BRESON Highlights
Innovative design - suitable for urban and suburban areas having turbulent and gusty winds.
Vertical Axis Changing ever changing wind direction will not impact the energy output.
Flexible mounting can be mounted on rooftop, pole or along the building structure.
Sustainable design generation at low wind speed will result in a cost break even within 2 years of installation*
Customized systems - designed to provide maximum output under the available geographic location and wind-speed.
* 2 year time frame is achieved at an annual average wind speed of 6 m/s (13.4 mph)
The kinetic (motion) energy from the wind is captured by Breson Wind Turbine to convert in to usable electricity through an inverter for residential, business or institutional purpose. OUTPUT Performance of the BRESON Wind Turbine is based on obstructions near the installation, wind
speed at your specific location. Wind class is ranked on a scale of 1 to 7. Average wind speed at or
above Class 2 would meet your average 50% of annual electricity needs. STEPS TO INSTALL BRESON WIND TURBINE: STEP 1: Assess the wind potential
WIND CLASS:
Class 1 - Minimal 0-2 Class 2 - Average 3-5 Class 3 - Better than Average 6-8 Class 4 to 7 - Favorable 8-12 (0-8 mph)
www.breson.info
STEP 2: Detailed Wind Energy Study for your site by BRESON & preparing a feasibility report STEP 3: Order a BRESON Turbine - visit our Website or contact us STEP 4: Installation of BRESON Turbine
Design: Changing wind direction will not have any impact on generation - turbine rotate in one direction.
Installation: Turbines are easy to install, requires very less space. They can be installed on the roof-top or in your back-yard.
Blades: Blade design allows turbine to spin at lower RPM, generating more energy at lower speeds.
Foundation: Special designed base of the turbine minimizes the vibrations level and noise factor.
Advantage of BRESON Wind Turbine: High output at low wind speed saving electricity Environmental benefits from on-site clean energy Eligible for GRIHA / LEED certification points Subsidy & tax saving on account of accelerated depreciation* Branding value by demonstrating sustainability
Advantage:
TECHNICAL SPECIFICATIONS
BRESONs Vindz-500W watts
Type: Vertical Axis, Structure / Pole Mount Power Rating: 500 watts Power Output: 500 watts @ 8 m/s Cut-in wind speed: 2.5 m/s Rotor Height & Diameter: 6.5 ft Blade Material: Carbon Fiber Weight: 192 kg Rated RPM: 100 RPM Generator Type: Phase Permanent Magnet Ambient Temperature: 25 C to 65 C Type: Vertical Axis, Structure / Pole Mount Power Rating: 1000 watts Power Output: 1000 watts @ 9 m/s Cut-in wind speed: 2.8 m/s Rotor Height & Diameter: 7.5 ft Blade Material: Carbon Fiber Weight: 230 kg Rated RPM: 100 RPM Generator Type: Phase Permanent Magnet Ambient Temperature: 25 C to 65 C Type: Vertical Axis, Structure / Pole Mount Power Rating: 5000 watts Power Output: 5000 watts @ 9 m/s Cut-in wind speed: 3 m/s Rotor Height & Diameter: 10 ft Blade Material: 3-Carbon Fiber Weight: 260 kg Rated RPM: 60 RPM Generator Type: Phase Permanent Magnet Ambient Temperature: 25 C to 65 C
BRESONs Vindz-1kW
BRESONs Vindz-5kw
All the models are available in both Grid-tie System as well as Battery Back-up System.
These are the important scenarios that need to be considered before designing and installation of the turbine requirement differ from client to client .
BRESON Wind Turbine is customized keeping in mind the above parameters, thus developing a customized environmentally sustainable product to generate maximum energy during the lifetime of the turbine than a standard product. Our approach differentiate us from our competitor
Other products: