SERVICE MANUAL
Ver. 1.1 2006.05
US and foreign patents licensed from Dolby Laboratories. SonicStage is a trademark or registered trademark of Sony Corporation. MD Simple Burner, OpenMG, MagicGate, MagicGate Memory Stick, Memory Stick, Hi-MD, Net MD, ATRAC, ATRAC3, ATRAC3plus and their logos are trademarks of Sony Corporation. Microsoft, Windows, Windows NT and Windows Media are trademarks or registered trademarks of Microsoft Corporation in the United States and /or other countries. IBM and PC/AT are registered trademarks of International Business Machines Corporation. Macintosh is a trademark of Apple Computer, Inc. Pentium is a trademark or registered trademark of Intel Corporation. MPEG Layer-3 audio coding technologyand patents licensed from Fraunhofer IIS and Thomson. All other trademarks and registered trademarks are trademarks or registered trademarks of their respective holders. and marks are omitted in this manual. CD and music-related data from Gracenote, Inc., copyright 2000-2004 Gracenote. Gracenote CDDB Client Software, copyright 2000-2004 Gracenote. This product and service may practice one or more of the following U.S. Patents: #5,987,525; #6,061,680; #6,154,773, #6,161,132, #6,230,192, #6,230,207, #6,240,459, #6,330,593, and other patents issued or pending. Services supplied and/or device manufactured under license for following Open Globe, Inc. United States Patent 6,304,523. Gracenote is a registered trademarks of Gracenote. The Gracenote logo and logotype, and the Powered by Gracenote logo are trademarks of Gracenote. Program 2001, 2002, 2003, 2004, 2005 Sony Corporation Documentation 2006 Sony Corporation
Model Name Using Similar Mechanism MD Mechanism Type Optical Pick-up Name
SPECIFICATIONS
Audio playing system
MiniDisc digital audio system
Systems
MiniDisc system, Hi-MD system
PORTABLE MD RECORDER
9-887-182-02
2006E05-1 2006.05
Sony Corporation
Personal Audio Division Published by Sony Techno Create Corporation
MZ-RH1
Recording and playback time List of the recording time for each disc (Approx.)
The recording time is varied depending on disc type, disc mode, codec, and bit rate.
When using a disc in Hi-MD mode When recording on the recorder Codec/ Bit rate LinearPCM/ 1.4 Mbps ATRAC
ATRAC3plus/ 256 kbps ATRAC3plus/ 64 kbps
Power requirements
Recording time1) 80-minute standard disc 28 minutes 74-minute standard disc 26 minutes 60-minute standard disc 21 minutes
Recording mode 1GB Hi-MD on the recorder disc PCM 1 hour and 34 minutes
Hi-SP Hi-LP 7 hours and 55 minutes 34 hours
Sony AC Power Adaptor DC 5 V AC 100 V - 240 V, 50/60 Hz Lithium-ion rechargeable battery LIP-4WM, 3.7 V, 370 mAh, Li-ion
Operating temperature
+5 C (+41 F) to +35 C (+95 F)
When Recording
LinearPCM 6
5 10 8
Hi-SP 9
9 15.5 14.5
MP32) 3)
3) 16.5 16
1 hour and 35 minutes 2 hours and 20 minutes 3 hours and 10 minutes 10 hours and 10 minutes 13 hours and 30 minutes 4 hours and 50 minutes 6 hours and 10 minutes 9 hours and 50 minutes 5 hours
1 hour and 30 minutes 2 hours and 10 minutes 3 hours 9 hours and 20 minutes 12 hours and 30 minutes 4 hours and 30 minutes 5 hours and 40 minutes 9 hours 4 hours and 30 minutes
1 hour and 10 minutes 1 hour and 40 minutes 2 hours and 20 minutes 7 hours and 40 minutes 10 hours 3 hours and 40 minutes 4 hours and 40 minutes 7 hours and 20 minutes 3 hours and 30 minutes
Playing
SP 8.5
15.5
LP4 12
19
Measured in accordance with the JEITA (Japan Electronics and Information Technology Industries Association) standard.
1) 2) 3)
Measured using a fully charged lithium-ion rechargeable battery with EL Light in the menu set to Auto Off When transferring at 128 kbps The recorder cannot record in MP3 mode. Transfer MP3 audio data using the supplied SonicStage software
Note Repeated recharging causes the capacity of the rechargeable battery to decrease over time. As a result, the battery life will become shorter as the battery is used. Please replace the battery when the battery life reaches about half the time listed above.
1) When transferring 4-minute tracks 2) MP3 le formats are as follows: MPEG-1 Audio Layer-3/sampling frequency 44.1 kHz/xed bit rate.
Dimensions
Approx. 83.8 84.4 14.7 mm (w/h/d) (33/8 3 3/8 19/32 in.) (excluding projecting parts and controls)
Revolutions
Approx. 350 rpm to 3,600 rpm (CLV)
Mass
Approx. 96 g (3.4 oz.) (the recorder only) Approx. 106 g (3.8 oz.) (including the rechargeable battery) * The LINE IN (OPT) jack is used to connect either a digital (optical) cable or a line (analog) cable. ** Measured in accordance with JEITA.
Error correction
Hi-MD: LDC (Long Distance Code)/BIS (Burst Indicator Subcode) MD: ACIRC (Advanced Cross Interleave Reed Solomon Code)
Sampling frequency
44.1 kHz
Supplied accessories
AC power adaptor (100 V - 240 V) AC power cord1) USB cable Remote control2) Earphones LIP-4WM Lithium-ion rechargeable battery Rechargeable battery case Optical cable (for the European model) Carrying pouch Ferrite core (small size) Three for the European model Two for the North American model 1GB Hi-MD disc (except for the European model) CD-ROM3) (Windows: SonicStage/MD Simple Burner, Macintosh: Hi-MD Music Transfer for Mac) Operating Instructions (this manual) Operating Instructions (Hi-MD Music Transfer for Mac)
1)
Modulation system
Hi-MD: 1-7RLL (Run Length Limited)/PRML (Partial Response Maximum Likelihood) MD: EFM (Eight to Fourteen Modulation)
Input connectors*
MIC (PLUG IN POWER): stereo mini-jack (minimum input level 0.13 mV) LINE IN (OPT): stereo mini-jack for analog input (minimum input level 49 mV)/optical (digital) mini-jack for optical (digital) input
2) 3)
The shape of the plug differs according to the region where the recorder was purchased. Two cords with differently shaped plugs are supplied with the models for Europe, Asia and Chile. Use the one that corresponds with the outlet conguration in the region where it is used. For the North American and Latin American models, remote with a ferrite core is supplied. Do not play a CD-ROM on an audio CD player. For details on Hi-MD Music Transfer for Mac, refer to the instruction sheet supplied with this recorder.
Output connector
i/LINE OUT: stereo mini-jack (dedicated remote jack) / regulated output 194 mV (10 k)
MZ-RH1
Notes on chip component replacement Never reuse a disconnected chip component. Notice that the minus side of a tantalum capacitor may be damaged by heat. Flexible Circuit Board Repairing Keep the temperature of the soldering iron around 270 C during repairing. Do not touch the soldering iron on the same conductor of the circuit board (within 3 times). Be careful not to apply force on the conductor when soldering or unsoldering. CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
TABLE OF CONTENTS 1. 2. 3.
3-1. 3-2. 3-3. 3-4. 3-5. 3-6. 3-7. 3-8. 3-9. 3-10.
3-11. 3-12.
10 11 11
4. 5. 6.
6-1. 6-2. 6-3. 6-4. 6-5. 6-6. 6-7. 6-8. 6-9. 6-10. 6-11.
Block Diagram SERVO Section ................................ Block Diagram AUDIO Section ................................ Block Diagram POWER SUPPLY Section ............... Schematic Diagram MAIN Section (1/7) .................. Schematic Diagram MAIN Section (2/7) .................. Schematic Diagram MAIN Section (3/7) .................. Schematic Diagram MAIN Section (4/7) .................. Schematic Diagram MAIN Section (5/7) .................. Schematic Diagram MAIN Section (6/7) .................. Schematic Diagram MAIN Section (7/7) .................. Printed Wiring Board MAIN Board (Component Side) ............................... 6-12. Printed Wiring Board MAIN Board (Conductor Side) ................................. 6-13. Printed Wiring Board OLED Board .......................... 6-14. Schematic Diagram OLED Board .............................
7.
7-1. 7-2. 7-3. 7-4. 7-5. 7-6.
EXPLODED VIEWS
Panel (Upper) Section ..................................................... Cabinet (Front) Section ................................................... Lower Panel Section ........................................................ Set Chassis Section .......................................................... MAIN Board Section ....................................................... Mechanism Deck Section (MT-MZRH1-181) ................ 52 53 54 55 56 57
SAFETY-RELATED COMPONENT WARNING!! COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY. ATTENTION AU COMPOSANT AYANT RAPPORT LA SCURIT! LES COMPOSANTS IDENTIFIS PAR UNE MARQUE 0 SUR LES DIAGRAMMES SCHMATIQUES ET LA LISTE DES PICES SONT CRITIQUES POUR LA SCURIT DE FONCTIONNEMENT. NE REMPLACER CES COM- POSANTS QUE PAR DES PICES SONY DONT LES NUMROS SONT DONNS DANS CE MANUEL OU DANS LES SUPPLMENTS PUBLIS PAR SONY.
8.
SL463
System requirements
The following system environment is required in order to use the SonicStage/MD Simple Burner software. Computer IBM PC/AT or Compatible CPU: Pentium III 450 MHz or higher Hard disk drive space: 200 MB or more (1.5 GB or more is recommended) (The amount space will vary according to Windows version and the number of music les stored on the hard disk.) RAM: 128 MB or more Others CD drive (capable of digital playback by WDM) (A CD-R/RW drive is necessary for CD writing) Sound Board USB port
Operating System
Factory installed: Windows XP Media Center Edition 2005/Windows XP Media Center Edition 2004/Windows XP Media Center Edition/Windows XP Professional/Windows XP Home Edition/Windows 2000 Professional (Service Pack 3 or later)/ Windows Millennium Edition/Windows 98 Second Edition High Color (16 bit) or higher, 800 better is recommended) Internet access for online registration and CDDB use Internet access and Microsoft Internet Explorer (version 5.5 or higher) for use of EMD services Windows Media Player (version 7.0 or higher) installed for playing WMA les
Display Others
NOTES ON REPLACEMENT OF CSP (CHIP SIZE PACKAGE) IC Replacement of IC401, IC501, IC601 and IC701 on the MAIN board used in this set requires a special tool. NOTES ON REPLACEMENT OF IC801 ON THE MAIN BOARD IC801 on the MAIN board can not be exchanged alone. When IC801 on the MAIN board is damaged, exchange the complete MAIN board. NOTES ON REPLACEMENT OF IC1 AND S8 ON THE OLED BOARD IC1 and S8 on the OLED board can not be exchanged alone. When IC1 and S8 on the OLED board are damaged, exchange the complete OLED board.
This software is not supported by operating systems other than those listed above, custom-built PCs, operating systems that are upgrades from the original manufacturer-installed system, multiboot environments, multi-monitor environments, or Macintosh computers.
Notes
We do not ensure trouble-free operation on all computers that satisfy the system requirements. The NTFS format of Windows XP/Windows 2000 Professional can be used only with the standard (factory) settings. We do not ensure trouble-free operation of the system suspend, sleep, or hibernation function on all computers.
OPEN button LINE IN (OPT) jack MIC (PLUG IN POWER)* jack (earphones)/LINE OUT jack Recorder: VOL +*/ buttons Remote: VOL +/ control Recorder: DISPLAY/ MENU button Remote: DISPLAY button Operation lamp Display window HOLD switch Recorder: (stop) CANCEL button Remote: (stop) button (pause) button REC switch T MARK button Recorder: Jog lever ( (play)/ENT*, FF (AMS, fast forward), FR (AMS, fast rewind))
FF
Remote: Jog lever ( (play, pause)/ (AMS, fast rewind), ENT, (AMS, fast forward)) USB cable connecting jack Battery compartment (group) +/ button Clip P MODE/ (repeat) button SOUND button
* There is a tactile dot.
Locking the controls (HOLD) Slide the HOLD switch on the recorder or on the remote in the direction of the arrow. You can prevent accidental button presses while carrying the recorder by locking the controls. You can use the HOLD function for the recorder and the remote separately. For example, even if the HOLD function on the recorder is activated, you can operate the recorder by using the remote unless you set HOLD on the remote to on, too.
3-2. PANEL (LOWER) SECTION (Page 6) 3-3. CABINET (FRONT) SECTION (Page 7) 3-4. MAIN BOARD (Page 7) 3-5. PANEL (UPPER) ASSY (Page 8)
3-6. MECHANISM DECK (MT-MZRH1-181) (Page 8) 3-8. GEAR (SA), GEAR (SB) (Page 9) 3-9. OP SERVICE ASSY (ABX-U2) (Page 10)
3-10. DC MOTOR SSM18D/C-NP (SPINDLE) (M701), DC MOTOR (SLED) (M702), DC MOTOR UNIT (OVER WRITE HEAD UP/DOWN) (M703) (Page 10)
3-11. HOLDER ASSY (Page 11) 3-12. POSITION OF FERRITE CORE (Page 11)
knob (hold) Note: On installation of panel (lower) section, adjust the position of switch (S464) and knob (hold). knob (hold)
S464
5 two screws (M1.4)
4 screw (M1.4)
2 two bosses 3 battery case lid 1 Open the battery case lid.
S464
MZ-RH1
Ver. 1.1
1 Push the knob (open) in the direction of arrow A and open the panel (upper) section.
3 screw (M1.4) 4 Remove from the convex part of the screw hole.
2 shield assy
6 two screws (M1.4) 3 Remove two solders of the flexible board (over write head (HR601)).
Note: When mounting the MAIN Board, clean the screw fixing areas (5 places both sides) of the MAIN Board with alcohol (ethanol), and then tighten the screws. Also, when tightening the screws, use a torque driver and tighten them to a torque range of 0.06 0.08N. (Excessive torque over 0.1N could bend the chassis.) (Without cleaning, or with the screws tightened loosely, the set may not start when the USB cable is inserted.)
MZ-RH1
1 case (batt)
MZ-RH1
hook
3 Engage the end torsion spring (POP UP L) with the hook.
hook
hook hook 2 Engage the end torsion spring (POP UP R) with the hook.
1 Engage the coil torsion spring (POP UP R) with the hook.
hook hook
1 Engage the coil torsion spring (POP UP L) with the hook.
3 washer (0.8-2.5)
5 gear (SB)
4 gear (SA)
MZ-RH1
1 Lead screw block assy is turned and it removes from OP service assy.
3-10. DC MOTOR SSM18D/C-NP (SPINDLE) (M701), DC MOTOR (SLED) (M702) , DC MOTOR UNIT (OVER WRITE HEAD UP/DOWN) (M703)
3 two screws (M1.4) 4 DC motor (sled) (M702) 1 Remove four solders of flexible board.
8 self tap screw 6 three self tap screws 9 DC motor unit (over write head up/down) (M703) 7 DC motor SSM18D/C-NP (spindle) (M701)
10
MZ-RH1
3 holder assy
2 boss
2 boss
REMOTE CONTROL UNIT (SUPPLIED) A cable is rolled once. remote control unit
4cm
1cm
STEREO MICROPHONE (OPTION) A cable is rolled twice without twisting it. stereo microphone
4cm
1cm
11
Ver 1.000
BEr******
Manual Mode
0000
[VOL --] key
x key
Manual
0000
[DISPLAY/MENU] key
AdjF**
All lit
0100
Open the upper panel
10
All off
Ver 1.000
BEr******
Microcomputer version display
0000
1 0000
0000
P00r00
0000
[DISPLAY/MENU] key (press a few Key Count Mode seconds)
p00R00
0000
Remote commander [DISPLAY] key (press a few seconds) (Not used in servicing. Return to the display check mode when entering by mistake)
12
MZ-RH1
3. MANUAL MODE This is mode to adjust or check the operation of the set by function. Operation of The Manual Mode 1. Enter the test mode (Display Check mode). 2. Press the [VOL+] key to activate the Manual mode where the EL displays as shown below.
5. The display changes a shown below each time the [DISPLAY/MENU] key is pressed.
XXXX
item number
******##
adjusted value item title
0000
Manual
3. During Manual mode, the optical pick-up moves outward or inward while the > or . key is pressed for several seconds respectively. 4. Each test item is assigned with a four-digit item number; 1000th place is a top item, 100th place is a major item, 10th place is a medium item, and unit place is a minor item. Flow of manual mode operation:
Top item switching
> key x key [VOL +] key: 1000th place of item number increase. [VOL --] key: 1000th place of item number decrease. [VOL +] key: 100th place of item number increase. [VOL --] key: 100th place of item number decrease. [VOL +] key: 10th place of item number increase. [VOL --] key: 10th place of item number decrease. > key: . key:
XXXX
item number
***S##
adjusted value address
XXXX
item number
***J##
adjusted value jitter value
XXXX
item number
***B##
adjusted value block/bite error value
XXXX
Medium item switching
> key x key
***B##
adjusted value bite error LPF value
item number
1st place of item number increase. 1st place of item number decrease.
XXXX
item number
***B##
adjusted value CEMAX value
XXXX
item number
***B##
adjusted value ADIP error value
XXXX
item number
***B##
adjusted value focus drive voltage value
*1) It is skipped excluding the item number 5000 less than 8000.
13
MZ-RH1
4. OVERALL ADJUSTMENT MODE Operation of The Overall Adjustment Mode 1. Enter the test mode (Display Check mode). 2. Press the [VOL--] key to activate the Overall Adjustment mode where the EL displays as shown below.
0000
AdjF**
3. To release the Overall Adjustment mode, press the return to the Display Check mode.
key and
5. SELF-DIAGNOSIS RESULT DISPLAY MODE This set uses the self-diagnostic function system in which if an error occurred during the recording or playing, the mechanism control block and the power supply control block in the microcomputer detect it and record its cause as history in the nonvolatile memory. By checking this history in the test mode, you can analyze a fault and determine its location. Total recording time is recorded as a guideline of how long the optical pick-up has been used, and by comparing it with the total recording time at the time when an error occurred in the selfdiagnosis result display mode, you can determine when the error occurred. Clear the total recording time, if the optical pick-up was replaced. 5-1. Operation of The Self-Diagnosis Result Display Mode 1. Enter the test mode (Display Check mode). 2. Press the > key to activate the Self-Diagnosis Result Display mode where the LCD displays as shown below.
****
$$####
**** : Error display code $$ : Error revision history code #### : Addition information when error occurs
3. To release the Self-Diagnosis Result Display mode, press the x key and return to the Display Check mode. Flow of Self-diagnosis Result Display mode operation:
****
[VOL +] key
1 ####
[VOL --] key
****
[VOL +] key
N ####
[VOL --] key
****
[VOL +] key
N1####
[VOL --] key
****
[VOL +] key
N2####
[VOL --] key
****
[VOL +] key
R_####
[VOL --] key
14
MZ-RH1
6. KEY CHECK MODE This mode is used for key check. Operation of The Key Check Mode 1. Enter the test mode (Display Check mode). 2. Press the [DISPLAY/MENU] key to activate the Key Check mode where the LCD displays as shown below.
0100
$$$$$$ # #
$$$$$$ : Pressed key name. When remote commander key is pressed, display becomes as r$$$$$. ## : Key voltage of remote commander. (Hexadecimal number)
3. To release the Key Check mode, open the upper panel and return to the Display check mode.
Error display code Addition information when error occurs 0000 0000 0001 Illegal cluster specified when error occurs 0002 to 0034 Total recording time when error occurs
5-3. Clear The Total Recording Time After replacing the optical pick-up, clear the total recording time. 1. Enter the test mode (Display Check mode). 2. Press the > key to activate the Self-Diagnosis Result Display mode. 3. Press the [VOL--] key once to display the total recording time indication. 4. Press the X key and display ClrOK?. 5. Press the X key again to display RecT 0 and clear the total recording time.
15
3. ADJUSTMENT OF THE EACH ITEM 3-1. Initialize The Adjustment Value Procedure: 1. In the test mode (Display Check mode), press the [VOL--] key to enter the Overall adjustment mode. 2. Press the [T MARK] key and display 1911 ResOK?. 3. Press the X key to display 1911 Reset! and initialize the adjustment values. 4. Press the x key and back to Display Check mode. 3-2. Power Supply Voltage Adjustment Adjustment must be done with the following order. 3-2-1. Setting Procedure: 1. Apply the voltage of 3.7 V to W401 (BATT+) and W402 (BATT), and enter the test mode (Display Check mode). 2. Press the [VOL+] key to enter the Manual mode. 3. Press the [VOL+] key twice to display as follows.
2. ADJUSTMENT SEQUENCE Adjustment must be done with the following order. Adjustment order: 1. Entering the test mode
Note: Enter the test mode with a key.
2000
POWER
2. 3. 4. 5. 6. 7. 8. 9.
Initialize the adjustment value Power supply voltage adjustment Charge function check Laser power check Setting the adjustment values Servo Overall adjustment Resume clear Releasing the test mode
4. Press the > key once, press the [VOL+] key once, and press the > key once again to display as follows.
2210
PwrAdj
5. Repeat the next procedures (3-2-2. PwrAdj Adjustments), and adjust all contents of table 3-2-1. PwrAdj Specifications. 3-2-2. PwrAdj adjustments Repeat the following procedures and adjust all contents of table 32-1. PwrAdj Specifications.
Example Display (Item No. 2211)
2211
VC1
**
Procedure: 1. Connect the digital voltmeter to measuring point (refer to the following table 3-2-1) and CL965 (GND). 2. Press the > key to change the item number to 2211. 3. Adjust with [VOL+]/[VOL--] keys so that the value of digital voltmeter becomes specification value. 4. Press the X key to write the adjusted value. (Shifts to the next item automatically) 5. Repeat adjustment from step 3 until item number 2234.
16
MZ-RH1
Item No. Display 2211 VC1 ** 2212 VC1H N ** 2213 VC2L ** 2214 VC2H ** 2217 REG1 L ** 2218 REG1 H ** 2219 REG2 1 ** 2221 REG2 2 ** 2222 REG2 3 ** 2223 REG2 4 ** 2224 REG3 ** 2225 VREC 1 ** 2226 VREC 2 ** 2227 VREC 3 ** 2228 VREC 4 ** 2229 VREC 5 ** 2231 VREC 6 ** 2232 VREC 7 ** 2233 VREC 8 ** 2234 VREC 9 **
Specification value 2.05V + 0.02V 2.25V 0.01V 1.50V + 0.01V 1.50V + 0.01V 3.02V 0.02V 3.02V 0.02V 2.275V 0.01V 2.480V 0.01V 2.740V 0.01V 2.985V 0.01V 2.52V 0.02V 0.75V 0.02V 0.80V 0.02V 1.52V 0.02V 2.17V 0.02V 2.78V 0.02V 0.75V 0.02V 0.90V 0.02V 2.10V 0.02V 2.70V 0.02V
Measuring point TP8065 TP8065 CL8001 CL8001 CL954 CL954 CL951 CL951 CL951 CL951 CL947 CL601 CL601 CL601 CL512 CL512 CL601 CL601 CL601 CL601
3-2-3. VBsAdj adjustments Procedure: 1. In the 3-2-2. PwrAdj Adjustments completed status, display as follows.
2240
VBsAdj
Note1: ** is adjustment value (hexadecimal number). Note2: Ground point of all measuring points is CL965. Note3: Item number 2228, 2229 are adjusted with the mechanism deck connected.
2. Apply the voltage of 5 V to CL441 (VBUS 5V) and CL445 (VBUS GND). 3. Press the > key to change the item number to 2241. 4. Adjust with [VOL+]/[VOL--] keys so that the value of digital voltmeter becomes specification value. (Refer to table 3-22. VBsAdj Specifications) 5. Press the X key to write the adjusted value. 6. Repeat adjustments to item number 2242 at the same manner as step 4 to step 5. 7. Select the item number 2244, and turn off the power supply of applying to W401 (BATT+) and W402 (BATT). 8. Repeat adjustments to item number 2244, 2245 and 2246 at the same manner as step 4 to step 5. 9. Apply the voltage of 3.7 V to W401 (BATT+) and W402 (BATT) again. 10. Turn off the voltage of 5 V to CL441 (VBUS 5V) and CL445 (VBUS GND). 11. Press the x key three times and back to the Display Check mode.
CL601
CL445 CL441
SL802
17
MZ-RH1
Item No. Display Specification value Measuring point 2241 REG4 ** 1.13 V 0.01 V CL8001 2242 REG5 ** 2.05 V + 0.02 V TP8065 2244 DDC5 N ** 4.20 V 0.02 V CL964 2245 DDC5 C ** 4.45 V 0.02 V CL964 2246 DDC5 L ** 4.20 V 0.02 V CL964 Note1: ** is adjustment value (hexadecimal number). Note2: Ground point of all adjustment points is CL965. Note3: Refer to page 17 for adjustment location.
3-4. Laser Power Check Procedure: 1. Enter the test mode (Display Check mode). 2. Press the [VOL+] key to enter the Manual mode. 3. Open the upper panel and press the . key continuously until the optical pick-up moves to the most inward track. 4. Press the [VOL--] key once to display as follows.
9000
DESIGN
5. Press the > key three times to select the item number 9111 and display as follows.
9111
LrefPw **
Procedure: 1. Connect the resistor (10, more than 3W) to battery terminals. 2. Connect the USB cable, AC adapter and AC cord, and turn the power on. 3. Enter the test mode (Display Check mode). 4. Press the [VOL+] key to enter the Manual mode. 5. Press the [VOL+] key twice, press the > key once, press the [VOL+] key once. 6. Press the > key once, press the [VOL+] key twice to display as follows.
