defines certain attributes of the Mobile Station equipment in use on a particular transaction. BIT DESCRIPTION 8 0 spare 0 spare CM3 7 6 5 Length 4 3 2 1 1 2 FC A5/2 3 4

Revision ES level IND PS SS Screen. Capa. Indicator 0 LCS UCS2 spare VA CAP

A5/1 SM. cap

RF power Capability VBS VGCS CMSP A5/3

SoLSA

Bit 8 of octet 2 spare set to 0, Bits 8 of octet 3 spare set to 0, SUB PARAMETER DEFINITION Octet 2: Bits Revision level 76 00 01 10 5 0 1 Bit A5/1 4 0 1 05 RELEASED

Bit ES-IND

Reserved for phase 1 Used by phase 2 MS Used by mobile stations supporting R99 or later versions of the protocol All other value reserved Controlled Early Classmark Sending option not implemented. Controlled Early Classmark Sending option implemented. algorithm A5/1 available algorithm A5/1 not available. LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CM RE-ESTABLISHMENT REQUEST 3BK 11203 0138 DSZZA 140/639

ED EVOLIUM

0138_05.doc 15/02/2008

Bits RF Power capability P-GSM, GSM850 and E-GSM

321 000 001 010 011 100 000 001 010 000 001 010 class 1 class 2 class 3 class 4 class 5 All other values reserved class 1 class 2 class 3, handled as class 1 All other values reserved class 1 class 2 class 3, handled as class 1 All other values reserved

DCS1800

DCS1900

Octet 3: Bit PS Capability Bits SS Screening Indicator

Bit SM Capability Bit VBS Voice Broadcast Service Bit VGCS Voice Call Service Bit FC Capability

7 0 1 65 00 01 10 11 4 0 1 3 0

PS capability not present PS capability present Defined in GSM 04.80 Defined in GSM 04.80 Defined in GSM 04.80 Defined in GSM 04.80 MS does not support mobile terminated point to point SMS. MS supports mobile terminated point to point SMS. no VBS capability or no notifications wanted

Group

1 VBS capability and notifications wanted Not implemented in the BSS. 2 0 no VGCS capability or no notifications wanted 1 1 0 1 0 The MS does not support the extension band G1 in addition to the primary GSM band. The MS does support the extension band G1. Reserved for future use VGCS capability and notifications wanted

Frequency GSM900

GSM850, DCS1800, DCS1900

Note: only FC is checked in this release and only in GSM900 configuration.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CM RE-ESTABLISHMENT REQUEST 3BK 11203 0138 DSZZA 141/639

Octet 4 Bit CM3 Classmark 3 Bit LCS VA capability

8 0 1 6 0

No additional MS capability Additional MS capabilities are described in the MS Classmark 3 information element.

Bit UCS2 treatment

Bit SoLSA Bit CMSP: CM Service Prompt

Bit A5/3 algorithm supported Bit A5/2 algorithm supported

LCS value added location request notification capability not supported 1 LCS value added location request notification capability supported Not implemented in the BSS. 5 0 the ME has a preference for the default alphabet (defined in GSM 03.38) over UCS2 1 the ME has no preference between the use of the default alphabet and the use of UCS2. Not implemented in the BSS. 4 0 The ME does not support SoLSA 1 The ME supports SoLSA. 3 0 "Network initiated MO CM connection request" not supported 1 "Network initiated MO CM connection request" supported for at least one CM protocol. Not implemented in the BSS. 2 0 A5/3 not available 1 A5/3 available 1 0 A5/2 not available 1 A5/2 available Note: only A5/2 is checked in this release.

PARAMETER ORIGIN - ACTION ON PARAMETER The BSC takes this information in order to have the MS power capability for the power control algorithm, the MS frequency capability and the MS ciphering capability. Additional mobile info can be obtained by invoking the classmark interrogation procedure.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CM RE-ESTABLISHMENT REQUEST 3BK 11203 0138 DSZZA 142/639

6.13.5 MOBILE IDENTITY TYPE: M DEFINITION To provide either the IMSI, the TMSI or the IMEI. IMEISV is not used in CM SERVICE REQUEST. Note IMSI 15 digits TMSI = 4 octets IMEI = 15 digits IMEISV = 16 digits BIT DESCRIPTION 8 7 Length of Mobile Identity contents OEI 6 5 4 3 2 1

ID digit 1 ID digit 3 :

ID digit 2 :

Type of ID

ID digit p+1 SUB PARAMETER DEFINITION Type of ID: 001 010 011 100 000 IMSI IMEI IMEISV TMSI No identity other values reserved

ID digit P

Not used Not used

OEI: Odd Even Indicator value 0: 1:

even number of identity digits (even for TMSI) odd number of digits

Filled digit :1 1 1 1

Octet 3 For the IMSI and the IMEI this field is coded using BCD coding. If the number of identify digits is even then bits 5 to 8 of the last octet shall be filled with an end mark coded as '1111'. If the mobile identity is the TMSI then bits 5 to 8 of octet 2 is coded as '1111' and bit 8 of octet 3 is the most significant bit, and bit 1 of the last octet is the least significant bit. PARAMETER ORIGIN - ACTION ON PARAMETER

BSC transparent.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CM RE-ESTABLISHMENT REQUEST 3BK 11203 0138 DSZZA 143/639

6.13.6 LOCATION AREA IDENTIFICATION TYPE: C DEFINITION To provide unambiguous identification of previous Location Area of the Mobile Station within the area covered by GSM system. BIT DESCRIPTION 8 0 7 0 6 0 5 1 4 0 3 0 2 1 1 1

MCC Digit 2 MNC Digit 3 MNC Digit 2

MCC Digit 1 MCC Digit 3 MNC Digit 1

LAC (continued)

LAC

Note

3 digits MNC is supported. Note that in case where only two digits MNC is used, the field MNC Digit 3 shall be filled in with 1111.

SUB PARAMETER DEFINITION MCC Mobile Country Code (See CCITT E.212). MNC Mobile Network Code (BCD). LAC Location Area Code (Coding scheme chosen by administration). PARAMETER ORIGIN - ACTION ON PARAMETER BSC Transparent.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE CM RE-ESTABLISHMENT REQUEST 3BK 11203 0138 DSZZA 144/639

6.14 CM SERVICE REQUEST


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION RADIO SDCCH/FACCH 24.008

CM SERVICE REQUEST ABIS BTS Transparent NA A

The BSC is only non transparent to the classmark information. From: MS INFORMATION ELEMENT NAME To: BSC TYPE COMMEN T LENGTH (byte) 2 4 2-9 1 10-17 TIMER

INFORMATION ELEMENT LIST

Header CM Service type Ciphering key sequence number Mobile Station Classmark 2 Mobile Identity Priority Level

M V M V M LV M LV O TV

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT ABNORMAL SITUATION

T3101

SPECIF DOC. REF.

Radio Link Establishment (ref. [2])

T3101 is stopped on reception of this message. means one half octet.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DATA INDICATION 3BK 11203 0138 DSZZA 145/639

6.14.1 GENERAL DESCRIPTION Phase 1 MS 8 0 0 Ciphering key and CM service type Mobile Station Classmark 2 0 7 N(SD) 0 6 0 1 5 0 0 4 0 0 3 1 1 2 0 0 1

Key Sequence Revision level 0 Length = 2

Service Type

Identity

Mobile

ID digit 1 ...

Encryption RF power Algorithm Capability 0 0 SM. Frequency capability cap Length of Mobile Identity contents OEI ID digit 2 ID digit p ... Type of ID

ID digit 3

ID digit p+1

Phase 2 MS 8 0 Ciphering key and CM service type Mobile Station Classmark 2 0 0 0 spare 0 spare CM3 7 N(SD) 0 6 0 1 5 0 0 4 0 0 3 1 1 2 0 0 1

Key Sequence Revision ESlevel IND PS SS Screen. Capa. Indicator 0 spare A5/1 SM. cap

Service Type RF power Capability VGCS A5/3

Length of MS classmark 2 contents 0 VBS

FC A5/2

Identity

Mobile

ID digit 1 ...

LCS UCS2 SoLSA CMSP VA CAP Length of Mobile Identity contents OEI

ID digit 3

ID digit 2 ...

Type of ID

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DATA INDICATION 3BK 11203 0138 DSZZA 146/639

ID digit p+1 Phase 2+ MS accessing a Release 98 or older network

ID digit p

8 0 Ciphering key and CM service type Mobile Station Classmark 2 0 0 0 spare 0 spare CM3

7 N(SD) 0

6 0 1

5 0 0

4 0 0

3 1 1

2 0 0

Key Sequence Revision ESlevel IND PS SS Screen. Capa. Indicator 0 spare A5/1 SM. cap

Service Type RF power Capability VGCS A5/3

Length of MS classmark 2 contents 0 VBS

FC A5/2

Identity Priority Level 1

Mobile

ID digit 1 ...

LCS UCS2 SoLSA CMSP VA CAP Length of Mobile Identity contents OEI

ID digit 3

ID digit 2 ID digit p ...

Type of ID

ID digit p+1 0 0 0 0

call priority

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DATA INDICATION 3BK 11203 0138 DSZZA 147/639

Phase 2+ MS accessing a Release 99 or newer network 8 0 Ciphering key and CM service type Mobile Station Classmark 2 7 0 6 1 0 5 0 0 4 0 0 3 1 1 2 0 0 1

N(SD) or 0

0 0 spare 0 spare CM3

Key Sequence Revision ESlevel IND PS SS Screen. Capa. Indicator 0 spare A5/1 SM. cap

Service Type RF power Capability VGCS A5/3

Length of MS classmark 2 contents 0 VBS

FC A5/2

Identity Priority Level 1

Mobile

ID digit 1 ...

LCS UCS2 SoLSA CMSP VA CAP Length of Mobile Identity contents OEI

ID digit 3

ID digit 2 ID digit p ...

Type of ID

ID digit p+1 0 0 0 0

call priority

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DATA INDICATION 3BK 11203 0138 DSZZA 148/639

6.14.2 CM SERVICE TYPE TYPE: M DEFINITION To specify which service is requested from the network. BIT DESCRIPTION 8 7 6 5 4 3 2 1

Service type

SUB PARAMETER DEFINITION Phase 1: 0 0 0 1: 0 0 1 0: 0 1 0 0: 1 0 0 0: Mobile originated call establishment or packet mode connection establishment Emergency call establishment Short message service Supplementary service activation other values are reserved.

Phase 2: 0 0 0 1: Mobile originated call establishment or packet mode connection establishment 0 0 1 0: Emergency call establishment 0 1 0 0: Short message service 1 0 0 0: Supplementary service activation 1 0 0 1: Voice group call establishment 1 0 1 0: Voice broadcast call establishment 1 0 1 1: Location Services PARAMETER ORIGIN - ACTION ON PARAMETER This parameter is transparent to the BSC and the BTS.

not implemented

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DATA INDICATION 3BK 11203 0138 DSZZA 149/639

6.14.3 CIPHERING KEY SEQUENCE NUMBER TYPE: M DEFINITION Identification of the ciphering key Kc which is stored in the Mobile Station without invoking the authentication procedure. BIT DESCRIPTION 0 spare 8 7 6 5 4 3 2 1

key sequence

Bit 8 is spare bit. Bit 5, 6, 7: Ciphering key sequence number information. SUB PARAMETER DEFINITION Key sequence: value 0 to 6: value 7: Possible values for ciphering key sequence number. no key is available (MS to network) Reserved (network to MS).

PARAMETER ORIGIN - ACTION ON PARAMETER BSC is transparent on this parameter.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DATA INDICATION 3BK 11203 0138 DSZZA 150/639

6.14.4 MS CLASSMARK 2 - GSM Phase 1 TYPE: M DEFINITION Defines certain attributes of the Mobile Station equipment in use on a particular transaction. BIT DESCRIPTION 8 7 Revision level 0 6 5 Length 4 3 2 1 1 2 3

Encryption Algorithm 0 SM. cap

RF power Capability Frequency capability

Bits 8-5 of octet 3 spare set to 0

SUB PARAMETER DEFINITION Octet 2 Bits Revision level Bits Encryption Algorithm Bits RF Power capability GSM900 876 000 54 00 321 000 001 010 011 100 000 001 000 001 010

Reserved for phase 1. All other values reserved algorithm A5/1 All other values reserved. class 1 class 2 class 3 class 4 class 5 All other values reserved class 1 class 2 All other values reserved class 1 class 2 class 3 All other values reserved

DCS1800 DCS1900

Octet 3 Bit SM Capability Bits FC Frequency Capability

4 0 1 321 000

short message capability not present short message capability present Band no 0 Other values reserved.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DATA INDICATION 3BK 11203 0138 DSZZA 151/639

PARAMETER ORIGIN - ACTION ON PARAMETER This is the MS classmark 2 as sent by a phase 1 MS. The BSC takes this information in order to have the MS power capability for the power control algorithm. Note: The BSC will decode the two octets of this IE value as if they were the two first octets of a phase 2 MS classmark 2 IE value.

6.14.5 MS CLASSMARK 2 - GSM Phase 2 TYPE: M DEFINITION Defines certain attributes of the Mobile Station equipment in use on a particular transaction. BIT DESCRIPTION 8 0 spare 0 spare CM3 7 6 5 Length 4 3 2 RF power Capability VBS CMSP VGCS A5/3 1 1 2 FC A5/2 3 4

Revision ES level IND PS SS Screen. Capa. Indicator 0 spare LCS VA CAP

A5/1 SM. cap

UCS2

SoLSA

Bit 8 of octet 2 spare set to 0 Bits 8 of octet 3 spare set to 0 SUB PARAMETER DEFINITION Octet 2: Bits Revision level 76 00 01 10 5 0 1 Bit A5/1 Bits RF Power capability P-GSM, GSM850 and E-GSM 4 0 1 321 000 001 010

Bit ES-IND

Reserved for phase 1 Used by phase 2 MS Used by mobile stations supporting R99 or later versions of the protocol All other value reserved Controlled Early Classmark Sending option not implemented. Controlled Early Classmark Sending option implemented. algorithm A5/1 available algorithm A5/1 not available. class 1 class 2 class 3

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DATA INDICATION 3BK 11203 0138 DSZZA 152/639

011 100 DCS1800 000 001 010 000 001 010

DCS1900

class 4 class 5 All other values reserved class 1 class 2 class 3, handled as class 1 All other values reserved class 1 class 2 class 3, handled as class 1 All other values reserved

Octet 3: Bit PS Capability Bits SS Screening Indicator

Bit SM Capability Bit VBS Voice Broadcast Service Bit VGCS Voice Call Service Bit FC Capability

7 0 1 65 00 01 10 11 4 0 1 3 0

PS capability not present PS capability present Defined in GSM 04.80 Defined in GSM 04.80 Defined in GSM 04.80 Defined in GSM 04.80 MS does not support mobile terminated point to point SMS. MS supports mobile terminated point to point SMS. no VBS capability or no notifications wanted

Group

1 VBS capability and notifications wanted Not implemented in the BSS. 2 0 no VGCS capability or no notifications wanted 1 1 0 1 0 The MS does not support the extension band G1 in addition to the primary GSM band. The MS does support the extension band G1. Reserved for future use VGCS capability and notifications wanted

Frequency GSM900

GSM850, DCS1800, DCS1900

Note: only FC is checked in this release and only in GSM900 configuration.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DATA INDICATION 3BK 11203 0138 DSZZA 153/639

Octet 4 Bit CM3 Classmark 3 Bit LCS VA capability

8 0 1 6 0

No additional MS capability Additional MS capabilities are described in the MS Classmark 3 information element.

Bit UCS2 treatment

Bit SoLSA Bit CMSP: CM Service Prompt

Bit A5/3 algorithm supported Bit A5/2 algorithm supported

LCS value added location request notification capability not supported 1 LCS value added location request notification capability supported Not implemented in the BSS. 5 0 the ME has a preference for the default alphabet (defined in GSM 03.38) over UCS2 1 the ME has no preference between the use of the default alphabet and the use of UCS2. Not implemented in the BSS. 4 0 The ME does not support SoLSA 1 The ME supports SoLSA. 3 0 "Network initiated MO CM connection request" not supported 1 "Network initiated MO CM connection request" supported for at least one CM protocol. Not implemented in the BSS. 2 0 A5/3 not available 1 A5/3 available 1 0 A5/2 not available 1 A5/2 available Note: only A5/2 is checked in this release.

PARAMETER ORIGIN - ACTION ON PARAMETER The BSC takes this information in order to have the MS power capability for the power control algorithm, the MS frequency capability and the MS ciphering capability. Additional mobile info can be obtained by invoking the classmark interrogation procedure.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DATA INDICATION 3BK 11203 0138 DSZZA 154/639

6.14.6 MOBILE IDENTITY TYPE: M DEFINITION To provide either the IMSI, the TMSI or the IMEI. IMEISV is not used in CM SERVICE REQUEST. Note IMSI 15 digits TMSI = 4 octets IMEI = 15 digits BIT DESCRIPTION 8 7 6 5 4 3 2 1

ID digit 1 ID digit 3 :

Length of Mobile Identity contents OEI

ID digit 2 :

Type of ID

ID digit p+1 SUB PARAMETER DEFINITION Type of ID: 001 IMSI 010 IMEI 011 IMEISV 100 TMSI 000 No identity other values reserved

ID digit P

Not used Not used

OEI: Odd Even Indicator value 0: even number of identity digits (even for TMSI) 1: odd number of digits

Filled digit :1 1 1 1 Octet 2 For the IMSI and the IMEI this field is coded using BCD coding. If the number of identify digits is even then bits 5 to 8 of the last octet shall be filled with an end mark coded as '1111'. If the mobile identity is the TMSI then bits 5 to 8 of octet 2 is coded as '1111' and bit 8 of octet 3 is the most significant bit, and bit 1 of the last octet is the least significant bit. PARAMETER ORIGIN - ACTION ON PARAMETER BSC transparent.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DATA INDICATION 3BK 11203 0138 DSZZA 155/639

6.14.7 PRIORITY LEVEL TYPE: O DEFINITION May be included by MS supporting eMLPP to indicate the requested priority. BIT DESCRIPTION 8 1 7 0 6 0 5 0 4 spare 0 call priority 3 2 1

Priority Level IEI

SUB PARAMETER DEFINITION call priority: 000 001 010 011 100 101 110 111 no priority applied call priority level 4 call priority level 3 call priority level 2 call priority level 1 call priority level 0 call priority level B call priority level A

PARAMETER ORIGIN - ACTION ON PARAMETER Transparently sent through the BSS.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DATA INDICATION 3BK 11203 0138 DSZZA 156/639

6.15 DTM ASSIGNMENT COMMAND


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO SDCCH/FACCH 44.018

DTM ASSIGNMENT COMMAND ABIS BTS Transparent A

DIRECTION

This message is sent on the main DCCH by the network to the mobile station to change the channel configuration to a configuration with CS and packet connections when no timing adjustment is needed and reallocation of the CS timeslot is required. From: BSC To: MS INFORMATION ELEMENT NAME TYPE COMMENT LENGTH (byte) 2 1 3 6-10 17 2 4-131 3-10 5-14 5-14 4-8 212 TIMER

INFORMATION ELEMENT LIST

Header M V Power Command M V Channel Description GPRS broadcast information M LV O TV Cell Channel Description O TV Channel mode Frequency List C TLV Mobile Allocation C TLV RR Packet Uplink Assignment O TLV O TLV RR Packet Downlink Assignment O TLV MultiRate configuration IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION

(1) (2) (3) (4) (5)

ABNORMAL SITUATION

FOLLOWING EVENT SPECIF DOC. REF. (1) (2) (3) (4) (5)

See ref [38]

Used in the two following cases: i) Used for Phase 2 biband MS when the assigned channel is hopping in the P-GSM band or ii) used for any MS when the assigned channel is hopping in the G1, GSM850, DCS1800 or DCS1900 band. Used for Phase 2 monoband P-GSM or for Phase 2 monoband E-GSM MS when the assigned channel is hopping in the P-GSM band. Included only if a TBF UL has to be established Included only if a TBF DL has to be established Included only if AMR FR / AMR HR speech codec is used

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 157/639

6.15.1 GENERAL DESCRIPTION 6.15.1.1 Phase 2 monoband P-GSM or E-GSM MS The assigned channel is assumed hopping on more than one frequency in the P-GSM band. Note : it is quite unlikely to find monoband DTM capable MS. 8 0 0 Power Command Channel 0 7 0 1 6 0 0 5 0 0 4 0 1 3 1 1 Power Level MAIO (high part) TN 2 1 0 1 0 0

EPC FPC_E mode PC Channel type and TDMA offset TSC H=1-> H=0->

Description

MAIO low part

spare HSN

ARFCN (Hpart)

ARFCN (low part) length

GPRS broadcast information 0 0 0

See description below 0 0 FORMAT-ID 120 0 124 CA ARFCN CA ARFCN CA ARFCN 1 0 1 0 0 123 0 122 0 121 113 0

Cell Channel Description

. 007 0 0 MA C 8n-1 006 0 0 005 004

008 Channel Mode 0 0 MC C 8n MA C 8 0

003 0 0

002 0 1

001 1 1 MA C 8n-7 MA C 1 1

Mode of the channel Length (value 8 ) 1 0

Mobile Allocation

RR Packet Uplink Assignment

Length

See description below 0 0 0 1 0 1 1 0

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 158/639

RR Packet Downlink Assignment 0 0 0

Length See description below 1 Length 0 1 Spare 1 1

configuration

MultiRate

Multirate speech version

Parameters for MultiRate speech

NSCB

ICMI

Start mode

6.15.1.2 Phase 2 biband MS For phase 2 biband MS the "Frequency List, after time" is always used to assigned a channel hopping on more than one frequency in the P-GSM band because it is the shortest way of coding frequencies. Note : it is quite likely that all DTM capable MS will be multiband. 6.15.1.2.1 Assigned channel in the G1, GSM850, DCS1800 or DCS1900 band When the assigned channel is hopping on more than one frequency in the G1, GSM850, DCS1800 or DCS1900 band, the Frequency List IE is used with Range 1024, range 512, range 256 or range 128 format: 8 0 0 Power Command Channel 0 7 0 1 6 0 0 5 0 0 4 0 1 3 1 1 Power Level MAIO (high part) TN 2 1 0 1 0 0

EPC FPC_E mode PC Channel type and TDMA offset TSC H=1-> H=0->

Description

MAIO low part

spare HSN

ARFCN (Hpart)

ARFCN (low part) length

GPRS broadcast information Channel Mode 0 0 0 0 0 0 0

See description below Mode of the channel 1 0 Length 0 1 0 0 0 0 1 1 0 ORIGARFCN high

Frequency List

1 0 FORMAT-ID ORIGARFCN (low) W(1) (low part)

FORMAT-ID (continued) Note 1 ORIG-ARFCN (middle part) W(1) (high part) W(2) (high part)

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 159/639

W(2) to W(3) are on 8 bits, when present; W(4) to W(7) are on 7 bits, when present; W(8) to W(15) are on 6 bits, when present; W(16) to W(31) are on 5 bits, when present; W(32) to W(63) are on 4 bits, when present. .. RR Packet Uplink Assignment 0 0 0 1 Length 0 1 0 1

See description below 0 0 0 1 Length 0 1 1 0

RR Packet Downlink Assignment

See description below 0 0 0 1 Length 0 1 Spare 1 1

configuration

MultiRate

Multirate speech version

Parameters for MultiRate speech

NSCB

ICMI

Start mode

Note1: 0 x x: 1 0 0: 1 0 1: 1 1 0: 1 1 1:

Range 1024 format; Range 512 format; Range 256 format; Range 128 format; Variable bit map

Or with variable bitmap format: 8 0 0 Power Command Channel 0 7 0 1 6 0 0 5 0 0 4 0 1 3 1 1 Power Level MAIO (high part) TN 2 1 0 1 0 0

EPC FPC_E mode PC Channel type and TDMA offset TSC H=1-> H=0->

Description

MAIO low part

spare HSN

ARFCN (Hpart)

ARFCN (low part) length

GPRS broadcast information Channel Mode 0 0 ED EVOLIUM 05 RELEASED 0 0 0 0

See description below Mode of the channel 1 0 1 0 0 0 0 1 1 0

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 160/639

Frequency List

1 0 FORMAT-ID

RR Packet Uplink Assignment

RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN 8k-40 8k-39 8k-38 8k-37 8k-36 8k-35 8k-34 8k-33 0 0 0 1 0 1 0 1 Length See description below 0 0 0 1 Length 0 1 1 0

ORIG- RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN ARFCN 1 2 3 4 5 6 7 (low) .

1 FORMAT-ID (continued) ORIG-ARFCN (middle part)

Length

ORIGARFCN high

RR Packet Downlink Assignment

See description below 0 0 0 1 Length 0 1 Spare 1 1

configuration

MultiRate

Multirate speech version

Parameters for MultiRate speech

NSCB

ICMI

Start mode

Notes: 1) k indicates the octet number of the I.E. Frequency List, after time. k 132.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 161/639

6.15.2 POWER COMMAND TYPE: M DEFINITION To provide the power level for the Mobile Station. BIT DESCRIPTION 8 0 EPC mode 7 FPC_ EPC 6 5 4 Power level 3 2 1

Bits 8 of octet 1 are spare bits (coded as 0). SUB PARAMETER DEFINITION EPC_mode The EPC mode field indicates whether the assigned channel(s) shall be in enhanced power control (EPC) mode. It is only valid for channels on which EPC may be used. It is coded as follows: 0 Channel(s) not in EPC mode 1 Channel(s) in EPC mode, not used FPC_EPC The FPC_EPC field (octet 2) has different interpretation depending on the channel mode of the assigned channed(s) and the value of the EPC mode field. If the channel mode is such that fast power control (FPC) may be used, the FPC_EPC field indicates whether Fast Measurement Reporting and Power Control mechanism is used. It is coded as follows: 0 FPC not in use 1 FPC in use, not used If the channel mode is such that EPC may be used and the EPC mode field indicates that the channel is in EPC mode, the FPC_EPC field indicates whether EPC shall be used for uplink power control. It is coded as follows: 0 EPC not in use for uplink power control, not used 1 EPC in use for uplink power control, not used Power level: binary representation of the power control level (0 to 31)

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 162/639

GSM phase 1 Power Control level 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 GSM phase 2 Power Control level 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Peak power 43 dBm 41 dBm 39 dBm 37 dBm 35 dBm 33 dBm 31 dBm 29 dBm 27 dBm 25 dBm 23 dBm 21 dBm 19 dBm 17 dBm 15 dBm 13 dBm GSM-900 Binary value 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Peak power 30 dBm 28 dBm 26 dBm 24 dBm 22 dBm 20 dBm 18 dBm 16 dBm 14 dBm 12 dBm 10 dBm 8 dBm 6 dBm 4 dBm DCS-1800 Binary value 0 1 2 3 4 5 6 7 8 9 10 11 (note 1) 12 (note 1) 13 (note 1)

GSM-900

DCS-1800

GSM-850

Peak power Binary value Peak power Binary value Peak Power Binary value 30 dBm 0 28 dBm 1 39 dBm 2 26 dBm 2 39 dBm 2 37 dBm 3 24 dBm 3 37 dBm 3 35 dBm 4 22 dBm 4 35 dBm 4 33 dBm 5 20 dBm 5 33 dBm 5 31 dBm 6 18 dBm 6 31 dBm 6 29 dBm 7 16 dBm 7 29 dBm 7 27 dBm 8 14 dBm 8 27 dBm 8 25 dBm 9 12 dBm 9 25 dBm 9 23 dBm 10 10 dBm 10 23 dBm 10 21 dBm 11 8 dBm 11 21 dBm 11 19 dBm 12 6 dBm 12 19 dBm 12 17 dBm 13 4 dBm 13 17 dBm 13 15 dBm 14 2 dBm 14 15 dBm 14 13 dBm 15 0 dBm 15 13 dBm 15 11 dBm 16 11 dBm 16 9 dBm 17 9 dBm 17 7 dBm 18 7 dBm 18 5 dBm 19 5 dBm 19

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 163/639

Power Control level 30 31 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

DCS-1900 Peak power 33 dBm 32 dBm 30 dBm 28 dBm 26 dBm 24 dBm 22 dBm 20 dBm 18 dBm 16 dBm 14 dBm 12 dBm 10 dBm 8 dBm 6 dBm 4 dBm 2 dBm 0 dBm

Note 1: These power control levels are not authorised for MS DCS-1800 class 1. They are only used by the MS class 2. PARAMETER ORIGIN - ACTION ON PARAMETER The parameter is transparent for the BTS. At the BSC site, this parameter is given to the Mobile Station according to the classmark information received from the MS.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 164/639

6.15.3 CHANNEL DESCRIPTION TYPE: M DEFINITION To provide a description of an allocatable channel together with its SACCH. BIT DESCRIPTION 8 Channel type and TDMA offset TSC H=1-> H=0-> 7 6 5 4 3 TN 2 1 1 2 3

MAIO low part SUB PARAMETER DEFINITION Octet 1: Channel type and TDMA offset: Bits 8 0 0 0 0 7 0 0 0 1 6 0 0 1 T 5 0 1 T T 4 1 T T T

MAIO (high part) spare ARFCN (Hpart) HSN A R F C N (low part)

TCH/F + ACCHs TCH/H + ACCHs SDCCH/4 + SACCH/C4 or CBCH (SDCCH/4) SDCCH/8 + SACCH/C8 or CBCH (SDCCH/8) all other values reserved

Not used in this message Not used in this message

T bit indicates the subchannel number. TN : Time slot (0 to 7) Octets 2 and 3: TSC : Training Sequence Code (0 to 7) H : "0" Single RF channel "1" RF hopping channel

Channel selector: H = "0": The channel selector field consists of the absolute RF channel number. Bits 4 3: 0 0 spare ARFCN: Octet 3 Octet 4 Bits 2, 1 Bits 8 to 1 High part of ARFCN ARFCN low part

The ARFCN is coded as the binary representation of the absolute RF channel Number. Range: 0 to 1023 LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 165/639

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

H = "1":

The channel selector field consists of the mobile allocation index offset, MAIO, and the hopping sequence number, HSN. Bits 4 to 1 Bits 8 to 7 high part low part

MAIO: Octet 3 Octet 4

HSN (Octet 4, Bits 1 to 6): Value 0 to 63. The HSN field is coded as the binary representation of the hopping sequence number.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 166/639

6.15.4 GPRS BROADCAST INFORMATION The GPRS broadcast informationi information element provides the mobile station with relevant GPRS information needed for correct DTM operation. < GPRS broadcast information value part > ::= < GPRS Cell Options : < GPRS Cell Options IE > > < GPRS Power Control Parameters : < GPRS Power Control Parameters struct > > < spare bit >**; 6.15.4.1 GPRS Cell Options TYPE: O DEFINITION The GPRS Cell Options information element is used to control a set of cell options related to GPRS. BIT DESCRIPTION

< GPRS Cell Options IE > ::= < NMO : bit (2) > < T3168 : bit (3) > < T3192 : bit (3) > < DRX_TIMER_MAX : bit (3) > < ACCESS_BURST_TYPE : bit > < CONTROL_ACK_TYPE : bit > < BS_CV_MAX : bit (4) > {0|1 < PAN_DEC : bit (3) > (Note 1) < PAN_INC : bit (3) > < PAN_MAX : bit (3) > } -- Optional extension information, {0|1 <Extension Length : bit (6)> (Note 2) < bit (val(Extension Length) + 1) & { <Extension Information > ! { bit ** = <no string> } } > } ;

< Extension Information> : : = { 0 | 1 EGPRS supported by the cell if the choice bit is set to '1' <EGPRS_PACKET_ CHANNEL_REQUEST : bit> < BEP_PERIOD : bit (4) > } <PFC_FEATURE_MODE: bit> <DTM_SUPPORT: bit> <BSS_PAGING_COORDINATION: bit> -- REL-4 extension: < CCN_ACTIVE : bit > < NW_EXT_UTBF : bit >; -- REL 6 extension: < MULTIPLE_TBF_CAPABILITY : bit > < EXT_UTBF_NO_DATA : bit > < DTM_ENHANCEMENTS_CAPABILITY : bit > {0 -- MBMS procedures not supported by the cell if the choice bit is set to '0' (Note 3) |1 -- MBMS procedures supported by the cell if the choice bit is set to '1' < DEDICATED_MODE_MBMS_NOTIFICATION_SUPPORT: bit > < MNCI_SUPPORT : bit > } <spare bit > ** ; Note 1: PAN_DEC, PAN_INC, PAN_MAX should be present. Note 2: Extension information should be present. ED EVOLIUM 05 RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 167/639

Note 3: MBMS procedures are not supported. SUB PARAMETER DEFINITION NMO (2 bit field) This field is the binary representation of the Network Mode of Operation, see 3GPP TS 03.60: 00 Network Mode of Operation I 01 Network Mode of Operation II 10 Network Mode of Operation III 11 Reserved.

T3168 (3 bit field) This field is the binary representation of the timeout value of timer T3168. Range: 0 to 7. The timeout value is given as the binary value plus one in units of 500 millisecond.

T3192 (3 bit field) This field is the binary representation of the timeout value of timer T3192. Range: 0 to 7. The timeout value is given as follows: 000 500 msec 001 1000 msec 010 1500 msec 011 0 msec 100 80 msec 101 120 msec 110 160 msec 111 200 msec DRX_TIMER_MAX (3 bit field) This field is the binary representation of the parameter DRX_TIMER_MAX. Range: 0 to 7. The parameter value is given as two taken to the power of the binary value minus one (2 (bv - 1) ) in units of 1 second. The binary value zero indicates the parameter value zero (i.e, the parameter takes the values: 0, 1 s, 2 s, 4 s, .. 64 s.) ACCESS_BURST_TYPE (1 bit field) The ACCESS_BURST_TYPE field indicates if the 8 or 11 bit format shall be used in the PACKET CHANNEL REQUEST message, the PTCCH uplink block (3GPP TS 04.04) and in the PACKET CONTROL ACKNOWLEDGMENT message when the format is four access bursts. The field is coded as follows: 0 8-bit format shall be used 1 11-bit format shall be used CONTROL_ACK_TYPE (1 bit field) This field is the binary representation of the default format of the PACKET CONTROL ACKNOWLEDGMENT message: 0 default format is four access bursts 1 default format is RLC/MAC control block. (not used)

BS_CV_MAX (4 bit field) This field is the binary representation of the parameter BS_CV_MAX. Range: 0 to 15. The value BS_CV_MAX=0 shall be interpreted as value BS_CV_MAX=1 for calculation of T3198, T3200 and N3104max values PAN_DEC (3 bit field) This field is the binary representation of the parameter PAN_DEC. If the field in not included, the default value 0 shall be used. Range: 0 to 7.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 168/639

PAN_INC (3 bit field) This field is the binary representation of the parameter PAN_INC. If the field in not included, the default value 0 shall be used. Range: 0 to 7.

PAN_MAX (3 bit field) This field defines the maximum value allowed for counter N3102. 000 maximum value allowed for counter N3102 is 4 001 maximum value allowed for counter N3102 is 8 ... 111 maximum value allowed for counter N3102 is 32 If the PAN_MAX field in not included, the default value 0 (i.e. N3102 max = 4) shall be used. Optional extension information: EGPRS_PACKET_CHANNEL_REQUEST (1 bit field) 0 EGPRS capable MSs shall use EGPRS PACKET CHANNEL REQUEST message for uplink TBF establishment on the PRACH when there is a PBCCH in the cell or on the RACH when there is no PBCCH in the cell. EGPRS capable MSs shall use two phase packet access with PACKET CHANNEL REQUEST message on the PRACH for uplink TBF establishment when there is a PBCCH in the cell. EGPRS capable MSs shall use two phase packet access with CHANNEL REQUEST message on the RACH when there is no PBCCH in the cell.

(not used)

BEP_PERIOD (4 bit field)

This field contains the bit error probability (BEP) filter averaging period

PFC_FEATURE_MODE (1 bit field) 0 1 The network does not support packet flow context procedures. The network supports packet flow context procedures.

DTM_SUPPORT (1 bit field) 0 1

This field indicates whether the cell supports DTM or not. It is coded as follows: The cell does not support DTM procedures. The cell supports DTM procedures.

BSS_PAGING_COORDINATION (1 bit field)

This field indicates the network support of CS paging co-ordination in packet transfer mode during network mode of operation II and III. This field shall be ignored by the mobile station during network mode of operation I. It is coded as follows: 0 1 The cell does not support Circuit-Switched paging co-ordination The cell supports Circuit-Switched paging co-ordination (not used)

CCN_ACTIVE (1 bit field) This field indicates whether the cell supports Network Assisted Cell Change (NACC) or not. It is coded as follows : 0 The cell does not support NACC procedures. 1 The cell supports NACC procedures. ED EVOLIUM 05 RELEASED LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 169/639

0138_05.doc 15/02/2008

NW_EXT_UTBF (1 bit field) This field indicates whether the cell supports Uplink Extended TBF mode or not. It is coded as follows : 0 The cell does not support Extended UL TBF mode procedures. 1 The cell supports Extended UL TBF mode procedures. MULTIPLE_TBF_CAPABILITY (1 bit field) This field indicates whether or not the cell supports multiple TBF procedures for A/Gb mode. It is coded as follows : 0 The cell does not support multiple TBF procedures for A/Gb mode. 1 The cell supports multiple TBF procedures for A/Gb mode. (not used) EXT_UTBF_NO_DATA (1 bit field) This field indicates whether the mobile station during extended uplink TBF mode may refrain from sending PACKET UPLINK DUMMY CONTROL BLOCK messages when there is no other RLC/MAC block ready to send in an uplink radio block allocated by the network. It is coded as follows : 0 The mobile station shall send a PACKET UPLINK DUMMY CONTROL BLOCK message when there is no other RLC/MAC block ready to send in an uplink radio block allocated by the network. 1 The mobile station may refrain from sending a PACKET UPLINK DUMMY CONTROL BLOCK message when there is no other RLC/MAC block ready to send in an uplink radio block allocated by the network. DTM_ENHANCEMENTS_CAPABILITY (1 bit field) This field indicates whether the cell supports enhanced DTM CS establishment and enhanced DTM CS release or not. It is coded as follows : 0 The cell does not support enhanced DTM CS establishment and enhanced DTM CS release. 1 The cell supports enhanced DTM CS establishment and enhanced (not used) DTM CS release. DEDICATED_MODE_MBMS_NOTIFICATION_SUPPORT (1 bit field) This field indicates whether the cell supports Dedicated Mode MBMS Notification or not. It is coded as follows: 0 The cell does not support the Dedicated Mode MBMS Notification (not used) procedures. 1 The cell supports the Dedicated Mode MBMS Notification procedures. (not used) MNCI_SUPPORT (1 bit field) This field indicates whether the cell supports the distribution of MBMS NEIGHBOURING CELL INFORMATION messages. It is coded as follows: 0 The cell does not support the distribution of MBMS NEIGHBOURING (not used) CELL INFORMATION messages 1 The cell supports the distribution of MBMS NEIGHBOURING CELL (not used) INFORMATION messages PARAMETER ORIGIN - ACTION ON PARAMETER LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 170/639

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

6.15.4.2 GPRS Power Control Parameters TYPE: O DEFINITION BIT DESCRIPTION < ALPHA : bit (4) > < T_AVG_W : bit (5) > < T_AVG_T : bit (5) > < PC_MEAS_CHAN : bit > < N_AVG_I : bit (4) >;

SUB PARAMETER DEFINITION ALPHA (4 bit field) The ALPHA field is the binary representation of the parameter for MS output power control in units of 0.1, see 3GPP TS 05.08: Range: 0 to 10. Values greater than 10 shall be interpreted as 10 by the mobile station.

T_AVG_W (5 bit field) The T_AVG_W field is the binary representation of the parameter TAVG_W for MS output power control, see 3GPP TS 05.08: Range: 0 to 25. Values greater than 25 shall be interpreted as 25 by the mobile station. T_AVG_T (5 bit field) The T_AVG_T field is the binary representation of the parameter TAVG_T for MS output power control, see 3GPP TS 05.08: Range: 0 to 25. Values greater than 25 shall be interpreted as 25 by the mobile station.

PC_MEAS_CHAN (1 bit field) The PC_MEAS_CHAN field indicates the type of channel which shall be used for downlink measurements for power control: 0 BCCH; 1 PDCH. N_AVG_I (4 bit field) The N_AVG_I field is the binary representation of the parameter NAVG_I for MS output power control, see 3GPP TS 05.08. Range: 0 to 15. PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 171/639

6.15.5 CELL CHANNEL DESCRIPTION TYPE: O DEFINITION To provide the reference frequency list to be used to decode the mobile allocation information element.

BIT DESCRIPTION Bitmap 0 format 8 0 0 7 0 0 6 0 0 5 1 0 4 0 124 3 0 2 0 1 0 121 113 003 002 001 1

FORMAT-ID 120 008 007

CA ARFCN ......................... ........... 006 CA ARFCN 005 004

123

CA ARFCN

122

2 3

17

Bits 5 and 6 are spare bits in octet 2. SUB PARAMETER DEFINITION FORMAT-ID : Format identifier Only bitmap 0 Format is supported.

CA ARFCN N : Cell Allocation Absolute Radio Frequency Channel Number N CA ARFCN N : "0" not belonging to the cell allocation "1" belonging to the cell allocation PARAMETER ORIGIN - ACTION ON PARAMETER Format-ID: Fixed value = 00. CA ARFCN N : Value stored in BSC and updated according to system reconfigurations.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 172/639

6.15.6 CHANNEL MODE TYPE: O DEFINITION : The channel mode information element gives the mode of encoding, decoding and transcoding. BIT DESCRIPTION 8 0 7 0 6 0 5 1 mode 4 0 3 0 2 0 1 1

SUB PARAMETER DEFINITION The mode field is encoded as follows: Bits 87654321 00000000 00000001 00100001 01000001 10000001 10000010 10000011 01100001 01100010 01100100 01100111 01100101 01100110 00100111 01100011 01000011 00001111 00000011 00001011 00010011 signaling only speech (full rate or half rate version 1) speech (full rate or half rate version 2) speech (full rate or half rate version 3) speech (full rate or half rate version 4) speech (full rate or half rate version 5) speech (full rate or half rate version 6) data, 43.5 kbit/s (downlink)+14.5 kbps (uplink) data, 29.0 kbit/s (downlink)+14.5 kbps (uplink) data, 43.5 kbit/s (downlink)+29.0 kbps (uplink) data, 14.5 kbit/s (downlink)+43.5 kbps (uplink) data, 14.5 kbit/s (downlink)+29.0 kbps (uplink) data, 29.0 kbit/s (downlink)+43.5 kbps (uplink) data, 43.5 kbit/s radio interface rate data, 32.0 kbit/s radio interface rate data, 29.0 kbit/s radio interface rate data 14.5 kbit/s radio interface rate data 12 kbit/s radio interface rate data 6 kbit/s radio interface rate data 3.6 kbit/s radio interface rate All other values are reserved and not supported.

not supported not supported not supported not supported not supported not supported not supported not supported not supported not supported not supported not supported

PARAMETER ORIGIN - ACTION ON PARAMETER Data rates received on the A interface which are lower than 2.4 kbit/s are mapped onto the "data 3.6 kbit/s radio interface rate" value in this element.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 173/639

6.15.7 FREQUENCY LIST TYPE: C DEFINITION To provide the absolute radio frequency channel numbers used in a cell. BIT DESCRIPTION Bit map 0 format 8 0 supported but not used 7 0 6 0 5 1 4 0 3 0 2 1 1 0 1 3 4 18

0 0 0 0 ARFCN ARFCN ARFCN ARFCN FORMAT-ID 124 123 122 121 ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN 120 119 118 117 116 115 114 113 : : ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN 008 007 006 005 004 003 002 001 Range 1024 format 8 0 supported 7 0 6 0 5 1 4 0 3 0 2 1 1 0

Length of frequency list contents =16

1 0 FORMAT-ID

Length of frequency list contents 0 0 FORMID W(1) (low part) : 0 F0

W(1) (high part)

1 3

W(2) to W(3) are on 9 bits, when present W(4) to W(7) are on 8 bits, when present W(8) to W(15) are on 7 bits, when present W(16) to W(31) are on 6 bits, when present W(2k) to W(2(k+1)- 1)are on 10-k bits when present Range 512 format 8 0 7 0 supported 6 0 5 1 4 0 3 0 2 1 1 0 ORIGARFCN 1 3

1 0 FORMAT-ID

Length of frequency list contents 0 0 1

0 0 FORMAT-ID (continued) ORIG-ARFCN (middle part)

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 174/639

ORIGARFCN (low) W(1) (low part)

W(1) (high part) W(2) (high part)

5 6

: W(2) to W(3) are on 8 bits, when present W(4) to W(7) are on 7 bits, when present W(8) to W(15) are on 6 bits, when present W(16) to W(31) are on 5 bits, when present W(2k) to W(2(k+1)- 1) are on 9-k bits when present Range 256 format 8 0 7 0 supported 6 0 5 1 4 0 3 0 2 1 1 0 ORIGARFCN 1 3

1 0 FORMAT-ID ORIGARFCN (low) W(1) (low)

Length of frequency list contents 0 0 1

0 1 FORMAT-ID (continued) ORIG-ARFCN (middle part) W(1) (high part) W(2) :

4 5 6

W(2) to W(3) are on 7 bits, when present W(4) to W(7) are on 6 bits, when present W(8) to W(15) are on 5 bits, when present W(16) to W(31) are on 4 bits, when present W(2k) to W(2(k+1)- 1) are on 8-k bits when present Range 128 format 8 0 7 0 supported 6 0 5 1 4 0 3 0 2 1 1 0 ORIGARFCN 1 3

1 0 FORMAT-ID ORIGARFCN (low)

Length of frequency list contents 0 0 1

1 0 FORMAT-ID (continued) ORIG-ARFCN (middle part) W(1)

4 5

: W(2) to W(3) are on 6 bits, when present W(4) to W(7) are on 5 bits, when present W(8) to W(15) are on 4 bits, when present W(16) to W(31) are on 3 bits, when present W(2k) to W(2(k+1)- 1) are on 7-k bits when present Variable bit map format ED EVOLIUM 05 RELEASED supported LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 175/639

0138_05.doc 15/02/2008

8 0

7 0

1 0 FORMAT-ID ORIGARFC N low RRFC N 8k-40

5 4 3 1 0 0 Length of frequency list contents 0 0 1 1 spare spare FORMAT-ID (continued) ORIG-ARFCN (middle part) RRFCN 2 RRFCN 3 RRFCN 4 RRFCN 5

6 0

2 1 1

1 0 ORIGARFCN high RRFCN 7

1 2 3 4 5

RRFCN 1

RRFCN 6

RRFCN 8k-39

RRFCN 8k-38

RRFCN 8k-37

RRFCN 8k-36

RRFCN 8k-35

RRFCN 8k-34

RRFCN 8k-33

k indicates the octet number of the I.E. k 131. SUB PARAMETER DEFINITION Bits 5 and 6 are spare bits in octet 3. FORMAT-ID F0 : Frequency 0 indicator. Coded 0 if ARFCN 0 is not a member of the set. Coded 1 if ARFCN 0 is a member of the set. : Format identifier.

ORIG-ARFCN : This field encodes the ARFCN of one frequency belonging to the set. This value is also used as the origin of the bit map to generate all the other frequencies. RRFCN N : Relative Radio Frequency Channel Number N. - For an RF channel with ARFCN = (ORIG-ARFCN + N) mod 1024 belonging to the set, then RRFCN N bit is coded as '1'. - For an RF channel with ARFCN = (ORIG-ARFCN + N) mod 1024 not belonging to the set, then RRFCN N bit is coded as '0'. W

: Each non null W(k) allows to compute, together with some previous W(i) the ARFCN F(k) of a frequency in the set (see 3GPP TS 04.18 for computation formulas).

PARAMETER ORIGIN - ACTION ON PARAMETER ORIG-ARFCN, RRFCN N: Values stored in BSC and updated according to system reconfigurations.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 176/639

6.15.8 MOBILE ALLOCATION TYPE C DEFINITION

To provide the part of the RF channels belonging to the cell allocation which is used in the Mobile Station hopping sequence (primary band in GSM900). BIT DESCRIPTION 8 0 MA C 8n : 7 0 MA C 8n-1 6 0 5 1 4 0 3 0 2 1 1 1 MA C 8n-7 : MA C 001

length of Mobile allocation contents (value 8 )

MA C 008 SUB PARAMETER DEFINITION

MA length depends on the relative frequency span of the frequencies in the cell allocation frequency list MA Ci: Mobile Allocation RF Channel i - the RF channels represented in the MA C i bit fields are those which in the "Cell Channel Description" information element are coded with "1" in the CA ARFCN N bit fields. MA Ci = CA ARFCN N(i) i = 1,2...NF

(NF = Number of Frequencies in the CA frequency list). For a RF channel belonging to the Mobile Allocation the MA C i bit is coded with a "1", for a RF channel not belonging to the Mobile Allocation, the MA C i bit is coded with a "0". If NF mod 8 0 then bits NF to 8n in octet 3 must be coded with a "0" in each. PARAMETER ORIGIN - ACTION ON PARAMETER The parameter is transparent for the BTS when received from the BSC. At the BSC site the following actions have to be performed Mobile Allocation Stored and Updated during system reconfiguration.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 177/639

6.15.9 RR PACKET UL ASSIGNMENT TYPE O DEFINITION

Describes the UL allocated resources. BIT DESCRIPTION < RR Packet Uplink Assignment value part > ::= < CHANNEL_CODING_COMMAND : bit (2) > < TLLI_BLOCK_CHANNEL_CODING : bit (1) > < Packet Timing Advance : Packet Timing Advance IE > { 01 < Dynamic Allocation : Dynamic Allocation struct > | 10 < reserved > | 11 < reserved > | 00 { 0 < Multiple TBF Allocation : Multiple TBF Allocation struct > | 1 < Extension > } } { null -- Receiver compatible with earlier release | -- Additions for R99 {0|1 < EGPRS_MCS_MODE : bit (4) > < RESEGMENT : bit (1) > < EGPRS Window Size : < EGPRS Window Size IE >> } {0|1 < Packet Extended Timing Advance : bit (2) > } < SPARE_BITS : bit ** > } ; < Packet Timing Advance IE > ::= {0|1 < TIMING_ADVANCE_VALUE : bit (6) > } {0|1 < TIMING_ADVANCE_INDEX : bit (4) > < TIMING_ADVANCE_TIMESLOT_NUMBER : bit (3) > } ; <Dynamic Allocation struct > ::= < Extended Dynamic Allocation : bit(1)> {0 | 1 < P0 : bit (4) > < PR_MODE : bit (1) > } < USF_GRANULARITY : bit (1) > { 0 | 1 < UPLINK_TFI_ASSIGNMENT : bit (5) > } 0 {0 -- Timeslot Allocation { 0 | 1 < USF_TN0 : bit (3) > } { 0 | 1 < USF_TN1 : bit (3) > } { 0 | 1 < USF_TN2 : bit (3) > } { 0 | 1 < USF_TN3 : bit (3) > } { 0 | 1 < USF_TN4 : bit (3) > } { 0 | 1 < USF_TN5 : bit (3) > } { 0 | 1 < USF_TN6 : bit (3) > } { 0 | 1 < USF_TN7 : bit (3) > } |1 -- Timeslot Allocation with Power Control Parameters < ALPHA : bit (4) > {0|1 < USF_TN0 : bit (3) > < GAMMA_TN0 : bit (5) > } {0|1 < USF_TN1 : bit (3) > < GAMMA_TN1 : bit (5) > } {0|1 < USF_TN2 : bit (3) > < GAMMA_TN2 : bit (5) > } {0|1 < USF_TN3 : bit (3) > < GAMMA_TN3 : bit (5) > } {0|1 < USF_TN4 : bit (3) > ED EVOLIUM 05 RELEASED LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 178/639

0138_05.doc 15/02/2008

{0|1 {0|1 {0|1

< GAMMA_TN4 : bit (5) > } < USF_TN5 : bit (3) > < GAMMA_TN5 : bit (5) > } < USF_TN6 : bit (3) > < GAMMA_TN6 : bit (5) > } < USF_TN7 : bit (3) > < GAMMA_TN7 : bit (5) > } } ;

Note : Only coding for dyanmic allocation is provided as it is the only method used in Alcatel BSS for DTM establishment (extended dynamic allocation is supported in DTM, but through TBF reallocation). SUB PARAMETER DEFINITION Field IEI Length CHANNEL_CODIN G_COMMAND Length (bits) 8 8 2 Coding Set to 00010101 Length (in bytes) of the value part of the 44.018 I.E., i.e.of the information detailed below The Channel Coding Indicator field indicates the channel coding scheme that the mobile station shall use when transmitting on the uplink. bits 21 value 00 CS-1 01 CS-2 10 CS-3 11 CS-4 This field indicates the channel coding command that the mobile station shall use for any RLC data block containing a TLLI field in the RLC data block header. This field is coded as shown: 0 the mobile station shall use CS-1 in GPRS TBF mode and MCS-1 in EGPRS TBF mode. 1 the mobile station shall use the value commanded in the CHANNEL_CODING_COMMAND or EGPRS_CHANNEL_CODING_COMMAND field. This field describes the timing advance mode and timing advance value assigned to the mobile station. Set to 00. Set to 01. This information field indicates the medium access mode to be used during the TBF. 0 Dynamic Allocation 1 Extended Dynamic Allocation Set to 0 (dynamic allocation is used) Set to 0. Set to 0. 0 the mobile station shall transmit one RLC/MAC block 1 the mobile station shall transmit four consecutive RLC/MAC blocks Set to 0. Set to 1. encoded as a binary number. Range 0 to 31 Set to 0. Set to 1. The ALPHA Power control parameter field is coded according to the following table: Bits 4321 0000 = 0.0

TLLI_BLOCK_CHA NNEL_CODING

Packet Advance

Timing

2 2 1

Extended Dynamic Allocation

USF_GRANULARI TY

1 1

UPLINK_TFI_ASSI GNMENT ALPHA

1 5 1 1 4

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 179/639

0001 ::: 1001 1010 USF_TN0 and GAMMA_TN0 to USF_TN7 and GAMMA_TN7 <=56

= 0.1 = 0.9 = 1.0

USFs of the allocated PDCHs and its GAMMA_TN. The length depends on the number of PDCHs allocated to the MS (6 PDCHs maximum in UL). See note 1. Set to 1 if the TBF is established in EGPRS mode, set to 0 otherwise. Included only if the TBF is established in EGPRS mode. Bits 4321 0 0 0 0 MCS-1 0 0 0 1 MCS-2 0 0 1 0 MCS-3 0 0 1 1 MCS-4 0 1 0 0 MCS-5 0 1 0 1 MCS-6 0 1 1 0 MCS-7 0 1 1 1 MCS-8 1 0 0 0 MCS-9 1 0 0 1 MCS-5-7 1 0 1 0 MCS-6-9 1011 to 1 1 1 1 reserved Included only if the TBF is established in EGPRS mode. 0 Retransmitted RLC data blocks shall not be re-segmented 1 Retransmitted RLC data blocks shall be re-segmented according to commanded MCS Included only if the TBF is established in EGPRS mode. See note 2. Set to 0.

1 EGPRS_MCS_MO DE 4

RESEGMENT

EGPRS Size

Window

5 1

Note 1: Field USF_TN0 GAMMA_TN0 USF_TN1 GAMMA_TN1 USF_TN2 GAMMA_TN2

Length (bits) 1 3 5 1 3 5 1 3 5

Coding Indicates whether TS 0 of the TRX is allocated to the MS USF value assigned to the MS for the allocated timeslot (range 0 to 7). Included only if the timeslot is allocated to the MS. binary representation of the parameter CH for MS output power control in units of 2 dB Indicates whether TS 1 of the TRX is allocated to the MS USF value assigned to the MS for the allocated timeslot (range 0 to 7). Included only if the timeslot is allocated to the MS. binary representation of the parameter CH for MS output power control in units of 2 dB Indicates whether TS 2 of the TRX is allocated to the MS USF value assigned to the MS for the allocated timeslot (range 0 to 7). Included only if the timeslot is allocated to the MS. binary representation of the parameter CH for MS output power control in units of 2 dB LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 180/639

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

USF_TN3 GAMMA_TN3 USF_TN4 GAMMA_TN4 USF_TN5 GAMMA_TN5 USF_TN6 GAMMA_TN6 USF_TN7 GAMMA_TN7

1 3 5 1 3 5 1 3 5 1 3 5 1 3 5

Indicates whether TS 3 of the TRX is allocated to the MS USF value assigned to the MS for the allocated timeslot (range 0 to 7). Included only if the timeslot is allocated to the MS. binary representation of the parameter CH for MS output power control in units of 2 dB Indicates whether TS 4 of the TRX is allocated to the MS USF value assigned to the MS for the allocated timeslot (range 0 to 7). Included only if the timeslot is allocated to the MS. binary representation of the parameter CH for MS output power control in units of 2 dB Indicates whether TS 5 of the TRX is allocated to the MS USF value assigned to the MS for the allocated timeslot (range 0 to 7). Included only if the timeslot is allocated to the MS. binary representation of the parameter CH for MS output power control in units of 2 dB Indicates whether TS 6 of the TRX is allocated to the MS USF value assigned to the MS for the allocated timeslot (range 0 to 7). Included only if the timeslot is allocated to the MS. binary representation of the parameter CH for MS output power control in units of 2 dB Indicates whether TS 7 of the TRX is allocated to the MS USF value assigned to the MS for the allocated timeslot (range 0 to 7). Included only if the timeslot is allocated to the MS. binary representation of the parameter CH for MS output power control in units of 2 dB

Note 2:

bit 54321 00000 00001 00010 00011 00100 00101 00110 00111 01000 01001 01010 01011 01100 01101 01110 01111 10000 10001 10010 10011 10100 10101 10110 05

Value of EGPRS window size 64 96 128 160 192 224 256 288 320 352 384 416 448 480 512 544 576 608 640 672 704 736 768 RELEASED

Comment

(maximum window size for a 1 timeslot TBF) (maximum window size for a 2 timeslot TBF)

(maximum window size for a 3 timeslot TBF)

(maximum window size for a 4 timeslot TBF)

(maximum window size for a 5 timeslot TBF)

ED EVOLIUM

0138_05.doc 15/02/2008

(maximum window size for a 6 timeslot TBF) LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 181/639

10111 11000 11001 11010 11011 11100 11101 11110 11111

800 832 864 896 928 960 992 1024 Reserved

(maximum window size for a 7 timeslot TBF)

(maximum window size for an 8 timeslot TBF)

PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 182/639

6.15.10 RR PACKET DL ASSIGNMENT TYPE O DEFINITION

Describes the DL allocated resources. BIT DESCRIPTION < RR Packet Downlink Assignment value part > ::= < MAC_MODE : bit (2) > < RLC_MODE : bit (1) > < TIMESLOT_ALLOCATION : bit (8) > < Packet Timing Advance : Packet Timing Advance IE > { 0 | 1 < P0 : bit (4) > 0 < PR_MODE : bit (1) > } { 0 | 1 < Power Control Parameters : Power Control Parameters IE > } { 0 | 1 < DOWNLINK_TFI_ASSIGNMENT : bit (5) > } 0 { null -- Receiver compatible with earlier release | {0|1 -- indicates EGPRS TBF mode, see 3GPP TS 44.060 < EGPRS Window Size : < EGPRS Window Size IE >> < LINK_QUALITY_MEASUREMENT_MODE : bit (2) > } { 0 | 1 < Packet Extended Timing Advance : bit (2) > } { null | 0 bit** = < no string > -- Receiver backward compatible |1 -- Additions for REL-6 { 1 < Multiple Downlink TBF Assignment : < Multiple Downlink TBF Assignment struct > > } ** 0 < SPARE_BITS : bit ** > } } ; < Packet Timing Advance IE > ::= {0|1 < TIMING_ADVANCE_VALUE : bit (6) > } {0|1 < TIMING_ADVANCE_INDEX : bit (4) > < TIMING_ADVANCE_TIMESLOT_NUMBER : bit (3) > } ; < Power Control Parameters IE > ::= < ALPHA : bit (4) > { 0 | 1 < GAMMA_TN0 : bit (5) > } { 0 | 1 < GAMMA_TN1 : bit (5) > } { 0 | 1 < GAMMA_TN2 : bit (5) > } { 0 | 1 < GAMMA_TN3 : bit (5) > } { 0 | 1 < GAMMA_TN4 : bit (5) > } { 0 | 1 < GAMMA_TN5 : bit (5) > } { 0 | 1 < GAMMA_TN6 : bit (5) > } { 0 | 1 < GAMMA_TN7 : bit (5) > } ; SUB PARAMETER DEFINITION Case 1: GPRS mode Field Length (bits) IEI 8 Length 8 MAC_MODE ED EVOLIUM 05 2 RELEASED Coding Set to 00010110 Length (in bytes) of the value part of the 44.018 I.E., i.e.of the information detailed below This information field indicates the medium access method to be LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 183/639

0138_05.doc 15/02/2008

used during the TBF. 21 00 Dynamic Allocation 01 Extended Dynamic Allocation 10 Fixed Allocation, not half duplex mode 11 Fixed Allocation, half duplex mode Set to 00. Only dynamic allocation is supported by Alcatel BSS for DTM establishment This field indicates the RLC mode of the requested TBF. 0 RLC acknowledged mode 1 RLC unacknowledged mode This information field indicates the timeslots assigned for use during the TBF or the timeslots carrying a PCCCH. Bit 8 indicates the status of timeslot 0, bit 7 indicates the status of timeslot 1, etc. At least one timeslot must be assigned. 0 Timeslot is not assigned 1 Timeslot is assigned This field describes the timing advance mode and timing advance value assigned to the mobile station. Set to 00. Set to 0. Set to 1. This field contains parameters the mobile station shall use to determine its TX power level. The length depends on the number of PDCHs allocated to the MS (8 PDCHs maximum in DL). Set to 1. encoded as a binary number. Range 0 to 31 Set to 0. Set to 0. Set to 0. Set to 1.

bit

RLC_MODE TIMESLOT_ALLO CATION

1 8

Packet Advance

Timing

2 1 1 <=52

Power control parameters

DOWNLINK_TFI_ ASSIGNMENT

1 5 1 1 1 1

Release 6 extensions

Case 2: EGPRS mode Field Length (bits) IEI Length 8 8

Coding

MAC_MODE

RLC_MODE TIMESLOT_ALLO CATION

1 8

Set to 00010110 Length (in bytes) of the value part of the 44.018 I.E., i.e.of the information detailed below This information field indicates the medium access method to be used during the TBF. bit 21 00 Dynamic Allocation 01 Extended Dynamic Allocation 10 Fixed Allocation, not half duplex mode 11 Fixed Allocation, half duplex mode Set to 00. Only dynamic allocation is supported by Alcatel BSS for DTM establishment This field indicates the RLC mode of the requested TBF. 0 RLC acknowledged mode 1 RLC unacknowledged mode This information field indicates the timeslots assigned for use during the TBF or the timeslots carrying a PCCCH. Bit 8 indicates the status of timeslot 0, bit 7 indicates the status of timeslot 1, etc. At least one timeslot must be assigned. LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 184/639

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

Packet Advance P0

Timing

2 1 4

PR_MODE

1 1 1 <=52

Power control parameters

DOWNLINK_TFI_A SSIGNMENT EGPRS Window Size LINK_QUALITY_M EASUREMENT_M ODE

1 5 1 1 5 2

0 Timeslot is not assigned 1 Timeslot is assigned This field describes the timing advance mode and timing advance value assigned to the mobile station. Set to 00. Set to 1. If P0 is present, then downlink power control is used. Bit 4321 0 0 0 0 P0 = 0 dB 0 0 0 1 P0 = 2 dB 0 0 1 0 P0 = 4 dB : 1 1 1 1 P0 = 30 dB Set to 0000. Set to 0. 0 PR mode A: for one addressed MS 1 PR mode B: for all MS Set to 0. Set to 1. This field contains parameters the mobile station shall use to determine its TX power level. The length depends on the number of PDCHs allocated to the MS (8 PDCHs maximum in DL). Set to 1. encoded as a binary number. Range 0 to 31 Set to 0. Set to 1. Included only if the TBF is established in EGPRS mode. See note 1. This field determines the measurements to be included within the EGPRS Timeslot Link Quality Measurements IE. bit 21 00 01

The MS shall not report either interference measurements (values) or per slot BEP measurements. The MS shall report available interference measurements (values) for timeslots 0 through 7. The value is defined in 3GPP TS 45.008. No per slot mean BEP measurements shall be reported. The MS shall report mean BEP on each allocated time slot. The MS shall report the mean BEP measurement corresponding to the modulation for which it has received a larger number of blocks since the previous report. The MS shall make BEP measurements only on Radio Blocks intended for it. No interference measurements ( values) shall be reported. The MS shall report mean BEP on each allocated time slot. The MS shall report the mean BEP measurement corresponding to the modulation for which it has received a larger number of blocks since the previous report. The MS shall make BEP measurements only on Radio Blocks intended for it. In addition to mean BEP, the MS shall report interference measurements (values) for no more LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 185/639

10

11

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

than four time slots. The MS shall first report available interference measurements for time slots 0, 1, 2, and 3; the MS shall next report available interference measurements for time slots 4, 5, 6, and 7; and the MS shall alternate between these two groups for subsequent reports. If any of the interference measurements are unavailable for reporting for reasons specified in 3GPP TS 45.008, the MS shall substitute least-recentlyreported and available interference measurements for time slots not already included in the report. Release 6 extensions Note 1: bit 54321 00000 00001 00010 00011 00100 00101 00110 00111 01000 01001 01010 01011 01100 01101 01110 01111 10000 10001 10010 10011 10100 10101 10110 10111 11000 11001 11010 11011 11100 11101 11110 11111 1 1 Set to 0. Set to 1.

Value of EGPRS window size 64 96 128 160 192 224 256 288 320 352 384 416 448 480 512 544 576 608 640 672 704 736 768 800 832 864 896 928 960 992 1024 Reserved

Comment

(maximum window size for a 1 timeslot TBF) (maximum window size for a 2 timeslot TBF)

(maximum window size for a 3 timeslot TBF)

(maximum window size for a 4 timeslot TBF)

(maximum window size for a 5 timeslot TBF)

(maximum window size for a 6 timeslot TBF)

(maximum window size for a 7 timeslot TBF)

(maximum window size for an 8 timeslot TBF)

PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 186/639

6.15.11 MULTIRATE CONFIGURATION TYPE: O DEFINITION : The MultiRate configuration information element gives all parameters related to a MultiRate speech codec. BIT DESCRIPTION 8 0 7 0 6 0 5 1 4 0 3 1 spare 2 1 1 1 1

Multirate speech version

NSCB

Length

ICMI

Start mode

3 . . .

2 4

Parameters for MultiRate speech

n (n 8) SUB PARAMETER DEFINITION Octet 3 MultiRate speech version: Bits 8 7 6 0 0 1 Adaptive MultiRate speech version 1 0 1 0 Adaptive MultiRate speech version 2 all other values are reserved. Note: The Adaptive Multirate speech versions are also referred as follows (see 3GPP TS 26.103): - Adaptive Multirate speech version 1: FR AMR, HR AMR or OHR AMR; - Adaptive Multirate speech version 2: FR AMR-WB, OFR AMR-WB or OHR AMR-WB; Only FR AMR, HR AMR and FR AMR-WB are supported. NSCB (Noise Suppression Control Bit): Bit 5 0 Noise Suppression can be used (default) 1 Noise Suppression shall be turned off ICMI (Initial Codec Mode Indicator): Bit 4 0 The initial codec mode is defined by the implicit rule provided in 3GPP TS 45.009 1 The initial codec mode is defined by the Start Mode field Bit 3 0 Spare

Start Mode: Bits 21 xx

The initial codec mode is coded as in 3GPP TS 45.009 section 3.4.1

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 187/639

Parameters for MultiRate speech (octet 4 to octet n, n 8):

1) Parameters for MultiRate speech field for the Multirate speech version 1 when a set with one codec mode is chosen 8 7 6 5 4 3 2 1 octet 4

Set of AMR codec modes

2) Parameters for MultiRate speech field for the Multirate speech version 1 when a set with two codec modes is chosen 8 Spare 7 6 5 4 3 2 1 octet 4 Spare octet 5 0 0 octet 6

Set of AMR codec modes 0 Hysteresis 1 Threshold 1 0 0

3) Parameters for MultiRate speech field for the Multirate speech version 1 & 2 when a set of three codec modes is chosen 8 Spare 7 6 5 4 3 2 1 octet 4 octet 5 Spare octet 6 0 octet 7

Set of AMR codec modes 0 Threshold 1 Threshold 2 Hysteresis 2 0

Hysteresis 1 Threshold 2 (cont.)

4) Parameters for MultiRate speech field for the Multirate speech version 1 when a set of four modes is chosen 8 Spare 7 6 5 4 3 2 1 octet 4 octet 5 octet 6 octet 7 octet 8

Set of AMR codec modes 0 Threshold 1 Threshold 2 Threshold 3 Hysteresis 3

Hysteresis 1 Threshold 2 (cont.) Threshold (3) Bit 8 Bit 7 Bit 6 Bit 5 ED EVOLIUM 0 1 0 1 0 1 0

Hysteresis 2

Set of adaptive MultiRate codec modes field for Multirate speech version 1 (octet 4) 12,2 kbit/s codec rate is not part of the subset; 12,2 kbit/s codec rate is part of the subset; 10,2 kbit/s codec rate is not part of the subset; 10,2 kbit/s codec rate is part of the subset; 7,95 kbit/s codec rate is not part of the subset; 7,95 kbit/s codec rate is part of the subset; 7,40 kbit/s codec rate is not part of the subset; RELEASED

05

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 188/639

Bit 4 Bit 3 Bit 2 Bit 1

1 0 1 0 1 0 1 0 1 0 0 0 0 1 0 1 0

7,40 kbit/s codec rate is part of the subset; 6,70 kbit/s codec rate is not part of the subset; 6,70 kbit/s codec rate is part of the subset; 5,90 kbit/s codec rate is not part of the subset; 5,90 kbit/s codec rate is part of the subset; 5,15 kbit/s codec rate is not part of the subset; 5,15 kbit/s codec rate is part of the subset; 4,75 kbit/s codec rate is not part of the subset; 4,75 kbit/s codec rate is part of the subset; spare spare spare 23.85 kbit/s codec rate is not part of the subset; 23.85 kbit/s codec rate is part of the subset (not supported); 15.85 kbit/s codec rate is not part of the subset; 15.85 kbit/s codec rate is part of the subset (not supported); 12.65 kbit/s codec rate is not part of the subset (not supported); 12.65 kbit/s codec rate is part of the subset; 8.85 kbit/s codec rate is not part of the subset (not supported); 8.85 kbit/s codec rate is part of the subset; 6.60 kbit/s codec rate is not part of the subset (not supported); 6.60 kbit/s codec rate is part of the subset;

Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1

Set of adaptive MultiRate codec modes field for Multirate speech version 2 (octet 4)

1 0 1 0 1

Threshold j (6 bits), see Note 1

Hysteresis j (4 bits), see Note 1

Coded as the binary representation of a value N. N corresponds to the threshold of C/I in dB, as defined in 3GPP TS 45.009; Coded as the binary representation of the hysteresis value associated to THRj, as defined in 3GPP TS 45.009.

Note 1: j = 1 corresponds to the lowest value of threshold in dB, j = 2 to the second lowest, j = 3 to the highest value.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT COMMAND 3BK 11203 0138 DSZZA 189/639

6.16 DTM ASSIGNMENT FAILURE


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION RADIO SDCCH/FACCH 44.018 This message is sent from the mobile station to the network to indicate that the mobile station has failed to seize the new packet channel. From: MS To: BSC INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST Header RR Cause TYPE COMMENT LENGTH (byte) 2 1 3 TIMER DTM ASSIGNMENT FAILURE ABIS BTS Transparent A

M V IMPLEMENTATION MAXIMUM LENGTH ABNORMAL SITUATION

NORMAL SITUATION FOLLOWING EVENT

SPECIF DOC. REF.

See ref [39]

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT FAILURE 3BK 11203 0138 DSZZA 190/639

6.16.1 GENERAL DESCRIPTION 8 0 0 7 0 1 6 0 0 5 0 0 4 0 1 3 1 0 2 1 0 1 0 0

RR Cause

6.16.2 RR CAUSE TYPE: M DEFINITION Reason for failure of the DTM Assignment. BIT DESCRIPTION 8 7 6 5 4 3 2 1

RR Cause

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM ASSIGNMENT FAILURE 3BK 11203 0138 DSZZA 191/639

6.17 DTM INFORMATION


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION RADIO SDCCH/FACCH 44.018

DTM INFORMATION ABIS BTS Transparent A

This message is sent by the network to the mobile station to provide the mobile station with necessary information for the operation in dual transfer mode. From: BSC INFORMATION ELEMENT NAME To: MS TYPE COMMENT LENGTH (byte) 2 6 4 12 TIMER

INFORMATION ELEMENT LIST

Header Routeing Area Identification DTM Information Details

M V M LV

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT ABNORMAL SITUATION

SPECIF DOC. REF.

See ref [40]

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM INFORMATION 3BK 11203 0138 DSZZA 192/639

6.17.1 GENERAL DESCRIPTION 8 0 0 Routing Identification Area 7 0 1 6 0 0 5 0 0 4 0 1 3 1 1 2 1 0 1 0 1

MNC digit 2

MNC digit 3

MCC digit 2

LAC RAC LAC

MNC digit 1

MCC digit 3

MCC digit 1

DTM information Details

See description below

Length

6.17.2 ROUTING AREA IDENTIFICATION TYPE: M DEFINITION The purpose of the routing area identification information element is to provide an unambiguous identification of routing areas within the GPRS coverage area. BIT DESCRIPTION 8 MCC digit 2 MNC digit 3 MNC digit 2 LAC 7 6 5 4 MCC digit 1 MNC digit 1 MCC digit 3 3 2 1 octet 1 octet 3 octet 5 octet 2 octet 4 octet 6

LAC cont'd RAC

SUB PARAMETER DEFINITION MCC (Mobile country code): MNC (Mobile network code): LAC (Location area code): RAC (Routing area code): ED EVOLIUM 05 RELEASED The MCC field is coded as in ITU-T Rec. E212, Annex A. 3 digits MNC is supported. Note that in case where only two digits MNC is used, the field MNC Digit 3 shall be filled in with 1111. Bit 8 of octet 4 is the most significant bit and bit 1 of octet 5 the least significant bit. Bit 8 of octet 6 is the most significant. Coding using full hexadecimal. LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM INFORMATION 3BK 11203 0138 DSZZA 193/639

0138_05.doc 15/02/2008

6.17.3 DTM INFORMATION DETAILS TYPE: M DEFINITION The DTM Information Details Information Element provides the mobile station with relevant GPRS information needed for correct DTM operation. This information element is contained in messages addressed to mobile stations supporting GPRS and DTM. BIT DESCRIPTION < DTM Information Details value part > ::= < MAX_LAPDm : bit (3) > < GPRS_MS_TXPWR_MAX_CCH : bit (5) > < Cell identity: bit (16) > { null | L -- Receiver backward compatible with earlier version |H -- Additions for REL-6 {0 -- MBMS procedures not supported by the cell if the choice bit is set to '0' |1 -- MBMS procedures supported by the cell if the choice bit is set to '1' < DEDICATED_MODE_MBMS_NOTIFICATION_SUPPORT: bit > < MNCI_SUPPORT: bit >} < spare bit >**}; Note: Only the first three parameters are supported. 8 7 MAX_LAPDm 6 5 Length 4 3 2 1 octet 1

Cell identity Cell identity

GPRS_MS_TXPWR_MAX_CCH

octet 4

octet 3

octet 2

SUB PARAMETER DEFINITION MAX_LAPDm (3 bit field) This field indicates the maximum number of LAPDm frames on which a layer 3 can be segmented into and be sent on the main DCCH. It is coded as follows: Bit 210 0 0 0 Any message segmented in up to 5 LAPDm frames. 0 0 1 Any message segmented in up to 6 LAPDm frames. 0 1 0 Any message segmented in up to 7 LAPDm frames. 0 1 1 Any message segmented in up to 8 LAPDm frames. 1 0 0 Any message segmented in up to 9 LAPDm frames. 1 0 1 Any message segmented in up to 10 LAPDm frames. 1 1 0 Any message segmented in up to 11 LAPDm frames. 1 1 1 Any message segmented in up to 12 LAPDm frames. Set by O&M. GPRS_MS_TXPWR_MAX_CCH (5 bits field) The GPRS_MS_TXPWR_MAX_CCH field is coded as the binary representation of the "power control level" in 3GPP TS 45.005 corresponding to the maximum TX power level the MS shall use for packet resources while in dual transfer mode. Range: 0 to 31. Set by BSCGP GPRS_MS_TXPWR_MAX_CCH. Cell identity (16 bits field) The purpose of the Cell Identity is to identify a cell within a routing area. Set by O&M. ED EVOLIUM 05 RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM INFORMATION 3BK 11203 0138 DSZZA 194/639

6.18 DTM REJECT


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION RADIO SDCCH/FACCH 44.018

DTM REJECT ABIS BTS Transparent A

This message is sent by the network to the mobile station to indicate that no radio resources are available for assignment. From: BSC To: MS INFORMATION ELEMENT NAME TYPE COMMENT LENGTH (byte) 2 1 3 TIMER

INFORMATION ELEMENT LIST

Header Wait Indication M V IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION ABNORMAL SITUATION

FOLLOWING EVENT

SPECIF DOC. REF.

See ref [41]

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM REJECT 3BK 11203 0138 DSZZA 195/639

6.18.1 GENERAL DESCRIPTION 8 7 6 0 0 5 0 0 4 0 1 3 1 0 2 1 0 1 0 1

0 0

0 1

Wait Indication

T3142 timeout value

6.18.2 WAIT INDICATION TYPE: M DEFINITION Time the mobile station shall wait before attempting another channel request. BIT DESCRIPTION Range 0-255 sec.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM REJECT 3BK 11203 0138 DSZZA 196/639

6.19 DTM REQUEST


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION RADIO SDCCH/FACCH 44.018

DTM REQUEST ABIS BTS Transparent A

This message is sent by the mobile station to request the establishment of dual transfer mode. From: MS To: BSC INFORMATION ELEMENT NAME TYPE COMMENT LENGTH (byte) 2 4 5-6 12 TIMER

INFORMATION ELEMENT LIST

Header TLLI Channel Request Description

M V M LV

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT ABNORMAL SITUATION

SPECIF DOC. REF.

See ref [42]

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM REQUEST 3BK 11203 0138 DSZZA 197/639

6.19.1 GENERAL DESCRIPTION 8 0 0 TLLI 7 0 1 6 0 0 5 0 0 TLLI 4 0 1 3 1 0 2 1 1 1 0 0

Channel Request Description

See detailed coding below.

Length

Channel Request Description detail description: Information elements PACKET_ESTABLISHME NT_CAUSE Length (bit) 2 4 2 1 16 1 7 1 1

PEAK_THROUGHPUT_C LASS RADIO_PRIORITY RLC_MODE LLC_ PDU_TYPE

RLC_OCTET_COUNT PFI

Multiple TBF Capability

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM REQUEST 3BK 11203 0138 DSZZA 198/639

6.19.2 TEMPORARY LOGICAL LINK IDENTIFIER (TLLI) TYPE: M DEFINITION To provide the Temporary Logical Link Identifier of the MS. The TLLI is encoded as a binary number with a length of 4 octets. Bit 8 of octet 1 is the most significant bit and bit. Bit 1 of octet 4 is the least significant bit. 8 7 6 5 4 TLLI value 3 2 1 octet 1 BIT DESCRIPTION

TLLI value (contd) TLLI value (contd) TLLI value (contd)

octet 2 octet 4 octet 3

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM REQUEST 3BK 11203 0138 DSZZA 199/639

6.19.3 CHANNEL REQUEST DESCRIPTION TYPE: M DEFINITION To indicate to the network the reason of the request to enter dual transfer mode. BIT DESCRIPTION See above. SUB PARAMETER DEFINITION PACKET_ESTABLISHMENT_CAUSE (2 bits field) This field indicates the reason for requesting the access. Bit 21 00 User Data 01 Page Response 10 Cell Update 11 Mobility Management procedure PEAK_THROUGHPUT_CLASS (4 bit field) This field indicates the peak throughput class for the PDP context of the LLC PDU that caused the Channel Request Description IE to be transmitted. The field is coded as the binary representation of the Peak Throughput Class specified in 3GPP TS 23.060. Range: 1 to 9 RADIO_PRIORITY (2 bit field) This field indicates the Radio Priority of the requested TBF. The field is encoded as the Radio Priority field of the Packet Channel Request RLC_MODE (1 bit field) This field indicates the RLC mode of the requested TBF. 0 RLC acknowledged mode 1 RLC unacknowledged mode LLC_ PDU_TYPE (1 bit field) This field indicates the type of the first LLC PDU to be transmitted over the requested uplink TBF. 0 LLC PDU is SACK or ACK 1 LLC PDU is not SACK or ACK RLC_OCTET_COUNT (16 bit field) The RLC_OCTET_COUNT field indicates the number of RLC data octets, plus the number of RLC data block length octets, that the mobile station wishes to transfer. The value '0' shall be interpreted as a request for an open-ended TBF by the mobile station. All other values shall be interpreted as a request for a close ended TBF. Range 0 to 65535

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM REQUEST 3BK 11203 0138 DSZZA 200/639

PFI (7 bits) indicates the Packet Flow Identifier for a Packet Flow Context. Bits 7654321 0 0 0 0 0 0 0 Best Effort 0 0 0 0 0 0 1 Signaling 0 0 0 0 0 1 0 SMS 0000011 to 0 0 0 0 1 1 1 reserved 0001000 to 1 1 1 1 1 1 1 dynamically assigned Multiple TBF Capability (1 bit field) This field is included as the MS Radio Access capabilities IE is not present and the Classmark 3 does not contain this information. Bit 0 Multiple TBF procedures in A/Gb mode not supported 1 Multiple TBF procedures in A/Gb mode supported

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE DTM REQUEST 3BK 11203 0138 DSZZA 201/639

6.20 E-GPRS PACKET CHANNEL REQUEST


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO RACH / PRACH 44.060 This message is sent by a mobile station supporting E-GPRS on the RACH (or on the PRACH for a cell supporting PCCCH) to perform an uplink access. The message is 11 bits long. DIRECTION From: MS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST See 3GPP-REF. IMPLEMENTATION MAXIMUM LENGTH (bit) NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. Establishment of an on-going TBF or allocation of one uplink radio block Radio and Link Establishment (ref. [2]) FBS GPRS - Radio Interface - RRM sublayer - PCC (ref. [29]) ABNORMAL SITUATION 11 TIMER To: BTS TYPE COMMENT LENGTH (bit) E-GPRS PACKET CHANNEL REQUEST ABIS A

6.20.1 GENERAL DESCRIPTION The EGPRS capability is indicated using alternative training sequence :
Training sequence (see 3GPP TS 05.02) bits 11...1 Packet Channel Access

TS1 TS2

< EGPRS Packet channel request EGPRS with 8PSK capability in uplink message content > < EGPRS Packet channel request EGPRS without 8PSK capability in uplink message content >

BIT DESCRIPTION One Phase Access Request 11 0 10 9 MultiSlot Class 8 7 6 5 Priority 4 3 Random Bits 2 1

Short Access Request ED EVOLIUM 05 RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE EGPRS PACKET CHANNEL REQUEST 3BK 11203 0138 DSZZA 202/639

11 1

10 0

Nb Of Blocks

Priority

Random Bits

Two-Phase Access Request 11 1 10 1 9 0 8 0 7 0 6 0 5 Priority 4 3 Random Bits 2 1

Signalling 11 1 10 1 9 0 8 0 7 1 6 1 5 4 Random Bits 3 2 1

SUB PARAMETER DEFINITION MultiSlot Class The Multi Slot Class field is coded as the binary representation of the multislot class defined in 3GPP TS 05.02. Bits 54321 00000 00001 11100 other

MultiSlot Class 1 MultiSlot Class 2 MultiSlot Class 29 Reserved values

Priority This information field indicates the requested Radio Priority. Bits 21 00 01 10 11

Radio Priority 1 (Highest priority) Radio Priority 2 Radio Priority 3 Radio Priority 4 (Lower priority)

Number Of Blocks This information field indicates the number of blocks requested during a mobile originated Temporary Block Flow. This field is coded as shown in the following table: Bits 321 000 001 111 Random bits This is an unformatted field of variable length of 3 bits PARAMETER ORIGIN - ACTION ON PARAMETER LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE EGPRS PACKET CHANNEL REQUEST 3BK 11203 0138 DSZZA 203/639

1 RLC data block 2 RLC data blocks 8 RLC data blocks

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

6.21 EXTENDED MEASUREMENT ORDER


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO SACCH 44.018

EXTENDED MEASUREMENT ORDER ABIS A

This message is sent on the SACCH by the network to the mobile station, to order the mobile station to send one extended measurement report. From: BTS INFORMATION ELEMENT NAME To: MS TYPE MV MV COMMENT LENGTH (byte) 2 16

DIRECTION

INFORMATION ELEMENT LIST

Header Extended Measurement Frequency List

IMPLEMENTATION MAXIMUM LENGTH (byte) NORMAL SITUATION FOLLOWING EVENT The MS supporting the MAFA feature answers with a single Extended Measurement Report, see ref. [12] for detail. Radio Measurements (ref. [12]) ABNORMAL SITUATION

18 TIMER

SPECIF DOC. REF.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE EXTENDED MEASUREMENT ORDER 3BK 11203 0138 DSZZA 204/639

6.21.1 GENERAL DESCRIPTION 8 0 0 Bit 128 Bit 120 Bit 008 7 0 0 Bit 127 Bit 119 Bit 007 6 0 1 0 spare Bit 118 Bit 006 5 0 1 SEQCODE Bit 117 Bit 005 4 0 0 Bit 124 Bit 116 Bit 004 3 1 1 Bit 123 2 1 1 Bit 122 1 0 1 Bit 121 Octet 1 Octet 2 Octet 3 Octet 4

Extended Measurement Frequency List

Bit 115 Bit 003

Bit 114 Bit 002

Bit 113 Bit 001

Octet 18

6.21.2 EXTENDED MEASUREMENT FREQUENCY LIST TYPE: M DEFINITION to provide the absolute radio frequency channel numbers of carriers to measure signal strength on. BIT DESCRIPTION The Extended Measurement Frequency List information element is coded as the Cell Channel Description information element, as described in 6.2.6, with the exception of bit 5 of octet 3. Bit 128 Bit 127 Bit 119 Bit 007 0 spare Bit 118 Bit 006 SEQCODE Bit 117 Bit 005 Bit 124 Bit 116 Bit 004 Bit 123 Bit 115 Bit 003 Bit 122 Bit 121 Octet 1 Octet 2

Bit 120 Bit 008

Bit 114 Bit 002

Bit 113 Bit 001

Octet 16

SUB PARAMETER DESCRIPTION Bit 5 of octet 1: SEQ-CODE (Sequence code) Range 0 to 1. PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE EXTENDED MEASUREMENT ORDER 3BK 11203 0138 DSZZA 205/639

6.22 EXTENDED MEASUREMENT REPORT


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO SACCH 44.018

EXTENDED MEASUREMENT REPORT ABIS A

This message is sent on the SACCH by the mobile station to the network to report extended measurement results about the signal strength on specified carriers. From: MS INFORMATION ELEMENT NAME To: BTS TYPE COMMENT LENGTH (byte) 2 16 18 TIMER

DIRECTION

INFORMATION ELEMENT LIST

Header Extended Measurement Results

MV

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT The BTS sends to the BSC the measurement results on the EMO frequencies given in the EXTENDED MEASUREMENT ORDER message, see ref. [12] for detail. Radio Measurements (ref. [12]) ABNORMAL SITUATION

SPECIF DOC. REF.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE EXTENDED MEASUREMENT REPORT 3BK 11203 0138 DSZZA 206/639

6.22.1 GENERAL DESCRIPTION 8 0 0 SC USED 7 0 0 DTX USED RXLEV carrier 1 RXLEV carrier 2 (low part) 6 0 1 5 0 1 4 0 0 3 1 1 2 1 1 1 0 0 Octet 1 Octet 2 Octet 3 RXLEV carrier 2 (high part) Octet 4 Octet 5 Octet 6 RXLEV carrier 6 (high part) Octet 7 Octet 8 Octet 9 RXLEV carrier 10 (high part) Octet 10 Octet 11 Octet 12 RXLEV carrier 14 (high part) Octet 13 Octet 14 Octet 15 RXLEV carrier 18 (high part) Octet 16 Octet 17 Octet 18

RXLEV carrier 0

RXLEV carrier 3 (low part)

RXLEV carrier 3 (high part) RXLEV carrier 4

RXLEV carrier 5 RXLEV carrier 6 (low part)

Extended Measurement Results

RXLEV carrier 7 (low part)

RXLEV carrier 7 (high part) RXLEV carrier 8

RXLEV carrier 9 RXLEV carrier 10 (low part)

RXLEV carrier 11 (low part)

RXLEV carrier 11 (high part) RXLEV carrier 12

RXLEV carrier 13 RXLEV carrier 14 (low part)

RXLEV carrier 15 (low part)

RXLEV carrier 15 (high part) RXLEV carrier 16

RXLEV carrier 17 RXLEV carrier 18 (low part)

RXLEV carrier 19 (low part)

RXLEV carrier 19 (high part) RXLEV carrier 20

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE EXTENDED MEASUREMENT REPORT 3BK 11203 0138 DSZZA 207/639

6.22.2 EXTENDED MEASUREMENT RESULTS TYPE: M DEFINITION To provide the results of the measurements made by the mobile station on the carriers specified in the EXTENDED MEASUREMENT ORDER. BIT DESCRIPTION SC USED DTX USED RXLEV carrier 1 RXLEV carrier 2 (low part) RXLEV carrier 0 RXLEV carrier 2 (high part) Octet 1 Octet 2 Octet 3 Octet 4 RXLEV carrier 6 (high part) Octet 5 Octet 6 Octet 7 RXLEV carrier 10 (high part) Octet 8 Octet 9 Octet 10 RXLEV carrier 14 (high part) Octet 11 Octet 12 Octet 13 RXLEV carrier 18 (high part) Octet 14 Octet 15 Octet 16

RXLEV carrier 3 (low part)

RXLEV carrier 3 (high part) RXLEV carrier 4

RXLEV carrier 5 RXLEV carrier 6 (low part)

RXLEV carrier 7 (low part)

RXLEV carrier 7 (high part) RXLEV carrier 8

RXLEV carrier 9 RXLEV carrier 10 (low part)

RXLEV carrier 11 (low part)

RXLEV carrier 11 (high part) RXLEV carrier 12

RXLEV carrier 13 RXLEV carrier 14 (low part)

RXLEV carrier 15 (low part)

RXLEV carrier 15 (high part) RXLEV carrier 16

RXLEV carrier 17 RXLEV carrier 18 (low part)

RXLEV carrier 19 (low part) SUB PARAMETER DEFINITION ED EVOLIUM 05 RELEASED

RXLEV carrier 19 (high part) RXLEV carrier 20

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE EXTENDED MEASUREMENT REPORT 3BK 11203 0138 DSZZA 208/639

SC USED:

The value of the SEQ-CODE in the extended measurement frequency list information element used for defining the list of frequencies reported on. Range: 0 to 1. This bit indicates whether or not the mobile station used DTX during the previous measurement period. Value 1 Value 0 : : DTX was used DTX was not used

DTX USED:

RXLEV carrier 'N':

This field is coded as the binary representation of a value M. M corresponds according to the mapping defined in TS. 3GPP TS 05.08 to the received signal strength on carrier N. N is the index to the frequency in the sorted list of frequencies defined in the EXTENDED MEASUREMENT ORDER message. The list is sorted in increasing order of ARFCN, except that ARFCN 0, if included in the EXTENDED MEASUREMENT ORDER, is put in the last position of the sorted list. If the EXTENDED MEASUREMENT ORDER contains more than 21 carriers, only the signal strength of the carriers 0-20 shall be measured and reported.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE EXTENDED MEASUREMENT REPORT 3BK 11203 0138 DSZZA 209/639

6.23 GPRS INFORMATION


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION RADIO SDCCH/FACCH 44.018

GPRS INFORMATION ABIS BTS Transparent A

This message is sent in acknowledged mode on the main DCCH in order to carry GPRS information in a transparent manner between the mobile station and the network. From: BSC / MS To: MS / BSC INFORMATION ELEMENT NAME TYPE COMMENT LENGTH (byte) 2 4 2-n 260 TIMER

INFORMATION ELEMENT LIST

Header TLLI LLC PDU

M V M LV IMPLEMENTATION MAXIMUM LENGTH ABNORMAL SITUATION

NORMAL SITUATION FOLLOWING EVENT

SPECIF DOC. REF.

See ref [43]

ED EVOLIUM

04

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE GPRS INFORMATION 3BK 11203 0138 DSZZA 210/639

6.23.1 GENERAL DESCRIPTION 8 0 TLLI LLC 0 7 0 0 6 0 0 5 0 0 TLLI Length 4 0 0 3 1 0 2 0 0 1 0 0

PDU

LLC PDU

6.23.2 TEMPORARY LOGICAL LINK IDENTIFIER (TLLI) TYPE: M DEFINITION To provide the Temporary Logical Link Identifier of the MS. The TLLI is encoded as a binary number with a length of 4 octets. Bit 8 of octet 1 is the most significant bit and bit. Bit 1 of octet 4 is the least significant bit. 8 7 6 5 4 TLLI value 3 2 1 octet 1 BIT DESCRIPTION

TLLI value (contd) TLLI value (contd) TLLI value (contd)

octet 2 octet 3 octet 4

6.23.3 LLC PDU TYPE: M DEFINITION Container for the LLC PDU received from the SGSN and sent to the MS, or received from the MS and sent to the SGSN. BIT DESCRIPTION The TLLI is encoded as a binary number with a length of 4 octets. Bit 8 of octet 1 is the most significant bit and bit. Bit 1 of octet 4 is the least significant bit. 8 7 6 5 Length 4 3 2 1 octet 1

LLC PDU

octet 2-n

ED EVOLIUM

04

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE GPRS INFORMATION 3BK 11203 0138 DSZZA 211/639

6.24 GPRS SUSPENSION REQUEST


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION RADIO SDCCH/FACCH 44.018

GPRS SUSPENSION REQUEST ABIS A

The MS sends this message to the network to request a suspension of GPRS services. From: MS INFORMATION ELEMENT NAME To: BTS TYPE COMMENT LENGTH (byte) 2 4 6 1 2 13 TIMER

INFORMATION ELEMENT LIST

Header TLLI MV Routing Area Identification MV Suspension cause MV O TV Not used Service Support IMPLEMENTATION MAXIMUM LENGTH (byte) NORMAL SITUATION ABNORMAL SITUATION

FOLLOWING EVENT SPECIF DOC. REF.

The BSC sends the MSSUSPEND message to the MFS. Radio and Link Establishment (ref. [2]) FBS GPRS - MFS-BSC interface - BSCGP layer (ref. [32]) FBS GPRS - Gb interface - BSSGP layer (ref. [33])

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE GPRS SUSPENSION REQUEST 3BK 11203 0138 DSZZA 212/639

6.24.1 GENERAL DESCRIPTION 8 0 0 7 0 0 6 0 1 5 0 1 4 0 0 3 1 1 2 1 0 1 0 0 Octet 1 Octet 2 Octet 3 Octet 4 Octet 6 Octet 5

TLLI

TLLI octet 1 TLLI octet 2 TLLI octet 3 TLLI octet 4 RAI octet 1 RAI octet 2

Routing Area Identification

RAI octet 4

RAI octet 3

RAI octet 5 RAI octet 6

Octet 10

Octet 9

Octet 7 Octet 8

Octet 11 Octet 12 Octet 13

Suspension cause

6.24.2 TEMPORARY LOGICAL LINK IDENTIFIER (TLLI) TYPE: M DEFINITION To provide the Temporary Logical Link Identifier of the MS. The TLLI is encoded as a binary number with a length of 4 octets. Bit 8 of octet 1 is the most significant bit and bit. Bit 1 of octet 4 is the least significant bit. 8 7 6 5 4 TLLI value 3 2 1 octet 1 BIT DESCRIPTION

TLLI value (contd) TLLI value (contd) TLLI value (contd)

octet 2 octet 3 octet 4

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE GPRS SUSPENSION REQUEST 3BK 11203 0138 DSZZA 213/639

6.24.3 ROUTING AREA IDENTIFICATION (RAI) TYPE: M DEFINITION To provide an unambiguous identification of routing areas within the GPRS coverage area. BIT DESCRIPTION 8 MCC digit 2 MNC digit 3 MNC digit 2 LAC 7 6 5 4 MCC digit 1 MCC digit 3 MNC digit 1 3 2 1 octet 1 octet 2 octet 3 octet 5 octet 4 octet 6

LAC cont'd RAC

SUB PARAMETER DEFINITION MCC (Mobile country code): MNC (Mobile network code): LAC (Location area code): RAC (Routing area code): The MCC field is coded as in ITU-T Rec. E212, Annex A. 3 digits MNC is supported. Note that in case where only two digits MNC is used, the field MNC Digit 3 shall be filled in with 1111. Bit 8 of octet 4 is the most significant bit and bit 1 of octet 5 the least significant bit. Bit 8 of octet 6 is the most significant. Coding using full hexadecimal

6.24.4 SUSPENSION CAUSE TYPE: M DEFINITION To provide the reason for the GPRS suspension. BIT DESCRIPTION 8 7 6 Suspension cause value 5 4 3 2 1 octet 1

SUB PARAMETER DEFINITION Suspension cause value: 87654321 00000000 00000001 00000010 00000011 ED EVOLIUM 05 Emergency call, mobile originating call or call reestablishment Location Area Update MO Short message service Other procedure which can be completed with an

Bits

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE GPRS SUSPENSION REQUEST 3BK 11203 0138 DSZZA 214/639

00000100 00000101 00000110

SDCCH MO Voice broadcast or group call Mobile terminating CS connection DTM not supported in the cell All other cause values shall be treated as 0000 0000

Not supported by the Alcatel BSS

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE GPRS SUSPENSION REQUEST 3BK 11203 0138 DSZZA 215/639

6.25 HANDOVER ACCESS


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO SDCCH/FACCH 44.018 This message is sent in random mode on the main DCCH during a Handover procedure. It does not follow the basic format. From: MS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST Handover reference To: BTS TYPE COMMENT Unformatted 8 bit field LENGTH (byte) 1 HANDOVER ACCESS ABIS A

DIRECTION

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. Internal Channel Changes External Channel Changes (ref. [6]) (ref. [7]) ABNORMAL SITUATION

1 TIMER T3106 T3105

6.25.1 GENERAL DESCRIPTION

Handover reference value Range 0 to 255 Range 0 to 127

Handover reference value:

Defined in GSM Alcatel Implementation

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER ACCESS 3BK 11203 0138 DSZZA 216/639

6.26 HANDOVER COMMAND


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION IE. LIST HANDOVER COMMAND ABIS BTS Transparent

RADIO SDCCH/FACCH

44.018 This message is sent on the main DCCH by the network to the MS to change the dedicated channel configuration. From: BSC To: MS INFORMATION ELEMENT NAME TYPE COMMENT LENGTH (byte) 2 Header 2 (10) M V Cell Description 3 M V Description of the 1st Channel, after time 1 M V Handover Reference 1 M V Power Command and access type 1 (4) O TV Synchronization Indication 10 (1) C TV Frequency Short List, after time 4-131 C TLV (1) Frequency List, after time 17 (5) C TV Cell Channel Description 3-12 C TLV Description of the multislot configuration 2 (3) O TV Mode of the 1st Channel (Channel Set 1) 2 Not used O TV Mode of Channel Set 2 2 Not used O TV Mode of Channel Set 3 2 Not used O TV Mode of Channel Set 4 2 Not used O TV Mode of Channel Set 5 2 Not used O TV Mode of Channel Set 6 2 Not used O TV Mode of Channel Set 7 2 Not used O TV Mode of Channel Set 8 4 Not used O TV Description of the 2nd Channel, after time 2 Not used O TV Mode of the 2nd Channel 10 (6) C TV Frequency Channel Sequence, after time 3-10 CTLV (7) Mobile Allocation,after time 3 Not used O TV Starting time 3 C TLV Not used Real Time Difference 2 Not Used C TV Timing Advance Not Used 10 C TV Frequency Short List, before time 4-131 C TLV Not Used Frequency List, before time 4 Not Used O TV Description of the 1st Channel, before time Not Used 4 O TV Channel Description, 2nd channel before 10 C TV Not Used time 3-10 C TLV Not Used Frequency Channel Sequence, before time (2) 1 O TV Mobile Allocation, before time 3 O TLV Not Used Cipher Mode Setting 4-8 O TLV (9) VGCS target mode Indication 6-34 O TLV Not Used MultiRate configuration 3-15 O TLV Not Used Dynamic ARFCN Mapping 2 Not Used O TV VGCS Ciphering Parameters Dedicated Service Information IMPLEMENTATION MAXIMUM LENGTH (8) NORMAL SITUATION Access on new channel ABNORMAL SITUATION No access TIMER T8

FOLLOWING EVENT

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 217/639

SPECIF DOC. REF.

Internal Channel Changes External Channel Changes

(ref. [6]) (ref. [7])

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 218/639

(1) Used in the two following cases: i) Used for Phase 2 biband MS when the assigned channel is hopping in the P-GSM band if it is the shortest way to encode the hopping frequencies or ii) used for any MS when the assigned channel is hopping in the E-GSM (and not P-GSM), GSM850, DCS1800 or DCS1900 band if it is the shortest way to encode the hopping frequencies. (2) Internal handover: Sent only if cipher algorithm is changed in a phase 2 MS. External handover: - Phase 1 MSs: never sent - Phase 2 MSs: - if chosen encryption is the same as the one used on the old channel (*): not sent - Otherwise (chosen encryption is different or not known) : sent. (*)Note: This information is given in the OIE chosen encryption algorithm (serving) sent by the MSC in HO_REQUEST. (3) Always included, although optional. (4) Phase 2 MS: Only included in case of synchronous handover, Phase 1 MS: Always included as required in GSM ETR 09.94. (5) Used for Phase 1 monoband P-GSM MS or for Phase 2 monoband P-GSM or for Phase 2 monoband E-GSM MS when the assigned channel is hopping in the P-GSM band and the Frequency Channel Sequence, after time IE cannot encode all the hopping frequencies. (6) Used in the two following cases: i) Used for Phase 1 monoband P-GSM MS or for Phase 2 monoband P-GSM or for Phase 2 monoband E-GSM MS when the assigned channel is hopping in the P-GSM band and this IE can encode all the hopping frequencies or ii) used for Phase 2 biband MS when the assigned channel is hopping in the P-GSM band if it is the shortest way to encode the hopping frequencies. (7) Used for Phase 1 monoband P-GSM MS or for Phase 2 monoband P-GSM or for Phase 2 monoband E-GSM MS when the assigned channel is hopping in the P-GSM band and the Cell Channel Description IE is used. (8) The length depends on the type of target channel, on the maximum number of frequencies (64 frequencies) and of the MS type:
MS band capability Frequency band of the allocated radio resource P-GSM Max. length of the Assignment Command message 50 Comments

PGSM

With Cell Channel Description + Mobile Allocation With Range_512 With Range_512 With variable bitmap

DCS1800 or DCS1800-GSM850 or DCS1800-GSM900 DCS1900 or DCS1900-GSM850 E-GSM, GSM850, GSM850-DCS1800, or GSM850-DCS1900

DCS1800 DCS1900 GSM850

67 67 41

(9) This field is only included for calls established with AMR codec. (10)The target cell belongs to either an own PLMN or to a foreign PLMN.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 219/639

6.26.1 GENERAL DESCRIPTION 6.26.1.1 Assigned channel in the P-GSM band 6.26.1.1.1 Phase 1 monoband P-GSM MS The assigned channel is assumed hopping on more than one frequency in the P-GSM band. a) Case the Frequency Channel Sequence, after timer IE is used 8 0 0 Cell Description 7 0 0 6 1 0 5 0 0 4 1 0

3 0 1

2 1 1

BCCH ARFCN (High Part)

NCC BCCH ARFCN (Low part) H=1->

BCC

Channel type and TDMA offset Channel TSC MAIO low part H=0->

MAIO (high part) HSN spare ARFCN (Hpart)

TN

Description Handover reference Power Command Sync. Ind. Channel Mode Frequency Sequence Cipher Mode Setting Channel

A R F C N (low part) 0 0 1 1 1 0 Mode 0 NCI 0 1

HANDOVER REFERENCE ATC 1 0 0 0 1 1 1 Power level ROT 0 0 1 0 SI 1 1 optional optional optional

inc skip of ARFCN 1 inc skip of ARFCN 15

Lowest ARFCN

inc skip of ARFCN 2

inc skip of ARFCN 16 1 Algorithm identifier SC optional

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 220/639

Or b) Case the Cell Channel Description IE is used 8 0 Cell Description 0 7 0 0 6 1 0 5 0 0 4 1 0 3 1 0 2 1 1 BCC TN 1 0 1

BCCH ARFCN (High Part)

NCC BCCH ARFCN (Low part) H=1->

Channel type and TDMA offset Channel Description Handover reference Power Command Sync. Ind. ATC 1 0 0 1 1 0 0 1 0 1 0 0 NCI 0 TSC MAIO low part H=0->

MAIO (high part) spare HSN ARFCN (Hpart)

A R F C N (low part)

HANDOVER REFERENCE Power level ROT 123 0 122 1 SI 121 Optional 17 octets 0 optional

Cell Channel Description

0 0 FORMAT-ID 120 008 0 0 MA C 8n MA C 8 1 007 1 1 MA C 8n-1

124 CA ARFCN CA ARFCN ......................... ........... CA ARFCN 005 004 0 0 1 Mode 0

113 003 0 0 002 1 1 001 1 0 MA C 8n-7 MA C 1 SC

Channel Mode Mobile Allocation

006 1 1

optional

Length (value 8)

Conditional 3-10 octets

Cipher Mode Setting

Algorithm identifier

optional

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 221/639

6.26.1.1.2 Phase 2 monoband P-GSM or E-GSM MS The assigned channel is assumed hopping on more than one frequency in the P-GSM band. a) Case the Frequency Channel Sequence, after timer IE is used 8 0 0 Cell Description Description of the first channel, after time 7 0 0 6 1 0 5 0 0 4 1 0 3 0 1 2 1 1 1

BCCH ARFCN (High Part)

NCC BCCH ARFCN (Low part) H=1->

BCC TN

Channel type and TDMA offset TSC MAIO low part H=0->

MAIO (high part) HSN spare ARFCN (Hpart)

A R F C N (low part) FPC_E PC 0 0 DA 6 UA 6 1 1

Handover reference Power Command and Access type Sync. Ind. Description of the multislot configuration ATC 1 0 0 ext 1 ext 0 0 Frequency Channel Sequence, after time EPC mode 1 0 DA 7 UA 7 1 1

HANDOVER REFERENCE Power level 1 1 NCI ROT 0 DA 3 UA 3 0 0 0 DA 2 UA 2 1 0 SI 0 DA 1 UA 1 1 1 optional Optional optional

Mode of the First Channel (Channel Set 1)

0 Length DA DA 5 4 UA UA 5 4 0 0 Mode 0 1

optional

inc skip of ARFCN 1 inc skip of ARFCN 15

Lowest ARFCN

inc skip of ARFCN 2

inc skip of ARFCN 16 1 0 NSCB Algorithm identifier 0 ICMI 0 spare 1 SC 1 optional optional

Cipher Mode Setting MultiRate configuration (Note)

1 0

0 0

0 0

Length (value 6 ) Multirate speech version Parameters for MultiRate speech (1-5 octets) Start mode

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 222/639

Note: Or

This field is only included for calls established with AMR codec.

b) Case the Cell Channel Description IE is used 8 7 0 0 0 0 BCCH ARFCN (High Part) 6 0 1 5 0 0 NCC 4 0 1 3 1 0 2 1 1 BCC TN 1 0 1

Cell Description Description of the first channel, after time

BCCH ARFCN (Low part) Channel type and TDMA offset TSC H=1-> H=0->

MAIO low part

A R F C N (low part) FPC_E PC 0 1 0

MAIO (high part) spare ARFCN (Hpart) HSN

Handover reference Power Command and Access type Sync. Ind. ATC 1 0 EPC mode 1 1

HANDOVER REFERENCE Power level 1 0 0 NCI 0 ROT 123 0 122 1 SI 121 Optional 17 octets 0 optional

Cell Channel Description

0 0 FORMAT-ID 120 008 0 007 0 DA 7 UA 7 1 1 MA C 8n-1

124 CA ARFCN CA ARFCN ......................... ........... CA ARFCN 005 004 1 0 Length DA DA 5 4 UA UA 5 4 0 0 Mode 1 0

113 003 0 DA 3 UA 3 0 0 002 0 DA 2 UA 2 1 1 001 0 DA 1 UA 1 1 0 MA C 8n-7 MA C 1

006 0 DA 6 UA 6 1 1

Description of the multislot configuration Mode of the First Channel (Channel Set 1)

0 ext 1 ext 0 0

Optional

optional

Mobile Allocation, after time

MA C 8n MA C 8

Length (value 8)

Conditional 3-10 octets

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 223/639

Cipher Mode Setting MultiRate configuration (Note)

1 0

0 0

0 0

1 0 NSCB

Algorithm identifier 0 ICMI 0 spare 1

SC 1

optional optional

Length (value 6) Multirate speech version Parameters for MultiRate speech (1-5 octets) Start mode

Note:

This field is only included for calls established with AMR codec.

6.26.1.1.3 Phase 2 biband MS For phase 2 iband MS the shortest frequency encoding IE will always be used. The choice will be made between the following CIEs: - Frequency Channel Sequence, after time (as in section 6.26.1.1.2), - "Frequency Short List, after time" (as in section 6.26.1.2), - "Frequency List, after time" (as in section 6.26.1.2).

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 224/639

6.26.1.2 Assigned channel in the E-GSM, GSM850, DCS1800 or DCS1900 band The assigned channel is assumed hopping on more than one frequency in the E-GSM, GSM850, DCS1800, DCS1900 band. a) Case the Frequency Short List IE is used 0 0 0 0 BCCH ARFCN (High Part) 8 7 6 0 1 0 0 NCC 5 4 0 1 3 1 0 1 1 BCC 2 0 1 1

Cell Description Description of the first channel, after time Handover reference Power Command and Access type Sync. Ind.

BCCH ARFCN (Low part) Channel type and TDMA offset TN TSC H=1-> MAIO (high part) H=0-> spare ARFCN (Hpart) HSN A R F C N (low part) HANDOVER REFERENCE FPC_E Power level PC 0 1 NCI ROT 0 0 0 0 1 0 0 FORMAT-ID (continued) Note 1

MAIO low part ATC EPC mode 1 1 0 0 1 0 FORMAT-ID

SI

Frequency Short List ,after time (10 octets) Description of the multislot configuration

Cipher Mode Setting MultiRate configuration (Note 2)

ORIG-ARFCN (middle part) ORIG- RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFC ARFCN 1 2 3 4 5 6 N (low) 7 .. .. .. RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN 48 49 50 51 52 53 54 55 0 0 0 1 0 0 0 0 Length 0 DA DA DA DA DA DA DA ext 7 6 5 4 3 2 1 1 UA UA UA UA UA UA UA ext 7 6 5 4 3 2 1 1 0 0 1 Algorithm identifier SC 0 0 0 0 0 0 1 1 Length (value 6 ) Multirate speech version Parameters for MultiRate speech (1-5 octets) NSCB ICMI spare Start mode

0 ORIGARFCN high

optional

optional

Optional

optional optional

Note 1: 0 x x: Range 1024 format; 1 0 0: Range 512 format; 1 0 1: Range 256 format; 1 1 0: Range 128 format; 1 1 1: Variable bit map. ED EVOLIUM 05 RELEASED LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 225/639

0138_05.doc 15/02/2008

Note 2:

This field is only included for calls established with AMR codec.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 226/639

Or b) Case the Frequency List IE is used 8 0 0 7 0 0 6 0 1 5 0 0 4 0 1 3 1 0 2 1 1 0 1

Cell Description Description of the first channel, after time

BCCH ARFCN (High Part)

NCC

BCC TN

Channel type and TDMA offset TSC H=0-> H=1->

BCCH ARFCN (Low part)

MAIO low part

Power Command and Access type Sync. Ind.

Handover reference

ATC 1 0

EPC mode 1 01

FPC_E PC 0 01 0

HANDOVER REFERENCE 1 NCI 0

A R F C N (low part)

HSN

spare

MAIO (high part)

ARFCN (Hpart)

Power level ROT 10 01 SI 10 optional

1 0 FORMAT-ID List ,after time Frequency

Length of frequency list contents 0 1

Note 1 Description of the configuration multislot

RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN 8k-40 8k-39 8k-38 8k-37 8k-36 8k-35 8k-34 0 0 ext 1 ext 1 0 0 DA 7 UA 7 0 0 0 DA 6 UA 6 0 0 1 Length 0 0 0

ORIG- RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN ARFCN 1 2 3 4 5 6 (low) .. ..

1 1 FORMAT-ID (continued) ORIG-ARFCN (middle part)

ORIGARFCN high RRFC N 7 .. RRFC N 8k-33 0 DA 1 UA 1 SC 1

optional

Cipher Mode Setting MultiRate configuration (Note)

DA 5 UA 5 1 0

DA DA DA 4 3 2 UA UA UA 4 3 2 Algorithm identifier 0 0 1

Optional

optional optional

Length (value 6 ) Multirate speech version Parameters for MultiRate speech (1-5 octets) NSCB ICMI spare Start mode

Notes : 1) k indicates the octet number of the I.E. Frequency List, after time. k 131.2) 2) This field is only included for calls established with AMR codec. ED EVOLIUM 05 RELEASED LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 227/639

0138_05.doc 15/02/2008

6.26.2 CELL DESCRIPTION TYPE: M DEFINITION To provide a minimum description of a cell, to allow the MS to use its pre knowledge about synchronization. BIT DESCRIPTION 7 BCCH ARFCN (High Part) 8 6 5 NCC BCCH ARFCN (Low part) 4 3 2 BCC 1

SUB PARAMETER DEFINITION BCCH ARFCN NCC BCC The BCCH ARFCN number field is coded as the binary representation of the BCCH carriers absolute RF channel number. (value 0 to 1023) PLMN Colour Code (The NCC field is coded as a binary representation of the PLMN colour code) BS Colour Code (The BCC field is coded as a binary representation of the BS colour code)

PARAMETER ORIGIN - ACTION ON PARAMETER NCC, BCC : defined during BSC configuration (NCC+BCC defines the BSIC) depends on where is located the BCCH ARFCN Number

BCCH Carrier :

All this information is given to the BSC by O&M and is transparent to the BTS.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 228/639

6.26.3 Channel Description / CHANNEL DESCRIPTION - Phase 1 TYPE: M DEFINITION To provide a description of an allocatable channel together with its SACCH. BIT DESCRIPTION 8 Channel type and TDMA offset TSC MAIO low part H=1-> H=0-> 7 6 5 4 3 TN 2 1 1

MAIO (high part) ARFCN (Hpart)

spare HSN A R F C N (low part)

SUB PARAMETER DEFINITION Octet 1 Channel type and TDMA offset. Bits 8 7 6 5 4 0 0 0 0 1 TCH/F + ACCHs 0 0 0 1 T TCH/H + ACCHs 0 0 1 T T SDCCH/4 + SACCH/C4 or CBCH (SDCCH/4) 0 1 T T T SDCCH/8 + SACCH/C8 or CBCH (SDCCH/8) all other values are reserved. T bit indicates the Subchannel Number. TN : Time slot (0 to 7) Octets 2 and 3: TSC : Training Sequence Code (0 to 7) H : "0" Single RF channel "1" RF hopping channel

Channel selector: H = "0": The channel selector field consists of the absolute RF channel number. Bits 4 3 0 0 spare ARFCN: Octet2 Octet 3 Bits 2,1 High part of ARFCN Bits 8 to 1 ARFCN low part

The ARFCN is coded as the binary representation of the absolute RF channel Number. Range 0 to 1023. ED EVOLIUM 05 RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 229/639

H = "1": MAIO:

The channel selector field consists of the mobile allocation index offset, MAIO, and the hopping sequence number, HSN. Bits 4 to 1 High part Bits 8 to 7 Low part

Octet 2 Octet 3

HSN (Octet 3, Bits 1 to 6): Value 0 to 63. The HSN field is coded as the binary representation of the hopping sequence number. PARAMETER ORIGIN - ACTION ON PARAMETER This parameter is transparent for the BTS when received. At the BSC site, the BSC has to provide the following information: Channel type and TDMA offset and TN depends of the resource to be allocated by the resource manager. H: fixed value according if hopping is used or not (this information has to be provided by O&M). Channel selector.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 230/639

6.26.4 Description of the first channel, after time / CHANNEL DESCRIPTION 2 - Phase 2 TYPE: M DEFINITION To provide a description of an allocatable channel together with its SACCH. BIT DESCRIPTION 8 Channel type and TDMA offset TSC MAIO low part H=1-> H=0-> 7 6 5 4 3 TN 2 1 1

MAIO (high part) ARFCN (Hpart)

spare HSN A R F C N (low part)

SUB PARAMETER DEFINITION Octet 1 Channel type and TDMA offset. Bits 8 7 6 5 4 0 0 0 0 0 TCH/F + FACCH/F and SACCH/M at the timeslot indicated by TN, and additional bidirectional or undirectional TCH/Fs and SACCH/Ms according to the multislot allocation information element 0 0 0 0 1 TCH/F + FACCH/F and SACCH/F 0 0 0 1 T TCH/H + ACCHs 0 0 1 T T SDCCH/4 + SACCH/C4 or CBCH (SDCCH/4) 0 1 T T T SDCCH/8 + SACCH/C8 or CBCH (SDCCH/8) In the description below "n" is the timeslot number indicated by TN. The description is valid only if all the indicated timeslot numbers are in the rang 0 to 7. TCH/F + FACCH/F and SACCH/M at the time slot indicated by TN, 10XXX and additional bidirectional TCH/Fs and SACCH/Ms at other timeslots according to the following: X X X: 0 0 0 no additional timeslots 0 0 1 at timeslot n-1 0 1 0 at timeslot n+1, n-1 0 1 1 at timeslot n+1, n-1 and n-2 1 0 0 at timeslot n+1, n-1, n-2, and n-3 1 0 1 at timeslot n+1, n-1, n-2, n-3 and n-4 1 1 0 at timeslot n+1, n-1, n-2, n-3, n-4 and n-5 1 1 1 at timeslot n+1, n-1, n-2, n-3, n-4, n-5 and n-6 11001 TCH/F + FACCH/F and SACCH/M at the time slot indicated by TN to and additiona unidirectional TCH/FDs and SACCH/MDs at other 11011 timeslots according to the following: 11001 at timeslot n-1 11010 at timeslot n+1, n-1 11011 at timeslot n+1, n-1 and n-2 11110 TCH/F + FACCH/F and SACCH/M at the time slot indicated by TN and additional bidirectional TCH/F and SACCH/M at timeslot n+1 and unidirectional TCH/FD and SACCH/MD at timeslot n-1 All other values are reserved. T bit indicates the Subchannel Number ED EVOLIUM 05 RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 231/639

TN : Time slot (0 to 7) Octets 2 and 3: TSC : Training Sequence Code (0 to 7) H : "0" Single RF channel "1" RF hopping channel

Channel selector: H = "0": The channel selector field consists of the absolute RF channel number. Bits 4 3 0 0 spare ARFCN: Octet 2 Octet 3 Bits 2,1 Bits 8 to 1 High part of ARFCN ARFCN low part

The ARFCN is coded as the binary representation of the absolute RF channel Number. Range 0 to 1023. H = "1": MAIO: Octet 2 Octet 3 Bits 4 to 1 High part Bits 8 to 7 Low part The channel selector field consists of the mobile allocation index offset, MAIO, and the hopping sequence number, HSN.

HSN (Octet 3, Bits 1 to 6): Value 0 to 63. The HSN field is coded as the binary representation of the hopping sequence number. PARAMETER ORIGIN - ACTION ON PARAMETER This parameter is transparent for the BTS when received. At the BSC site, the BSC has to provide the following information: Channel type and TDMA offset and TN depends of the resource to be allocated by the resource manager. H: fixed value according if hopping is used or not (this information has to be provided by O&M). Channel selector.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 232/639

6.26.5 HANDOVER REFERENCE TYPE: M DEFINITION To provide an Handover reference value used for access identification. BIT DESCRIPTION 8 7 6 5 4 3 2 1

HANDOVER REF. VALUE

SUB PARAMETER DEFINITION Handover reference value: Binary coding. Range 0 to 255 Range 0 to 127 Defined in GSM Alcatel Implementation.

PARAMETER ORIGIN - ACTION ON PARAMETER The old BSC is transparent on this parameter (this information is given to the old BSC by MSC in the Handover Command message). This reference has been allocated by the new BSC during Handover initialisation (refer to Handover Request Ack message).

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 233/639

6.26.6 POWER COMMAND AND ACCESS TYPE TYPE: M DEFINITION To provide the power level for the Mobile Station BIT DESCRIPTION 8 7 6 5 4 3 2 1

ATC

EPC mode

FPC_ EPC

Power level

SUB PARAMETER DEFINITION ATC (Access Type Control) 0 Sending of Handover access is mandatory 1 Sending of Handover access is optional supported. not supported.

EPC_mode The EPC mode field indicates whether the assigned channel(s) shall be in enhanced power control (EPC) mode. It is only valid for channels on which EPC may be used. It is coded as follows: 0 Channel(s) not in EPC mode 1 Channel(s) in EPC mode, not used FPC_EPC The FPC_EPC field (octet 2) has different interpretation depending on the channel mode of the assigned channed(s) and the value of the EPC mode field. If the channel mode is such that fast power control (FPC) may be used, the FPC_EPC field indicates whether Fast Measurement Reporting and Power Control mechanism is used. It is coded as follows: 0 FPC not in use 1 FPC in use, not used If the channel mode is such that EPC may be used and the EPC mode field indicates that the channel is in EPC mode, the FPC_EPC field indicates whether EPC shall be used for uplink power control. It is coded as follows: 0 EPC not in use for uplink power control, not used 1 EPC in use for uplink power control, not used Power level GSM phase 1 Power Control level 0 1 2 3 4 5 ED EVOLIUM 05 Peak power 43 dBm 41 dBm 39 dBm 37 dBm 35 dBm 33 dBm RELEASED GSM-900 Binary value 0 1 2 3 4 5 Peak power 30 dBm 28 dBm 26 dBm 24 dBm 22 dBm 20 dBm DCS-1800 Binary value 0 1 2 3 4 5 : binary representation of the power control level (0 to 31)

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 234/639

6 7 8 9 10 11 12 13 14 15

31 dBm 29 dBm 27 dBm 25 dBm 23 dBm 21 dBm 19 dBm 17 dBm 15 dBm 13 dBm

6 7 8 9 10 11 12 13 14 15

18 dBm 16 dBm 14 dBm 12 dBm 10 dBm 8 dBm 6 dBm 4 dBm

6 7 8 9 10 11 (note 1) 12 (note 1) 13 (note 1)

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 235/639

GSM phase 2 Power Control level 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Power Control level 30 31 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 GSM-900 DCS-1800 Peak power Binary value Peak power Binary value 30 dBm 0 28 dBm 1 39 dBm 2 26 dBm 2 37 dBm 3 24 dBm 3 35 dBm 4 22 dBm 4 33 dBm 5 20 dBm 5 31 dBm 6 18 dBm 6 29 dBm 7 16 dBm 7 27 dBm 8 14 dBm 8 25 dBm 9 12 dBm 9 23 dBm 10 10 dBm 10 21 dBm 11 8 dBm 11 19 dBm 12 6 dBm 12 17 dBm 13 4 dBm 13 15 dBm 14 2 dBm 14 13 dBm 15 0 dBm 15 11 dBm 16 9 dBm 17 7 dBm 18 5 dBm 19 DCS-1900 Peak power 33dBm 32dBm 30dBm 28dBm 26 dBm 24 dBm 22 dBm 20 dBm 18 dBm 16 dBm 14 dBm 12 dBm 10 dBm 08 dBm 06 dBm 04 dBm 02 dBm 0 dBm GSM-850 Peak Power Binary value 39 dBm 2 37 dBm 3 35 dBm 4 33 dBm 5 31 dBm 6 29 dBm 7 27 dBm 8 25 dBm 9 23 dBm 10 21 dBm 11 19 dBm 12 17 dBm 13 15 dBm 14 13 dBm 15 11 dBm 16 9 dBm 17 7 dBm 18 5 dBm 19

Note 1: These power control levels are not authorised for MS DCS-1800 class 1. They are only used by the MS class 2. PARAMETER ORIGIN - ACTION ON PARAMETER The parameter is transparent for the BTS. At the BSC site, this parameter is given to the mobile station according to the classmark information received from the MS.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 236/639

6.26.7 SYNCHRONIZATION INDICATION TYPE: O DEFINITION To indicate whether the new cell is synchronised with the old cell or not. BIT DESCRIPTION 8 1 7 1 6 0 5 1 4 0 3 0 2 0 1

SI

Phase 1

bits 2, 3, 4 are spare bits. 8 1 7 1 6 0 5 1 NCI 4 ROT 3 2 SI 1 Phase 2

SUB PARAMETER DEFINITION Phase 1 Si Value Phase 2 SI Value "0" "1" "0 0" "0 1" "1 0" "1 1"

Synchronised Non synchronised (default value) Synchronised Pre-Synchronised Pseudo-Synchronised

not supported not supported

ROT

Report Observed Time difference "0" Time difference IE shall not be included in the HANDOVER COMPLETE message. "1" Time difference IE shall be included in the HANDOVER COMPLETE message. Normal Cell Indication "0" Out of range timing advance is ignored (default value). "1" Out of range timing advance triggers a handover failure procedure.

NCI

PARAMETER ORIGIN - ACTION ON PARAMETER The fact that Cells are synchronised or not synchronised is operator dependent. The parameter is optional but required for the Alcatel BSS implementation (O&M choice), the value non synchronised is the default value.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 237/639

6.26.8 FREQUENCY SHORT LIST TYPE: C DEFINITION To provide the absolute radio frequency channel numbers used in a cell (fixed length frequency list). BIT DESCRIPTION Range 1024 format 8 0 7 0 supported 6 0 0 5 0 0 4 0 3 F0 0 2 1 1 0 1

1 0 FORMAT-ID

0 FORMID W(1) (low part) :

W(1) (high part)

2 3

W(2) to W(3) are on 9 bits, when present W(4) to W(7) are on 8 bits, when present W(8) to W(15) are on 7 bits, when present W(16) to W(31) are on 6 bits, when present W(2k) to W(2(k+1)- 1) are on 10-k bits Range 512 format 8 0 7 0 supported 6 0 0 5 0 0 4 0 1 3 0 2 1 1 ORIGARFCN 0 1

1 0 FORMAT-ID ORIGARFCN (low) W(1) (low part)

0 0 FORMAT-ID (continued) ORIG-ARFCN (middle part) W(1) (high part) W(2) (high part) :

3 4 5

W(2) to W(3) are on 8 bits, when present W(4) to W(7) are on 7 bits, when present W(8) to W(15) are on 6 bits, when present W(16) to W(31) are on 5 bits, when present W(2k) to W(2(k+1)- 1) are on 9-k bits

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 238/639

Range

256 format 8 0 7 0

supported 6 0 0 5 0 0 4 0 1 3 0 2 1 1 ORIGARFCN 0 1

1 0 FORMAT-ID ORIGARFCN (low) W(1) (low part)

0 1 FORMAT-ID (continued) ORIG-ARFCN (middle part) W(1) (high part) W(2) :

3 4 5

W(2) to W(3) are on 7 bits, when present W(4) to W(7) are on 6 bits, when present W(8) to W(15) are on 5 bits, when present W(16) to W(31) are on 4 bits, when present W(2k) to W(2(k+1)- 1) are on 8-k bits Range 128 format 8 0 7 0 supported 6 0 0 5 0 0 4 0 1 3 0 2 1 1 ORIGARFCN 0 1

1 0 FORMAT-ID ORIGARFCN (low)

1 0 FORMAT-ID (continued) ORIG-ARFCN (middle part) W(1) :

3 4

W(2) to W(3) are on 6 bits, when present W(4) to W(7) are on 5 bits, when present W(8) to W(15) are on 4 bits, when present W(16) to W(31) are on 3 bits, when present W(2k) to W(2(k+1)- 1) are on 7-k bits

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 239/639

Variable bit map format 8 0 7 0

supported 6 0 0 5 0 0 4 0 1 3 0 2 1 1 0 1

1 1 ORIGFORMAT-ID ARFCN (continued) high ORIG-ARFCN (middle part) ORIG- RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN ARFCN 1 2 3 4 5 6 7 (low) : : RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN 48 49 50 51 52 53 54 55 Bits 5 and 6 are spare bits in octet 2. SUB PARAMETER DEFINITION FORMAT-ID F0 : Format identifier.

1 0 FORMAT-ID

3 4

10

: Frequency 0 indicator. Coded 0 if ARFCN 0 is not a member of the set. Coded 1 if ARFCN 0 is a member of the set.

ORIG-ARFCN : This field encodes the ARFCN of one frequency belonging to the set. This value is also used as the origin of the bit map to generate all the other frequencies. RRFCN N: Relative radio frequency channel number N - For an RF channel with ARFCN = (ORIG-ARFCN + N) mod 1024 belonging to the set, then RRFCN N bit is coded as '1'. - For an RF channel with ARFCN = (ORIG-ARFCN + N) mod 1024 not belonging to the set, then RRFCN N bit is coded as '0'. W : Each non null W(k) allows to compute, together with some previous W(i) the ARFCN F(k) of a frequency in the set (see 3GPP TS 44.018 for computation formulas).

PARAMETER ORIGIN - ACTION ON PARAMETER ORIG-ARFCN, RRFCN N : Values stored reconfigurations. in BSC and updated according to system

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 240/639

6.26.9 FREQUENCY LIST TYPE: C DEFINITION To provide the absolute radio frequency channel numbers used in a cell. BIT DESCRIPTION Bit map 0 format 8 0 supported but not used 7 0 6 0 5 0 4 0 3 1 2 0 1 1 1 3 4 18

0 0 0 0 ARFCN ARFCN ARFCN ARFCN FORMAT-ID 123 122 124 121 ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN 120 119 118 117 116 115 114 113 : : ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN 008 007 006 005 004 003 002 001

Length of frequency list contents =16

Range 1024 format 8 0 7 0

supported 6 0 5 0 4 0 3 1 2 0 1 1 1 3 4

1 0 FORMAT-ID

Length of frequency list contents 0 0 FORMID W(1) (low part) : 0 F0

W(1) (high part)

W(2) to W(3) are on 9 bits, when present W(4) to W(7) are on 8 bits, when present W(8) to W(15) are on 7 bits, when present W(16) to W(31) are on 6 bits, when present W(2k) to W(2(k+1)- 1) are on 10-k bits when present

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 241/639

Range

512 format 8 0 7 0

supported 6 0 5 0 4 0 3 1 2 0 1 1 ORIGARFCN 1 3 4 5 6

1 0 FORMAT-ID

Length of frequency list contents 0 0 1

0 0 FORMAT-ID (continued) ORIG-ARFCN (middle part) W(1) (high part) W(2) (high part) :

ORIGARFCN (low) W(1) (low part)

W(2) to W(3) are on 8 bits, when present W(4) to W(7) are on 7 bits, when present W(8) to W(15) are on 6 bits, when present W(16) to W(31) are on 5 bits, when present W(2k) to W(2(k+1)- 1) are on 9-k bits when present

Range

256 format 8 0 7 0

supported 6 0 5 0 4 0 3 1 2 0 1 1 ORIGARFCN 1 3

1 0 FORMAT-ID ORIGARFCN (low) W(1) (low part)

Length of frequency list contents 0 0 1

0 1 FORMAT-ID (continued) ORIG-ARFCN (middle part) W(1) (high part) W(2) :

4 5 6

W(2) to W(3) are on 7 bits, when present W(4) to W(7) are on 6 bits, when present W(8) to W(15) are on 5 bits, when present W(16) to W(31) are on 4 bits, when present W(2k) to W(2(k+1)- 1) are on 8-k bits when present

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 242/639

Range

128 format 8 0 7 0

supported 6 0 5 0 4 0 3 1 2 0 1 1 ORIGARFCN 1 3

1 0 FORMAT-ID

Length of frequency list contents 0 0 1

1 0 FORMAT-ID (continued) ORIG-ARFCN (middle part) W(1) :

4 5

ORIGARFCN (low)

W(2) to W(3) are on 6 bits, when present W(4) to W(7) are on 5 bits, when present W(8) to W(15) are on 4 bits, when present W(16) to W(31) are on 3 bits, when present W(2k) to W(2(k+1)- 1) are on 7-k bits when present

Variable bit map format 8 0 7 0

supported 5 4 3 0 0 1 Length of frequency list contents 0 0 1 1 spare spare FORMAT-ID (continued) ORIG-ARFCN (middle part) RRFCN 2 RRFCN 3 RRFCN 4 RRFCN 5 6 0 2 0 1 1 1 ORIGARFCN high RRFCN 7 1 2 3 4 5

1 0 FORMAT-ID ORIGARFC N low RRFC N 8k-40

RRFCN 1

RRFCN 6

RRFCN 8k-39

RRFCN 8k-38

RRFCN 8k-37

RRFCN 8k-36

RRFCN 8k-35

RRFCN 8k-34

RRFCN 8k-33

k indicates the octet number of the I.E. k 131.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 243/639

SUB PARAMETER DEFINITION Bits 5 and 6 are spare bits in octet 3. FORMAT-ID F0 : Format identifier.

: Frequency 0 indicator. Coded 0 if ARFCN 0 is not a member of the set. Coded 1 if ARFCN 0 is a member of the set. : This field encodes the ARFCN of one frequency belonging to the set. This value is also used as the origin of the bit map to generate all the other frequencies.

ORIG-ARFCN

RRFCN N : Relative radio frequency channel number N - For an RF channel with ARFCN = ORIG-ARFCN + N) mod 1024 belonging to the set, then RRFCN N bit is coded as '1'. - For an RF channel with ARFCN = (ORIG-ARFCN + N) mod 1024 not belonging to the set, then RRFCN N bit is coded as '0'. W : Each non null W(k) allows to compute, together with some previous W(i) the ARFCN F(k) of a frequency in the set (see 3GPP TS 44.018 for computation formulas).

PARAMETER ORIGIN - ACTION ON PARAMETER ORIG-ARFCN, RRFCN N : Values stored reconfigurations. in BSC and updated according to system

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 244/639

6.26.10 CELL CHANNEL DESCRIPTION TYPE: C DEFINITION To provide the reference frequency list to be used to decode the mobile allocation information element.

BIT DESCRIPTION Bitmap 0 format 8 0 0 7 1 0 6 1 0 5 0 0 4 0 124 3 0 2 1 1 0 121 113 003 002 001 1

FORMAT-ID 120 008 007

CA ARFCN ......................... ........... 006 CA ARFCN 005 004

123

CA ARFCN

122

2 3

17

Bits 5 and 6 are spare bits in octet 2. SUB PARAMETER DEFINITION FORMAT-ID : Format identifier Only bitmap 0 Format is supported.

CA ARFCN N : Cell Allocation Absolute Radio Frequency Channel Number N CA ARFCN N : "0" not belonging to the cell allocation "1" belonging to the cell allocation PARAMETER ORIGIN - ACTION ON PARAMETER Format-ID: Fixed value = 00. CA ARFCN N : Value stored in BSC and updated according to system reconfigurations. NOTE : Only the Bit map 0 format is used (on a dedicated channel in HANDOVER COMMAND for SDCCH or P-GSM TCH in GSM900).

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 245/639

6.26.11 MULTISLOT ALLOCATION TYPE: C DEFINITION To provide a description of which channels are used in downlink and uplink respectively, in a multislot configuration. BIT DESCRIPTION 8 0 7 0 6 0 5 1 0 4 3 0 2 0 1 0 1

Length = 1 DA 5 5 DA 4 4

2 3

1 ext Or 8

DA 7 7

DA 6 6

DA 3 3

DA 2 2

DA 1 1

Length = 2 DA 5 UA 5 DA 4 UA 4

2 3

0 ext 1 ext

DA 7 UA 7

DA 6 UA 6

DA 3 UA 3

DA 2 UA 2

DA 1 UA 1

3a

SUB PARAMETER DEFINITION Octet 3 DA 1-7: Indicates additional downlink channel allocation.If bit DA n is set to "1" this indicates that timeslot TN = (n + TNm)mod8 is assigned. If bit DA n is set to "0" the corresponding timeslot is not assigned. TNm is the timeslot number of the main link.

Octet 3a UA 1-7: Indicates additional uplink channel allocation.If bit UA n is set to "1" this indicates that timeslot TN = (n + TNm)mod8 is assigned. If bit UA n is set to "0" the corresponding timeslot is not assigned. TNm is the timeslot number of the main link. If octet 3a is not included the timeslots indicated by octet 3 are allocated in both downlink and uplink direction

Note:

PARAMETER ORIGIN - ACTION ON PARAMETER The BSC has to provide the information: DA 1-7. The BSC can provide optionally the information: UA 1-7.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 246/639

6.26.12 CHANNEL MODE TYPE: O DEFINITION The channel mode information element gives the mode of encoding, decoding and transcoding. BIT DESCRIPTION 8 0 7 1 6 1 5 0 mode 4 0 3 0 2 1 1 1

SUB PARAMETER DEFINITION The mode field is encoded as follows: Bits 87654321 00000000 00000001 00100001 01000001 10000001 10000010 10000011 01100001 01100010 01100100 01100111 01100101 01100110 00100111 01100011 01000011 00001111 00000011 00001011 00010011 signaling only speech (full rate or half rate version 1) speech (full rate or half rate version 2) speech (full rate or half rate version 3) speech (full rate or half rate version 4) speech (full rate or half rate version 5) speech (full rate or half rate version 6) data, 43.5 kbit/s (downlink)+14.5 kbps (uplink) data, 29.0 kbit/s (downlink)+14.5 kbps (uplink) data, 43.5 kbit/s (downlink)+29.0 kbps (uplink) data, 14.5 kbit/s (downlink)+43.5 kbps (uplink) data, 14.5 kbit/s (downlink)+29.0 kbps (uplink) data, 29.0 kbit/s (downlink)+43.5 kbps (uplink) data, 43.5 kbit/s radio interface rate data, 32.0 kbit/s radio interface rate data, 29.0 kbit/s radio interface rate data 14.5 kbit/s radio interface rate data 12 kbit/s radio interface rate data 6 kbit/s radio interface rate data 3.6 kbit/s radio interface rate All other values are reserved and not supported.

not supported not supported not supported not supported not supported not supported not supported not supported not supported not supported not supported not supported

PARAMETER ORIGIN - ACTION ON PARAMETER This parameter is deduced from the A interface Channel type Info element. Data rates received on the A interface which are lower than 2.4 kbit/s are mapped onto the "data 3.6 kbit/s radio interface rate" in this element.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 247/639

6.26.13 FREQUENCY CHANNEL SEQUENCE TYPE: C DEFINITION To provide the absolute radio frequency channel numbers used in the Mobile Hopping Sequence. This parameter will be always used instead of Mobile Allocation, and cell channel description elements (primary band of GSM900). BIT DESCRIPTION 8 7 6 5 4 3 2 1

1 2 3 10

0 0 :

inc skip of ARFCN 1 inc skip of ARFCN 15

Lowest ARFCN

inc skip of ARFCN 2

inc skip of ARFCN 16

Bit 8 of octet 2 is spare. SUB PARAMETER DEFINITION Lowest ARFCN: Value x: 1 to 124 this field is coded as the binary representation of the lowest absolute RF channel, appearing in the sequence of channels used in frequency hopping. inc skip of ARFCN n: this field is coded as the binary representation of the Increment of preceding absolute RF channel number appearing in the sequence of channels used in the frequency hopping n = 1,...,16. Range: 0 to 15 The value 0 means a increment of 15, but the concerned channel is not used and the next field (i.e. Increment skip ARFCN N+1) if present must be added to the increment to determine the next absolute RF channel number. PARAMETER ORIGIN - ACTION ON PARAMETER Same as Mobile Allocation and cell channel description. Stored and updated during system reconfiguration.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 248/639

6.26.14 MOBILE ALLOCATION, after time TYPE C DEFINITION To provide the part of the RF channels belonging to the cell allocation which is used in the Mobile Station hopping sequence (primary band in GSM900). BIT DESCRIPTION 8 0 MA C 8n : 7 1 MA C 8n-1 6 1 5 1 4 0 3 0 2 1 1 0 MA C 8n-7 : MA C 001

length of Mobile allocation contents (value 8 )

MA C 008 SUB PARAMETER DEFINITION

MA length depends on the relative frequency span of the frequencies in the cell allocation frequency list.

MA Ci: Mobile Allocation RF Channel i - the RF channels represented in the MA C i bit fields are those which in the "Cell Channel Description" information element are coded with "1" in the CA ARFCN N bit fields. MA Ci = CA ARFCN N(i) i = 1,2...NF

(NF = Number of Frequencies in the CA frequency list). For a RF channel belonging to the Mobile Allocation the MA C i bit is coded with a "1", for a RF channel not belonging to the Mobile Allocation, the MA C i bit is coded with a "0".If NF mod 8 <> 0 then bits NF to 8n in octet 3 must be coded with a "0" in each. PARAMETER ORIGIN - ACTION ON PARAMETER The parameter is transparent for the BTS when received from the BSC. At the BSC site the following actions have to be performed Mobile Allocation Stored and Updated during system reconfiguration.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 249/639

6.26.15 CIPHER MODE SETTING TYPE: O DEFINITION The purpose of the cipher mode setting information element is to indicate whether stream ciphering shall be started or not. When ciphering is started, it indicates the algorithm to be used (except for GSM phase 1 MS). BIT DESCRIPTION 8 1 7 0 6 0 5 1 4 3 2 1

Algorithm identifier

SC

SUB PARAMETER DEFINITION Algorithm Identifier If SC = 1 then: Bits 432 000 001 010 011 100 101 110 111 Cipher with algorithm A5/1 Cipher with algorithm A5/2 Cipher with algorithm A5/3 Cipher with algorithm A5/4 Cipher with algorithm A5/5 Cipher with algorithm A5/6 Cipher with algorithm A5/7 Reserved

Not supported in this release Not supported in this release Not supported in this release Not supported in this release Not supported in this release Not supported in this release

Bits 2, 3 and 4 are always set to 0 for GSM Phase 1 MS. SC bit: "0": No ciphering "1": Start ciphering

PARAMETER ORIGIN - ACTION ON PARAMETER According to the ciphering procedure scenario, the value 0 is used when no ciphering is needed.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 250/639

6.26.16 MULTIRATE CONFIGURATION TYPE: O DEFINITION : The MultiRate configuration information element gives all parameters related to a MultiRate speech codec. BIT DESCRIPTION 8 0 7 0 6 0 5 0 4 0 3 0 2 1 1 1 octet 1 octet 2 spare Start mode octet 3 octet 4 . . octet n (n 8) SUB PARAMETER DEFINITION Octet 3 MultiRate speech version: Bits 8 7 6 0 0 1 0 1 0

Length

Multirate speech version

NSCB

ICMI

Parameters for MultiRate speech

Adaptive MultiRate speech version 1 Adaptive MultiRate speech version 2 all other values are reserved Note: The Adaptive Multirate speech versions are also referred as follows (see 3GPP TS 26.103): - Adaptive Multirate speech version 1: FR AMR, HR AMR or OHR AMR; - Adaptive Multirate speech version 2: FR AMR-WB, OFR AMR-WB or OHR AMR-WB; Only FR AMR, HR AMR and FR AMR-WB are supported. NSCB (Noise Suppression Control Bit): Bit 5 0 Noise Suppression can be used (default) 1 Noise Suppression shall be turned off ICMI (Initial Codec Mode Indicator): Bit 4 0 The initial codec mode is defined by the implicit rule provided in 3GPP TS 45.009 1 The initial codec mode is defined by the Start Mode field Bit 3 0 Spare Start Mode: Bits 21 xx The initial codec mode is coded as in 3GPP TS 45.009 section 3.4.1

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 251/639

Parameters for MultiRate speech (octet 4 to octet n, n 8):

1) Parameters for MultiRate speech field for the Multirate speech version 1 when a set with one codec mode is chosen 8 7 6 5 4 3 2 1 octet 4

Set of AMR codec modes

2) Parameters for MultiRate speech field for the Multirate speech version 1 when a set with two codec modes is chosen 8 Spare 7 6 5 4 3 2 1 octet 4 Spare octet 5 0 0 octet 6

Set of AMR codec modes 0 Hysteresis 1 Threshold 1 0 0

3) Parameters for MultiRate speech field for the Multirate speech version 1 & 2 when a set of three codec modes is chosen 8 Spare 7 6 5 4 3 2 1 octet 4 octet 5 Spare octet 6 0 octet 7

Set of AMR codec modes 0 Threshold 1 Threshold 2 Hysteresis 2 0

Hysteresis 1 Threshold 2 (cont.)

4) Parameters for MultiRate speech field for the Multirate speech version 1 when a set of four modes is chosen 8 Spare 7 6 5 4 3 2 1 octet 4 octet 5 octet 6 octet 7 octet 8

Set of AMR codec modes 0 Threshold 1 Threshold 2 Threshold 3 Hysteresis 3

Hysteresis 1 Threshold 2 (cont.) Threshold (3)

Hysteresis 2

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 252/639

Set of adaptive MultiRate codec modes field for Multirate speech version 1 (octet 4) Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 12,2 kbit/s codec rate is not part of the subset 12,2 kbit/s codec rate is part of the subset 10,2 kbit/s codec rate is not part of the subset 10,2 kbit/s codec rate is part of the subset 7,95 kbit/s codec rate is not part of the subset 7,95 kbit/s codec rate is part of the subset 7,40 kbit/s codec rate is not part of the subset 7,40 kbit/s codec rate is part of the subset 6,70 kbit/s codec rate is not part of the subset 6,70 kbit/s codec rate is part of the subset 5,90 kbit/s codec rate is not part of the subset 5,90 kbit/s codec rate is part of the subset 5,15 kbit/s codec rate is not part of the subset 5,15 kbit/s codec rate is part of the subset 4,75 kbit/s codec rate is not part of the subset 4,75 kbit/s codec rate is part of the subset

Set of adaptive MultiRate codec modes field for Multirate speech version 2 (octet 4) Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 0 0 0 0 1 0 1 0 spare spare spare 23.85 kbit/s codec rate is not part of the subset; 23.85 kbit/s codec rate is part of the subset (not supported); 15.85 kbit/s codec rate is not part of the subset; 15.85 kbit/s codec rate is part of the subset (not supported); 12.65 kbit/s codec rate is not part of the subset (not supported); 12.65 kbit/s codec rate is part of the subset; 8.85 kbit/s codec rate is not part of the subset (not supported); 8.85 kbit/s codec rate is part of the subset; 6.60 kbit/s codec rate is not part of the subset (not supported); 6.60 kbit/s codec rate is part of the subset;

1 0 1 0 1

Threshold j (6 bits), see Note 1

Hysteresis j (4 bits), see Note 1

Coded as the binary representation of a value N. N corresponds to the threshold of C/I in dB, as defined in 3GPP TS 45.009; Coded as the binary representation of the hysteresis value associated to THRj, as defined in 3GPP TS 45.009.

Note 1: j = 1 corresponds to the lowest value of threshold in dB, j = 2 to the second lowest, j = 3 to the highest value.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMMAND 3BK 11203 0138 DSZZA 253/639

6.27 HANDOVER COMPLETE


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO SDCCH/FACCH 44.018

HANDOVER COMPLETE ABIS BTS Transparent A

This message is sent on the main DCCH from Mobile Station to the network to indicate that the Mobile Station has established the main signalling link successfully. From: MS INFORMATION ELEMENT NAME To: BSC TYPE COMMENT LENGTH (byte) 2 1 5 3 TIMER T3013 T9013

DIRECTION

INFORMATION ELEMENT Header LIST RR Cause Mobile Observed Time Difference

MV O TLV

not used

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. Release of old channels ABNORMAL SITUATION Handover failure (ref. [6]) (ref. [7])

Internal Channel Changes External Channel Changes

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMPLETE 3BK 11203 0138 DSZZA 254/639

6.27.1 GENERAL DESCRIPTION 8 0 0 RR Cause 7 0 0 6 0 1 5 0 0 4 0 1 3 1 1 2 1 0 1 0 0

RR CAUSE VALUE

6.27.2 RR CAUSE TYPE: M DEFINITION To provide the reason for handover complete. BIT DESCRIPTION 8 7 6 5 4 3 2 1

RR CAUSE VALUE

SUB PARAMETER DEFINITION RR cause value (octet 1) PARAMETER ORIGIN - ACTION ON PARAMETER This parameter is transparent for the BTS. The BSC does not check the value given by the MS. The BSC gives this information to the MSC in the "Handover Complete" message on the A Interface.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER COMPLETE 3BK 11203 0138 DSZZA 255/639

6.28 HANDOVER FAILURE


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO SDCCH/FACCH 44.018

HANDOVER FAILURE ABIS BTS Transparent A

This message is sent on the main DCCH on the old channel from the Mobile Station to the network to indicate that the Mobile Station has failed to seize the new channel. From: MS INFORMATION ELEMENT NAME To: BSC TYPE COMMENT LENGTH (byte) 2 1 3 TIMER

DIRECTION

INFORMATION ELEMENT LIST

Header RR Cause

M V IMPLEMENTATION MAXIMUM LENGTH

NORMAL SITUATION FOLLOWING EVENT

ABNORMAL SITUATION

T3103 T8

SPECIF DOC. REF.

Internal Channel Changes External Channel Changes

(ref. [6]) (ref. [7])

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER FAILURE 3BK 11203 0138 DSZZA 256/639

6.28.1 GENERAL DESCRIPTION 8 0 RR Cause 0 7 0 0 6 0 1 5 0 0 4 0 1 3 1 0 2 1 0 1 0 0

RR CAUSE VALUE

6.28.2 RR CAUSE TYPE: M DEFINITION To provide the reason for handover failure. BIT DESCRIPTION 8 7 6 5 4 3 2 1

RR CAUSE VALUE

SUB PARAMETER DEFINITION The RR cause value (octet 1) PARAMETER ORIGIN - ACTION ON PARAMETER This parameter is transparent to the BSS The BSC does not check the value given by the MS. The BSC gives this information to the MSC in the "Handover Failure" message on the A Interface.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE HANDOVER FAILURE 3BK 11203 0138 DSZZA 257/639

6.29 IMMEDIATE ASSIGNMENT


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO CCCH/(AGCH-PCH) 44.018

IMMEDIATE ASSIGNMENT ABIS A

This message is sent on the CCCH by the network to the MS in idle mode to change the channel configuration to dedicated configuration while staying in the same cell or to allocate resources for uplink or downlink packet data transfer. From: BTS INFORMATION ELEMENT NAME To: MS TYPE MV MV MV MV CV CV MV MV M LV O TV MV COMMENT LENGTH (byte) 1 2 3 3 3 1 1-9 3 0-11 23 TIMER

DIRECTION

INFORMATION ELEMENT LIST

L2 Pseudo Length Header Page mode Dedicated mode or TBF Channel Description Packet Channel Description Request Reference Timing Advance Mobile Allocation Starting Time IA Rest Octets

Not Used

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT ABNORMAL SITUATION

Access to main DCCH or completion of establishment of Temporary Block Flow for data transfer

Release resources if MS does T3101 (for not access the new channel CS service or retries establishment of only) downlink TBF

SPECIF DOC. REF.

Paging and Access Grant Control (ref. [1]) Radio and link establishment (ref. [2]) FBS GPRS - Radio Interface - RRM sublayer - PCC

(ref. [29])

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE ASSIGNMENT 3BK 11203 0138 DSZZA 258/639

6.29.1 GENERAL DESCRIPTION 6.29.1.1 CS Assignment 8 L2 Pseudo length 0 0 Page Mode & Dedicated mode or TBF 0 Spare 0 0 0 TMA 7 6 0 1
downlink

5 0 1 0 T/D H=1->

4 0 1 0 Spare

3 1 1 0 Spare

2 0 1 1

1 1 0 1

L2 Pseudo Length

Page Mode TN

Channel type and TDMA offset TSC MAIO low part H=0->

Channel Description Request

spare

MAIO (high part)

HSN ARFCN (Low part) T1' RA T2

ARFCN (High Part)

Reference Timing Advance Mobile Allocation 0 MA C 8n :

T3 Low part 0 MA C 8n-1

T3 High Part

Timing Advance Value Length of mobile allocation contents 8 MA C 8n-7 :

IA Rest Octets

MA C 8 P=0

: :

0 spare 0 spare

0 spare 0 spare

Compr essed_I nter_R AT_HO _INFO_ IND 1 spare 1 spare

0 spare

1 spare

0 spare

1 spare

MA C 1 1 spare

0 spare 0 spare

1 spare 1 spare

0 spare 0 spare

1 spare 1 spare

1 spare 1 spare

: :

The length of the message is always 23 octets, therefore the length of the IA rest octets depends on the length of the mobile allocation.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE ASSIGNMENT 3BK 11203 0138 DSZZA 259/639

6.29.1.2 PS assignment 8 L2 Pseudo length 0 0 Page Mode & Dedicated mode or TBF 0 Spare

7 0 0 0 TMA

6 0 1
downlink

5 0 1 1 T/D

4 0 1 0 Spare

3 1 1 0 Spare

2 0 1 1

1 1 0 1

L2 Pseudo Length

Page Mode

Packet Channel Description Request

See FBS GPRS - Radio Interface - RRM sublayer - PCC (ref. [31]) RA T2

Field dedicated to the GPRS service

Reference Timing Advance Mobile Allocation 0 MA C 8n :

T3 Low part 0 MA C 8n-1

T1'

T3 High Part

Timing Advance Value Length of mobile allocation contents <= 8 MA C 8n-7 : MA C 1

MA C 8 IA Rest Octets

See FBS GPRS - Radio Interface - RRM sublayer - PCC (ref. [29])

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE ASSIGNMENT 3BK 11203 0138 DSZZA 260/639

6.29.2 L2 PSEUDO LENGTH TYPE: M DEFINITION This information element indicates the number of octets following it in the message which are to be interpreted in the scope of phase 1 protocol. BIT DESCRIPTION 8 7 6 5 4 3 2 1

L2 Pseudo Length value

PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE ASSIGNMENT 3BK 11203 0138 DSZZA 261/639

6.29.3 PAGE MODE / Dedicated mode or TBF TYPE: M DEFINITION Page Mode

Dedicated mode or TBF

To control the action of the Mobile Station belonging to the paging subgroup corresponding to the paging subchannel. Indicates to the mobile station whether the rest of the message shall be decoded as an IMMEDIATE ASSIGNMENT message allocating a channel in dedicated mode or whether the rest of the message shall be decoded as the allocation of a Temporary Block Flow. This IE also indicates:

whether the IMMEDIATE ASSIGNMENT message identifies a mobile station in the IA Rest Octets information elements for the assignment of a downlink TBF; and whether the IMMEDIATE ASSIGNMENT message is the first message of two IMMEDIATE ASSIGNMENT messages in a two-message assignment of an uplink or downlink TBF

BIT DESCRIPTION 0 0 downlink T/D spare TMA |____________________________| Dedicated mode or TBF SUB PARAMETER DEFINITION Page Mode Page Mode Description 00 Normal paging 01 Extended paging 10 Paging - Reorganisation 11 Same as before 8 7 6 5 0 0 Page Mode spare spare |_______________________| Page Mode 4 3 2 1

used for PS assignments Not used Not used used for CS assignments

Dedicated mode or TBF T/D : TBF or dedicated mode. Downlink : Downlink TBF assignment to the mobile station identified in the IA Rast Octets IE. TMA : Two-message assignment.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE ASSIGNMENT 3BK 11203 0138 DSZZA 262/639

TMA 0 0 1 1 0 0 1 1

downlink 0 1 0 1 0 1 0 1

T/D 0 0 0 0 1 1 1 1

Description This message assigns a dedicated mode resource. Not used. Not used. Not used. This message assigns an uplink TBF or is the second message of two in a two-message assignment of an uplink or downlink TBF. This message assigns a downlink TBF to the mobile station identified in the IA Rest Octets IE. This message is the first message of two in a two-message assignment of an uplink TBF. Not used. This message is the first message of two in a two-message assignment of a downlink TBF to the mobile station identified in the IA Rest Octets IE. Not used.

PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE ASSIGNMENT 3BK 11203 0138 DSZZA 263/639

6.29.4 CHANNEL DESCRIPTION TYPE: C DEFINITION To provide a description of an allocatable channel together with its SACCH. BIT DESCRIPTION 8 Channel type and TDMA offset TSC MAIO low part H=1-> H=0-> 7 6 5 4 3 TN 2 1 1

MAIO (high part) ARFCN (Hpart)

spare HSN A R F C N (low part)

SUB PARAMETER DEFINITION Octet 1 Channel type and TDMA offset. Bits 8 7 6 5 4 0 0 0 0 1 TCH/F + ACCHs 0 0 0 1 T TCH/H + ACCHs 0 0 1 T T SDCCH/4 + SACCH/C4 or CBCH (SDCCH/4) 0 1 T T T SDCCH/8 + SACCH/C8 or CBCH (SDCCH/8) all other values are reserved. T bit indicates the Subchannel Number. TN : Time slot (0 to 7) Octets 2 and 3: TSC : Training Sequence Code (0 to 7) H : "0" Single RF channel "1" RF hopping channel

Channel selector: H = "0": The channel selector field consists of the absolute RF channel number. Bits 4 3 0 0 spare ARFCN: Octet 2 Octet 3 Bits 2,1 High part of ARFCN Bits 8 to 1 ARFCN low part

The ARFCN is coded as the binary representation of the absolute RF channel Number. Range 0 to 1023. ED EVOLIUM 05 RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE ASSIGNMENT 3BK 11203 0138 DSZZA 264/639

H = "1":

The channel selector field consists of the mobile allocation index offset, MAIO, and the hopping sequence number, HSN. Bits 4 to 1 High part Bits 8 to 7 Low part

MAIO: Octet 2 Octet 3

HSN (Octet 3, Bits 1 to 6) Value 0 to 63. The HSN field is coded as the binary representation of the hopping sequence number. PARAMETER ORIGIN - ACTION ON PARAMETER This parameter is transparent for the BTS when received. At the BSC site, the BSC has to provide the following information: Channel type and TDMA offset and TN depends of the resource to be allocated by the resource manager. H: fixed value according if hopping is used or not (this information has to be provided by O&M). Channel selector.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE ASSIGNMENT 3BK 11203 0138 DSZZA 265/639

6.29.5 PACKET CHANNEL DESCRIPTION TYPE: C DEFINITION To provide a description of a Packet Data Physical Channel (PDCH). BIT DESCRIPTION / SUB PARAMETER DEFINITION See FBS GPRS - Radio Interface - RRM sublayer - PCC (ref. [31]) PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE ASSIGNMENT 3BK 11203 0138 DSZZA 266/639

6.29.6 REQUEST REFERENCE TYPE: M DEFINITION To provide the random access number used in the channel request and the frame number, FN modulo 42432 in which the channel request was received. BIT DESCRIPTION 8 7 6 T1' T3 Low part SUB PARAMETER DEFINITION RA Random Number When set to the value 0111 1111, the RA information of the Request Reference IE indicates that an Extended RA field may be included in the IA Rest Octets. The mobile station shall use the information in the Extended RA field to identify the Immediate Assignment message corresponding to an EGPRS Packet Channel Request message. T1', T3, T2 Starting time information element T1': binary representation of (FN div 1326) mod 32 T3: " " FN mod 51 T2: " " FN mod 26 FN mod 42432 = 51 x ((T3 - T2) mod 26) + T3 + 51 x 26 x T1' In case the IMMEDIATE ASSIGNMENT message conveys a downlink TBF establishment, the RA bits are set to 101xxxxx to avoid that a MS considers the message as an answer to a request sent on the RACH channel. PARAMETER ORIGIN - ACTION ON PARAMETER RA: This information comes from the MS in Channel Required message addressed by the BTS. It is used to allow the MS to recognise its own request among those sent by the BSC at the same time. T1', T3, T2 are also stored from Channel Required message Time of arrival (in terms of Frame Number) of the Access Burst given by the BTS in the Channel Required message. 5 4 3 2 T3 High part 1

RA

T2

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE ASSIGNMENT 3BK 11203 0138 DSZZA 267/639

6.29.7 TIMING ADVANCE TYPE: M DEFINITION To provide Timing Advance value BIT DESCRIPTION 8 0 Bits 7, 8 are spare bits. SUB PARAMETER DEFINITION Binary representation of the timing advance in bit periods (1 bit period 48/13 s). In case the IMMEDIATE ASSIGNMENT message conveys a downlink TBF establishment, the timing advance value is set to 0 as it is not known. The IMMEDIATE ASSIGNMENT REST OCTET indicates that the mobile station shall consider the field as not valid. PARAMETER ORIGIN - ACTION ON PARAMETER The access delay is stored by the BSC and sent to the MS as Timing advance. 7 0 6 5 4 3 2 1

Timing Advance Value

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE ASSIGNMENT 3BK 11203 0138 DSZZA 268/639

6.29.8 MOBILE ALLOCATION TYPE: M DEFINITION To provide the part of the RF channels belonging to the cell allocation which is used in the Mobile Station hopping sequence. BIT DESCRIPTION 8 MA C 8n MA C 8 SUB PARAMETER DEFINITION MA length depends on the relative frequency span of the frequencies in the cell allocation frequency list 7 MA C 8n-1 6 5 4 3 2 1 MA C 8n-7 MA C 1 Length of Mobile alloc. contents 8

MA Ci: Mobile Allocation RF channel i - the RF channels represented in the MA Ci bit fields are those which in the cell channel description information element are coded with "1" in the CA ARFCN N bit fields. MA Ci = CA ARFCN N(i) i = 1,2...NF

(NF = Number of Frequencies in the CA frequency list). For a RF channel belonging to the Mobile Allocation the MA Ci bit is coded with a "1", for a RF channel not belonging to the Mobile Allocation, the MA Ci bit is coded with a "0". PARAMETER ORIGIN - ACTION ON PARAMETER The parameter is transparent for the BTS when received from the BSC. Note: mandatory if Frequency Hopping system in used, otherwise if not sent the length is 0

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE ASSIGNMENT 3BK 11203 0138 DSZZA 269/639

6.29.9 IA REST OCTETS TYPE: M DEFINITION The IA rest octet information element contains spare bits and possibly either a packet uplink assignment construction, a packet downlink assignment construction, a second part packet assignment construction or a frequency parameters, before time. BIT DESCRIPTION <IA Rest Octets> ::= { LL < Compressed_Inter_RAT_HO_INFO_IND > | LH { 00 < EGPRS Packet Uplink Assignment > | 01 < Multiple Blocks Packet Downlink Assignment > | 1 -- reserved for future use (however the value 7C for the first octet shall not be used) } | HL < Length of frequency parameters : bit string (6) > < Frequency Parameters, before time > < Compressed_Inter_RAT_HO_INFO_IND > | HH { 00 < Packet Uplink Assignment > | 01 < Packet Downlink Assignment > | 1 < Second Part Packet Assignment > } } <spare padding> ; < EGPRS Packet Uplink Assignment > : := < Extended RA : bit (5) > { 0 | 1 < Access Technologies Request : Access Technologies Request struct > } {1 < TFI_ASSIGNMENT : bit (5) > < POLLING : bit > 0 < USF: bit (3) > < USF_GRANULARITY : bit > { 0 | 1 < P0 : bit (4) > < PR_MODE : bit (1) >} < EGPRS CHANNEL_CODING_COMMAND : < EGPRS Modulation and Coding IE>> < TLLI_BLOCK_CHANNEL_CODING : bit (1) > { 0 | 1 < BEP_PERIOD2 : bit (4) > } < RESEGMENT : bit (1) > < EGPRS Window Size : < EGPRS Window Size IE>> { 0 | 1 < ALPHA : bit (4) >} < GAMMA : bit (5) > { 0 | 1 < TIMING_ADVANCE_INDEX : bit (4) > } { 0 | 1 < TBF_STARTING_TIME : bit (16) > } |0 -- Multi Block Allocation { 0 | 1 < ALPHA : bit (4) > } < GAMMA : bit (5) > < TBF_STARTING_TIME : bit (16) > < NUMBER OF RADIO BLOCKS ALLOCATED : bit (2) > { 0 | 1 < P0 : bit (4) > 0 < PR_MODE : bit (1) > } { null | L |H LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE ED 05 RELEASED IMMEDIATE ASSIGNMENT EVOLIUM
0138_05.doc 15/02/2008

3BK 11203 0138 DSZZA

270/639

};

{ 0 | 1 < PFI : bit (7) > }

<Access Technologies Request struct> ::= -- recursive structure allows any combination of Access technologies <Access Technology Type : bit (4)> { 0 | 1 <Access Technologies Request struct> } ; < Packet Uplink Assignment > ::= < TFI_ASSIGNMENT : bit (5) > < POLLING : bit > 0 -- Dynamic Allocation < USF: bit (3) > < USF_GRANULARITY : bit > { 0 | 1 < P0 : bit (4) > < PR_MODE : bit (1) > } < CHANNEL_CODING_COMMAND : bit (2) > < TLLI_BLOCK_CHANNEL_CODING : bit > { 0 | 1 < ALPHA : bit (4) > } < GAMMA : bit (5) > { 0 | 1 < TIMING_ADVANCE_INDEX : bit (4) > } { 0 | 1 < TBF_STARTING_TIME : bit (16) > } |0 -- Single Block Allocation { 0 | 1 < ALPHA : bit (4) >} < GAMMA : bit (5) > 01 See Note 1 < TBF_STARTING_TIME : bit (16) > { L | H < P0 : bit (4) > 0 < PR_MODE : bit (1) >} } { null | L |H { 0 | 1 < Extended RA : bit (5) > } } { null | L |H { 0 | 1 < PFI : bit (7) > } } < Packet Downlink Assignment > ::= < TLLI : bit (32) > {0|1 < TFI_ASSIGNMENT : bit (5) > < RLC_MODE : bit > { 0 | 1 < ALPHA : bit (4) > } < GAMMA : bit (5) > < POLLING : bit > < TA_VALID : bit (1) > } { 0 | 1 < TIMING_ADVANCE_INDEX : bit (4) > } { 0 | 1 < TBF_STARTING_TIME : bit (16) > } { 0 | 1 < P0 : bit (4) > 0 ED EVOLIUM 05 RELEASED {1

--

--

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE ASSIGNMENT 3BK 11203 0138 DSZZA 271/639

< PR_MODE : bit (1) > } { null | L |H -- indicates EGPRS TBF mode, see 44.060 < EGPRS Window Size : < EGPRS Window Size IE >> < LINK_QUALITY_MEASUREMENT_MODE : bit (2) > { 0 | 1 < BEP_PERIOD2 : bit (4) > } } { null | L |H { 0 | 1 < PFI : bit (7) > } } < Frequency Parameters, before time > ::= { null -- Length of frequency parameters = 0 | 00 < MAIO : bit (6) > < Mobile Allocation : octet (val (Length of frequency parameters) 1) > }; < Second Part Packet Assignment > ::= { null | L Receiver compatible with earlier release |H -- Additions for R99 {0|1 < Extended RA : bit (5) > } } < Multiple Blocks Packet Downlink Assignment > ::= < TBF_STARTING_TIME : bit (16) > < NUMBER_OF ALLOCATED_BLOCKS : bit (4) > {0 |1 {0 -- MBMS Assignment (Distribution) < TMGI : < TMGI IE > > { 0 | 1 < MBMS Session Identity : bit (8) > } |1 -- MBMS Assignment (Non-distribution) < TLLI / G-RNTI bit (32) > {0|1 < Length Indicator of MS ID : bit (2) > < MS_ID : bit (val (Length Indicator of MS_ID)+1) > < PACKET_TIMING_ADVANCE : < Packet Timing Advance IE > > {0|1 < ALPHA : bit (4) > { 0 | 1< GAMMA : bit (5) > } } } } }; SUB PARAMETER DEFINITION Compressed_Inter_RAT_HO_INFO_IND (1 bit field): L A compressed version of the INTER RAT HANDOVER INFO message shall not be used; H A compressed version of the INTER RAT HANDOVER INFO message shall be used. Set to H if EN_COMPRESSED_INTER_RAT_INFO = 1, otherwise set to L. For other parameters, see FBS GPRS - Radio Interface - RRM sublayer - PCC (ref. [31]).

--

--

PARAMETER ORIGIN - ACTION ON PARAMETER LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE ED 05 RELEASED IMMEDIATE ASSIGNMENT EVOLIUM
0138_05.doc 15/02/2008

3BK 11203 0138 DSZZA

272/639

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE ASSIGNMENT 3BK 11203 0138 DSZZA 273/639

6.30 IMMEDIATE ASSIGNMENT EXTENDED


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO CCCH/(AGCH-PCH) 44.018

IMMEDIATE ASSIGNMENT EXTENDED ABIS A

This message is sent on the CCCH by the network to two MSs in idle mode to change the channel configuration to dedicated configuration while staying in the same cell. From : BTS INFORMATION ELEMENT NAME To : 2 MSs TYPE MV MV MV MV MV MV MV MV MV M LV O TV MV first MS first MS first MS second MS second MS second MS Not Used COMMENT LENGTH (byte) 1 2 3 3 1 3 3 1 1-5 3 0-4 23 TIMER

DIRECTION

INFORMATION ELEMENT LIST

L2 Pseudo Length Header Page mode Spare Channel Description Request Reference Timing Advance Channel Description Request Reference Timing Advance Mobile Allocation Starting Time IAX Rest Octets

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT ABNORMAL SITUATION

Access to main DCCH

Release resources if MS does not access the new channel

T3101

SPECIF DOC. REF.

Paging and Access Grant Control (ref. [1]) Radio and link establishment (ref. [2])

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE ASSIGNMENT EXTENDED 3BK 11203 0138 DSZZA 274/639

6.30.1 GENERAL DESCRIPTION L2 Pseudo length 8 0 0 0 7 0 0 0 L2 Pseudo Length 0 1 0 1 6 5 4 0 0 1 3 1 0 0 0 2 1 0 TN PM 1 1 0 1

Page Mode

Channel type and TDMA offset TSC H=1-> H=0->

Channel Description Request

spare

MAIO (high part)

MAIO (low part)

HSN ARFCN (Low part) T1' RA

ARFCN (High Part)

Reference Timing Advance 0

T3 Low part 0

Channel type and TDMA offset TSC H=1-> H=0->

Timing Advance Value

T2

T3 High Part

spare

MAIO (high part)

TN

MAIO (low part) Request

HSN ARFCN (Low part) T1' RA

ARFCN (High Part)

Reference Timing Advance Mobile Allocation 0 MA C 8n :

T3 Low part 0

MA C 8n-1

Length of mobile allocation contents 4

Timing Advance Value MA C 8n-7 :

T2

T3 High Part

IAX Rest Octets

: :

MA C 8 0 spare 0 spare

0 spare 0 spare

1 spare 1 spare

0 spare 0 spare

1 spare 1 spare

0 spare 0 spare

1 spare 1 spare

MA C 1 1 spare 1 spare

: :

The length of the message is always 23 octets, therefore the length of the IAX rest octets depends on the length of the mobile allocation. LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE ASSIGNMENT EXTENDED 3BK 11203 0138 DSZZA 275/639

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

6.30.2 L2 PSEUDO LENGTH TYPE : M DEFINITION This information element indicates the number of octets following it in the message which are to be interpreted in the scope of phase 1 protocol. BIT DESCRIPTION 8 7 6 5 4 3 2 1

L2 Pseudo Length value

PARAMETER ORIGIN - ACTION ON PARAMETER

6.30.3 PAGE MODE TYPE : M DEFINITION To control the action of the Mobile Station belonging to the paging subgroup corresponding to the paging subchannel. BIT DESCRIPTION 8 1 7 0 6 1 5 1 4 0 3 0 2 1

|_______________________| IEI *

|_______________________| Page Mode

PM

IEI value is not defined in GSM phase 2 (never sent or received on the Radio interface). Bits 3 and 4 are spare bits. SUB PARAMETER DEFINITION Page Mode 00 01 10 11 Normal paging Extended paging Paging - Reorganisation Same as before Always used in case of PS assignment Not used Not used Always used in case of CS assignment

PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE ASSIGNMENT EXTENDED 3BK 11203 0138 DSZZA 276/639

6.30.4 CHANNEL DESCRIPTION TYPE : M DEFINITION To provide a description of an allocatable channel together with its SACCH. BIT DESCRIPTION 8 0 7 1 6 1 5 0 4 0 3 1 2 TN 0 1 0 1

Channel type and TDMA offset TSC H=1-> H=0->

MAIO (high part) ARFCN (Hpart)

MAIO low part

spare HSN A R F C N (low part)

SUB PARAMETER DEFINITION Octet 2 Channel type and TDMA offset. Bits 8 7 6 5 4 0 0 0 0 1 TCH/F + ACCHs 0 0 0 1 T TCH/H + ACCHs 0 0 1 T T SDCCH/4 + SACCH/C4 or CBCH (SDCCH/4) 0 1 T T T SDCCH/8 + SACCH/C8 or CBCH (SDCCH/8) all other values are reserved. T bit indicates the Subchannel Number. TN : Time slot (0 to 7) Octets 3 and 4 : TSC : Training Sequence Code (0 to 7) H : "0" Single RF channel "1" RF hopping channel

Channel selector : H = "0" : The channel selector field consists of the absolute RF channel number. Bits 4 3 0 0 spare ARFCN : Octet 3 Octet 4 Bits 2,1 High part of ARFCN Bits 8 to 1 ARFCN low part

The ARFCN is coded as the binary representation of the absolute RF channel Number. Range 0 to 1023. ED EVOLIUM 05 RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE ASSIGNMENT EXTENDED 3BK 11203 0138 DSZZA 277/639

H = "1" :

The channel selector field consists of the mobile allocation index offset, MAIO, and the hopping sequence number, HSN. Bits 4 to 1 High part Bits 8 to 7 Low part

MAIO : Octet 3 Octet 4

HSN (Octet 4, Bits 1 to 6) Value 0 to 63. The HSN field is coded as the binary representation of the hopping sequence number. PARAMETER ORIGIN - ACTION ON PARAMETER This parameter is transparent for the BTS when received. At the BSC site, the BSC has to provide the following information : Channel type and TDMA offset and TN depends of the resource to be allocated by the resource manager. H : fixed value according if hopping is used or not (this information has to be provided by O&M). Channel selector (it is MAIO). HSN : value defined per TS.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE ASSIGNMENT EXTENDED 3BK 11203 0138 DSZZA 278/639

6.30.5 REQUEST REFERENCE TYPE : M DEFINITION To provide the random access number used in the channel request and the frame number, FN modulo 42432 in which the channel request was received. BIT DESCRIPTION 8 0 7 1 6 1 T1' T3 Low part SUB PARAMETER DEFINITION RA Random Number T1', T3, T2 Starting time information element T1' : binary representation of (FN div 1326) mod 32 T3 : " " FN mod 51 T2 : " " FN mod 26 FN mod 42432 = 51 x ((T3 - T2) mod 26) + T3 + 51 x 26 x T1' PARAMETER ORIGIN - ACTION ON PARAMETER RA This information comes from the MS in Channel Required message addressed by the BTS. It is used to allow the MS to recognise its own request among those sent by the BSC at the same time. T1', T3, T2 are also stored from Channel Required message Time of arrival (in terms of Frame Number) of the Access Burst given by the BTS in the Channel Required message. 5 1 RA 4 1 3 0 2 0 T3 High part 1 1

T2

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE ASSIGNMENT EXTENDED 3BK 11203 0138 DSZZA 279/639

6.30.6 TIMING ADVANCE TYPE : M DEFINITION To provide Timing Advance value BIT DESCRIPTION 8 0 0 Bits 7, 8 are spare bits. SUB PARAMETER DEFINITION Binary representation of the timing advance in bit periods (1 bit period 48/13 s). PARAMETER ORIGIN - ACTION ON PARAMETER The access delay is stored by the BSC and sent to the MS as Timing advance. 7 1 0 6 1 5 1 4 1 3 1 2 0 1 1

Timing Advance Value

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE ASSIGNMENT EXTENDED 3BK 11203 0138 DSZZA 280/639

6.30.7 MOBILE ALLOCATION TYPE : M DEFINITION To provide the part of the RF channels belonging to the cell allocation which is used in the Mobile Station hopping sequence. BIT DESCRIPTION 8 0 7 1 6 1 5 1 0 4 3 0 2 1 0 1

MA C 8n MA C 8

MA C 8n-1

Length of Mobile alloc. contents 4

MA C 8n-7 MA C 1

SUB PARAMETER DEFINITION MA length depends on the number of frequencies in the cell allocation frequency list ( up to 4 for 32 frequencies ). MA Ci : Mobile Allocation RF channel i - the RF channels represented in the MA C i bit fields are those which in the cell channel description information element are coded with "1" in the CA ARFCN N bit fields. MA Ci = CA ARFCN N(i) i = 1,2...NF

(NF = Number of Frequencies in the CA frequency list). For a RF channel belonging to the Mobile Allocation the MA Ci bit is coded with a "1", for a RF channel not belonging to the Mobile Allocation, the MA C bit is coded with a "0". PARAMETER ORIGIN - ACTION ON PARAMETER The parameter is transparent for the BTS when received from the BSC. Note: mandatory if Frequency Hopping system in used, otherwise the length is 0.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE ASSIGNMENT EXTENDED 3BK 11203 0138 DSZZA 281/639

6.30.8 IAX REST OCTETS TYPE : M DEFINITION The IAX rest octet information element contains spare bits. BIT DESCRIPTION 8 7 6 5 4 3 2 1

0 spare 0 spare : : 0 spare

0 spare 0 spare 0 spare

1 spare 1 spare 1 spare

0 spare 0 spare 0 spare

1 spare 1 spare 1 spare

0 spare 0 spare 0 spare

1 spare 1 spare 1 spare

1 spare 1 spare : : 1 spare

PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE ASSIGNMENT EXTENDED 3BK 11203 0138 DSZZA 282/639

6.31 IMMEDIATE ASSIGNMENT REJECT


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION RADIO CCCH/(AGCH-PCH) 44.018

IMMEDIATE ASSIGNMENT REJECT ABIS A

This message is sent on the CCCH by the network to up to four MSs in idle mode in order to delay their random access procedures. From : BTS INFORMATION ELEMENT NAME To : up to four MSs TYPE MV MV MV MV MV MV MV MV MV MV MV MV MV COMMENT LENGTH (byte) 1 2 3 1 3 1 3 1 3 1 3 23 TIMER

INFORMATION ELEMENT LIST

L2 Pseudo Length Header Page mode SpareHalf Octet Request Reference 1 Wait Indication 1 Request Reference 2 Wait Indication 2 Request Reference 3 Wait Indication 3 Request Reference 4 Wait Indication 4 IAR Rest Octets

first MS first MS second MS second MS third MS third MS fourth MS fourth MS

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT ABNORMAL SITUATION

SPECIF DOC. REF.

Paging and Access Grant Control (ref. [1]) Radio and link establishment (ref. [2]) FBS - Radio Interface - RRM Sub-layer (PCC)

(ref. [29])

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE ASSIGNMENT REJECT 3BK 11203 0138 DSZZA 283/639

6.31.1 GENERAL DESCRIPTION 8 L2 Pseudo length 0 0 Page Mode Reference 1 Wait Indication 1 Reference 2 Wait Indication 2 Reference 3 Wait Indication 3 Reference 4 Wait Indication 4 IAR Rest Octets 0 spare 0 spare 0 spare 0 spare 0 spare 0 spare 1 spare 1 spare 1 spare Request T1' Request T1' Request T1' Request 0 0 0 0 7 6 0 1 0 T1' 5 0 1 0 RA T2 T3122 timeout value RA T2 T3122 timeout value RA T2 T3122 timeout value RA T2 T3122 timeout value 0 spare 0 spare 0 spare 1 spare 1 spare 1 spare 0 spare 0 spare 0 spare 1 spare 1 spare 1 spare 1 spare 1 spare 1 spare T3 High Part T3 High Part T3 High Part 4 0 1 0 3 1 0 0 2 0 1 1 PM T3 High Part 1 1 0 0

L2 Pseudo Length

T3 Low part

T3 Low part

T3 Low part

T3 Low part

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE ASSIGNMENT REJECT 3BK 11203 0138 DSZZA 284/639

6.31.2 L2 PSEUDO LENGTH TYPE : M DEFINITION This information element indicates the number of octets following it in the message which are to be interpreted in the scope of phase 1 protocol. BIT DESCRIPTION 8 7 6 5 4 3 2 1

L2 Pseudo Length value

PARAMETER ORIGIN - ACTION ON PARAMETER

6.31.3 PAGE MODE TYPE : M DEFINITION To control the action of the Mobile Station belonging to the paging subgroup corresponding to the paging subchannel. BIT DESCRIPTION 8 1 7 0 6 1 5 1 4 0 3 0 2 1

|_______________________| IEI *

|________________________| Page Mode

PM

IEI value is not defined in GSM phase 2 (never sent or received on the Radio interface). Bits 3 and 4 are spare bits. SUB PARAMETER DEFINITION Page Mode 00 01 10 11 Normal paging Extended paging Paging - Reorganisation Same as before Always used in case of PS assignment Not used Not used Always used in case of CS assignment LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE ASSIGNMENT REJECT 3BK 11203 0138 DSZZA 285/639

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

PARAMETER ORIGIN - ACTION ON PARAMETER 6.31.4 REQUEST REFERENCE TYPE : M DEFINITION To provide the random access number used in the channel request and the frame number, FN modulo 42432 in which the channel request was received. BIT DESCRIPTION 8 0 7 1 6 1 T1' T3 Low part SUB PARAMETER DEFINITION RA Random Number When set to the value 0111 1111, the RA information of the Request Reference i IE indicates that an Extended RA i field may be included in the IAR Rest Octets. The mobile station shall use the information in the Extended RA i field to identify the Immediate Assignment Reject message corresponding to an EGPRS Packet Channel Request message. T1', T3, T2 Starting time information element T1' : binary representation of (FN div 1326) mod 32 T3 : " " FN mod 51 T2 : " " FN mod 26 FN mod 42432 = 51 x ((T3 - T2) mod 26) + T3 + 51 x 26 x T1' PARAMETER ORIGIN - ACTION ON PARAMETER RA: This information comes from the MS in Channel Required message addressed by the BTS. It is used to allow the MS to recognise its own request among those sent by the BSC at the same time. T1', T3, T2 are also stored from Channel Required message Time of arrival (in terms of Frame Number) of the Access Burst given by the BTS in the Channel Required message. 5 1 RA 4 1 3 0 2 0 T3 High part 1 1

T2

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE ASSIGNMENT REJECT 3BK 11203 0138 DSZZA 286/639

6.31.5 WAIT INDICATION TYPE : M DEFINITION This information element indicates the number of seconds the MS shall wait before sending another random access. BIT DESCRIPTION 8 7 6 5 4 3 2 1

T3122 / T3142 timeout value (Note 1)

Note 1: When IMMEDIATE ASSIGNMENT REJECT message is for RR connection establishment then this IE contains the timer value for T3122. If IMMEDIATE ASSIGNMENT REJECT message is for TBF establishment for GPRS MS (in case of saturated PDCHs or of TFI lack) then this IE contain the timer value for T3142 (Note that T3142 is named WI_PR in the Alcatel BSS). PARAMETER ORIGIN - ACTION ON PARAMETER

6.31.6 IAR REST OCTETS TYPE : M DEFINITION The IAR rest octet information element contains spare bits when the RA information of all Request Reference IE is not set to 0111 1111. Otherwise, when the RA information of the Request Reference i IE is set to 0111 1111, then the Extended RA i field is included in the IAR rest octet IE, see below. BIT DESCRIPTION <IAR Rest Octets> ::= { 0 | 1 < Extended RA 1 : bit (5) > } { 0 | 1 < Extended RA 2 : bit (5) > } { 0 | 1 < Extended RA 3 : bit (5) > } { 0 | 1 < Extended RA 4 : bit (5) > } <spare padding> ; The Extended RA i (5 bits) is the Extended Random Access information related to the Request Reference i (i within the range 1...4). These are unformatted 5 bit fields, whose contents are coded as the 5 least significant bits of the EGPRS PACKET CHANNEL REQUEST message.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE ASSIGNMENT REJECT 3BK 11203 0138 DSZZA 287/639

PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE ASSIGNMENT REJECT 3BK 11203 0138 DSZZA 288/639

6.32 IMMEDIATE SETUP


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION RADIO SDCCH/FACCH 44.068 IMMEDIATE SETUP ABIS BTS Transparent NA A

The BSC is only non transparent to the classmark information. From: MS INFORMATION ELEMENT NAME To: BSC TYPE COMMENT LENGTH (byte) 2 4 2-9 4 20 TIMER

INFORMATION ELEMENT LIST

Header Spare half octet Ciphering key sequence number Mobile Station Classmark Mobile Identity Group identity

M V M V M LV M LV MV

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT ABNORMAL SITUATION

SPECIF DOC. REF.

ASCI Functional Specification (ref. [36])

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE SETUP 3BK 11203 0138 DSZZA 289/639

6.32.1 GENERAL DESCRIPTION

8 0 0 Spare half octet and Ciphering key sequence number Mobile Station Classmark 2 0 0 spare 0 spare CM3

7 N(SD) 0 0

6 0 1

5 0 1

4 0 0

3 0 0

2 0 0

Spare half octet 0

Ciphering key sequence number

Revision ESlevel IND PS SS Screen. Capa. Indicator 0 spare

Length of MS classmark 2 contents A5/1 SM. cap

RF power Capability VGCS A5/3

VBS

FC A5/2

Identity Group identity

Mobile

ID digit 1 ...

LCS UCS2 SoLSA CMSP VA CAP Length of Mobile Identity contents OEI

ID digit 3

ID digit 2 ID digit p ...

Type of ID

ID digit p+1 Call reference

6.32.2 CIPHERING KEY SEQUENCE NUMBER TYPE M DEFINITION Identification of the ciphering key Kc which is stored in the Mobile Station without invoking the authentification procedure. BIT DESCRIPTION 8 0 Bit 4 is spare bit. ED EVOLIUM 05 RELEASED LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE SETUP 3BK 11203 0138 DSZZA 290/639 Spare half octet 0 0 7 6 5 0 4 0 3 key sequence 2 1

0138_05.doc 15/02/2008

SUB PARAMETER DEFINITION Key sequence: value 0 to 6: value 7: Possible values for ciphering key sequence number no key is available (MS to network) Reserved (network to MS).

PARAMETER ORIGIN - ACTION ON PARAMETER BSC is transparent to this parameter.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE SETUP 3BK 11203 0138 DSZZA 291/639

6.32.3 MS CLASSMARK 2 TYPE: M DEFINITION Defines certain attributes of the Mobile Station equipment in use on a particular transaction. BIT DESCRIPTION 8 0 spare 0 spare CM3 7 6 5 Length 4 3 2 RF power Capability VBS CMSP VGCS A5/3 1 1 2 FC A5/2 3 4

Revision ES level IND PS SS Screen. Capa. Indicator 0 spare LCS VA CAP

A5/1 SM. cap

UCS2

SoLSA

Bit 8 of octet 2 spare set to 0 Bits 8 of octet 3 spare set to 0 SUB PARAMETER DEFINITION Octet 2: Bits Revision level 76 00 01 10 5 0 1 Bit A5/1 Bits RF Power capability P-GSM, GSM850 and E-GSM 4 0 1 321 000 001 010 011 100 000 001 010 000

Bit ES-IND

Reserved for phase 1 Used by phase 2 MS Used by mobile stations supporting R99 or later versions of the protocol All other value reserved Controlled Early Classmark Sending option not implemented. Controlled Early Classmark Sending option implemented. algorithm A5/1 available algorithm A5/1 not available. class 1 class 2 class 3 class 4 class 5 All other values reserved class 1 class 2 class 3, handled as class 1 All other values reserved class 1

DCS1800

DCS1900 ED EVOLIUM 05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE SETUP 3BK 11203 0138 DSZZA 292/639

001 010

class 2 class 3, handled as class 1 All other values reserved

Octet 3: Bit PS Capability Bits SS Screening Indicator

Bit SM Capability Bit VBS Voice Broadcast Service Bit VGCS Voice Call Service Bit FC Capability

7 0 1 65 00 01 10 11 4 0 1 3 0

PS capability not present PS capability present Defined in GSM 04.80 Defined in GSM 04.80 Defined in GSM 04.80 Defined in GSM 04.80 MS does not support mobile terminated point to point SMS. MS supports mobile terminated point to point SMS. no VBS capability or no notifications wanted

Group

1 VBS capability and notifications wanted Not implemented in the BSS. 2 0 no VGCS capability or no notifications wanted 1 1 0 1 0 The MS does not support the extension band G1 in addition to the primary GSM band. The MS does support the extension band G1. Reserved for future use VGCS capability and notifications wanted

Frequency GSM900

GSM850, DCS1800, DCS1900

Note: only FC is checked in this release and only in GSM900 configuration.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE SETUP 3BK 11203 0138 DSZZA 293/639

Octet 4 Bit CM3 Classmark 3 Bit LCS VA capability

8 0 1 6 0

No additional MS capability Additional MS capabilities are described in the MS Classmark 3 information element.

Bit UCS2 treatment

Bit SoLSA Bit CMSP: CM Service Prompt

Bit A5/3 algorithm supported Bit A5/2 algorithm supported

LCS value added location request notification capability not supported 1 LCS value added location request notification capability supported Not implemented in the BSS. 5 0 the ME has a preference for the default alphabet (defined in GSM 03.38) over UCS2 1 the ME has no preference between the use of the default alphabet and the use of UCS2. Not implemented in the BSS. 4 0 The ME does not support SoLSA 1 The ME supports SoLSA. 3 0 "Network initiated MO CM connection request" not supported 1 "Network initiated MO CM connection request" supported for at least one CM protocol. Not implemented in the BSS. 2 0 A5/3 not available 1 A5/3 available 1 0 A5/2 not available 1 A5/2 available Note: only A5/2 is checked in this release.

PARAMETER ORIGIN - ACTION ON PARAMETER The BSC takes this information in order to have the MS capabilities.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE SETUP 3BK 11203 0138 DSZZA 294/639

6.32.4 MOBILE IDENTITY TYPE: M DEFINITION To provide either the IMSI or the TMSI .The IMEI. IMEISV are not used in this message. Note: IMSI 15 digits TMSI = 4 octets

BIT DESCRIPTION 8 7 6 5 4 3 2 1

ID digit 1 ID digit 3 :

Length of Mobile Identity contents OEI

ID digit 2 :

Type of ID

ID digit p+1 SUB PARAMETER DEFINITION Type of ID: 001 IMSI 010 IMEI 011 IMEISV 100 TMSI 000 No identity other values reserved

ID digit P

Not used Not used Not used

OEI: Odd Even Indicator value 0: even number of identity digits (even for TMSI) 1: odd number of digits

Filled digit :1 1 1 1 Octet 2 For the IMSI this field is coded using BCD coding. If the number of identify digits is even then bits 5 to 8 of the last octet shall be filled with an end mark coded as '1111'. If the mobile identity is the TMSI then bits 5 to 8 of octet 2 is coded as '1111' and bit 8 of octet 3 is the most significant bit, and bit 1 of the last octet is the least significant bit. PARAMETER ORIGIN - ACTION ON PARAMETER BSC transparent.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE SETUP 3BK 11203 0138 DSZZA 295/639

6.32.5 GROUP IDENTITY TYPE: M DEFINITION: identifies the group call reference or group Id of a group call. BIT DESCRIPTION 8 7 6 5 4 3 2 1

Call reference(contd) Call reference(contd) Call reference(contd) 0 -> 1 -> SUB PARAMETER DEFINITION reference : This field contains the 27 bit binary encoding (with leading zeroes) of the number the decimal encoding of which (with leading zeroes) is the group call reference or the group id. priority: 000 001 010 011 100 101 110 111 reserved call priority level 4 call priority level 3 call priority level 2 call priority level 1 call priority level 0 call priority level B call priority level A 0 Spare_4 0 0 Priority

Call reference

Spare_ 1

PARAMETER ORIGIN - ACTION ON PARAMETER Transparently sent through the BSS.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE SETUP 3BK 11203 0138 DSZZA 296/639

6.33 IMMEDIATE SETUP 2


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION RADIO SDCCH/FACCH 44.068 IMMEDIATE SETUP 2 ABIS BTS Transparent NA A

The BSC is only non transparent to the classmark information. From: MS INFORMATION ELEMENT NAME To: BSC TYPE COMMENT LENGTH (byte) 2 4 4 4 5 20 TIMER

INFORMATION ELEMENT LIST

Header Spare half octet Ciphering key sequence number Mobile Station Classmark TMSI Group identity Compressed otdi

M V M V M LV M V MV M V

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT ABNORMAL SITUATION

SPECIF DOC. REF.

ASCI Functional Specification (ref. [36])

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE SETUP 2 3BK 11203 0138 DSZZA 297/639

6.33.1 GENERAL DESCRIPTION

8 0 0 Spare half octet and Ciphering key sequence number Mobile Station Classmark 2 0 0 spare 0 spare CM3

7 N(SD) 0 0

6 0 1

5 0 1

4 0 1

3 0 0

2 0 1

Spare half octet 0

Ciphering key sequence number

Revision ESlevel IND PS SS Screen. Capa. Indicator 0 spare LCS VA CAP

Length of MS classmark 2 contents A5/1 SM. cap SoLSA

RF power Capability VGCS A5/3

VBS CMSP

FC A5/2

UCS2

TMSI Group identity

TMSI/P-TMSI value (contd) Call reference

TMSI/P-TMSI value (contd)

TMSI/P-TMSI value (contd)

TMSI/P-TMSI value

Compressed otdi Compressed otdi

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE SETUP 2 3BK 11203 0138 DSZZA 298/639

6.33.2 CIPHERING KEY SEQUENCE NUMBER TYPE M DEFINITION Identification of the ciphering key Kc which is stored in the Mobile Station without invoking the authentification procedure. BIT DESCRIPTION 8 0 Bit 4 is spare bit. SUB PARAMETER DEFINITION Key sequence: value 0 to 6: value 7: Possible values for ciphering key sequence number no key is available (MS to network) Reserved (network to MS). Spare half octet 0 0 7 6 5 0 4 0 3 key sequence 2 1

PARAMETER ORIGIN - ACTION ON PARAMETER BSC is transparent to this parameter.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE SETUP 2 3BK 11203 0138 DSZZA 299/639

6.33.3 MS CLASSMARK 2 TYPE: M DEFINITION Defines certain attributes of the Mobile Station equipment in use on a particular transaction. BIT DESCRIPTION 8 0 spare 0 spare CM3 7 6 5 Length 4 3 2 RF power Capability VBS CMSP VGCS A5/3 1 1 2 FC A5/2 3 4

Revision ES level IND PS SS Screen. Capa. Indicator 0 spare LCS VA CAP

A5/1 SM. cap

UCS2

SoLSA

Bit 8 of octet 2 spare set to 0 Bits 8 of octet 3 spare set to 0 SUB PARAMETER DEFINITION Octet 2: Bits Revision level 76 00 01 10 5 0 1 Bit A5/1 Bits RF Power capability P-GSM, GSM850 and E-GSM 4 0 1 321 000 001 010 011 100 000 001 010 000

Bit ES-IND

Reserved for phase 1 Used by phase 2 MS Used by mobile stations supporting R99 or later versions of the protocol All other value reserved Controlled Early Classmark Sending option not implemented. Controlled Early Classmark Sending option implemented. algorithm A5/1 available algorithm A5/1 not available. class 1 class 2 class 3 class 4 class 5 All other values reserved class 1 class 2 class 3, handled as class 1 All other values reserved class 1

DCS1800

DCS1900 ED EVOLIUM 05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE SETUP 2 3BK 11203 0138 DSZZA 300/639

001 010

class 2 class 3, handled as class 1 All other values reserved

Octet 3: Bit PS Capability Bits SS Screening Indicator

Bit SM Capability Bit VBS Voice Broadcast Service Bit VGCS Voice Call Service Bit FC Capability

7 0 1 65 00 01 10 11 4 0 1 3 0

PS capability not present PS capability present Defined in GSM 04.80 Defined in GSM 04.80 Defined in GSM 04.80 Defined in GSM 04.80 MS does not support mobile terminated point to point SMS. MS supports mobile terminated point to point SMS. no VBS capability or no notifications wanted

Group

1 VBS capability and notifications wanted Not implemented in the BSS. 2 0 no VGCS capability or no notifications wanted 1 1 0 1 0 The MS does not support the extension band G1 in addition to the primary GSM band. The MS does support the extension band G1. Reserved for future use VGCS capability and notifications wanted

Frequency GSM900

GSM850, DCS1800, DCS1900

Note: only FC is checked in this release and only in GSM900 configuration.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE SETUP 2 3BK 11203 0138 DSZZA 301/639

Octet 4 Bit CM3 Classmark 3 Bit LCS VA capability

8 0 1 6 0

No additional MS capability Additional MS capabilities are described in the MS Classmark 3 information element.

Bit UCS2 treatment

Bit SoLSA Bit CMSP: CM Service Prompt

Bit A5/3 algorithm supported Bit A5/2 algorithm supported

LCS value added location request notification capability not supported 1 LCS value added location request notification capability supported Not implemented in the BSS. 5 0 the ME has a preference for the default alphabet (defined in GSM 03.38) over UCS2 1 the ME has no preference between the use of the default alphabet and the use of UCS2. Not implemented in the BSS. 4 0 The ME does not support SoLSA 1 The ME supports SoLSA. 3 0 "Network initiated MO CM connection request" not supported 1 "Network initiated MO CM connection request" supported for at least one CM protocol. Not implemented in the BSS. 2 0 A5/3 not available 1 A5/3 available 1 0 A5/2 not available 1 A5/2 available Note: only A5/2 is checked in this release.

PARAMETER ORIGIN - ACTION ON PARAMETER The BSC takes this information in order to have the MS capabilities.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE SETUP 2 3BK 11203 0138 DSZZA 302/639

6.33.4 TMSI TYPE: M DEFINITION The TMSI information element indicates the Temporary Mobile Subscriber Identity of the MS. TMSI = 4 octets BIT DESCRIPTION 8 7 6 TMSI (octet 1) TMSI (octet 2) TMSI (octet 3) TMSI (octet 4) PARAMETER ORIGIN - ACTION ON PARAMETER BSC transparent. 5 4 3 2 1

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE SETUP 2 3BK 11203 0138 DSZZA 303/639

6.33.5 GROUP IDENTITY TYPE: M DEFINITION: identifies the group call reference or group Id of a group call. BIT DESCRIPTION 8 7 6 5 4 3 2 1

Call reference(contd) Call reference(contd) Call reference(contd) 0 -> 1 -> SUB PARAMETER DEFINITION reference : This field contains the 27 bit binary encoding (with leading zeroes) of the number the decimal encoding of which (with leading zeroes) is the group call reference or the group id (see 3GPP TS 23.003). priority: 000 001 010 011 100 101 110 111 reserved call priority level 4 call priority level 3 call priority level 2 call priority level 1 call priority level 0 call priority level B call priority level A 0 Spare_4 0 0 Priority

Call reference

Spare_ 1

PARAMETER ORIGIN - ACTION ON PARAMETER Transparently sent through the BSS.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE SETUP 2 3BK 11203 0138 DSZZA 304/639

6.33.6 COMPRESSED OTDI TYPE M DEFINITION This information element contains compressed originator-to-dispatcher information. BIT DESCRIPTION 8 7 Compressed otdi (octet1) Compressed otdi (octet2) Compressed otdi (octet3) Compressed otdi (octet4) Compressed otdi (octet5) 6 5 4 3 2 1

PARAMETER ORIGIN - ACTION ON PARAMETER BSC is transparent to this parameter.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMMEDIATE SETUP 2 3BK 11203 0138 DSZZA 305/639

6.34 IMSI DETACH INDICATION


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO SDCCH 24.008

IMSI DETACH INDICATION ABIS BTS Transparent A

To set the deactivation indication in the network (MSC). The BSS is only non transparent to the classmark information From: MS INFORMATION ELEMENT NAME To: BSC TYPE COMMENT LENGTH 2 1 2-9 4-12 TIMER

DIRECTION

INFORMATION ELEMENT LIST

Header Mobile station classmark1 Mobile identity

MV M LV

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. Radio Link Establishment (ref. [2]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMSI DETACH INDICATION 3BK 11203 0138 DSZZA 306/639

6.34.1 GENERAL DESCRIPTION MS accessing Rel98 or older networks 8 0 Mobile station classmark 1 Mobile 0 0 7 N(SD) 0 6 0 0 5 0 0 4 0 0 3 1 0 2 0 0 1 1 1

Revision level ID digit 1

ESA5/1 RF power IND capab. Length of Mobile Identity contents OEI ID digit 2

Identity

ID digit 3

Type of ID :

ID digit p+1

ID digit P

MS accessing Rel99 or newer networks 8 0 7 0 6 0 0 5 0 0 4 0 0 3 1 0 2 0 0 1 1 1

N(SD) or 0 Mobile station classmark 1 Mobile 0

Revision level ID digit 1

ESA5/1 RF power IND capab. Length of Mobile Identity contents OEI ID digit 2

Identity

ID digit 3

Type of ID :

ID digit p+1

ID digit P

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMSI DETACH INDICATION 3BK 11203 0138 DSZZA 307/639

6.34.2 MS CLASSMARK 1 TYPE: M DEFINITION To provide the network with Information concerning the capabilities of the MS. BIT DESCRIPTION 8 0 7 6 5 4 3 2 1

Revision level

ES IND

A5/1

RF power capab.

SUB PARAMETER DEFINITION Bits 7, 6 Revision level 00 01 10 0 1 A5/1 Bits 3 2 1 RF Power capability GSM900 and GSM850 0 1 Reserved for Phase 1 Used for phase 2 MSs Used by mobile stations supporting R99 or later versions of the protocol Controlled Early Classmark Sending option not implemented Controlled Early Classmark Sending option implemented Algorithm A5/1 available Algorithm A5/1 not available

ES IND

DCS1800

DCS1900

0 0 0 class 1 0 0 1 class 2 0 1 0 class 3 0 1 1 class 4 1 0 0 class 5 All other values reserved 0 0 0 class 1 0 0 1 class 2 0 1 0 class 3, handled as class 1 All other values reserved 0 0 0 class 1 0 0 1 class 2 0 1 0 class 3, handled as class 1 All other values reserved

PARAMETER ORIGIN - ACTION ON PARAMETER The BSC is non transparent to this parameter, in order to read the capabilities of the attached MSs. If it is not possible to determine the MS Revision level, then 'Reserved for Phase 1' is assumed. If the RF power capability is not in the correct range then a default value is used (see reference [25]). If it is not possible to determine the MS ciphering capabilites, then only 'no encryption' is assumed.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMSI DETACH INDICATION 3BK 11203 0138 DSZZA 308/639

6.34.3 MOBILE IDENTITY TYPE: M DEFINITION To provide either the IMSI, the TMSI or the IMEI. IMEISV is not used in the IMSI Detach Indication message. Note IMSI 15 digits TMSI = 4 octets IMEI = 15 digits BIT DESCRIPTION 8 7 Length of Mobile Identity contents OEI 6 5 4 3 2 1

ID digit 1 ID digit 3 :

ID digit 2 :

Type of ID

ID digit p+1 SUB PARAMETER DEFINITION Type of ID: 001 IMSI 010 IMEI 011 IMEISV 100 TMSI 000 No identity other values reserved

ID digit P

Not used Not used

OEI: Odd Even Indicator value 0: even number of identity digits (even for TMSI) 1: odd number of digits

Filled digit :1 1 1 1 Octet 2 For the IMSI, IMEI and the IMEISV, this field is coded using BCD coding (number 0 through 9). If the number of identify digits is even then bits 5 to 8 of the last octet shall be filled with an end mark coded as '1111'. If the mobile identity is the TMSI then bits 5 to 8 of octet 2 is coded as '1111' and bit 8 of octet 3 is the most significant bit, and bit 1 of last octet is the least significant bit. PARAMETER ORIGIN - ACTION ON PARAMETER BSC transparent.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE IMSI DETACH INDICATION 3BK 11203 0138 DSZZA 309/639

6.35 INTER SYSTEM TO UTRAN HANDOVER COMMAND


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION INTER SYSTEM TO UTRAN HANDOVER COMMAND RADIO FACCH/SDCCH 44.018 ABIS Transparent NA A

This message is sent on the main DCCH by the network to the mobile station to change the dedicated channel in GSM to a dedicated channel configuration in UTRAN. From BSS To MS INFORMATION ELEMENT NAME TYPE M V M LV COMMENT LENGTH (byte) 2 2-n 4-n TIMER T3121

INFORMATION ELEMENT LIST

Header Handover to UTRAN Command

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. 2G to 3G handover execution procedure. External channel changes [7] ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE INTER SYSTEM TO UTRAN HANDOVER COMMAND 3BK 11203 0138 DSZZA 310/639

6.29.1GENERAL DESCRIPTION 8 7 6 5 4 3 2 1

0 1

0 1

0 0

0 0

1 0

1 1

0 1

Handover to UTRAN command 6.29.2 Handover to UTRAN Command TYPE: M

Length (=2-n) Handover to UTRAN command value part

DEFINITION: The Handover to UTRAN Command information element contains all information needed by the mobile for handover to UTRAN. BIT DESCRIPTION: BSS handles this IE as an unstructured octet string, with a maximum length of n octets, and forwards to MS. SUB-PARAMETER DEFINITION: None PARAMETER ORIGIN - ACTION ON PARAMETER: The BSS got this IE from Handover Command, which is sent by MSC.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE INTER SYSTEM TO UTRAN HANDOVER COMMAND 3BK 11203 0138 DSZZA 311/639

6.36 LOCATION UPDATING REQUEST


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO Main DCCH 24.008

LOCATION UPDATING REQUEST ABIS BTS Transparent A

The BSC is only non transparent to the classmark information in order to know the MS capabilities. From: MS INFORMATION ELEMENT NAME To: BSC TYPE
COMMENT

DIRECTION

INFORMATION ELEMENT LIST

LENGTH (byte) 2 5 1 2-9 5 11-18 TIMER

Header Location updating type Ciphering key sequence number Location area identification Mobile station classmark1 Mobile Identity Mobile station classmark for UMTS

MV MV MV MV M LV M TLV

Not used

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. 1/2 means half-octet. Radio Link Establishment (ref. [2]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE LOCATION UPDATING REQUEST 3BK 11203 0138 DSZZA 312/639

6.36.1 GENERAL DESCRIPTION MS accessing Rel.98 or older network 0 0 Ciphering Key Seq & loc. upd. type Location Area Identification 0 N(SD) 0 0 0 0 0 0 1 1 0 0 0 LUT 1 0

key sequence MNC Digit 3 (Note) MNC Digit 2 MCC Digit 2

FOR

MCC Digit 3 LAC

MCC Digit 1

MNC Digit 1

LAC (continued) Mobile station Classmark 1 Mobile 0 Revision level ID digit 1 .... ESA5/1 RF power IND capab. Length of Mobile Identity contents OEI ID digit 2 ......

Identity

ID digit 3

Type of ID

ID digit p+1 MS accessing Rel.99 or newer network N(SD) or 0 Ciphering Key Seq & loc. upd. type Location Area Identification 0 0 0 0 0 0 0 1 0

ID digit P

1 0

0 LUT

key sequence MNC Digit 3 (Note) MNC Digit 2 MCC Digit 2

FOR

MCC Digit 3 LAC

MCC Digit 1

MNC Digit 1

LAC (continued) Mobile station Classmark 1 Mobile 0 Revision level ID digit 1 .... ESA5/1 RF power IND capab. Length of Mobile Identity contents OEI ID digit 2 ......

Identity

ID digit 3

Type of ID

ID digit p+1

ID digit P

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE LOCATION UPDATING REQUEST 3BK 11203 0138 DSZZA 313/639

Note

3 digits MNC is supported. Note that in case where only two digits MNC is used, the field MNC Digit 3 shall be filled in with 1111.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE LOCATION UPDATING REQUEST 3BK 11203 0138 DSZZA 314/639

6.36.2 LOCATION UPDATING TYPE TYPE: M DEFINITION To indicate why the location updating is performed by MS. BIT DESCRIPTION 8 7 6 5 FOR 4 3 0 2 LUT 1

Bit 3 is a spare bit. SUB PARAMETER DEFINITION LUT: 00 01 10 11 FOR 0 1 Normal location updating Periodic updating IMSI attach Reserved No follow on request pending Follow on request pending

PARAMETER ORIGIN - ACTION ON PARAMETER BSC transparent.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE LOCATION UPDATING REQUEST 3BK 11203 0138 DSZZA 315/639

6.36.3 CIPHERING KEY SEQUENCE NUMBER TYPE: M DEFINITION Identification of the ciphering key Kc which is stored in the Mobile Station without invoking the authentification procedure. BIT DESCRIPTION 8 7 6 5 4 3 2 1

key sequence

SUB PARAMETER DEFINITION Key sequence: value value 000 : : 110 111 : Possible values for ciphering key sequence number. no key is available Reserved (MS to network) (network to MS)

PARAMETER ORIGIN - ACTION ON PARAMETER BSC Transparent.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE LOCATION UPDATING REQUEST 3BK 11203 0138 DSZZA 316/639

6.36.4 LOCATION AREA IDENTIFICATION TYPE: M DEFINITION To provide unambiguous identification of previous Location Area of the Mobile Station within the area covered by GSM system. BIT DESCRIPTION 8 7 6 5 4 3 2 1

MNC Digit 3 (Note) MNC Digit 2 LAC

MCC Digit 2

MCC Digit 3

MCC Digit 1 MNC Digit 1

LAC (continued) Note 3 digits MNC is supported. Note that in case where only two digits MNC is used, the field MNC Digit 3 shall be filled in with 1111.

SUB PARAMETER DEFINITION MCC Mobile Country Code (See CCITT. E.212) MNC Mobile Network Code (BCD) LAC Location Area Code (Coding scheme chosen by administration) PARAMETER ORIGIN - ACTION ON PARAMETER BSC Transparent.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE LOCATION UPDATING REQUEST 3BK 11203 0138 DSZZA 317/639

6.36.5 MS CLASSMARK 1 TYPE: M DEFINITION To provide the network with Information concerning aspects with both high and low priority of the Mobile Station equipment. BIT DESCRIPTION 8 0 7 6 5 4 3 2 1

Revision level

ES IND

A5/1

RF power capab.

SUB PARAMETER DEFINITION Revision level 00 01 10 0 1 0 1 Reserved for Phase 1 Used for phase 2 MSs Used by mobile stations supporting R99 or later versions of the protocol Controlled Early Classmark Sending option not implemented Controlled Early Classmark Sending option implemented Algorithm A5/1 available Algorithm A5/1 not available

ES IND A5/1 RF Power capability GSM900 and GSM850

DCS1800

DCS1900

0 0 0 class 1 0 0 1 class 2 0 1 0 class 3 0 1 1 class 4 1 0 0 class 5 All other values reserved 0 0 0 class 1 0 0 1 class 2 0 1 0 class 3, handled as class 1 All other values reserved 0 0 0 class 1 0 0 1 class 2 0 1 0 class 3, handled as class 1 All other values reserved

PARAMETER ORIGIN - ACTION ON PARAMETER The BSC is non transparent to this parameter, in order to read the capabilities of the attached MSs. If it is not possible to determine the MS Revision level, then 'Reserved for Phase 1' is assumed. If the RF power capability is not in the correct range then a default value is used (see reference [25]). If it is not possible to determine the MS ciphering capabilites, then only 'no encryption' is assumed.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE LOCATION UPDATING REQUEST 3BK 11203 0138 DSZZA 318/639

6.36.6 MOBILE IDENTITY TYPE: M DEFINITION To provide either the IMSI, the TMSI or the IMEI. IMEISV is not used in the Location Updating Request message. Note IMSI 15 digits TMSI = 4 octets IMEI = 15 digits

BIT DESCRIPTION 8 7 6 5 4 3 2 1

1 2 3 N

ID digit 1 ID digit 3 :

Length of Mobile Identity contents OEI

ID digit 2 :

Type of ID

ID digit p+1

ID digit P

SUB PARAMETER DEFINITION Type of ID: 001 IMSI 010 IMEI 011 IMEISV 100 TMSI 000 No identity other values reserved

OEI value

: Odd Even Indicator 0: even number of identity digits (even for TMSI) 1: odd number of digits

Octet 2 For the IMSI, IMEI and the IMEISV, this field is coded using BCD coding (number 0 through 9). If the number of identify digits is even then bits 5 to 8 of the last octet shall be filled with an end mark coded as '1111'. If the mobile identity is the TMSI then bits 5 to 8 of octet 2 is coded as '1111' and bit 8 of octet 3 is the most significant bit, and bit 1 of last octet is the least significant bit. PARAMETER ORIGIN - ACTION ON PARAMETER BSC transparent.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE LOCATION UPDATING REQUEST 3BK 11203 0138 DSZZA 319/639

6.37 MEASUREMENT INFORMATION


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO FACCH/SDCCH 44.018

MEASUREMENT INFORMATION ABIS Transparent NA A

DIRECTION

This message is sent on the SACCH by the network to the mobile station. If not all information fits into one message, the remaining information will be sent in other instances of this message. This message may contain a combination of information for e.g. 3G Neighbour Cell Description, or 3G Measurement parameters. From BSS To MS INFORMATION ELEMENT NAME TYPE M V M LV COMMENT LENGTH (byte) 1 11-20 21 TIMER

INFORMATION ELEMENT LIST

Header Measurement Information value part

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. MS can build build the 3G Neighbour Cell list. System Information Management [24] ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE MEASUREMENT INFORMATION 3BK 11203 0138 DSZZA 320/639

6.30.1 GENERAL DESCRIPTION 8 "short header" Measurement information value part RR short PD 7 6 5 Message type See the table below for the detail 4 3 2 1 Short layer 2 header

Message type = 0 0 1 0 1

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE MEASUREMENT INFORMATION 3BK 11203 0138 DSZZA 321/639

6.30.2 MESUREMENT INFORMATION VALUE PART TYPE: M DEFINITION This message is sent on the SACCH by the network to the mobile station. If not all information fits into one message, the remaining information will be sent in other instances of this message. This message may contain a combination of information for e.g. 3G Neighbour Cell Description, Real Time Differences, BSICs, Report priority, Measurement parameters or 3G Measurement parameters. BIT DESCRIPTION <Measurement information> ::= < BA_IND : bit > < 3G_BA_IND : bit > < MP_CHANGE_MARK : bit > < MI_INDEX : bit (4) > < MI_COUNT : bit (4) > < PWRC : bit > < REPORT_TYPE : bit > < REPORTING_RATE : bit > < INVALID_BSIC_REPORTING : bit > {0|1 used {0|1 < Real Time Difference Description : < Real Time Difference Description struct >> } not < BSIC Description : < BSIC Description struct >> } not used

{0|1 < REPORT PRIORITY Description : < REPORT PRIORITY Description struct >> } not used {0|1 < MEASUREMENT Parameters Description : < MEASUREMENT Parameters Description struct >> } not used {0|1 < extension length : bit (8) > < spare bit (val(extension length)+1) > } used for future extensions of the 2G parameters not used {0|1 < 3G Neighbour Cell Description : < 3G Neighbour Cell Description struct >> } {0|1 < 3G MEASUREMENT Parameters Description : < 3G MEASUREMENT Parameters Description struct >> } { null | L -- Receiver compatible with earlier release |H -- Additions in release R5: { 0 | 1 < 3G ADDITIONAL MEASUREMENT Parameters Description 2 : < 3G ADDITIONAL MEASUREMENT Parameters Description 2 struct >> } } < spare padding > ;

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE MEASUREMENT INFORMATION 3BK 11203 0138 DSZZA 322/639

8 BA_IN D

1 MI_CO UNT

3G_BA MP_CH _IND ANGE_ MARK MI_COUNT PWRC

MI_INDEX REPO RT_TY PE = 1

Octet Number 1 2

BSIC REPO Measur EXTEN DESCR RT_PR ement SION IPTION IORITY Parame LENGT =0 =0 ter H=0 Descrip tion = 0 3G Neighbour cell description with variable length 3G Neighbour cell description

REPO INVALI RTD=0 RTING D_BSI _RATE C_REP =0 ORTIN G=0 3G Neighbour cell description

3G MEASUREMENT Parameters Description with variable length 3G MEASUREMENT Parameters Description with variable length

i+1 i+2 .. n

4..i

BA_IND: BCCH allocation sequence number indication It is needed to allow the network to discriminate measurement results related to different GSM Neighbour Cell lists sent to the MS. The value of this parameter is reflected in the MEASUREMENT REPORT message. 3G_BA_IND: 3G sequence number The 3G_BA_IND parameter is needed to allow the network to discriminate measurement results related to different 3G Neighbour Cell lists sent to the MS. The value of this parameter is reflected in MEASUREMENT REPORT message. MP_CHANGE_MARK: measurement parameters change mark This parameter is used to indicate the MS a change of information concerning REPORT PRIORITY, MEASUREMENT INFORMATION and 3G MEASUREMENT INFORMATION. MI_INDEX and MI_COUNT: The purpose of the MI_INDEX and MI_COUNT fields is to indicate the number of individual messages within the sequence of MEASUREMENT INFORMATION messages and to assign an index to identify each of them. The MI_INDEX field is binary coded, range 0 to 15, and provides an index to identify the individual MEASUREMENT INFORMATION message. The MI_COUNT field is binary coded, range 0 to 15, and provides the MI_INDEX value for the last (highest indexed) message in the sequence of MEASUREMENT INFORMATION message. PWRC: Power control indicator. same as e.g. SI3 &6.45. Bit: 0 MS shall include measurement on the BCCH carrier. PWRC is not set. 1 MS shall not include measurement on the BCCH carrier. PWRC is set. REPORT_TYPE: This parameter is used to indicate to the mobile to use the Enhanced Measurement report or Measurement report messages for reporting. Bit: 0 The MS shall use the Enhanced Measurement Report message for reporting if at least one BSIC is allocated to each BA (list) frequency. Not used. 1 The MS shall use the Measurement Report message for reporting. REPORTING_RATE: This parameter is used for measurements. ED EVOLIUM 05 RELEASED LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE MEASUREMENT INFORMATION 3BK 11203 0138 DSZZA 323/639

0138_05.doc 15/02/2008

Bit: 0 SACCH 1 Not used. INVALID_BSIC_REPORTING: This field specifies if cells with invalid BSIC and allowed NCC part of BSIC are allowed to be reported or not. Bit: 0 Report on cells with invalid BSIC and allowed NCC part of BSIC is not allowed. 1 Not used. RTD: Real Time Difference Description Not used. BSIC Description: Used to create the GSM Neighbour Cell list Not used. REPORT PRIORITY DESCRIPTION: Not used. MEASUREMENT Parameters Description: Not used. EXTENSION LENGTH: Used for future extensions of the 2G parameters. Not used. 3G NEIGHBOUR CELL DESCRIPTION < 3G Neighbour Cell Description struct > ::= { 0 | 1 < 3G_Wait : bit (3) > } { 0 | 1 < Index_Start_3G : bit (7) > } { 0 | 1 < Absolute_Index_Start_EMR : bit (7) > not used} { 0 | 1 < UTRAN FDD Description : < UTRAN FDD Description struct >> } { 0 | 1 < UTRAN TDD Description : < UTRAN TDD Description struct >> not used} { 0 | 1 < CDMA2000 Description : < CDMA2000 Description struct >> not used} ; 3G-WAIT (3 bits) When 3G_BA_IND is received in a changed state, this parameter indicates the number of instances of MEASUREMENT INFORMATION messages that contain 3G Neighbour Cell Description which shall be received before the MS reports on the new 3G Neighbour Cell list. Two different instances of MEASUREMENT INFORMATION messages are two MEASUREMENT INFORMATION messages with different MI_INDEX. bit 321 000 1 instance that contain 3G Neighbour Cell Description shall be received 001 2 instances that contain Neighbour Cell Description shall be received : : 111 8 instances that contain Neighbour Cell description shall be received Index_Start_3G (7 bit) This optional information element indicates the binary value of the first index to use to build this instance of the 3G Neighbour Cell list. In the first instance (i.e. when MI_INDEX = 0) this parameter is not sent. Absolute_Index_Start_EMR (7 bit) This parameter indicates in binary the value to be added to the indexes of the 3G Neighbour Cell list for reporting 3G Cells with the ENHANCED MEASUREMENT REPORT message. If different values are received for this parameter in different instances of this message, the ED EVOLIUM 05 RELEASED LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE MEASUREMENT INFORMATION 3BK 11203 0138 DSZZA 324/639

0138_05.doc 15/02/2008

instance with the highest index shall be used. If this parameter is absent in all instances of the message, the value "0" shall be used. 0: Not used. UTRAN FDD Description: < UTRAN FDD Description struct > ::= { 0 | 1 < Bandwidth_FDD : bit (3) > } { 1 < Repeated UTRAN FDD Neighbour Cells : < Repeated UTRAN FDD Neighbour Cells struct >> } ** 0 ; Bandwidth_FDD (3bit field) This optional information element will be used for future releases of the protocol. When missing, this indicates the present FDD bandwidth. When present, this shall not be considered as an error; indices of the 3G Neighbour Cell list shall be incremented accordingly. 0: not used. < Repeated UTRAN FDD Neighbour Cells struct > ::= 0 < FDD-ARFCN : bit (14) > -- The value 1 was used in an earlier version of -- the protocol and shall not be used. < FDD_Indic0 : bit > < NR_OF_FDD_CELLS : bit (5) > < FDD_CELL_INFORMATION Field : bit(p(NR_OF_FDD_CELLS)) > ; FDD_ARFCN (14 bit field) This optional information element is defined as the UARFCN in 3GPP TS 25.101. Set from O&M parameter. FDD_Indic0, information 0 indicator (1 bit): This field indicates if the FDD_CELL_INFORMATION parameter value '0000000000' is a member of the set. Bit 0parameter value '0000000000' is not a member of the set 1parameter value '0000000000' is a member of the set NOTE:This bit FDD_Indic0 is equivalent to the bit F0 bit in the frequency list information element. Refer to 3GPP TS44.018 10.5.2.13. NR_OF_FDD_CELLS (5 bit field) This field defines the number of FDD_CELL_INFORMATION parameters. Set from O&M parameter. FDD_CELL_INFORMATION Field (p bit field) This field allows to compute a set of 10-bit-long FDD_CELL_INFORMATION parameters, re-using the Range 1024 format compression algorithm. The consecutive parameters of this field are concatenated, starting with w1, and then w2, w3 The total number of bits p of this field depends on the value of the parameter NR_OF_FDD_CELLS = n, as follows: n p n p n p n p 0 0 5 44 10 81 15 116 1 10 6 52 11 88 16 122 2 19 7 60 12 95 17-31 0 3 28 8 67 13 102 4 36 9 74 14 109 Note: in B9, n = 1..8. For each (10-bit-long) decoded Parameter, bits 1-9 are the Scrambling Code and bit 10 is the corresponding Diversity Parameter. Bit 10 is the most significant bit. ED EVOLIUM 05 RELEASED LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE MEASUREMENT INFORMATION 3BK 11203 0138 DSZZA 325/639

0138_05.doc 15/02/2008

UTRAN TDD Description 0: not used CDMA2000 Description 0: not used. 3G MEASUREMENT Parameters Description Refer to the following for bit description.
8 7 6 5 3G measure ment Paramete rs Descriptio n=1 FDD_MULTIRAT_RE PORTING FDD_RE TDD_MU PORTIN LTIRAT_ G_THRE REPORTI SHOLD NG = 0 Qsearch_C

3 3G_SEA RCH_PRI O

2 FDD_RE P_QUAN T=1

1 1

Octet Number I

1 TDD_RE PORTIN G_OFFS ET = 0

FDD_REPORTING_OFFSET CDMA20 CDMA20 00_MULT 00_REP IRAT_RE ORTING_ PORTIN OFFSET G=0 =0 SP

FDD_REPORTING_T HRESHOLD SP SP

I+1 I+2

Note: 3G MEASUREMENT Parameters Description may start at any of 1-8 bit one octect. < 3G MEASUREMENT PARAMETERS Description struct > ::= < Qsearch_C : bit (4) > < 3G_SEARCH_PRIO: bit (1) > < FDD_REP_QUANT : bit (1) > -- FDD Parameters {0|1 < FDD_MULTIRAT_REPORTING : bit (2) > } {0|1 < FDD_REPORTING_OFFSET : bit (3) > < FDD_REPORTING_THRESHOLD : bit (3) > } {0|1 {0|1 < TDD_MULTIRAT_REPORTING : bit (2) > } -- TDD Parameters not used. < TDD_REPORTING_OFFSET : bit (3) > < TDD_REPORTING_THRESHOLD : bit (3) > } not used. -- CDMA2000 Parameters

{0|1 < CDMA2000_MULTIRAT_REPORTING : bit (2) > } not used. {0|1 < CDMA2000_REPORTING_OFFSET : bit (3) > < CDMA2000_REPORTING_THRESHOLD : bit (3) > } ; not used.

Indicates if 3G cells may be searched when BSIC decoding is required, 0 = no, 1 = yes Set from O&M parameter. FDD_REP_QUANT (1 bit) Indicates the reporting quantity for UTRAN FDD cells, 0 = RSCP, 1 = Ec/No FDD_MULTIRAT_REPORTING : bit (2), range 0 to 3. ED EVOLIUM 05 RELEASED

Qsearch_C (4 bits, range 0-15) Threshold for MS to search 3G cells, whether the received signal level of the serving cell is below or above the threshold. 3G_SEARCH_PRIO (1 bit)

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE MEASUREMENT INFORMATION 3BK 11203 0138 DSZZA 326/639

Number of the strongest 3G cells to be reported by the MS in the measurement report message. Set from O&M parameter. FDD_REPORTING_OFFSET : bit (3) Offset that the MS shall apply to measurements before reporting. Set from O&M parameter. FDD_REPORTING_THRESHOLD : bit (3) Threshold above which the MS shall report the measurements. Set from O&M parameter.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE MEASUREMENT INFORMATION 3BK 11203 0138 DSZZA 327/639

Example for the maximum length for 8 3G cells on maximum 3 UARFCN (2 UARFCN with 3 cells, 1 UARFCN with 2 cells). First Instance:
8 BA_IND 7 3G_BA_I ND MI_COUNT 6 MP_CHA NGE_MA RK 5 4 3 2 1 MI_COU NT = 1 Octet Number 1 2 MI_INDEX = 0 PWRC REPORT _TYPE 3G Neighbou r cell descriptio n=1 Bandwidt h_FDD = 0

BSIC DESCRIP TION=0

REPORT _PRIORI TY=0

3G_WAIT

Index_St art_3G = 0 (first instance)

MEASUR EXTENSI EMENT ON PARAME LENGTH TERS =0 DESCRIP TION=0 Absolute UTRAN Index FDD Start Desc = 1 EMR=0

REPORTI INVALID_ RTD=0 NG_RAT BSIC_RE E PORTIN G 1 3G_WAIT

FDD_ARFCN(1/3) FDD_ARFCN(1/3) Nbr of FDD cells

Repeated UTRAN FDD Neighbou r Cells = 1

FDD_AR FCN(1/3)

5 6 7 8 9 Repeated UTRAN FDD Neighbou r Cells = 1 10

FDD_Indi Nbr of FDD cells (e.g. c0 = 3) FDD_CELL_INFORMATION Field

FDD_CELL_INFORMATION Field (e.g. = p(3) = 28 bits) FDD_CELL_INFORMATION Field

FDD_ARFCN(2/3) FDD_ARFCN(2/3) Nbr of FDD cells (e.g. = 3)

11 12 13 14

FDD_Indi c0 FDD_CELL_INFORMATION Field

FDD_CELL_INFORMATION Field (e.g. = p(3) = 28 bits) FDD_CE LL_INFO RMATIO N Field End of UTRAN CDMA 3G Repeated TDD 2000 measure Utran Descriptio Descriptio ment FDD n=0 n=0 Paramete Neighbou rs r cells = 0 Descriptio n = 0 (no enough place) SP SP SP

15 16 17

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE MEASUREMENT INFORMATION 3BK 11203 0138 DSZZA 328/639

Second Instance:
8 BA_IND 7 3G_BA_I ND MI_COUNT 6 MP_CHA NGE_MA RK 5 4 3 2 1 MI_COU NT = 1 Octet Number 1 2 MI_INDEX = 1 PWRC REPORT _TYPE 3G Neighbou r cell descriptio n=1

BSIC DESCRIP TION=0

REPORT _PRIORI TY=0

3G_WAIT Index Start 3G

1 Absolute Index Start EMR=0

MEASUR EXTENSI EMENT ON PARAME LENGTH TERS =0 DESCRIP TION=0 UTRAN FDD Desc = 1 Bandwidt h_FDD = 0

REPORTI INVALID_ RTD=0 NG_RAT BSIC_RE E PORTIN G 1 3G_WAIT

Index Start 3G 0 FDD_ARFCN(3/3)

4 5

Repeated UTRAN FDD Neighbou r Cells = 1 FDD_ARFCN(3/3) FDD_Indi c0

6 Nbr of FDD cells (e.g. = 2) 7 8 9 10

FDD_ARFCN(3/3) Nbr of FDD cells

FDD_CELL_INFORMATION Field End of UTRAN CDMA Repeated TDD 2000 Utran Descriptio Descriptio FDD n=0 n=0 Neighbou r cells = 0 3G_SEA FDD_RE 1 RCH_PRI P_QUAN O T

FDD_CELL_INFORMATION Field

FDD_CELL_INFORMATION Field (e.g. = p(2) = 19 bits)

3G measure ment Paramete rs Descriptio n=1 FDD_MULTIRAT_RE PORTING FDD_RE TDD_MU PORTIN LTIRAT_ G_THRE REPORTI SHOLD NG = 0

Qsearch_C

11

1 TDD_RE PORTIN G_OFFS ET = 0

FDD_REPORTING_OFFSET CDMA20 CDMA20 00_MULT 00_REP IRAT_RE ORTING_ PORTIN OFFSET =0 G=0 SP

FDD_REPORTING_T HRESHOLD SP SP

12 13

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE MEASUREMENT INFORMATION 3BK 11203 0138 DSZZA 329/639

6.38 MEASUREMENT REPORT


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO SACCH 44.018

MEASUREMENT REPORT ABIS A

This message is sent on the SACCH by the Mobile Station to the network to report measurement results about the dedicated channel and about neighbour cells. From: MS INFORMATION ELEMENT NAME To: BTS TYPE COMMENT LENGTH (byte) 2 16 18 TIMER

DIRECTION

INFORMATION ELEMENT LIST

Header Measurement Results

MV

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT Send Measurement Results to the BSC Radio Measurements (ref. [12]) Power Control &radio link supervision (ref. [14]) Handover preparation (ref. [28]) ABNORMAL SITUATION

SPECIF DOC. REF.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE MEASUREMENT REPORT 3BK 11203 0138 DSZZA 330/639

6.38.1 GENERAL DESCRIPTION 8 0 0 7 0 0 6 0 0 5 0 1 4 0 0 3 1 1 2 1 0 1 0 1

Octet 1

BA used 0 spare 0 spare

DTX RXLEV - FULL-SERVING CELL Used MEAS RXLEV - SUB-SERVING CELL VAL. RXQUAL-FULL RXQUAL-SUB SERVING CELL SERVING CELL RXLEV-NCELL1

Octet 2

Octet 3 Octet 4

BSIC-NCELL 1 (high part) BSIC-NCELL 1 RXLEV-NCELL 2 (low part) (high part) BCCH-FREQ-NCELL 2 BSIC-NCELL 2 RXLEV NCELL (high part) 2 (low) BSIC-NCELL 2 RXLEV-NCELL 3 (low part) (high part) RXLEV-NCELL 3 BCCH-FREQ-NCELL 3 BSIC(high part) NCELL 3 (high) BSIC-NCELL 3 RXLEV-NCELL 4 (low part) (high part) RXLEV-NCELL 4 BCCH-FREQ-NCELL 4 (low part) BSIC-NCELL 4 RXLEV-NCELL 5 (high part) RXLEV NCELL 5 (low part) BCCH-FREQ-NCELL 5 (high part) BCCHBSIC-NCELL 5 RXLEV FREQNCELL NCELL 6 (high 5 part) (low) RXLEV NCELL 6 (low part) BCCH-FREQ-NCELL 6 (high part) BCCH-FREQBSIC-NCELL 6 NCELL 6 (low)

NO CELL-M (Low part) BCCH-FREQ-NCELL 1

NONCELL M (High)

Octet 5

Octet 6 Octet 7 Octet 8 Octet 9 Octet 10 Octet 11

Octet 12 Octet 13 Octet 14 Octet 15 Octet 16

Octet 17 Octet 18

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE MEASUREMENT REPORT 3BK 11203 0138 DSZZA 331/639

6.38.2 MEASUREMENT RESULTS TYPE: M DEFINITION To provide the results of the measurements made by the MS on the serving cell and the neighbour cells. BIT DESCRIPTION BA used 3G BA used 0 spare 8 DTX RXLEV - FULL-SERVING CELL Used MEAS RXLEV - SUB-SERVING CELL VAL. RXQUAL-FULL RXQUAL-SUB SERVING CELL SERVING CELL RXLEV-NCELL1 7 6 5 4 3 2 1 Octet 1 Octet 2 NONCELL M (High) Octet 3

BSIC-NCELL 1 (high part) BSIC-NCELL 1 RXLEV-NCELL 2 (low part) (high part) RXLEV BCCH-FREQ-NCELL 2 BSIC-NCELL 2 NCELL (high part) 2 (low) BSIC-NCELL 2 RXLEV-NCELL 3 (low part) (high part) RXLEV-NCELL 3 BCCH-FREQ-NCELL 3 BSIC(high part) NCELL 3 (high) BSIC-NCELL 3 RXLEV-NCELL 4 (low part) (high part) RXLEV-NCELL 4 BCCH-FREQ-NCELL 4 (low part) BSIC-NCELL 4 RXLEV-NCELL 5 (high part) RXLEV NCELL 5 (low part) BCCH-FREQ-NCELL 5 (high part) BCCHBSIC-NCELL 5 RXLEV FREQNCELL NCELL 6 (high 5 part) (low) RXLEV NCELL 6 (low part) BCCH-FREQ-NCELL 6 (high part) BCCH-FREQBSIC-NCELL 6 NCELL 6 (low)

NO CELL-M (Low part) BCCH-FREQ-NCELL 1

Octet 4 Octet 5 Octet 6 Octet 7 Octet 8 Octet 9

Octet 10 Octet 11 Octet 12 Octet 13 Octet 14

Octet 15 Octet 16

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE MEASUREMENT REPORT 3BK 11203 0138 DSZZA 332/639

SUB PARAMETER DEFINITION BA-USED : The value of the BA-IND field of the neighbour cells description information element defining the BCCH allocation used for the coding of BCCH-FREQ-NCELL fields. Range 0 to 1. This bit indicates whether or not the MS used DTX during the previous measurement period. 0 DTX was not used 1 DTX was used

DTX USED

RXLEV-FULL-SERVING CELL and RXLEV-SUB-SERVING CELL Received signal strength on serving cell measured respectively on all slots and on a subset of slots. It is coded as the binary representation of a value N (refer to GSM TS 05.08). The range is 0 to 63. MEAS-VALID : This bit indicates if the measurement results for the dedicated channel are valid or not. 0 the measurement results are valid. 1 the measurement results are not valid. 3G-BA-USED : The value of the 3G-BA-IND field of the neighbour cells description information element or elements defining the 3G Neighbour Cell list used for the coding of 3G BCCH-FREQNCELL fields. Range 0 to 1. RXQUAL FULL-SERVING-CELL RXQUAL SUB-SERVING-CELL Received signal quality on serving cell, measured respectively on all slots and on a subset of the slots. The range is 0 to 7. NO-CELL M 000 001 010 011 100 101 110 111 : Number of neighbouring cell measurements.

No Neighbour cell measurement result 1 " " " 2 " " " 3 " " " 4 " " " 5 " " " 6 " " " Neighbour cell information not available for serving cell

Note: If NO_CELL_M<6 the remaining RXLEV_NCELL i.e. BS_FREQ_NCELL-i and BSIC_BCELL-i fields (NO_CELL_M<i6) shall be coded with a "0" in each bit. RXLEV NCELL i : Range 0 to 63 If the ith neighbour cell is a GSM cell, this field is the received signal strength on the i'th neighbouring cell. If the i'th neighbour cell is a 3G cell, this field is the contents of the Ec/No. The foreseen range is 0..49 but an erroneous value (50..63) sent by a faulty MS is taken in account as received. If the i'th neighbour cell is a GAN cell, this field should always contains the value 63. If another value is received, either it is discarded or 63 is kept according to the system parameter RxLev_HO_to_GAN. BCCH FREQ NCELL i : - For GSM cell, BCCH carrier of the i'th neighbouring cell. It is the representation of the position of the i'th neighbouring cells BCCH carrier in the BCCH channel list. Range 0 to 31. - For 3G cell, this field will be coded as 31. LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE ED 05 RELEASED MEASUREMENT REPORT EVOLIUM
0138_05.doc 15/02/2008

3BK 11203 0138 DSZZA

333/639

BSIC NCELL i : Range 0 to 63. For GSM cell, this field is Base Station identity code for the i'th neighbouring cell. For 3G cell, this field carries the index of the i'th 3G neighbour cell in the 3G neighbour cell list. PARAMETER ORIGIN - ACTION ON PARAMETER This information is used by the BSC to perform pre-processing, power control and handover evaluation.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE MEASUREMENT REPORT 3BK 11203 0138 DSZZA 334/639

6.39 NOTIFICATION/FACCH
NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO FACCH 44.018 This message is sent, in unacknowledged mode using the RR short protocol discriminator by the network to notify the mobile stations in dedicated mode or in on-going voice broadcast calls or voice group calls on other voice broadcast calls or voice group calls in that cell. From: BTS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST To: MS TYPE COMMENT LENGTH (bits) 1 5 2 176 176 184 TIMER NOTIFICATION/FACCH ABIS A

DIRECTION

RR short PD Message type Short layer2 header Group Call information Paging Information MAXIMUM IMPLEMENTATION LENGTH The message shall not exceed a maximum length of 23 octets. NORMAL SITUATION ABNORMAL SITUATION

FOLLOWING EVENT SPECIF DOC. REF. See ref [36]

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE NOTIFICATION/FACCH 3BK 11203 0138 DSZZA 335/639

6.39.1 GENERAL DESCRIPTION <NOTIFICATION FACCH> ::= <RR short PD : bit> <message type : bit(5)> <short layer 2 header : bit(2)> {0 <Group Call information> |1 <Paging Information>} { null |L |H -- Additions in Release 6 : { 0 | 1 < CELL_GLOBAL_COUNT: bit (2) > < B22_COUNT:bit >} {0 | 1 < VSTK_RAND : bit (36) >} } <spare padding> ; <Group Call Reference : bit(36)> {0|1 <Group Channel Description>} ;

<Group Call information> ::=

<Group Channel Description> : := <Channel Description : bit(24)> {0 -- Non hopping case |1 {0 <Mobile Allocation : <bit string>> |1 <Frequency Short List : bit(64)>}} ; <Paging Information> ::= <mobile identity : <bit string>> <channel first: bit(2)> {0|1 <eMLPP priority : bit(3)>} ;

<bit string> ::= null | bit <bit string> ;

6.39.2 NOTIFICATION/FACCH with Group call Information BIT DESCRIPTION Notification/FACCH without Group Channel Description 8 0(header) 1 2 3 4 5 RR short PD 0 7 6 5 Message type 4 3 2 1

Short layer 2 header

Group call Reference 0 Spare paddin g 1 Spare paddin g 1

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE NOTIFICATION/FACCH 3BK 11203 0138 DSZZA 336/639

.. 22

Spare paddin g 0 Spare paddin g 0

Spare paddin g 0 Spare paddin g 0

Spare paddin g 1 Spare paddin g 1

Spare Spare paddin paddin g g 0 1 . Spare paddin g 0 Spare paddin g 1

Spare paddin g 0 Spare paddin g 0

Spare paddin g 1 Spare paddin g 1

Spare paddin g 1 Spare paddin g 1

Notification/FACCH with Group Channel Description Non hopping case

8 0(header) 1 2 3 4 5 6 7 8 RR short PD 0

5 Message type

Short layer 2 header

Group call Reference 1 Channel type and TDMA offset cont TSC H Spare Spare Cont 0 0 0 A R F C N (low part) TN Channel type and TDMA offset TSC

ARFCN (Hpart) 0 Spare paddin g 1 Spare paddin g 1 Spare paddin g 1

.. 22

Spare paddin g 0 Spare paddin g 0

Spare paddin g 0 Spare paddin g 0

Spare paddin g 1 Spare paddin g 1

Spare Spare paddin paddin g g 0 1 . Spare paddin g 0 Spare paddin g 1

Spare paddin g 0 Spare paddin g 0

Spare paddin g 1 Spare paddin g 1

Notification/FACCH with Group Channel Description Hopping case with mobile allocation 8 0(header) 1 ED EVOLIUM 05 RR short PD 0 RELEASED 7 6 5 Message type 4 3 2 1 Short layer 2 header

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE NOTIFICATION/FACCH 3BK 11203 0138 DSZZA 337/639

3 4 5 6 7 8 9 10 ..

Group Call Reference 1 Channel type and TDMA offset cont TSC H (High part) Cont 1 HSN MA C 8n MA C 8 Spare paddin g 0 Spare paddin g 0 MA C 8n-1 TN MAIO Channel type and TDMA offset TSC (low part) 1 0 MA C 8n-7 MA C 1 Spare paddin g 1 Spare paddin g 1

Length of Mobile alloc. Contents =n (n < 8) See note

10 +(n-1) 10+ n

..

Spare paddin g 0 Spare paddin g 0

Spare paddin g 1 Spare paddin g 1

22

Spare Spare paddin paddin g g 0 1 . Spare paddin g 0 Spare paddin g 1

Spare paddin g 0 Spare paddin g 0

Spare paddin g 1 Spare paddin g 1

Note: According to ref.[38], If NF mod 8 <> 0 then bits NF (NF: Number of Frequencies defined by the CA (Cell Channel Description in the System Information Type 1 message) to 8n in octet 10 must be coded with a "0" in each. For example, if NF = 12, then Mobile Allocation is coded as follow: 10 11 9 0 MAC 8 0 MAC 7 Length of Mobile alloc. Contents = 2 0 0 MAC 6 MAC 5 MAC 12 MAC 4 MAC 11 MAC 3 MAC 10 MAC 2 MAC 9 MAC 1

Notification/FACCH carries Group Call Information with Group Channel Description Hopping case with frequency short list 8 0 (header) 1 2 3 ED EVOLIUM 05 RELEASED RR short PD 0 7 6 5 Message type 4 3 2 1 Short layer 2 header

Group Call Reference LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE NOTIFICATION/FACCH 3BK 11203 0138 DSZZA 338/639

0138_05.doc 15/02/2008

5 6 7 8 9 10 11 12 13 14 15 16 17 Spare paddin g 0 Spare paddin g 0 Spare paddin g 0 Spare paddin g 0 Spare paddin g 1 Spare paddin g 1 Spare Spare paddin paddin g g 0 1 . Spare paddin g 0 Spare paddin g 1 Frequency short list Channel type and TDMA offset cont TSC H (High part) Cont 1 HSN TN MAIO

Channel type and TDMA offset TSC (low part) 1 1

.. 22

Spare paddin g 0 Spare paddin g 0

Spare paddin g 1 Spare paddin g 1

Spare paddin g 1 Spare paddin g 1

6.39.3 PARAMETER DESCRIPTION 6.39.3.1 Group Call Reference In the message notification/facch the group call reference only contains octets n-n+4 and bits 5 to 8 of octet n+4. The description is given in a byte aligned format for readability. 8 7 6 5 4 3 2 1 octet n Group or Broadcast call reference octet n+1 octet n+2 SF Ciphering information AF 0 call priority Spare (not used) 0 0 0 octet n+3 octet n+4

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE NOTIFICATION/FACCH 3BK 11203 0138 DSZZA 339/639

Group or Broadcast call reference : A bit(27) string identifying the voice group call in case of VGCS. SF Service flag 0 1 VBS (broadcast call reference) Not used VGCS (group call reference)

AF Acknowledgement flag, network to MS direction: 0 1 acknowledgement is not required acknowledgement is required Not used

Call priority Set to the value received in the VGCS assignement request message 0 0 0 0 1 1 1 1 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 no priority applied call priority level 4 call priority level 3 call priority level 2 call priority level 1 call priority level 0 call priority level B call priority level A

Ciphering information 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 no ciphering ciphering with cipher key number 1 Not used ciphering with cipher key number 2 Not used ciphering with cipher key number 3 Not used ciphering with cipher key number 4 Not used ciphering with cipher key number 5 Not used ciphering with cipher key number 6 Not used ciphering with cipher key number 7 Not used ciphering with cipher key number 8 Not used ciphering with cipher key number 9 Not used ciphering with cipher key number A Not used ciphering with cipher key number B Not used ciphering with cipher key number C Not used ciphering with cipher key number D Not used ciphering with cipher key number E Not used ciphering with cipher key number F Not used

6.39.3.2 Group Channel Description The <Group Channel Description> field is optionally present. When present only the Channel description is provided in the case of non hopping channels. In the case where the channel is hopping then either a mobile allocation or a frequency short list is provided. LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE NOTIFICATION/FACCH 3BK 11203 0138 DSZZA 340/639

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

6.39.3.2.1 Channel description SUB PARAMETER DEFINITION Octet 1 Channel type and TDMA offset. Bits 8 7 6 5 4 0 0 0 0 1 TCH/FS + ACCHs (speech codec version 1) 0 0 0 1 T TCH/HS + ACCHs (speech codec version 1) 1 0 0 0 0 TCH/FS + ACCHs (speech codec version 2) (not used) 0 0 1 T T SDCCH/4 + SACCH/C4 (not used) 0 1 T T T SDCCH/8 + SACCH/C8 (not used) all other values are reserved. T bit indicates the Subchannel Number. TN : Time slot (0 to 7) Octets 2 and 3: TSC : Training Sequence Code (0 to 7) H : "0" Single RF channel "1" RF hopping channel

Channel selector: H = "0": The channel selector field consists of the absolute RF channel number. Bits 4 3 0 0 spare ARFCN: Octet 2 Octet 3 Bits 2,1 High part of ARFCN Bits 8 to 1 ARFCN low part

The ARFCN is coded as the binary representation of the absolute RF channel Number. Range 0 to 1023. H = "1": The channel selector field consists of the mobile allocation index offset, MAIO, and the hopping sequence number, HSN. Bits 4 to 1 High part Bits 8 to 7 Low part

MAIO: Octet 2 Octet 3

HSN (Octet 3, Bits 1 to 6) Value 0 to 63. The HSN field is coded as the binary representation of the hopping sequence number.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE NOTIFICATION/FACCH 3BK 11203 0138 DSZZA 341/639

6.39.3.2.2 Mobile allocation DEFINITION To provide the part of the RF channels belonging to the cell allocation which is used in the Mobile Station hopping sequence. BIT DESCRIPTION 8 MA C 8n MA C 8 7 MA C 8n-1 6 5 4 3 2 1 MA C 8n-7 MA C 1 Length of Mobile alloc. contents 8

MA length depends on the relative frequency span of the frequencies in the cell allocation frequency list

MA Ci: Mobile Allocation RF channel i - the RF channels represented in the MA Ci bit fields are those which in the cell channel description information element are coded with "1" in the CA ARFCN N bit fields. MA Ci = CA ARFCN N(i) i = 1,2...NF

(NF = Number of Frequencies in the CA frequency list). For a RF channel belonging to the Mobile Allocation the MA Ci bit is coded with a "1", for a RF channel not belonging to the Mobile Allocation, the MA Ci bit is coded with a "0". For example, if NF = 12, then Mobile Allocation is coded as follow: 0 MAC 8 0 MAC 7 Length of Mobile alloc. Contents = 2 0 0 MAC 6 MAC 5 MAC 12 MAC 4 MAC 11 MAC 3 MAC 10 MAC 2 MAC 9 MAC 1

6.39.3.3 Frequency short list The Frequency Short List information element is element of 64 bits length. This element is encoded exactly as the Frequency List information element, except that it has a fixed length instead of a variable length and does not contain a length indicator and that it shall not be encoded in bitmap 0 format.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE NOTIFICATION/FACCH 3BK 11203 0138 DSZZA 342/639

DEFINITION To provide the absolute radio frequency channel numbers used in a cell (fixed length frequency list). BIT DESCRIPTION Range 1024 format 8 0 7 0 6 0 0 5 0 0 4 0 3 F0 0 2 1 1 0 1

1 0 FORMAT-ID

0 FORMID W(1) (low part) :

W(1) (high part)

2 3

W(2) to W(3) are on 9 bits, when present W(4) to W(7) are on 8 bits, when present W(8) to W(15) are on 7 bits, when present W(16) to W(31) are on 6 bits, when present W(2k) to W(2(k+1)- 1) are on 10-k bits Range 512 format 8 0 7 0 supported 6 0 0 5 0 0 4 0 1 3 0 2 1 1 ORIGARFCN 0 1

1 0 FORMAT-ID ORIGARFCN (low) W(1) (low part)

0 0 FORMAT-ID (continued) ORIG-ARFCN (middle part) W(1) (high part) W(2) (high part) :

3 4 5

W(2) to W(3) are on 8 bits, when present W(4) to W(7) are on 7 bits, when present W(8) to W(15) are on 6 bits, when present W(16) to W(31) are on 5 bits, when present W(2k) to W(2(k+1)- 1) are on 9-k bits Range 256 format 8 0 7 0 supported 6 0 0 5 0 0 4 0 1 3 0 2 1 1 ORIGARFCN 0 1

1 0 FORMAT-ID

0 1 FORMAT-ID (continued) ORIG-ARFCN (middle part)

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE NOTIFICATION/FACCH 3BK 11203 0138 DSZZA 343/639

ORIGARFCN (low) W(1) (low part)

W(1) (high part) W(2) :

4 5

W(2) to W(3) are on 7 bits, when present W(4) to W(7) are on 6 bits, when present W(8) to W(15) are on 5 bits, when present W(16) to W(31) are on 4 bits, when present W(2k) to W(2(k+1)- 1) are on 8-k bits Range 128 format 8 0 7 0 supported 6 0 0 5 0 0 4 0 1 3 0 2 1 1 ORIGARFCN 0 1

1 0 FORMAT-ID ORIGARFCN (low)

1 0 FORMAT-ID (continued) ORIG-ARFCN (middle part) W(1) :

3 4

W(2) to W(3) are on 6 bits, when present W(4) to W(7) are on 5 bits, when present W(8) to W(15) are on 4 bits, when present W(16) to W(31) are on 3 bits, when present W(2k) to W(2(k+1)- 1) are on 7-k bits

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE NOTIFICATION/FACCH 3BK 11203 0138 DSZZA 344/639

Variable bit map format 8 0 7 0

supported 6 0 0 5 0 0 4 0 1 3 0 2 1 1 0 1

1 1 ORIGFORMAT-ID ARFCN (continued) high ORIG-ARFCN (middle part) ORIG- RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN ARFCN 1 2 3 4 5 6 7 (low) : : RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN 31 33 34 35 36 37 38 39 Bits 5 and 6 are spare bits in octet 2. SUB PARAMETER DEFINITION FORMAT-ID F0 : Format identifier.

1 0 FORMAT-ID

3 4

: Frequency 0 indicator. Coded 0 if ARFCN 0 is not a member of the set. Coded 1 if ARFCN 0 is a member of the set.

ORIG-ARFCN : This field encodes the ARFCN of one frequency belonging to the set. This value is also used as the origin of the bit map to generate all the other frequencies. RRFCN N: Relative radio frequency channel number N - For an RF channel with ARFCN = (ORIG-ARFCN + N) mod 1024 belonging to the set, then RRFCN N bit is coded as '1'. - For an RF channel with ARFCN = (ORIG-ARFCN + N) mod 1024 not belonging to the set, then RRFCN N bit is coded as '0'. W : Each non null W(k) allows to compute, together with some previous W(i) the ARFCN F(k) of a frequency in the set (see 3GPP TS 44.018 for computation formulas).

PARAMETER ORIGIN - ACTION ON PARAMETER ORIG-ARFCN, RRFCN N : Values stored reconfigurations. in BSC and updated according to system

PARAMETER ORIGIN - ACTION ON PARAMETER

PARAMETER ORIGIN - ACTION ON PARAMETER This parameter is transparent for the BTS when received. At the BSC site, the BSC has to provide the following information: ED EVOLIUM Channel type and TDMA offset and TN depends of the resource to be allocated by the resource manager. H: fixed value according if hopping is used or not (this information has to be provided by O&M). Channel selector. 05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE NOTIFICATION/FACCH 3BK 11203 0138 DSZZA 345/639

Mobile allocation The parameter is transparent for the BTS when received from the BSC. Note: mandatory if Frequency Hopping system in used, otherwise if not sent the length is 0

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE NOTIFICATION/FACCH 3BK 11203 0138 DSZZA 346/639

6.39.4 NOTIFICATION/FACCH with paging Information BIT DESCRIPTION

8 0 (header) 1 2 3 4 RR short PD 1 Type of ID Cont ID digit 2 Cont .

5 Message type

Short layer 2 header OEI Type of ID

ID digit 1

Length of Mobile Identity contents

ID digit 3 .
Spare padding 1

ID digit 2

ID digit p Cont Spare paddin g 0 22 Spare paddin g 0

Channel first

ID digit p+1 0 1

ID digit p
Spare Spare padding padding 1 0 eMLPP priority Spare padding 1 Padding 1

Spare paddin g 0 Spare paddin g 0

Spare paddin g 1 Spare paddin g 1

Spare Spare paddin paddin g g 0 1 . Spare paddin g 0 Spare paddin g 1

Spare paddin g 0 Spare paddin g 0

Spare paddin g 1 Spare paddin g 1

Spare paddin g 1 Spare paddin g 1

6.39.4.1 Mobile Identity TYPE: M DEFINITION To provide either the IMSI, the TMSI or the IMEI. IMEISV is not used. Note IMSI 15 digits TMSI = 4 octets IMEI = 15 digits SUB PARAMETER DEFINITION Type of ID: 001 010 011 100 IMSI IMEI IMEISV TMSI Not used Not used LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE NOTIFICATION/FACCH 3BK 11203 0138 DSZZA 347/639

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

000 No identity other values reserved OEI: Odd Even Indicator value

Not used

0: even number of identity digits (even for TMSI) 1: odd number of digits

Filled digit :1 1 1 1 Octet 2 For the IMSI and the IMEI this field is coded using BCD coding. If the number of identify digits is even then bits 5 to 8 of the last octet shall be filled with an end mark coded as '1111'. If the mobile identity is the TMSI then bits 5 to 8 of octet 2 is coded as '1111' and bit 8 of octet 3 is the most significant bit, and bit 1 of the last octet is the least significant bit. PARAMETER ORIGIN - ACTION ON PARAMETER BSC transparent.

6.39.4.2 Channel first 7 0 0 1 1 6 0 1 0 1 Any channel. SDCCH. Not used TCH/F (Full rate). Not used TCH/H or TCH/F (Dual rate) Not used.

6.39.4.3 eMLPP priority 0 0 0 0 1 1 1 1 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 no priority applied call priority level 4 call priority level 3 call priority level 2 call priority level 1 call priority level 0 call priority level B call priority level A

PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE NOTIFICATION/FACCH 3BK 11203 0138 DSZZA 348/639

6.40 NOTIFICATION/NCH
NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO NCH 44.018 This message is sent on the NCH by the network to notify mobile stations of VBS or VGCS calls in the current cell. The VBS or VGCS calls are identified by their broadcast call reference or group call reference, respectively. For each reference, the corresponding VBS or VGCS call channel may be indicated. From : BTS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST L2 Pseudo Length Header NT/N Rest Octets MV MV MV To : MS TYPE COMMENT LENGTH (byte) 1 2 20 23 TIMER NOTIFICATION/NCH ABIS A

DIRECTION

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. See ref [36] ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE NOTIFICATION/NCH 3BK 11203 0138 DSZZA 349/639

6.40.1 GENERAL DESCRIPTION L2 Pseudo length 0 8 0 0 0 7 0 0 0 6 0 1 0 5 0 0 0 4 0 0 0 3 1 0 0 2 1 0 1 1 0 0

NT/N Rest Octets

See CSN.1 description in 6.40.1.1

6.40.1.1 NT/N Rest Octets description NT/N Rest Octets ::= {0 I 1<NLN(NCH) : bit (2)>} <list of Group Call NCH information> { null | L | H -- Additions in Release 6: { 0 | 1 < CELL_GLOBAL_COUNT: bit (2) >} < List of Reduced GCR > < List of VSTK_RAND information > } <Spare padding>; <List of Group Call NCH information> ::= 0 | 1 <Group Call information> <List of Group Call NCH information> ; <Group Call information> ::= <Group Call Reference : bit(36)> {0|1 <Group Channel Description>} ; <Group Channel Description> : := <Channel Description : bit(24)> {0 -- Non hopping case |1 {0 <Mobile Allocation : <bit string>> |1 <Frequency Short List : bit(64)>}} ;

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE NOTIFICATION/NCH 3BK 11203 0138 DSZZA 350/639

Case without Group Channel Description Information elements Length (bit) 1 NLN(NCH) 2 1 Group Call Reference> 36 1 1 Group Call Reference> 36 1 1 Group Call Reference> 36 1 1 Group Call Reference> 36 1 1 Spare padding 4 Coding rules
1<NLN(NCH): bit (2)>

<NLN(NCH): bit (2)>


1 <Group Call information>

<Group Call Reference: bit(36)>: for VGCS Call 1


0 (there is no group channel description) 1 <Group Call information>

<Group Call Reference: bit(36)>: for VGCS Call 2


0 (there is no group channel description) 1 <Group Call information>

<Group Call Reference: bit(36)>: for VGCS Call 3


0 (there is no group channel description) 1 <Group Call information>

<Group Call Reference: bit(36)>: for VGCS Call 4


0 (there is no group channel description) 0

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE NOTIFICATION/NCH 3BK 11203 0138 DSZZA 351/639

Case with Group Channel Description and without Frequency Hopping Information elements Length (bit) 1 NLN(NCH) 2 1 Group Call Reference> 36 1 Channel Description 24 1 1 Group Call Reference> 36 1 Channel Description 24 1 1 Spare padding 30 Coding rules
1<NLN(NCH): bit (2)>

<NLN(NCH): bit (2)>


1 <Group Call information>

<Group Call Reference: bit(36)>: for VGCS Call 1


1 <Group Channel Description>, for VGCS Call 1

<Channel Description : bit(24)>, for VGCS Call 1


0 -- Non hopping case, for VGCS Call 1

1 <Group Call information>

<Group Call Reference: bit(36)>: for VGCS Call 2


1 <Group Channel Description>, for VGCS Call 2

<Channel Description : bit(24)>, for VGCS Call 2


0 0 -- Non hopping case, for VGCS Call 2

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE NOTIFICATION/NCH 3BK 11203 0138 DSZZA 352/639

Case with Group Channel Description -Mixed Frequency Hopping and Non hopping
VGCS Call 1: Frequency Hopping with Mobile Allocation (number of Radio frequencies in the cell equal to 12, see section 6.39.3.2.2 ); VGCS Call 2: Non-hopping.

Information elements
NLN(NCH)

Length (bit)
1 2 1

Coding rules
1<NLN(NCH): bit (2)> <NLN(NCH): bit (2)> 1 <Group Call information> <Group Call Reference: bit(36)>: for VGCS Call 1 1 <Group Channel Description>, for VGCS Call 1 <Channel Description : bit(24)>, for VGCS Call 1 1 -- hopping case, for VGCS Call 1

Group Reference>

Call

36 1

Channel Description

24 1 1

0 <Mobile Allocation : <bit string>>, for VGCS Call 1

Mobile Allocation

24 1 1 <Group Call information> <Group Call Reference: bit(36)>: for VGCS Call 2 1 <Group Channel Description>, for VGCS Call 2 <Channel Description : bit(24)>, for VGCS Call 2 0 0 -- Non hopping case, for VGCS Call 2

Group Reference>

Call

36 1

Channel Description

24 1 1

Spare padding

6.40.2 PARAMETER DESCRIPTION 6.40.2.1 Notification List Number NLN(NCH) : This field gives the NLN value to be used . LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE NOTIFICATION/NCH 3BK 11203 0138 DSZZA 353/639

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

6.40.2.2 Group Call Reference See 6.39.3.1 6.40.2.3 Group channel description 6.40.2.3.1 Channel description See 6.39.3.2.1 6.40.2.3.2 Mobile Allocation See 6.39.3.2.2 6.40.2.3.3 Frequency short list See 6.39.3.3

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE NOTIFICATION/NCH 3BK 11203 0138 DSZZA 354/639

6.41 NOTIFICATION RESPONSE


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO FACCH 44.018 This message is sent by the mobile station to the network to respond on a notification for a voice group call. From: MS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST Header Mobile Station Classmark 2 Mobile Identity Group or broadcast Call reference To: BTS TYPE COMMEN T LENGTH (byte) 2 4 2-9 5 NOTIFICATION RESPONSE ABIS A

DIRECTION

M LV M LV MV

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT ABNORMAL SITUATION

20 TIMER

SPECIF DOC. REF.

See ref [36]

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE NOTIFICATION RESPONSE 3BK 11203 0138 DSZZA 355/639

6.41.1 GENERAL DESCRIPTION

8 0 0 Mobile Station Classmark 2 0 spare 0 spare CM3

7 0 0

6 0 1

5 0 0

4 0 0 A5/1 SM. cap

3 1 1

2 1 1 RF power Capability VGCS A5/3

0 0

Revision ESlevel IND PS SS Screen. Capa. Indicator 0 spare

Length of MS classmark 2 contents

VBS

FC A5/2

Identity Group or broadcast Call reference

Mobile

ID digit 1 ...

LCS UCS2 SoLSA CMSP VA CAP Length of Mobile Identity contents OEI

ID digit 3

ID digit 2 ID digit p ...

Type of ID

ID digit p+1

group or broadcast call reference SF Ciphering information AF Spare 0 Call priority Spare Spare 0 0

Spare 0

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE NOTIFICATION RESPONSE 3BK 11203 0138 DSZZA 356/639

6.41.2 MS Classmark 2 TYPE: M DEFINITION Defines certain attributes of the Mobile Station equipment in use on a particular transaction. BIT DESCRIPTION 8 0 spare 0 spare CM3 7 6 5 Length 4 3 2 RF power Capability VBS CMSP VGCS A5/3 1 1 2 FC A5/2 3 4

Revision ES level IND PS SS Screen. Capa. Indicator 0 spare LCS VA CAP

A5/1 SM. cap

UCS2

SoLSA

Bit 8 of octet 2 spare set to 0 Bits 8 of octet 3 spare set to 0 SUB PARAMETER DEFINITION Octet 2: Bits Revision level 76 00 01 10 5 0 1 Bit A5/1 Bits RF Power capability P-GSM, GSM850 and E-GSM 4 0 1 321 000 001 010 011 100 000 001 010

Bit ES-IND

Reserved for phase 1 Used by phase 2 MS Used by mobile stations supporting R99 or later versions of the protocol All other value reserved Controlled Early Classmark Sending option not implemented. Controlled Early Classmark Sending option implemented. algorithm A5/1 available algorithm A5/1 not available. class 1 class 2 class 3 class 4 class 5 All other values reserved class 1 class 2 class 3, handled as class 1 All other values reserved

DCS1800

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE NOTIFICATION RESPONSE 3BK 11203 0138 DSZZA 357/639

DCS1900

000 001 010

class 1 class 2 class 3, handled as class 1 All other values reserved

Octet 3: Bit PS Capability Bits SS Screening Indicator

Bit SM Capability Bit VBS Voice Broadcast Service Bit VGCS Voice Call Service Bit FC Capability

7 0 1 65 00 01 10 11 4 0 1 3 0

PS capability not present PS capability present Defined in GSM 04.80 Defined in GSM 04.80 Defined in GSM 04.80 Defined in GSM 04.80 MS does not support mobile terminated point to point SMS. MS supports mobile terminated point to point SMS. no VBS capability or no notifications wanted

Group

1 VBS capability and notifications wanted Not implemented in the BSS. 2 0 no VGCS capability or no notifications wanted 1 1 0 1 0 The MS does not support the extension band G1 in addition to the primary GSM band. The MS does support the extension band G1. Reserved for future use VGCS capability and notifications wanted

Frequency GSM900

GSM850, DCS1800, DCS1900

Note: only FC is checked in this release and only in GSM900 configuration.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE NOTIFICATION RESPONSE 3BK 11203 0138 DSZZA 358/639

Octet 4 Bit CM3 Classmark 3 Bit LCS VA capability

8 0 1 6 0

No additional MS capability Additional MS capabilities are described in the MS Classmark 3 information element.

Bit UCS2 treatment

Bit SoLSA Bit CMSP: CM Service Prompt

Bit A5/3 algorithm supported Bit A5/2 algorithm supported

LCS value added location request notification capability not supported 1 LCS value added location request notification capability supported Not implemented in the BSS. 5 0 the ME has a preference for the default alphabet (defined in GSM 03.38) over UCS2 1 the ME has no preference between the use of the default alphabet and the use of UCS2. Not implemented in the BSS. 4 0 The ME does not support SoLSA 1 The ME supports SoLSA. 3 0 "Network initiated MO CM connection request" not supported 1 "Network initiated MO CM connection request" supported for at least one CM protocol. Not implemented in the BSS. 2 0 A5/3 not available 1 A5/3 available 1 0 A5/2 not available 1 A5/2 available Note: only A5/2 is checked in this release.

PARAMETER ORIGIN - ACTION ON PARAMETER The BSC takes this information in order to have the MS power capability for the power control algorithm, the MS frequency capability and the MS ciphering capability. Additional mobile info can be obtained by invoking the classmark interrogation procedure.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE NOTIFICATION RESPONSE 3BK 11203 0138 DSZZA 359/639

6.41.3 Mobile Identity TYPE: M DEFINITION To provide either the IMSI, the TMSI or the IMEI. IMEISV is not used. Note IMSI 15 digits TMSI = 4 octets IMEI = 15 digits BIT DESCRIPTION 8 7 6 5 4 3 2 1

ID digit 1 ID digit 3 :

Length of Mobile Identity contents OEI

ID digit 2 :

Type of ID

ID digit p+1 SUB PARAMETER DEFINITION Type of ID: 001 IMSI 010 IMEI 011 IMEISV 100 TMSI 000 No identity other values reserved

ID digit P

Not used Not used Not used

OEI: Odd Even Indicator value 0: even number of identity digits (even for TMSI) 1: odd number of digits

Filled digit :1 1 1 1 Octet 2 For the IMSI and the IMEI this field is coded using BCD coding. If the number of identify digits is even then bits 5 to 8 of the last octet shall be filled with an end mark coded as '1111'. If the mobile identity is the TMSI then bits 5 to 8 of octet 2 is coded as '1111' and bit 8 of octet 3 is the most significant bit, and bit 1 of the last octet is the least significant bit. PARAMETER ORIGIN - ACTION ON PARAMETER BSC transparent.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE NOTIFICATION RESPONSE 3BK 11203 0138 DSZZA 360/639

6.41.4 Group or broadcast Call reference TYPE: M DEFINITION Descriptive Group or Broadcast Call Reference provides information describing a voice group or broadcast call BIT DESCRIPTION 8 7 6 5 4 3 2 1 octet 1 octet 2 octet 3 SF Ciphering information AF 0 call priority Spare 0 0 0 octet 4 octet 5

Binary coding of the group or broadcast call reference

SF Service flag (octet 5) Bit 5 0 VBS (broadcast call reference) Not used 1 VGCS (group call reference) AF Acknowledgement flag (octet 5), MS to network direction: Bit 4 is spare and shall be set to "0". Call priority (octet 5) Bits 1 to 3 are spare and shall be set to "0". Ciphering information (octet 6) Bits 5 to 8 are spare and shall be set to "0".

PARAMETER ORIGIN - ACTION ON PARAMETER Transparently sent through the BSS.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE NOTIFICATION RESPONSE 3BK 11203 0138 DSZZA 361/639

6.42 PACKET ASSIGNMENT


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO SDCCH/FACCH 44.018

PACKET ASSIGNMENT ABIS BTS Transparent A

This message is sent on the main DCCH by the network to the mobile station to change the channel configuration to a multislot configuration with CS and PS connections when neither timing adjustment nor reallocation of the CS timeslot is needed. From: BSC INFORMATION ELEMENT NAME To: MS TYPE COMMENT LENGTH (byte) 2 7-10 3-13 3-10 35 TIMER

DIRECTION

INFORMATION ELEMENT LIST

Header GPRS broadcast information RR Packet Uplink Assignment RR Packet Downlink Assignment

M LV O TLV O TLV

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT ABNORMAL SITUATION

SPECIF DOC. REF.

See ref [44]

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET ASSIGNMENT 3BK 11203 0138 DSZZA 362/639

6.42.1 GENERAL DESCRIPTION 8 7 6 0 0 5 0 0 length 4 0 1 3 1 0 2 1 1 1 0 1

0 0

0 1

GPRS broadcast information 0 0 1

See description below 0 Length 0 0 1 0

RR Packet Uplink Assignment

See description below 0 0 1 0 Length 0 0 1 1

RR Packet Downlink Assignment

See description below

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET ASSIGNMENT 3BK 11203 0138 DSZZA 363/639

6.42.2 GPRS broadcast information The GPRS broadcast informationi information element provides the mobile station with relevant GPRS information needed for correct DTM operation. < GPRS broadcast information value part > ::= < GPRS Cell Options : < GPRS Cell Options IE > > < GPRS Power Control Parameters : < GPRS Power Control Parameters struct > > < spare bit >**; 6.42.2.1 GPRS Cell Options TYPE: O DEFINITION The GPRS Cell Options information element is used to control a set of cell options related to GPRS. BIT DESCRIPTION

< GPRS Cell Options IE > ::= < NMO : bit (2) > < T3168 : bit (3) > < T3192 : bit (3) > < DRX_TIMER_MAX : bit (3) > < ACCESS_BURST_TYPE : bit > < CONTROL_ACK_TYPE : bit > < BS_CV_MAX : bit (4) > {0|1 < PAN_DEC : bit (3) > (Note 1) < PAN_INC : bit (3) > < PAN_MAX : bit (3) > } -- Optional extension information, {0|1 <Extension Length : bit (6)> (Note 2) < bit (val(Extension Length) + 1) & { <Extension Information > ! { bit ** = <no string> } } > } ; < Extension Information> : : = { 0 | 1 EGPRS supported by the cell if the choice bit is set to '1' <EGPRS_PACKET_ CHANNEL_REQUEST : bit> < BEP_PERIOD : bit (4) > } <PFC_FEATURE_MODE: bit> <DTM_SUPPORT: bit> <BSS_PAGING_COORDINATION: bit> -- REL-4 extension: < CCN_ACTIVE : bit > < NW_EXT_UTBF : bit >; -- REL 6 extension: < MULTIPLE_TBF_CAPABILITY : bit > < EXT_UTBF_NO_DATA : bit > < DTM_ENHANCEMENTS_CAPABILITY : bit > {0 -- MBMS procedures not supported by the cell if the choice bit is set to '0' (Note 3) |1 -- MBMS procedures supported by the cell if the choice bit is set to '1' < DEDICATED_MODE_MBMS_NOTIFICATION_SUPPORT: bit > < MNCI_SUPPORT : bit > } <spare bit > ** ; Note 1: PAN_DEC, PAN_INC, PAN_MAX should be present. Note 2: Extension information should be present. Note 3: MBMS procedures are not supported. ED EVOLIUM 05 RELEASED LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET ASSIGNMENT 3BK 11203 0138 DSZZA 364/639

0138_05.doc 15/02/2008

SUB PARAMETER DEFINITION NMO (2 bit field) This field is the binary representation of the Network Mode of Operation, see 3GPP TS 03.60: 00 Network Mode of Operation I 01 Network Mode of Operation II 10 Network Mode of Operation III 11 Reserved.

T3168 (3 bit field) This field is the binary representation of the timeout value of timer T3168. Range: 0 to 7. The timeout value is given as the binary value plus one in units of 500 millisecond.

T3192 (3 bit field) This field is the binary representation of the timeout value of timer T3192. Range: 0 to 7. The timeout value is given as follows: 000 500 msec 001 1000 msec 010 1500 msec 011 0 msec 100 80 msec 101 120 msec 110 160 msec 111 200 msec DRX_TIMER_MAX (3 bit field) This field is the binary representation of the parameter DRX_TIMER_MAX. Range: 0 to 7. The parameter value is given as two taken to the power of the binary value minus one (2 (bv - 1) ) in units of 1 second. The binary value zero indicates the parameter value zero (i.e, the parameter takes the values: 0, 1 s, 2 s, 4 s, .. 64 s.) ACCESS_BURST_TYPE (1 bit field) The ACCESS_BURST_TYPE field indicates if the 8 or 11 bit format shall be used in the PACKET CHANNEL REQUEST message, the PTCCH uplink block (3GPP TS 04.04) and in the PACKET CONTROL ACKNOWLEDGMENT message when the format is four access bursts. The field is coded as follows: 0 8-bit format shall be used 1 11-bit format shall be used CONTROL_ACK_TYPE (1 bit field) This field is the binary representation of the default format of the PACKET CONTROL ACKNOWLEDGMENT message: 0 default format is four access bursts 1 default format is RLC/MAC control block. (not used)

BS_CV_MAX (4 bit field) This field is the binary representation of the parameter BS_CV_MAX. Range: 0 to 15. The value BS_CV_MAX=0 shall be interpreted as value BS_CV_MAX=1 for calculation of T3198, T3200 and N3104max values PAN_DEC (3 bit field) This field is the binary representation of the parameter PAN_DEC. If the field in not included, the default value 0 shall be used. Range: 0 to 7.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET ASSIGNMENT 3BK 11203 0138 DSZZA 365/639

PAN_INC (3 bit field) This field is the binary representation of the parameter PAN_INC. If the field in not included, the default value 0 shall be used. Range: 0 to 7.

PAN_MAX (3 bit field) This field defines the maximum value allowed for counter N3102. 000 maximum value allowed for counter N3102 is 4 001 maximum value allowed for counter N3102 is 8 ... 111 maximum value allowed for counter N3102 is 32 If the PAN_MAX field in not included, the default value 0 (i.e. N3102 max = 4) shall be used. Optional extension information: EGPRS_PACKET_CHANNEL_REQUEST (1 bit field) 0 EGPRS capable MSs shall use EGPRS PACKET CHANNEL REQUEST message for uplink TBF establishment on the PRACH when there is a PBCCH in the cell or on the RACH when there is no PBCCH in the cell. EGPRS capable MSs shall use two phase packet access with PACKET CHANNEL REQUEST message on the PRACH for uplink TBF establishment when there is a PBCCH in the cell. EGPRS capable MSs shall use two phase packet access with CHANNEL REQUEST message on the RACH when there is no PBCCH in the cell.

(not used)

BEP_PERIOD (4 bit field)

This field contains the bit error probability (BEP) filter averaging period

PFC_FEATURE_MODE (1 bit field) 0 1 The network does not support packet flow context procedures. The network supports packet flow context procedures.

DTM_SUPPORT (1 bit field) 0 1

This field indicates whether the cell supports DTM or not. It is coded as follows: The cell does not support DTM procedures. The cell supports DTM procedures.

BSS_PAGING_COORDINATION (1 bit field)

This field indicates the network support of CS paging co-ordination in packet transfer mode during network mode of operation II and III. This field shall be ignored by the mobile station during network mode of operation I. It is coded as follows: 0 1 The cell does not support Circuit-Switched paging co-ordination The cell supports Circuit-Switched paging co-ordination (not used)

CCN_ACTIVE (1 bit field) This field indicates whether the cell supports Network Assisted Cell Change (NACC) or not. It is coded as follows : 0 The cell does not support NACC procedures. 1 The cell supports NACC procedures. ED EVOLIUM 05 RELEASED LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET ASSIGNMENT 3BK 11203 0138 DSZZA 366/639

0138_05.doc 15/02/2008

NW_EXT_UTBF (1 bit field) This field indicates whether the cell supports Uplink Extended TBF mode or not. It is coded as follows : 0 The cell does not support Extended UL TBF mode procedures. 1 The cell supports Extended UL TBF mode procedures. MULTIPLE_TBF_CAPABILITY (1 bit field) This field indicates whether or not the cell supports multiple TBF procedures for A/Gb mode. It is coded as follows : 0 The cell does not support multiple TBF procedures for A/Gb mode. 1 The cell supports multiple TBF procedures for A/Gb mode. (not used) EXT_UTBF_NO_DATA (1 bit field) This field indicates whether the mobile station during extended uplink TBF mode may refrain from sending PACKET UPLINK DUMMY CONTROL BLOCK messages when there is no other RLC/MAC block ready to send in an uplink radio block allocated by the network. It is coded as follows : 0 The mobile station shall send a PACKET UPLINK DUMMY CONTROL BLOCK message when there is no other RLC/MAC block ready to send in an uplink radio block allocated by the network. 1 The mobile station may refrain from sending a PACKET UPLINK DUMMY CONTROL BLOCK message when there is no other RLC/MAC block ready to send in an uplink radio block allocated by the network. DTM_ENHANCEMENTS_CAPABILITY (1 bit field) This field indicates whether the cell supports enhanced DTM CS establishment and enhanced DTM CS release or not. It is coded as follows : 0 The cell does not support enhanced DTM CS establishment and enhanced DTM CS release. 1 The cell supports enhanced DTM CS establishment and enhanced (not used) DTM CS release. DEDICATED_MODE_MBMS_NOTIFICATION_SUPPORT (1 bit field) This field indicates whether the cell supports Dedicated Mode MBMS Notification or not. It is coded as follows: 0 The cell does not support the Dedicated Mode MBMS Notification (not used) procedures. 1 The cell supports the Dedicated Mode MBMS Notification procedures. (not used) MNCI_SUPPORT (1 bit field) This field indicates whether the cell supports the distribution of MBMS NEIGHBOURING CELL INFORMATION messages. It is coded as follows: 0 The cell does not support the distribution of MBMS NEIGHBOURING (not used) CELL INFORMATION messages 1 The cell supports the distribution of MBMS NEIGHBOURING CELL (not used) INFORMATION messages

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET ASSIGNMENT 3BK 11203 0138 DSZZA 367/639

PARAMETER ORIGIN - ACTION ON PARAMETER

6.42.2.2 GPRS Power Control Parameters TYPE: O DEFINITION BIT DESCRIPTION < ALPHA : bit (4) > < T_AVG_W : bit (5) > < T_AVG_T : bit (5) > < PC_MEAS_CHAN : bit > < N_AVG_I : bit (4) >;

SUB PARAMETER DEFINITION ALPHA (4 bit field) The ALPHA field is the binary representation of the parameter for MS output power control in units of 0.1, see 3GPP TS 05.08: Range: 0 to 10. Values greater than 10 shall be interpreted as 10 by the mobile station.

T_AVG_W (5 bit field) The T_AVG_W field is the binary representation of the parameter TAVG_W for MS output power control, see 3GPP TS 05.08: Range: 0 to 25. Values greater than 25 shall be interpreted as 25 by the mobile station. T_AVG_T (5 bit field) The T_AVG_T field is the binary representation of the parameter TAVG_T for MS output power control, see 3GPP TS 05.08: Range: 0 to 25. Values greater than 25 shall be interpreted as 25 by the mobile station.

PC_MEAS_CHAN (1 bit field) The PC_MEAS_CHAN field indicates the type of channel which shall be used for downlink measurements for power control: 0 BCCH; 1 PDCH. N_AVG_I (4 bit field) The N_AVG_I field is the binary representation of the parameter NAVG_I for MS output power control, see 3GPP TS 05.08: Range: 0 to 15. PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET ASSIGNMENT 3BK 11203 0138 DSZZA 368/639

6.42.3 RR Packet UL Assignment TYPE O DEFINITION

Describes the UL allocated resources. BIT DESCRIPTION < RR Packet Uplink Assignment value part > ::= < CHANNEL_CODING_COMMAND : bit (2) > < TLLI_BLOCK_CHANNEL_CODING : bit (1) > < Packet Timing Advance : Packet Timing Advance IE > { 01 < Dynamic Allocation : Dynamic Allocation struct > | 10 < reserved > | 11 < reserved > | 00 { 0 < Multiple TBF Allocation : Multiple TBF Allocation struct > | 1 < Extension > } } { null -- Receiver compatible with earlier release | -- Additions for R99 {0|1 < EGPRS_MCS_MODE : bit (4) > < RESEGMENT : bit (1) > < EGPRS Window Size : < EGPRS Window Size IE >> } {0|1 < Packet Extended Timing Advance : bit (2) > } < SPARE_BITS : bit ** > } ; < Packet Timing Advance IE > ::= {0|1 < TIMING_ADVANCE_VALUE : bit (6) > } {0|1 < TIMING_ADVANCE_INDEX : bit (4) > < TIMING_ADVANCE_TIMESLOT_NUMBER : bit (3) > } ; <Dynamic Allocation struct > ::= < Extended Dynamic Allocation : bit(1)> {0 | 1 < P0 : bit (4) > < PR_MODE : bit (1) > } < USF_GRANULARITY : bit (1) > { 0 | 1 < UPLINK_TFI_ASSIGNMENT : bit (5) > } 0 {0 -- Timeslot Allocation { 0 | 1 < USF_TN0 : bit (3) > } { 0 | 1 < USF_TN1 : bit (3) > } { 0 | 1 < USF_TN2 : bit (3) > } { 0 | 1 < USF_TN3 : bit (3) > } { 0 | 1 < USF_TN4 : bit (3) > } { 0 | 1 < USF_TN5 : bit (3) > } { 0 | 1 < USF_TN6 : bit (3) > } { 0 | 1 < USF_TN7 : bit (3) > } |1 -- Timeslot Allocation with Power Control Parameters < ALPHA : bit (4) > {0|1 < USF_TN0 : bit (3) > < GAMMA_TN0 : bit (5) > } {0|1 < USF_TN1 : bit (3) > < GAMMA_TN1 : bit (5) > } {0|1 < USF_TN2 : bit (3) > < GAMMA_TN2 : bit (5) > } {0|1 < USF_TN3 : bit (3) > ED EVOLIUM 05 RELEASED LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET ASSIGNMENT 3BK 11203 0138 DSZZA 369/639

0138_05.doc 15/02/2008

{0|1 {0|1 {0|1 {0|1

< GAMMA_TN3 : bit (5) > } < USF_TN4 : bit (3) > < GAMMA_TN4 : bit (5) > } < USF_TN5 : bit (3) > < GAMMA_TN5 : bit (5) > } < USF_TN6 : bit (3) > < GAMMA_TN6 : bit (5) > } < USF_TN7 : bit (3) > < GAMMA_TN7 : bit (5) > } } ;

Note : Only coding for dyanmic allocation is provided as it is the only method used in Alcatel BSS for DTM establishment (extended dynamic allocation is supported in DTM, but through TBF reallocation). SUB PARAMETER DEFINITION Field IEI Length CHANNEL_CODIN G_COMMAND Length (bits) 8 8 2 Coding Set to 00010101 Length (in bytes) of the value part of the 44.018 I.E., i.e.of the information detailed below The Channel Coding Indicator field indicates the channel coding scheme that the mobile station shall use when transmitting on the uplink. bits 21 value 00 CS-1 01 CS-2 10 CS-3 11 CS-4 This field indicates the channel coding command that the mobile station shall use for any RLC data block containing a TLLI field in the RLC data block header. This field is coded as shown: 0 the mobile station shall use CS-1 in GPRS TBF mode and MCS-1 in EGPRS TBF mode. 1 the mobile station shall use the value commanded in the CHANNEL_CODING_COMMAND or EGPRS_CHANNEL_CODING_COMMAND field. This field describes the timing advance mode and timing advance value assigned to the mobile station. Set to 00. Set to 01. This information field indicates the medium access mode to be used during the TBF. 0 Dynamic Allocation 1 Extended Dynamic Allocation Set to 0 (dynamic allocation is used) Set to 0. Set to 0. 0 the mobile station shall transmit one RLC/MAC block 1 the mobile station shall transmit four consecutive RLC/MAC blocks Set to 0. Set to 1. encoded as a binary number. Range 0 to 31 Set to 0. Set to 1. The ALPHA Power control parameter field is coded according to the following table: Bits

TLLI_BLOCK_CHA NNEL_CODING

Packet Advance

Timing

2 2 1

Extended Dynamic Allocation

USF_GRANULARI TY

1 1

UPLINK_TFI_ASSI GNMENT ALPHA

1 5 1 1 4

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET ASSIGNMENT 3BK 11203 0138 DSZZA 370/639

4321 0000 0001 ::: 1001 1010 USF_TN0 and GAMMA_TN0 to USF_TN7 and GAMMA_TN7 EGPRS_MCS_MO DE <=48

= 0.0 = 0.1 = 0.9 = 1.0

USFs of the allocated PDCHs and its GAMMA_TN. See note 1. Set to 1 if the TBF is established in EGPRS mode, set to 0 otherwise. Included only if the TBF is established in EGPRS mode. Bits 4321 0 0 0 0 MCS-1 0 0 0 1 MCS-2 0 0 1 0 MCS-3 0 0 1 1 MCS-4 0 1 0 0 MCS-5 0 1 0 1 MCS-6 0 1 1 0 MCS-7 0 1 1 1 MCS-8 1 0 0 0 MCS-9 1 0 0 1 MCS-5-7 1 0 1 0 MCS-6-9 1011 to 1 1 1 1 reserved Included only if the TBF is established in EGPRS mode. 0 Retransmitted RLC data blocks shall not be re-segmented 1 Retransmitted RLC data blocks shall be re-segmented according to commanded MCS Included only if the TBF is established in EGPRS mode. See note 2. Set to 0. Coding Indicates whether TS 0 of the TRX is allocated to the MS USF value assigned to the MS for the allocated timeslot (range 0 to 7). Included only if the timeslot is allocated to the MS. binary representation of the parameter CH for MS output power control in units of 2 dB Indicates whether TS 1 of the TRX is allocated to the MS USF value assigned to the MS for the allocated timeslot (range 0 to 7). Included only if the timeslot is allocated to the MS. binary representation of the parameter CH for MS output power control in units of 2 dB Indicates whether TS 2 of the TRX is allocated to the MS USF value assigned to the MS for the allocated timeslot (range 0 to 7). Included only if the timeslot is allocated to the MS. binary representation of the parameter CH for MS output power control in units of 2 dB LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET ASSIGNMENT 3BK 11203 0138 DSZZA 371/639

1 4

RESEGMENT

EGPRS Size Note 1: Field USF_TN0

Window

5 1 Length (bits) 1 3 5 1 3 5 1 3 5

GAMMA_TN0 USF_TN1 GAMMA_TN1 USF_TN2 GAMMA_TN2

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

USF_TN3 GAMMA_TN3 USF_TN4 GAMMA_TN4 USF_TN5 GAMMA_TN5 USF_TN6 GAMMA_TN6 USF_TN7 GAMMA_TN7

1 3 5 1 3 5 1 3 5 1 3 5 1 3 5

Indicates whether TS 3 of the TRX is allocated to the MS USF value assigned to the MS for the allocated timeslot (range 0 to 7). Included only if the timeslot is allocated to the MS. binary representation of the parameter CH for MS output power control in units of 2 dB Indicates whether TS 4 of the TRX is allocated to the MS USF value assigned to the MS for the allocated timeslot (range 0 to 7). Included only if the timeslot is allocated to the MS. binary representation of the parameter CH for MS output power control in units of 2 dB Indicates whether TS 5 of the TRX is allocated to the MS USF value assigned to the MS for the allocated timeslot (range 0 to 7). Included only if the timeslot is allocated to the MS. binary representation of the parameter CH for MS output power control in units of 2 dB Indicates whether TS 6 of the TRX is allocated to the MS USF value assigned to the MS for the allocated timeslot (range 0 to 7). Included only if the timeslot is allocated to the MS. binary representation of the parameter CH for MS output power control in units of 2 dB Indicates whether TS 7 of the TRX is allocated to the MS USF value assigned to the MS for the allocated timeslot (range 0 to 7). Included only if the timeslot is allocated to the MS. binary representation of the parameter CH for MS output power control in units of 2 dB

Note 2:

bit 54321 00000 00001 00010 00011 00100 00101 00110 00111 01000 01001 01010 01011 01100 01101 01110 01111 10000 10001 10010 10011 10100 10101 10110 05

Value of EGPRS window size 64 96 128 160 192 224 256 288 320 352 384 416 448 480 512 544 576 608 640 672 704 736 768 RELEASED

Comment

(maximum window size for a 1 timeslot TBF) (maximum window size for a 2 timeslot TBF)

(maximum window size for a 3 timeslot TBF)

(maximum window size for a 4 timeslot TBF)

(maximum window size for a 5 timeslot TBF)

ED EVOLIUM

0138_05.doc 15/02/2008

(maximum window size for a 6 timeslot TBF) LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET ASSIGNMENT 3BK 11203 0138 DSZZA 372/639

10111 11000 11001 11010 11011 11100 11101 11110 11111

800 832 864 896 928 960 992 1024 Reserved

(maximum window size for a 7 timeslot TBF)

(maximum window size for an 8 timeslot TBF)

PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET ASSIGNMENT 3BK 11203 0138 DSZZA 373/639

6.42.4 RR Packet DL Assignment TYPE O DEFINITION

Describes the DL allocated resources. BIT DESCRIPTION < RR Packet Downlink Assignment value part > ::= < MAC_MODE : bit (2) > < RLC_MODE : bit (1) > < TIMESLOT_ALLOCATION : bit (8) > < Packet Timing Advance : Packet Timing Advance IE > { 0 | 1 < P0 : bit (4) > 0 < PR_MODE : bit (1) > } { 0 | 1 < Power Control Parameters : Power Control Parameters IE > } { 0 | 1 < DOWNLINK_TFI_ASSIGNMENT : bit (5) > } 0 { null -- Receiver compatible with earlier release | {0|1 -- indicates EGPRS TBF mode, see 3GPP TS 44.060 < EGPRS Window Size : < EGPRS Window Size IE >> < LINK_QUALITY_MEASUREMENT_MODE : bit (2) > } { 0 | 1 < Packet Extended Timing Advance : bit (2) > } { null | 0 bit** = < no string > -- Receiver backward compatible |1 -- Additions for REL-6 { 1 < Multiple Downlink TBF Assignment : < Multiple Downlink TBF Assignment struct > > } ** 0 < SPARE_BITS : bit ** > } } ; < Packet Timing Advance IE > ::= {0|1 < TIMING_ADVANCE_VALUE : bit (6) > } {0|1 < TIMING_ADVANCE_INDEX : bit (4) > < TIMING_ADVANCE_TIMESLOT_NUMBER : bit (3) > } ; < Power Control Parameters IE > ::= < ALPHA : bit (4) > { 0 | 1 < GAMMA_TN0 : bit (5) > } { 0 | 1 < GAMMA_TN1 : bit (5) > } { 0 | 1 < GAMMA_TN2 : bit (5) > } { 0 | 1 < GAMMA_TN3 : bit (5) > } { 0 | 1 < GAMMA_TN4 : bit (5) > } { 0 | 1 < GAMMA_TN5 : bit (5) > } { 0 | 1 < GAMMA_TN6 : bit (5) > } { 0 | 1 < GAMMA_TN7 : bit (5) > } ; SUB PARAMETER DEFINITION Case 1: GPRS mode Field Length (bits) IEI 8 Length 8 MAC_MODE ED EVOLIUM 05 2 RELEASED Coding Set to 00010110 Length (in bytes) of the value part of the 44.018 I.E., i.e.of the information detailed below This information field indicates the medium access method to be LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET ASSIGNMENT 3BK 11203 0138 DSZZA 374/639

0138_05.doc 15/02/2008

used during the TBF. 21 00 Dynamic Allocation 01 Extended Dynamic Allocation 10 Fixed Allocation, not half duplex mode 11 Fixed Allocation, half duplex mode Set to 00. Only dynamic allocation is supported by Alcatel BSS for DTM establishment This field indicates the RLC mode of the requested TBF. 0 RLC acknowledged mode 1 RLC unacknowledged mode This information field indicates the timeslots assigned for use during the TBF or the timeslots carrying a PCCCH. Bit 8 indicates the status of timeslot 0, bit 7 indicates the status of timeslot 1, etc. At least one timeslot must be assigned. 0 Timeslot is not assigned 1 Timeslot is assigned This field describes the timing advance mode and timing advance value assigned to the mobile station. Set to 00. Set to 0. Set to 1. This field contains parameters the mobile station shall use to determine its TX power level. Set to 1. encoded as a binary number. Range 0 to 31 Set to 0. Set to 0. Set to 0. Set to 1.

bit

RLC_MODE TIMESLOT_ALLO CATION

1 8

Packet Advance

Timing

2 1 1 15 or 19 1 5 1 1 1 1

Power control parameters DOWNLINK_TFI_ ASSIGNMENT

Release 6 extensions

Case 2: EGPRS mode Field Length (bits) IEI Length 8 8

Coding

MAC_MODE

RLC_MODE TIMESLOT_ALLO CATION

1 8

Set to 00010110 Length (in bytes) of the value part of the 44.018 I.E., i.e.of the information detailed below This information field indicates the medium access method to be used during the TBF. bit 21 00 Dynamic Allocation 01 Extended Dynamic Allocation 10 Fixed Allocation, not half duplex mode 11 Fixed Allocation, half duplex mode Set to 00. Only dynamic allocation is supported by Alcatel BSS for DTM establishment This field indicates the RLC mode of the requested TBF. 0 RLC acknowledged mode 1 RLC unacknowledged mode This information field indicates the timeslots assigned for use during the TBF or the timeslots carrying a PCCCH. Bit 8 indicates the status of timeslot 0, bit 7 indicates the status of timeslot 1, etc. At least one timeslot must be assigned. 0 Timeslot is not assigned 1 Timeslot is assigned LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET ASSIGNMENT 3BK 11203 0138 DSZZA 375/639

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

Packet Advance P0

Timing

2 1 4

PR_MODE

1 1 1 15 or 19 1 5 1 1 5 2

Power control parameters DOWNLINK_TFI_A SSIGNMENT EGPRS Window Size LINK_QUALITY_M EASUREMENT_M ODE

This field describes the timing advance mode and timing advance value assigned to the mobile station. Set to 00. Set to 1. If P0 is present, then downlink power control is used. Bit 4321 0 0 0 0 P0 = 0 dB 0 0 0 1 P0 = 2 dB 0 0 1 0 P0 = 4 dB : 1 1 1 1 P0 = 30 dB Set to 0000. Set to 0. 0 PR mode A: for one addressed MS 1 PR mode B: for all MS Set to 0. Set to 1. This field contains parameters the mobile station shall use to determine its TX power level. Set to 1. encoded as a binary number. Range 0 to 31 Set to 0. Set to 1. Included only if the TBF is established in EGPRS mode. See note 1. This field determines the measurements to be included within the EGPRS Timeslot Link Quality Measurements IE. bit 21 00 01

The MS shall not report either interference measurements ( values) or per slot BEP measurements. The MS shall report available interference measurements ( values) for timeslots 0 through 7. The value is defined in 3GPP TS 45.008. No per slot mean BEP measurements shall be reported. The MS shall report mean BEP on each allocated time slot. The MS shall report the mean BEP measurement corresponding to the modulation for which it has received a larger number of blocks since the previous report. The MS shall make BEP measurements only on Radio Blocks intended for it. No interference measurements ( values) shall be reported. The MS shall report mean BEP on each allocated time slot. The MS shall report the mean BEP measurement corresponding to the modulation for which it has received a larger number of blocks since the previous report. The MS shall make BEP measurements only on Radio Blocks intended for it. In addition to mean BEP, the MS shall report interference measurements ( values) for no more than four time slots. The MS shall first report available interference measurements for time slots 0, 1, 2, and 3; the MS shall next report available interference measurements for time slots 4, 5, 6, and 7; and the MS

10

11

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET ASSIGNMENT 3BK 11203 0138 DSZZA 376/639

shall alternate between these two groups for subsequent reports. If any of the interference measurements are unavailable for reporting for reasons specified in 3GPP TS 45.008, the MS shall substitute least-recentlyreported and available interference measurements for time slots not already included in the report. Release 6 extensions Note 1: bit 54321 00000 00001 00010 00011 00100 00101 00110 00111 01000 01001 01010 01011 01100 01101 01110 01111 10000 10001 10010 10011 10100 10101 10110 10111 11000 11001 11010 11011 11100 11101 11110 11111 1 1 Set to 0. Set to 1.

Value of EGPRS window size 64 96 128 160 192 224 256 288 320 352 384 416 448 480 512 544 576 608 640 672 704 736 768 800 832 864 896 928 960 992 1024 Reserved

Comment

(maximum window size for a 1 timeslot TBF) (maximum window size for a 2 timeslot TBF)

(maximum window size for a 3 timeslot TBF)

(maximum window size for a 4 timeslot TBF)

(maximum window size for a 5 timeslot TBF)

(maximum window size for a 6 timeslot TBF)

(maximum window size for a 7 timeslot TBF)

(maximum window size for an 8 timeslot TBF)

PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET ASSIGNMENT 3BK 11203 0138 DSZZA 377/639

6.43 PACKET NOTIFICATION


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION RADIO SDCCH/FACCH 44.018

PACKET NOTIFICATION ABIS BTS Transparent A

This message is sent on the main DCCH by the network to trigger the mobile station to perform a cell update procedure. From: BSC To: MS INFORMATION ELEMENT NAME TYPE COMMENT LENGTH (byte) 2 5 3-11 18 TIMER

INFORMATION ELEMENT LIST

Header Packet TMSI C TV Mobile identity C TLV IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION ABNORMAL SITUATION

FOLLOWING EVENT

SPECIF DOC. REF.