2250
7. Press the
>
ChrgLi
key to select the item number 2251.
6. Set the laser power meter so that the laser beam from the optical pick-up aims at the objective lens of laser power meter at right angle. (Confirm it with the disc not inserted) 7. Confirm that the value of laser power meter is 0.860 mW 19.2%. 8. Press the > key to select the item number 9112. 9. Confirm that the value of laser power meter is 0.763 mW 18.2%. 10. Press the > key to select the item number 9113. 11. Confirm that the value of laser power meter is 6.87 mW 12%. 12. Press the x key four times and back to the Display Check mode.
2251
ChrChk **
adjustment value (hexadecimal)
X x
key to check the ADJ OK that is displayed. key four times and back to the Display Check
18
MZ-RH1
3-5. Setting The Adjustment Values 3-5-1. Hi-MD3 setting Preparation: 1. Perform calculation every item based on the data given by the Hi-MD3 adjustment disc by referring to the following table. (Round off the value in decimal place) 2. Convert the calculated value into hexadecimal number.
Note: The Hi-MD3 adjustment parameters vary depending on the disc, and therefore use the parameters of the disc used when performing the adjustment. Item No. 0211 (*1) 0212 0213 (*2) 0214 0215 0216 Calculating formula (*3) Pr_nominal / 0.05 Por / 0.05 Kr (100) Pw_nominal / 0.05 Ppw / 0.05 Kw (100) Prmin / 0.05 Pwmin / 0.05
3-5-2. Destination setting Procedure: 1. Enter the test mode (Display Check mode). 2. Press the [VOL+] key to enter the Manual mode. 3. Press the > key five time to select the item number 0113 and display as follows.
0113
******
adjustment value (hexadecimal)
4. Adjust with [VOL+]/[VOL--] keys so that the adjustment value of EL becomes 01 (US, Canadian models) or 81 (AEP model). 5. Press the X key to write the adjusted value. 6. Press the x key four times and back to the Display Check mode.
*1) If the Pr_nominal value is indicated, use the Pr_nominal value and not used Por value. *2) If the Pw_nominal value is indicated, use the Pw_nominal value and not used Ppw value. *3) Round off after the decimal point.
Procedure: 1. Enter the test mode (Display Check mode). 2. Press the [VOL+] key to enter the Manual mode. 3. Press the > key once, press the [VOL+] key once, and press the > key once again to display as follows.
0210
DiscPr
4. Press the > key once to select the item number 0211. 5. Adjust with [VOL+]/[VOL--] keys so that the adjustment value of EL becomes calculated value. 6. Press the X key to write the adjusted value. 7. Press the > key to next item. 8. Repeat adjustment from step 4 until item number 0216.
19
MZ-RH1
3-6. Servo Overall Adjustment 3-6-1. Operation of the overall adjustment mode
Note1: Be sure to adjustment so that the set is horizontal and the upper panel is upside. Unless performed in that state, it is not adjusted correctly. Note2: If NG is displayed in the middle of this adjustments, perform 3-1. Initialize The Adjustment Value and 3-5. Setting The Adjustment Values again, then retry this adjustments from step 1.
3-6-2. Error message in the overall adjustment mode In the Overall Adjustment mode, if an error occurred, it displays as following table.
Display Close! DfDis! NoChg! NotCD! NotM1! NotH3! ****NG Description Dose not close the lid Unsuitableness disc was inserted Does not finish the check of charge function yet Does not complete the CD Overall adjustment before the MD1 Overall adjustment Does not complete the MD1 Overall adjustment before the Hi-MD3 Overall adjustment Does not complete the Hi-MD3 Overall adjustment before the Stray Light Offset Overall adjustment Error of item number ****
Procedure: 1. Enter the test mode (Display Check mode). 2. Press the [VOL--] key to enter the Overall Adjustment mode. 3. Insert the CD adjustment disc (TDYS-1). 4. Put the main unit horizontal so that the upper panel becomes upside, and press the . key. 5. Wait until CD OK is displayed on the EL. 6. Insert the MD1/HiMD1 hybrid adjustment disc (MDW-74/GA2). 7. Put the main unit horizontal so that the upper panel becomes upside, and press the > key. 8. Wait until MD1 OK is displayed on the EL. 9. Insert the Hi-MD3 adjustment disc (HMD1GSDJ). 10. Put the main unit horizontal so that the upper panel becomes upside, and press the [VOL+] key. 11. Wait until HMD3OK is displayed on the EL. 12. Eject the disc and close the upper panel. 13. Put the main unit horizontal so that the upper panel becomes upside, and press the [VOL--] key. 14. Wait until OfstOK is displayed on the EL. 15. Press the x key and back to the Display Check mode. Flow of overall adjustment mode:
Overall Adjustment Mode
3-7. Resume Clear Procedure: 1. Enter the test mode (Display Check mode). 2. Press the [VOL+] key to enter the Manual mode. 3. Press the [VOL+] key once, press the > key once, press the [VOL--] key once, press the > key once, and press the [VOL+] key twice, press the > key three times to select the item number 1933. 4. Press the X key to resume clear. 5. Press the x key four times and back to the Display Check mode. 3-8. Releasing The Test Mode
Note: When the power supply is switched on in the state where all electrical adjustments have not finished, it is displayed on EL as Error EE and the usual operation cant be performed. When a power supply is accidentally turn off in the middle of electrical adjustments, it is again set as test mode and electrical adjustments is mode to complete.
0000
. key x key > key x key
AdjF**
CD Overall Adjustment Mode
****
CD Run
****
[VOL +] key
x key
MD1Run
****
[VOL --] key
x key
HM3Run
****
[DISPLAY/MENU] key
x key
OfsRun
0000
[T MARK] key
x key
OPChk
1911
ResOK?
20
BUFFER IC681
9 4 12 7
3Y 1Y 4Y 2Y
11 2 14 5 OVER WRITE HEAD DRIVE IC601 (1/2) 10 3 13 6 M703 OVER WRITE HEAD UP/DOWN 77 69 78 70 HB HBB HA HAB
XA/B XG
EFM 62 EFM_CLK 63
1 15 RF AMP, FOCUS/TRACKING ERROR AMP IC501 VREF 7 VREF10 11 10 13 12 IY IX JX JY A B C D 56 1 54 55 50 51 52 49 RF_IY RF_IX RF_JX RF_JY IY IX JX JY A B C D RFO 8 ABCD 40 FE 41 TE 42 ADFG 23 PD_NI 19 CLK 26 OFTRK 45 VC 38 VREF09 9 PEAK 48 BOTM 47 SBUS SCK SMON SSEL 33 32 21 31 92 ADIP_IN 39
84 OUTA 82 OUTB
CHOPPERCLK
EFMO
EFM_SEL XCS_EFM_CTL
104 ABCD 105 FE 109 TE 140 ADFG 94 APCREF_DA 160 FS256OUT 166 OFTRK 118 VREF_MON 106 VC 102 PEAK 103 BOTM 222 SSB_DATA 223 SSB_CLK 108 SE 186 RECPDLY 210 XRF_RST
15 A_C 14 D_C F 20 PD_BUF 18 PD_I OPTICAL PICK-UP BLOCK (ABX-U2) IIN 17 PDO_SOURCE
XRESET 35
43, 44 UO2 49 CPUI2 U M702 (SLED) W V 45, 46 VO2 50 CPVI2 47, 48 WO2 51 CPWI2 52 COM2 29 UO1 32 CPUI1 30 VO1 33 CPVI1 U M701 (SPINDLE) W V 31 WO1 34 CPWI1 35 COM1
NPPO 43
200 199
161 168
159 SLDU 154 SLDV 155 SLDW 146 SLVS 169 HI_Z_SLD
147 SPDU 149 SPDV 150 SPDW 148 SPVS 224 HI_Z_SPDL
STALL 22
198 XRST_MTR_DRV
CPWO2
CPWO1 CLV_MON_W
CPVO2 CPUO2
SLD_MON_W
SLD_MON_V SLD_MON_U
MZ-RH1
21
21
CLV_MON_V CLV_MON_U
55 54 53
38 37 36
CPVO1 CPUO1
MZ-RH1
MUTEON
(Page 23)
280
+
J301 i /LINEOUT
275 DIN B+ SWITCH Q351 VCO1 A/D CONVERTER, MIC AMP IC351 28 LIN 1 RIN SDT0 MCLK BCLK LRCK 7 9 8 10 272 271 274 273 ADDT FS256 XBCK LRCK
23 11 25 26 27
XMUTE 213
15 MICL 22 MICR
RMC_KEY
(Page 23)
248 SO3 249 SCK3 259 XCS_ADC 260 XPD_ADC UDP 282 DTL 287 UDM 283 262 255 256 257 XOPT_CTL OPT_DET XJACK_DET XMIC_DET CN441 (1/2) (USB) 3 DATA+ 2 DATA
DISPLAY DRIVER IC1 D0 - 7 A0 /RD /WR /CE3 D0 - 7 A0 /RD /WR /CE2 D0 - 7 A0 /RD /WR /CE3 /CE2
72 - 65
D0 - 7 SOUT SIN SCLK XCS 63 64 62 55 250 251 252 254 SI4 SO4 SCK4 XCS_DISPLAY X802 48MHz X801 22.5792MHz BUFFER IC452 REAL TIME CLOCK IC451 OSCIN 7 1 SIO 2 SCLK 12 CE OSCOUT 8 X451 32.768kHz
/RESET 45
268 XRST_DISPLAY
TH801
37 OEC3 X1 4MHz 38 OSC4 RESET SWITCH Q471 VC1 115 290 291 276 277 EEPROM IC891 2 5 6 1 SDO0 SCK0 FS4 XCS_PWR_IC SO SI SCK XCS
TEMP_MON
UOSCI
UOSCO
OSCO
OSCI
CS_RTC 189 SI0 SO0 SCK0 XCS_NV 178 179 180 220
OLED_VCC
OPEN_CLOSE_SW
HALF_LOCK_SW
LED_RED
PROTECT
VDD (DISPLAY)
WK_DET USB_WAKE
XHOLD_SW
HIMD_PROTECT
123 208
202
134
131
171
172
127
(Page 23)
REC_KEY
(Page 23)
MZ-RH1
XWK1
S1 - 8 (PANEL KEYS)
D2 (REC)
22
22
HALF_LOCK
S464 HOLD
MZ-RH1
(Page 22)
POWER CONTOL IC601 (2/2) SO0 SCK0 FS4 OSC_OUT 93 59 DATA 58 SCK 60 CLK
B (Page 22) D
(Page 22)
FCRAMVDD D983 DRAM_HOLD_DET 128 DRAM_ALONE 265 DRAM_VDD_CLR 263 DRAM HOLD DETECT Q982
(Page 22)
VCO1
VC1
71 - 75
DRAMVDD_DISCHG 266
106 13 14 61
VSTB_OUT VC VC VIF
VSTB_IN 105
VCO1
VB 27 HVB 8
3.3VREG
PH2 201
51 86 99 95 94 56 67
VBUS
B+ SWITCH Q606 B+ SWITCH CONTROL Q604 B+ SWITCH Q601 CHARGE CONTROL IC401 CHG_PWM CHG_CTL I_SEL1 I_SEL2 CHG_MON CHG_SEL IAMP_CAL IAMP_CTL IAMP_CAL_MODE USB CHARGE ON/OFF Q404, 405 CURRENT LIMITER Q406 XI_SENSE USB_CHARGE BATT_MINUS_MON 4 7 29 23 22 18 27 14 13 6 11 12 16 20 VI_CTL CHG_CTL I_CTL2 I_CTL3 A/D I_SEL IAMP_CAL IAMP_CTL A7CAL_SW VI TYPE1 IN1 TYPE2 I_CTL1 LITHIUM ION RECHARGEABLE BATTERY (LIP-4WM) 1PC. 3.7V/370mAh
XGUM_ON 181
S401 (BATTERY INSERT DETECT) MDVCC_CTL VBUS_VB_CTL XI_SENSE USB_CHARGE CHG_PWM CHG_CTL I_SEL1 I_SEL2 CHG_MON CHG_SEL IAMP_CAL IAMP_CTL IAMP_CAL_MODE
MDVCC
VBUS_VB_CTL
MDVCC_CTL 303 VBUS_VB_CTL 237 XI_SENSE 195 USB_CHARGE 209 CHG_PWM CHG_CTL I_SEL1 I_SEL2 CHG_MON CHG_SEL IAMP_CAL IAMP_CTL IAMP_CAL_MODE 211 238 196 197 117 205 212 239 177
BAT+ 31 VO 32 BAT 25 CHG_SW1 30 RS 24 CHG_SW2 5 CHARGE CONTROL Q402 CHARGE SWITCH Q401
MDVCC _CTL
VG
BATT_MINUS_MON 125
MZ-RH1
23
23
MZ-RH1
IC901 yd (CLT)
* Replacement of IC401, IC501, IC601 and IC701 on the MAIN board used in this set requires a special tool. MAIN board is multi-layer printed board. However, the patterns of intermediate-layer have not been included in this diagrams. Lead Layouts surface
IC451 8 (OSCOUT)
A : B+ Line. Power voltage is dc 3.7 V and fed with regulated dc power supply from battery terminal. Voltages and waveforms are dc with respect to ground under no-signal conditions. no mark : PLAYBACK ( ) : REC : Impossible to measure Voltages are taken with a VOM (Input impedance 10 M). Voltage variations may be noted due to normal production tolerances. Waveforms are taken with a oscilloscope. Voltage variations may be noted due to normal production tolerances. Circled numbers refer to waveforms. Signal path. E : PLAYBACK j : REC J : OPTICAL IN F : LINE IN d : USB input from PC G : USB output to PC N : MIC IN
Abbreviation CND : Canadian model
1 Vp-p 30.6 s
* Replacement of IC401, IC501, IC601 and IC701 on the MAIN board used in this set requires a special tool. The voltage and waveform of CSP (chip size package) cannot be measured, because its lead layout is different form that of conventional IC.
MZ-RH1
24
24
MZ-RH1
(1/7)
SLD_CON_W
SLD_CON_U
CLV_MON_U
CLV_MON_W
SLD_CON_V
CL742
CL747
CL741
CL743
CLV_MON_V
SLD_PWM
CLVN CL734
CL745
CL740
CL737
R705 2.2k
R706 2.2k
R707 2.2k
CL733
CL738
CL735
CL739
CL736
M702 (SLED)
C712 0.022
PWM2
WI2
VI2
CPWO1
CPVO1
CPUO1
CPWI1
COM1
CPVI1
VO2
WO2
WO2
VO2
UO2
UO2
UI2
C710 0.022 C708 0.022 CL732 CPUI1 CL731 WO1 CL730 CLVV CLVU CLV_PWM CLV_CON_W CLV_CON_V CLV_CON_U HI_Z_SLD HI_Z_SPDL XRST_MTR_DRV C705 0.1 VG C706 0.1 VCC VMR2 VMF2 BP701 R701 1k B5 B3 B6 B4 VO1 CL729 UO1 CL728 PWM1 CL727
CL749
CL751
CL750
CPUI2 SLEDV C715 0.022 CPVI2 SLEDU C714 0.022 CPWI2 C713 0.022 CL752 COM2 CL705 SLD_MON_U SLD_MON_V CLVW SLD_MON_W FFI FRI FCS+ FCSTFI L701 22H FO1 R708 0 RO1 CL760 FI2 TRI TRK+ TRKL703 22H FO2 R709 0 RO2 CL761 RI2 CSP (Chip Size Package) CL753 CPUO2 CL706 CL754 CPVO2 CL755 CPWO2 CLVV CL756 FI1 CLVU CL757 RI1 CLVN FOCUS/TRACKING COIL DRIVE, SPINDLE/SLED MOTOR DRIVE IC701 BD6608GLV-E2
V SLEDV SLEDU SLEDN M703 HD_DRVHD_DRV+ CLVW M701 (SPINDLE) U N CLVN CLVV CLVU
R702 10k
R703 10k
R704 10k
C717 0.47
CLVW
WI1 CL726 VI1 CL725 UI1 CL724 ST2 CL723 ST1 CL722 STALL
A1 A2
PGNDUV1
PGNDUV2
PGNDUV2
PGNDW1
PGNDW2
PGNDW2
NC
VMR1
XRST_RF
ABCD
VREF_MON
SSB_DATA
SSB_CLK
VMVW1
VMVW2
VMU2
VMU2
VMU1
L504 10H
VMF1
GND
(Page 26)
A3
VMVW2
PGND1
PGND2
SSEL
TE
FE
R505 0
CL532
CL534
(Page 28)
B2
CL537
CL533
CL535
CL539
CL536
L503 10H
R506 0
B1
C520 0.01
C519 0.1
L505
10H
C522 1
CL546
L501 10H
C716 1
C702 0.1
PLSE_XDC
CN501 26P CL501 TRK+ CL502 FCSCL503 FCS+ CL504 TRKL1 OFTRK L2 CL507 CONT CL508 PLSE_XDC CL509 PVCC CL510 IIN LDK CL512 (VREC(MDVCC)) MDVCC CL513 GND CL514 F CL515 VREF CL516 VCC CL517 S1 CL518 JY CL519 JX CL520 IY CL521 IX CL522 A CL523 B CL524 C CL525 D CL526 SO PD_SO D C B L502 10H C508 4700p R503 2.2k C513 4700p C515 10p RFI A IX IY JX Q502 2SC5383-TP-1F R513 47k JY PD_SI VREF F C501 0.1 C540 0.1 C541 4.7 6.3V Q501,502 B+ SWITCH C538 0.1 TP512 Q501 2SA2018TL C R511 47k R512 10k JX JX R510 10k JY JY IY IY A_C PDO_SINK A PDO_SOURCE CL545 R501 1k IIN R502 2.2k C CL531 AVCC IIN C542 1000p C543 4.7 6.3V D D MDVCC_CTL CL547 C546 0.1 C547 4.7 6.3V L506 10H A A B B CSP (Chip Size Package) PD_BUF CL544 PD_NI C532 4700p PD_I C524 1000p APCREF_DA FB501 XLDOM R515 100k R514 100k Q503 RT2C00M-TP LD CONTROL R517 100k BOTM PEAK CL530 OFTRK C516 CL529 BOTM CL528 PEAK RF AMP,FOCUS/TRACKING ERROR AMP IC501 SN761060ZQLR ADFG C528 0.047 WPP_LPF CL543 SMON F S_MON CDN ADIP 0.01 TON_C CCSL2 C527 0.047 CLK C526 0.1 TRK-1-2 NPPO AVCC2 FCS+ FCSR516 22k TRK+
VC
XRESET
ADIP_IN
VGIN
SSEL
FE
C518 0.1
OFC_C1
OFC_C2
VREF10
VREF09
RF_JX
RF_JY
RF_IY
RF_IX
AGND
C506 10p
C507 10p
C505 0.1
C504 0.1
C503 0.1
C511 0.1
C502 0.1
D_C
RFO
C536 0.1
C512 0.01
PS
EQ
IX
C509 0.1
R504 4.7k
VIN
VREF
C514 1000p
VC
JY
IX
IY
JX
IX
MZ-RH1
25
25
MZ-RH1
HPH
R682 470k
-2
C687 0.1
CL671
D684 MA22D1700LS0
W682 W681
VCC
XG
CL691
4B
4A
4Y
CL699
3A
3B
3Y
CL698
Q682 MCH6617-TL-E
XCE_EFM_CTL
REG5_REG
HPL
HA
HB
(2/7)
+1.2V REGULATOR
XA/B
1B
1Y
2B
1A
-1 CL681 S
-2
C686 0.1
2A
2Y
IC682 SN74LVC157ARGYR
GND
DRIVE SELECT
VOUT VIN
VSS NC
EFM_SEL
+1.5V REGULATOR CL696 IC608 XC6213B152NR R657 0 C642 1 R624 1M R629 220
IC604 TC7SL32FU(TE85R)
HNH
HNL
HBB
HAB
CL697
R658 1M
VCC
Q612 2SK354700LS0
FB681 A3 A2 A1
HA
HBB
HB
XRST1
RECP
CHOPPERCLK
EFMO
HAB
SCK0
SO0
FS4
C627 0.1
(Page 25)
R652 1M S
R653 0
R637 1M
VG
HAB
EFM
VCP
VBUSSEL2
VIF
EFM_CLK
VRECIN
VRECIN
RECP
DATA
NC_M12
PGND2
PGND4
PGND4
OUTA
VG2
VG3
OUTB
HBB
GND
GND
SCK
CL
CLK
HA
HB
CH
R639 220k
CL621
CL622
R650 0
USB_WAKE
R654 0
R641 470k
Q609 RT3WLMM-TP-1F
NC_A12 R601 22 USBHOLD RST OUT C601 2.2 PVBUS CL612 HOLD_OUT R602 22k RST_OUT
R640 470k Q610,611 A4 A5 B+ SWITCH Q610 MTM232230LS0 R643 470k R644 220k
REG5_OSC
C608 0.1 CRST DVDD_IN C604 22 6.3V DVDD_OUT VBUSREF L5_2 PGND5 PGND5 POWFB OVER WRITE HEAD DRIVE, POWER CONTROL IC601 SC901585VAR2 L5_1 PGND5 VBUSSEL CLM POWP2 INP3 INP2 CLP POWP1 VPDRV RF2 DTC2 INM2 INM3 DTC3 RF3 CL628 CL629 CL630 D610 NSR0320MW2T1G C631 0.01 R627 1k R631 2.2M L603 4.7H R630 2.2 CL619 R622 10 R623 1 R626 1 CL626 R635 0 C635 4.7 L604 100H C633 4700p C634 22 10V C609 0.1 HOLDC C605 22 6.3V OSC_OUT VBUS_DET
VBUS_DET
(Page 25)
S R642 100k D1
C606 22 6.3V SLEEP_IN R604 470k RST_IN R605 1M D604 MA2SD32008S0 PGND2 REG_IN REG_OUT
-1 -2 R645 470k R646 470k REG5 REG SUSPEND C610 0.1 C611 0.1
D3
SUS_IN PGND2 D605 MA2SD32008SD TSBV_IN REG5 TSBV C612 0.1 TSBV_OUT C613 1 V33R D601 MA2SD3100LS0 R603 220 2.1VREG_IN D607 MA2SD32008S0 D602 MA2SD32008S0 PGND1 VSTB_IN VSTB_OUT D608 MA2SD32008S0 C607 0.1 BATSEL V33RO
(Page 28)
D11 D8 D4 D5 D7 D6 D9 D2
R606 2.2M
VRECO_2
VRECO_1
DW_1B
VREFIN
DW_1T
PGND3
PGND1
PGND1
PGND3
PGND3
33USEL
VREC
NC_M1
NC_A1
UP_1T
UP_1B
UP_3B
V3O_1
L1_2
L1_1
L3_1
INP1
VOUT
VOUT
GND
VC
VC
L3_2
V3FB
(Page 30)
+1.5V REGULATOR IC606 BH15PB1WHFV-TR
V3O_2
DW_3T
DW_3B
VIN
VIN
CL607
CL608
CL609
CL610
CL618
CL603
(Page 27)
C1
S C616 1 L601 10H C615 10 10V C617 47 6.3V CL602 C618 0.01 C621 0.01 Q604 2SC5383-TP-1F B+ SWITCH CONTROL R616 470k R615 100k
R634 1M
VBUS_VB_CTL
C652 0.01
C646 1
C653 0.01
C649 1
XRST2
R614 100k Q603 2SC5383-TP-1F VBUS DETECT
USBHOLD2
RST OUT
XRST
R612 470k
(Page 30)
MZ-RH1
26
26
MZ-RH1
(Page 26)
(3/7)
Q441,442 VBUS LIMITTER Q441 RTQ035P02TR CL448 C1
CHG_I_SEL
CHG_MON
R444 220
R445 100k
VBUS_MON
XI_SENSE
I_SEL2
R447 1M
E5
C442 0.047
R448 470k
R410 2.2k
(Page 30)
Q406 DTC144EET1 CURRENT LIMITTER
D441 MA22D2800LS0
R442 10k
Q442 RT3WLMM-TP-1F
-1-2
C441 0.1
CL441 (VBUS 5V) CL442 CL443 CL444 CL445 (VBUS GND) CL446 CL447
TP441
CL423
CL422
C413 0.1
TP445 TP446
FB4402
FB4442 TP447
C4441 2200p
R4441 0
RS
UDM
I_CTL3
IAMP_CAL (CHASSIS)
R4442 0
I_SEL1
CHG_SW2
CHG_CTL
PWR_WAKE
WDT
BATT_MINUS_MON
XGUM_ON
R425 2.2M
R427 220k
R423 100k
VO
VI2
VG
PWT
VI_CTL
LED_ CTL
VI
CHARGE CONTROL
VB_MON CL408
TP401 LITHIUM ION RECHARGEBLE BATTERY (LIP-4WM) 1PC. 3.7V/370mAh W401 (BATT+) W402 (BATT-) TP402
R422 100k
E1 E2 S401 BATTERY INSERT DETECT R404 0.022 R405 2.2k R406 0 CHG_PWM CHG_CTL USB_CHARGE E3 S R407 100k E4 CL433
R403 1
C401 22 10V
C402 22 10V
C407 0.01
C408 0.1
C405 0.1
C410 0.1
C406 0.1
R402 0.47
Q404 MTM232230LS0
(Page 28)
E6
D401 NSR0320MW2T1G
R408 100k
MZ-RH1
27
27
MZ-RH1
(4/7)
D9 D8 D7 D6 D5 D4 D3 D2 TP964 CL964 (VB/DDC5) VDD
WK_DET HALF_LOCK REG5 TSBV XRST1 XRST2 RMC_KEY REC_KEY
VOUT GND CE NC
(Page 26)
D1 D11
CL961
C962 1
(Page 30)
C928 220 5V
R962 1M R961 0
CL965 (GND)
TP965
C930 22 10V
R930 47k
C931 0.1
C933 1000p
R921 220k
R923 470k
R925 470k
R920 10k
CL904 CL902 CL903 CL905
R927 100k
F3 F1 F2
TP911 CL911
L904 0
L905 220H
CL910
(Page 29)
R916 22k R917 22k
VB VG
R929 470k
XWK1 LVB VRMC XWK2 XWK3 HVB XWK4 VCO1 VSTB VO1 VC1 L1 L1 PGND1 PGND1 FFCLK
(Page 31)
C902 10 16V
R907 100k
C905 1
C909 0.1
XRST1 CRST1 XRST1ADJ CL920 DTC1 RF1 INM1 CIL POWER CONTROL IC901 SC901584EPR2
SLEEP CL963 CLK SL901 SEQSEL C943 2.2 WDT CL960 SCL CL959 STRB CL958 DATA VREF GND R937 2.2 REGI1 CL954 (REGO1) TP954 F5 R944 47k C949 2.2 R948 22k REGO1 REGC1 REGI2 CL951 (REGO2) REGO2 REG2G
MUTEON
C901 1
FS4
B6 B4 B3
D903 HRC0201ATRF-E
(Page 25)
D901 HRC0201ATRF-E
(Page 29)
CL950
REGC2
REGC3 REGO3 REGI3
(Page 27)
R902 470k
R941 100k
L2
L2
D905 HRC0201ATRF-E
CL944