See ref [45]

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET NOTIFICATION 3BK 11203 0138 DSZZA 378/639

6.43.1 GENERAL DESCRIPTION 8 0 Packet TMSI Mobile 0 0 7 0 0 1 6 0 0 0 5 0 1 0 4 0 0 1 3 1 0 1 2 1 0 1 1 0 0 0

P-TMSI value 1 IMSI value 0

Identity

6.43.2 P-TMSI TYPE: C Included only when a valid P-TMSI is available in the BSS. If this IE is included the Mobile identity IE shall not be included. DEFINITION Packet Temporary Mobile Subscriber Identity. BIT DESCRIPTION 8 0 7 0 6 0 5 1 4 0 3 0 2 0 1

(P)TMSI octet 1 (P)TMSI octet 2 (P)TMSI octet 3 (P)TMSI octet 4

1 2 3 4

SUBPARAMETER DEFINITION Transparent for the BSS. PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET NOTIFICATION 3BK 11203 0138 DSZZA 379/639

6.43.3 MOBILE IDENTITY TYPE: C Included only when no P-TMSI is available for the concerned MS. DEFINITION To provide the IMSI. TMSI, IMEI and IMEISV are not used in PACKET NOTIFICATION. Note IMSI 15 digits TMSI = 4 octets IMEI = 15 digits IMEISV = 16 digits BIT DESCRIPTION 8 0 7 0 6 0 5 1 4 0 3 0 2 0 1 1

ID digit 1 ID digit 3 :

Length of Mobile Identity contents OEI

ID digit 2 :

Type of ID

ID digit p+1 SUB PARAMETER DEFINITION Type of ID: 001 010 011 100 000 IMSI IMEI IMEISV TMSI No identity other values reserved

ID digit P

Not used Not used Not used Not used

OEI: Odd Even Indicator value 0: 1:

even number of identity digits (even for TMSI) odd number of digits

Filled digit :1 1 1 1

Octet 3 For the IMSI and the IMEI this field is coded using BCD coding. If the number of identify digits is even then bits 5 to 8 of the last octet shall be filled with an end mark coded as '1111'. If the mobile identity is the TMSI then bits 5 to 8 of octet 2 is coded as '1111' and bit 8 of octet 3 is the most significant bit, and bit 1 of the last octet is the least significant bit. PARAMETER ORIGIN - ACTION ON PARAMETER

BSC transparent.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET NOTIFICATION 3BK 11203 0138 DSZZA 380/639

6.44 PAGING REQUEST TYPE 1


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO CCCH (PCH) 44.018

PAGING REQUEST TYPE 1 ABIS A

This message is sent on the PCH by the network to up to two mobile stations to trigger channel access. The mobile stations are identified by their (P)TMSI or IMSI. From: BTS INFORMATION ELEMENT NAME To: MS TYPE MV MV MV MV M LV O TLV MV COMMENT LENGTH (byte) 1 2 2-9 3-10 0-17 23 TIMER

DIRECTION

INFORMATION ELEMENT LIST

L2 Pseudo Length Header Page Mode Channel Needed for Mobiles 1 & 2 Mobile Identity 1 Mobile Identity 2 P1 Rest Octets

Note 1

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. (1) MS accesses the CCCH ABNORMAL SITUATION No response to paging

Paging and Access Grant Control (ref. [1])

The channel needed is set to 'Any Channel'

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PAGING REQUEST TYPE 1 3BK 11203 0138 DSZZA 381/639

6.44.1 GENERAL DESCRIPTION 8 L2 Pseudo Length 0 0 Channel needed/ Page Mode Mobile 0 7 0 0 0 6 0 1 0 5 0 0 0 4 0 0 0 OEI 3 1 0 0 2 0 1 0 PM TYPE OF ID 1 1 0 1 L2 Pseudo Length Value

Identity

ID digit 3

ID digit 1

Length

ID digit P1 0 Mobile 0 0

................... 1 0

ID digit 2

ID digit P 1 1 TYPE OF ID 1 Optional

Identity

ID digit 3

ID digit 1

Length

OEI

ID digit P1 P1 Rest Octets

...................

ID digit 2

ID digit P

See 6.44.5

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PAGING REQUEST TYPE 1 3BK 11203 0138 DSZZA 382/639

6.44.2 PAGE MODE TYPE: M DEFINITION To control the action of the Mobile Station belonging to the paging subgroup corresponding to the paging subchannel. BIT DESCRIPTION 8 7 6 5 4 0 3 0 2 PM 1

Bits 3 and 4 are spare bits. SUB PARAMETER DEFINITION Page Mode 00 01 10 11 Normal paging Extended paging Paging - Reorganisation Same as before Not used Not used Only supported in Immediate Assignment

PARAMETER ORIGIN - ACTION ON PARAMETER The value 'same as before' has been defined instead of 'reserved' to allow the use of this coding with another meaning in an upward compatible way for later releases of GSM.

6.44.3 CHANNELS NEEDED FOR MOBILES 1 & 2 TYPE: M DEFINITION To indicate what channel is required for the transaction linked to the paging procedure. BIT DESCRIPTION 8 7 6 5 4 3 2 1

Channel 2

Channel 1

SUB PARAMETER DEFINITION Channel 1 00 01 10 11 Any Channel SDCCH TCH/F TCH/H or TCH/F Supported Not supported Not supported Not supported

The field Channel 2 uses the same coding. PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PAGING REQUEST TYPE 1 3BK 11203 0138 DSZZA 383/639

6.44.4 MOBILE IDENTITY TYPE: M Mobile Identity 1 O Mobile Identity 2 DEFINITION To provide either the IMSI, the (P)TMSI, but not the IMEI or IMEISV Note IMSI 15 digits (P)TMSI = 4 octets BIT DESCRIPTION 8 0 7 0 6 0 5 1 4 0 3 1 2 1 TYPE OF ID 1 1

ID digit 1 ID digit 3 ID digit P1

Length

OEI

...................

ID digit 2

ID digit P

*: When the element is mandatory, the IEI is not included. SUB PARAMETER DEFINITION Type of ID: 001 IMSI 010 IMEI 011 IMEISV 100 (P)TMSI 000 No identity Other values reserved not used not used

In case of VGCS ,the type of Identity is set to '000' when a fill paging message without any valid identity has to be sent on the paging subchannel (MS1). OEI: Odd Even Indicator value 0: even number of identity digits (even for TMSI) 1: odd number of digits Filled digit 1 1 1 1 The digit are numerical (0 through 9) (Digit 1 is the most significant)

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PAGING REQUEST TYPE 1 3BK 11203 0138 DSZZA 384/639

e.g. IMSI = 186543 0 0 0 0 1 0 0 1 1 1 0 0 1 0 1 1 Length 0 0 1 0 0 1 0 0 1 0 1 0 0 0 1 1 1 0 1 1

1 0 0 1

PARAMETER ORIGIN - ACTION ON PARAMETER BTS provides this parameter (or these parameters) according to those given by MSC through the BSC. The use of a second Mobile Identity parameter is optional and is given to the choice of the BTS.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PAGING REQUEST TYPE 1 3BK 11203 0138 DSZZA 385/639

6.44.5 P1 REST OCTETS TYPE: M DEFINITION The P1 rest octet information element contains : the Packet Page Indication which indicates the paging procedure associated with the mobile station identity (if the identity is not IMSI the Packet Page Indication has no meaning and is ignored by the mobile station). status of information on an existing NCH, priority level and Group Call Reference in case of VGCS . CSN.1 DESCRIPTION { <P1 Rest Octets> ::= {L I H <NLN(PCH) : bit (2)> <NLN status(PCH) : bit>} {L I H <Priority1 ::= Priority>} {L I H <Priority2 ::= Priority>} {L | H <Group Call information>} < Packet Page Indication 1 : {L | H} > < Packet Page Indication 2 : {L | H} > { null | L |H -- Additions in Release 6 : { 0 | 1 < Reduced_GCR : bit (28) >} { 0 | 1 < VSTK_RAND : bit (36) >} { 0 | 1 < CELL_GLOBAL_COUNT: bit (2) >} } <spare padding>;

BIT DESCRIPTION case not related to VGCS 8 7 6 5 4 3 2 1

0 spare 0 spare : : 0 spare

0 spare 0 spare 0 spare

1 spare 1 spare 1 spare

0 spare 0 spare 0 spare

PPI1 1 spare 1 spare

PPI2 0 spare 0 spare

1 spare 1 spare 1 spare

1 spare 1 spare : : 1 spare

PPI1 : The Packet Page Indication 1 relates to the Mobile Station Identity 1. PPI2 : The Packet Page Indication 2 relates to the Mobile Station Identity 2. L H paging procedure for RR connection establishment; packet paging procedure

PARAMETER ORIGIN - ACTION ON PARAMETER BIT DESCRIPTION case related to VGCS

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PAGING REQUEST TYPE 1 3BK 11203 0138 DSZZA 386/639

Example 1: Only one MS is paged (with IMSI: 15 digits): there are only 10 bytes available for P1 Rest Octet. A higher priority voice group call to be notified in the cell. The voice group call channel is allocated in the cell (Non Hopping case) Information elements Length (bit) 1 NLN(NCH) NLN status 2 1 1 3 1 3 1 Group Call Reference 36 1 Channel Description 24 1 Packet Page Indication 1 Packet Page Indication 2 Spare padding 1 1 3 H <NLN(PCH): bit (2)> NLN status(PCH) H Priority1 H Priority2 H <Group Call information> <Group Call Reference: bit(36)>: for VGCS Call 1 1 <Group Channel Description>, for VGCS Call 1 <Channel Description : bit(24)>, for VGCS Call 1 0 L L Non hopping case, for VGCS Call 1 Coding rules

Example 2: Only one MS is paged (with IMSI: 15 digits): A higher priority voice group call to be notified in the cell. The voice group call channel is allocated in the cell (Hopping case). There are only 10 bytes available for P1 Rest Octet. It is not enough for Group Call information. As a consequence, the coding shall be the following: Information elements NLN(PCH) NLN status(PCH) Length (bit) 1 2 1 1 3 1 3 1 1 1 Coding rules H < NLN(PCH): bit (2)> NLN status(PCH) H Priority1 H Priority2 L L L LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PAGING REQUEST TYPE 1 3BK 11203 0138 DSZZA 387/639

<Group Call information> Packet Page Indication 1 Packet Page Indication 2 ED EVOLIUM 05 RELEASED

0138_05.doc 15/02/2008

Information elements Spare padding

Length (bit) 65

Coding rules

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PAGING REQUEST TYPE 1 3BK 11203 0138 DSZZA 388/639

Example 3: There is NO mobile station to be paged. A higher priority voice group call to be notified in the cell. The voice group call channel is allocated in the cell (Hopping case). Number of radio frequencies equal to 12; There are only 17 bytes available for P1 Rest Octet (since Type of ID is 000, only needs two bytes, see 6.44.4 ). The coding shall be the following: Information elements NLN(PCH) NLN status(PCH) Length (bit) 1 2 1 1 3 1 3 1 36 1 24 1 1 24 1 1 44 Coding rules H < NLN(PCH): bit (2)> NLN status(PCH) H Priority1 H Priority2 H <Group Call information> <Group Call Reference: bit(36)>: for VGCS Call 1 1 <Group Channel Description>, for VGCS Call 1 <Channel Description : bit(24)>, for VGCS Call 1 1 hopping case, for VGCS Call 1 0 Mobile Allocation Mobile allocation L L

Group Call Reference Channel Description

Packet Page Indication 1 Packet Page Indication 2 Spare padding

PARAMETER DESCRIPTION NLN(PCH) : Notification List Number The presence of the NLN(PCH) field indicates that if an NCH is present, reduced NCH monitoring can be used, and gives the NLN(PCH) value. Priority: Priority 1 relates to Mobile Station Identity 0 0 0 0 1 1 1 1 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 no priority applied call priority level 4 call priority level 3 call priority level 2 call priority level 1 call priority level 0 call priority level B call priority level A

Group Call information See 6.39.3 LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PAGING REQUEST TYPE 1 3BK 11203 0138 DSZZA 389/639

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

The Packet Page Indication i field relates to Mobile Station Identity i (i = 1, 2) and indicates the kind of paging procedure associated with the mobile station identity. If the identity is not IMSI the Packet Page Indication has no meaning and is ignored. L paging procedure for RR connection establishment; H packet paging procedure.

PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PAGING REQUEST TYPE 1 3BK 11203 0138 DSZZA 390/639

6.45 PAGING REQUEST TYPE 2


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO CCCH (PCH) 44.018

PAGING REQUEST TYPE 2 ABIS A

This message is sent on the PCH by the network to up to three mobile stations to trigger channel access by these. The mobile stations are identified by their (P)TMSI or IMSI. From: BTS INFORMATION ELEMENT NAME To: MS TYPE MV MV MV MV MV O TLV MV (2) (1) COMMENT LENGTH (byte) 1 2 4 4 3-10 1-11 23 TIMER

DIRECTION

INFORMATION ELEMENT LIST

L2 Pseudo Length Header Page Mode Channels Needed for mobiles 1 & 2 Mobile Identity 1 Mobile Identity 2 Mobile Identity 3 P2 Rest Octets

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT MS accesses the CCCH ABNORMAL SITUATION No response to paging

SPECIF DOC. REF. (1) (2)

Paging and Access Grant Control (ref. [1])

Always present. The channel needed is set to 'Any Channel'

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PAGING REQUEST TYPE 2 3BK 11203 0138 DSZZA 391/639

6.45.1 GENERAL DESCRIPTION 8 L2 Pseudo Length 0 0 Channels needed for mobiles 1 & 2/ Page Mode TMSI MS 1 0 7 0 0 0 6 0 1 0 5 0 0 0 4 0 0 0 3 1 0 0 2 0 1 1 PM 1 1 0 0

L2 Pseudo Length Value

(P)TMSI octet 1 (P)TMSI octet 2 (P)TMSI octet 3 (P)TMSI octet 4 (P)TMSI octet 1 (P)TMSI octet 2 (P)TMSI octet 3 (P)TMSI octet 4 0 0 0 1 Length 0 1 1 TYPE OF ID 1

TMSI MS 2

Mobile MS 3

Identity

ID digit 1

ID digit 3

OEI

ID digit P+1 P2 RestOctets

...................

ID digit 2

ID digit P

See 6.45.6

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PAGING REQUEST TYPE 2 3BK 11203 0138 DSZZA 392/639

6.45.2 PAGE MODE TYPE: M DEFINITION To control the action of the Mobile Station belonging to the paging subgroup corresponding to the paging subchannel. BIT DESCRIPTION 8 7 6 5 4 3 2 1

PM

Bits 3 and 4 are spare bits. SUB PARAMETER DEFINITION Page Mode 00 01 10 11 Normal paging Extended paging Paging - Reorganisation Same as before Not used Not used Only used in Immediate Assignment

PARAMETER ORIGIN - ACTION ON PARAMETER The value 'same as before' has been defined instead of 'reserved' to allow the use of this coding with another meaning in an upward compatible way for later releases of GSM. 6.45.3 CHANNELS NEEDED FOR MOBILES 1 & 2 TYPE: M DEFINITION To indicate what channel is required for the transaction linked to the paging procedure. Channel 2 8 7 Channel 1 6 5 4 3 2 1

SUB PARAMETER DEFINITION Channel 1 00 01 10 11 Any Channel SDCCH TCH/F TCH/H or TCH/F Not supported Not supported Not supported

The field Channel 2 uses the same coding. PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PAGING REQUEST TYPE 2 3BK 11203 0138 DSZZA 393/639

6.45.4 (P)TMSI TYPE: M DEFINITION (Packet) Temporary Mobile Subscriber Identity. BIT DESCRIPTION 8 7 6 5 4 3 2 1

(P)TMSI octet 1 (P)TMSI octet 2 (P)TMSI octet 3 (P)TMSI octet 4

1 2 3 4

SUBPARAMETER DEFINITION Transparent for the BSS. PARAMETER ORIGIN - ACTION ON PARAMETER

6.45.5 MOBILE IDENTITY TYPE: O DEFINITION To provide either the IMSI, the (P)TMSI, but not the IMEI or IMEISV. Note IMSI 15 digits (P)TMSI = 4 octets BIT DESCRIPTION 8 0 7 0 6 0 5 1 4 0 3 1 2 1 TYPE OF ID 1 1

ID digit 1 ID digit 3 ID digit P+1

Length

OEI

...................

ID digit 2

ID digit P

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PAGING REQUEST TYPE 2 3BK 11203 0138 DSZZA 394/639

SUB PARAMETER DEFINITION Type of ID 001 010 011 100 000 IMSI IMEI IMEISV (P)TMSI No identity Other values reserved not used not used not used

OEI: Odd Even Indicator value 0: even number of identity digits (even for TMSI) 1: odd number of digits Filled digit 1 1 1 1 The digit are numerical (0 through 9) (Digit 1 is the most significant) e.g. IMSI = 186543 0 0 0 0 1 0 0 1 1 1 0 0 1 0 1 0 1 0 0 1 Length 1 0 1 0 0 0 0 0 1 0 0 0 0 0 1 0 1 0 1 1 1 3 4 5 6 2

Octet 3 For the IMSI, this field is coded using BCD coding (number 0 through 9). If the number of identify digits is even then bits 5 to 8 of the last octet shall be filled with an end mark coded as '1111'. If the mobile identity is the TMSI then bits 5 to 8 of octet 3 is coded as '1111' and bit 8 of octet 4 is the most significant bit, and bit 1 of the last octet is the least significant bit. PARAMETER ORIGIN - ACTION ON PARAMETER BTS provides this parameter (or these parameters) according to those given by MSC through the BSC.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PAGING REQUEST TYPE 2 3BK 11203 0138 DSZZA 395/639

6.45.6 P2 REST OCTETS TYPE: M DEFINITION This element contains information on the channel needed by the network. CSN.1 DESCRIPTION { <P2 Rest Octets> ::= {L I H <CN3: bit (2)>} {L I H <NLN (PCH) : bit (2)> <NLN status (PCH) : bit>} {L I H <Priority1 ::= Priority>} {L I H <Priority2 ::= Priority>} {L I H <Priority3 ::= Priority>} < Packet Page Indication 3 : {L | H} > <spare padding>;

} <Priority> ::= <bit(3)>;

BIT DESCRIPTION Case not related to VGCS CNI 0 spare 0 spare 8 CN3 0 spare : 0 spare 7 CN3 1 spare 1 spare 6 0 spare 0 spare 0 spare 5 1 spare 1 spare 1 spare 4 PPI3 0 spare 0 spare 3 1 spare 1 spare : 1 spare 2 1 spare 1 spare 1 spare 1 1 2 11

SUBPARAMETER DEFINITION H L CN3 Channel needed for Mobile Identity 3 1 0 00 01 10 11 An indication of channel required is given. No indication is given. Default value for CN3=00 Any Channel SDCCH TCH/F TCH/F or TCH/H Not supported Supported Not supported

Not supported Not supported

Note:

Always set to 01 for this release.

PPI3 : Packet Page Indication which indicates the paging procedure associated to the Mobile Station Identity 3 : L paging procedure for RR connection establishment; H packet paging procedure PARAMETER ORIGIN - ACTION ON PARAMETER As CNI is set to 1 the mobile should ignore the value of CN3 which is set to 01 for this release for phase 1 compatibility reasons. ED EVOLIUM 05 RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PAGING REQUEST TYPE 2 3BK 11203 0138 DSZZA 396/639

BIT DESCRIPTION Case related to VGCS 8 7 6 5 4 3 2 1

L=0

H=1 PPI3 H=1 :

NLN

1 spare 1 spare

Priority2 0 spare 0 spare

NLN status 1 spare 1 spare

H=1 0 spare 0 spare H=1

Priority1

1 2 3

0 spare

0 spare

1 spare : 1 spare

Priority3

1 spare 1 spare

11

SUBPARAMETER DEFINITION NLN(PCH) : Notification List Number The presence of the NLN(PCH) field indicates that if an NCH is present, reduced NCH monitoring can be used, and gives the NLN(PCH) value. Priority: 0 0 0 0 0 1 0 1 1 0 1 0 1 1 1 1 Priority i relates to Mobile Station Identity i (i = 1, 2, 3) 0 no priority applied 1 call priority level 4 0 call priority level 3 1 call priority level 2 0 call priority level 1 1 call priority level 0 0 call priority level B 1 call priority level A

The Packet Page Indication 3 field relates to Mobile Station Identity 3 and indicates the kind of paging procedure associated with the mobile station identity. If the identity is not IMSI the Packet Page Indication has no meaning and is ignored. L paging procedure for RR connection establishment; H packet paging procedure.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PAGING REQUEST TYPE 2 3BK 11203 0138 DSZZA 397/639

6.46 PAGING REQUEST TYPE 3


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO CCCH (PCH) 44.018

PAGING REQUEST TYPE 3 ABIS A

This message is sent on the PCH by the network to up to four mobile stations to trigger channel access by these. The mobile stations are identified by their TMSI. From: BTS INFORMATION ELEMENT NAME To: MS TYPE M V M M M M M M M V V V V V V V (1) COMMENT LENGTH (byte) 1 2 4 4 4 4 3 23 TIMER

DIRECTION

INFORMATION ELEMENT LIST

L2 Pseudo Length Header Page Mode Channels needed for MS 1 & 2 Mobile Identity 1 Mobile Identity 2 Mobile Identity 3 Mobile Identity 4 P3 Rest Octets

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT MS accesses the CCCH ABNORMAL SITUATION No response to paging

SPECIF DOC. REF. (1)

Paging and Access Grant Control (ref. [1])

The channel needed is set to 'Any Channel'

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PAGING REQUEST TYPE 3 3BK 11203 0138 DSZZA 398/639

6.46.1 GENERAL DESCRIPTION L2 Pseudo Length 8 0 0 0 7 0 0 L2 Pseudo Length Value 0 1 0 0 6 5 4 0 0 0 3 1 1 0 0 2 1 0 PM 1 1 0 0

Channels needed/ Page Mode TMSI

(P)TMSI octet 1 (P)TMSI octet 3 (P)TMSI octet 2 (P)TMSI octet 4 (P)TMSI octet 1 (P)TMSI octet 3 (P)TMSI octet 2

Mobile 1

TMSI

Mobile 2

(P)TMSI octet 4 (P)TMSI octet 1 (P)TMSI octet 2 (P)TMSI octet 4 (P)TMSI octet 1 (P)TMSI octet 2 (P)TMSI octet 4 0 1 0 spare 0 spare 1 spare 1 spare

TMSI

Mobile 3

(P)TMSI octet 3

TMSI

Mobile 4 0 P3 Rest Octets 0 spare 0 spare 0 0 spare 0 spare 1 1 spare 1 spare

(P)TMSI octet 3

0 spare 0 spare 0 spare

1 spare 1 spare 1 spare

1 spare 1 spare 1 spare

6.46.2 PAGE MODE TYPE: M DEFINITION To control the action of the Mobile Station belonging to the paging subgroup corresponding to the paging subchannel. BIT DESCRIPTION 8 7 6 5 4 0 3 0 2 PM 1

Bits 3 and 4 are spare bits.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PAGING REQUEST TYPE 3 3BK 11203 0138 DSZZA 399/639

SUB PARAMETER DEFINITION Page Mode 00 01 10 11 Normal paging Extended paging Paging - Reorganisation Same as before Not used Not used Only supported in Immediate Assignment

PARAMETER ORIGIN - ACTION ON PARAMETER

The value 'same as before' has been defined instead of 'reserved' to allow the use of this coding with another meaning in an upward compatible way for later releases of GSM. 6.46.3 CHANNELS NEEDED FOR MOBILES 1 & 2 TYPE: M DEFINITION To indicate what channel is required for the transaction linked to the paging procedure. BIT DESCRIPTION Channel 2 8 7 Channel 1 6 5 4 3 2 1

SUB PARAMETER DEFINITION Channel 1 00 01 10 11 Any Channel SDCCH TCH/F TCH/F or TCH/H Not supported Not supported Not supported

The field Channel 2 uses the same coding.

PARAMETER ORIGIN - ACTION ON PARAMETER 6.46.4 (P)TMSI TYPE: M DEFINITION (Packet) Temporary Mobile Subscriber Identity. BIT DESCRIPTION 8 7 6 (P)TMSI octet 1 (P)TMSI octet 2 (P)TMSI octet 3 (P)TMSI octet 4 SUBPARAMETER DEFINITION Transparent for the BSS. PARAMETER ORIGIN - ACTION ON PARAMETER 5 4 3 2 1 1 2 3 4

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PAGING REQUEST TYPE 3 3BK 11203 0138 DSZZA 400/639

6.46.5 P3 REST OCTETS TYPE: M DEFINITION This element contains information of the channel needed by the network. CSN.1 DESCRIPTION <P3 Rest Octets> ::= {L I H <CN3 : bit (2)> <CN4 : bit (2)>} {L I H <NLN (PCH) : bit (2)> <NLN status (PCH) : bit>} {L I H <Priority1 ::= Priority>} {L I H <Priority2 ::= Priority>} {L I H <Priority3 ::= Priority>} {L I H <Priority4 ::= Priority>} <spare padding>; <Priority> ::= <bit(3)>; BIT DESCRIPTION case not related to VGCS L|H 0 spare 0 spare 8 CN3 0 spare 0 spare 7 CN3 1 spare 1 spare 6 CN4 0 spare 0 spare 5 CN4 1 spare 1 spare 4 0 spare 0 spare 0 spare 3 1 spare 1 spare 1 spare 2 1 spare 1 spare 1 spare 1 1 2 3

SUBPARAMETER DEFINITION L|H 1 0 CN3 00 01 10 11 CN4 00 01 10 11 Note: An indication of channel required is given. No indication is given. Default value for CN3=00 Channel needed for Mobile Identity 3 Any Channel SDCCH TCH/F TCH/H or TCH/F Channel needed for Mobile Identity 4 Any Channel SDCCH TCH/F TCH/H or TCH/F CN3 and CN4 are always set to 01 in this release. Not supported Supported not supported not supported not supported not supported not supported not supported

PARAMETER ORIGIN - ACTION ON PARAMETER As CNI is set to 1 the mobile should ignore the value of CN3 and CN4 which are set to 01 for this release for phase 1 compatibility reasons.

BIT DESCRIPTION case related to VGCS ED EVOLIUM 05 RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PAGING REQUEST TYPE 3 3BK 11203 0138 DSZZA 401/639

L|H H=1

H=1 H=1

NLN

Priority4

Priority2

NLN status 1 spare

H=1 0 spare H=1

Priority1

1 2 3

1 spare

Priority3

1 spare

SUBPARAMETER DEFINITION L|H 1 0 An indication of channel required is given. No indication is given. Default value for CN3=00 Not supported Supported

PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PAGING REQUEST TYPE 3 3BK 11203 0138 DSZZA 402/639

6.47 PAGING RESPONSE


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO SDCCH/FACCH 44.018

PAGING RESPONSE ABIS BTS Transparent NA A

This message is sent on the main DCCH by the MS to the network in connection with establishment of the main signalling link as a response to the paging request message. The BSC is only non transparent to the classmark information. From: MS INFORMATION ELEMENT NAME To: MSC TYPE COMMENT LENGTH (byte) 2 4 2-9 9-16 TIMER

DIRECTION

IE LIST

Header Ciphering Key Sequence number Spare Mobile Station classmark2 Mobile Identity

MV M LV M LV

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT Including as L3 info in "Establish Indication" to the BSC. Paging and Access Grant Control (ref. [1]) ABNORMAL SITUATION

SPECIF DOC. REF.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PAGING RESPONSE 3BK 11203 0138 DSZZA 403/639

6.47.1 GENERAL DESCRIPTION Phase 1 MS 8 0 0 spare/ Ciphering Key Classmark Information Type 2 Mobile 0 0 7 0 0 0 Revision level 0 6 0 1 0 5 0 0 0 4 0 0 0 3 1 1 2 1 1 key sequence 0 1 1

Identity

..

ID digit 3 ..

ID digit 1

Encryption RF power Algorithm Capability 0 0 SM. Frequency capability cap Length of Mobile Identity contents OEI .. ID digit 2 Type of ID

Length = 2

ID Digit p+1

..

ID Digit p

Phase 2 MS 8 0 0 spare/ Ciphering Key Mobile Station Classmark 2 0 0 spare 0 spare CM3 7 0 0 0 6 0 1 0 5 0 0 0 4 0 0 0 A5/1 SM. cap 3 1 1 2 1 1 key sequence RF power Capability VGCS A5/3 0 1 1

Revision ES-IND level PS SS Screen. Capa. Indicator 0 spare

Length of mobile station classmark 2 0 VBS

FC A5/2

Identity

Mobile

..

ID digit 3 ..

ID digit 1

LCS UCS2 SoLSA CMSP VA CAP Length of Mobile Identity contents OEI ..

ID Digit p+1

..

ID digit 2

Type of ID

ID Digit p

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PAGING RESPONSE 3BK 11203 0138 DSZZA 404/639

6.47.2 CIPHERING KEY SEQUENCE NUMBER TYPE: M DEFINITION Identification of the ciphering key Kc which is stored in the Mobile Station without invoking the authentification procedure. BIT DESCRIPTION 8 7 6 5 4 0 3 key sequence 2 1

Bit 4 is spare bit. SUB PARAMETER DEFINITION Key sequence: value 0 to 6: value 7: Possible values for ciphering key sequence number no key is available (MS to network) Reserved (network to MS).

PARAMETER ORIGIN - ACTION ON PARAMETER BSC is transparent to this parameter.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PAGING RESPONSE 3BK 11203 0138 DSZZA 405/639

6.47.3 MS CLASSMARK 2 - GSM Phase 1 TYPE: M DEFINITION Defines certain attributes of the Mobile Station equipment in use on a particular transaction. BIT DESCRIPTION 8 7 Revision level 0 6 5 Length 4 3 2 1 1

Encryption Algorithm 0 SM. cap

RF power Capability Frequency capability

2 3

Bits 8-5 of octet 4 spare set to 0 SUB PARAMETER DEFINITION Octet 2: Bits Revision level Bits Encryption Algorithm Bits RF Power capability GSM900 876 000 Reserved for phase 1 All other values reserved 54 00 algorithm A5/1 All other values reserved. 321 000 class 1 001 class 2 010 class 3 011 class 4 100 class 5 All other values reserved 000 class 1 001 class 2 All other values reserved 000 class 1 001 class 2 010 class 3 All other values reserved

DCS1800 DCS1900

PARAMETER ORIGIN - ACTION ON PARAMETER This is the MS classmark 2 as sent by a phase 1 MS. The BSC takes this information in order to have the MS power capability for the power control algorithm. Note: The BSC will decode the two octets of this IE as if they were the two first octets of a phase 2 MS classmark 2 IE.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PAGING RESPONSE 3BK 11203 0138 DSZZA 406/639

6.47.4 MS CLASSMARK 2 - GSM Phase 2 TYPE: M DEFINITION Defines certain attributes of the Mobile Station equipment in use on a particular transaction. BIT DESCRIPTION 8 0 spare 0 spare CM3 7 6 5 Length 4 3 2 RF power Capability VGCS A5/3 1 1 3 4

Revision ES level IND PS SS Screen. Capa. Indicator 0 0 0 spare spare spare

A5/1 VBS 0 spare

2 FC A5/2

SM. cap 0 spare

Bit 8 of octet 2 spare set to 0 Bits 8 of octet 3 spare set to 0 SUB PARAMETER DEFINITION Octet 2: Bits Revision level 76 00 01 10

Reserved for phase 1. Used by phase 2 mobiles Used by mobile stations supporting R99 or later versions of the protocol All other values reserved Controlled Early Classmark Sending option not implemented Controlled Early Classmark Sending option implemented algorithm A5/1 available algorithm A5/1 not available.

Bit ES-IND

5 0 1

Bit A5/1 Bits RF Power capability GSM900 and GSM850

4 0 1 321 000 001 010 011 100 000 001 010 000 001 010

DCS1800

DCS1900

class 1 class 2 class 3 class 4 class 5 All other values reserved class 1 class 2 class 3, handled as class 1 All other values reserved class 1 class 2 class 3, handled as class 1

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PAGING RESPONSE 3BK 11203 0138 DSZZA 407/639

All other values reserved Octet 3: Bit PS Capability Bits SS Screening Indicator 7 0 1 65 00 01 10 11 4 0 1 Bit VBS Voice Broadcast Service

PS capability not present PS capability present Values defined in GSM 04.80 Values defined in GSM 04.80 Values defined in GSM 04.80 Values defined in GSM 04.80 MS does not support mobile terminated point to point SMS. MS supports mobile terminated point to point SMS.

Bit SM Capability

3 0 no VBS capability or no notifications wanted 1 VBS capability and notifications wanted Not implemented in the BSS. 2 0 1 1 0 1 0 The MS does not support the extension band G1 in addition to the primary GSM band. The MS does support the extension band G1. Reserved for future use no VGCS capability or no notifications wanted VGCS capability and notifications wanted

Bit VGCS Voice Service

Group

Call

Bit FC Frequency Capability GSM900 DCS1800, DCS1900 Octet 4: Bit CM3 Classmark 3

8 0 1 6 0

No additional MS capability Additional MS capabilities are described in the classmark 3 information element.

Bit LCS VA capability

LCS value added location request notification capability not supported 1 LCS value added location request notification capability supported Not implemented in the BSS. the ME has a preference for the default alphabet (defined in GSM 03.38) over UCS2 1 the ME has no preference between the use of the default alphabet and the use of UCS2. Not implemented in the BSS. The ME does not support SoLSA LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PAGING RESPONSE 3BK 11203 0138 DSZZA 408/639

Bit UCS2 treatment

5 0

Bit SoLSA ED EVOLIUM 05 RELEASED

4 0

0138_05.doc 15/02/2008

1 Bit CMSP: CM Service Prompt 3 0

The ME supports SoLSA

"Network initiated MO CM connection request" not supported. 1 "Network initiated MO CM connection request" supported for at least one CM protocol. Not implemented in the BSS A5/3 not available A5/3 available A5/2 not available A5/2 available

Bit A5/3 algorithm supported Bit A5/2 algorithm supported

2 0 1 1 0 1

PARAMETER ORIGIN - ACTION ON PARAMETER The BSC takes this information in order to have the MS power capability for the power control algorithm, the MS frequency capability and the MS ciphering capability.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PAGING RESPONSE 3BK 11203 0138 DSZZA 409/639

6.47.5 MOBILE IDENTITY TYPE: M DEFINITION To provide either the IMSI, the TMSI or the IMEI. IMEISV is not used in the Paging request message. Note IMSI 15 digits TMSI = 4 octets IMEI = 15 digits IMEISV = 16 digits. BIT DESCRIPTION 1 2 3 N 8 7 Length of Mobile Identity contents OEI 6 5 4 3 2 1

ID digit 1 .. ID digit 3

ID Digit p+1

..

ID Digit p

..

ID digit 2

Type of ID ..

SUB PARAMETER DEFINITION Type of ID 001 010 011 100 000 IMSI IMEI IMEISV TMSI No Identity (not used) Other values reserved.

OEI : Odd Even Indicator value: 0 even number of identity digits (even for TMSI) 1 odd number of digits Filled digit 1 1 1 1 The digit are numerical (0 through 9) (Digit 1 is the most significant) e.g. IMSI = 186543 0 0 0 0 1 0 0 1 1 1 0 0 1 0 1 1 1 0 0 1 Length 0 0 1 0 0

1 0 0 1 0

1 0 0 0 1

1 1 0 1 1

PARAMETER ORIGIN - ACTION ON PARAMETER BSC and BTS are transparent to this parameter.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PAGING RESPONSE 3BK 11203 0138 DSZZA 410/639

6.48 PHYSICAL INFORMATION


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO SDCCH/FACCH 44.018

PHYSICAL INFORMATION ABIS A

This message is sent on the main DCCH by the BTS to the MS to stop the sending of access bursts from the mobile station and to activate the new physical channels. From: BTS INFORMATION ELEMENT NAME To: MS TYPE COMMENT LENGTH (byte) 2 1 3 TIMER T3105

DIRECTION

INFORMATION ELEMENT LIST

Header Timing Advance

MV

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. SABM frame Internal Channel Changes (ref. [6]) External Channel Changes (ref. [7]) ABNORMAL SITUATION

6.48.1 GENERAL DESCRIPTION 8 0 0 Timing Advance 0 7 0 0 0 6 0 1 5 0 0 4 0 1 3 1 1 2 1 0 1 0 1

Timing Advance Value

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PHYSICAL INFORMATION 3BK 11203 0138 DSZZA 411/639

6.48.2 TIMING ADVANCE TYPE: M DEFINITION To provide Timing Advance value BIT DESCRIPTION 8 0 Bits 7, 8 are spare bits. SUB PARAMETER DEFINITION Binary representation of the timing advance in bit period (1 bit period 48/13 s). 0: no timing advance (i.e. the MS transmissions to the BS are 468.75 bit periods behind) 7 0 6 5 4 3 2 1

Timing Advance Value

63: maximum timing advance (The MS transmissions are 405.75 bit periods behind) PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PHYSICAL INFORMATION 3BK 11203 0138 DSZZA 412/639

6.49 SYNCHRONIZATION CHANNEL INFORMATION


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION RADIO SCH 44.018 ABIS

SYNCHRONIZATION CHANNEL INFORMATION A

This message is sent on the SCH, which is one of the broadcast channels. Its purpose is to support the synchronization of a MS to a BSS This message does not follow the basic format. From: BTS To: MS INFORMATION ELEMENT NAME TYPE COMMENT LENGTH 25 bits

INFORMATION ELEMENT LIST

See following page for the bit description IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION ABNORMAL SITUATION

TIMER

FOLLOWING EVENT SPECIF DOC. REF.

6.49.1 GENERAL DESCRIPTION 8 7 6 5 4 3 2 1

BSIC

T1 (low)

T2

T1 (middle)

T1(high)

T3' (high) T3' (low)

BSIC

: The base station identity code of the base station

T1, T2, T3' : The 3 parts of the reduced TDMA frame number (RFN) As defined in 3GPP TS 05.10

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYNCHRONIZATION CHANNEL INFORMATION 3BK 11203 0138 DSZZA 413/639

6.50 SYSTEM INFORMATION TYPE 1


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO BCCH 44.018

SYSTEM INFORMATION TYPE 1 ABIS A

This message is sent on the BCCH by the network to all the Mobile Stations within the cell giving information of control of the RACH and of the cell allocations. From: BTS INFORMATION ELEMENT NAME To: MS TYPE MV MV MV MV Note 1 COMMENT LENGTH (byte) 1 2 16 3 1 23 TIMER

DIRECTION

INFORMATION ELEMENT LIST

L2 Pseudo Length Header Cell Channel description RACH Control parameters SI 1 Rest Octets

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. BSS Init of Telecom part Overload Control (ref. [19]) (ref. [16]) ABNORMAL SITUATION

Note (1) Bit map 0 supported for P-GSM only Variable bit map supported for DCS 1800, DCS1900 only.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 1 3BK 11203 0138 DSZZA 414/639

6.50.1 GENERAL DESCRIPTION P-GSM L2 Pseudo Length 8

Cell Channel Description RACH Control Parameters

7 6 5 4 L2 Pseudo Length Value=21 0 0 0 0 0 0 0 0 1 1 0 0 0 0 CA ARFCN FORMAT-ID 124 CA ARFCN 120 ......................... ........... CA ARFCN 008 007 006 005 004 Max TX-Integer Retrans AC C14 AC C6

3 1 0 123

2 0 1 0 122

1 1 0 1 121

113 003 002 Cell Bar Acces AC C9 AC C1 001 RE AC C8 AC C0

SI 1 Rest Octets <SI1 Rest Octets> ::= {L |H <NCH Position : bit (5)> } < Band indicator > <spare padding> ; < Band indicator > ::= < BAND_INDICATOR : bit == L > -- ARFCN indicates 1800 band | < BAND_INDICATOR : bit == H > ; -- ARFCN indicates 1900 band

AC C15 AC C7

AC AC AC EC C13 C12 C11 C10 AC AC AC AC C5 C4 C3 C2 See CSN.1 description below

NCH position : Presence indicator is set to L when the feature VGCS is disable. Presence indicator is set to H when the feature VGCS is enable.That indicates that the NCH is configured and gives the NCH position. BAND_INDICATOR The band indicator for 1800 and 1900 associates the ARFCN channel numbers to the DCS 1800 or to the DCS 1900 band, respectively. The most recently received band indicator value is valid for the whole PLMN. Always set to L for GSM900. DCS 1800, GSM850 and DCS1900 L2 Pseudo Length 8

Cell Channel Description

FORMAT-ID (continued) Note ORIG-ARFCN (middle part) ORIG- RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN ARFCN 1 2 3 4 5 6 7 (low) RELEASED

7 6 5 4 L2 Pseudo Length Value=21 0 0 0 0 0 0 0 0 1 1 1 0 0 0 FORMAT-ID

3 1 0

2 0 1 0

1 1 0 1 ORIGARFCN high

ED EVOLIUM

05

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 1 3BK 11203 0138 DSZZA 415/639

RACH Control Parameters

SI 1 Rest Octets <SI1 Rest Octets> ::= {L |H <NCH Position : bit (5)> } < Band indicator > <spare padding> ; < Band indicator > ::= < BAND_INDICATOR : bit == L > -- ARFCN indicates 1800 band | < BAND_INDICATOR : bit == H > ; -- ARFCN indicates 1900 band

: : : : RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN 104 105 106 107 108 109 110 111 Max TX-Integer Cell RE Retrans Bar Acces AC AC AC AC AC EC AC AC C15 C14 C13 C12 C11 C10 C9 C8 AC AC AC AC AC AC AC AC C7 C6 C5 C4 C3 C2 C1 C0 See CSN.1 description below.

NCH position : Presence indicator is set to L when the feature VGCS is disable. Presence indicator is set to H when the feature VGCS is enable.That indicates that the NCH is configured and gives the NCH position. BAND_INDICATOR The band indicator for 1800 and 1900 associates the ARFCN channel numbers to the DCS 1800 or to the DCS 1900 band, respectively. The most recently received band indicator value is valid for the whole PLMN. If the PLMN_FREQUENCY_BANDS is set to GSM850 DCS1900, then the BAND_INDICATOR is set to HIGH, else set to .LOW. Note: 0 x x: Range 1024 format; 1 0 0: Range 512 format; 1 0 1: Range 256 format; 1 1 0: Range 128 format; 1 1 1: Variable bit map.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 1 3BK 11203 0138 DSZZA 416/639

6.50.2 CELL CHANNEL DESCRIPTION TYPE: M DEFINITION To provide the absolute radio frequency channel numbers used in a cell (belonging to the same band (P-GSM, GSM850, DCS1800, DCS1900) as the BCCH). BIT DESCRIPTION Bit map 0 (P-GSM) 8 7 6 5 4 3 2 1

0 0 FORMAT-ID

120 008 007 006

124 CA ARFCN CA ARFCN ......................... ........... CA ARFCN 005 004

123

122

121

113 003 002 001

Bits 5 and 6 are spare bits in octet 2. Range 1024 format 8 supported 7 0 spare 6 0 spare 0 FORMID W(1) (low part) 5 4 F0 3 W(1) (high part) 2 1 1 2 3 4 5 6 7 8 9 10 W(11) (high) W(12) (high part) W(13) (high part) 11 12 13

1 0 FORMAT-ID

W(2) (high part) W(2) (low) W(3) (low part) W(4) (low part) W(5) (low part) W(6) (low part) W(7) (low part) W(8) (low) W(10) W(11) (low part) W(12) (low part) W(3) (high part) W(4) (high part) W(5) (high part) W(6) (high part) W(7) (high part) W(8) (high part) W(9)

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 1 3BK 11203 0138 DSZZA 417/639

W(13) (low part) W(14) (low part) W(15) (low part)

W(14) (high part) W(15) (high part) W(16)

14 15 16

SUB PARAMETER DEFINITION FORMAT-ID F0 : Format identifier.

: Frequency indicator 0 ARFCN 0 is not a member of the set 1 ARFCN 0 is a member of the set : Each W(i) encodes a non negative integer in binary. if W(k) is null, W(K+1) to W(16) must be null also.

W(i)

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 1 3BK 11203 0138 DSZZA 418/639

Range

512 format 1 0 FORMAT-ID 8 7

supported 0 spare 6 0 spare 5 4 1 0 FORM-ID 3 0 2 ORIGARFCN high 1 1 2 3 4 5 6 7 W(7) (high) W(8) (high part) W(9) (high part) W(10) W(11) W(12) (low part) W(12) (high) W(13) (high part) W(14) W(15) W(16) (high) W(17) 8 9 10 11 12 13 14 15 16

ORIG-ARFCN (middle part) ORIGARFCN low W(1) (low part) W(2) (low) W(3) (low part) W(4) (low) W(1) (high part) W(2) (high part) W(3) (high part) W(4) (high part) W(5) W(6) W(7) (low part) W(8) (low part) W(9) (low part)

W(13) (low part)

W(16) (low part)

SUB PARAMETER DEFINITION FORMAT-ID : Format identifier.

ORIG-ARFCN : This field encodes the ARFCN of one frequency belonging to the set. This value is also used to decode the rest of the element. W(i) : Each W(i) encodes a non negative integer in binary. if W(k) is null, W(K+1) to W(17) must be null also.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 1 3BK 11203 0138 DSZZA 419/639

Range

256 format 8 7

supported 6 5 4 3 2 1

1 0 FORMAT-ID

0 spare

0 spare

0 FORM-ID

ORIG-ARFCN (middle part) ORIGARFCN low W(1) (loW) W(1) (high part) W(2) W(3) W(4) (low part) W(5) (low part) W(6) (low) W(7) W(8) (low part) W(10) W(12) W(9) (high part)

ORIGARFCN high

1 2 3 4

W(4) (high) W(5) (high part) W(6) (high part) W(8) (high)

5 6 7 8 9 10 11 12 13 14 15 16

W(9) (low) W(11) (low part) W(13) W(14) (low part) W(16) (low part) W(18) (low part) W(20) (low part)

W(11) (high)

W(14) (high part) W(15) W(17) W(19) W(21) W(16) (high) W(18) (high) W(20) (high) 0 spare

SUB PARAMETER DEFINITION FORMAT-ID : Format identifier.

ORIG-ARFCN : This field encodes the ARFCN of one frequency belonging to the set. This value is also used to decode the rest of the element. W(i) : Each W(i) encodes a non negative integer in binary. if W(k) is null, W(K+1) to W(21) must be null also.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 1 3BK 11203 0138 DSZZA 420/639

Range

128 format 8 7

supported 6 5 4 3 2 1

1 0 FORMAT-ID

0 spare

0 spare

1 FORM-ID

ORIG-ARFCN (middle part) ORIGARFCN low W(1) W(2) W(3) (low part) W(4) (low) W(6) (low part) W(8) W(10) W(12) W(14) W(16) W(18) (low) W(21) (low) W(24) W(26) (low) W(27) W(19) W(22) W(25) W(28) W(17) W(20) W(23) W(5) W(7) W(9) W(11) W(13) W(15)

ORIGARFCN high

1 2 3

W(3) (high part) W(4) (high part) W(6) (high part)

4 5 6 7 8 9 10 11

W(18) (high) W(21) (high)

12 13 14 15 16

W(26) (high) 0 spare

SUB PARAMETER DEFINITION FORMAT-ID : Format identifier.

ORIG-ARFCN : This field encodes the ARFCN of one frequency belonging to the set. This value is also used to decode the rest of the element. W(i) : Each W(i) encodes a non negative integer in binary. if W(k) is null, W(K+1) to W(28) must be null also.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 1 3BK 11203 0138 DSZZA 421/639

Variable bit map format 8 7

supported 6 5 4 3 2 1

1 0 FORMAT-ID

1 1 FORMAT-ID (continued)

ORIG-ARFCN (middle part) ORIG- RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFC ARFCN 1 2 3 4 5 6 N (low) 7 : : RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFC 104 105 106 107 108 109 110 N 111 Bits 5 and 6 are spare bits in octet 2. SUB PARAMETER DEFINITION FORMAT-ID : Format identifier Bitmap 0 format is only supported for GSM 900 Variable bit map is only supported for DCS 1800, GSM850 and DCS1900

ORIGARFC N high

CA ARFCN N : Cell Allocation Absolute Radio Frequency Channel Number N CA ARFCN N : "0" not belonging to the cell allocation "1" belonging to the cell allocation ORIG-ARFCN : This field encodes the ARFCN of one frequency belonging to the set. This value is also used as the origin of the bit map to generate all the other frequencies. RRFCN N: Relative radio frequency channel number N - For an RF channel with ARFCN = ORIG-ARFCN + N) mod 1024 belonging to the set, then RRFCN N bit is coded as '1'. - For an RF channel with ARFCN = (ORIG-ARFCN + N) mod 1024 not belonging to the set, then RRFCN N bit is coded as '0'. PARAMETER ORIGIN - ACTION ON PARAMETER CA ARFCN N, ORIG-ARFCN, RRFCN : values stored in BSC and updated according to system reconfigurations.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 1 3BK 11203 0138 DSZZA 422/639

6.50.3 RACH CONTROL PARAMETERS TYPE: M DEFINITION To provide parameters used to control the RACH utilisation. BIT DESCRIPTION 8 Max Retrans 7 6 5 TX-Integer 4 3 Cell Bar Acces AC C09 AC C01 2 RE AC C08 AC C00 1

AC C15 AC C07

AC C14 AC C06

AC C13 AC C05

AC C12 AC C04

AC C11 AC C03

EC C10 AC C02

SUB PARAMETER DEFINITION Max Retrans 00 01 10 11 1 re transmission 2 re transmissions 4 re transmissions 7 re transmissions

TX Integer Bits 6 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 5 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1

Number of time slots to spread transmission 4 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 3 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 3 slots used to spread transmission 4 slots used to spread transmission 5 slots used to spread transmission 6 slots used to spread transmission 7 slots used to spread transmission 8 slots used to spread transmission 9 slots used to spread transmission 10 slots used to spread transmission 11 slots used to spread transmission 12 slots used to spread transmission 14 slots used to spread transmission 16 slots used to spread transmission 20 slots used to spread transmission 25 slots used to spread transmission 32 slots used to spread transmission 50 slots used to spread transmission

Cell Bar Access: Cell barred for access 0: the cell is not barred. 1: the cell is barred. RE Call Re-establishment allowed 0: Re-establishment allowed in the cell 1: Re-establishment not allowed in the cell EC Emergency Call allowed (Octet 3 bit 3) 0: Emergency Call allowed in the cell to all MSs ED EVOLIUM 05 RELEASED LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 1 3BK 11203 0138 DSZZA 423/639

0138_05.doc 15/02/2008

1: Emergency Call not allowed in the cell except for the MSs that belong to one of the classes between 11 to 15 AC CN : Access Control Class N (octet 3 except bit 3) and octet 4. For a mobile station with AC CN, access is not barred if the AC CN bit is coded with "0" ; N = 0,1..9,11..15. PARAMETER ORIGIN - ACTION ON PARAMETER All the parameters are given to BSC during configuration and may be changed with OMC requests or by BSC due to "Overload" or "Reset" actions.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 1 3BK 11203 0138 DSZZA 424/639

6.50.4 SI 1 REST OCTETS TYPE: M DEFINITION This parameter consists of either spare bits or gives the NCH Position depending if the feature VGCS is enable or not only .It is used to allow the introduction of new information on the BCCH in later phases. BIT DESCRIPTION EN_VGCS = False 0 (Low) EN_VGCS = True 1 (High) 8 7 6 NCH Position 5 4 3 Band Indicato r 2 1 Spare 1 8 Band Indicato r 7 1 Spare 6 0 Spare 5 1 Spare 4 0 Spare 3 1 Spare 2 1 Spare 1

SUB PARAMETER DEFINITION Band Indicator : The band indicator for DCS1800 or DCS1900 associates the ARFCN channel numbers to the DCS 1800 band, or to the DCS 1900 band respectively (see 3GPP TS 05.05). The most recently received band indicator value is valid for the whole PLMN. 0 ARFCN indicates 1800 band 1 ARFCN indicates 1900 band (not supported)

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 1 3BK 11203 0138 DSZZA 425/639

NCH Position on the CCCH: The values in the NCH Position field indicates the block number of the CCCH block which is used for the first NCH block and the number of blocks used for the NCH. The following coding applies if 1 or more basic physical channels are used for CCCH, not combined with SDCCHs. Value 00000 00001 00010 00011 00100 00101 00110 00111 01000 01001 01010 01011 01100 01101 01110 01111 10000 10001 10010 10011 10100 10101 10110 10111 11000 11001 11010 11011 No of blocks 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 3 3 3 4 4 4 4 5 5 5 6 6 7 Number of first block 0 1 2 3 4 5 6 0 1 2 3 4 5 0 1 2 3 4 0 1 2 3 0 1 2 0 1 0

PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 1 3BK 11203 0138 DSZZA 426/639

6.51 SYSTEM INFORMATION TYPE 2


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO BCCH 44.018

SYSTEM INFORMATION TYPE 2 ABIS A

This message is sent on the BCCH by the network to stations within the cell giving information of control of the RACH and the BCCH allocation in the neighbour cells. From: BTS INFORMATION ELEMENT NAME To: MS TYPE MV MV MV MV MV COMMENT LENGTH (byte) 1 2 16 1 3 23 TIMER

DIRECTION

INFORMATION ELEMENT LIST

L2 Pseudo Length Header BCCH Frequency List NCC permitted RACH Control parameters

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. BSS Init of Telecom part Overload Control (ref. [19]) (ref. [16]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2 3BK 11203 0138 DSZZA 427/639

6.51.1 GENERAL DESCRIPTION P-GSM 8 7 6 5 4 3 2 1 L2 Pseudo Length L2 Pseudo Length Value=22 0 1 0 0 0 0 0 1 1 0 0 0 0 1 1 0 1 0 Neighbour EXT- BA-IND BA BA BA BA IND 0 ARFCN ARFCN ARFCN ARFCN 0 0 0 124 123 122 121 BA BA BA BA BA BA BA Cell BA ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN 120 119 118 117 116 115 114 113 Description ................ BA BA BA BA BA BA BA BA ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN 008 007 006 005 004 003 002 001 NCC Permitted NCC permitted RACH Max TX-Integer Cell RE Retrans Bar Acces Control AC AC AC AC AC EC AC AC C15 C14 C13 C12 C11 C10 C9 C8 Parameters AC AC AC AC AC AC AC AC C7 C6 C5 C4 C3 C2 C1 C0 E-GSM, DCS 1800, DCS1900, GSM850 and Biband 8 7 6 5 4 L2 Pseudo Length L2 Pseudo Length Value=22 0 0 0 0 0 0 0 0 1 1 1 0 EXT- BA-IND FORMAT-ID IND Neighbour Cell Description 3 1 0 2 0 1 1 1 1 0 0 ORIGARFCN high

NCC Permitted RACH Control Parameters

FORMAT-ID (continued) Note ORIG-ARFCN (middle part) ORIG- RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN ARFCN 1 2 3 4 5 6 7 (low) : : : : RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN 104 105 106 107 108 109 110 111 NCC permitted Max TX-Integer Cell RE Retrans Bar Acces AC AC AC AC AC EC AC AC C15 C14 C13 C12 C11 C10 C9 C8 AC AC AC AC AC AC AC AC C7 C6 C5 C4 C3 C2 C1 C0

Note: 0 x x: Range 1024 format; 1 0 0: Range 512 format; 1 0 1: Range 256 format; 1 1 0: Range 128 format; 1 1 1: Variable bit map. ED EVOLIUM 05 RELEASED LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2 3BK 11203 0138 DSZZA 428/639

0138_05.doc 15/02/2008

6.51.2 BCCH FREQUENCY LIST / NEIGHBOUR CELLS DESCRIPTION TYPE: M DEFINITION To provide the absolute radio frequency channel numbers of the BCCH carriers to be monitored by the MS in the cell. Used for cell selection/reselection. BIT DESCRIPTION Bitmap 0 Format 8 supported for P-GSM. 7 EXTIND 6 BA-IND 5 4 3 2 1 1 2

BA BA BA BA ARFCN ARFCN ARFCN ARFCN 124 123 122 121 BA BA BA BA BA BA BA BA ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN 120 119 118 117 116 115 114 113 ................ BA BA BA BA BA BA BA BA ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN 008 007 006 005 004 003 002 001

0 0 FORMAT-ID

16

SUB PARAMETER DEFINITION FORMAT-ID : Format identifier.

EXT-IND : Extension Indication 0 IE carries the complete BA 1 IE carries a part of the BA BA-IND : BCCH allocation sequence number indication Range 0 to 1.

BA ARFCN N : BCCH Allocation Absolute RF Channel Number N - if ARFCN = N belongs to the BCCH allocation, BA ARFCN N bit is coded with "1" N = 1,2 ... 124 - if not BA ARFCN N bit is coded with "0" ; N=1,2 ...124 (Note: the number of neighbour BCCH frequencies is limited to 32)

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2 3BK 11203 0138 DSZZA 429/639

Range 1024 format 8

supported 7 EXTIND 6 BA-IND 5 4 0 F0 3 W(1) (high part) 2 1 1 3 2

1 0 FORMAT-ID

W(2) (low) W(3) (low part) W(4) (low part) W(5) (low part) W(6) (low part) W(8) (low) W(7) (low part)

W(2) (high part)

W(1) (low part)

FORM-ID

W(3) (high part) W(4) (high part) W(6) (high part) W(5) (high part) W(7) (high part) W(8) (high part) W(9)

4 5 7 6 8 9

10 W(11) (high) W(12) (high part) 11 12 13

W(10) W(12) (low part) W(11) (low part)

W(15) (low part)

W(14) (low part)

W(13) (low part)

W(15) (high part) W(16)

W(14) (high part)

W(13) (high part)

14

15

16

SUB PARAMETER DEFINITION FORMAT-ID : Format identifier.

EXT-IND : Extension Indication 0 IE carries the complete BA 1 IE carries a part of the BA BA-IND F0 : BCCH allocation sequence number indication Range 0 to 1. : Frequency indicator 0 ARFCN 0 is not a member of the set 1 ARFCN 0 is a member of the set : Each W(i) encodes a non negative integer in binary. if W(k) is null, W(K+1) to W(16) must be null also.

W(i)

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2 3BK 11203 0138 DSZZA 430/639

Range 512 format 8

supported 7 EXT- BA-IND 1 0 FORMAT-ID (cont) IND ORIG-ARFCN (middle part) W(1) (high part) W(2) (high part) 6 5 4 3 2 0 ORIGARFCN 1 1 3 5 2 4

1 0 FORMAT-ID ORIGARFCN W(1) (low part) W(3) (low part) W(4) (low) W(2) (low)

W(4) (high part) W(5) W(6)

W(3) (high part)

6 W(7) (high) W(8) (high part)

7 8

W(9) (low part)

W(8) (low part)

W(7) (low part)

W(13) (low part)

W(12) (low part)

W(11)

W(10)

W(9) (high part)

10

W(16) (low part) SUB PARAMETER DEFINITION FORMAT-ID : Format identifier.

W(15)

W(14)

W(13) (high part)

W(12) (high)

11

13

12

W(17)

W(16) (high)

14

16

15

EXT-IND : Extension Indication 0 IE carries the complete BA 1 IE carries a part of the BA BA-IND : BCCH allocation sequence number indication Range 0 to 1. : This field encodes the ARFCN of one frequency belonging to the set. This value is also used as the origin of the bit map to generate all the other frequencies.

ORIG-ARFCN W(i)

: Each W(i) encodes a non negative integer in binary. if W(k) is null, W(K+1) to W(17) must be null also.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2 3BK 11203 0138 DSZZA 431/639

Range 256 format 8

supported 7 EXT- BA-IND 1 0 FORMAT-ID (cont) IND ORIG-ARFCN (middle part) W(1) (high part) W(2) W(3) W(4) (low part) W(7) W(10) W(4) (high) W(5) (high part) W(8) (high) 6 5 4 3 2 1 ORIGARFCN 1 1 3 2 4 5 6 7

1 0 FORMAT-ID ORIGARFCN W(1) (loW)

W(6) (low)

W(5) (low part)

W(6) (high part)

W(9) (low) W(11) (low part) W(14) (low part)

W(8) (low part)

W(9) (high part) W(12) W(15) W(17) W(19) W(21)

W(11) (high)

10 12 11 13 14 15 16

W(13)

W(14) (high part)

W(16) (low part) W(18) (low part) W(20) (low part)

W(16) (high) W(18) (high) W(20) (high) 0 spare

SUB PARAMETER DEFINITION FORMAT-ID : Format identifier.

EXT-IND : Extension Indication 0 IE carries the complete BA 1 IE carries a part of the BA BA-IND : BCCH allocation sequence number indication Range 0 to 1. : This field encodes the ARFCN of one frequency belonging to the set. This value is also used as the origin of the bit map to generate all the other frequencies.

ORIG-ARFCN W(i)

: Each W(i) encodes a non negative integer in binary. if W(k) is null, W(K+1) to W(21) must be null also.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2 3BK 11203 0138 DSZZA 432/639

Range 128 format 8

supported 7 EXT- BA-IND 1 1 FORMAT-ID (cont) IND ORIG-ARFCN (middle part) W(1) W(2) W(5) 6 5 4 3 2 1 ORIGARFCN 1 1 2 3 4

1 0 FORMAT-ID ORIGARFCN

W(4) (low) W(6) (low part) W(8)

W(3) (low part)

W(4) (high part) W(7)

W(3) (high part)

W(6) (high part)

6 7 8

W(9)

W(10) W(12) W(16) W(14) W(19) W(22) W(27) W(17)

W(11) W(13) W(15) W(20) W(18) (high)

10 11 12

W(18) (low) W(21) (low) W(26) (low)

W(24)

W(25)

W(23) W(28)

W(21) (high)

13 15 14 16

W(26) (high)

0 spare

SUB PARAMETER DEFINITION FORMAT-ID : Format identifier.

EXT-IND : Extension Indication 0 IE carries the complete BA 1 IE carries a part of the BA BA-IND : BCCH allocation sequence number indication Range 0 to 1. : This field encodes the ARFCN of one frequency belonging to the set. This value is also used as the origin of the bit map to generate all the other frequencies.

ORIG-ARFCN W(i)

: Each W(i) encodes a non negative integer in binary. if W(k) is null, W(K+1) to W(28) must be null also.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2 3BK 11203 0138 DSZZA 433/639

Variable Bit Map format 1 0 FORMAT-ID 8 7

supported EXTIND 6 BA-IND 5 4 1 3 2 1 1 2

1 1 ORIGFORMAT-ID ARFCN (continued) high ORIG-ARFCN (middle part) ORIG- RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN ARFCN 1 2 3 4 5 6 7 (low) : : RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN 104 105 106 107 108 109 110 111 SUB PARAMETER DEFINITION FORMAT-ID : Format identifier.

16

EXT-IND : Extension Indication 0 IE carries the complete BA 1 IE carries a part of the BA BA-IND : BCCH allocation sequence number indication Range 0 to 1. : This field encodes the ARFCN of one frequency belonging to the set. This value is also used as the origin of the bit map to generate all the other frequencies.

ORIG-ARFCN

RRFCN N: Relative radio frequency channel number N - For an RF channel with ARFCN = ORIG-ARFCN + N) mod 1024 belonging to the set, then RRFCN N bit is coded as '1'. - For an RF channel with ARFCN = (ORIG-ARFCN + N) mod 1024 not belonging to the set, then RRFCN N bit is coded as '0'. (Note: the number of neighbour BCCH frequencies is limited to 32) PARAMETER ORIGIN - ACTION ON PARAMETER All the parameters are given during configuration and updated by OMC requests.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2 3BK 11203 0138 DSZZA 434/639

6.51.3 NCC PERMITTED TYPE: M DEFINITION To provide a definition of the allowed NCCs on the BCCH carriers to be monitored by the MSs in the cell. BIT DESCRIPTION 8 7 6 5 4 3 2 1

NCC permitted

SUB PARAMETER DEFINITION NCC permitted field is coded as a bitmap i.e. bit N is coded with a "0" if the BCCH carrier with NCC = N - 1 is not permitted for monitoring, and with a "1" if the BCCH carrier with NCC = N - 1 is permitted for monitoring. N = 1, 2,..., 8. PARAMETER ORIGIN - ACTION ON PARAMETER This information is determined by O&M.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2 3BK 11203 0138 DSZZA 435/639

6.51.4 RACH CONTROL PARAMETERS TYPE: M DEFINITION To provide parameters used to control the RACH utilisation. BIT DESCRIPTION 8 Max Retrans 7 6 5 TX-Integer 4 3 Cell Bar Acces AC C09 AC C01 2 RE AC C08 AC C00 1

AC C15 AC C07

AC C14 AC C06

AC C13 AC C05

AC C12 AC C04

AC C11 AC C03

EC C10 AC C02

SUB PARAMETER DEFINITION Max Retrans 00 01 10 11 1 re transmission 2 re transmissions 4 re transmissions 7 re transmissions

TX Integer Bits 6 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1

5 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1

Number of time slots to spread transmission 4 3 0 0 3 slots used to spread transmission 0 1 4 slots used to spread transmission 1 0 5 slots used to spread transmission 1 1 6 slots used to spread transmission 0 0 7 slots used to spread transmission 0 1 8 slots used to spread transmission 1 0 9 slots used to spread transmission 1 1 10 slots used to spread transmission 0 0 11 slots used to spread transmission 0 1 12 slots used to spread transmission 1 0 14 slots used to spread transmission 1 1 16 slots used to spread transmission 0 0 20 slots used to spread transmission 0 1 25 slots used to spread transmission 1 0 32 slots used to spread transmission 1 1 50 slots used to spread transmission

Cell Bar Access: Cell barred for access 0: the cell is not barred. 1: the cell is barred. RE Call Re-establishment allowed 0: Re-establishment allowed in the cell 1: Re-establishment not allowed in the cell

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2 3BK 11203 0138 DSZZA 436/639

EC Emergency Call allowed (Octet 3 bit 3) 0: Emergency Call allowed in the cell to all MSs 1: Emergency Call not allowed in the cell except for the MSs that belong to one of the classes between 11 to 15 AC CN : Access Control Class N (octet 3 except bit 3) and octet 4. For a mobile station with AC CN, access is not barred if the AC CN bit is coded with "0" ; N = 0,1..9,11..15. PARAMETER ORIGIN - ACTION ON PARAMETER All the parameters are given to BSC during configuration and may be changed with OMC requests or by BSC due to "Overload" or "Reset" actions.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2 3BK 11203 0138 DSZZA 437/639

6.52 SYSTEM INFORMATION TYPE 2BIS


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO BCCH 44.018

SYSTEM INFORMATION TYPE 2BIS ABIS A

This message is sent on the BCCH by the network to stations within the cell giving information of control of the RACH and of the extension of the BCCH allocation in the neighbour cells. From: BTS INFORMATION ELEMENT NAME To: MS TYPE MV MV MV MV MV COMMENT LENGTH (byte) 1 2 16 3 1 23 TIMER

DIRECTION

INFORMATION ELEMENT LIST

L2 Pseudo Length Header Extended BCCH Frequency List RACH Control parameters SI 2bis Rest Octets

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. BSS Init of Telecom part Overload Control (ref. [19]) (ref. [16]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2bis 3BK 11203 0138 DSZZA 438/639

6.52.1 GENERAL DESCRIPTION E-GSM, DCS 1800, GSM850, DCS1900 and Biband 8 7 6 5 4 3 2 1 L2 Pseudo Length L2 Pseudo Length Value=22 0 1 0 0 0 0 0 1 1 0 0 0 0 0 0 0 1 0 1 0 EXT- BA-IND ORIGFORMAT-ID IND FORMAT-ID ARFCN (continued) Note high Neighbour ORIG-ARFCN (middle part) Cell ORIG- RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN Description ARFCN 1 2 3 4 5 6 7 (low) : : : : RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN 104 105 106 107 108 109 110 111 RACH Max TX-Integer Cell RE Retrans Bar Acces Control AC AC AC AC AC EC AC AC C15 C14 C13 C12 C11 C10 C9 C8 Parameters AC AC AC AC AC AC AC AC C7 C6 C5 C4 C3 C2 C1 C0 SI 2bis Rest Octets 0 0 1 0 1 0 1 1 Note: 0 x x: Range 1024 format; 1 0 0: Range 512 format; 1 0 1: Range 256 format; 1 1 0: Range 128 format; 1 1 1: Variable bit map.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2bis 3BK 11203 0138 DSZZA 439/639

6.52.2 EXTENDED BCCH FREQUENCY LIST / NEIGHBOUR CELLS DESCRIPTION TYPE: M DEFINITION To provide the absolute radio frequency channel numbers of the BCCH carriers to be monitored by the MS in the cell. Used for cell selection/reselection. BIT DESCRIPTION Range 1024 format 8 supported 7 EXTIND 6 BA-IND 5 4 0 F0 3 W(1) (high part) 2 1 1 3 2

1 0 FORMAT-ID

W(2) (low) W(3) (low part) W(4) (low part) W(5) (low part) W(6) (low part) W(8) (low) W(7) (low part)

W(2) (high part)

W(1) (low part)

FORM-ID

W(3) (high part) W(4) (high part) W(5) (high part) W(6) (high part) W(7) (high part) W(8) (high part) W(9)

4 5 6 7 8 9

10 W(11) (high) W(12) (high part) 11 12 13

W(10) W(12) (low part) W(11) (low part)

W(15) (low part)

W(14) (low part)

W(13) (low part)

W(15) (high part) W(16)

W(14) (high part)

W(13) (high part)

14

15

16

SUB PARAMETER DEFINITION FORMAT-ID : Format identifier.

EXT-IND : Extension Indication 0 IE carries the complete BA 1 IE carries a part of the BA BA-IND F0 : BCCH allocation sequence number indication Range 0 to 1. : Frequency indicator 0 ARFCN 0 is not a member of the set 1 ARFCN 0 is a member of the set LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2bis 3BK 11203 0138 DSZZA 440/639

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

W(i)

: Each W(i) encodes a non negative integer in binary. if W(k) is null, W(K+1) to W(16) must be null also. supported 7 1 0 EXT- BA-IND FORMAT-ID (cont) IND ORIG-ARFCN (middle part) W(1) (high part) W(2) (high part) 6 5 4 3 2 0 ORIGARFCN 1 1 3 5 2 4

Range 512 format 8

1 0 FORMAT-ID ORIGARFCN W(1) (low part) W(3) (low part) W(4) (low) W(2) (low)

W(4) (high part) W(5) W(6)

W(3) (high part)

6 W(7) (high) W(8) (high part)

7 8

W(9) (low part)

W(8) (low part)

W(7) (low part)

W(13) (low part)

W(12) (low part)

W(11)

W(10)

W(9) (high part)

10

W(16) (low part) SUB PARAMETER DEFINITION FORMAT-ID : Format identifier.

W(15)

W(14)

W(13) (high part)

W(12) (high)

11

13

12

W(17)

W(16) (high)

14

16

15

EXT-IND : Extension Indication 0 IE carries the complete BA 1 IE carries a part of the BA BA-IND : BCCH allocation sequence number indication Range 0 to 1. : This field encodes the ARFCN of one frequency belonging to the set. This value is also used as the origin of the bit map to generate all the other frequencies.

ORIG-ARFCN W(i)

: Each W(i) encodes a non negative integer in binary. if W(k) is null, W(K+1) to W(17) must be null also.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2bis 3BK 11203 0138 DSZZA 441/639

Range 256 format 8

supported 7 EXT- BA-IND 1 0 FORMAT-ID (cont) IND ORIG-ARFCN (middle part) W(1) (high part) W(2) W(3) W(4) (low part) W(7) W(10) W(4) (high) W(5) (high part) W(8) (high) 6 5 4 3 2 1 ORIGARFCN 1 1 3 2 4 5 6 7

1 0 FORMAT-ID ORIGARFCN W(1) (loW)

W(6) (low)

W(5) (low part)

W(6) (high part)

W(9) (low) W(11) (low part) W(14) (low part)

W(8) (low part)

W(9) (high part) W(12) W(15) W(17) W(19) W(21)

W(11) (high)

10 12 11 13 14 15 16

W(13)

W(14) (high part)

W(16) (low part) W(18) (low part) W(20) (low part)

W(16) (high) W(18) (high) W(20) (high) 0 spare

SUB PARAMETER DEFINITION FORMAT-ID : Format identifier.

EXT-IND : Extension Indication 0 IE carries the complete BA 1 IE carries a part of the BA BA-IND : BCCH allocation sequence number indication Range 0 to 1.

ORIG-ARFCN : This field encodes the ARFCN of one frequency belonging to the set. This value is also used as the origin of the bit map to generate all the other frequencies. W(i) : Each W(i) encodes a non negative integer in binary. if W(k) is null, W(K+1) to W(21) must be null also.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2bis 3BK 11203 0138 DSZZA 442/639

Range 128 format 8

supported 7 EXT- BA-IND 1 1 FORMAT-ID (cont) IND ORIG-ARFCN (middle part) W(1) W(2) W(5) 6 5 4 3 2 1 ORIGARFCN 1 1 2 3 4

1 0 FORMAT-ID ORIGARFCN

W(4) (low) W(6) (low part) W(8)

W(3) (low part)

W(4) (high part) W(7)

W(3) (high part)

W(6) (high part)

6 7 8

W(9)

W(10) W(12) W(16) W(14) W(19) W(22) W(27) W(17)

W(11) W(13) W(15) W(20) W(18) (high)

10 11 12

W(18) (low) W(21) (low) W(26) (low)

W(24)

W(25)

W(23) W(28)

W(21) (high)

13 15 14 16

W(26) (high)

0 spare

SUB PARAMETER DEFINITION FORMAT-ID : Format identifier.

EXT-IND : Extension Indication 0 IE carries the complete BA 1 IE carries a part of the BA BA-IND : BCCH allocation sequence number indication Range 0 to 1. : This field encodes the ARFCN of one frequency belonging to the set. This value is also used as the origin of the bit map to generate all the other frequencies.

ORIG-ARFCN W(i)

: Each W(i) encodes a non negative integer in binary. if W(k) is null, W(K+1) to W(28) must be null also.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2bis 3BK 11203 0138 DSZZA 443/639

Variable Bit Map format 1 0 FORMAT-ID 8 7

supported EXTIND 6 BA-IND 5 4 1 3 2 1 1 2

1 1 ORIGFORMAT-ID ARFCN (continued) high ORIG-ARFCN (middle part) ORIG- RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN ARFCN 1 2 3 4 5 6 7 (low) : : RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN 104 105 106 107 108 109 110 111 SUB PARAMETER DEFINITION FORMAT-ID : Format identifier.

16

EXT-IND : Extension Indication 0 IE carries the complete BA 1 IE carries a part of the BA BA-IND : BCCH allocation sequence number indication Range 0 to 1. : This field encodes the ARFCN of one frequency belonging to the set. This value is also used as the origin of the bit map to generate all the other frequencies.