CL943
C956 1
CL940
CL934
R939 4.7 REG03 B2 CL947 R912 47k (REGO3) TP947 C942 4700p R942 0 R943 47k C947 2.2 R952 22k R953 47k MUTEON
R903 100k
L903 220H
(Page 25)
C917 0.1
C920 47 6.3V
C921 22 10V
R913 100k
MZ-RH1
28
28
MZ-RH1
(5/7)
VCO1
C353 10 6.3V
R358 100k
C3353 0.1
VC1
R360 10
C358 0.1
R151 22k
R251 22k
TP352 DIN1 R354 100 R357 10k R359 1k TP353 TP354 R355 2.2k TP355 TP151 TP251 OPT_DET C154 100p C254 100p C369 100p C368 100p R356 2.2k TP356 FB3351 FB3352 FB1151 FB2251 FB3354 J351 LINE IN (OPT)
C355 0.1
CL251
R252 47k
XJACK_DET
R152 47k
DVSS
AVSS
DVDD
SDTO
AVDD
VCOM
RIN
CL353 BCLK CL354 MCLK CL355 LRCK R351 1k CDTI R352 1k CCLK CSN MVSS C363 0.1 MVDD C364 10 6.3V PDN MICR C156 0.1 IC351 AK5356VN-L MRF MVCM C359 2.2 6.3V C361 47 6.3V C360 0.1
(Page 31)
C3361 2200p R153 22k R154 10k R253 10k R254 22k R3351 100 TP152 FB1152 TP357
XPD_ADC
J352 MIC
PRENR
PREOL
PRENL
PREOR
C362 47 6.3V
MICL
PREL
PRER
C256 0.1
TP252 TP358
FB2252 FB3353
(PLUG IN POWER)
C253 4.7 6.3V C352 0.1 C153 4.7 6.3V C152 47 4V C252 47 4V C155 1000p C255 1000p D3302 MAZB068H0LS0
D3301 MAZB068H0LS0
D3303 EDZTE616.8B
F1 R312 0 F2 RMC_DTCK RMC_KEY VCO1 R310 1M C302 1 R3301 0 F301 0.25A 125V
D201 MA2S111-(K8).SO
0 0 47
XMUTE
D_ENREG
D_EN2
D_EN1
FS512
C311 0.1
F3
R304 0
(Page 28)
R301 0
MUTEON
TP101 TP201
CL307
CL308
CL310
CL306
CL309
+5.5V REGULATOR
R309 47k
ENREG
EN1
VDD
MCK
EN3
EN2
VSS
MODE_B BEEP DCLSOUTL DCLSOUTR R101 0 R201 0 CL302 BEEP_IN CL101 DIN2 CL201 DIN1 OUT_BEEP1 VSSO OUT1 IC301 CXD9847K
C105 0.1
VG
VDDO1
VREGO
VREG
VCONT
VREF
CFB
VDDO2
L201 47H
S C204 470 2.5V Q302 US6K1TR MUTING R308 1k R103 2.2k Q101 2SC5585TL R203 2.2k -2
CL303
CL304
CL305
Q101,201 MUTING
F5 D_VCONT_PWM R302 22k F7 F6 C306 10 6.3V C307 0.1 C308 1 C309 0.1 C303 100 6.3V C304 100 6.3V C305 47 6.3V C101 1 C201 1 C202 0.1 C203 0.22 C102 0.1 C103 0.22 C316 0.47 Q201 2SC5585TL
C317 0.1
R284 2.2k
R184 2.2k
(Page 28)
MZ-RH1
29
29
MZ-RH1
6-9. SCHEMATIC DIAGRAM MAIN Section (6/7)
1 2 3 4 5 6
See page 36 for IC Block Diagrams. See page 42 for IC Pin Function Description.
7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
(6/7)
XLDON USBHOLD2 XRST2 HNL XGUM_ON HI_Z_SLD XRST_RF HNH I_SEL2 HI_Z_SPDL USBDVDD_HI OFTRK RECP VBUS_VB_CTL XCE_EFM_CTR XRST_MTR_DRV XCS_PWR_IC XCS_REC_USB D_VCONT_PWM HIMD_PROTECT USB_CHARGE CHOPPERCLK LIME_SLEEP SLD_CON_U XCS_NV CS_RTC CHG_PWM RST_CONT XMUTE SSB_CLK I_SEL1 D_EN1 PLSE_XDC EFMO VBUS_DET CHG_I_SEL USB_WAKE SSB_DATA IAMP_CAL IAMP_CAL FS256OUT R842 0 PD_S1 SCK0 SI0 XI_SENSE LED_RED EFM_SEL PROTECT D_EN2 PD_S0 SSEL BEEP HPL HPH SO0
D10
R853 10k
C846 0.047
SL801
R858 0
R857 0
R854 0
(Page 26)
R847 470k
R843 0 CL8174 CL8164 CL8175 CL8173 CL8167 CL8165
R848 220k
TP8222 CL8220 CL8201 TP8232 CL8181 CL8208 CL8178 TP8183 TP8186 CL8191 CL8188 CL8187 CL8190
R850 220k
R849 47k
CL8217
CL8219
CL8216
CL8215
CL8207
CL8203
CL8206
B5
VBUS_VB_CTL
IAMP_CAL
VBUS_DET
XCS_REC_USB
XI_SENSE
USBIC_SLEEP
SSB_DATA
XRST2_DET
XCE_EFM_CTL
HI_Z_SPDL
CHGI_SEL
IAMP_CAL_MODE
USBHOLD2
XCS_PWR_IC
FS256OUT
SSB_CLK
RECPDLY
HI_Z_SLD
HIMD_PROTECT
PROTECT
XRST_MTR_DRV
USB_VDD_SW
XCS_USB_DRV
XCS_REC_DRV
D_VCONT_PWM
USB_CHARGE
CHG_CTL IAMP_CTL
CHOPPERCLK
RST_CONT
CHG_PWM
LED_GREEN
USB_WAKE
XGUN_ON
LED_RED
(Page 25)
SLD_MON_W SLCW SLD_MON_V SLCV SLD_MON_U SLCU SLD_CON_W SLDW SLD_CON_V SLDV CLV_MON_W SPCW CLV_MON_V SPCV CLV_MON_U SPCU CLV_CON_W SPDW CLV_CON_V SPDV CLV_PWM SPVS CLV_CON_U SPDU SLD_PWM SLVS FS4 FS4 FRI FRDR FFI FFDR TFI TFDR TRI TRDR ADIP ADFG VIN VINP CL8138 C842 0.1 C843 0.1 C841 0.1 TP8135 C840 0.1 C853 0.1 XRST HALF_LOCK ADC3EXTC CL8137 ADC3VREFL CL8136 ADC3VREFH CL8135 XRST
TEST
EFM_SEL
LOPEN
I_SEL2
HSALF
TEST2
I_SEL1
PD_S0
JTAG1
XRF_RST
JTAG0
PD_S1
MNT4
EFMO
SCK0
HPL
NC
XLSRCK
D_EN1
MNT2
HPH
SI0
RECP
MNT5
MNT1
XCS_NV
MNT6
D_EN2
XMUTE
CHG_CTL IAMP_CTL
D_ENREG D_ENVREG TP8241 TP8242 TP8243 TP8244 TP8245 TP8246 TAT TAN NAR IDO SAK RTCK SI3 SO3 SCK3 SI4 SI4 SO4 SO4 SCK4 SCK4 EV_VDD_CTL EL_VDD_CTL XCS_DISPLAY XCS_DISPLAY OPT_DET XJACK_DET XMIC_DET CL8255 OPT_DET CL8256 XJACK_DET CL8257 XMIC_DET CL8258 XCS_ADC XCS_ADC XPD_ADC XPD_ADC PAUSE PAUSE_KEY XOPT_CTL XOPT_CTL DRAM_VDD_CLR XDRAM_VDD_SEL DRAM_ALONE CL8263 DRAM_VDD_CLR CL8264 XDRAMVDD_SEL CL8265 DRAM_ALONE CL8266 DRAMVDD_DISCHG CL8267 XRST_DISPLAY XRST_DISPLAY CL8269 PC2 R885 0 FS256 FS256 ADDT ADDT LRCK LRCK XBCK XBCK DIN1 DIN C847 8p C848 10p FS512 DCLSOUTR DCLSOUTR DCLSOUTL DCLSOUTL RMC_DTCK UDP UDP UDM UDM R865 1k E5 SUSPEND SUSPEND DTL R873 100k R866 1k RREF R867 10k VSENS CL8281 RMC_DTCK FB864 X801 22.5792MHz OSCI R861 NM OSCO R863 1k FS512 CL8270 EX512 PCB DOUT CL8248 SO3 CL8249 SCK3
CS_RTC
OFTRK
PWM4
MNT3
MNT0
HALF_LOCK_SW SL802(TEST) XTEST REC_KEY XREC_KEY OPEN_CLOSE_SW OPEN_CLOSE_SW JOG_B JOG_A DRAM_HOLD_DET XHOLD_SW XHOLD_SW RMC_KEY RMC_KEY CL8125 BATT_MINUS_MON CL8124 VBUS_MON WK_DET WK_DET C839 0.1 HIDC_MON R833 0 DCIN_DET SYSTEM CONTROLLER,DSP IC801 CXD2687-001GG CSP(Chip Size Package) SET_KEY_2 SET_KEY1 SET_KEY_1 C838 VREF_MON CL8117 CHG_MON CL8116 VB_MON CL8115 TEMP_MON CL8114 ADC1EXTC C836 0.01 APC C835 0.01 ADRT TH801 AUX2 AUX1 TE TE S_MON SE ADRB VC VC FE FE ABCD ABCD BOTM BOTM PEAK PEAK PLL3EXTCO PLL3EXTCI CLTV R817 1k FILO FILI PCO2 PCO APCREF_DA APCREF_DA C866 0.01 RFI DACVREFH RFI C830 0.47 ASYI C829 0.01 ASYO EBIFVSS6 EBIFVDD6 EBIFVSS5 EBIFVDD5 EBIFVSS4 EBIFVDD4 EBIFVSS3 EBIFVDD3 EBIFVSS1
USBAVDD330 USBOSCVDD USBAVDD331 USBAVDD152 USBAVDD150 USBAVDD151 DACDVDD25 MSJTAGVDD USBDVDD151 USBDVDD15 DRAMVDD3 DRAMVDD0 DRAMVDD1 USBDVDD0 DRAMVDD2 DRAMVDD4 DRAMVSS1 USBAVSS1 USBAVSS2 USBAVSS4 DRAMVSS0 DRAMVSS2
SLDU
HNL
HNH
PH10
BEEP
PH7
PH2
SO0
RF5
RF4
NC
NC
D801 MA2SD32008S0
R837 10k
BATT_MINUS_MON VBUS_MON
REG5_REG
SET_KEY2
0.01
VREF_MON CHG_MON
VB_MON VC1
(Page 27)
USBHOLD USBHOLD USBOSCE C849 10p C850 10p UOSCO R871 470 FCRAMVDD0 L804 22H H2 H1 CL8296 FLASHVDD0 FLASHVSS0 CL8298 CL8299 CL8300 CL8301 CL8302 MDVCC_CTL MDVCC_CTL CL8304 EL_PWR_CTL EL_PWR_CTL EBA1 EBA2 EBA11 EBA13 EBA18 EBA22 EBD0 EBD1 EBD3 EBWE2 EBWR1
DVDD10 DVDD11 DVDD07 DVDD02 DVDD04 DVDD03 DVDD00 DVDD05 DVDD08 DVDD06 DVDD01 DVSS10 DVSS13 DVSS14 DVSS02 DVSS03 DVSS07 DVSS00 DVSS05 DVSS08 DVSS01 DVSS06 DVSS09
C851 47 6.3V
C834 0.1
R821 R822 2.2M 1M C833 0.1 R820 220 R818 R819 2.2k 1k C832 1
(Page 31)
CL8096
R816 220k
C852 22p
VC3_CTL
R812 10k
R813 100k
EBIFVDD1
EBIFVSS0
USBAVSS0
USBAVSS3
USBAVSS5
FEPLLVDD
RFADVDD
FEPLLVSS
USBDVSS
PLL1VDD
SVADVSS
MAIFVDD
MADVDD
PLL1VSS
TSMVDD
OSCVDD
MADVSS
ASYVDD
DACVSS
ASYVSS
USBIFVDD
SVADVDD
DACVDD
RFADVSS
IFVDD0
DCVDD
IFVDD1
IFVDD2
IFVDD3
DCVSS
VSS1
VSS2
VSS0
IFVSS0
IFVSS1
TP8064 CL8001
CL8044 CL8035 CL8039
(VCO2/REG4) CL8033
2.2
C806 10 6.3V
R803 0
C854 1 Q802 2SC5383TP-1F R872 4.7k TP8001 R876 0 DISCHARGE SWITCH R875 0 R879 0 R881 2.2k +1.2V REGULATOR IC802 R1180N121C-TR-FA VCC C801 0.1 VOUT C819 2.2 C821 2.2 C823 2.2 R874 68 R802 0 R804 0 R805 0 L802 0 R806 0 R807 0 R808 0 R809 0 R810 0 R811 0 R877 47k GND NC NC
C808 10 6.3V
C810 10 6.3V
C812 10 6.3V
C814 10 6.3V
C816 10 6.3V
L803 0
C865 1
G1 G2
L801 0
(Page 26)
MZ-RH1
30
30
Note: IC801 on the MAIN board can not be exchanged alone. When IC801 on the MAIN board is damaged, exchange the complete MAIN board.
2.1VREG_IN
REG5_REG
REG5_TSBY
REG5_OSC
(Page 28)
REG4_DVDD
REGO3
REG_F
MZ-RH1
6-10. SCHEMATIC DIAGRAM MAIN Section (7/7)
See page 24 for Waveforms. See page 36 for IC Block Diagrams.
REG5_TSBY
REG5_REG
(7/7)
CN471 18P CL488 NC CL487 NC CL486 LED_RED CL485 SET_KEY_2 CL484 SET_KEY_1 CL483 REC CL482 SDO(OLED-LCD_SI) CL481 SDI(OLED-LCD_SO) CL480 SCK CL479 XCS XRST CL478
R472 4.7k
R471 4.7k R493 1k R473 4.7k Q475 RT1N144U-TP-1 LED DRIVE CL490 C456 0.1 X451 32.768kHz SET_KEY_2 SET_KEY_1 REC_KEY R475 100 D471 HRC0201ATRF-E R474 100 R476 100 SO4 SI4 SCK4 XCS_DISPLAY
/INTR OSCIN
LED_RED
C457 0.1
TP471 TP472
XRST_DISPLAY WK_DET TP473 PAUSE C451 0.1 CS_RTC CL458 CE C452 0.1 CIN VSS
(Page 35)
CL477 XWK CL476 PAUSE DGND CL474 OLED_VCC OLED_VCC CL472 VDD SGND C4481 0.1 -1-2 C471 0.1 R490 47k Q471 RT2C00M-TP RESET SWITCH R478 220k
OSCOUT
IC451 R2061K01-E2
SCLK
/VDCC
BUFFER IC452 TC7SZ126AFE CL459 GND VC1 R477 100k SO0 R455 0 C460 47 10V R452 220k
C473 1
SI0
R451 0
VCC
C472 2.2
SCK0
SGND R485 0
(Page 29)
R480 22
D472 HRC0201ATRF-E
L471 22H EEPROM IC891 AK6588CU-L -2 FB EXT XCS_NV XCS SI0 Q474 MUN5314DW1T1 GND R891 0 SO VCC XHOLD SCK SO0 SI C891 0.1 C892 100p CL891 R896 0
SIO
D451 MA2SD32008S0
R454 0
(Page 28)
R481 470k
C475 10p
IC472 XC9103D092MR
-1
VDD R482 10k Q472 RTR025N03 R483 100k R484 47k C476 1 R486 220k Q473 MTM232230LSO S R487 100k R488 1M Q473,474 B+ SWITCH CE
XWP GND
SCK0
(Page 30)
R998 0
SL462 S465 (Hi-MD PROTECT DETECT) HIMD_PROTECT (PROTECT) +2.2V REGULATOR IC982 R1180Q221B-TR-F CL982 D983 MA2Z748001S0 CL984 Q984 MTM232230LS0
VDD VOUT
CL981
D981 MA2SD32008S0
S462
C985 1
S Q982 MUN5314DW1T1G DRAM HOLD DETECT R986 47k Q983 MUN5314DW1T1G LEVEL SHIFT R989 220k
(OPEN/CLOSE) Q981 RT1N144U-TP-1 REGULATOR ON/OFF C983 0.01 C982 1 R981 1M C984 0.1
VIN
D982 MA2SD32008S0
R982 100k
-1 -2
-1 -2
VSS
NC
R984 100k CL983 R985 220k R987 10k C988 0.1 R988 2.2M XDRAM_VDD_SEL DRAM_HOLD_DET DRAM_ALONE DRAM_VDD_CLR
XHOLD_SW
R983 10k
MZ-RH1
31
31
MZ-RH1
6-11. PRINTED WIRING BOARD MAIN Board (Component Side)
1 2 3 4 5
Semiconductor Location
Ref. No. Location D101 D201 D607 D608 D984 D3301 D3302 IC302 IC802 IC804 IC891 Q982 Q983 Q984 C-4 C-3 C-6 C-6 F-4 C-3 D-2 E-4 E-5 E-6 E-5 F-5 F-5 F-4
A
TP441 L604 L201 L101 C103 C203 C202 TP352 TP446
C102
TP445
TP964
TP301
TP201
D201
A K C204 + C104 + C830 R812 R813 C829 L601 TP601
D3301
L803
K K A TP101
A K K A K TP947
TP473 TP8135 R808 C812 + L802 R865 R866 R867 R809 C819 C821 C840 C841 TP472
D101
D607
C837 A A
C
FB3305 FB3304 FB3303 FB3302 TP302
TP305
TP304
A K K
D3302
K K A
F301
TP152 R153 R154 + C366 TP358 TP954 R842 4 C302 C301 2 1 C892 R301 3 4 C361 R891 C854 3
TP8186 TP8183
IC802
5 4 1
C868 5
R870 4
E
C360 C152 + R3351 TP356 R356 C368 TP252 R254 R253 FB1151 C252 + TP151 R251 R252 C254 R152 C154 C151 +
IC302
C867 R887
IC804
1 3 TP8001
R896
R151 C251
IC891
Q983
1C 2B 2E R989
R895
R990
D984
A TP447
TP951
TP357
FB2251 FB3354
Q984
R988
R707 R706
Q982
R986
1E R985 1B 2C
1C 2B 2E
TP251
TP512 TP8066
TP354
TP402
TP401
C853
R831
D608
1-869-680-
11 (11)
MZ-RH1
32
32
MZ-RH1
6-12. PRINTED WIRING BOARD MAIN Board (Conductor Side)
1 2 3 4 5
Semiconductor Location
Ref. No. Location Ref. No. Location IC681 IC682 IC701 IC801 IC901 IC961 IC981 IC982 Q101 Q201 Q301 Q302 Q351 Q401 Q402 Q404 Q405 Q406 Q441 Q442 Q471 Q472 Q473 Q474 Q475 Q501 Q502 Q503 Q601 Q603 Q604 Q606 Q608 Q609 Q610 Q611 Q612 Q613 Q681 Q682 Q802 Q901 Q902 Q981 C-4 D-4 F-5 D-6 H-7 G-6 G-7 G-7 C-8 B-9 B-8 C-8 G-8 I-4 I-4 G-5 G-5 H-5 A-6 A-6 G-2 H-2 H-1 G-1 I-4 G-4 G-4 E-4 B-3 B-2 A-2 A-1 D-3 D-2 D-2 C-1 D-2 D-2 B-4 B-4 E-3 I-6 H-9 F-7 D401 D441 D442 D451 D471 D472 D601 D602 D603 D604 D605 D610 D681 D682 D683 D684 D685 D686 D801 D901 D902 D903 D904 D905 D906 D981 D982 D983 D3303 IC301 IC351 IC401 IC451 IC452 IC471 IC472 IC501 IC601 IC602 IC604 IC605 IC606 IC607 IC608 I-5 B-6 A-6 E-1 H-2 I-1 D-2 C-4 D-4 C-4 C-4 B-1 A-4 B-4 B-4 A-5 B-4 C-5 D-4 H-6 H-9 H-8 H-6 H-8 I-8 F-7 F-7 F-7 C-9 D-8 E-8 H-5 E-2 E-2 G-2 H-2 H-3 C-3 B-3 B-3 C-1 C-8 C-8 B-1
R441
R446
R445
C442 G D D
Q604
D442 K
BCE
R616
R634
IC602
4 3 R602 C629 8 5 Q601
FB4442
CL448
1C 2B 2E
R444
C681
C615
D684
C682
S K
D A
FB686 1S 1G 2D
R681
W682
R447
R615
C630 1 3 2 1
1E 1B 2C D R442 K
CN4418 (USB)
ECB
Q606
Q441
CL8124 S D
Q682
C614
R608
C616
R204
R206
C843
C842
CL928 R624
CL610 R629
FB685
R811
R606
R682
Q603
CL629
CL619
ECB
CL8130
CL8135
R833
C621
CL8281
C603
D682
R885
C849
R873
D686
R807
FB692
C613
R635 1 3
C631
29 28 26 24 21 17 13 9 32 33 34 35 37 38 41 42 45 46
4 5
R872
R871
IC605
C635
C649
CL681
CL8267
2G 5 4 1D
Q302
CL608
R627
C816 +
L603
C607
C611
19 20 1
R626
R623
R622
CL626
C810 +
C848
R863
R646 R645 1C 2B 2E
D605
A K
C690
C686
R630
IC681
2 CL691 CL689
CL8035
C646
C
Q611
11 10 9 CL8296
5 4
IC606
R631
52 53 54 55
91 90
D604
C315
49 50
X801
R805
CL8129
Q610
C612
+ C806
R803
R643
CL8188
R650
R651
C311
10
CL8304
CL8300
R644
R642
G CL625
57 58 60 62 65 69 73 77 80 82 84 85
7 CL687
CL8033
CL310 22
21
15 14
S DG
R804
R610
CL622
C608 R604
CL8208
Q612
CL8178
C808 +
R654 CL621
R603
C639
+ C604 CL699 15
IC682
2 16 1
CL309
D603
CL696
IC801
CL8167
IC301
CL304 1 CL302 7
C101
1E 1B 2C
CL624
R304
56 59 61 63 66 70 74 78 81 83 87 86
C610
CL305 + C304 8
C606 +
C605 +
R652
R653
Q609
C687
R640
R639
CL101 CL201
1B 2C
2B 2E
R637
S DG
CL671
CL670 CL8125
R451
C835
R826
C834
C836
Q608
G S R878
CL8071
C826
CL8294 L804
R816
Q613
CL620 1E
1C
R641
R605
C609
C852
C201
SL802 (TEST)
D601
CL698 9
CL690 8 CL688
C308
R302
89 88
C851 +
R837
CL8215 R876
C451
R101
R830
ECB
1 12
3 10 9 7
X451
R877
IC452
CL459 1 3
R881
C838
CL8177 CL8266
CL8190
CL8207
C362 +
R848
R847
C846
R843
R821
R818
R849
C156
Q503
R857
R854
R853
R822
R518
R819
IC451
R452
CL460
CL8217CL8219 CL501 1C
TP8243 1B E L801
C457
C456
CL458 K A
R516
R517
D451
R454
OPTICAL PICK-UP BLOCK (ABX-U2)
CL513
D983 K
L505
L504
C354
C153 +
C542
R701
C706
ECB
R982
CL8128
C702
C705
2 25 11 1 10
28 37 31 30 29
36 21 22 26 27
38 9 20 32 50
55 40 54 42 61
54 48 47 4 3
39 41 14 45 43
5 6 15 46 44
C984
D982
K K A A CL8181 CL8265 CL8255
10 CN701
C352
Q981
C982 CL981 1 1 3 4 2 C983 R981 2
C501
CL524
R708
Q471
R709
1C
R477
R359
CL526
CL733
R490
R478
C471
CL961
CL534
L502
C516
L506
R408
CL491 CL492 3
C473 1
CL533 C520
CL528 CL530
R505 C518 43 42 40 44 41 38 39 18 13 16 19 14 15 17
CL539
R513 R512
C962
C947
R489
Q474
L701
R475
R950
R901
R406
C405
C406
C407
C526
R414
C410
C901
R945
R941
R488 C472
Q472
S D G
5
C528
C961 C950
C415
CL950 49
A 33 CL932 32
R508
C527
Q473
R485
C510
C511
C512
R410
C413
R916
R917
R504
R422
C534
R503
C513
C514
BCE
R409
C476
R423
R425
R486
R476
R471
R472
R487
ECB