ORIG-ARFCN

RRFCN N: Relative radio frequency channel number N - For an RF channel with ARFCN = ORIG-ARFCN + N) mod 1024 belonging to the set, then RRFCN N bit is coded as '1'. - For an RF channel with ARFCN = (ORIG-ARFCN + N) mod 1024 not belonging to the set, then RRFCN N bit is coded as '0'. (Note: the number of neighbour BCCH frequencies is limited to 32) PARAMETER ORIGIN - ACTION ON PARAMETER All the parameters are given during configuration and updated by OMC requests.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2bis 3BK 11203 0138 DSZZA 444/639

6.52.3 RACH CONTROL PARAMETERS TYPE: M DEFINITION To provide parameters used to control the RACH utilisation. BIT DESCRIPTION 8 Max Retrans 7 6 5 TX-Integer 4 3 Cell Bar Acces AC C09 AC C01 2 RE AC C08 AC C00 1

AC C15 AC C07

AC C14 AC C06

AC C13 AC C05

AC C12 AC C04

AC C11 AC C03

EC C10 AC C02

SUB PARAMETER DEFINITION Max Retrans 00 01 10 11 1 re transmission 2 re transmissions 4 re transmissions 7 re transmissions

TX Integer Bits 6 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1

5 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1

Number of time slots to spread transmission 4 3 0 0 3 slots used to spread transmission 0 1 4 slots used to spread transmission 1 0 5 slots used to spread transmission 1 1 6 slots used to spread transmission 0 0 7 slots used to spread transmission 0 1 8 slots used to spread transmission 1 0 9 slots used to spread transmission 1 1 10 slots used to spread transmission 0 0 11 slots used to spread transmission 0 1 12 slots used to spread transmission 1 0 14 slots used to spread transmission 1 1 16 slots used to spread transmission 0 0 20 slots used to spread transmission 0 1 25 slots used to spread transmission 1 0 32 slots used to spread transmission 1 1 50 slots used to spread transmission

Cell Bar Access: Cell barred for access 0: the cell is not barred. 1: the cell is barred. RE Call Re-establishment allowed 0: Re-establishment allowed in the cell 1: Re-establishment not allowed in the cell

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2bis 3BK 11203 0138 DSZZA 445/639

EC Emergency Call allowed (Octet 2 bit 3) 0: Emergency Call allowed in the cell to all MSs 1: Emergency Call not allowed in the cell except for the MSs that belong to one of the classes between 11 to 15 AC CN : Access Control Class N (octet 2 except bit 3) and octet 3. For a mobile station with AC CN, access is not barred if the AC CN bit is coded with "0" ; N = 0,1..9,11..15. PARAMETER ORIGIN - ACTION ON PARAMETER All the parameters are given to BSC during configuration and may be changed with OMC requests or by BSC due to "Overload" or "Reset" actions. 6.52.4 SI 2BIS REST OCTETS TYPE: M DEFINITION This parameter consists of spare bits only and is used to allow the introduction of new information on the BCCH in later phases. BIT DESCRIPTION 8 7 6 5 4 3 2 1

0 Spare

0 Spare

1 Spare

0 Spare

1 Spare

0 Spare

1 Spare

1 Spare

SUB PARAMETER DEFINITION

PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2bis 3BK 11203 0138 DSZZA 446/639

6.53 SYSTEM INFORMATION TYPE 2TER


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO BCCH 44.018

SYSTEM INFORMATION TYPE 2TER ABIS A

This message is sent optionally on the BCCH by the network to stations within the cell giving information on the extension of the BCCH allocation in the neighbour cells. The SI2ter message may also provide the MS with information on the 2G-to-3G cell reselections. From: BTS INFORMATION ELEMENT NAME To: MS TYPE MV MV MV MV COMMENT (1) LENGTH (byte) 1 2 16 4 23 TIMER

DIRECTION

INFORMATION ELEMENT LIST

L2 Pseudo Length Header Extended BCCH Frequency List SI 2ter Rest Octets

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. BSS Init of Telecom part Overload Control (ref. [19]) (ref. [16]) ABNORMAL SITUATION

(1)

The ALCATEL BSS is compliant to GSM ETR 09.94 for phase 1 MS in biband networks. L2 pseudo-length of SYSTEM INFORMATION TYPE 2ter is set to 0.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2ter 3BK 11203 0138 DSZZA 447/639

6.53.1 GENERAL DESCRIPTION P-GSM 8 L2 Pseudo Length 0 0 Neighbour Cell Description 2 FORM AT-ID 0 0 7 6 0 0 5 0 0 BA-IND 4 0 3 1 2 0 0 0 1 1 1 1 1 0

L2 Pseudo Length Value=0

SI 2ter Rest Octets

BA ARFCN 008 SI 2ter R.O. 32 SI 2ter R.O. 24 SI 2ter R.O. 16 SI 2ter R.O. 8

BA BA BA BA ARFCN ARFCN ARFCN ARFCN 124 123 122 121 BA BA BA BA BA BA BA BA ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN 120 119 118 117 116 115 114 113 ................ BA ARFCN 007 SI 2ter R.O. 31 SI 2ter R.O. 23 SI 2ter R.O. 15 SI 2ter R.O. 7 BA ARFCN 006 SI 2ter R.O. 30 SI 2ter R.O. 22 SI 2ter R.O. 14 SI 2ter R.O. 6 BA ARFCN 005 SI 2ter R.O. 29 SI 2ter R.O. 21 SI 2ter R.O. 13 SI 2ter R.O. 5 BA ARFCN 004 SI 2ter R.O. 28 SI 2ter R.O. 20 SI 2ter R.O. 12 SI 2ter R.O. 4 BA ARFCN 003 SI 2ter R.O. 27 SI 2ter R.O. 19 SI 2ter R.O. 11 SI 2ter R.O. 3 BA BA ARFCN ARFCN 002 001 SI 2ter SI 2ter R.O. 26 R.O. 25 SI 2ter SI 2ter R.O. 18 R.O. 17 SI 2ter SI 2ter R.O. 10 R.O. 9 SI 2ter SI 2ter R.O. 2 R.O. 1

Multiband reporting

Note:

SI2 ter Rest Octets shall be filled as described in 6.53.3.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2ter 3BK 11203 0138 DSZZA 448/639

E-GSM, GSM850, DCS 1800, DCS1900 8 L2 Pseudo Length 0 0 FORM AT-ID 1 ORIGARFCN (low) : RRFCN 104 SI 2ter R.O. 32 SI 2ter R.O. 24 SI 2ter R.O. 16 SI 2ter R.O. 8 0 0 7 6 0 0 5 0 0 BA-IND 4 0 3 1 2 0 0 0 1 1 1 1 1 0

L2 Pseudo Length Value=0

Neighbour Cell Description 2

ORIG-ARFCN (middle part) RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN 1 2 3 4 5 6 7 RRFCN 105 SI 2ter R.O. 31 SI 2ter R.O. 23 SI 2ter R.O. 15 SI 2ter R.O. 7 RRFCN 106 SI 2ter R.O. 30 SI 2ter R.O. 22 SI 2ter R.O. 14 SI 2ter R.O. 6 RRFCN 107 SI 2ter R.O. 29 SI 2ter R.O. 21 SI 2ter R.O. 13 SI 2ter R.O. 5 RRFCN 108 SI 2ter R.O. 28 SI 2ter R.O. 20 SI 2ter R.O. 12 SI 2ter R.O. 4 RRFCN 109 SI 2ter R.O. 27 SI 2ter R.O. 19 SI 2ter R.O. 11 SI 2ter R.O. 3 : RRFCN RRFCN 110 111 SI 2ter SI 2ter R.O. 26 R.O. 25 SI 2ter SI 2ter R.O. 18 R.O. 17 SI 2ter SI 2ter R.O. 10 R.O. 9 SI 2ter SI 2ter R.O. 2 R.O. 1

Multiband reporting

FORMAT-ID (continued) Note

ORIGARFCN high

SI 2ter Rest Octets

The encoding described above is used with FORMAT-ID set to Variable bitmap when a dummy ARFCN needs to be encoded in the SI2ter message because there is no additional 2G frequency to encode in the SI2ter message but the SI2ter message has to be present to describe 3G frequencies. Notes : 1) 0 x x: Range 1024 format; 1 0 0: Range 512 format; 1 0 1: Range 256 format; 1 1 0: Range 128 format; 1 1 1: Variable bit map. 2) SI2 ter Rest Octets shall be filled as described in 6.53.3.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2ter 3BK 11203 0138 DSZZA 449/639

6.53.2 EXTENDED BCCH FREQUENCY LIST / NEIGHBOUR CELLS DESCRIPTION 2 TYPE: M DEFINITION To provide the absolute radio frequency channel numbers of the BCCH carriers to be monitored by the MS in the cell. Used for cell selection/reselection. BIT DESCRIPTION Bitmap 0 Format 8 0 supported 7 6 5 4 3 2 1 1 2

BA BA-IND BA BA BA ARFCN ARFCN ARFCN ARFCN Multiband 124 123 122 121 Reporting BA BA BA BA BA BA BA BA ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN 120 119 118 117 116 115 114 113 ................
FORMAT-ID

BA BA BA BA BA BA BA BA ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN 008 007 006 005 004 003 002 001

16

SUB PARAMETER DEFINITION FORMAT-ID Multiband reporting BA-IND BA ARFCN N Format identifier Binary coded minimum number of cells of each supported band to be included in MEASUREMENT REPORT message (if available). Range 0 to 3, set by O&M. BCCH allocation sequence number indication Range 0 to 1 BCCH Allocation Absolute RF Channel Number N if ARFCN = N belongs to the BCCH allocation, BA ARFCN N bit is coded with "1" N = 1,2 ... 124 if not, BA ARFCN N bit is coded with "0" ; N=1,2 ...124

(Note : the number of neighbour BCCH frequencies is limited to 32)

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2ter 3BK 11203 0138 DSZZA 450/639

Range 1024 format 8


FORMAT-ID

supported 7 Multiband Reporting 6 BA-IND 5 4 0 F0 3 W(1) (high part) 2 1 1

W(2) (low) W(3) (low part) W(4) (low part) W(5) (low part) W(6) (low part) W(8) (low) W(7) (low part)

W(2) (high part)

FORM AT-ID W(1) (low part) W(3) (high part) W(4) (high part) W(5) (high part) W(7) (high part) W(9) W(6) (high part) W(8) (high part) W(11) (high) W(12) (high part)

4 5 6 8 7 9

10 11 12 13

W(10) W(12) (low part) W(11) (low part)

W(15) (low part)

W(14) (low part)

W(13) (low part)

W(15) (high part) W(16)

W(14) (high part)

W(13) (high part)

14

15

16

SUB PARAMETER DEFINITION FORMAT-ID Multiband reporting BA-IND F0 W(i) Format identifier Binary coded minimum number of cells of each supported band to be included in MEASUREMENT REPORT message (if available). Range 0 to 3, set by O&M BCCH allocation sequence number indication Range 0 to 1 Frequency indicator 0 ARFCN 0 is not a member of the set 1 ARFCN 0 is a member of the set Each W(i) encodes a non negative integer in binary if W(k) is null, W(K+1) to W(16) must be null also

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2ter 3BK 11203 0138 DSZZA 451/639

Range 512 format 1 FORM AT-ID 8

supported 7 6 0 0 FORMAT-ID (continued) ORIG-ARFCN (middle part) W(1) (high part) W(2) (high part) BA-IND 5 4 1 3 2 ORIGARFCN 1 1 2 4

Multiband Reporting

ORIGARFCN W(1) (low part) W(3) (low part) W(4) (low) W(2) (low)

3 5

W(4) (high part) W(5) W(6)

W(3) (high part)

6 W(7) (high) W(8) (high part)

7 8

W(9) (low part)

W(8) (low part)

W(7) (low part)

W(13) (low part)

W(12) (low part)

W(11)

W(10)

W(9) (high part)

10

W(16) (low part) SUB PARAMETER DEFINITION FORMAT-ID Multiband reporting BA-IND ORIG-ARFCN W(i)

W(15)

W(14)

W(13) (high part)

W(12) (high)

11

13

12

W(17)

W(16) (high)

14

16

15

Format identifier Binary coded minimum number of cells of each supported band to be included in MEASUREMENT REPORT message (if available). Range 0 to 3, set by O&M BCCH allocation sequence number indication Range 0 to 1 This field encodes the ARFCN of one frequency belonging to the set. This value is also used as the origin of the bit map to generate all the other frequencies. Each W(i) encodes a non negative integer in binary. if W(k) is null, W(K+1) to W(17) must be null also.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2ter 3BK 11203 0138 DSZZA 452/639

Range 256 format 1 FORM AT-ID ORIGARFCN W(1) (loW) 8

supported 7 6 0 1 FORMAT-ID (continued) ORIG-ARFCN (middle part) W(1) (high part) W(2) W(3) W(4) (low part) W(7) W(10) W(4) (high) W(5) (high part) W(8) (high) BA-IND 5 4 1 3 2 ORIGARFCN 1 1 2 4 5 6 7

Multiband Reporting

W(6) (low)

W(5) (low part)

W(6) (high part)

W(9) (low) W(11) (low part) W(14) (low part)

W(8) (low part)

W(9) (high part) W(12) W(15) W(17) W(19) W(21)

W(11) (high)

10 12 11 13 14 15 16

W(13)

W(14) (high part)

W(16) (low part) W(18) (low part) W(20) (low part)

W(16) (high) W(18) (high) W(20) (high) 0 spare

SUB PARAMETER DEFINITION FORMAT-ID Multiband reporting BA-IND ORIG-ARFCN W(i) Format identifier Binary coded minimum number of cells of each supported band to be included in MEASUREMENT REPORT message (if available). Range 0 to 3, set by O&M. BCCH allocation sequence number indication Range 0 to 1 This field encodes the ARFCN of one frequency belonging to the set. This value is also used as the origin of the bit map to generate all the other frequencies. Each W(i) encodes a non negative integer in binary. if W(k) is null, W(K+1) to W(21) must be null also.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2ter 3BK 11203 0138 DSZZA 453/639

Range 128 format 1 FORM AT-ID ORIGARFCN 8

supported 7 6 1 0 FORMAT-ID (continued) ORIG-ARFCN (middle part) W(1) W(2) W(5) BA-IND 5 4 1 3 2 ORIGARFCN 1 1 2 3 5 4

Multiband Reporting

W(4) (low) W(6) (low part) W(8)

W(3) (low part)

W(4) (high part) W(7)

W(3) (high part)

W(6) (high part)

6 7 8

W(10) W(12) W(16) W(14) W(19) W(22) W(27) W(17)

W(11) W(13) W(15) W(20) W(18) (high)

W(9)

10 11 12

W(18) (low) W(21) (low) W(26) (low)

W(24)

W(25)

W(23) W(28)

W(21) (high)

13 15 14 16

W(26) (high)

0 spare

SUB PARAMETER DEFINITION FORMAT-ID Multiband reporting BA-IND ORIG-ARFCN W(i) Format identifier Binary coded minimum number of cells of each supported band to be included in MEASUREMENT REPORT message (if available). Range 0 to 3, set by O&M. BCCH allocation sequence number indication Range 0 to 1. This field encodes the ARFCN of one frequency belonging to the set. This value is also used as the origin of the bit map to generate all the other frequencies. Each W(i) encodes a non negative integer in binary. if W(k) is null, W(K+1) to W(28) must be null also.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2ter 3BK 11203 0138 DSZZA 454/639

Variable Bit Map format 8 1 FORM AT-ID 7

supported 6 5 BA-IND 4 1 3 2 1 1 2

1 1 ORIGFORMAT-ID ARFCN (continued) high ORIG-ARFCN (middle part) ORIG- RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN ARFCN 1 2 3 4 5 6 7 (low) : : RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN 104 105 106 107 108 109 110 111 Multiband Reporting SUB PARAMETER DEFINITION FORMAT-ID Multiband reporting BA-IND ORIG-ARFCN RRFCN N

16

Format identifier Binary coded minimum number of cells of each supported band to be included in MEASUREMENT REPORT message (if available). Range 0 to 3, set by O&M. BCCH allocation sequence number indication Range 0 to 1 This field encodes the ARFCN of one frequency belonging to the set. This value is also used as the origin of the bit map to generate all the other frequencies. Relative radio frequency channel number N For an RF channel with ARFCN = ORIG-ARFCN + N) mod 1024 belonging to the set, then RRFCN N bit is coded as '1'. For an RF channel with ARFCN = (ORIG-ARFCN + N) mod 1024 not belonging to the set, then RRFCN N bit is coded as '0'. Note: the number of neighbour BCCH frequencies is limited to 32

The following setting of the variable format is used when a dummy ARFCN needs to be encoded in the SI2ter message: FORMAT-ID Multiband reporting BA-IND ORIG-ARFCN RRFCN N Set to Variable bitmap Set to 00 BCCH allocation sequence number indication Range 0 to 1. This field encodes the dummy ARFCN defined by the parameter DUMMY_ARFCN_FOR_SI2TER. This value is also used as the origin of the bit map to generate all the other frequencies. Relative radio frequency channel number N All the RRFCN are set to 0.

PARAMETER ORIGIN - ACTION ON PARAMETER All the parameters are given during configuration and updated by OMC requests.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2ter 3BK 11203 0138 DSZZA 455/639

6.53.3 SI 2TER REST OCTETS TYPE: M DEFINITION If UTRAN FDD cell reselection is enabled and FDD UTRAN frequencies are declared in the BSC, this parameter contains optional information on UTRAN cells to be monitored by the MS in the cell. Otherwise, it consists of spare bits only and is used to allow the introduction of new information on the BCCH in later phases. BIT DESCRIPTION 1) If one UARFCN frequency is present in SI2ter instance, the SI2ter Rest Octet IE is filled as follows: L|H = 1 SI2ter_ SI2ter_ MP_CH 3G_CH ANGE_ ANGE_ MARK MARK SI2ter_ PI=1 PI=0 COUN T FDD-ARFCN Note: PI = 0 8 7 6 5 SI2ter_INDEX 4 3 SI2ter_COUNT 2 1 1

PI=1 FDD-ARFCN

FDD-ARFCN

2 3

PI = 0

PI = 0

0 Spare

1 Spare

1 Spare

If the SI2ter message describes 3G neighbour cells, the last SI 2ter instance always contains the 3G measurement parameters description. The preceding SI 2ter instances provide the MS with the UARFCN frequency description. Thus, if there are n UARFCN frequencies in the FDD_ARFCN_LIST given by the OMC, the number of SI 2ter instances is n + 1.

2) If the 3G measurement parameters are described in the SI2ter instance, the SI 2ter Rest Octet IE is filled as follows: 8 7 6 5 4 3 2 1

L|H = 1

SI2ter_ SI2ter_ SI2ter_INDEX SI2ter_COUNT MP_CH 3G_CH ANGE_ ANGE_ MARK MARK SI2ter_ PI=0 PI = 0 PI = 1 Qsearch_I COUN T PI = 1 FDD_Qoffset FDD_Qmin PI = 0 0 Spare 1 Spare 0 Spare 1 Spare 0 Spare 1 Spare

2 3

1 Spare

3) Otherwise, the SI 2ter Rest Octets IE is filled with spare bits as follows: L|H = 0 8 0 Spare 7 1 Spare 6 0 Spare 5 1 Spare 4 0 Spare 3 1 Spare 2 1 Spare 1 1

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2ter 3BK 11203 0138 DSZZA 456/639

0 Spare 0 Spare 0 Spare

0 Spare 0 Spare 0 Spare

1 Spare 1 Spare 1 Spare

0 Spare 0 Spare 0 Spare

1 Spare 1 Spare 1 Spare

0 Spare 0 Spare 0 Spare

1 Spare 1 Spare 1 Spare

1 Spare 1 Spare 1 Spare

2 3 4

SUB PARAMETER DEFINITION SI2ter_MP_CHANGE_MARK: Indicates whether or not 3G Measurement parameters shall be re-read. SI2ter_3G_CHANGE_MARK: Indicates whether or not UTRAN FDD Description shall be re-read. SI2ter_COUNT : Binary representation minus one of the number of SI2ter instances. SI2ter_INDEX : Binary representation of the index of the instance of the SI2ter. FDD-ARFCN: Nu = 5 * (F MHz), 0.0 MHz F 3276.6 MHz. The OMC provides the BSC with the FDDARFCN in the O&M FDD ARFCN list denoted FDD_ARFCN_LIST. Qsearch_I: Search for 3G cells if signal level is below (0-7) or above (8-15) threshold. 0 = - 98 dBm, 1 = - 94 dBm, , 6 = - 74 dBm, 7 = (always) 8 = - 78 dBm, 9 = - 74 dBm, , 14 = - 54 dBm, 15 = (never). Note that, on MS side, default value = (never). FDD_Qoffset: Applies an offset to RLA_C for cell re-selection to access technology. 0 = - (always select a cell if acceptable), 1 = -28 dB, 2 = -24 dB, , 15 = 28 dB. Note that, on MS side, default value = 0 dB. FDD_Qmin: A minimum threshold for Ec/No for UTRAN FDD cell re-selection. 0 = -20 dB, 1 = -6 dB, 2 = -18 dB, 3 = -8 dB, 4 = -16 dB, 5 = -10 dB, 6 = -14 dB, 7 = -12 dB. Note that, on MS side, default value = -12 dB. PARAMETER ORIGIN - ACTION ON PARAMETER SI2ter_MP_CHANGE_MARK: This toggle shall be changed at each change of information concerning 3G Measurement Parameters parameter shall be incremented. The same value shall be kept in every SI 2ter instance belonging to the same set of SI 2ter messages. SI2ter_3G_CHANGE_MARK: This toggle shall be changed at each change of information concerning UTRAN FDD Description and UTRAN TDD Description. The same value shall be kept in every SI 2ter instance belonging to the same set of SI 2ter messages. SI2ter_INDEX: The SI2ter_INDEX field is binary coded, range 0 to 7, and indexes each instance of SI2ter. LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2ter 3BK 11203 0138 DSZZA 457/639

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

All other sub-parameters are set by O & M and stored in BSC and may change according to OMC action.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2ter 3BK 11203 0138 DSZZA 458/639

6.54 SYSTEM INFORMATION TYPE 2QUATER


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO BCCH/ BCCH extended 44.018 This message is sent optionally on either the BCCH or the BCCH extended( if it is configured in the cell) by the network to stations within the cell giving information on additional measurement and reporting parameters and/or UTRAN neighbour cells. From: BTS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST L2 Pseudo Length Header SI 2quater Rest Octets To: MS TYPE MV MV MV COMMENT (1) LENGTH (byte) 1 2 20 23 TIMER SYSTEM INFORMATION TYPE 2QUATER ABIS A

DIRECTION

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. BSS Init of Telecom part Overload Control (ref. [19]) (ref. [16]) ABNORMAL SITUATION

(1)

The ALCATEL BSS is compliant to GSM ETR 09.94 for phase 1 MS in biband networks. L2 pseudo-length of SYSTEM INFORMATION TYPE 2quater is set to 0.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2quater 3BK 11203 0138 DSZZA 459/639

6.54.1 GENERAL DESCRIPTION 8 L2 Pseudo Length 0 0 SI 2quater Rest Octets 0 0 7 6 0 0 5 0 0 .... 4 0 3 1 2 0 0 1 1 1 1 1 1 0

L2 Pseudo Length Value=0

SI2 quater Rest Octets shall be filled as described in 6.53.3. ..

6.54.2 SI 2QUATER REST OCTETS TYPE: M DEFINITION The SI 2quater Rest Octets information element contains neighbour cell lists for UTRAN cells. For cell reselection, it is used to build the 3G Cell Reselection list. BIT DESCRIPTION < SI2quater Rest Octets > ::= < BA_IND : bit (1) > < 3G_BA_IND : bit (1) > < MP_CHANGE_MARK : bit (1) > < SI2quater_INDEX : bit (4) > < SI2quater_COUNT : bit (4) > { 0 | 1 < Measurement_Parameters Description : < Measurement Parameters Description struct >> } { 0 | 1 < GPRS_Real Time Difference Description : < GPRS_Real Time Difference Description struct >> } { 0 | 1 < GPRS_BSIC Description : < GPRS_BSIC Description struct >> } { 0 | 1 < GPRS_REPORT PRIORITY Description : < GPRS_REPORT_PRIORITY Description struct >> } { 0 | 1 < GPRS_MEASUREMENT_Parameters Description : < GPRS_MEASUREMENT Parameters Description struct >> } { 0 | 1 < NC Measurement Parameters : < NC Measurement Parameters struct >> } { 0 | 1 < extension length : bit (8) > < < bit (val(extension length)+1) > & { < SI2q Extension Information > ! { Ignore: bit ** = <no string> } } > } ED EVOLIUM 05 RELEASED LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2quater 3BK 11203 0138 DSZZA 460/639

0138_05.doc 15/02/2008

{ 0 | 1 < 3G Neighbour Cell Description : < 3G Neighbour Cell Description struct >> } { 0 | 1 < 3G Measurement Parameters Description : < 3G Measurement Parameters Description struct >> } { 0 | 1 < GPRS_3G_MEASUREMENT Parameters Description : < GPRS_3G MEASUREMENT Parameters Description struct >> } { null | L |H {0|1 < 3G Additional Measurement Parameters Description : < 3G Additional Measurement Parameters Description struct >> } {0|1 < 3G ADDITIONAL MEASUREMENT Parameters Description 2 : < 3G ADDITIONAL MEASUREMENT Parameters Description 2 struct >> } { null | L |H < 3G_CCN_ACTIVE : bit (1) >

}} < spare padding > ;

<MEASUREMENT PARAMETERS Description Struct > ::= < REPORT_TYPE : bit > < SERVING_BAND_REPORTING : bit (2) > ; < GPRS Real Time Difference Description struct > ::= {0|1 {0|1 < BA_Index_Start_RTD : bit (5) > } < RTD : < RTD6 Struct >> { 0 < RTD : < RTD6 Struct >> } **1 } {0|1 {0|1 < BA_Index_Start_RTD : bit (5) > } < RTD : < RTD12 Struct >> { 0 < RTD : < RTD12 Struct >> } **1 }; < RTD6 Struct > ::= { 0 < RTD : bit (6) > } ** 1; < RTD12 Struct > ::= { 0 < RTD : bit (12) > } ** 1; < GPRS BSIC Description struct > ::= { 0 | 1 < BA_Index_Start_BSIC : bit (5) > } < BSIC : bit (6) > < Number_Remaining_BSIC: bit (7) > { < Frequency_Scrolling : bit > < BSIC : bit (6) > } * (val(Number_Remaining_BSIC)) ; < GPRS REPORT PRIORITY Description struct > ::= < Number_Cells : bit (7) > { REP_PRIORITY: bit } * (val(Number_Cells)) ; < GPRS MEASUREMENT PARAMETERS Description struct > ::= < REPORT_TYPE : bit > < REPORTING_RATE : bit > < INVALID_BSIC_REPORTING : bit > {0|1 < MULTIBAND_REPORTING : bit (2) > } {0|1 < SERVING_BAND_REPORTING : bit (2) > } < SCALE_ORD : bit(2) > {0|1 < 900_REPORTING_OFFSET : bit (3) > < 900_REPORTING_THRESHOLD : bit (3) > } ED EVOLIUM 05 RELEASED LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2quater 3BK 11203 0138 DSZZA 461/639

0138_05.doc 15/02/2008

{0|1 < 1800_REPORTING_OFFSET : bit (3) > < 1800_REPORTING_THRESHOLD : bit (3) > } {0|1 < 400_REPORTING_OFFSET : bit (3) > < 400_REPORTING_THRESHOLD : bit (3) > } {0|1 < 1900_REPORTING_OFFSET : bit (3) > < 1900_REPORTING_THRESHOLD : bit (3) > } {0|1 < 850_REPORTING_OFFSET : bit (3) > < 850_REPORTING_THRESHOLD : bit (3) > } ; < NC Measurement Parameters struct > ::= < NETWORK_CONTROL_ORDER : bit (2) > { 0 | 1 < NC_ NON_DRX_PERIOD : bit (3) > < NC_REPORTING_PERIOD_I : bit (3) > < NC_REPORTING_PERIOD_T : bit (3) > } ; < SI2q Extension Information > :: = {0|1 < CCN Support Description : < CCN Support Description struct >> } <spare bit>** ; < CCN Support Description struct > ::= < Number_Cells : bit (7) > { CCN_SUPPORTED : bit } * (val(Number_Cells)) ; < 3G Neighbour Cell Description struct > ::= { 0 | 1 < Index_Start_3G : bit (7) } { 0 | 1 < Absolute_Index_Start_EMR : bit (7) } { 0 | 1 < UTRAN FDD Description : UTRAN FDD Description struct >> } { 0 | 1 < UTRAN TDD Description : UTRAN TDD Description struct >> } ; < UTRAN FDD Description struct > ::= { 0 | 1 < Bandwidth_FDD : bit (3)> } { 1 < Repeated UTRAN FDD Neighbour Cells : <Repeated UTRAN FDD Neighbour Cells struct >> } ** 0 ; < Repeated UTRAN FDD Neighbour Cells struct > ::= 0 < FDD-ARFCN : bit (14) > < FDD_Indic0 : bit > < NR_OF_FDD_CELLS : bit (5) > < FDD_CELL_INFORMATION Field : bit(p(NR_OF_FDD_CELLS)) > ; < UTRAN TDD Description struct > : := { 0 | 1 < Bandwidth_TDD : bit (3)> } { 1 < Repeated UMTS TDD Neighbour Cells : <Repeated UMTS TDD Neighbour Cells struct >> } ** 0 ; < Repeated UTRAN TDD Neighbour Cells struct > ::= 0 < TDD-ARFCN : bit (14) > < TDD_Indic0 : bit > < NR_OF_TDD_CELLS : bit (5) > < TDD_CELL_INFORMATION Field : bit(q(NR_OF_TDD_CELLS) > ; < 3G MEASUREMENT PARAMETERS Description struct > ::= < Qsearch_I : bit (4) > < Qsearch_C_Initial : bit (1) > LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2quater 3BK 11203 0138 DSZZA 462/639

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

{0|1 < FDD_Qoffset : bit (4) > FDD_REP_QUANT : bit (1) > < FDD_MULTIRAT_REPORTING : bit (2) > < FDD_Qmin : bit (3) > } {0|1 < TDD_Qoffset : bit (4) > < TDD_MULTIRAT_REPORTING : bit (2) > } ; < GPRS 3G MEASUREMENT PARAMETERS Description struct > ::= < Qsearch_P : bit (4) > < 3G_SEARCH_PRIO : bit > {0|1 < FDD_REP_QUANT : bit > < FDD_MULTIRAT_REPORTING : bit (2) > } {0|1 < FDD_REPORTING_OFFSET : bit (3) > < FDD_REPORTING_THRESHOLD : bit (3) > } {0|1 < TDD_MULTIRAT_REPORTING : bit (2) > } {0|1 < TDD_REPORTING_OFFSET : bit (3) > < TDD_REPORTING_THRESHOLD : bit (3) > } ; < 3G Additional Measurement Parameters Description struct > ::= < FDD_Qmin_Offset : bit (3) > < FDD_RSCPmin : bit (4) > ; < 3G Additional Measurement Parameters Description 2 struct > ::= { 0 | 1 < FDD_REPORTING_THRESHOLD_2 : bit (6) > } ;

<

Note: parameters that dont present in SUB PARAMETER DEFINITION are not used in Alcatel BSS. Example 1: Case of 3 UTRAN TDD ARFCNs, for each ARFCN there are 4 cells (for a 2G cell , the number of FDD/TDD ARFCNs is respectively lower or equal to 3), EN_2G_TO_3GTDD_CELL_RESELECTION is not set to 0, and PBCCH not activated in the cell. There are two instances in this example. Instance 1:

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2quater 3BK 11203 0138 DSZZA 463/639

BA_ IND

PI=0

3G_ MP_CH BA_ ANGE_ IND MARK SI2quater_COUNT = 1 PI=1 (3G Nb) Bandwidth_TDD TDD ARFCN 1 PI=0

SI2quater_INDEX = 0 PI=0 PI=0 PI=0 PI=0 PI=0

PI=0 PI=0 PI=1

NR_OF _CELL S

TDD_In NR_OF_CELLS dic0 TDD_CELL_INFORMATION TDD_CELL_INFORMATION TDD_CELL_INFORMATION TDD_CELL_INFORMATION

TDD ARFCN 1

PI=1 PI=1 (TDD Des) TDD ARFCN 1

PI=0

SI2quat er_CO UNT PI=0

1 2 3 4 5 6 7 8 10 11 9

TDD_C ELL_IN FORM ATION

PI=1

PI=0

TDD ARFCN 2

TDD TDD_In ARFCN dic0 2

TDD ARFCN 2

NR_OF_CELLS

TDD_CELL_INFORMATION TDD_CELL_INFORMATION TDD_CELL_INFORMATION TDD_CELL_INFORMATION Spare bit

TDD_C ELL_IN FORM ATION

12 13

14 15 16 17 18

PI=0 Instance 2:

PI=0

PI=0

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2quater 3BK 11203 0138 DSZZA 464/639

BA_ IND

PI=0

3G_ MP_CH BA_ ANGE_ IND MARK SI2quater_COUNT = 1 PI=1 (3G Nb) Index_Start_3G PI=1 PI=0

SI2quater_INDEX = 1 PI=0 PI=0

PI=0 PI=1

Index_Start_3G PI=1 PI=1 (TDD Des) TDD ARFCN 3

PI=0

SI2quat er_CO UNT PI=0

1 2 3 4 5 6 7 8 10 9

PI=0 PI=0

PI=0

Bandwidth_TDD TDD ARFCN 3

Bandwi dth_TD D

TDD_In NR_OF_CELLS dic0 TDD_CELL_INFORMATION TDD_CELL_INFORMATION TDD_CELL_INFORMATION TDD_CELL_INFORMATION Qsearch_I

TDD ARFCN 3

PI=0 PI=1

PI=1

TDD_Qoffset Qsearch_P

PI=0

Qsearc h_C_Ini tial TDD_MULTIRAT _REPORTING 3G_SE PI=0 PI=0 ARCH_ PRIO Spare bit

PI=0 PI=1 PI=0

11 12 13 14 15

Example 2: Case of 3 UTRAN FDD ARFCNs (for a 2G cell , the number of FDD/TDD ARFCNs is respectively lower or equal to 3), EN_2G_TO_3G_CELL_RESELECTION and EN_CPICH_2G_3G_RESELECTION are not set to 0, EN_2G_TO_3GTDD_CELL_RESELECTION is set to 0, and PBCCH activated in the cell. BA_ IND 8 3G_ MP_CH BA_ ANGE_ IND MARK SI2quater_COUNT 7 6 5 SI2quater_INDEX PI=0 PI=0 4 3 2 SI2quat er_CO UNT PI=0 1 1 2

PI=0

PI=0

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2quater 3BK 11203 0138 DSZZA 465/639

PI=0

PI=0

PI=0

PI=1

PI=0

FDD_ARFCN NR_OF_FDD_CELLS FDD_ARFCN

FDD_ARFCN

PI=0

PI=1

PI=0

PI=1 FDD_In dic0 FDD_A RFCN

5 6 8

PI=1

PI=0

FDD_ARFCN PI=1 PI=0

NR_OF_FDD_CELLS FDD_ARFCN NR_OF _FDD_ CELLS Qsearc h_C_Ini tial PI=0 PI=1 FDD_Qmin PI=0

FDD_In dic0 PI=1

FDD_ARFCN

FDD_In NR_OF_FDD_C dic0 ELLS FDD_ARFCN NR_OF_FDD_CELLS Qsearch_I FDD_R EP_QU ANT 0 (HIGH)
FDD_MU LTIRAT_ REPORTI NG

7 9

11 12 13 14 15

10

FDD_Qoffset PI=0 PI=0

FDD_MU LTIRAT_ REPORTI NG

PI=1 PI=0

FDD_Qmin_Offset

FDD_RSCPmin

SUB PARAMETER DEFINITION BA_IND: BCCH allocation sequence number indication. Range 0 to 1. 3G_BA_IND: 3G BCCH allocation sequence number indication. Indicates whether or not the MS shall re-read all instances and rebuild the 3G Neighbour Cell list. MP_CHANGE_MARK: Indicates whether or not 3G Measurement parameters shall be re-read. 0 at initialisation. SI2quater_INDEX : This field is binary coded, range 0 to 15, and indexes each instance of SI2quater Rest Octet information element. SI2quater_COUNT : Binary representation minus one of the number of SI2quater instances. Index_Start_3G (7 bit field) This optional information element indicates the binary value of the first index to use to build this instance of the 3G Neighbour Cell list. In the first instance (i.e. when MI_INDEX = 0) this parameter is not sent. FDD_ARFCN: UTRAN FDD central frequency. This IE set by O&M is defined as the UARFCN in 3GPP TS 25.101. FDD_Indic0: ED EVOLIUM 05 RELEASED LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2quater 3BK 11203 0138 DSZZA 466/639

0138_05.doc 15/02/2008

This field indicates if the FDD_CELL_INFORMATION parameter value 0000000000 is a member of the set or not. Set to 0 NR_OF_FDD_CELLS Set to 31 Bandwidth_TDD (3 bit field) Bit 321 000 3.84Mcps 001 1.28Mcps Set to 001 TDD_ARFCN (14 bit field) This parameter is UTRAN TDD central frequency, defined as the UARFCN in 3GPP TS 25.102. Set by O&M. TDD_Indic0, information 0 indicator (1 bit): This field indicates if the TDD_CELL_INFORMATION parameter value '0000000000' is a member of the set or not. Set to 0. NR_OF_TDD_CELLS (5 bit field) This field defines the number of TDD_CELL_INFORMATION parameters. Set according to O&M. TDD_CELL_INFORMATION Field (q bit field) This field allows to compute a set of 9-bit-long TDD_CELL_INFORMATION parameters, re-using the Range 512 format compression algorithm. For each (9-bit-long) decoded Parameter, bits 1-7 are the Cell Parameter, bit 8 is the Sync Case TSTD and bit 9 is the Diversity TDD bit. The total number of bits q of this field depends on the value of the parameter NR_OF_TDD_CELLS = m, as follows: m q m q m q 0 0 5 39 10 71 1 9 6 46 11 77 2 17 7 53 12 83 3 25 8 59 4 32 9 65 Note: there will be up to 12 TDD neighbour cells for a given 2G cell. Qsearch_I: Search for 3G cells if signal level is below (0-7) or above (8-15) threshold. 0 = - 98 dBm, 1 = - 94 dBm, , 6 = - 74 dBm, 7 = (always) 8 = - 78 dBm, 9 = - 74 dBm, , 14 = - 54 dBm, 15 = (never). Note that, on MS side, default value = (never). Set by O&M Qsearch_C_Initial Indicates the Qsearch value to be used in connected mode before Qsearch_C is received, Set to 0 (use Q_Isearch) FDD_Qoffset: Applies an offset to RLA_C for cell re-selection to access technology. (0 = - (always select a cell if acceptable), 1 = -28 dB, 2 = -24 dB, , 15 = 28 dB. Note that, on MS side, default value = 0 dB.)??? ED EVOLIUM 05 RELEASED LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2quater 3BK 11203 0138 DSZZA 467/639

0138_05.doc 15/02/2008

Set by O&M. FDD_REP_QUANT: Indicates the reporting quantity for UTRAN FDD cells. Set to 0. FDD_MULTIRAT_REPORTING the number of cells from the access technology/mode FDD (one or more) that shall be included in the list of strongest cells or in the measurement report. Set to 0 FDD_Qmin A minimum threshold for Ec/No for UTRAN FDD cell re-selection Set by O&M TDD_Qoffset Offset added to the received level average of the serving cell and of the neighbour GSM cells for UTRAN TDD cell reselection. Set by O&M. TDD_MULTIRAT_REPORTING Set to 0. Qsearch_P Search for 3G cells if signal level below threshold (0-7) or above threshold (8-15)( for PBCCH). Set equal to Qsearch_I 3G_SEARCH_PRIO Indicate if 3G cells may be searched when BSIC decoding is required Set by O&M FDD_Qmin_Offset Applies an offset to FDD_Qmin value. 0 = 0 dB, 1 = 2 dB, ..., 7 = 14 dB. Set by O&M FDD_RSCPmin A minimum threshold of RSCP for UTRAN FDD cell re-selection. 0 = -115 dBm, 1 = -113 dBm, ..., 15 = -85 dBm. Set by O&M PARAMETER ORIGIN - ACTION ON PARAMETER BA_IND : The BA-IND is a one bit field which allows the BSC to differentiate MEASUREMENT REPORTs related to BCCH BA or to SACCH BA. To achieve this, the BSC shall ensure that BA-IND_SACCH is always the opposite of BA-IND_BCCH. 3G_BA_IND : It shall be toggled each time each time 3G Neighbour Cell information is changed. When the 3G_BA_IND parameter is changed, the MS shall re-read all instances and rebuild the 3G Neighbour Cell list. MP_CHANGE_MARK : This parameter shall be toggled, each time 3G Measurement have been changed.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 2quater 3BK 11203 0138 DSZZA 468/639

6.55 SYSTEM INFORMATION TYPE 3


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO BCCH 44.018

SYSTEM INFORMATION TYPE 3 ABIS A

This message is sent on the BCCH by the network to cell giving information of control of the RACH, of location area identification, of cell identity and various other information about the cell. From: BTS INFORMATION ELEMENT NAME To: MS TYPE MV MV MV MV MV MV MV MV MV COMMENT LENGTH (byte) 1 2 2 5 3 1 2 3 4 23 TIMER

DIRECTION

INFORMATION ELEMENT LIST

L2 Pseudo Length Header Cell Identity Location Area ID. Control Channel Description Cell Options ( BCCH ) Cell Selection Parameters RACH Control Parameters SI 3 Rest Octets

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. Paging Access Control (ref. [1]) Overload Control (ref. [16]) BSS Initialisation of the Telecom part (ref. [19]) BSS Global Reset (ref. [21]) System Information Management (ref. [24]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 3 3BK 11203 0138 DSZZA 469/639

6.55.1 GENERAL DESCRIPTION

8 L2 Pseudo Length 0 0 Cell Identity

7 0 0

6 0 0

5 0 1

4 0 1

3 1 0

2 0 1 1

1 1 0 1

L2 Pseudo Length Value=18

Cell Identity value (continued) MNC Digit 3 (Note) MNC Digit 2 LAC MCC Digit 2 MCC Digit 3 MCC Digit 1 MNC Digit 1

Cell Identity value

Location Area Identification

LAC (continued) Control Channel Description Cell Options Cell Selection Parameters MSCR 0 Spare ATT 0 CBQ3 0 BS-AG-BLKS-RES 0 0 Spare Spare T 3212 Timeout value CCCH-CONF BS-PA-MFRMS

0 PWRC Spare CELL RESELECT HYSTERESIS ACS NECI Max Retrans

DTX

Radio-Link-Timeout MS-TXPWR-MAX-CCH RXLEV-ACCESS-MIN TX-Integer Cell Bar Acces AC C9 AC C1 RE AC C8 AC C0

RACH Control Parameters SI 3 Rest Octets Note

AC C15 AC C7

AC C14 AC C6

AC C13 AC C5

AC C12 AC C4

AC C11 AC C3

EC AC C2

See the tables below for the detail

3 digits MNC is supported. Note that in case where only two digits MNC is used, the field MNC Digit 3 shall be filled in with 1111.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 3 3BK 11203 0138 DSZZA 470/639

Case 0 SI 3 Rest Octets detail description (without Optional Selection Parameters, without GPRS Indicator, with absence of SI2 QUATER): Information elements Length (bit) 1 1 1 1 1 1 1 1 Coding rules Set to L (Selection Parameters are not used) See 6.55.8 for detail. See 6.55.8 for detail. Set to L (Scheduling if and where is not used) Set to L (GPRS Indicator is not used) Set to L, see 6.55.8 for detail. Set to L (Optional Power offset is not used)

System Information 2ter Indicator

Early Classmark Sending Control

3G Early Classmark Sending Restriction SI2quater Indicator

Set to L :SI 2quater message is not broadcast

Case 1 SI 3 Rest Octets detail description (without Optional Selection Parameters, with GPRS Indicator, with absence of SI2 QUATER): Information elements Length (bit) 1 1 1 1 1 1 1 3 Coding rules Set to L (Selection Parameters are not used) See 6.55.8 for detail. See 6.55.8 for detail. Set to L (Scheduling if and where is not used) See 6.55.8 for detail. Set to H (GPRS Indicator is used) Set to L (Optional Power offset is not used)

System Information 2ter Indicator

Early Classmark Sending Control

RA COLOUR

SI13 POSITION

3G Early Classmark Sending Restriction SI 2quater indicator

See 6.55.8 for detail.

Set to L, see 6.55.8 for detail. Set to L : SI 2quater message is not broadcast

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 3 3BK 11203 0138 DSZZA 471/639

Case 2 SI 3 Rest Octets detail description (with Optional Selection Parameters, without GPRS Indicator, with absence of SI2 QUATER): Information elements CBQ Length (bit) 1 6 1 3 Coding rules See 6.55.8 for detail. Set to H (Selection Parameters are used)

CELL_RESELECT_OFFSET

TEMPORARY_OFFSET PENALTY_TIME

See 6.55.8 for detail.

System Information 2ter Indicator

1 1 1 1 1 1 1

See 6.55.8 for detail. See 6.55.8 for detail.

Set to L (Optional Power offset is not used)

See 6.55.8 for detail.

See 6.55.8 for detail.

Early Classmark Sending Control

Set to L (Scheduling if and where is not used) Set to L (GPRS Indicator is not used) Set to L, see 6.55.8 for detail.

3G Early Classmark Sending Restriction SI 2quater indicator

Set to L : SI 2quater message is not broadcast

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 3 3BK 11203 0138 DSZZA 472/639

Case 3 SI 3 Rest Octets detail description (with Optional Selection Parameters, with GPRS Indicator, with absence of SI2 QUATER ): Information elements CBQ Length (bit) 1 6 1 3 Coding rules See 6.55.8 for detail. Set to H (Selection Parameters are used)

CELL_RESELECT_OFFSET

TEMPORARY_OFFSET PENALTY_TIME

See 6.55.8 for detail.

System Information 2ter Indicator

1 1 1 1 1 1

See 6.55.8 for detail. See 6.55.8 for detail.

Set to L (Optional Power offset is not used)

See 6.55.8 for detail.

See 6.55.8 for detail.

Early Classmark Sending Control

Set to L (Scheduling if and where is not used) See 6.55.8 for detail. Set to H (GPRS Indicator is used)

RA COLOUR

SI13 POSITION

3G Early Classmark Sending Restriction SI 2quater indicator

See 6.55.8 for detail.

Set to L, see 6.55.8 for detail. Set to L : SI 2quater message is not broadcast

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 3 3BK 11203 0138 DSZZA 473/639

Case 4 SI 3 Rest Octets detail description (with Optional Selection Parameters, with GPRS Indicator, with presence of SI2 QUARTER). Information elements CBQ Length (bit) 1 6 1 3 Coding rules See 6.55.8 for detail. Set to H (Selection Parameters are used)

CELL_RESELECT_OFFSET

TEMPORARY_OFFSET PENALTY_TIME

See 6.55.8 for detail.

System Information 2ter Indicator

1 1 1 1 1 1

See 6.55.8 for detail. See 6.55.8 for detail.

Set to L (Optional Power offset is not used)

See 6.55.8 for detail.

See 6.55.8 for detail.

Early Classmark Sending Control

Set to L (Scheduling if and where is not used) See 6.55.8 for detail. Set to H (GPRS Indicator is used)

RA COLOUR

SI13 POSITION

3G Early Classmark Sending Restriction SI 2quater indicator SI2quater_POSITION

See 6.55.8 for detail.

Set to L, see 6.55.8 for detail. Set to H if SI 2quater message is broadcast

- 0 : SYSTEM INFORMATION TYPE 2 quater message is sent on BCCH Norm. - 1 SYSTEM INFORMATION TYPE 2 quater message is sent on BCCH Ext.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 3 3BK 11203 0138 DSZZA 474/639

6.55.2 CELL IDENTITY TYPE: M DEFINITION Identification of the cells within a location area. BIT DESCRIPTION 8 7 6 Cell Identity value 5 4 3 2 1

CI value (continued) Coding scheme depends on administration SUB PARAMETER DEFINITION CI value, Cell Identity value See 3GPP TS 24.008.

PARAMETER ORIGIN - ACTION ON PARAMETER

6.55.3 LOCATION AREA IDENTIFICATION TYPE: M DEFINITION To provide unambiguous identification of Location Areas within the area covered by GSM system. 8 7 6 5 4 3 2 1

BIT DESCRIPTION

MNC Digit 3 (Note) MNC Digit 2 LAC

MCC Digit 2

MCC Digit 3

MCC Digit 1 MNC Digit 1

LAC (continued) Note 3 digits MNC is supported. Note that in case where only two digits MNC is used, the field MNC Digit 3 shall be filled in with 1111.

SUB PARAMETER DEFINITION MCC Mobile Country Code (See CCITT. E.212) MNC Mobile Network Code (BCD) LAC Location Area Code See 3GPP TS 24.008 (Coding scheme chosen by adm). PARAMETER ORIGIN - ACTION ON PARAMETER All these parameters will be given to BSC during the Configuration. LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 3 3BK 11203 0138 DSZZA 475/639

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

6.55.4 CONTROL CHANNEL DESCRIPTION TYPE: M DEFINITION To provide a variety of information about a cell BIT DESCRIPTION MSCR 0 Spare 8 ATT 0 CBQ3 7 6 0 BS-AG-BLKS-RES 0 5 4 3 CCCH-CONF BS-PA-MFRMS 2 1

0 spare T 3212 Timeout value

bit 8 of octet 1 and bits 4, 5, 6, 7, 8 of octet 2 are spare. SUB PARAMETER DEFINITION MSCR, MSC Release. Set by O&M according to the MSC Release. Bit 8 0 MSC is Release '98 or older 1 MSC is Release '99 onwards

ATT, Attach-detach allowed. Set by O&M according to MSC and VLR options.

Bit 7 0 MSs in the cell are not allowed to apply IMSI attach and detach procedure. 1 MSs in the cell shall apply IMSI attach and detach procedure.

BS-AG-BLKS-RES,

The BS-AG-BLKS-RES field is coded as the binary representation of the number of blocks reserved for access grant. Range 0 to 2 if CCCH-CONF = "001" 0 to 7 for other values of CCCH-CONF

CCCH-CONF Bits 321 0 0 0 1 basic physical channel used for CCCH, not combined with SDCCHs 0 0 1 1 basic physical channel used for CCCH, combined with SDCCHs 0 1 0 2 basic physical channel used for CCCH, not combined with SDCCHs 1 0 0 3 basic physical channel used for CCCH, not combined with SDCCHs 1 1 0 4 basic physical channels used for CCCH, not combined with SDCCHs All other values are reserved CBQ3, Cell Bar Qualify 3. Always set to 00 Bits 76 00 Iu mode not supported 01 Iu mode capable MSs barred 10 Iu mode supported, cell not barred 11 Iu mode supported, cell not barred. The network shall not use this value. LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 3 3BK 11203 0138 DSZZA 476/639

All other values are reserved in the first case

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

BS-PA-MFRMS Bits 321 0 0 0 2 multiframes period paging subgroup 0 0 1 3 multiframes period paging subgroup 0 1 0 4 multiframes period paging subgroup ... 1 1 1 9 multiframes period paging subgroup

for transmission of PAGING REQUEST messages to the same for transmission of PAGING REQUEST messages to the same for transmission of PAGING REQUEST messages to the same for transmission of PAGING REQUEST messages to the same

Note: The number of different paging subchannels on the CCCH is:

(3 - BS-AG-BLKS-RES) * BS-PA-MFRMS, if CCCH-CONF = "001" (9 - BS-AG-BLKS-RES) * BS-PA-MFRMS, for other values of CCCH-CONF

T3212 timeout value

The T3212 timeout value field is coded as the binary representation of the timeout value for periodic updating in decihours. Range: 1 to 255 The value 0 is used for infinite timeout value

i.e. periodic updating shall not be used within the cell. PARAMETER ORIGIN - ACTION ON PARAMETER All these sub-parameters are set by O & M and stored in BSC and may change according to OMC action.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 3 3BK 11203 0138 DSZZA 477/639

6.55.5 CELL OPTIONS (BCCH) TYPE: M DEFINITION To provide a variety of information about a cell. BIT DESCRIPTION 8 0 PWRC 7 6 DTX 5 4 Radio-Link-Timeout 3 2 1

SUB PARAMETER DEFINITION PWRC DTX : 0 1 : Power control indicator MS shall include measurement on the BCCH carrier. PWRC is not set MS shall not include measurement on the BCCH carrier. PWRC is set

Radio-Link-Timeout 0000: 0001: 0010: .. .. .. 1110: 1111:

value value value

DTX indicator 00 MS may use discontinuous transmission 01 MS shall use discontinuous transmission 10 MS shall not use discontinuous transmission

4 SACCH blocks 8 SACCH blocks 12 SACCH blocks

PARAMETER ORIGIN - ACTION ON PARAMETER Information known by BSC (via O&M operation) and send to MS on BCCH.

See 3GPP TS. 05.08

60 SACCH blocks 64 SACCH blocks

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 3 3BK 11203 0138 DSZZA 478/639

6.55.6 CELL SELECTION PARAMETERS TYPE: M DEFINITION To provide a variety of information about a cell. BIT DESCRIPTION CELL RESELECT HYSTERESIS ACS NECI SUB PARAMETER DEFINITION CELL RESELECT HYSTERESIS Bits 876 0 0 0 0 dB RXLEV hysteresis for LA re-selection 0 0 1 2 dB RXLEV hysteresis for LA re-selection 0 1 0 4 dB RXLEV hysteresis for LA re-selection 0 1 1 6 dB RXLEV hysteresis for LA re-selection 1 0 0 8 dB RXLEV hysteresis for LA re-selection 1 0 1 10 dB RXLEV hysteresis for LA re-selection 1 1 0 12 dB RXLEV hysteresis for LA re-selection 1 1 1 14 dB RXLEV hysteresis for LA re-selection MS-TXPWR-MAX-CCH: binary representation of the maximum power control level an MS may use when accessing on a CCH GSM 900 coding: range 0 to 19; step size = 2 dBm; 0: 43 dBm, ..., 15: 13 dBm, 19: 5 dBm, see 6.2.4 and 6.26.6 for detail. DCS 1800 coding: range 0 to 15; step size = 2 dBm; 0: 30 dBm, ..., 13: 4dBm, 15: 0 dBm, see 6.2.4 and 6.26.6 for detail. 8 7 6 5 MS-TXPWR-MAX-CCH RXLEV-ACCESS-MIN 4 3 2 1

RXLEV-ACCESS-MIN : binary representation of the minimum received signal level at the MS for which it is permitted to access the system (value 0 to 63 - 3GPP TS. 05.08) ACS Additional reselection parameter indication. 0 System information type 16 and 17 are not broadcast on the BCCH. 1 System information type 16 and 17 are broadcast on the BCCH. NECI 0 1 New establishment causes are not supported New establishment causes are supported

DCS 1900 coding: range 0 to 15, 30, 31; 30: 33 dBm, 31: 32 dBm, 0: 30 dBm, 1: 28 dBm, ..., 14: 2dBm, 15: 0 dBm, see 6.2.4 and 6.26.6 for detail.

Not supported

PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 3 3BK 11203 0138 DSZZA 479/639

6.55.7 RACH CONTROL PARAMETER TYPE: M DEFINITION To provide parameters used to control the RACH utilisation. BIT DESCRIPTION 8 Max Retrans 7 6 5 TX-Integer 4 3 Cell Bar Acces AC C09 AC C01 2 RE AC C08 AC C00 1

AC C15 AC C07

AC C14 AC C06

AC C13 AC C05

AC C12 AC C04

AC C11 AC C03

EC C10 AC C02

SUB PARAMETER DEFINITION Max Retrans 00 01 10 11 1 re transmission 2 re transmissions 4 re transmissions 7 re transmissions

TX Integer Bits 6 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1

5 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1

Number of time slots to spread transmission 4 3 0 0 3 slots used to spread transmission 0 1 4 slots used to spread transmission 1 0 5 slots used to spread transmission 1 1 6 slots used to spread transmission 0 0 7 slots used to spread transmission 0 1 8 slots used to spread transmission 1 0 9 slots used to spread transmission 1 1 10 slots used to spread transmission 0 0 11 slots used to spread transmission 0 1 12 slots used to spread transmission 1 0 14 slots used to spread transmission 1 1 16 slots used to spread transmission 0 0 20 slots used to spread transmission 0 1 25 slots used to spread transmission 1 0 32 slots used to spread transmission 1 1 50 slots used to spread transmission

Cell Bar Access: Cell barred for access 0: the cell is not barred. 1: the cell is barred. RE Call Re-establishment allowed 0: Re-establishment allowed in the cell 1: Re-establishment not allowed in the cell EC Emergency Call allowed (Octet 2 bit 3) 0: Emergency Call allowed in the cell to all MSs 1: Emergency Call not allowed in the cell except for the MSs that belong to one of the classes between 11 to 15 ED EVOLIUM 05 RELEASED LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 3 3BK 11203 0138 DSZZA 480/639

0138_05.doc 15/02/2008

AC CN : Access Control Class N (octet 2 except bit 3) and octet 3. For a mobile station with AC CN, access is not barred if the AC CN bit is coded with "0" ; N = 0,1..9,11..15. PARAMETER ORIGIN - ACTION ON PARAMETER All the parameters are given to BSC during configuration and may be changed with OMC requests or by BSC due to "Overload" or "Reset" actions.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 3 3BK 11203 0138 DSZZA 481/639

6.55.8 SI 3 REST OCTETS TYPE: M DEFINITION This IE provides parameters used by the mobile for cell reselection purposes. It also indicates whether GPRS service is supported in the cell. BIT DESCRIPTION <SI3 Rest Octet> ::= <Optional selection parameters> <Optional Power offset> <System Information 2ter Indicator> <Early Classmark Sending Control> <Scheduling if and where> {L | H <GPRS Indicator> } <3G Early Classmark Sending Restriction> {L | H < SI2quater Indicator : < SI2quater Indicator struct > > } <Iu Indicator> -- Conditional <spare padding> ; <Optional Selection Parameters> ::= L | H <Selection Parameters>; <Selection Parameters> ::= <CBQ: bit (1)> <CELL_RESELECT_OFFSET: bit (6)> <TEMPORARY_OFFSET: bit (3)> <PENALTY_TIME: bit (5)>; <Optional Power Offset> ::= L | H <Power Offset: bit (2)>; <System Information 2ter Indicator> ::= L | H; <Early Classmark Sending Control> ::= L | H; <Scheduling if and where>::= L | H <WHERE: bit (3)>; <GPRS Indicator> ::= < RA COLOUR : bit (3) > < SI13 POSITION : bit >; <3G Early Classmark Sending Restriction>::= L | H; < SI2quater Indicator struct > ::= L | H < SI2quater_POSITION : bit > ; <Iu Indicator> ::= <SI13alt POSITION: bit >;

Note: lu indicator is not supported by Alcatel BSS. SUB PARAMETER DEFINITION POWER OFFSET 2TI ECSC : Set by O&M. : Not supported ( POI set to "L" ).

WHERE

: Early Sending is explicitly accepted ( always set to "H" ).

PI, CELL_RESELECT_PARAM_IND

: the WHERE field is not contained, as SYSTEM INFORMATION 9 is not broadcast.

PI is used by the mobile station to determine if the C2 parameters which are, CBQ, CELL_RESELECT_OFFSET, TEMPORARY_OFFSET and PENALTY_TIME are being broadcast by the network in this message. CBQ, CELL_BAR_QUALIFY CELL_BAR_QUALIFY is used by the network to control mobile station cell selection and reselection. The use and coding of this parameter is defined in 3GPP TS 45.008. 05 RELEASED

0: C2 parameters not present. 1: C2 parameters are present.

ED EVOLIUM

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 3 3BK 11203 0138 DSZZA 482/639

CELL_RESELECT_OFFSET

CELL_RESELECT_OFFSET is coded as the binary representation of the "CELL_RESELECT_OFFSET" in 3GPP TS 05.08. It is a value used by the mobile station to apply a positive or negative offset to the value of C2 as defined in 3GPP TS 03.22 and 3GPP TS 05.08. The TEMPORARY_OFFSET field is coded as the binary representation of the "TEMPORARY_OFFSET" in 3GPP TS 05.08. It is used by the mobile station as part of its calculation of C2 for the cell reselection process as described in 3GPP TS 05.08. It is used to apply a negative offset to C2 for the duration of PENALTY_TIME.

TEMPORARY_OFFSET

PENALTY_TIME

The PENALTY_TIME is coded as the binary representation of the "PENALTY_TIME" in 3GPP TS 05.08. It defines the length of time for which TEMPORARY_OFFSET is active. The usage of PENALTY_TIME is described in 3GPP TS 03.22 and 3GPP TS 05.08.

GPRS Indicator

The GPRS Indicator contains RA Colour and SI13_Position fields. If the GPRS Indicator is contained in the SI 3 REST OCTETS, it indicates that GPRS is supported in the cell: RA Colour : Routing area color of the cell set by O&M SI13_Position : 0 SYSTEM INFORMATION TYPE 13 message is sent on BCCH Norm 1 SYSTEM INFORMATION TYPE 13 message is sent on BCCH Ext

3G ECSR 3G Early Classmark Sending Restriction L Neither UTRAN, CDMA 2000 nor GERAN IU MODE classmark change message shall be sent with the Early classmark sending. H The sending of UTRAN, CDMA2000 and GERAN IU MODE CLASSMARK CHANGE messages are controlled by the Early Classmark Sending Control parameter. Set to High if EN_3G_HO is set to enable; Set to Low otherwise. SI2quater Indicator The SI2quater Indicator contains the SI2quater_Position field. If this indicator is contained, it indicates that the SI2quater message is broadcast. SI2quater_Position 0 SYSTEM INFORMATION TYPE 2 quater message is sent on BCCH Norm 1 SYSTEM INFORMATION TYPE 2 quater message is sent on BCCH Ext.

PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 3 3BK 11203 0138 DSZZA 483/639

6.56 SYSTEM INFORMATION TYPE 4


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO BCCH 44.018

SYSTEM INFORMATION TYPE 4 ABIS A

This message is sent on the BCCH by the network giving information on control of the RACH, the location area identification, the cell identity and various other information about the cell. From: BSC INFORMATION ELEMENT NAME To: MS TYPE MV MV MV MV O TV C TLV MV COMMENT LENGTH (byte) 1 2 5 2 3 4 3-6 0-10 23 TIMER

DIRECTION

INFORMATION ELEMENT LIST

L2 Pseudo Length Header Location area ID. Cell Selection Parameters. RACH Control Parameters CBCH channel description CBCH Mobile allocation SI 4 Rest Octets

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. BSS Initialisation of the telecom part System Information Management (ref. [19]) (ref. [24]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 4 3BK 11203 0138 DSZZA 484/639

6.56.1 GENERAL DESCRIPTION 8 L2 Pseudo Length 0 0 Location Area Identification 7 6 5 0 1 4 0 1 3 2 0 1 1 1 0 MCC Digit 1 MCC Digit 3 MNC Digit 1 1 1 0 0

L2 Pseudo Length Value 0 0 0 0 MCC Digit 2 MNC Digit 3 (Note) MNC Digit 2

LAC LAC (continued)

Cell selection Parameters

CELL RESELECT HYSTERESIS ACS NECI Max Retrans AC C15 AC C7 0 AC C14 AC C6 1 TSC AC C13 AC C5 1

MS-TXPWR-MAX-CCH RXLEV-ACCESS-MIN TX-Integer Cell Bar Acces AC AC AC EC C12 C11 C9 AC AC AC AC C4 C3 C2 C1 0 0 1 0 H=1-> H=0-> TN RE AC C8 AC C0 0

RACH Control Parameters

CBCH Channel Description (optional)

Channel type and TDMA offset MAIO low part 0 1 MA C 8n-1

CBCH Mobile Allocation (conditional)

MA C 8n MA C 8

MAIO (high part) spare ARFCN (Hpart) HSN A R F C N (low part) 1 1 0 0 1 0 Length of mobile alloc. contents 2 MA C 8n-7 : : MA C 1

SI 4 Rest Octets Note

See the tables below for the detail

3 digits MNC is supported. Note that in case where only two digits MNC is used, the field MNC Digit 3 shall be filled in with 1111.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 4 3BK 11203 0138 DSZZA 485/639

Case 0 SI 4 Rest Octets detail description (without Optional Selection Parameters and GPRS is disable: Information elements Length (bit) 1 1 1 1 1 Coding rules Set to L (Selection Parameters are not used) Set to L (Optional Power offset is not used) Set to L (GPRS Indicator is not used) Set to L (Break indicator is used) Set to L or H (Break indicator)

Case 1 SI 4 Rest Octets detail description (without Optional Selection Parameters and GPRS is enable: Information elements Length (bit) 1 1 RA COLOUR 1 1 3 Coding rules Set to L (Selection Parameters are not used) Set to L (Optional Power offset is not used) See 6.56.7 for detail. Set to H (GPRS Indicator is used)

SI13 POSITION

1 1

See 6.56.7 for detail.

Set to L (Break indicator is used) Set to L or H (Break indicator)

Case 2 SI 4 Rest Octets detail description (with Optional Selection Parameters and GPRS is disable: Information elements CBQ Length (bit) 1 6 1 3 Coding rules See 6.56.7 for detail. Set to H (Selection Parameters are used)

CELL_RESELECT_OFFSET

TEMPORARY_OFFSET PENALTY_TIME

See 6.56.7 for detail.

1 1 1 1

Set to L (Optional Power offset is not used) Set to L (GPRS Indicator is not used) Set to L (Break indicator is used) Set to L or H (Break indicator)

See 6.56.7 for detail.

See 6.56.7 for detail.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 4 3BK 11203 0138 DSZZA 486/639

Case 3 SI 4 Rest Octets detail description (with Optional Selection Parameters and GPRS is enable: Information elements CBQ Length (bit) 1 6 1 3 Coding rules See 6.56.7 for detail. Set to H (Selection Parameters are used)

CELL_RESELECT_OFFSET

TEMPORARY_OFFSET PENALTY_TIME

See 6.56.7 for detail.

1 1 1

Set to L (Optional Power offset is not used) See 6.56.7 for detail. Set to H (GPRS Indicator is used)

See 6.56.7 for detail.

See 6.56.7 for detail.

RA COLOUR

SI13 POSITION

1 1

See 6.56.7 for detail.

Set to L (Break indicator is used) Set to L or H (Break indicator)

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 4 3BK 11203 0138 DSZZA 487/639

6.56.2 LOCATION AREA IDENTIFICATION TYPE: M DEFINITION To provide unambiguous identification of Location Areas within the area covered by GSM system. BIT DESCRIPTION 8 7 6 5 4 3 2 1

MNC Digit 3 (Note) MNC Digit 2 LAC

MCC Digit 2

MCC Digit 3

MCC Digit 1 MNC Digit 1

LAC (continued) Note 3 digits MNC is supported. Note that in case where only two digits MNC is used, the field MNC Digit 3 shall be filled in with 1111.

SUB PARAMETER DEFINITION MCC Mobile Country Code (See CCITT. E.212) MNC Mobile Network Code (BCD) LAC Location Area Code (Coding schema chosen by adm) LAC, Location area code See 3GPP TS 24.008. PARAMETER ORIGIN - ACTION ON PARAMETER All these parameters will be given to BSC during the Configuration.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 4 3BK 11203 0138 DSZZA 488/639

6.56.3 CELL SELECTION PARAMETERS TYPE: M DEFINITION To provide a variety of information about a cell. BIT DESCRIPTION CELL RESELECT HYSTERESIS ACS NECI SUB PARAMETER DEFINITION CELL RESELECT HYSTERESIS Bits 8 7 6 0 0 0 0 dB RXLEV hysteresis for LA re-selection 0 0 1 2 dB RXLEV hysteresis for LA re-selection 0 1 0 4 dB RXLEV hysteresis for LA re-selection 0 1 1 6 dB RXLEV hysteresis for LA re-selection 1 0 0 8 dB RXLEV hysteresis for LA re-selection 1 0 1 10 dB RXLEV hysteresis for LA re-selection 1 1 0 12 dB RXLEV hysteresis for LA re-selection 1 1 1 14 dB RXLEV hysteresis for LA re-selection MS-TXPWR-MAX-CCH : binary representation of the maximum power control level an MS may use when accessing on a CCH Range: 0-31 0-15 Supported 16-31 Not supported RXLEV-ACCESS-MIN : binary representation of the minimum received signal level at the MS for which it is permitted to access the system (value 0 to 63 - 3GPP TS 05.08) ACS Additional reselection parameter indication 0 The SI 4 Rest octets, if present; shall be used to derive the value of PI and possibily C2 parameters. 1 The value of PI and possibly C2 parameters in a System Information type 7 or type 8 message shall be used. NECI 0 1 New establishment causes are not supported New establishment causes are supported 8 7 6 5 MS-TXPWR-MAX-CCH RXLEV-ACCESS-MIN 4 3 2 1

Not supported

Not supported

PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 4 3BK 11203 0138 DSZZA 489/639

6.56.4 RACH CONTROL PARAMETER TYPE: M DEFINITION To provide parameters used to control the RACH utilisation. BIT DESCRIPTION 8 Max Retrans 7 6 5 TX-Integer 4 3 Cell Bar Acces AC C09 AC C01 2 RE AC C08 AC C00 1

AC C15 AC C07

AC C14 AC C06

AC C13 AC C05

AC C12 AC C04

AC C11 AC C03

EC C10 AC C02

SUB PARAMETER DEFINITION Max Retrans 00 01 10 11 1 re transmission 2 re transmissions 4 re transmissions 7 re transmissions

TX Integer Bits 6 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1

5 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1

Number of time slots to spread transmission 4 3 0 0 3 slots used to spread transmission 0 1 4 slots used to spread transmission 1 0 5 slots used to spread transmission 1 1 6 slots used to spread transmission 0 0 7 slots used to spread transmission 0 1 8 slots used to spread transmission 1 0 9 slots used to spread transmission 1 1 10 slots used to spread transmission 0 0 11 slots used to spread transmission 0 1 12 slots used to spread transmission 1 0 14 slots used to spread transmission 1 1 16 slots used to spread transmission 0 0 20 slots used to spread transmission 0 1 25 slots used to spread transmission 1 0 32 slots used to spread transmission 1 1 50 slots used to spread transmission

Cell Bar Access: Cell barred for access 0: the cell is not barred. 1: the cell is barred. RE Call Re-establishment allowed 0: Re-establishment allowed in the cell 1: Re-establishment not allowed in the cell

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 4 3BK 11203 0138 DSZZA 490/639

EC Emergency Call allowed (Octet 2 bit 3) 0: Emergency Call allowed in the cell to all MSs

1: Emergency Call not allowed in the cell except for the MSs that belong to one of the classes between 11 to 15

AC CN : Access Control Class N (octet 2 except bit 3) and octet 3. For a mobile station with AC CN, access is not barred if the AC CN bit is coded with "0" ; N = 0,1..9,11..15. PARAMETER ORIGIN - ACTION ON PARAMETER All the parameters are given to BSC during configuration and may be changed with OMC requests or by BSC due to "Overload" or "Reset" actions.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 4 3BK 11203 0138 DSZZA 491/639

6.56.5 CBCH CHANNEL DESCRIPTION TYPE: O DEFINITION To provide a description of where to find the CBCH BIT DESCRIPTION 8 0 7 1 6 1 5 0 4 0 3 1 2 TN 0 1 0 1

Channel type and TDMA offset TSC H=1-> H=0->

MAIO (high part) ARFCN (Hpart)

MAIO low part SUB PARAMETER DEFINITION Octet 2 Channel type and TDMA offset. Bit 8 7 6 5 4 0 0 1 1 0 0 1 0 1 0

spare HSN A R F C N (low part)

SDCCH/4 + SACCH/C4 or CBCH (SDCCH/4) SDCCH/8 + SACCH/C8 or CBCH (SDCCH/8)

(For CBCH sub channel 2 is used). TN : Time slot (0 to 7) Octets 3 and 4: TSC : Training Sequence Code (0 to 7) H : "0" Single RF channel "1" RF hopping channel

Channel selector: H = "0": The channel selector field consists of the absolute RF channel number. Bits 4 3 0 0 spare ARFCN: Octet 3 Octet 4 Bits 2,1 High part of ARFCN Bits 8 to 1 ARFCN low part

The ARFCN is coded as the binary representation of the absolute RF channel Number. Range 0 to 1023.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 4 3BK 11203 0138 DSZZA 492/639

H = "1":

The channel selector field consists of the mobile allocation index offset, MAIO, and the hopping sequence number, HSN. Bits 4 to 1 High part Bits 8 to 7 Low part

MAIO: Octet 3 Octet 4

HSN (Octet 4, Bits 1 to 6): Value 0 to 63. The HSN field is coded as the binary representation of the hopping sequence number. PARAMETER ORIGIN - ACTION ON PARAMETER This parameter is transparent for the BTS when received. At the BSC site, the BSC has to provide the following information Channel type and TDMA offset and TN depends of the resource to be allocated by the resource manager. H: fixed value according if hopping is used or not (this information has to be provided by O&M). Channel selector.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 4 3BK 11203 0138 DSZZA 493/639

6.56.6 CBCH MOBILE ALLOCATION TYPE: C DEFINITION If the CBCH channel description indicates frequency hopping, then this IE is always present. BIT DESCRIPTION 8 0 7 1 6 1 5 1 0 4 3 0 2 1 0 1

MA C 8n MA C 8

MA C 8n-1

Length of mobile alloc. contents 2

MA C 8n-7 MA C 1

SUB PARAMETER DEFINITION MA length depends on the relative frequency span of the frequencies in the cell allocation frequency list. MA Ci: Mobile Allocation RF channel i - the RF channels represented in the MA Ci bit fields are those which in the cell channel description information element are coded with "1" in the CA ARFCN N bit fields. MA Ci = CA ARFCN N(i) i = 1,2...NF (NF = Number of Frequencies in the CA frequency list). For a RF channel belonging to the Mobile Allocation the MA Ci bit is coded with a "1", for a RF channel not belonging to the Mobile Allocation, the MA C bit is coded with a "0". PARAMETER ORIGIN - ACTION ON PARAMETER The parameter is transparent for the BTS when received from the BSC. Note: Conditional message, if Frequency Hopping system is used, then IE is present else not.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 4 3BK 11203 0138 DSZZA 494/639

6.56.7 SI 4 REST OCTETS TYPE M DEFINITION This IE provides parameters used by the mobile for cell reselection purposes. BIT DESCRIPTION <SI4 Rest Octet> ::= <SI4 Rest Octets_O> {L <Break indicator> | H <SI4 Rest Octets_S>} <SI4 Rest Octets_O> ::= {<Optional selection parameters> <Optional Power offset> {L | H < GPRS Indicator >} ; <Break Indicator> : := L|H; <Optional Selection Parameters> ::= L | H <Selection Parameters>; <Selection Parameters> ::= <CBQ: bit (1)> <CELL_RESELECT_OFFSET: bit (6)> <TEMPORARY_OFFSET: bit (3)> <PENALTY_TIME: bit (5)>; <Optional Power Offset> ::= L | H <Power Offset: bit (2)>; <GPRS Indicator> ::= < RA COLOUR : bit (3) > < SI13 POSITION : bit >;

SUB PARAMETER DEFINITION IEI value is not defined in GSM phase 2 (never used on the Radio interface). POWER OFFSET : Not supported ( POI set to "L" ). SI4 Rest Octets_S Break Indicator : Not included (no LSA parameter in SI 4; Break Indicator field is always included).

PI, CELL_RESELECT_PARAM_IND

0: Additional parameters are not sent in SI 7 and SI 8. 1: Additional parameters (i.e. SI4 Rest Octet_S) are sent in SI 7 and SI 8. 0: C2 parameters not present. 1: C2 parameters are present.

CBQ, CELL_BAR_QUALIFY

PI is used by the mobile station to determine if the C2 parameters which are, CBQ, CELL_RESELECT_OFFSET, TEMPORARY_OFFSET and PENALTY_TIME are being broadcast by the network in this message.

CELL_RESELECT_OFFSET

CELL_BAR_QUALIFY is used by the network to control mobile station cell selection and reselection. The use and coding of this parameter is defined in 3GPP TS 45.008.

CELL_RESELECT_OFFSET is coded as the binary representation of the "CELL_RESELECT_OFFSET" in 3GPP TS 05.08. It is a value used by the mobile station to apply a positive or negative offset to the value of C2 as defined in 3GPP TS 03.22 and 3GPP TS 05.08. LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 4 3BK 11203 0138 DSZZA 495/639

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

TEMPORARY_OFFSET

PENALTY_TIME

The TEMPORARY_OFFSET field is coded as the binary representation of the "TEMPORARY_OFFSET" in 3GPP TS 05.08. It is used by the mobile station as part of its calculation of C2 for the cell reselection process as described in 3GPP TS 05.08. It is used to apply a negative offset to C2 for the duration of PENALTY_TIME. The PENALTY_TIME is coded as the binary representation of the "PENALTY_TIME" in 3GPP TS 05.08. It defines the length of time for which TEMPORARY_OFFSET is active. The usage of PENALTY_TIME is described in 3GPP TS 03.22 and 3GPP TS 05.08.