R929
R402 CL8116
C943
L501
R428
CL423 CL429
CL426
R905
L471
IC472
CL544 + C535
R427
C532
C412
Q406
R944
CL527 CL545
R502
CL546
C949 R937
C944
D904
R949 R948
R938
CL924
IC901
A C911 CL920
R404
CL959 CL960
R907
D471
C515
R501
CL541
C902 +
D903
C402 +
C4481
C460
C954
D472
R483 R484
C475
C401 +
Q475
R403
R921 C933
CL488
R493
C931
CL478
CL476
CL480
CL482
CL484
CL424 E B
64 CL963 1 CL903
17 CL905 CL907 K 16 A
C909
W401 (BATT+)
C930
R923
CL472 1
CL486 18
C928 +
D R480 CN471
A S
CL909
R927
Q401 Q402
C G
R936
R481
R482
C474
CL425
R928
R925
CL904
R920
D906
L904
R931
D401
R930 R401 S462 (HARF LOCK)
1C 2B 2E
R461
Q901
1E 1B 2C
C908
IC401
C905
C508
C524
CL543
CL422
R411
C955
CL414
CL951 (REGO2)
R908 R906
C913
1 2 7 8 13 14 17 18 21 22 27 28
3 4 5 6 9 10 11 12 15 16 19 20 23 24 25 26 29 30 31 32
D901
W402 (BATT)
D902
R312
R903
CL418 CL413
BCE
CL540
C408
R902
D905
C917
2C
2E
C504
C523
R951
1B
2B
CL536
R405
L703
C503
54 51 55 52 56 53 1 4 2 5 3 6
48 49 50 7 8 9
45 47 46 11 10 12
37 36 35 22 21 20
34 33 32 25 24 23
31 30 29 28 27 26
Q404
1E
1C
C502
CL537 CL538
IC471
CL547
IC961
1E 1B 2C CL433
CL964 (VB/DDC5)
R357
C536
C920
R506
R953
IC501
C519 C522
BCE CL535
+ C547
C541 +
BP701
R962
CL982
Q405
R358
Q502
CL749 CL724
IC981 R961
Q351
BCE
2C
R510
R511
C546
C540
4 3
CL734
R407 CL756 1C 2B 2E
R354
CL525
CL523 BCE
59 17 23 35 51 19 12 13 58 7 57 34 52 62 63 8 16 50 64 33 49 24 60 18 CL757 CL732
CL743
CL761
Q501 CL723
IC701
CL751 CL760
C985
IC982
C3353
D981
R361
R351
C355
C801
CL8001 (VCO2/REG4) CL728 CL727 CL755 CL753 CL725 CL737 CL739 CL726 CL722 CL738 CL740 CL742 CL741
R806
TP8064
C832
R352
IC351
7 8 14 15
C256
TP8065 (VCO1/REG5)
C358
C255
C155
R817
C253 +
Q802
CL8220 CL8301 FB864 + C364 C363 + C359 FB1152 J302 MIC PLUG IN POWER
R353
CL8115
R879
R201
C452
TH801
D801
C8201
C310 +
CL8165
CL958
C601
C305 +
R874
R455
CL8044
R601
296 248 250 93 137 270 268 82 291 290 44 285 284 54 283 282 55 9 61 49 48 286 59 275 271 273 274 272 287 10 288 289 60 24 50 58 57 56 53 7 259 52 91 46 51 39 257 117 139 43 115 123 121 119 281 132 134 122 135 260 261 263 265 267 262 266 264 258 256 315 316 79 81 111 276 254 127 125 255 108 277 96 269 35 129 124 126 128 130 36 133 131 45 136 94 32 110 47 251 252 84 253 29 28 312 90 241 13 118 120 138 11 30 23 25 6 92 188 80 300 14 247 8 311 95 245 83 40 27 196 12 204 190 249 31 105 243 15 34 103 198 302 215 106 5 101 240 116 38 149 210 304 213 242 26 100 238 85 4 114 202 88 86 244 33 159 297 98 235 17 200 294 292 167 37 158 2 246 298 293 194 217 219 1 3 310 144 69 239 299 295 192 314 207 183 107 165 306 141 76 18 87 22 78 170 89 20 70 64 237 186 313 72 71 303 305 301 172 174 176 178 63 62 140 236 109 102 143 209 73 74 112 113 146 181 66 203 308 309 77 307 99 97 152 173 201 187 104 223 205 189 175 169 171 216 221 225 227 229 231 233 180 185 142 154 150 148 156 147 65 21 191 199 197 195 193 179 177 218 224 220 228 226 234 278 42 208 206 67 162 164 153 155 151 145 211 212 214 75 182 184 68 19 230 232 280 279 41 16 168 222 166 160 163 161 157
C652
R810
C847
Q101
R104 C105
R103
IC601
CL683
D602
C866
CL8258
CL8096
1S CL103
CL8284
CL8270 CL612
CL8059
R648
IC607
BCE R106 R105
CL311 C313
R306 C314
C205
R656 4 4 5
C642
CL603
CL630 CL618
CL602 C618
Q681
R4442
R649
FB4402
C850
R617
R647
R657
CL609
CL617
C685 +
1D
2D
CL8136
R658
R614
C627
C617 +
FB681 C691
CL8269
CL8137
CL8138 C839
C317
IC608
R613
C634 +
CL447
R612
CL601 (VREC)
D685
A
W681 D683
K
CL442
1 CL444
CL313
R203
Q201
ECB CL203 2D 1G
R205
D610
2S
FB2201
IC604
C684
2G
R448
C441
1D
R308
C316
D681
Q442
C4441
Q301
D441
(AEP)
FB3301
CL443
R309 2S
C633
K
CL351 + C303 C3361 FB3353 FB2252
CL8264
D3303
C309
CL8114
CL303
R984
C353 +
CL943 R912
CL940
C921 CL934
CL8256
R355
C369
Q902
10 U N U N
LITHIUM ION RECHARGEABLE BATTERY (LIP-4WM) 1PC. 3.7V/370mAh
(Page 34)
W M702 (SLED) V
M
M703 OVER WRITE HEAD UP/DOWN
W M701 (SPINDLE)
Note: IC801 on the MAIN board can not be exchanged alone. When IC801 on the MAIN board is damaged, exchange the complete MAIN board.
MZ-RH1
33
33
MZ-RH1
2
OLED BOARD (SIDE A)
A
R4 S8 39 CN2 S1
REC .
39
CN1
R5
C4
38
38
C1
X1
B
C10 S2 S6 S4 S3
R9
R2
11
D2
(REC) S8
FR R N/ENT
1-869-482-
(11)
S2 7
VOL
(JOG)
r FF
D
R13 R14
R11
R12
TP37
C15
R10
CN3
D1
+ C13 C14 +
C12
TP32
IC1
C11
TP33
R16
E
A
MAIN BOARD CN471
R15
C2
C3
TP10
92
93 99
100 1-869-482-
11 (11)
(Page 33)
Note: IC1 and S8 on the OLED board can not be exchanged alone. When IC1 and S8 on the OLED board are damaged, exchange the complete OLED board.
MZ-RH1
34
34
MZ-RH1
CN2 39P VSS NC VCC TP32 VCOMH TP33 IREF VDD D7 D7 D6 D6 D5 D5 D4 D4 D3 D3 D2 D2 D1 D1 D0 D0 R15 220k R16 1M
XWR TP18
TP17
TP16
VDD XRD E(XRD) XWR R/XR A0 D/XC EL2 EL DISPLAY MODULE XCS BS2 BS1 XRESET CE2
TP19
XRD
CE2
CE3
R14 4.7k
R13 2.2k
R12 1k
R11 470
R31
R34
R27
SEG14
SEG12
SEG7
SEG4
SEG11
SEG1
R51
R37
SEG9
SEG6
SEG16
SEG15
SEG10
SEG8
SEG5
SEG13
SEG3
SEG0
R25
R36
R35
CE3
CE2
R30
WR
SEG2
R26
R50
A18
VSS VDD VCC NC NC NC(VBREF) NC(RESE) NC(FB) VDD VDDB NC(GDR) VSSB VCOMH VCC VDD VSSB VSS CN1 39P VSS NC VCC TP20 VCOMH TP31 IREF R4 220k VDD D7 D7 D6 D6 D5 D5 D4 D4 D3 D3 D2 D2 D1 D1 D0 D0 VDD XRD E(XRD) XWR R/XR A0 D/XC EL1 EL DISPLAY MODULE XCS BS2 BS1 VSS VDD VCC NC NC NC(VBREF) NC(RESE) NC(FB) VDD VDDB C1 1 20V C3 1 C4 1 20V C2 1 XRESET CE3 SEG50 SEG49 SEG47 SEG48 SEG46 SEG45 SEG44 SEG43 SEG42 SEG41 SEG40 SEG39 R5 1M C14 1 20V C11 1 C13 1 20V C12 1 SEG17 SEG18 SEG19 SEG20 SEG21 SEG22 SEG23 SEG24 SEG25 SEG26 SEG27 SEG28 SEG29 SEG30 SEG31 SEG32 SEG33 SEG34 SEG35
A15
A14
A13
A10
A17
A16
A12
A11
RD
C15 0.01
A9 A8 A7 A6 A5 A4 A3 A2 A1 TP21 A0 TP22 D0 TP23 D1 TP24 D2 TP25 D3 TP26 D4 TP27 D5 TP28 D6 TP29 D7 TP36 SIN DISPLAY DRIVER TP37 SOUT TP38 SCLK TP39 P13 CSP(Chip Size Package) TP40 P14 P15 P16 P17 TP14 K00 XCS K02 K03 K04 K05 K06 K07 K10/EVIN K11//BREQ MCU//MPU /RESET TP30 TP12 REC T MARK + VOL S1 S2 S5 S4 S3 R9 1k R8 470 TP15 OLED_VCC OLED_VCC VDD SGND TP41 XRST XWK PAUSE DGND XCS SCK SDI(OLED_LCD-SO) IC1 S1C88317D04H000 SDO(OLED_LCD-SI) D7 REC D6 SET_KEY1 D5 SET_KEY2 D4 LED_RED D3 D2 D1 D2 CL-270HR-C-TSL (REC) NC TP35 NC D0 A0 DISPLAY/ MENU FR T /ENT (JOG) R10 1M D1 BAT54XV2T1 CN3 18P t FF CANCEL S7 S8 S6
(Page 31)
COM19/SEG63
COM18/SEG64
COM17/SEG65
COM22/SEG60
COM20/SEG62
COM21/SEG61
COM16/SEG66
COM27/SEG55 COM26/SEG56
COM13
COM15
COM14
COM12
COM11
COM10
COM7
COM4
COM3
COM1
COM2
COM8
COM9
COM6
COM5
COM0
OSC3
OSC4
VD1
VDD
VC5
VC3
VC1
C5 0.1
VSS
VC4
CD
CE
CC
CB
CA
VC2
TP10
TP8
C6 0.1
MZ-RH1
35
35
Note: IC1 and S8 on the OLED board can not be exchanged alone. When IC1 and S8 on the OLED board are damaged, exchange the complete OLED board.