GPRS Indicator: The GPRS Indicator contains RA Colour and SI13_Position fields. If the GPRS Indicator is contained in the SI 4 REST OCTETS, it indicates that GPRS is supported in the cell: RA Colour : Routing area color of the cell set by O&M SI13_Position : 0 1

SYSTEM INFORMATION TYPE 13 message is sent on BCCH Norm SYSTEM INFORMATION TYPE 13 message is sent on BCCH Ext

PARAMETER ORIGIN - ACTION ON PARAMETER The CBQ and RACH control parameters are given to the BSC during configuration and may be changed with OMC requests and may be modified by the BSC during "Overload" or "Reset" actions.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 4 3BK 11203 0138 DSZZA 496/639

6.57 SYSTEM INFORMATION TYPE 5


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO SACCH 44.018

SYSTEM INFORMATION TYPE 5 ABIS A

This message is sent on the SACCH by the network to stations within the cell giving information on the BCCH allocation in the neighbour cells. From: BTS INFORMATION ELEMENT NAME To: MS TYPE COMMENT LENGTH (byte) 2 16 18 TIMER

DIRECTION

INFORMATION ELEMENT LIST

Header BCCH Frequency List(Note)

MV

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. BSS Initialisation of the telecom part (ref. [19]) ABNORMAL SITUATION

Note: In case of VGCS, if only SI5 is sent by the BSS; or if SI5bis is also sent by the BSS but the BCCH frequency of the serving cell is not included in SI5bis; then the BCCH Frequency List MIE shall include the BCCH frequency of the serving cell (see 3GPP TS 43.022, section 5.2.1).

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 5 3BK 11203 0138 DSZZA 497/639

6.57.1 GENERAL DESCRIPTION P-GSM 8 0 0 7 0 0 6 0 0 EXTIND 5 0 1 BA-IND 4 0 1 3 1 1 2 1 0 1 0 1

BCCH Frequency List

BA BA BA BA ARFCN ARFCN ARFCN ARFCN 124 123 122 121 BA BA BA BA BA BA BA BA ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN 120 119 118 117 116 115 114 113 ................ BA BA BA BA BA BA BA BA ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN 8 7 6 5 4 3 2 1

0 0 FORMAT-ID

E-GSM, GSM850, DCS1800, DCS1900 and Biband 8 0 0 7 0 0 6 0 0 EXTIND 5 0 1 BA-IND 4 0 1 3 1 1 2 1 0 1 0 1

BCCH Frequency List

ORIGFORMAT-ID ARFCN (continued) Note high ORIG-ARFCN (middle part) ORIG- RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN ARFCN 1 2 3 4 5 6 7 (low) : : RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN 104 105 106 107 108 109 110 111

1 0 FORMAT-ID

Note: 0 x x: Range 1024 format; 1 0 0: Range 512 format; 1 0 1: Range 256 format; 1 1 0: Range 128 format; 1 1 1: Variable bit map.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 5 3BK 11203 0138 DSZZA 498/639

6.57.2 BCCH FREQUENCY LIST / NEIGHBOUR CELLS DESCRIPTION TYPE: M DEFINITION To provide the absolute radio frequency channel numbers of the BCCH carriers to be monitored by the MS in the cell. Used in this case for handover purposes. BIT DESCRIPTION

Bitmap 0 Format 8

supported for P-GSM. 7 EXTIND 6 BA-IND 5 4 3 2 1 1 2

BA BA BA BA ARFCN ARFCN ARFCN ARFCN 124 123 122 121 BA BA BA BA BA BA BA BA ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN 120 119 118 117 116 115 114 113 ................ BA BA BA BA BA BA BA BA ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN 008 007 006 005 004 003 002 001

0 0 FORMAT-ID

16

SUB PARAMETER DEFINITION FORMAT-ID : Format identifier.

EXT-IND : Extension Indication 0 IE carries the complete BA 1 IE carries a part of the BA BA-IND : BCCH allocation sequence number indication Range 0 to 1. BA ARFCN N : BCCH Allocation Absolute RF Channel Number N - if ARFCN = N belongs to the BCCH allocation, BA ARFCN N bit is coded with "1" N = 1,2 ... 124 - if not BA ARFCN N bit is coded with "0" ; N=1,2 ...124 (Note: the number of neighbour BCCH frequencies is limited to 32)

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 5 3BK 11203 0138 DSZZA 499/639

Range 1024 format 8

supported 7 EXTIND 6 BA-IND 5 4 0 F0 3 W(1) (high part) 2 1 1 3 2

1 0 FORMAT-ID

W(2) (low) W(3) (low part) W(4) (low part) W(5) (low part) W(6) (low part) W(8) (low) W(7) (low part)

W(2) (high part)

W(1) (low part)

FORM-ID

W(3) (high part) W(5) (high part) W(4) (high part) W(6) (high part) W(7) (high part) W(8) (high part) W(9)

4 6 5 7 8 9

10 W(11) (high) W(12) (high part) 11 12 13

W(10) W(12) (low part) W(11) (low part)

W(15) (low part)

W(14) (low part)

W(13) (low part)

W(15) (high part) W(16)

W(14) (high part)

W(13) (high part)

14

15

16

SUB PARAMETER DEFINITION FORMAT-ID : Format identifier.

EXT-IND : Extension Indication 0 IE carries the complete BA 1 IE carries a part of the BA BA-IND F0 : BCCH allocation sequence number indication Range 0 to 1. : Frequency indicator 0 ARFCN 0 is not a member of the set 1 ARFCN 0 is a member of the set : Each W(i) encodes a non negative integer in binary. if W(k) is null, W(K+1) to W(16) must be null also.

W(i)

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 5 3BK 11203 0138 DSZZA 500/639

Range 512 format 8

supported 7 EXT- BA-IND 1 0 FORMAT-ID (cont) IND ORIG-ARFCN (middle part) W(1) (high part) W(2) (high part) 6 5 4 3 2 0 ORIGARFCN 1 1 3 5 2 4

1 0 FORMAT-ID ORIGARFCN W(1) (low part) W(3) (low part) W(4) (low) W(2) (low)

W(4) (high part) W(5) W(6)

W(3) (high part)

6 W(7) (high) W(8) (high part)

7 8

W(9) (low part)

W(8) (low part)

W(7) (low part)

W(13) (low part)

W(12) (low part)

W(11)

W(10)

W(9) (high part)

10

W(16) (low part)

W(15)

W(14)

W(13) (high part)

W(12) (high)

11

13

12

W(17)

W(16) (high)

14

16

15

SUB PARAMETER DEFINITION FORMAT-ID : Format identifier.

EXT-IND : Extension Indication 0 IE carries the complete BA 1 IE carries a part of the BA BA-IND : BCCH allocation sequence number indication Range 0 to 1.

ORIG-ARFCN : This field encodes the ARFCN of one frequency belonging to the set. This value is also used as the origin of the bit map to generate all the other frequencies. W(i) : Each W(i) encodes a non negative integer in binary. if W(k) is null, W(K+1) to W(17) must be null also.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 5 3BK 11203 0138 DSZZA 501/639

Range 256 format 8

supported 7 EXT- BA-IND 1 0 FORMAT-ID (cont) IND ORIG-ARFCN (middle part) W(1) (high part) W(2) W(3) W(4) (low part) W(7) W(10) W(4) (high) W(5) (high part) W(8) (high) 6 5 4 3 2 1 ORIGARFCN 1 1 3 2 4 5 6 7

1 0 FORMAT-ID ORIGARFCN W(1) (loW)

W(6) (low)

W(5) (low part)

W(6) (high part)

W(9) (low) W(11) (low part) W(14) (low part)

W(8) (low part)

W(9) (high part) W(12) W(15) W(17) W(19) W(21)

W(11) (high)

10 12 11 13 14 15 16

W(13)

W(14) (high part)

W(16) (low part) W(18) (low part) W(20) (low part)

W(16) (high) W(18) (high) W(20) (high) 0 spare

SUB PARAMETER DEFINITION FORMAT-ID : Format identifier.

EXT-IND : Extension Indication 0 IE carries the complete BA 1 IE carries a part of the BA BA-IND : BCCH allocation sequence number indication Range 0 to 1. : This field encodes the ARFCN of one frequency belonging to the set. This value is also used as the origin of the bit map to generate all the other frequencies.

ORIG-ARFCN W(i)

: Each W(i) encodes a non negative integer in binary. if W(k) is null, W(K+1) to W(21) must be null also.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 5 3BK 11203 0138 DSZZA 502/639

Range 128 format 8

supported 7 EXT- BA-IND 1 1 FORMAT-ID (cont) IND ORIG-ARFCN (middle part) W(1) W(2) W(5) 6 5 4 3 2 1 ORIGARFCN 1 1 2 3 4

1 0 FORMAT-ID ORIGARFCN

W(4) (low) W(6) (low part) W(8)

W(3) (low part)

W(4) (high part) W(7)

W(3) (high part)

W(6) (high part)

6 7 8

W(9)

W(10) W(12) W(16) W(14) W(19) W(22) W(27) W(17)

W(11) W(13) W(15) W(20) W(18) (high)

10 11 12

W(18) (low) W(21) (low) W(26) (low)

W(24)

W(25)

W(23) W(28)

W(21) (high)

13 15 14 16

W(26) (high)

0 spare

SUB PARAMETER DEFINITION FORMAT-ID : Format identifier.

EXT-IND : Extension Indication 0 IE carries the complete BA 1 IE carries a part of the BA BA-IND : BCCH allocation sequence number indication Range 0 to 1. : This field encodes the ARFCN of one frequency belonging to the set. This value is also used as the origin of the bit map to generate all the other frequencies.

ORIG-ARFCN W(i)

: Each W(i) encodes a non negative integer in binary. if W(k) is null, W(K+1) to W(28) must be null also.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 5 3BK 11203 0138 DSZZA 503/639

Variable Bit Map format 1 0 FORMAT-ID 8 7

supported EXTIND 6 BA-IND 5 4 1 3 2 1 1 2

1 1 ORIGFORMAT-ID ARFCN (continued) high ORIG-ARFCN (middle part) ORIG- RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN ARFCN 1 2 3 4 5 6 7 (low) : : RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN 104 105 106 107 108 109 110 111 SUB PARAMETER DEFINITION FORMAT-ID : Format identifier.

16

EXT-IND : Extension Indication 0 IE carries the complete BA 1 IE carries a part of the BA BA-IND : BCCH allocation sequence number indication Range 0 to 1. : This field encodes the ARFCN of one frequency belonging to the set. This value is also used as the origin of the bit map to generate all the other frequencies.

ORIG-ARFCN

RRFCN N: Relative radio frequency channel number N - For an RF channel with ARFCN = ORIG-ARFCN + N) mod 1024 belonging to the set, then RRFCN N bit is coded as '1'. - For an RF channel with ARFCN = (ORIG-ARFCN + N) mod 1024 not belonging to the set, then RRFCN N bit is coded as '0'. (Note: the number of neighbour BCCH frequencies is limited to 32)

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 5 3BK 11203 0138 DSZZA 504/639

6.58 SYSTEM INFORMATION TYPE 5BIS


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO SACCH 44.018

SYSTEM INFORMATION TYPE 5BIS ABIS A

This message is sent on the SACCH by the network to stations within the cell giving information on the extension of the BCCH allocation in the neighbour cells. From: BTS INFORMATION ELEMENT NAME To: MS TYPE COMMENT LENGTH (byte) 2 16 18 TIMER

DIRECTION

INFORMATION ELEMENT LIST

Header MV Extension of the BCCH Frequency List MV (Note) IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION ABNORMAL SITUATION

FOLLOWING EVENT SPECIF DOC. REF. BSS Initialisation of the telecom part (ref. [19])

Note: In case of VGCS, and if BCCH frequency of the serving cell is not included in SI5, then the Extension of the BCCH Frequency List MIE of SI5bis shall include the BCCH frequency of the serving cell (see 3GPP TS 43.022, section 5.2.1).

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 5bis 3BK 11203 0138 DSZZA 505/639

6.58.1 GENERAL DESCRIPTION DCS1800, DCS1900, GSM850, E-GSM and Biband 8 0 0 7 0 0 6 0 0 EXTIND 5 0 0 BA-IND 4 0 0 3 1 1 2 1 0 1 0 1 ORIGARFCN high

1 0 FORMAT-ID BCCH Frequency List

FORMAT-ID (continued) Note

ORIG-ARFCN (middle part) ORIG- RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN ARFCN 1 2 3 4 5 6 7 (low) : : RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN 104 105 106 107 108 109 110 111

Note: 0 x x: Range 1024 format; 1 0 0: Range 512 format; 1 0 1: Range 256 format; 1 1 0: Range 128 format; 1 1 1: Variable bit map.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 5bis 3BK 11203 0138 DSZZA 506/639

6.58.2 EXTENSION OF THE BCCH FREQUENCY LIST / NEIGHBOUR CELLS DESCRIPTION TYPE: M DEFINITION To provide the absolute radio frequency channel numbers of the extension of the BCCH carriers to be monitored by the MS in the cell. Used in this case for handover purposes. BIT DESCRIPTION Range 1024 format 8 supported 7 EXTIND 6 BA-IND 5 4 0 F0 3 W(1) (high part) 2 1 1 3 2

1 0 FORMAT-ID

W(2) (low) W(3) (low part) W(4) (low part) W(5) (low part) W(6) (low part) W(8) (low) W(7) (low part)

W(2) (high part)

W(1) (low part)

FORM-ID

W(3) (high part) W(4) (high part) W(5) (high part) W(6) (high part) W(7) (high part) W(8) (high part) W(9)

4 6 5 7 8 9

10 W(11) (high) W(12) (high part) 11 12 13

W(10) W(12) (low part) W(11) (low part)

W(15) (low part)

W(14) (low part)

W(13) (low part)

W(15) (high part) W(16)

W(14) (high part)

W(13) (high part)

14

15

16

SUB PARAMETER DEFINITION FORMAT-ID : Format identifier.

EXT-IND : Extension Indication 0 IE carries the complete BA 1 IE carries a part of the BA BA-IND F0 : BCCH allocation sequence number indication Range 0 to 1. : Frequency indicator 0 ARFCN 0 is not a member of the set 05 RELEASED

ED EVOLIUM

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 5bis 3BK 11203 0138 DSZZA 507/639

1 W(i)

ARFCN 0 is a member of the set

: Each W(i) encodes a non negative integer in binary. if W(k) is null, W(K+1) to W(16) must be null also. supported 7 1 0 EXT- BA-IND FORMAT-ID (cont) IND ORIG-ARFCN (middle part) W(1) (high part) W(2) (high part) 6 5 4 3 2 0 ORIGARFCN 1 1 3 5 2 4

Range 512 format 8

1 0 FORMAT-ID ORIGARFCN W(1) (low part) W(3) (low part) W(4) (low) W(2) (low)

W(4) (high part) W(5) W(6)

W(3) (high part)

6 W(7) (high) W(8) (high part)

7 8

W(9) (low part)

W(8) (low part)

W(7) (low part)

W(13) (low part)

W(12) (low part)

W(11)

W(10)

W(9) (high part)

10

W(16) (low part) SUB PARAMETER DEFINITION FORMAT-ID : Format identifier.

W(15)

W(14)

W(13) (high part)

W(12) (high)

11

13

12

W(17)

W(16) (high)

14

16

15

EXT-IND : Extension Indication 0 IE carries the complete BA 1 IE carries a part of the BA BA-IND : BCCH allocation sequence number indication Range 0 to 1. : This field encodes the ARFCN of one frequency belonging to the set. This value is also used as the origin of the bit map to generate all the other frequencies.

ORIG-ARFCN W(i)

: Each W(i) encodes a non negative integer in binary. if W(k) is null, W(K+1) to W(17) must be null also.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 5bis 3BK 11203 0138 DSZZA 508/639

Range 256 format 8

supported 7 EXT- BA-IND 1 0 FORMAT-ID (cont) IND ORIG-ARFCN (middle part) W(1) (high part) W(2) W(3) W(4) (low part) W(7) W(10) W(4) (high) W(5) (high part) W(8) (high) 6 5 4 3 2 1 ORIGARFCN 1 1 3 2 4 5 6 7

1 0 FORMAT-ID ORIGARFCN W(1) (loW)

W(6) (low)

W(5) (low part)

W(6) (high part)

W(9) (low) W(11) (low part) W(14) (low part)

W(8) (low part)

W(9) (high part) W(12) W(15) W(17) W(19) W(21)

W(11) (high)

10 12 11 13 14 15 16

W(13)

W(14) (high part)

W(16) (low part) W(18) (low part) W(20) (low part)

W(16) (high) W(18) (high) W(20) (high) 0 spare

SUB PARAMETER DEFINITION FORMAT-ID : Format identifier.

EXT-IND : Extension Indication 0 IE carries the complete BA 1 IE carries a part of the BA BA-IND : BCCH allocation sequence number indication Range 0 to 1. : This field encodes the ARFCN of one frequency belonging to the set. This value is also used as the origin of the bit map to generate all the other frequencies.

ORIG-ARFCN W(i)

: Each W(i) encodes a non negative integer in binary. if W(k) is null, W(K+1) to W(21) must be null also.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 5bis 3BK 11203 0138 DSZZA 509/639

Range 128 format 8

supported 7 EXT- BA-IND 1 1 FORMAT-ID (cont) IND ORIG-ARFCN (middle part) W(1) W(2) W(5) 6 5 4 3 2 1 ORIGARFCN 1 1 2 3 4

1 0 FORMAT-ID ORIGARFCN

W(4) (low) W(6) (low part) W(8)

W(3) (low part)

W(4) (high part) W(7)

W(3) (high part)

W(6) (high part)

6 7 8

W(9)

W(10) W(12) W(16) W(14) W(19) W(22) W(27) W(17)

W(11) W(13) W(15) W(20) W(18) (high)

10 11 12

W(18) (low) W(21) (low) W(26) (low)

W(24)

W(25)

W(23) W(28)

W(21) (high)

13 15 14 16

W(26) (high)

0 spare

SUB PARAMETER DEFINITION FORMAT-ID : Format identifier.

EXT-IND : Extension Indication 0 IE carries the complete BA 1 IE carries a part of the BA BA-IND : BCCH allocation sequence number indication Range 0 to 1. : This field encodes the ARFCN of one frequency belonging to the set. This value is also used as the origin of the bit map to generate all the other frequencies.

ORIG-ARFCN W(i)

: Each W(i) encodes a non negative integer in binary. if W(k) is null, W(K+1) to W(28) must be null also. supported

Variable Bit Map format

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 5bis 3BK 11203 0138 DSZZA 510/639

1 1 ORIGFORMAT-ID ARFCN (continued) high ORIG-ARFCN (middle part) ORIG- RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN ARFCN 1 2 3 4 5 6 7 (low) : : RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN 104 105 106 107 108 109 110 111 SUB PARAMETER DEFINITION FORMAT-ID : Format identifier.

1 0 FORMAT-ID

EXTIND

BA-IND

1 2

16

EXT-IND : Extension Indication 0 IE carries the complete BA 1 IE carries a part of the BA BA-IND : BCCH allocation sequence number indication Range 0 to 1. : This field encodes the ARFCN of one frequency belonging to the set. This value is also used as the origin of the bit map to generate all the other frequencies.

ORIG-ARFCN

RRFCN N: Relative radio frequency channel number N - For an RF channel with ARFCN = ORIG-ARFCN + N) mod 1024 belonging to the set, then RRFCN N bit is coded as '1'. - For an RF channel with ARFCN = (ORIG-ARFCN + N) mod 1024 not belonging to the set, then RRFCN N bit is coded as '0'. (Note: the number of neighbour BCCH frequencies is limited to 32)

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 5bis 3BK 11203 0138 DSZZA 511/639

6.59 SYSTEM INFORMATION TYPE 5TER


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO SACCH 44.018

SYSTEM INFORMATION TYPE 5TER ABIS A

This message is sent optionally on the SACCH by the network to stations within the cell giving information on the extension of the BCCH allocation in the neighbour cells. From: BTS INFORMATION ELEMENT NAME To: MS TYPE MV MV COMMENT LENGTH (byte) 2 16 18 TIMER

DIRECTION

INFORMATION ELEMENT LIST

Header Extended BCCH Frequency List

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. BSS Initialisation of the telecom part (ref. [19]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 5ter 3BK 11203 0138 DSZZA 512/639

6.59.1 GENERAL DESCRIPTION P-GSM 8 0 0


FORMAT-ID

7 0 0

6 0 0

5 0 0 BA-IND

4 0 0

3 1 1

2 1 1

1 0 0

BCCH Frequency List

BA BA BA BA ARFCN ARFCN ARFCN ARFCN 124 123 122 121 BA BA BA BA BA BA BA BA ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN 120 119 118 117 116 115 114 113 ................ Multiband reporting BA BA BA BA BA BA BA BA ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN 8 7 6 5 4 3 2 1

E-GSM, DCS 1800, DCS1900, GSM850 and Biband 8 0 0


FORMAT-ID

7 0 0

6 0 0

5 0 0 BA-IND

4 0 0

3 1 1

2 1 1

1 0 0

BCCH Frequency List

FORMAT-ID ORIG(continued) ARFCN Note 1 high ORIG-ARFCN (middle part) ORIG- RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN ARFCN 1 2 3 4 5 6 7 (low) : : RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN 104 105 106 107 108 109 110 111 Multiband reporting

Note 1: 0 x x: Range 1024 format; 1 0 0: Range 512 format; 1 0 1: Range 256 format; 1 1 0: Range 128 format; 1 1 1: Variable bit map.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 5ter 3BK 11203 0138 DSZZA 513/639

6.59.2 EXTENDED BCCH FREQUENCY LIST / NEIGHBOUR CELLS DESCRIPTION 2 TYPE: M DEFINITION To provide the absolute radio frequency channel numbers of the extended BCCH carriers to be monitored by the MS in the cell. Used in this case for handover purposes. BIT DESCRIPTION Bitmap 0 Format 8 0 supported for P-GSM. 7 6 BA-IND 5 4 3 2 1 1 2

BA BA BA BA ARFCN ARFCN ARFCN ARFCN 124 123 122 121 BA BA BA BA BA BA BA BA ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN 120 119 118 117 116 115 114 113 ................
FORMAT-ID

Multiband Reporting

BA BA BA BA BA BA BA BA ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN ARFCN 008 007 006 005 004 003 002 001 SUB PARAMETER DEFINITION FORMAT-ID Multiband reporting BA-IND BA ARFCN N

16

Format identifier Binary coded minimum number of cells of each supported band to be included in MEASUREMENT REPORT message (if available). Range 0 to 3, set by O&M. BCCH allocation sequence number indication Range 0 to 1 BCCH Allocation Absolute RF Channel Number N if ARFCN = N belongs to the BCCH allocation, BA ARFCN N bit is coded with "1", N = 1,2 ...124 if not, BA ARFCN N bit is coded with "0", N=1,2 ...124

(Note: the number of neighbour BCCH frequencies is limited to 32)

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 5ter 3BK 11203 0138 DSZZA 514/639

Range 1024 format 8


FORMAT-ID

supported 7 Multiband Reporting 6 BA-IND 5 4 0 F0 3 W(1) (high part) 2 1 1

W(2) (low) W(3) (low part) W(4) (low part) W(5) (low part) W(6) (low part) W(8) (low) W(7) (low part)

W(2) (high part)

FORM AT-ID W(1) (low part) W(3) (high part) W(4) (high part) W(5) (high part) W(6) (high part) W(7) (high part) W(8) (high part) W(9)

4 6 7 8 9 5

10 W(11) (high) W(12) (high part) 11 12 13

W(10) W(12) (low part) W(11) (low part)

W(15) (low part)

W(14) (low part)

W(13) (low part)

W(15) (high part) W(16)

W(14) (high part)

W(13) (high part)

14

15

16

SUB PARAMETER DEFINITION FORMAT-ID Multiband reporting BA-IND F0 W(i) Format identifier Binary coded minimum number of cells of each supported band to be included in MEASUREMENT REPORT message (if available). Range 0 to 3, set by O&M. BCCH allocation sequence number indication Range 0 to 1. Frequency indicator 0 ARFCN 0 is not a member of the set 1 ARFCN 0 is a member of the set Each W(i) encodes a non negative integer in binary. if W(k) is null, W(K+1) to W(16) must be null also.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 5ter 3BK 11203 0138 DSZZA 515/639

Range 512 format 8


FORMAT-ID

supported 7 6 5 4 3 2 1

Multiband Reporting

ORIGARFCN W(1) (low part) W(3) (low part) W(4) (low) W(2) (low)

0 0 FORMAT-ID (continued) ORIG-ARFCN (middle part) W(1) (high part) W(2) (high part)

BA-IND

ORIGARFCN

1 2 4

3 5

W(4) (high part) W(5) W(6)

W(3) (high part)

6 W(7) (high) W(8) (high part)

7 8

W(9) (low part)

W(8) (low part)

W(7) (low part)

W(13) (low part)

W(12) (low part)

W(11)

W(10)

W(9) (high part)

10

W(16) (low part)

W(15)

W(14)

W(13) (high part)

W(12) (high)

11

13

12

W(17)

W(16) (high)

14

16

15

SUB PARAMETER DEFINITION FORMAT-ID Multiband reporting BA-IND ORIG-ARFCN W(i) Format identifier Binary coded minimum number of cells of each supported band to be included in MEASUREMENT REPORT message (if available). Range 0 to 3, set by O&M. BCCH allocation sequence number indication Range 0 to 1 This field encodes the ARFCN of one frequency belonging to the set. This value is also used as the origin of the bit map to generate all the other frequencies Each W(i) encodes a non negative integer in binary. if W(k) is null, W(K+1) to W(17) must be null also.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 5ter 3BK 11203 0138 DSZZA 516/639

Range 256 format 8


FORMAT-ID

supported 7 6 5 4 3 2 1

Multiband reporting

ORIGARFCN W(1) (loW)

0 1 FORMAT-ID (continued) ORIG-ARFCN (middle part) W(1) (high part) W(2) W(3)

BA-IND

ORIGARFCN

1 2 4

W(6) (low)

W(5) (low part)

W(4) (low part) W(7) W(10)

W(6) (high part)

W(4) (high) W(5) (high part) W(8) (high)

5 6 7

W(9) (low) W(11) (low part) W(14) (low part)

W(8) (low part)

W(9) (high part) W(12) W(15) W(17) W(19) W(21)

W(11) (high)

10 12 11 13 14 15 16

W(13)

W(14) (high part)

W(16) (low part) W(18) (low part) W(20) (low part)

W(16) (high) W(18) (high) W(20) (high) 0 spare

SUB PARAMETER DEFINITION FORMAT-ID Multiband reporting BA-IND ORIG-ARFCN W(i) Format identifier Binary coded minimum number of cells of each supported band to be included in MEASUREMENT REPORT message (if available). Range 0 to 3, set by O&M. BCCH allocation sequence number indication Range 0 to 1. This field encodes the ARFCN of one frequency belonging to the set. This value is also used as the origin of the bit map to generate all the other frequencies. Each W(i) encodes a non negative integer in binary. if W(k) is null, W(K+1) to W(21) must be null also.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 5ter 3BK 11203 0138 DSZZA 517/639

Range 128 format 8


FORMAT-ID

supported 7 6 5 4 3 2 1

Multiband reporting

ORIGARFCN

1 0 FORMAT-ID (continued) ORIG-ARFCN (middle part) W(1) W(2) W(5)

BA-IND

ORIGARFCN

1 2

3 4

W(4) (low) W(6) (low part) W(8)

W(3) (low part)

W(4) (high part) W(7)

W(3) (high part)

W(6) (high part)

6 7 8

W(10) W(12) W(16) W(14) W(19) W(22) W(27) W(17)

W(11) W(13) W(15) W(20) W(18) (high)

W(9)

10 11 12

W(18) (low) W(21) (low) W(26) (low)

W(24)

W(25)

W(23) W(28)

W(21) (high)

13 15 14 16

W(26) (high)

0 spare

SUB PARAMETER DEFINITION FORMAT-ID Multiband reporting BA-IND ORIG-ARFCN W(i) Format identifier Binary coded minimum number of cells of each supported band to be included in MEASUREMENT REPORT message (if available). Range 0 to 3, set by O&M. BCCH allocation sequence number indication Range 0 to 1. This field encodes the ARFCN of one frequency belonging to the set. This value is also used as the origin of the bit map to generate all the other frequencies. Each W(i) encodes a non negative integer in binary. if W(k) is null, W(K+1) to W(28) must be null also.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 5ter 3BK 11203 0138 DSZZA 518/639

Variable Bit Map format 8 1 7

supported 6 5 4 3 2 1

1 1 ORIGFORMAT-ID ARFCN (continued) high ORIG-ARFCN (middle part) ORIG- RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN ARFCN 1 2 3 4 5 6 7 (low) : : RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN RRFCN 104 105 106 107 108 109 110 111
FORMAT-ID

Multiband reporting

BA-IND

1 2

16

SUB PARAMETER DEFINITION FORMAT-ID Multiband reporting BA-IND ORIG-ARFCN RRFCN N Format identifier Binary coded minimum number of cells of each supported band to be included in MEASUREMENT REPORT message (if available). Range 0 to 3, set by O&M. BCCH allocation sequence number indication Range 0 to 1 This field encodes the ARFCN of one frequency belonging to the set. This value is also used as the origin of the bit map to generate all the other frequencies Relative radio frequency channel number N For an RF channel with ARFCN = ORIG-ARFCN + N) mod 1024 belonging to the set, then RRFCN N bit is coded as '1'. For an RF channel with ARFCN = (ORIG-ARFCN + N) mod 1024 not belonging to the set, then RRFCN N bit is coded as '0'. Note: the number of neighbour BCCH frequencies is limited to 32

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 5ter 3BK 11203 0138 DSZZA 519/639

6.60 SYSTEM INFORMATION TYPE 6


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO SACCH 44.018 This message is sent on the SACCH by the network to stations within the cell giving information of location area and various other information about the cell. From: BTS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST Header Cell Identity Location Area ID. Cell Options (SACCH) NCC permitted SI 6 Rest Octets To: MS TYPE COMMENT LENGTH (byte) 2 2 5 1 1 7 18 TIMER SYSTEM INFORMATION TYPE 6 ABIS A

DIRECTION

MV MV MV MV MV

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. BSS Initialisation (ref. [19]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 6 3BK 11203 0138 DSZZA 520/639

6.60.1 GENERAL DESCRIPTION 8 0 0 Cell Identity Location Area Identification Cell Option NCC Permitted SI 6 Rest Octets DTX 7 0 0 6 0 0 5 0 1 4 0 1 3 1 1 2 1 1 1 0 0

Cell Identity value (continued) MNC Digit 3 (Note) MNC Digit 2 LAC MCC Digit 2 MCC Digit 3 MCC Digit 1

Cell Identity value

MNC Digit 1

LAC (continued) PWRC DTX NCC permitted Radio-Link-Timeout

See CSN.1 description in 6.60.6.

Note

3 digits MNC is supported. Note that in case where only two digits MNC is used, the field MNC Digit 3 shall be filled in with 1111.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 6 3BK 11203 0138 DSZZA 521/639

6.60.2 CELL IDENTITY TYPE: M DEFINITION Identification of the cells within a location area. BIT DESCRIPTION 8 7 6 5 4 3 2 1

CI value (continued) Coding scheme depends on administration SUB PARAMETER DEFINITION CI value, Cell Identity value: See 3GPP TS 24.008.

Cell Identity value

PARAMETER ORIGIN - ACTION ON PARAMETER

6.60.3 LOCATION AREA IDENTIFICATION TYPE: M DEFINITION To provide unambiguous identification of Location Areas within the area covered by GSM system. BIT DESCRIPTION 8 7 6 5 4 3 2 1

MNC Digit 3 (Note) MNC Digit 2 LAC

MCC Digit 2

MCC Digit 3

MCC Digit 1 MNC Digit 1

LAC (continued) Note 3 digits MNC is supported. Note that in case where only two digits MNC is used, the field MNC Digit 3 shall be filled in with 1111.

SUB PARAMETER DEFINITION MCC Mobile Country Code (See CCITT. E.212) MNC Mobile Network Code (BCD) LAC Location Area Code See 3GPP TS 24.008 (Coding scheme chosen by adm) PARAMETER ORIGIN - ACTION ON PARAMETER All these parameters will be given to BSC during the Configuration. ED EVOLIUM 05 RELEASED LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 6 3BK 11203 0138 DSZZA 522/639

0138_05.doc 15/02/2008

6.60.4 CELL OPTIONS (SACCH) TYPE: M DEFINITION To provide a variety of information about a cell. BIT DESCRIPTION 8 7 6 5 4 3 2 1

DTX

PWRC

DTX

Radio-Link-Timeout

SUB PARAMETER DEFINITION PWRC: Power control indicator 0: MS shall include measurement on the BCCH carrier. PWRC is not set 1: MS shall not include measurement on the BCCH carrier. PWRC is set 000: 001: 010: 011: 100: 101: 110: 111: DTX indicator MS may use uplink discontinuous transmission on a TCH/F, MS shall not use uplink discontinuous transmission on TCH/H. MS shall use uplink discontinuous transmission on a TCH/F, MS shall not use uplink discontinuous transmission on TCH/H. MS shall not use uplink discontinuous transmission on a TCH/F, MS shall not use uplink discontinuous transmission on TCH/H. MS shall use uplink discontinuous transmission on a TCH/F, MS may use uplink discontinuous transmission on TCH/H. MS may use uplink discontinuous transmission on a TCH/F, MS may use uplink discontinuous transmission on TCH/H. MS shall use uplink discontinuous transmission on a TCH/F, MS shall use uplink discontinuous transmission on TCH/H. MS shall not use uplink discontinuous transmission on a TCH/F, MS shall use uplink discontinuous transmission on TCH/H. MS may use uplink discontinuous transmission on a TCH/F, MS shall use uplink discontinuous transmission on TCH/H.

DTX:

Radio-Link-Timeout 0000: 0001: 0010: 1110: 1111: 4 SACCH blocks 8 SACCH blocks 12 SACCH blocks 60 SACCH blocks 64 SACCH blocks

See 3GPP TS 05.08. PARAMETER ORIGIN - ACTION ON PARAMETER Information known by BSC (via O&M operation) and send to MS on SACCH. LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 6 3BK 11203 0138 DSZZA 523/639

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

6.60.5 NCC PERMITTED TYPE: M DEFINITION To provide a definition of the allowed NCCs on the BCCH carriers to be monitored by the MSs in the cell. BIT DESCRIPTION 8 7 6 5 4 3 2 1

NCC permitted

SUB PARAMETER DEFINITION NCC permitted field is coded as a bitmap i.e. bit N is coded with a "0" if the BCCH carrier with NCC = N - 1 is not permitted for monitoring, and with a "1" if the BCCH carrier with NCC = N - 1 is permitted for monitoring. N = 1, 2,..., 8. PARAMETER ORIGIN - ACTION ON PARAMETER This information is determined by O&M

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 6 3BK 11203 0138 DSZZA 524/639

6.60.6 SI 6 Rest octets TYPE: O DEFINITION The SI 6 Rest Octet information element may contain information concerning the paging, notification channels, VBS and VGCS services of the cell. BIT DESCRIPTION <SI6 rest octets> ::= {L I H <PCH and NCH info>} {L I H <VBS/VGCS options : bit(2)>} { < DTM_support : bit == L > I < DTM_support : bit == H > < RAC : bit (8) > < MAX_LAPDm : bit (3) > } < Band indicator > { L | H < GPRS_MS_TXPWR_MAX_CCH : bit (5) > } <spare padding>; <PCH and NCH info> ::= <Paging channel restructuring> <NLN(SACCH) : bit(2)> {0 I 1 <Call priority : bit (3)>} <NLN status(SACCH) : bit >; <paging channel restructuring> ::= 1| -- paging channel is restructured 0 -- paging channel is not restructured <VBS/VGCS options> ::= <inband notifications> <inband pagings>; <inband notifications>::= 0| -the network does not provide notification on FACCH so that the mobile should inspect the NCH for notifications 1 -the mobile shall be notified on incoming high priority VBS/VGCS calls through NOTIFICATION/FACCH, the mobile need not to inspect the NCH <inband pagings>::= 0| -the network does not provide paging information on FACCH so that the mobile should inspect the PCH for pagings 1 -the mobile shall be notified on incoming high priority point-to-point calls through NOTIFICATION/FACCH, the mobile need not to inspect the PCH < Band indicator > ::= < BAND_INDICATOR : bit == L > | < BAND_INDICATOR : bit == H > ; SUB PARAMETER DEFINITION PCH and NCH info Presence indicator is set to L when the feature VGCS is disable else set to H. LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 6 3BK 11203 0138 DSZZA 525/639 -- ARFCN indicates 1800 band -- ARFCN indicates 1900 band

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

This info element includes : - Paging channel restructuring that indicates if the paging channel is restructured. - Call priority that indicates the highest priority associated with VBS/VGCS calls in a cell. - NLN(Notification List Number) and NLN status :

They are managed on a per cell basis. There will be one Notification List ( of messages) per cell. -

When ever there is a modification in the Notification List due to a new voice group call (a new Notification message is added because a new VGCS call establishment) the NLN is incremented ( modulo 4). The NLN status is not touched. When there is change in the content of the Notification message or Notification List due to existing voice group calls (there is a voice group call removed from the list or there is a change in at least one Notification message,) the NLN is not changed the NLN status is changed.

VBS/VGCS options Indicates whether inband notifications and/or inband pagings are enabled in the cell ; DTM Support Indicates whether DTM is supported in the cell. RAC Routing Area Code of the RA to which the serving cell belongs MAX_LAPDm Maximum number of LAPDm frames on which a layer 3 can be segmented into and be sent on the main DCCH. It is coded as follows: Bit 210 000 Any message segmented in up to 5 LAPDm frames. 001 Any message segmented in up to 6 LAPDm frames. 010 Any message segmented in up to 7 LAPDm frames. 011 Any message segmented in up to 8 LAPDm frames. 100 Any message segmented in up to 9 LAPDm frames. 101 Any message segmented in up to 10 LAPDm frames. 110 Any message segmented in up to 11 LAPDm frames. 111 Any message segmented in up to 12 LAPDm frames. BAND_INDICATOR The band indicator for 1800 and 1900 associates the ARFCN channel numbers to the DCS 1800 or to the DCS 1900 band, respectively. The most recently received band indicator value is valid for the serving cell. If the PLMN_FREQUENCY_BANDS is set to GSM850 DCS1900 or GSM900 DCS1900, then the BAND_INDICATOR is set to HIGH, else set to LOW. GPRS_MS_TXPWR_MAX_CCH Maximum TX power level the MS shall use for packet resources while in dual transfer mode. Range : 0 to 31. PARAMETER ORIGIN - ACTION ON PARAMETER This information is determined by O&M Note : ED EVOLIUM 05 RELEASED LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 6 3BK 11203 0138 DSZZA 526/639

0138_05.doc 15/02/2008

VBS/VGCS options are set according to O&M parameters EN_INBAND_NOTIF : 0/1 EN_INBAND_PAGING : 0/1

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 6 3BK 11203 0138 DSZZA 527/639

6.61 SYSTEM INFORMATION TYPE 7 and 8


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION RADIO BCCH Extended 44.018 The SYSTEM INFORMATION TYPE 7 and 8 messages, related to SoLSA, can only be sent on the BCCH Extended. From: BTS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST L2 Pseudo Length Header SI 7 Rest Octets or SI 8 Rest Octets To: MS TYPE MV MV MV COMMENT LENGTH (byte) 1 2 20 max. 23 TIMER SYSTEM INFORMATION TYPE 7 SYSTEM INFORMATION TYPE 8 ABIS A

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. System Information Management (ref. [24]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 7 AND 8 3BK 11203 0138 DSZZA 528/639

6.61.1 GENERAL DESCRIPTION SYSTEM INFORMATION TYPE 7: 8 L2 Pseudo Length 0 0 SI 7 Rest Octets 0 0 7 6 0 0 5 0 1 4 0 1 3 1 1 2 0 1 1 1 1 0 1 L2 Pseudo Length Value=1

(20 bytes maximum)

See the table below for the detail

SYSTEM INFORMATION TYPE 8: 8 L2 Pseudo Length 0 0 SI 8 Rest Octets 0 0 7 6 0 0 5 0 1 4 0 1 3 1 0 2 0 1 0 1 1 0 0 L2 Pseudo Length Value=1

(20 bytes maximum)

See the table below for the detail

SI 7 Rest Octets or SI 8 Rest Octets detail description: Information elements PRIO_THR Length (bit) 1 3 Coding rules

Set to H (LSA Parameters is used) See 6.61.2 for detail. See 6.61.3 for detail.

LSA_OFFSET

1 1 1

Set to 0 (Exclusive MCC/MNC is not used) See 6.61.4 for detail. Set to H (Cell Identity is used)

Cell Identity LSA ID information

16 134 maximum

A list of LSA_IDs can be added until the 20 octets of the SI 7 Rest Octets or SI 8 Rest Octets are full, see 6.61.5 for detail.

Set to H (LSA ID information is used)

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 7 AND 8 3BK 11203 0138 DSZZA 529/639

6.61.2 PRIO_THR TYPE: M DEFINITION The PRIO_THR field is a signal threshold used by the mobile station to determine whether prioritised cell re-selection shall apply. The use and coding of this parameters is defined in 3GPP TS 05.08. BIT DESCRIPTION SUB PARAMETER DEFINITION PARAMETER ORIGIN - ACTION ON PARAMETER

6.61.3 LSA_OFFSET TYPE: M DEFINITION The LSA_OFFSET field applies an offset for LSA reselection between cells with same LSA priorities. The use and coding of this parameters is defined in 3GPP TS 05.08. BIT DESCRIPTION SUB PARAMETER DEFINITION PARAMETER ORIGIN - ACTION ON PARAMETER

6.61.4 CELL IDENTITY TYPE: M DEFINITION The purpose of the Cell Identity is to identify a cell within a location area. The Cell Identity is defined in 3GPP TS 44.018. BIT DESCRIPTION SUB PARAMETER DEFINITION PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 7 AND 8 3BK 11203 0138 DSZZA 530/639

6.61.5 LSA ID INFORMATION TYPE: M DEFINITION The purpose of the LSA_ID field is to identify a LSA (Localised Service Area). BIT DESCRIPTION <LSA identity> ::= <LSA ID information> ::= <LSA identity> {0 | 1 <LSA ID information>}; {0 <LSA_ID : bit (24)> |1 <ShortLSA_ID : bit (10)>};

Note: maximum of 5 long LSA_IDs (24 bits), or 11 ShortLSA_IDs (10 bits), or a mixture of the two could be accomodated within SI 7 or SI 8 message. SUB PARAMETER DEFINITION PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 7 AND 8 3BK 11203 0138 DSZZA 531/639

6.62 SYSTEM INFORMATION TYPE 10


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO SACCH 44.018 This message is sent in un-acknowledged mode only to all the VGCS mobiles listening on the downlink of the VGCH. The SYSTEM INFORMATION TYPE 10 message contains the information about neighbor cells and about the serving cell. From: BTS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST RR short PD Message type Short layer2 header SI 10 Rest Octets To: MS TYPE bit bit bit bit COMMENT LENGTH (bits) 1 5 2 160 168 TIMER SYSTEM INFORMATION TYPE 10 ABIS A

DIRECTION

IMPLEMENTATION LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. See ref. [24] ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 10 3BK 11203 0138 DSZZA 532/639

6.62.1 GENERAL DESCRIPTION 8 "short header" RR short PD 7 6 5 Message type 4 3 2 1

Short layer 2 header

SI 10 Rest Octets (160 bits)

See the table below for the detail

SI 10 Rest Octets description: <SI10 rest octets> ::= <BA ind : bit(1)> { L <spare padding> | H <neighbour information> }; <neighbour information> ::= <first frequency: bit(5)> <cell info> { H <info field> }** L <spare padding >; <cell info> ::= <bsic : bit(6)> { H <cell parameters> | L }; <cell parameters> ::= <cell barred> | L <further cell info>; <cell barred> ::= H; <further cell info> ::= <la different> <ms txpwr max cch : bit(5)> <rxlev access min : bit(6)> <cell reselect offset : bit(6)> <temporary offset : bit(3)> <penalty time : bit(5)> ; <la different> ::= { H <cell reselect hysteresis : bit(3)> | L }; <info field> ::= <next frequency>** L <differential cell info>; <next frequency> ::= H; <differential cell info> ::= { H <BCC : bit(3)> | L <bsic : bit(6)> } { H <diff cell pars> | L }; <diff cell pars> ::= <cell barred> | L <further diff cell info>; <further diff cell info> ::= <la different> { H <ms txpwr max cch : bit(5)> | L } { H <rxlev access min : bitg(6)> | L } { H <cell reselect offset : bit(6)> | L } { H <temporary offset : bit(3)> | L } { H <penalty time : bit(5)> | L }; The number of SI10 instances depend on the number of BCCH frequencies described in SI5/5bis/5ter and the number of cell expressed on term of pair (BCCH frequency, BSCI/BCC). <Example> The following list of neighbour cell frequencies (BCCH frequencies) have been sent on SACCH of voice group call channels via SI5/5bis/5ter: f(0), f(1), f(2), f(3), f(4), f(5), f(6), f(7), f(8), f(9), f(10), f(11), f(12), f(13), f(14), f(15).

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 10 3BK 11203 0138 DSZZA 533/639

a(1): f(0); a(2): f(1); a(3): f(2); a(4): f(3); a(5): f(4); a(6): f(5); a(7): f(6); a(8): f(7); a(9): f(8); a(10): f(9); a(11): f(10); a(12): f(11); a(13): f(12); a(14): f(13); a(15): f(14); a(16): f(15). Assuming that the subset of surrounding cell list contains 14 cells and the corresponding pair (BCCH frequency, BSCI/BCC) are the following: cell1=[f(0), bsic_0]; cell2=[f(1), bcc_0]; cell3=[f[1], bcc_1]; cell4=[f(5), bcc_1]; cell5=[f(6), bcc_1]; cell6=[f(6), bcc_2]; cell7=[f(6), bcc_3]; cell8=[f(7), bcc_3]; cell9=[f(8), bcc_3]; cell10=[f(9), bcc_3]; cell11=[f(10), bcc_3]; cell12=[f(12), bcc_3]; cell13=[f(13), bcc_3]); cell14=[f(15), bcc_4].

Assuming that the list of neighbour cell frequencies are in the following order determined by the mobile station:

The 1st SI10 instance:

Information elements BA ind Neighbour information first frequency bsic

Length (bit) 1 1 5 6

Coding rules Set to SACCH BA See 6.62.2 for detail. Set to H (Content of SI10 Rest Octet contains information related to neighbour cells) Set to 00000 (f(0)) Ex:Set to 010000 (NCC=010,BCC=000, see 3GPP TS 23.003, section 4.3.2) See 6.62.4 for detail. Set to L Set to L (same LA) See 6.62.7 for detail. See 6.62.8 for detail. See 6.62.9 for detail. See 6.62.10 for detail. See 6.62.6 Set to H: SI10 contains parameters of the cell1

Cell parameter Further cell info la different ms txpwr max cch rxlev access min cell reselect offset temporary offset

1 1 1 5 6 6 3

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 10 3BK 11203 0138 DSZZA 534/639

Information elements penalty time

Length (bit) 5 1

Coding rules See 6.62.11 for detail. H (H <info field>) (1st occurrence of <info field>)

H (H (<next frequency>: f(1))

L (<next frequency>**L))

H (H <BCC: bit(3)>)

BCC

3 1

000 L ({H <diff cell pars> | L }; cell2 has the some cell info as cell1)

H (H <info field>) (2nd occurrence of <info field>)

L (<next frequency>**L)) Note: f(1) is re-used with different BCC.

1 BCC 3 1

H (H <BCC: bit(3)>) 001 H ({H <diff cell pars> | L }; cell3 has some different cell info than cell2)

L (L <further diff cell info>)

la different

L (<la different> ::= { H <cell hysteresis : bit(3)> | L };): same LA) reselect

L LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 10 3BK 11203 0138 DSZZA 535/639

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

Information elements

Length (bit)

Coding rules {H <ms txpwr max cch : bit(5)> | L } (ms txpwr max cch of cell3 is the same as that of cell2)

L ({H <rxlev access min : bit(6)> | L } rxlev access min of cell3 is the same as that of cell2)

H {H <cell reselect offset : bit(6)> | L }

cell reselect offset

6 1

(new value of cell reselect offset for cell3) L ({ H <temporary offset : bit(3)> | L } temporary offset of cell3 is the same as that of cell2)

L ({H <penalty time : bit(5)> | L }; penalty time of cell3 is the same as that of cell2)

H (H <info field>) (3rd occurrence of <info field>)

H (H (<next frequency>: f(2)) Note: f(2) is not used by SI10.

H (H (<next frequency>: f(3)) Note: f(3) is not used by SI10.

H (H (<next frequency>: f(4)) Note: f(4) is not used by SI10. LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 10 3BK 11203 0138 DSZZA 536/639

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

Information elements

Length (bit) 1 H

Coding rules

(H (<next frequency>: f(5)) Note: The following description concern only f(5) that is the BCCH frequency of cell4. 1 L (<next frequency>**L)) 1 H (H <BCC: bit(3)>) BCC 3 1 001 L ({H <diff cell pars> | L }; cell4 has the some cell info as cell3) 1 H (H <info field>) (4th occurrence of <info field>) 1 H (H (<next frequency>: f(6)) 1 L (<next frequency>**L)) 1 H (H <BCC: bit(3)>) BCC 3 1 001 L ({H <diff cell pars> | L }; cell5 has the same cell info as cell4) 1 H (H <info field>) (5th occurrence of <info field>) 1 L (<next frequency>**L)) LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 10 3BK 11203 0138 DSZZA 537/639

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

Information elements

Length (bit)

Coding rules Note: f(6) is re-used with different BCC.

H (H <BCC: bit(3)>)

BCC

3 1

010 H ({H <diff cell pars> | L }; cell6 has some different cell info than cell5)

L (L <further diff cell info>)

la different

L (<la different> ::= { H <cell hysteresis : bit(3)> | L };): same LA) reselect

L {H <ms txpwr max cch : bit(5)> | L } (ms txpwr max cch of cell6 is the same as that of cell5)

L ({H <rxlev access min : bit(6)> | L } rxlev access min of cell6 is the same as that of cell5)

L {H <cell reselect offset : bit(6)> | L } cell reselect offset of cell6 is the same as that of cell5)

H ({ H <temporary offset : bit(3)> | L }

temporary offset

3 1

New value of temporary offset of cell6 L ({H <penalty time : bit(5)> | L };

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 10 3BK 11203 0138 DSZZA 538/639

Information elements

Length (bit)

Coding rules penalty time of cell6 is the same as that of cell5)

H (H <info field>) (6th occurrence of <info field>)

L (<next frequency>**L)) Note: f(6) is re-used with different BCC.

H (H <BCC: bit(3)>)

BCC

3 1

011 L ({H <diff cell pars> | L }; cell7 has the same cell info as cell6)

H (H <info field>) (7th occurrence of <info field>)

H (H (<next frequency>: f(7))

L (<next frequency>**L))

1 BCC 3 1

H (H <BCC: bit(3)>) 011 H ({H <diff cell pars> | L }; cell8 has some different cell info than cell7)

L (L <further diff cell info>)

la different

L (<la different> ::= { H <cell hysteresis : bit(3)> | L };): same LA) reselect

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 10 3BK 11203 0138 DSZZA 539/639

Information elements

Length (bit) 1 L

Coding rules

{H <ms txpwr max cch : bit(5)> | L } (ms txpwr max cch of cell8 is the same as that of cell7) 1 L ({H <rxlev access min : bit(6)> | L } rxlev access min of cell8 is the same as that of cell7) 1 H {H <cell reselect offset : bit(6)> | L } cell reselect offset 6 1 (new value of cell reselect offset for cell11) L ({ H <temporary offset : bit(3)> | L } temporary offset of cell8 is the same as that of cell7) 1 L ({H <penalty time : bit(5)> | L }; penalty time of cell8 is the same as that of cell7) 1 H (H <info field>) (8th occurrence of <info field>) 1 H (H (<next frequency>: f(8)) 1 L (<next frequency>**L)) 1 BCC 3 1 H (H <BCC: bit(3)>) 011 H ({H <diff cell pars> | L }; cell9 has some different cell info than cell8) ED EVOLIUM 05 RELEASED LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 10 3BK 11203 0138 DSZZA 540/639

0138_05.doc 15/02/2008

Information elements

Length (bit) 1 L (L

Coding rules

<further diff cell info>)

la different

L (<la different> ::= { H <cell hysteresis : bit(3)> | L };): same LA) reselect

L {H <ms txpwr max cch : bit(5)> | L } (ms txpwr max cch of cell9 is the same as that of cell8)

L ({H <rxlev access min : bit(6)> | L } rxlev access min of cell9 is the same as that of cell8)

L {H <cell reselect offset : bit(6)> | L } cell reselect offset of cell9 is the same as that of cell8)

H ({ H <temporary offset : bit(3)> | L }

temporary offset

3 1

New value of temporary offset of cell9 L ({H <penalty time : bit(5)> | L }; penalty time of cell9 is the same as that of cell8)

1 00101011 (spare padding)

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 10 3BK 11203 0138 DSZZA 541/639

The 2nd SI10 instance: Information elements BA ind Neighbour information first frequency bsic Length (bit) 1 1 5 6 Coding rules Set to SACCH BA See 6.62.2 for detail. Set to H (Content of SI10 Rest Octet contains information related to neighbour cells) Set to 01001 (f(9)) Ex:Set to 010011 (NCC=010,BCC=011, see 3GPP TS 23.003, section 4.3.2) See 6.62.4 for detail. Set to H: SI10 contains parameters of the cell10 (f(9)) Set to L Set to L (same LA) See 6.62.7 for detail. See 6.62.8 for detail. See 6.62.9 for detail. See 6.62.10 for detail. See 6.62.11 for detail. H (H <info field>) (1st occurrence of <info field>) 1 H (H (<next frequency>: f(10)) 1 L (<next frequency>**L)) 1 H (H <BCC: bit(3)>) BCC 3 011 See 6.62.6

Cell parameter Further cell info la different ms txpwr max cch rxlev access min cell reselect offset temporary offset penalty time

1 1 1 5 6 6 3 5 1

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 10 3BK 11203 0138 DSZZA 542/639

Information elements

Length (bit) 1 L

Coding rules

({H <diff cell pars> | L }; cell11 (f(10)) has the some cell info as cell10) 1 H (H <info field>) (2nd occurrence of <info field>) 1 H (H (<next frequency>: f(11)) Note: f(11) is not used by SI10. 1 H (H (<next frequency>: f(12)) 1 L (<next frequency>**L)) 1 H (H <BCC: bit(3)>) BCC 3 1 011 L ({H <diff cell pars> | L }; cell12 [f(12)] has the some cell info as cell11 [f(10)]) 1 H (H <info field>) (3rd occurrence of <info field>) 1 H (H (<next frequency>: f(13)) 1 L (<next frequency>**L)) 1 H (H <BCC: bit(3)>) BCC 3 011 LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 10 3BK 11203 0138 DSZZA 543/639

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

Information elements

Length (bit) 1 H

Coding rules

({H <diff cell pars> | L }; cell13 has some different cell info than cell12) 1 L (L la different 1 L (<la different> ::= { H <cell hysteresis : bit(3)> | L };): same LA) 1 L {H <ms txpwr max cch : bit(5)> | L } (ms txpwr max cch of cell13 is the same as that of cell12) 1 L ({H <rxlev access min : bit(6)> | L } rxlev access min of cell13 is the same as that of cell12) 1 L {H <cell reselect offset : bit(6)> | L } cell reselect offset of cell13 is the same as that of cell12) 1 H ({ H <temporary offset : bit(3)> | L } temporary offset 3 1 New value of temporary offset of cell13 L ({H <penalty time : bit(5)> | L }; penalty time of cell13 is the same as that of cell12) 1 H (H <info field>) (4th occurrence of <info field>) reselect <further diff cell info>)

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 10 3BK 11203 0138 DSZZA 544/639

Information elements

Length (bit) 1 H

Coding rules

(H (<next frequency>: f(14)) Note: f(14) is not used by SI10. 1 H (H (<next frequency>: f(15)) 1 L (<next frequency>**L)) 1 H (H <BCC: bit(3)>) BCC 3 1 100 L ({H <diff cell pars> | L }; cell14 has the some cell info as cell13) 75 011 00101011 00101011 00101011 00101011 00101011 00101011 00101011 00101011 00101011 (spare padding)

6.62.2 BA ind BA-IND, BCCH allocation sequence number indication (octet 2). Range 0 to 1 The BA-IND is needed to allow the network to discriminate measurements results related to different BAs (e.g. BA(BCCH) and BA(SACCH)) sent to the MS. Information from the last received neighbour cell description in SYSTEM INFORMATION TYPE 5/5bis/5ter is necessary for the mobile station to interpret <neighbour information>. If <BA ind> is different from the last received BA IND value indicated in SYSTEM INFORMATION TYPE 5/5bis/5ter, <neighbour information> cannot be interpreted by the mobile station. 6.62.3 First frequency It specifies a first frequency number n+1 where n is 0<= n <= 31. 6.62.4 Bsic Each occurrence of bsic specifies a BSIC composed of a BCC(bit(3) and a NCC(bit(3)). ED EVOLIUM 05 RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 10 3BK 11203 0138 DSZZA 545/639

Set by O& M 6.62.5 Cell barred Indicates if cell is barred 6.62.6 La different If "la different" contains a "cell reselect hysteresis : bit (3)", this means that the cell is to be considered by the mobile station to belong to a different location area and that for the cell, the cell reselect hysteresis specified in "cell reselect hysteresis : bit (3)" applies. If "la different" doesn't contain a "cell reselect hysteresis : bit (3)", this means that the cell is to be considered by the mobile station to belong to the same location area.

6.62.7 Ms txpwr max cch Maximum transmission power an MS is allowed to use when accessing the cell until otherwise commanded, broadcast on PBCCH for CS service establishment. Set by O&M 6.62.8 Rxlev access min Minimum received level at the MS required for initial access to the cell. Set by O&M 6.62.9 Cell reselection offset Permanent offset to C2 criterion. Set by O&M

6.62.10 Temporary offset Offset applied to C2 criterion for the duration of PENALTY_TIME Set by O&M 6.62.11 Penalty time Time during which MS shall apply TEMPORARY_OFFSET to C2 criterion. Set by O&M

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 10 3BK 11203 0138 DSZZA 546/639

6.63 SYSTEM INFORMATION TYPE 13


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO BCCH or BCCH Extended 44.018 This message is sent by the network on either the BCCH or the BCCH Extended, to all the Mobile Stations within the cell giving information about the GPRS service. It is sent only if the GPRS service is supported in the cell. From: BTS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST L2 Pseudo Length Header SI 13 Rest Octets To: MS TYPE MV MV MV COMMENT LENGTH (byte) 1 2 20 23 TIMER SYSTEM INFORMATION TYPE 13 ABIS A

DIRECTION

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. FBS GPRS - Radio Interface - RRM sublayer -PRH (ref. [34]) System Information Management (ref. [24]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 13 3BK 11203 0138 DSZZA 547/639

6.63.1 GENERAL DESCRIPTION 8 L2 Pseudo Length 0 0 SI 13 Rest Octets 0 0 7 6 0 0 5 0 0 4 0 0 3 1 0 2 0 1 0 1 1 0 0 L2 Pseudo Length Value=0

(20 bytes maximum)

See the tables below for the detail

SI 13 Rest Octets detail description (without PBCCH configured in the cell , in case of hopping PDCH): Information elements Length (bit) 1 Coding rules Set to H (Content of SI13 Rest Octet is not empty) See 6.63.3 for detail. See 6.63.2 for detail.

BCCH_CHANGE_MARK SI_CHANGE_FIELD

SI13_CHANGE_MARK HSN

1 1

Set to 1.

Set to 0 (RFL number list is not included). Set to 0 (MA_BITMAP is used). See 6.63.5 for detail. See 6.63.5 for detail.

See 6.63.5 for detail.

See 6.63.4 for detail.

MA_LENGTH MA_BITMAP

val(MA_LE NGTH) + 1

RAC

SPGC_CCCH_SUP PRIORITY_ACCESS_TH R NETWORK_CONTROL_ ORDER NMO

Set to 0 (PBCCH is not present in cell).

3 2 2 3

Set to the PRIORITY_ACCESS_THRESHOLD value, see 6.63.6 for detail. Set to the NETWORK_CONTROL_ORDER value, see 6.63.7 for detail. Set to NETWORK_OPERATION_MODE - 1, see 6.63.8 for detail.

Set to 0 since SPLIT_PG_CYCLE on CCCH is not supported.

Routing Area Code, set to the RA_CODE value.

T3168 T3192 ED EVOLIUM 05 RELEASED

Set to the T3192 value, see 6.63.8 for detail. LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 13 3BK 11203 0138 DSZZA 548/639

Set to the T3168 value, see 6.63.8 for detail.

0138_05.doc 15/02/2008

Information elements DRX_TIMER_MAX ACCESS_BURST_TYPE CONTROL_ACK_TYPE BS_CV_MAX

Length (bit) 3

Coding rules Set to the DRX_TIMER_MAX value, see 6.63.8 for detail. Set to the 0, see 6.63.8 for detail. See 6.63.8 for detail.

4 1

Set to the BS_CV_MAX value, see 6.63.8 for detail. Set to 1 (PAN_DEC, PAN_INC and PAN_MAX are included).

PAN_DEC PAN_INC

3 3

Set to the PAN_DEC value, see 6.63.8 for detail. Set to the PAN_MAX value, see 6.63.8 for detail. Set to 1 (Extension Information is included). Set to 1 if EGPRS uis supported. Set to 0 otherwise. Length of extension + 1 Set to the PAN_INC value, see 6.63.8 for detail.

PAN_MAX

Extension length

1 EGPRS_PACKET_CHAN NEL_REQUEST BEP_PERIOD PFC_FEATURE_MODE DTM_SUPPORT BSS_PAGING_COORDI NATION CCN_ACTIVE NW_EXT_UTBF 1 4

Included only if EGPRS is supported.

Included only if EGPRS is supported. See 6.63.8 for detail. See 6.63.8 for detail.

Set to 0

MULTIPLE_TBF_CAPABI LITY EXT_UTBF_NO_DATA DTM_ENHANCEMENTS _CAPABILITY ALPHA

Set to 0, see 6.63.8 for detail. See 6.63.8 for detail.

See 6.63.8 for detail.

See 6.63.8 for detail.

Set to 0, see 6.63.8 for detail. Set to 0 (MBMS procedures not supported) See 6.63.9 for detail.

1 5

T_AVG_W T_AVG_T N_AVG_I PC_MEAS_CHAN

Set to the ALPHA value, see 6.63.9 for detail.

See 6.63.9 for detail.

1 1

See 6.63.9 for detail.

See 6.63.9 for detail.

SGSNR ED EVOLIUM 05 RELEASED

Set to the SGSNR value:

Set to H (Additions in release 99 is included).

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 13 3BK 11203 0138 DSZZA 549/639

Information elements

Length (bit)

Coding rules 0 SGSN is Release '98 or older 1 SGSN is Release '99 onwards

1 SI_STATUS_IND 1

Set to H (Additions in release 4 is included). Set to 1 when Packet SI Status is supported in the cell. Set to 0 otherwise.

SI 13 Rest Octets detail description (with PBCCH configured in the cell, in case of non hopping PDCHs): Information elements Length (bit) 1 Coding rules Set to H (Content of SI13 Rest Octet is not empty) See 6.63.3 for detail. See 6.63.2 for detail.

BCCH_CHANGE_MARK SI_CHANGE_FIELD

1 1 4

Set to 0.

PSI1_REPEAT_PERIOD Pb TSC TN

Set to 1 (PBCCH is present in cell). See 6.63.11 for detail. See 6.63.10 for detail.

See 6.63.11 for detail.

See 6.63.11 for detail.

ARFCN

10 1

Set to 01 (ARFCN is used to describe the PBCCH frequency used, in case of non hopping channel) Set to H (Additions in release 99 is included). Set to the SGSNR value: 0 SGSN is Release '98 or older 1 SGSN is Release '99 onwards See 6.63.11 for detail.

SGSNR

1 SI_STATUS_IND 1

Set to H (Additions in release 4 is included). Set to 1 when Packet SI Status is supported in the cell. Set to 0 otherwise.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 13 3BK 11203 0138 DSZZA 550/639

SI 13 Rest Octets detail description (with PBCCH configured in the cell, in case of hopping PDCHs): Information elements Length (bit) 1 Coding rules Set to H (Content of SI13 Rest Octet is not empty) See 6.63.3 for detail. See 6.63.2 for detail.

BCCH_CHANGE_MARK SI_CHANGE_FIELD

SI13_CHANGE_MARK HSN

1 1

Set to 1

Set to 0 (RFL number list is not included). Set to 0 (MA_BITMAP is used). See 6.63.5 for detail. See 6.63.5 for detail.

See 6.63.5 for detail.

See 6.63.4 for detail.

MA_LENGTH MA_BITMAP

val(MA_LE NGTH) + 1

PSI1_REPEAT_PERIOD Pb TSC TN

Set to 1 (PBCCH is present in cell). See 6.63.11 for detail. See 6.63.10 for detail.

1 6

See 6.63.11 for detail.

See 6.63.11 for detail.

MAIO

1 1

See 6.63.11 for detail.

Set to 1 (MAIO is used to describe the PBCCH frequency used, in case of hopping channel) Set to H (Additions in release 99 is included). 0 SGSN is Release '98 or older 1 SGSN is Release '99 onwards

SGSNR

Set to the SGSNR value:

1 SI_STATUS_IND 1

Set to H (Additions in release 4 is included). Set to 1 when Packet SI Status is supported in the cell. Set to 0 otherwise.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 13 3BK 11203 0138 DSZZA 551/639

6.63.2 BCCH_CHANGE_MARK TYPE: M DEFINITION This field indicates the status of the information on BCCH. The value of this field may be changed when information on BCCH is changed, see 3GPP TS 44.060. BIT DESCRIPTION SUB PARAMETER DEFINITION PARAMETER ORIGIN - ACTION ON PARAMETER The value of this field shall be increased by 1 each time the information content is changed on BCCH, but shall not be incremented when SI 13 only is modified. 6.63.3 SI_CHANGE_FIELD TYPE: M DEFINITION SI_CHANGE_FIELD value indicates which SI among type 1, 2, 3, 4, 7, 8 (, 9) has changed at the last BCCH_CHANGE_MARK indication. Range 0 to 15: BIT DESCRIPTION 0 Update of unspecified SI message or SI messages: this is used in case of update of several different SI types (e.g. SI 16 & SI 17 modifications when LSA_IDs are configured in the cell) Update of SI 1 message Update of SI 2, SI 2bis or SI 2ter message Update of SI 3, SI 4, SI 7, SI 8, SI 16 or SI 17 message Update of SI 9 message (not used, since SI 9 is not supported) Update of SI 18 or SI20 message (not used, since SI 18 and SI 20 are not supported) Update of SI 19 message(not used, since SI 19 is not supported) Update of SI 15 message(not used, since SI 15 is not supported)

1 2 3 4 5 6 7

All other values shall be interpreted as 'update of unknown SI message type'. SUB PARAMETER DEFINITION PARAMETER ORIGIN - ACTION ON PARAMETER

Upon changes of the contents of the RACH Control Parameters information element alone, it would be sufficient that the SI_CHANGE_FIELD parameter indicates only one of the SI message containing the RACH Control Parameters (e.g. SI 1). But, in practice, the BSC only increments the BCCH_CHANGE_MARK value and does not update the SI_CHANGE_FIELD parameter. So the MS will get the last updated SI message(s) once more. When there is no PBCCH configured in the cell, the BSC shall notify the MFS of any BCCH_CHANGE_MARK modification with the new SI_CHANGE_FIELD value.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 13 3BK 11203 0138 DSZZA 552/639

6.63.4 SI13_CHANGE_MARK TYPE: O DEFINITION This field is the binary representation of the SI change mark identifying the GPRS Mobile Allocation provided in SI13 messages. BIT DESCRIPTION Range: 0 to 3. SUB PARAMETER DEFINITION PARAMETER ORIGIN - ACTION ON PARAMETER SI13_CHANGE_MARK is increased by 1 each time the GPRS Mobile Allocation or the Cell Allocation changes (it is coded on 2 bits). The SI13_CHANGE_MARK is provided by the MFS through BSCGP interface with cell radio configuration, see ref [36].

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 13 3BK 11203 0138 DSZZA 553/639

6.63.5 GPRS MOBILE ALLOCATION TYPE: O DEFINITION This information element is the representation of the GPRS mobile allocation provided in SI13 message. It is identified by MA_NUMBER = 14 when referenced from a packet assignment message. The GPRS Mobile Allocation information element defines a set of radio frequency channels and a hopping sequence number (HSN), which may be allocated to a mobile station to define its channel configuration.

There are two alternative ways to encode the GPRS mobile allocation, using the MA_BITMAP or the ARFCN index list. The MA_BITMAP is used by the Alcatel BSS. BIT DESCRIPTION < GPRS Mobile Allocation IE > ::= < HSN : bit (6) > {0|1 < RFL number list : < RFL number list struct > > } { 0 < MA_LENGTH : bit (6) > < MA_BITMAP : bit (val(MA_LENGTH) + 1) > |1 {0|1 < ARFCN index list : < ARFCN index list struct > > } } ; SUB PARAMETER DEFINITION HSN (6 bit field) This field is the binary representation of the hopping sequence number, Range: 0 to 63.

RFL number list (construction) This construction is a list specifying the referenced set of reference frequency lists for this information element. Note that the Alcatel BSS does not use this construction. MA_BITMAP (variable length, 1 to 64 bit, field) This field is a bitmap representing the radio frequency channels belonging to the GPRS mobile allocation. The number of bit positions in MA_BITMAP shall equal NF (NF: Number of Frequencies). The first bit position in MA_BITMAP corresponds to ARFCN_INDEX = NF-1, the last position corresponds to ARFCN_INDEX = 0. Each bit position is coded: 0 the corresponding radio frequency channel does not belong to the GPRS mobile allocation; 1 the corresponding radio frequency channel belongs to the GPRS mobile allocation.
8 NF -1 : 5 7 NF -2 4 6 NF -3 3 5 NF - 4 2 4 NF - 5 1 3 NF - 6 0 2 NF - 7 1 NF - 8 :

ARFCN index list (construction) This construction is a list representing a set of radio frequency channels to be excluded from the definition of the GPRS mobile allocation. Note that the Alcatel BSS does not use this construction. PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 13 3BK 11203 0138 DSZZA 554/639

6.63.6 PRIORITY_ACCESS_THR TYPE: O DEFINITION This field is the binary representation of the parameter PRIORITY_ACCESS_THR.

BIT DESCRIPTION

0 0 0 packet access is not allowed in the cell; 0 0 1 spare, shall be interpreted as '000' (packet access not allowed); 0 1 0 spare, shall be interpreted as '000' (packet access not allowed); 0 1 1 packet access is allowed for priority level 1; 1 0 0 packet access is allowed for priority level 1 to 2; 1 0 1 packet access is allowed for priority level 1 to 3; 1 1 0 packet access is allowed for priority level 1 to 4; 1 1 1 spare, shall be interpreted as '110' (packet access allowed).

SUB PARAMETER DEFINITION PARAMETER ORIGIN - ACTION ON PARAMETER 6.63.7 NETWORK_CONTROL_ORDER TYPE: O DEFINITION This field is the binary representation of the parameter NETWORK_CONTROL_ORDER.

BIT DESCRIPTION 00 01 10 11 NC0: MS controlled cell re-selection, no measurement reporting. NC1: MS controlled cell re-selection, MS sends measurement reports (not used). NC2: Network controlled cell re-selection, MS sends measurement reports (not used). Reserved for future use, interpreted as NC0 by mobile station.

SUB PARAMETER DEFINITION PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 13 3BK 11203 0138 DSZZA 555/639

6.63.8 GPRS CELL OPTIONS TYPE: O DEFINITION The GPRS Cell Options information element is used to control a set of cell options related to GPRS. BIT DESCRIPTION

< GPRS Cell Options IE > ::= < NMO : bit (2) > < T3168 : bit (3) > < T3192 : bit (3) > < DRX_TIMER_MAX : bit (3) > < ACCESS_BURST_TYPE : bit > < CONTROL_ACK_TYPE : bit > < BS_CV_MAX : bit (4) > {0|1 < PAN_DEC : bit (3) > (Note 1) < PAN_INC : bit (3) > < PAN_MAX : bit (3) > } -- Optional extension information, {0|1 <Extension Length : bit (6)> (Note 2) < bit (val(Extension Length) + 1) & { <Extension Information > ! { bit ** = <no string> } } > } ; < Extension Information> : : = { 0 | 1 EGPRS supported by the cell if the choice bit is set to '1' <EGPRS_PACKET_ CHANNEL_REQUEST : bit> < BEP_PERIOD : bit (4) > } <PFC_FEATURE_MODE: bit> <DTM_SUPPORT: bit> <BSS_PAGING_COORDINATION: bit> -- REL-4 extension: < CCN_ACTIVE : bit > < NW_EXT_UTBF : bit > -- REL 6 extension: < MULTIPLE_TBF_CAPABILITY : bit > < EXT_UTBF_NO_DATA : bit > < DTM_ENHANCEMENTS_CAPABILITY : bit > { 0 -- MBMS procedures not supported by the cell if the choice bit is set to '0' (Note 3) | 1 -- MBMS procedures supported by the cell if the choice bit is set to '1' < DEDICATED_MODE_MBMS_NOTIFICATION_SUPPORT: bit > < MNCI_SUPPORT : bit > } <spare bit > ** ; Note 1: PAN_DEC, PAN_INC, PAN_MAX should be present. Note 2: Extension information should be present. Note 3: MBMS procedures are not supported. SUB PARAMETER DEFINITION NMO (2 bit field) This field is the binary representation of the Network Mode of Operation, see 3GPP TS 03.60: 00 Network Mode of Operation I 01 Network Mode of Operation II 10 Network Mode of Operation III 11 Reserved.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 13 3BK 11203 0138 DSZZA 556/639

T3168 (3 bit field) This field is the binary representation of the timeout value of timer T3168. Range: 0 to 7. The timeout value is given as the binary value plus one in units of 500 millisecond.

T3192 (3 bit field) This field is the binary representation of the timeout value of timer T3192. Range: 0 to 7. The timeout value is given as follows: 000 500 msec 001 1000 msec 010 1500 msec 011 0 msec 100 80 msec 101 120 msec 110 160 msec 111 200 msec DRX_TIMER_MAX (3 bit field) This field is the binary representation of the parameter DRX_TIMER_MAX. Range: 0 to 7. The parameter value is given as two taken to the power of the binary value minus one (2 (bv - 1) ) in units of 1 second. The binary value zero indicates the parameter value zero (i.e, the parameter takes the values: 0, 1 s, 2 s, 4 s, .. 64 s.) ACCESS_BURST_TYPE (1 bit field) The ACCESS_BURST_TYPE field indicates if the 8 or 11 bit format shall be used in the PACKET CHANNEL REQUEST message, the PTCCH uplink block (3GPP TS 04.04) and in the PACKET CONTROL ACKNOWLEDGMENT message when the format is four access bursts. The field is coded as follows: 0 8-bit format shall be used 1 11-bit format shall be used CONTROL_ACK_TYPE (1 bit field) This field is the binary representation of the default format of the PACKET CONTROL ACKNOWLEDGMENT message: 0 default format is four access bursts 1 default format is RLC/MAC control block. (not used)

BS_CV_MAX (4 bit field) This field is the binary representation of the parameter BS_CV_MAX. Range: 0 to 15. The value BS_CV_MAX=0 shall be interpreted as value BS_CV_MAX=1 for calculation of T3198, T3200 and N3104max values PAN_DEC (3 bit field) This field is the binary representation of the parameter PAN_DEC. If the field in not included, the default value 0 shall be used. Range: 0 to 7. PAN_INC (3 bit field) This field is the binary representation of the parameter PAN_INC. If the field in not included, the default value 0 shall be used. Range: 0 to 7.

PAN_MAX (3 bit field) This field defines the maximum value allowed for counter N3102. 000 maximum value allowed for counter N3102 is 4 001 maximum value allowed for counter N3102 is 8 ... 111 maximum value allowed for counter N3102 is 32 If the PAN_MAX field in not included, the default value 0 (i.e. N3102 max = 4) shall be used. Optional extension information: ED EVOLIUM 05 RELEASED LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 13 3BK 11203 0138 DSZZA 557/639

0138_05.doc 15/02/2008

EGPRS_PACKET_CHANNEL_REQUEST (1 bit field) 0 EGPRS capable MSs shall use EGPRS PACKET CHANNEL REQUEST message for uplink TBF establishment on the PRACH when there is a PBCCH in the cell or on the RACH when there is no PBCCH in the cell. EGPRS capable MSs shall use two phase packet access with PACKET CHANNEL REQUEST message on the PRACH for uplink TBF establishment when there is a PBCCH in the cell. EGPRS capable MSs shall use two phase packet access with CHANNEL REQUEST message on the RACH when there is no PBCCH in the cell.

(not used)

BEP_PERIOD (4 bit field)

This field contains the bit error probability (BEP) filter averaging period

PFC_FEATURE_MODE (1 bit field) 0 1 The network does not support packet flow context procedures. The network supports packet flow context procedures.

DTM_SUPPORT (1 bit field) 0 1

This field indicates whether the cell supports DTM or not. It is coded as follows: The cell does not support DTM procedures. The cell supports DTM procedures.

BSS_PAGING_COORDINATION (1 bit field)

This field indicates the network support of CS paging co-ordination in packet transfer mode during network mode of operation II and III. This field shall be ignored by the mobile station during network mode of operation I. It is coded as follows: 0 1 The cell does not support Circuit-Switched paging co-ordination The cell supports Circuit-Switched paging co-ordination (not used)

CCN_ACTIVE (1 bit field) This field indicates whether the cell supports Network Assisted Cell Change (NACC) or not. It is coded as follows : 0 The cell does not support NACC procedures. 1 The cell supports NACC procedures. NW_EXT_UTBF (1 bit field) This field indicates whether the cell supports Uplink Extended TBF mode or not. It is coded as follows : 0 The cell does not support Extended UL TBF mode procedures. 1 The cell supports Extended UL TBF mode procedures. MULTIPLE_TBF_CAPABILITY (1 bit field) This field indicates whether or not the cell supports multiple TBF procedures for A/Gb mode. It is coded as follows : 0 The cell does not support multiple TBF procedures for A/Gb mode. 1 The cell supports multiple TBF procedures for A/Gb mode. (not used) LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 13 3BK 11203 0138 DSZZA 558/639

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

EXT_UTBF_NO_DATA (1 bit field) This field indicates whether the mobile station during extended uplink TBF mode may refrain from sending PACKET UPLINK DUMMY CONTROL BLOCK messages when there is no other RLC/MAC block ready to send in an uplink radio block allocated by the network. It is coded as follows : 0 The mobile station shall send a PACKET UPLINK DUMMY CONTROL BLOCK message when there is no other RLC/MAC block ready to send in an uplink radio block allocated by the network. 1 The mobile station may refrain from sending a PACKET UPLINK DUMMY CONTROL BLOCK message when there is no other RLC/MAC block ready to send in an uplink radio block allocated by the network. DTM_ENHANCEMENTS_CAPABILITY (1 bit field) This field indicates whether the cell supports enhanced DTM CS establishment and enhanced DTM CS release or not. It is coded as follows : 0 The cell does not support enhanced DTM CS establishment and enhanced DTM CS release. 1 The cell supports enhanced DTM CS establishment and enhanced (not used) DTM CS release. DEDICATED_MODE_MBMS_NOTIFICATION_SUPPORT (1 bit field) This field indicates whether the cell supports Dedicated Mode MBMS Notification or not. It is coded as follows: 0 The cell does not support the Dedicated Mode MBMS Notification (not used) procedures. 1 The cell supports the Dedicated Mode MBMS Notification procedures. (not used) MNCI_SUPPORT (1 bit field) This field indicates whether the cell supports the distribution of MBMS NEIGHBOURING CELL INFORMATION messages. It is coded as follows: 0 The cell does not support the distribution of MBMS NEIGHBOURING (not used) CELL INFORMATION messages. 1 The cell supports the distribution of MBMS NEIGHBOURING CELL (not used) INFORMATION messages. PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 13 3BK 11203 0138 DSZZA 559/639

6.63.9 GPRS POWER CONTROL PARAMETERS TYPE: O DEFINITION BIT DESCRIPTION < ALPHA : bit (4) > < T_AVG_W : bit (5) > < T_AVG_T : bit (5) > < PC_MEAS_CHAN : bit > < N_AVG_I : bit (4) >;

SUB PARAMETER DEFINITION ALPHA (4 bit field) The ALPHA field is the binary representation of the parameter for MS output power control in units of 0.1, see 3GPP TS 05.08: Range: 0 to 10. Values greater than 10 shall be interpreted as 10 by the mobile station.

T_AVG_W (5 bit field) The T_AVG_W field is the binary representation of the parameter TAVG_W for MS output power control, see 3GPP TS 05.08: Range: 0 to 25. Values greater than 25 shall be interpreted as 25 by the mobile station. T_AVG_T (5 bit field) The T_AVG_T field is the binary representation of the parameter TAVG_T for MS output power control, see 3GPP TS 05.08: Range: 0 to 25. Values greater than 25 shall be interpreted as 25 by the mobile station.

PC_MEAS_CHAN (1 bit field) The PC_MEAS_CHAN field indicates the type of channel which shall be used for downlink measurements for power control: 0 BCCH; 1 PDCH. N_AVG_I (4 bit field) The N_AVG_I field is the binary representation of the parameter NAVG_I for MS output power control, see 3GPP TS 05.08: Range: 0 to 15. PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 13 3BK 11203 0138 DSZZA 560/639

6.63.10 PSI1_REPEAT_PERIOD TYPE: O DEFINITION This field (4 bit) is the representation of the PSI1 repeat period. BIT DESCRIPTION 0000 0001 : 1111 PSI1 repeat period = 1 multiframe PSI1 repeat period = 2 multiframes PSI1 repeat period = 16 multiframes

SUB PARAMETER DEFINITION PARAMETER ORIGIN - ACTION ON PARAMETER 6.63.11 PBCCH DESCRIPTION TYPE: O DEFINITION The PBCCH description struct provides the channel description for the PBCCH. The frequency description for the PBCCH may be specified by an ARFCN (non-hopping radio frequency channel) or a MAIO (hopping radio frequency channel) field. In case of a hopping radio frequency channel, the PBCCH shall use the GPRS mobile allocation specified in this message. If none of the ARFCN or MAIO fields are present, the PBCCH shall use the BCCH carrier. BIT DESCRIPTION <Pb : bit (4) < TSC : bit (3) > < TN : bit (3) > { 00 -- BCCH carrier | 01 < ARFCN : bit (10) > |1 < MAIO : bit (6) >} ;

SUB PARAMETER DEFINITION Pb (4 bit field) Power reduction value used by the BTS on PBCCH blocks, relative to the output power used on BCCH. Set to 0 : Pb = 0 dB TSC (3 bit field) The TSC field (3 bit) is the binary representation of the training sequence code used for PBCCH. Range: 0 to 7.

ARFCN (10 bit field) The ARFCN field is the binary representation of the absolute RF channel number. Range: 0 to 1023.

TN (3 bit field) The TN field (3 bit) is the binary representation of the timeslot number for the PBCCH. Range: 0 to 7.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 13 3BK 11203 0138 DSZZA 561/639

MAIO (6 bit field) The MAIO field is the binary representation of the mobile allocation index offset. Range: 0 to 63. PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 13 3BK 11203 0138 DSZZA 562/639

6.64 SYSTEM INFORMATION TYPE 16 and 17


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION RADIO BCCH Extended 44.018 The SYSTEM INFORMATION TYPE 16 and 17 messages, related to SoLSA, can only be sent on the BCCH Extended. From: BTS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST L2 Pseudo Length Header To: MS TYPE MV MV MV COMMENT LENGTH (byte) 1 2 20 max. 23 TIMER SYSTEM INFORMATION TYPE 16 SYSTEM INFORMATION TYPE 17 ABIS A

SI 16 Rest Octets or SI 17 Rest Octets

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. System Information Management (ref. [24]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 16 AND 17 3BK 11203 0138 DSZZA 563/639

6.64.1 GENERAL DESCRIPTION SYSTEM INFORMATION TYPE 16: 8 L2 Pseudo Length 0 0 SI 16 Rest Octets 0 0 7 6 0 1 5 0 1 4 0 1 3 1 1 2 0 1 0 1 1 0 1 L2 Pseudo Length Value=1

(20 bytes maximum)

See the table below for the detail

SYSTEM INFORMATION TYPE 17: 8 L2 Pseudo Length 0 0 SI 17 Rest Octets 0 0 7 6 0 1 5 0 1 4 0 1 3 1 1 2 0 1 1 1 1 0 0 L2 Pseudo Length Value=1

(20 bytes maximum)

See the table below for the detail

SI 16 or SI 17 Rest Octets Rest Octets detail description:


Information elements PRIO_THR Length (bit) 1 3 Coding rules Set to H (LSA Parameters are included) See 6.64.2 for coding. See 6.64.3 for coding.

LSA_OFFSET

LSA ID information

152 maximum

A list of LSA_IDs can be added until the 20 octets of the SI 16 or SI 17 Rest Octets Rest Octets are full, see 6.64.4 for detail.

Set to 0 (Exclusive MCC and MNC are not included)

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 16 AND 17 3BK 11203 0138 DSZZA 564/639

6.64.2 PRIO_THR TYPE: M DEFINITION The PRIO_THR field is a signal threshold used by the mobile station to determine whether prioritised cell re-selection shall apply. The use and coding of this parameters is defined in 3GPP TS 05.08. BIT DESCRIPTION SUB PARAMETER DEFINITION PARAMETER ORIGIN - ACTION ON PARAMETER

6.64.3 LSA_OFFSET TYPE: M DEFINITION The LSA_OFFSET field applies an offset for LSA reselection between cells with same LSA priorities. The use and coding of this parameters is defined in 3GPP TS 05.08. BIT DESCRIPTION SUB PARAMETER DEFINITION PARAMETER ORIGIN - ACTION ON PARAMETER

6.64.4 LSA ID INFORMATION TYPE: M DEFINITION The purpose of the LSA_ID field is to identify a LSA (Localised Service Area). BIT DESCRIPTION <LSA ID information> ::= <LSA identity> {0 | 1 <LSA ID information>}; <LSA identity> ::= {0 <LSA_ID : bit (24)> |1 <ShortLSA_ID : bit (10)>}.

Note: maximum of 5 long LSA_IDs (24 bits), or 12 ShortLSA_IDs (10 bits), or a mixture of the two could be accomodated within SI 16 or SI17 message. SUB PARAMETER DEFINITION PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SYSTEM INFORMATION TYPE 16 AND 17 3BK 11203 0138 DSZZA 565/639

6.65 TALKER INDICATION


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO FACCH 44.018 This message is sent by the mobile station to the network to give the talker information when a new layer 2 connection is established on a VGCS channel after an uplink access. From: MS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST Header Mobile Station Classmark 2 Mobile Identity Ciphering Key Sequence Number To: BTS TYPE COMMEN T LENGTH (byte) 2 4 2-9 1 TALKER INDICATION ABIS A

DIRECTION

M LV M LV O TV

Not used

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT ABNORMAL SITUATION

16 TIMER

SPECIF DOC. REF.

See ref [36]

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE TALKER INDICATION 3BK 11203 0138 DSZZA 566/639

6.65.1 GENERAL DESCRIPTION

8 0 0 Mobile Station Classmark 2 0 spare 0 spare CM3

7 0 0

6 0 0

5 0 1

4 0 0 A5/1 SM. cap

3 1 0

2 1 0 RF power Capability VGCS A5/3

0 1

Revision ESlevel IND PS SS Screen. Capa. Indicator 0 spare

Length of MS classmark 2 contents

VBS

FC A5/2

Identity

Mobile

ID digit 1 ...

LCS UCS2 SoLSA CMSP VA CAP Length of Mobile Identity contents OEI

ID digit 3

ID digit 2 ID digit p ...

Type of ID

ID digit p+1

6.65.2 MS CLASSMARK 2 TYPE: M DEFINITION Defines certain attributes of the Mobile Station equipment in use on a particular transaction. BIT DESCRIPTION 8 0 spare 0 spare CM3 7 6 5 Length 4 3 2 RF power Capability VBS CMSP VGCS A5/3 1 1 2 FC A5/2 3 4

Revision ES level IND PS SS Screen. Capa. Indicator 0 spare LCS VA CAP

A5/1 SM. cap

UCS2

SoLSA

Bit 8 of octet 2 spare set to 0 Bits 8 of octet 3 spare set to 0 LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE TALKER INDICATION 3BK 11203 0138 DSZZA 567/639

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

SUB PARAMETER DEFINITION Octet 2: Bits Revision level 76 00 01 10 5 0 1 Bit A5/1 Bits RF Power capability P-GSM, GSM850 and E-GSM 4 0 1 321 000 001 010 011 100 000 001 010 000 001 010

Bit ES-IND

Reserved for phase 1 Used by phase 2 MS Used by mobile stations supporting R99 or later versions of the protocol All other value reserved Controlled Early Classmark Sending option not implemented. Controlled Early Classmark Sending option implemented. algorithm A5/1 available algorithm A5/1 not available. class 1 class 2 class 3 class 4 class 5 All other values reserved class 1 class 2 class 3, handled as class 1 All other values reserved class 1 class 2 class 3, handled as class 1 All other values reserved

DCS1800

DCS1900

Octet 3: Bit PS Capability Bits SS Screening Indicator

Bit SM Capability Bit VBS Voice Broadcast Service Bit VGCS Voice Call Service

7 0 1 65 00 01 10 11 4 0 1 3 0

PS capability not present PS capability present Defined in GSM 04.80 Defined in GSM 04.80 Defined in GSM 04.80 Defined in GSM 04.80 MS does not support mobile terminated point to point SMS. MS supports mobile terminated point to point SMS. no VBS capability or no notifications wanted

Group

1 VBS capability and notifications wanted Not implemented in the BSS. 2 0 no VGCS capability or no notifications wanted 1 VGCS capability and notifications wanted LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE TALKER INDICATION 3BK 11203 0138 DSZZA 568/639

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

Bit FC Capability

Frequency GSM900

1 0 1 0 The MS does not support the extension band G1 in addition to the primary GSM band. The MS does support the extension band G1. Reserved for future use

GSM850, DCS1800, DCS1900

Note: only FC is checked in this release and only in GSM900 configuration.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE TALKER INDICATION 3BK 11203 0138 DSZZA 569/639

Octet 4 Bit CM3 Classmark 3 Bit LCS VA capability

8 0 1 6 0

No additional MS capability Additional MS capabilities are described in the MS Classmark 3 information element.

Bit UCS2 treatment

Bit SoLSA Bit CMSP: CM Service Prompt

Bit A5/3 algorithm supported Bit A5/2 algorithm supported

LCS value added location request notification capability not supported 1 LCS value added location request notification capability supported Not implemented in the BSS. 5 0 the ME has a preference for the default alphabet (defined in GSM 03.38) over UCS2 1 the ME has no preference between the use of the default alphabet and the use of UCS2. Not implemented in the BSS. 4 0 The ME does not support SoLSA 1 The ME supports SoLSA. 3 0 "Network initiated MO CM connection request" not supported 1 "Network initiated MO CM connection request" supported for at least one CM protocol. Not implemented in the BSS. 2 0 A5/3 not available 1 A5/3 available 1 0 A5/2 not available 1 A5/2 available Note: only A5/2 is checked in this release.

PARAMETER ORIGIN - ACTION ON PARAMETER The BSC takes this information in order to have the MS power capability for the power control algorithm, the MS frequency capability and the MS ciphering capability. Additional mobile info can be obtained by invoking the classmark interrogation procedure.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE TALKER INDICATION 3BK 11203 0138 DSZZA 570/639

6.65.3 MOBILE IDENTITY TYPE: M DEFINITION To provide either the IMSI, the TMSI or the IMEI. IMEISV is not used. Note IMSI 15 digits TMSI = 4 octets IMEI = 15 digits BIT DESCRIPTION 8 7 6 5 4 3 2 1

ID digit 1 ID digit 3 :

Length of Mobile Identity contents OEI

ID digit 2 :

Type of ID

ID digit p+1 SUB PARAMETER DEFINITION Type of ID: 001 IMSI 010 IMEI 011 IMEISV 100 TMSI 000 No identity other values reserved

ID digit P

Not used Not used Not used

OEI: Odd Even Indicator value 0: even number of identity digits (even for TMSI) 1: odd number of digits

Filled digit :1 1 1 1 Octet 2 For the IMSI and the IMEI this field is coded using BCD coding. If the number of identify digits is even then bits 5 to 8 of the last octet shall be filled with an end mark coded as '1111'. If the mobile identity is the TMSI then bits 5 to 8 of octet 2 is coded as '1111' and bit 8 of octet 3 is the most significant bit, and bit 1 of the last octet is the least significant bit. PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE TALKER INDICATION 3BK 11203 0138 DSZZA 571/639

6.66 UTRAN CLASSMARK CHANGE


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION RADIO FACCH/SDCCH 44.018 UTRAN CLASSMARK CHANGE ABIS Transparent NA A

This message is sent on the main DCCH by the mobile station to the network to indicate a UTRAN Classmark Change or as a response to a UTRAN classmark enquiry. From MS To BSS INFORMATION ELEMENT NAME TYPE M V M LV COMMENT LENGTH (byte) 2 2-n 4-n TIMER

INFORMATION ELEMENT LIST

Header UTRAN Classmark

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. ABNORMAL SITUATION

BSC will forward the value part to MSC when 2G3G HO is triggered. Classmark Handling [9]

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE UTRAN CLASSMARK CHANGE 3BK 11203 0138 DSZZA 572/639

6.66.1 GENERAL DESCRIPTION 8 7 6 5 4 3 2 1

0 1

0 1

0 0

0 0

1 0

1 0

0 0

UTRAN classmark

Length (=1-n) UTRAN Classmark value part

6.60.1 UTRAN CLASSMARK TYPE: M DEFINITION: The UTRAN classmark value part is the INTER RAT HANDOVER INFO. It is sent by the UE to provide information to the target RNC when preparing for a handover to UTRAN. BIT DESCRIPTION: The BSS handles this IE as an unstructured octet string, with a maximum length of n octets. SUB-PARAMETER DEFINITION: None PARAMETER ORIGIN - ACTION ON PARAMETER: This is the UTRAN classmark as sent by an UE with UTRAN capabilities. The BSC takes this information in order to forward it unchanged to the RNC (via the MSC) in HANDOVER REQUIRED message.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE UTRAN CLASSMARK CHANGE 3BK 11203 0138 DSZZA 573/639

6.67 UPLINK ACCESS


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION RADIO RACH 44.018 This message is sent in random mode on the voice group call channel uplink. It does not follow the basic format. From: MS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST To: BTS TYPE COMMENT LENGTH (byte) 1 1 TIMER _ UPLINK ACCESS ABIS A

See the next page

Unformatted 8 bit field

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. CHANNEL REQUIRED towards the BSC See ref [36] ABNORMAL SITUATION _

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE UPLINK ACCESS 3BK 11203 0138 DSZZA 574/639

6.67.1 GENERAL DESCRIPTION

Establ. Cause

Reference

Random

6.67.2 ESTABLISHMENT CAUSE AND RANDOM REFERENCE TYPE: M DEFINITION ESTABLISHMENT CAUSE (octet 1) It indicates the reason for requesting the establishment of a connection. This field has a variable length (from 3 bits up to 8 bits). RANDOM REFERENCE (octet 1) This is an unformatted field with variable length (from 5 bits down to 0 bits).

BIT DESCRIPTION The Uplink access message is coded as follows : (Random Reference field is filled with "x").
Message 87654321 Meaning of Establishment Cause

110xxxxx 00100101 other values

Subsequent talker uplink request Reply on uplink access request reserved for future use

PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE UPLINK ACCESS 3BK 11203 0138 DSZZA 575/639

6.68 UPLINK BUSY


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION RADIO FACCH 44.018 This message is broadcasted by the network in unacknowledged mode to inform the mobile station of the uplink status of the voice group call channel. From: BTS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST Header To: MS TYPE COMMEN T LENGTH (byte) 2 UPLINK BUSY ABIS A

IMPLEMENTATION LENGTH NORMAL SITUATION FOLLOWING EVENT ABNORMAL SITUATION

2 TIMER

SPECIF DOC. REF.

See ref [36]

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE UPLINK BUSY 3BK 11203 0138 DSZZA 576/639

6.68.1 GENERAL DESCRIPTION

Skip indicator & Protocol discriminator Message type

8 0

7 0

6 1

5 0

4 1

3 0

2 1

0 0

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE UPLINK BUSY 3BK 11203 0138 DSZZA 577/639

6.69 UPLINK FREE


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO FACCH 44.018 This message is sent in unacknowledged mode using the RR short protocol discriminator by the network to inform the mobile station of the uplink status of the voice group call channel. The message indicates the uplink as free unless the Uplink Access Request field indicates the uplink as not free. This message may also be used by the network to request the mobile station to perform an uplink reply procedure. From: BTS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST RR short PD Message type Short layer2 header Uplink access request (L/H) uplink identity code Spare To: MS TYPE COMMENT LENGTH (bits) 1 5 2 1 1-7 6-0 16 TIMER UPLINK FREE ABIS A

DIRECTION

M MV MV

Not used

IMPLEMENTATION LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. See ref [36] ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE UPLINK FREE 3BK 11203 0138 DSZZA 578/639

6.69.1 GENERAL DESCRIPTION 8 "short header" RR short PD Uplink access request 7 6 5 Message type L spare spare spare spare 4 3 2 1

Short layer 2 header spare spare

uplink identity code

6.69.2 UPLINK ACCESS REQUEST TYPE: M DEFINITION L H Mobile station shall not perform the uplink reply procedure; Mobile station shall perform the uplink reply procedure. When set to H, this element also indicates the uplink as not free for the uplink access procedure.

BIT DESCRIPTION One bit field

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE UPLINK FREE 3BK 11203 0138 DSZZA 579/639

6.70 UPLINK RELEASE


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO FACCH 44.018 This message is sent on the uplink of the voice group call channel to initiate a deactivation of the group transmit mode and to set the uplink free or on the uplink by a talker on the dedicated channel or on the downlink of the voice group call channel in order to reject an uplink access which was already granted by the network From: BTS To: MS From : MS To BTS INFORMATION ELEMENT NAME TYPE COMMENT LENGTH (byte) Header RR Cause MV IMPLEMENTATION LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. See ref [36] ABNORMAL SITUATION 2 1 3 TIMER UPLINK RELEASE ABIS A

DIRECTION

INFORMATION ELEMENT LIST

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE UPLINK RELEASE 3BK 11203 0138 DSZZA 580/639

6.70.1 GENERAL DESCRIPTION 8 0 RR Cause 0 7 0 0 6 0 0 5 0 0 4 0 1 3 1 1 2 1 1 1 0 0

RR CAUSE VALUE

6.70.2 RR CAUSE TYPE: M DEFINITION To provide the reason for release. BIT DESCRIPTION 8 7 6 RR CAUSE VALUE 5 4 3 2 1

SUB PARAMETER DEFINITION In the case when the message is sent by the network the cause is : Bits 87654321 0 0 0 0 0 0 0 0 Normal event. 0 0 0 0 0 0 0 1 Abnormal release, unspecified. 0 0 0 0 0 0 1 1 Abnormal release, timer expired. PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE UPLINK RELEASE 3BK 11203 0138 DSZZA 581/639

6.71 VGCS UPLINK GRANT


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO FACCH 44.018 This message is sent in unacknowledged mode on the main signalling channel by the network to the mobile station to stop the sending of access bursts from the mobile station and to change the channel configuration to a dedicated configuration. From: BSC INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST Header Request Reference Timing Advance To: MS TYPE COMMEN T LENGTH (byte) 2 3 1 VGCS UPLINK GRANT ABIS A

DIRECTION

MV MV

IMPLEMENTATION LENGTH NORMAL SITUATION FOLLOWING EVENT ABNORMAL SITUATION

6 TIMER T3115

SPECIF DOC. REF.

See ref [36]

6.71.1 GENERAL DESCRIPTION

8 0 0 ED EVOLIUM 05 RELEASED

7 0 0

6 0 0

5 0 0

4 0 1

3 1 0

2 1 0

1 0 1

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE VGCS UPLINK GRANT 3BK 11203 0138 DSZZA 582/639

Reference Timing Advance 0

Request

T3 Low part 0

T1'

RA T2

T3 High Part

Timing Advance Value

6.71.2 REQUEST REFERENCE TYPE: M DEFINITION To provide the random access number used in the channel request and the frame number, FN modulo 42432 in which the channel request was received. BIT DESCRIPTION 8 7 6 T1' T3 Low part SUB PARAMETER DEFINITION RA Random Number When set to the value 0111 1111, the RA information of the Request Reference IE indicates that an Extended RA field may be included in the IA Rest Octets. The mobile station shall use the information in the Extended RA field to identify the Immediate Assignment message corresponding to an EGPRS Packet Channel Request message. T1', T3, T2 Starting time information element T1': binary representation of (FN div 1326) mod 32 T3: " " FN mod 51 T2: " " FN mod 26 FN mod 42432 = 51 x ((T3 - T2) mod 26) + T3 + 51 x 26 x T1' In case the IMMEDIATE ASSIGNMENT message conveys a downlink TBF establishment, the RA bits are set to 101xxxxx to avoid that a MS considers the message as an answer to a request sent on the RACH channel. PARAMETER ORIGIN - ACTION ON PARAMETER RA: This information comes from the MS in Channel Required message addressed by the BTS. It is used to allow the MS to recognise its own request among those sent by the BSC at the same time. T1', T3, T2 are also stored from Channel Required message Time of arrival (in terms of Frame Number) of the Access Burst given by the BTS in the Channel Required message. LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE VGCS UPLINK GRANT 3BK 11203 0138 DSZZA 583/639 5 4 3 2 T3 High part 1

RA

T2

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

6.71.3 TIMING ADVANCE TYPE: M DEFINITION To provide Timing Advance value BIT DESCRIPTION 8 0 Bits 7, 8 are spare bits. SUB PARAMETER DEFINITION Binary representation of the timing advance in bit periods (1 bit period 48/13 s). 7 0 6 5 4 3 2 1

Timing Advance Value

PARAMETER ORIGIN - ACTION ON PARAMETER The access delay is stored by the BSC and sent to the MS as Timing advance.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE VGCS UPLINK GRANT 3BK 11203 0138 DSZZA 584/639

7 7.1

RADIO INTERFACE MESSAGES FOR SMSCB MESSAGE BLOCKS


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO CBCH 24.012 A CB message consists of a 88 octets of information. The 88 octet block is segmented into four 22 octet blocks. A 1 octet Block type is added as a header to each 22 octet block. The overall blocks are thus 23 octets in length. The message blocks are sent on the CBCH by the network to all the Mobile Stations which are in idle mode in the cell. SMSCB message carries one page of CB information message (made of up to 15 pages) which may come from different sources and gives information (eg. traffic or weather reports) to the MS of a geographical area. From: BTS INFORMATION ELEMENT NAME To: MS TYPE COMMENT LENGTH MESSAGE BLOCKS ABIS BTS Transparent A

DIRECTION

INFORMATION ELEMENT LIST

See following pages for the description. IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION ABNORMAL SITUATION 92 TIMER

FOLLOWING EVENT SPECIF DOC. REF. SMSCB (ref. [23])

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE MESSAGE BLOCKS 3BK 11203 0138 DSZZA 585/639

7.1.1 7.1.1.1

GENERAL DESCRIPTION Normal message blocks 8 Spare 0 7 0 LPD 6 1 5 LB 0 4 0 3 0 2 0 1 0 octet 1 octet 2 octet 23 octet 24 octet 25 octet 46 octet 47 octet 48 octet 69 octet 70 octet 71 octet 92

Sequence Number

First Block

SMSCB INFORMATION Spare LPD 0 1 LB 0 0 Sequence Number 0 0 1

Second Block

SMSCB INFORMATION Spare Third Block 0 0 LPD 1 LB 0 0 Sequence Number 0 1 0

SMSCB INFORMATION Spare Fourth Block 0 0 LPD 1 LB 1 0 Sequence Number 0 1 1

SMSCB INFORMATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE MESSAGE BLOCKS 3BK 11203 0138 DSZZA 586/639

7.1.1.2

Schedule message blocks 8 Spare 0 7 0 LPD 6 1 5 LB 0 4 1 3 0 2 0 1 0 octet 1 octet 2 octet 23 octet 24 octet 25 octet 46 octet 47 octet 48 octet 69 octet 70 octet 71 octet 92

Sequence Number

First Schedule Block

SCHEDULE MESSAGE Spare LPD 0 1 LB 0 0 Sequence Number 0 0 1

Second Block

SCHEDULE MESSAGE Spare Third Block 0 0 LPD 1 LB 0 0 Sequence Number 0 1 0

SCHEDULE MESSAGE Spare Fourth Block 0 0 LPD 1 LB 1 0 Sequence Number 0 1 1

SCHEDULE MESSAGE

7.1.1.3

Null message blocks

The four Null message blocks are the same and consist of 1 header octet and followed by 22 octets padded with 2B. 8 Spare Null Block 0 0 7 0 LPD 6 1 5 LB 0 4 1 3 1 2 1 1 1 octet 1 octet 2

Sequence Number 0 1

Padding

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE MESSAGE BLOCKS 3BK 11203 0138 DSZZA 587/639

octet 23

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE MESSAGE BLOCKS 3BK 11203 0138 DSZZA 588/639

7.1.2 BLOCK TYPE TYPE: M DEFINITION Identifies a particular CB information block (22 octets) BIT DESCRIPTION Spare 0 8 7 0 LPD 6 1 LB 5 4 Sequence Number 3 2 1

SUB PARAMETER DEFINITION LPD: Link Protocol Discriminator of Cell Broadcast and is set to the value 01 LB Last Block bit indicator. When LB is set to 0, the next block may contain information. When the LB bit is set to 1, the remain block(s) do(es) not contain SMSCB Information. 0000: First Block 0001: Second Block 0010: Third Block 0011: Fourth Block; 1000: First Schedule Block; 1111: Null Block.

Sequence Number:

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE MESSAGE BLOCKS 3BK 11203 0138 DSZZA 589/639

7.2

NAME

SMSCB SCHEDULE MESSAGE


RADIO CBCH 24.012

SMSCB SCHEDULE MESSAGE ABIS BTS Transparent A

INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION

This message gives information relating to the CB information messages sent immediately afterwards when DRX is activated. From: BTS INFORMATION ELEMENT NAME To: MS TYPE M M O O O V V V V V COMMENT LENGTH (byte) 2 6 2-80 1-80 1-21 88 TIMER

INFORMATION ELEMENT LIST

Schedule message header New CBSMS Message Bitmap New CBSMS Message Description Other Message Descriptions Padding

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. SMSCB (ref. [23]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SMSCB SCHEDULE MESSAGE 3BK 11203 0138 DSZZA 590/639

7.2.1 7.2.1.1

GENERAL DESCRIPTION Schedule Message 8 7 6 5 4 3 2 1

Schedule message header New CBSMS Message Bitmap

Type 0 0 spare spare 0 0 NM 1 NM 2 1 :

Begin Slot Number = 1

octet 1 octet 2

End Slot Number = SCHEDULE_PERIOD NM 3 NM 4 NM 5 NM 6 NM 7 NM 8 :

octet 3

NM 41 MDT 1 : MDT 1

NM 42

NM 43

NM 44

NM 45

NM 46

NM 47

NM 48

octet 8 octet 9 octet 10

Message Identifier (High) Message Identifier (Low) Message Identifier (High) Message Identifier (Low) 0 Repeated Message Slot Number : :

New CBSMS Message Description

0 :

MDT

Other Message Descriptions

MDT 1 : MDT 1 MDT

Message Identifier (High) Message Identifier (Low) Message Identifier (High) Message Identifier (Low) 0 0 0 0 1 1 1 Repeated Message Slot Number

0 0 Padding 0 : 0 :

0 0

1 1

0 0

1 1

1 : 1 Note 1

Note 1:

Octet 22, if the first block does not fill the 22 bytes; Octet 44, if the second block does not fill the 22 bytes; Octet 66, if the third block does not fill the 22 bytes; Octet 88, if the fourth block does not fill the 22 bytes. LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SMSCB SCHEDULE MESSAGE 3BK 11203 0138 DSZZA 591/639

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

7.2.1.2

Unscheduled Schedule Message

The unscheduled schedule message differs from the schedule message only with Begin Slot Number which should be in range [2, SP]. 8 Schedule message header 7 6 5 4 3 2 1 octet 1 octet 2 NM 7 NM 47 NM 8 NM 48 : octet 3 octet 8 octet 9 octet 10 :

New CBSMS Message Bitmap

NM 41 MDT 1 :

Type 0 0 spare spare 0 0 NM 1 NM 2 0 :

Begin Slot Number > 1 End Slot Number NM 3 NM 43 NM 4 NM 44 NM 5 NM 45 NM 6 NM 46

NM 42

Message Identifier (High) Message Identifier (Low) Message Identifier (High) Message Identifier (Low) 0 Repeated Message Slot Number :

New CBSMS Message Description

MDT 1 MDT

0 :

Other Message Descriptions

MDT 1 :

Message Identifier (High) Message Identifier (Low) Message Identifier (High) Message Identifier (Low) 0 0 0 0 1 1 0 0 0 Padding 0 1 1 Repeated Message Slot Number 0 0 0 0 1 1

MDT 1 MDT

0 0 Padding 0 : :

1 1 1 : Note 1 :

Note 1:

Octet 22, if the first block does not fill the 22 bytes; Octet 44, if the second block does not fill the 22 bytes; Octet 66, if the third block does not fill the 22 bytes; Octet 88, if the fourth block does not fill the 22 bytes. LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SMSCB SCHEDULE MESSAGE 3BK 11203 0138 DSZZA 592/639

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

7.2.1.3

Null Message transmission 8 7 6 5 4 3 2 1 octet 1 octet 2 NM 7 0 NM 8 0 : NM 42 0 1 NM 43 0 0 NM 44 NM 45 0 0 MDT 0 0 NM 46 0 0 NM 47 0 0 NM 48 0 0 : 1 0 0 1 0 0 0 1 0 0 0 1 0 1 : 0 1 0 1 0 1 1 (Note 2)


octet SP+9 (Note 1)

Schedule message header

New CBSMS Message Bitmap

Type 0 0 spare spare 0 0 NM 1 NM 2 0 0 : NM 41 0 0 : 0

Begin Slot Number = 1 End Slot Number NM 3 0 NM 4 0 NM 5 0 NM 6 0

octet 3

octet 8 octet 9

New CBSMS Message Description

Padding

0 : 0

octet SP+10

Note 1: Note 2:

SP (Schedule Period), the maximum value is 40 Octet 22, if the first block does not fill the 22 bytes; Octet 44, if the second block does not fill the 22 bytes; Octet 66, if the third block does not fill the 22 bytes;

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SMSCB SCHEDULE MESSAGE 3BK 11203 0138 DSZZA 593/639

7.2.2 SCHEDULE MESSAGE HEADER TYPE: M DEFINITION Indicates the Schedule Message Type and defines the Schedule Period. BIT DESCRIPTION Type 0 0 spare spare 0 0 SUB PARAMETER DEFINITION Type: Schedule Message Type is always set to 0 0. Begin Slot Number: First message slot number relative to the Schedule Period following the Schedule Message. The Begin Slot Number field is coded in binary. Value range: 1 to 48. End Slot Number: Last message slot number relative to the Schedule Period following the Schedule Message. The End Slot Number field is coded in binary, and its value must be greater than or equal to the value of Begin Slot Number. Value range: 1 to 48. PARAMETER ORIGIN - ACTION ON PARAMETER 8 7 6 5 Begin Slot Number End Slot Number 4 3 2 1

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SMSCB SCHEDULE MESSAGE 3BK 11203 0138 DSZZA 594/639

7.2.3 NEW CBSMS MESSAGE BITMAP TYPE: M DEFINITION Defines the contents of message slots of the Schedule Period described in the Schedule Message. BIT DESCRIPTION NM 1 NM 17 NM 25 NM 33 NM 41 NM 9 8 NM 2 7 NM 3 6 NM 4 5 NM 5 4 NM 6 3 NM 7 2 NM 8 1

NM 18 NM 26 NM 34 NM 42

NM 10

NM 19 NM 27 NM 35 NM 43

NM 11

NM 20 NM 28 NM 36 NM 44

NM 12

NM 21 NM 29 NM 37 NM 45

NM 13

NM 22 NM 30 NM 38 NM 46

NM 14

NM 23 NM 31 NM 39 NM 47

NM 15

NM 24 NM 32 NM 40 NM 48

NM 16

SUB PARAMETER DEFINITION NM i: The New Message bit i refers to the content of message slot i. Its meaning is as follows: 1 The message slot contains an SMSCB message page which was either not sent during the previous schedule period, or sent unscheduled during the preceding schedule period; or, the message is indicated as of free usage, reading advised. The value is 1 both for the first transmission of a given SMSCB message page in the schedule period or a repetition of it within the schedule period. 0 The message slot is such that value 1 is not suitable. PARAMETER ORIGIN - ACTION ON PARAMETER

7.2.4 NEW CBSMS MESSAGE DESCRIPTION TYPE: O DEFINITION Contains as many Message Descriptions as there are bits set to 1 in the New CBSMS Message Bitmap. A Message Description is 1 or 2 octets long.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SMSCB SCHEDULE MESSAGE 3BK 11203 0138 DSZZA 595/639

BIT DESCRIPTION First transmission of an SMSCB within the Schedule Period MDT 1 8 7 6 Message Identifier (high part) 5 4 3 2 1 Octet 1 Octet 2

Message Identifier (low part) Retransmission indication 8 0 MDT 7 0 6 5 4 3 2 1

Repeated Message Slot Number

Octet 1

Free Message Slot, optional reading 8 0 7 1 6 0 5 0 MDT 4 0 3 0 2 0 1 0 1

Free Message Slot, reading advised 8 0 7 1 6 0 5 0 MDT 4 0 3 0 2 0 1 1 1

SUB PARAMETER DEFINITION MDT: Message Description Type: 1: First transmission of the SMSCB within the Schedule Period, 0 0: SMSCB message retransmission indication, 01000000 Free Message Slot, optional reading, 01000001 Free Message Slot, reading advised.

Message Identifier: made of the lower 15 bits of the corresponding Message Identifier field of the SMSCB message. Repeated Message Slot Number: Message slot number of the first transmission during the Schedule Period of the repeated SMSCB message. Value range 1 to 47. PARAMETER ORIGIN - ACTION ON PARAMETER

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SMSCB SCHEDULE MESSAGE 3BK 11203 0138 DSZZA 596/639

7.2.5 OTHER MESSAGE DESCRIPTIONS TYPE: O DEFINITION Contains as many Message Descriptions as there are bits set to 0 in the Schedule Period defined in the New CBSMS Message Bitmap. A Message Description is 1 or 2 octets long.

BIT DESCRIPTION

First transmission of an SMSCB within the Schedule Period MDT 1 8 7 6 Message Identifier (high part) 5 4 3 2 1 Octet 1 Octet 2

Message Identifier (low part) Retransmission indication 8 0 MDT 7 0 6 5 4 3 2 1

Repeated Message Slot Number

Octet 1

Free Message Slot, optional reading 8 0 7 1 6 0 5 0 MDT 4 0 3 0 2 0 1 0 1

Free Message Slot, reading advised 8 0 7 1 6 0 5 0 MDT 4 0 3 0 2 0 1 1 1

SUB PARAMETER DEFINITION MDT: Message Description Type: 1: First transmission of the SMSCB within the Schedule Period, 0 0: SMSCB message retransmission indication, 01000000 Free Message Slot, optional reading, 01000001 Free Message Slot, reading advised.

PARAMETER ORIGIN - ACTION ON PARAMETER

Message Identifier: made of the lower 15 bits of the corresponding Message Identifier field of the SMSCB message. Repeated Message Slot Number: Message slot number of the first transmission during the schedule period of the repeated SMSCB message. Value range 1 to 47.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE SMSCB SCHEDULE MESSAGE 3BK 11203 0138 DSZZA 597/639

Only the general overview is described in this document for the (E)GPRS messages. The description of the information elements contained in the message is available in the relevant ALCATEL document identified by the SPECIF. DOC. REF. field of the general overview description, and in the relevant 3GPP technical specification referenced by the 3GPP-REF field of the general overview description.

RADIO INTERFACE MESSAGES FOR (E)GPRS

8.1

RLC/MAC block structure

8.1.1 GPRS RLC/MAC block structure A GPRSRLC/MAC block consists of a MAC header and a RLC data block or RLC/MAC control block. The GPRS RLC/MAC block structure is shown below.
RLC/MAC block MAC header RLC hdr RLCdata unit RLC data block spare

RLC/MAC block MAC header Ctrl hdr RLC/MACsignalling RLC/MAC control block

8.1.2 E-GPRS RLC/MAC block structure An E-GPRS RLC/MAC block consists of a RLC/MAC header and a RLC data block or RLC/MAC control block. The E-GPRS RLC/MAC block structure is shown below.
E-GPRS RLC/MAC data block RLC / MAC header RLC data block 1 RLC data block 2 (conditional)

E-GPRS RLC/MAC control block MAC header Ctrl header RLC/ MAC sig

8.1.3

RLC data blocks

8.1.3.1 GPRS RLC data blocks The RLC data block consists of an RLC header, an RLC data unit, and spare bits. An RLC/MAC block containing an RLC data block may be encoded using either channel coding scheme CS-1, CS-2, CS-3 ED EVOLIUM 05 RELEASED LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE RLC/MAC BLOCK STRUCTURE 3BK 11203 0138 DSZZA 598/639

0138_05.doc 15/02/2008

or CS-4. RLC/MAC blocks encoded using CS-1 do not contain spare bits. The size of the RLC data block for each of the channel coding schemes is shown below. RLC data Channel Coding block size Scheme without spare bits (octets) CS-1 22 CS-2 32 CS-3 38 CS-4 52 Number of spare bits 0 7 3 7 RLC data block size (octets) 22 32 + 7/8 38 + 3/8 52 + 7/8

RLC data block size


8.1.3.1.1 Downlink GPRS RLC data blocks The Downlink RLC data block together with its MAC header is formatted as shown below. 8 7 Payload Type PR 6 5 RRBP Bit 4 S/P TFI M 3 2 USF 1

MAC header

BSN Length indicator . . . Length indicator

RLC data

spare

spare

FBI Octet 1 E Octet 2 E Octet 3 (optional) . . . E Octet M (optional) Octet M+1 . . . Octet N-1 Octet N (if present)

See ref. [30] FBS GPRS - Radio interface - RLC sublayer for the semantic and the use of all information elements.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE RLC/MAC BLOCK STRUCTURE 3BK 11203 0138 DSZZA 599/639

8.1.3.1.2 Uplink GPRS RLC data blocks The Uplink RLC data block together with its MAC header is formatted as shown below. 8 7 Payload Type spare 6 Bit 5 4 3 Countdown Value TFI M 2 SI 1 R TI E E

MAC header Octet 1 Octet 2 Octet 3 (optional) . . . Octet M (optional) Octet M+1 \ Octet M+2 } (optional) Octet M+3 / Octet M+4 / Octet M+5 (M+1 if no TLLI) . . . Octet N-1 Octet N (if present)

BSN Length indicator . . . Length indicator

TLLI

RLC data

spare

spare

See ref. [30] FBS GPRS - Radio interface - RLC sublayer for the semantic and the use of all information elements. 8.1.3.2 EGPRS RLC data blocks The EGPRS RLC data block consists of a FBI (downlink) or TI (uplink) field and an E field followed by an EGPRS RLC data unit The EGPRS RLC data unit is a sequence of N2 octets that are numbered from 1 to N2. EGPRS RLC data blocks can be encoding using channel modulation and coding schemes MCS-1 to MCS-9. The size of the EGPRS RLC data unit for each of the channel coding schemes is shown in the table below.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE RLC/MAC BLOCK STRUCTURE 3BK 11203 0138 DSZZA 600/639

Channel Coding Scheme

MCS-1 MCS-2 MCS-3 MCS-4 MCS-5 MCS-6 MCS-7 MCS-8 MCS-9

EGPRS RLC data unit size (N2) (octets)

Family

Comment

22 28 37 44 56 74 2x56 2x68 2x74

C B A C B A B A A

supported only in DL supported only in DL supported only in DL supported only in DL supported only in DL

8.1.3.2.1 Downlink EGPRS RLC data blocks The EGPRS downlink RLC data blocks are formatted as follows : 2 FBI Bit 1 E

Bit 6 5 4 Length indicator . . . Length indicator RLC data

1 E

Octet 1 (note 1) (optional) . . . Octet M (optional) Octet M+1 . . . Octet N2-1 Octet N2

8.1.3.2.2 Downlink EGPRS RLC/MAC header Header type 1: header for MCS-7, MCS-8 and MCS-9 : The EGPRS combined downlink RLC/MAC header for MCS-7, MCS-8 and MCS-9 (header type 1) is formatted as described below. Bit 8 7 6 5 4 3 2 1 Octet TFI RRBP ES/P USF 1 BSN1 PR TFI 2 BSN1 3 BSN2 BSN 4 1 CPS BSN2 5 Header type 2: header for MCS-6 and MCS-5 : The EGPRS combined downlink RLC/MAC header for MCS-5 and MCS-6 (header type 2) is formatted as follows :

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE RLC/MAC BLOCK STRUCTURE 3BK 11203 0138 DSZZA 601/639

Bit 8 7 6 5 4 TFI RRBP ES/P BSN1 PR BSN1

2 USF TFI

CPS

BSN 1

Octet 1 2 3 4

Header type 3: header for MCS-4, MCS-3, MCS-2 and MCS-1 case The EGPRS combined downlink RLC/MAC header for MCS-1, MCS-2, MCS-3 and MCS-4 (header type 3) is formatted as follows : Bit 8 7 6 5 4 3 2 1 Octet TFI RRBP ES/P USF 1 BSN1 PR TFI 2 BSN1 3 SPB CPS BSN 4 1 See ref. [30] FBS GPRS - Radio interface - RLC sublayer for the semantic and the use of all information elements. 8.1.3.2.3 Uplink EGPRS RLC/MAC header Header type 3 : header for MCS-4, MCS-3, MCS-2 and MCS-1 The EGPRS combined uplink RLC/MAC header for MCS-1, MCS-2, MCS-3 and MCS-4 (header type 3) is formatted as follows : Bit 8 7 6 5 4 3 2 1 Octet TFI Countdown Value SI R 1 BSN1 TFI 2 CPS BSN1 3 Spar PI RSB SPB CPS 4 e See ref. [30] FBS GPRS - Radio interface - RLC sublayer for the semantic and the use of all information elements. Note : MCS-5 to MCS-9 are not supported in Uplink. Corresponding RLC/MAC headers are therefore not described. 8.1.3.2.4 Uplink EGPRS RLC data blocks The EGPRS uplink RLC data block are formatted as follows :

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE RLC/MAC BLOCK STRUCTURE 3BK 11203 0138 DSZZA 602/639

2 TI

Bit

1 E

Bit 6 5 4 Length indicator . . . Length indicator TLLI

1 E

PFI RLC data

Octet 1 (note 1) (optional) . . . Octet M (optional) Octet M+1 \ Octet M+2 } (optional) Octet M+3 / Octet M+4 / Octet M + 5 / Octet M+6 . . . Octet N2-1 Octet N2

See ref. [30] FBS GPRS - Radio interface - RLC sublayer for the semantic and the use of all information elements.

8.1.4 (E)GPRS RLC/MAC control blocks The (E)GPRS RLC/MAC control block consists of a control message contents field and in the downlink direction an optional control header. (E)GPRS RLC/MAC control messages shall be transported within RLC/MAC control blocks. An RLC/MAC control block is always encoded using the coding scheme CS-1. 8.1.4.1 Downlink (E)GPRS RLC/MAC control blocks The Downlink RLC/MAC control block together with its MAC header is formatted as shown below. 8 7 Payload Type Spare 6 5 RRBP Bit 4 S/P TFI Control Message Contents 3 2 USF 1 D

MAC header Octet 1 (optional) Octet M . . . Octet 21 Octet 22

See ref. [31] FBS GPRS - Radio interface - RLC sublayer for the semantic and the use of all information elements.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE RLC/MAC BLOCK STRUCTURE 3BK 11203 0138 DSZZA 603/639

8.1.4.2 Uplink (E)GPRS RLC/MAC control blocks The Downlink RLC/MAC control block together with its MAC header is formatted as shown below. 8 7 Payload Type 6 5 Bit 4 spare 3 2 1 R

MAC header Octet 1 Octet 2 Octet 3 . Octet 21 Octet 22

Control Message Contents

. .

See ref. [30] FBS GPRS - Radio interface - RLC sublayer for the semantic and the use of all information elements.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE RLC/MAC BLOCK STRUCTURE 3BK 11203 0138 DSZZA 604/639

8.2

NAME

EGPRS PACKET DOWNLINK ACK/NACK


RADIO PACCH 44.060

EGPRS PACKET DOWNLINK ACK/NACK ABIS A

INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION

This message is sent by the E-GPRS mobile station to the network on its PACCH to indicate the status of the downlink RLC data blocks received and to report the channel quality of the downlink path. The mobile station may optionally initiate an uplink TBF.

DIRECTION

From: MS INFORMATION ELEMENT NAME

To: BTS TYPE MV MV COMMENT LENGTH (byte) 1 22 23 TIMER

INFORMATION ELEMENT LIST

MAC header Control message contents

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT Receive window is updated. Not received blocks are retransmitted. Downlink path quality is assessed. Optionally an uplink TBF is established. FBS GPRS - Radio interface - RRM sublayer - PCC (ref. [29]) ABNORMAL SITUATION

SPECIF DOC. REF.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE EGPRS PACKET DOWNLINK ACK/NACK 3BK 11203 0138 DSZZA 605/639

8.3

NAME

PACKET ACCESS REJECT


RADIO PCCCH or PACCH 44.060

PACKET ACCESS REJECT ABIS A

INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION

This message is sent on the PCCCH or PACCH by the network to the mobile station to indicate that the network has rejected the MSs access request. More than one mobile station may be addressed simultaneously by the same message. From: BTS INFORMATION ELEMENT NAME To: MS TYPE MV MV COMMENT LENGTH (bit) 8 25 or 47 or 51 59 TIMER

DIRECTION

INFORMATION ELEMENT LIST

MAC header Control message contents

IMPLEMENTATION MAXIMUM LENGTH (bit) NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. FBS GPRS - Radio Interface - RRM sublayer - PCC (ref. [29]) FBS GPRS - Radio interface - MAC sublayer (ref. [31]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET ACCESS REJECT 3BK 11203 0138 DSZZA 606/639

8.4

PACKET CELL CHANGE CONTINUE


NAME PACKET CELL CHANGE CONTINUE RADIO PACCH 44.060 This message is sent by the network to the mobile station to command the mobile station to continue the cell reselection procedure. From: BTS To: MS INFORMATION ELEMENT NAME TYPE MV MV COMMENT LENGTH (byte) 1 22 23 TIMER ABIS A

INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION

INFORMATION ELEMENT LIST

MAC header Control message contents

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. FBS GPRS - Radio interface - RRM sublayer - PCC (ref. [29]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET CELL CHANGE CONTINUE 3BK 11203 0138 DSZZA 607/639

8.5

NAME

PACKET CELL CHANGE FAILURE


RADIO PACCH 44.060

PACKET CELL CHANGE FAILURE ABIS A

INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION

This message is sent by the mobile station to the network on its PACCH to indicate indicate that a commanded cell change order has failed. From: MS To: BTS INFORMATION ELEMENT NAME TYPE MV MV COMMENT LENGTH (byte) 1 22 23 TIMER

INFORMATION ELEMENT LIST

MAC header Control message contents

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. FBS GPRS - Radio interface - RRM sublayer - PCC (ref. [29]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET CELL CHANGE FAILURE 3BK 11203 0138 DSZZA 608/639

8.6

PACKET CELL CHANGE NOTIFICATION


NAME PACKET CELL CHANGE NOTIFICATION RADIO PACCH 44.060 This message is sent by the mobile station to the network to inform the network that the cell re-selection criteria are now fulfilled and that the mobile station has entered CCN mode From: MS To: BTS INFORMATION ELEMENT NAME TYPE MV MV COMMENT LENGTH (byte) 1 22 23 TIMER ABIS A

INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION

INFORMATION ELEMENT LIST

MAC header Control message contents

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. FBS GPRS - Radio interface - RRM sublayer - PCC (ref. [29]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET CELL CHANGE NOTIFICATION 3BK 11203 0138 DSZZA 609/639

8.7

NAME

PACKET CELL CHANGE ORDER


RADIO PACCH 44.060

PACKET CELL CHANGE ORDER ABIS A

INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION

This message is sent on the PACCH by the network to the mobile station to command the mobile station to leave the current cell and change to a new cell. From: BTS INFORMATION ELEMENT NAME To: MS TYPE MV MV COMMENT LENGTH (byte) 1 22 23 TIMER

INFORMATION ELEMENT LIST

MAC header Control message contents

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. ABNORMAL SITUATION

FBS GPRS - Radio interface - RRM sublayer - PCC

(ref. [29])

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET CELL CHANGE ORDER 3BK 11203 0138 DSZZA 610/639

8.8

NAME

PACKET CONTROL ACKNOWLEDGMENT


RADIO PACCH 44.060

PACKET CONTROL ACKNOWLEDGMENT ABIS A

INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION

This message is sent on the PACCH by the mobile station to the network as an answer to a polling request sent by the network in a previous downlink RLC/MAC control block through the RRBP mechanism. The message is formatted as 4 identical access bursts. The access burst format is 8 bits long (the 11 bits format is not implemented).

DIRECTION

From: MS INFORMATION ELEMENT NAME

To: BTS TYPE MV MV COMMENT LENGTH (bit) 6 2 8 TIMER

INFORMATION ELEMENT LIST

Message_type CTRL_ACK

IMPLEMENTATION MAXIMUM LENGTH (bit) NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. The on-going procedure (e.g. TBF establishment) is continued. ABNORMAL SITUATION The on-going procedure (e.g. TBF establishment) is stopped and potentially restarted.

FBS GPRS - Radio Interface - RRM sublayer - PCC (ref. [29]) FBS GPRS - Radio interface - RLC sublayer (ref. [30]) FBS GPRS - Radio interface - MAC sublayer (ref. [31])

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET CONTROL ACKNOWLEDGEMENT 3BK 11203 0138 DSZZA 611/639

8.9

PACKET CHANNEL REQUEST


NAME PACKET CHANNEL REQUEST RADIO PRACH 44.060 In a cell configured with a PBCCH channel, this message is sent by the mobile station on the PRACH to perform an uplink access. The message is 8 or 11 bits long. ABIS A

INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION

DIRECTION

From: MS INFORMATION ELEMENT NAME

To: BTS TYPE COMMENT LENGTH (bit)

INFORMATION ELEMENT LIST

See 3GPP-REF. IMPLEMENTATION MAXIMUM LENGTH (bit) NORMAL SITUATION ABNORMAL SITUATION 11 TIMER

FOLLOWING EVENT SPECIF DOC. REF.

Establishment of an on-going TBF or allocation of one uplink radio block FBS GPRS - Radio Interface - RRM sublayer - PCC (ref. [29]) FBS GPRS - Radio interface - MAC sublayer (ref. [31])

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET CHANNEL REQUEST 3BK 11203 0138 DSZZA 612/639

8.10 PACKET DOWNLINK ACK/NACK


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO PACCH 44.060 This message is sent by the mobile station to the network on its PACCH to indicate the status of the downlink RLC data blocks received and to report the channel quality of the downlink path. The mobile station may optionally initiate an uplink TBF. DIRECTION From: MS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST MAC header Control message contents To: BTS TYPE MV MV COMMENT LENGTH (byte) 1 22 23 TIMER PACKET DOWNLINK ACK/NACK ABIS A

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT Receive window is updated. Not received blocks are retransmitted. Downlink path quality is assessed. Optionally an uplink TBF is established. FBS GPRS - Radio interface - RLC sublayer (ref. [30]) FBS GPRS - Radio interface - RRM sublayer - PCC (ref. [29]) ABNORMAL SITUATION

SPECIF DOC. REF.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET DOWNLINK ACK/NACK 3BK 11203 0138 DSZZA 613/639

8.11 PACKET DOWNLINK ASSIGNMENT


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO PCCCH or PACCH 44.060 This message is sent by the network to the mobile station on PCCCH or PACCH to assign downlink resources to the mobile station. From: BTS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST MAC header Control message contents To: MS TYPE MV MV COMMENT LENGTH (byte) 1 22 23 TIMER PACKET DOWNLINK ASSIGNMENT ABIS A

DIRECTION

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT A polling request is sent to the mobile station with the Packet Downlink Assignment message. A Packet Control Acknowledgment message is expected from the MS. FBS GPRS - Radio interface - RRM sublayer - PCC (ref. [29]) ABNORMAL SITUATION

SPECIF DOC. REF.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET DOWNLINK ASSIGNMENT 3BK 11203 0138 DSZZA 614/639

8.12 PACKET DOWNLINK DUMMY CONTROL BLOCK


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION PACKET DOWNLINK DUMMY CONTROL BLOCK RADIO PCCCH or PACCH 44.060 This message is sent by the network to the mobile station on PCCCH or PACCH as a fill message with the allocated USF for the corresponding uplink block in case there is no on-going downlink data transfer or in case of Ater desynchronization between the BTS and the MFS. From: BTS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST MAC header Control message contents To: MS TYPE MV MV COMMENT LENGTH (byte) 1 22 23 TIMER ABIS A

DIRECTION

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. FBS GPRS - Radio interface - MAC sublayer (ref. [31]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET DOWNLINK DUMMY CONTROL BLOCK 3BK 11203 0138 DSZZA 615/639

8.13 PACKET UPLINK DUMMY CONTROL BLOCK


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO PACCH 44.060 ABIS

PACKET UPLINK DUMMY CONTROL BLOCK A

This message is sent by the mobile station to the network on PACCH when it has no other block to transmit. From: MS INFORMATION ELEMENT NAME To: BTS TYPE MV MV COMMENT LENGTH (byte) 1 22 23 TIMER

DIRECTION

INFORMATION ELEMENT LIST

MAC header Control message contents

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT In case too many consecutives Packet Uplink Dummy Control blocks are received, the uplink TBF of the MS is aborted. FBS GPRS - Radio interface - RLC sublayer (ref. [30]) ABNORMAL SITUATION

SPECIF DOC. REF.

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET UPLINK DUMMY CONTROL BLOCK 3BK 11203 0138 DSZZA 616/639

8.14 PACKET MEASUREMENT ORDER


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION RADIO PACCH 44.060

PACKET MEASUREMENT ORDER ABIS A

This message is sent on the PACCH by the network to a mobile station giving information for NC and EXT measurement reporting and network controlled cell reselection. From: BTS To: MS INFORMATION ELEMENT NAME TYPE MV MV COMMENT LENGTH (byte) 1 22 23 TIMER

INFORMATION ELEMENT LIST

MAC header Control message contents

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. ABNORMAL SITUATION

FBS GPRS - Radio interface - RRM sublayer - PCC

(ref. [29])

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET MEASUREMENT ORDER 3BK 11203 0138 DSZZA 617/639

8.15 PACKET MEASUREMENT REPORT


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION RADIO PACCH 44.060

PACKET MEASUREMENT REPORT ABIS A

This message is sent on the PACCH from the mobile station to the network to report measurement results. From: MS INFORMATION ELEMENT NAME To: BTS TYPE MV MV COMMENT LENGTH (byte) 1 22 23 TIMER

INFORMATION ELEMENT LIST

MAC header Control message contents

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. FBS GPRS - Radio interface - RRM sublayer - PCC (ref. [29]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET MEASUREMENT REPORT 3BK 11203 0138 DSZZA 618/639

8.16 PACKET MOBILE TBF STATUS


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO PACCH 44.060 This message is sent by the mobile station to the network on PACCH to indicate that an erroneous message has been received related to either a downlink or an uplink TBF. From: MS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST MAC header Control message contents To: BTS TYPE MV MV COMMENT LENGTH (byte) 1 22 23 TIMER PACKET MOBILE TBF STATUS ABIS A

DIRECTION

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. An error counter is incremented in RLC layer. FBS GPRS - Radio interface - RLC sublayer (ref. [30]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET MOBILE TBF STATUS 3BK 11203 0138 DSZZA 619/639

8.17 PACKET NEIGHBOUR CELL DATA


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION RADIO PACCH 44.060 This optional message is sent by the network to provide system information required for initial access in a neighbouring cell. From: BTS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST MAC header Control message contents To: MS TYPE MV MV COMMENT LENGTH (byte) 1 22 23 TIMER PACKET NEIGHBOUR CELL DATA ABIS A

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. FBS GPRS - Radio interface - RRM sublayer - PCC (ref. [29]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET NEIGHBOUR CELL DATA 3BK 11203 0138 DSZZA 620/639

8.18 PACKET PAGING REQUEST


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO PCCCH 44.060 This message is sent by the network on PCCCH or PACCH to trigger channel access by up to four mobile stations, for either TBF or RR connection establishment. From: BTS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST MAC header Control message contents To: MS TYPE MV MV COMMENT LENGTH (byte) 1 22 23 TIMER PACKET PAGING REQUEST ABIS A

DIRECTION

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. FBS GPRS - Radio interface - RRM sublayer - PCC (ref. [29]) FBS GPRS - Radio interface - MAC sublayer (ref. [31]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET PAGING REQUEST 3BK 11203 0138 DSZZA 621/639

8.19 PACKET PDCH RELEASE


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO PACCH 44.060 This message is sent by the network on PACCH to notify all mobile stations listening to that PDCH that one or more PDCHs will be immediatly released and become unavailable for packet data traffic. From: BTS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST MAC header Control message contents To: MS TYPE MV MV COMMENT LENGTH (byte) 1 22 23 TIMER PACKET PDCH RELEASE ABIS A

DIRECTION

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. FBS GPRS - Radio interface - RRM sublayer - PCC (ref. [29]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET PDCH RELEASE 3BK 11203 0138 DSZZA 622/639

8.20 PACKET POWER CONTROL/TIMING ADVANCE


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION PACKET POWER CONTROL/TIMING ADVANCE RADIO PACCH 44.060 This message is sent by the network to the mobile station on PACCH to provide the mobile station with its initial timing advance during the downlink TBF establishment procedure. From: BTS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST MAC header Control message contents To: MS TYPE MV MV COMMENT LENGTH (byte) 1 22 23 TIMER ABIS A

DIRECTION

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. FBS GPRS - Radio interface - RRM sublayer - PCC (ref. [29]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET POWER CONTROL/TIMING ADVANCE 3BK 11203 0138 DSZZA 623/639

8.21 PACKET PSI STATUS


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION RADIO PACCH 44.060 This message is sent from the mobile station to the network to indicate which PSI messages the mobile station has received. From: MS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST MAC header Control message contents To: BTS TYPE MV MV COMMENT LENGTH (byte) 1 22 23 TIMER PACKET PSI STATUS ABIS A

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. FBS GPRS - Radio interface - RRM sublayer - PCC (ref. [29]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET PSI STATUS 3BK 11203 0138 DSZZA 624/639

8.22 PACKET RESOURCE REQUEST


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO PACCH 44.060 This message is sent by the mobile station to the network on PACCH to request the establishment of an uplink TBF (2 phase access) or to request a change in the uplink allocated resources. From: MS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST MAC header Control message contents To: BTS TYPE MV MV COMMENT LENGTH (byte) 1 22 23 TIMER PACKET RESOURCE REQUEST ABIS A

DIRECTION

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. An uplink TBF is established in case of a 2 phase access. FBS GPRS - Radio interface - RRM sublayer - PCC (ref. [29]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET RESOURCE REQUEST 3BK 11203 0138 DSZZA 625/639

8.23 PACKET SERVING CELL DATA


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION RADIO PACCH 44.060 This message is sent by the network to provide system information broadcast on the BCCH (respectively PBCCH to a mobile station. From: BTS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST MAC header Control message contents To: MS TYPE MV MV COMMENT LENGTH (byte) 1 22 23 TIMER PACKET SERVING CELL DATA ABIS A

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. FBS GPRS - Radio interface - RRM sublayer - PCC (ref. [29]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET SERVING CELL DATA 3BK 11203 0138 DSZZA 626/639

8.24 PACKET SI STATUS


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION RADIO PACCH 44.060 This message is sent from the mobile station to the network to indicate which SI messages the mobile station has received. From: MS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST MAC header Control message contents To: BTS TYPE MV MV COMMENT LENGTH (byte) 1 22 23 TIMER PACKET SI STATUS ABIS A

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. FBS GPRS - Radio interface - RRM sublayer - PCC (ref. [29]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET SI STATUS 3BK 11203 0138 DSZZA 627/639

8.25 PACKET SYSTEM INFORMATION TYPE 1


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO PBCCH or PACCH 44.060 This message is sent by the network on PBCCH giving information for cell selection, for control of the PRACH, for description of the control channel, and for power control. In case of a cell configured with PBCCH, the message is also sent periodically on PACCH to provide MS in packet transfer mode with the state of the packet system informations. From: BTS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST MAC header Control message contents To: MS TYPE MV MV COMMENT LENGTH (byte) 1 22 23 TIMER PACKET SYSTEM INFORMATION TYPE 1 ABIS A

DIRECTION

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. FBS GPRS - Radio interface - RRM sublayer - PRH (ref. [34]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET SYSTEM INFORMATION TYPE 1 3BK 11203 0138 DSZZA 628/639

8.26 PACKET SYSTEM INFORMATION TYPE 2


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION RADIO PBCCH 44.060 This message is sent by the network on PBCCH giving information of reference frequency list, cell allocation, GPRS mobile allocation and PCCCH description. From: BTS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST MAC header Control message contents To: MS TYPE MV MV COMMENT LENGTH (byte) 1 22 23 TIMER PACKET SYSTEM INFORMATION TYPE 2 ABIS A

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. FBS GPRS - Radio interface - RRM sublayer - PRH (ref. [34]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET SYSTEM INFORMATION TYPE 2 3BK 11203 0138 DSZZA 629/639

8.27 PACKET SYSTEM INFORMATION TYPE 3


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO PBCCH 44.060 This message is sent by the network on PBCCH giving information of the BCCH allocation in the neighbour cells and cell selection parameters for serving cell and non-serving cells. From: BTS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST MAC header Control message contents To: MS TYPE MV MV COMMENT LENGTH (byte) 1 22 23 TIMER PACKET SYSTEM INFORMATION TYPE 3 ABIS A

DIRECTION

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. FBS GPRS - Radio interface - RRM sublayer - PRH (ref. [34]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET SYSTEM INFORMATION TYPE 3 3BK 11203 0138 DSZZA 630/639

8.28 PACKET SYSTEM INFORMATION TYPE 3bis


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO PBCCH 44.060 This message is sent by the network on PBCCH giving information of the BCCH allocation in the neighbour cells and cell selection parameters for non-serving cells. From: BTS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST MAC header Control message contents To: MS TYPE MV MV COMMENT LENGTH (byte) 1 22 23 TIMER PACKET SYSTEM INFORMATION TYPE 3bis ABIS A

DIRECTION

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. FBS GPRS - Radio interface - RRM sublayer - PRH (ref. [34]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET SYSTEM INFORMATION TYPE 3bis 3BK 11203 0138 DSZZA 631/639

8.29 PACKET SYSTEM INFORMATION TYPE 3quater


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION PACKET SYSTEM INFORMATION TYPE 3 quater RADIO PBCCH 44.060 This message is sent by the network on PBCCH giving information of the BCCH allocation in the 3G neighbour cells and cell selection parameters for non-serving UTRAN FDD cells. From: BTS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST MAC header Control message contents To: MS TYPE MV MV COMMENT LENGTH (byte) 1 22 23 TIMER ABIS A

DIRECTION

IMPLEMENTATION MAXIMUM LENGTH (byte) NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. FBS GPRS - Radio interface - RRM sublayer - PRH (ref. [34]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET SYSTEM INFORMATION TYPE 3quater 3BK 11203 0138 DSZZA 632/639

8.30 PACKET SYSTEM INFORMATION TYPE 8


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION RADIO PBCCH and PACCH 44.060 This message is optionally sent by the network giving information about Cell Broadcast Channel configuration. From: BTS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST MAC header Control message contents To: MS TYPE MV MV COMMENT LENGTH (byte) 1 22 23 TIMER PACKET SYSTEM INFORMATION TYPE 8 ABIS A

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. FBS GPRS - Radio interface - RRM sublayer - PRH (ref. [34]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET SYSTEM INFORMATION TYPE 8 3BK 11203 0138 DSZZA 633/639

8.31 PACKET SYSTEM INFORMATION TYPE 13


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION RADIO PACCH 44.060 In a cell without PBCCH, this message is sent by the network on PACCH to provide mobile stations listening to the PDCH with GPRS cell specific accessrelated informations and with the status of the system informations. From: BTS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST MAC header Control message contents To: MS TYPE MV MV COMMENT LENGTH (byte) 1 22 23 TIMER PACKET SYSTEM INFORMATION TYPE 13 ABIS A

DIRECTION

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. FBS GPRS - Radio interface - RRM sublayer - PRH (ref. [34]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET SYSTEM INFORMATION TYPE 13 3BK 11203 0138 DSZZA 634/639

8.32 PACKET TBF RELEASE


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION RADIO PACCH 44.060 This message is sent by the network to the mobile station to initiate release of an uplink or downlink TBF. From: BTS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST MAC header Control message contents To: MS TYPE MV MV COMMENT LENGTH (byte) 1 22 23 TIMER PACKET TBF RELEASE ABIS A

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. FBS GPRS - Radio interface - RRM sublayer - PCC (ref. [29]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET TBF RELEASE 3BK 11203 0138 DSZZA 635/639

8.33 PACKET TIMESLOT RECONFIGURE


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION RADIO PACCH 44.060 This message is sent on the PACCH by the network to the mobile station to assign uplink and downlink resources. From: BTS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST MAC header Control message contents To: MS TYPE MV MV COMMENT LENGTH (byte) 1 22 23 TIMER PACKET TIMESLOT RECONFIGURE ABIS A

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. FBS GPRS - Radio interface - RLC sublayer (ref. [30]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET TIMESLOT RECONFIGURE 3BK 11203 0138 DSZZA 636/639

8.34 PACKET UPLINK ACK/NACK


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION RADIO PACCH 44.060 This message is sent by the network to the mobile station on PACCH to indicate the status of the received RLC data blocks. From: BTS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST MAC header Control message contents To: MS TYPE MV MV COMMENT LENGTH (byte) 1 22 23 TIMER PACKET UPLINK ACK/NACK ABIS A

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. FBS GPRS - Radio interface - RLC sublayer (ref. [30]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET UPLINK ACK/NACK 3BK 11203 0138 DSZZA 637/639

8.35 PACKET UPLINK ASSIGNMENT


NAME INTERFACE CHANNEL/ USAGE 3GPP-REF FUNCTION DIRECTION RADIO PCCCH or PACCH 44.060 This message is sent by the network to the mobile station on PCCCH or PACCH to assign uplink resources. From: BTS INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST MAC header Control message contents To: MS TYPE MV MV COMMENT LENGTH (byte) 1 22 23 TIMER PACKET UPLINK ASSIGNMENT ABIS A

IMPLEMENTATION MAXIMUM LENGTH NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. FBS GPRS - Radio interface - RRM sublayer - PCC (ref. [29]) ABNORMAL SITUATION

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE PACKET UPLINK ASSIGNMENT 3BK 11203 0138 DSZZA 638/639

3GPP AGCH AMR ARFCN BA BCCH BSC BSS BTS CCCH CHAN CND DPC FN FU HR IE IEI LA LCS LMU LSA MS MSC NA OIE OPC PCH PSI RA RACH RX SACCH SCCP SCH SDCCH SI SMSCB SoLSA SPI SSF SPA SSP/SSA TCH TS VGCS

GLOSSARY

3rd Generation Partnership Project Access Grant CHannel Adaptive MultiRate codec Absolute Radio Frequency Channel Number BCCH Allocation Broadcast Control CHannel Base Station Controller Base Station Subsystem (BSC+n*BTS) Base Transceiver Station Common Control CHannel Channel Configuration Data Destination Point Code Frame Number Frame Unit Half Rate Information Element Information Element Identifier Location Area LoCation Services Location Measurement Unit Localised Service Area Mobile Station Mobile Switching Centre Not Applicable Optional Information Element Originating Point Code Paging Channel Packet System Information message Random Access or Routing Area Random Access CHannel Receiver Slow Associated Control CHannel Signalling Connection Control Part Synchronization CHannel Stand alone Dedicated Control CHannel System Information message Short Message Service Cell Broadcast Support of Localised Service Area Signalling Point Inaccessible Sub Service Field Signalling Point Accessible SubSystem Prohibited/Allowed Traffic CHannel Technical Specification Voice Group Call Service

END OF DOCUMENT

ED EVOLIUM

05

RELEASED

0138_05.doc 15/02/2008

LAYER 3 MESSAGE DICTIONARY - AIR INTERFACE 3BK 11203 0138 DSZZA 639/639

Anda mungkin juga menyukai