MZ-RH1
IC351 AK5356VN-L
PREOR
PRENR PRER
PREL PRENL
PREOL
21
VDD MCK VSS
20 19
18 17
16
15
MICR 22 RESET MVDD 23 MVSS 24 CONTROL REGISTER INTERFACE 13 CSN 12 CCLK 11 CDTI 14 PDN
28 27 26 25
24 23 22
MODEB 1
CONTROL LOGIC
21 TRIG
MICL
REGULATOR
A/D CONVERTER
BEEPIN 2
LEVEL SHIFTER
DIN2 3
LEVEL SHIFTER
LEVEL SHIFTER
VCOM 1
RIN
2
VCOM
3
AVDD
4
AVSS
5
DVSS
6
DVDD
7
SDTO
DIN1 4
LEVEL SHIFTER
LEVEL SHIFTER
18 CVG OBEEP1 5 VSS 6 OUT1 7 HP AMP (N-N) HP PRE DRIVER HP PRE DRIVER HP AMP (N-N) BEEP AMP BEEP AMP 17 OBEEP2 16 VSS 15 OUT2 BAT 25 LINE/ECO AMP (P-N) LINE/ECO PRE DRIVER LINE/ECO PRE DRIVER LINE/ECO AMP (P-N) RF1 26 16 TYPE2 IAMP_CAL 27 15 CFB 8 VDD1 9 10 11 12 13 VREGO VREG VCONT VREF CFB 14 VDD2 AMP_SEL 28 + 14 IAMP_CTL A/D CONVERTER
IC401 MM1690LCBE
I_SEL AD_SEL I_CTL3 I_CTL1 PGND GND A/D RS
24
23
22
21
20 19 18 17
+ + I_CTL2 29 CHG_SW1 30 BAT+ 31 VO 32 TIME DIVIDER SWITCHING SWITCHING CIRCUIT DET COMPARATOR BLOCK CHARGE CONTROL ON/OFF OSC VREF VREF
13 A7CAL_SW
CONTROL RECEIVER
LED_CTL
1
VI2
2
VG
3
PWT
4
VI_CTL
5
CHG_SW2
6
VI
7
CHG_CTL
8
PWR_WAKE
MZ-RH1
36
36
MZ-RH1
IC451 R2061K01-E2
VSS
12
11
10 9 /INTR
SIO 1 SCLK 2
LEVEL SHIFTER REAL TIME CLOCK DELAY BATTERY VOLTAGE MONITOR VOLTAGE DETECTOR VOLTAGE REFERENCE
CIN
CE
8 OSCOUT
/VDCC 3
7 OSCIN
4 VSB
5 6 VCC VDD
THERMAL PROTECTION OVER CURRENT PROTECTION VOLTAGE REFERENCE CONTROL BLOCK + 5 VOUT 4 NC
IC471 BH25FB1WG-TR
VIN 1
GND 2
STBY 3
IC472 XC9103D092MR
FB 1
VDD 2 + ERROR AMP VREF WITH SOFT START & CE CE 3 PWM COMPARATOR + BUFFER, DRIVER
5 EXT
PWM/PFM CONTROLLER
4 GND
37
MZ-RH1
IC501 SN761060ZQLR
TON_C AVCC2
44
OFTRK
BOTM
56
55
54
53
52
51
50
49
48
47
46
45
43
NPPO
OFTRK
AVCC
PEAK
JY
JX
IY
PEAK/ BOTM IX 1 PS 2 EQ 3 FE AGND 4 OFC_C1 5 RF OFC_C2 6 VREF10 7 RFO 8 VREF09 9 RF_IX 10 RF_IY 11 RF_JY 12 RF_JX 13 D_C 14 APC TPP/WPP TE AVCC
T-ON AVCC2
42 TE 41 FE 40 ABCD
ABCD
A+B+C+D I+J NPP TON CSL AW+DW TONE PEAK TON BOTM ADIP TE TWP-P PK/BTM AW CSLO VREF09 A-C D-C MALFA MIJ AWBPF DW DWBPF
33 SBUS
AVCC2
AVCC
SERIAL I/F
32 SCK 31 SSEL
SIGNAL MONITOR
POWER SUPPLY
30 NC 29 DVCC
ADIP
15
16
17
18
19
20
21
22
23
24
25
26
27
28
PD_I
PD_NI
PDO_SINK
PDO_SOURCE
PD_BUF
NC
CDN
A-C
SMON
ADFG
38
WPP_LPF
CCSL2
CLK
NC
MZ-RH1
IC601 SC901583VAR2
VBUSSEL2 EFM CLK EFM
84
83 VG
82 81 80
79
78 77
76
75 74 73 72 71 CHARGE PUMP
70 69
68
67
66 65 VG3
64
63 62
61 VIF
60
59 58
57
NC A12 85 56 LATCH EFM BOTTOM PRE DRIVER HOLD OUT 86 RST OUT 87 PVBUS 88 CRST 89 DVDD IN 90 DVDD OUT 91 HOLDC 92 OSC OUT 93 SLEEP IN 94 RST IN 95 PGND2 96 REG IN 97 REG OUT 98 SUS IN 99 PGND2 100 TSBV IN 101 TSBV OUT 102 V33R 103 PGND1 104 VSTB IN 105 VSTB OUT 106 BATSEL 107 V33RO 108 BUS POWER STEP DOWN CONVERTER DRIVER SELFPOWER STEP UP-DOWN CONVERTER DRIVER VPDRV 36 VPDRV 35 RF2 34 DTC2 33 INM2 INM1 110 32 INM3 DTC1 111 VREC VREC 112 VREC STEP UP-DOWN CONVERTER DRIVER VC V3FB 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 VREF BUFFER V3 STEP UP-DOWN CONVERTER DRIVER PWM DAC PWM 31 DTC3 30 RF3 29 NC M1 POWER SWITCH DRIVER CIRCUIT RESET LOGIC 2.0V RESET CONTROL BUFFER PVBUS HOLD LOGIC CONTROL EFM TOP PRE DRIVER VBUS LVDT SYSTEM DAC BANDGAP REFERENCE LVDT WAKE VBUS 55 XWKO 54 VBUS 53 WAKEC 52 V33UO 51 VBUS DET 50 VBUSREF 49 L5 2 48 PGND5 47 PGND5 46 POWFB 45 L5 1 H-BRIDGE DRIVER 44 PGND5 43 VBUSSEL 42 CLM 41 POWP2 40 INP3 39 INP2 38 CLP 37 POWP1
RF1 109
DW 1B DW 1T VRECO 2 VRECO 1 L1 2 L1 1
33USEL
PGND3 PGND3
NC_A1
VREF IN
L3 1 L3 2 DW 3T DW 3B
UP 1T UP 1B
UP 3B
V3C 1 V3C 2
INP1
5 SEL
V3FB
NC M12
PGND2
PGND4
VG3 PGND4
OUTA
RECP
DATA SCK
GND
HAB HBB
CLK
VIF
HA HB
VG
39
MZ-RH1
IC608 XC6213B152NR
VOLTAGE REFERENCE
VSS 2
IC681 SN74LVC541ARGYR
VCC G2 Y2 Y5 Y6 Y3 Y4 Y7
12
20 19
18
Y1
17
16
15
14
13
11
Y8
9 10
A1
IC682 SN74LVC547ARGYR
1 SELECT 11 1A 2 INPUT 1B 3 OUTPUT 1Y 4 2A 5 INPUT 2B 6 OUTPUT 2Y 7 GND 8 2B 2Y 3Y 3A 3B 11 3A INPUT 10 3B 9 3Y OUTPUT 1B 1Y 2A 4A 4B 4Y 14 4A 13 4B INPUT 1A S G 16 VCC 15 STROBE
12 11 4Y OUTPUT
40
GND
A3
A2
A5
A7
A0
A4
A6
A8
MZ-RH1
IC701 BD6608GLV-E2
CPWO2 CPVO2 CPUO2 CPWI2 CPUI2
49
64
63 62
61 60
59 58
57 56
55 54 53
52 51
50
CPVI2 +
COM2
RO2 FO2
RO1 FO1
RI2 FI2
RI1 FI1
NC
PRE DRIVE
PRE DRIVE
48 47 46 45 44 43
DECODER
PRE DRIVE
VMF1 16 17 18 19 20 21
STANDBY
22
23 24
25 26 27 28
29 30 31
STALL
CPUI1
VCC
ST1 ST2
VG
10 11 12 13 14 15
+ 32
DRIVER
33 CPVI1
41
MZ-RH1
IC802 R1180N121C-TR-FA
VDD 1 GND 2 NC 3
REGULATOR
5 VOUT 4 NC
VOLTAGE REFERENCE
VSS 2 CE 3
42
MZ-RH1
IC901 SC901584EPR2
MUTEON L2 L2 PGND2 PGND2 REGO3 REGC3 DW 2B DW 2T XRST2 CRST2 33 RST2 POWER SWITCH 2 RST2 SERIAL PASS REGULATOR 2 MUTING BUFFER PWM 32 DTC2 VREF REF2 RST2 MUTE ON 31 RF2 30 INM2 29 VGSEL1 28 VGSEL2 VB VG SELECT, VG DUTY GND 56 VREF 57 CLK REF1 REF2 REF3 REF4 REF5 REF1 VREF0 VC VREF 20 DTC1 RST1 DATA STRB CLK WDT SEQSEL CLK SLEEP 58 59 60 61 62 63 64 LVB DRIVER PWM CONTROL VREF VC STEP UP-DOWN DRIVER VC VREF RESET 1 REF1 RST1 19 XRST1ADJ 18 CRST1 17 XRST1 VREF0 BANDGAP REFERENCE VC START UP STEP UP DC/DC CONVERTER 27 VB 26 PGND3 25 LG 24 VG 23 C1L 22 INM1 21 RF1 REF DAC SEQSEL STEP UP-DOWN DRIVER VC2 VREF REF2 REGI3 VCO2 VCIN VO2 39 VC2 42
48
47
46
45
44 43
41
40
38 37 36 35
34 RESET 2
SERIAL PASS REGULATOR 3 REGC2 49 REG2G 50 REGO2 51 REGI2 52 REGC1 53 RST1 REGO1 54 REGI1 55 SERIAL PASS REGULATOR 1
VC2
6 VRMC
7 LVB
8 HVB
9 VTSB
10 VC1
11 VCO1
12 VO1
13 14 15 16 L1 L1 PGND1 PGND1
IC982 R1180Q221B-TR-FA
4 VDD CE 1 GND 2 REGULATOR 3 VOUT
43
MZ-RH1
IC PIN FUNCTION DESCRIPITION MAIN BOARD IC801 CXD2687-001GG (SYSTEM CONTROLLER, DSP)
Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46
Pin Name DVDD00 DVSS00 DVDD01 DVSS01 DVDD02 DVSS02 DVDD03 DVSS03 DVDD04 DVDD05 DVSS05 DVDD06 DVSS06 DVDD07 DVSS07 DVDD08 DVSS08 DVSS09 DVDD10 DVSS10 DVDD11 DVSS13 DVSS14 USBDVDD0 USBDVSS FEPLLVDD FEPLLVSS DACVDD DACDVDD25 DACVSS ASYVDD ASYVSS SVADVDD SVADVSS MADVDD MADVSS PLL1VDD PLL1VSS RFADVDD RFADVSS DCVDD DCVSS OSCVDD USBOSCVDD TSMVDD MAIFVDD
I/O Power supply terminal (for internal core) Ground terminal (for internal core) Power supply terminal (for internal core) Ground terminal (for internal core) Power supply terminal (for internal core) Ground terminal (for internal core) Power supply terminal (for internal core) Ground terminal (for internal core) Power supply terminal (for internal core) Power supply terminal (for internal core) Ground terminal (for internal core) Power supply terminal (for internal core) Ground terminal (for internal core) Power supply terminal (for internal core) Ground terminal (for internal core) Power supply terminal (for internal core) Ground terminal (for internal core) Ground terminal (for internal core) Power supply terminal (for internal core) Ground terminal (for internal core) Power supply terminal (for internal core) Ground terminal (for internal core) Ground terminal (for internal core) Power supply terminal (for USB core) Ground terminal (for USB core) Power supply terminal (for PLL) Ground terminal (for PLL) Power supply terminal (for D/A converter) Power supply terminal (for D/A converter) Ground terminal (for D/A converter)
Description
Power supply terminal (for asymmetry correction cell) Ground terminal (for asymmetry correction cell) Power supply terminal (for A/D converter) Ground terminal (for A/D converter) Power supply terminal (for A/D converter) Ground terminal (for A/D converter) Power supply terminal (for PLL) Ground terminal (for PLL) Power supply terminal (for A/D converter) Ground terminal (for A/D converter) Power supply terminal (for D class) Ground terminal (for D class) Power supply terminal (for OSC) Ground terminal (for OSC) Power supply terminal (for the TSB master communication) Power supply terminal (for MA interface)
44
MZ-RH1
Pin No. 47 48 49
I/O O I I I O O O I O I I O I I I I I I Power supply terminal (for USB) Power supply terminal (for USB) Power supply terminal (for USB) Ground terminal (for USB) Power supply terminal (for USB interface) Power supply terminal (for USB) Power supply terminal (for USB)
USBAVDD150 to 50 to 52 USBAVDD152 53 to 58 59 60 61 62 to 64 65 to 68 69, 70 71 to 75 76 to 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 USBAVSS0 to USBAVSS5 USBIFVDD USBDVDD15 USBDVDD151 VSS0 to VSS2 IFVDD0 to IFVDD3 IFVSS0, IFVSS1 DRAMVDD0 to DRAMVDD4 DRAMVSS0 to DRAMVSS2 EBIFVSS0 EBIFVDD1 EBIFVSS1 EBIFVDD3 EBIFVSS3 EBIFVDD4 EBIFVSS4 EBIFVDD5 EBIFVSS5 EBIFVDD6 EBIFVSS6 ASYO ASYI RFI DACVREFH APCREF_DA PCO PCO2 FILI FILO CLTV PLL3EXTCI PLL3EXTCO PEAK BOTM ABCD FE VC ADRB
Power supply terminal (for OSC, USB OSC, TSB master communication, MS interface, MA interface, JTAG and USB interface) Power supply terminal (for interface) Ground terminal (for interface) Power supply terminal (for D-RAM interface) Ground terminal (for D-RAM interface) Ground terminal (for external flash memory bus interface) Power supply terminal (for external flash memory bus interface) Ground terminal (for external flash memory bus interface) Power supply terminal (for external flash memory bus interface) Ground terminal (for external flash memory bus interface) Power supply terminal (for external flash memory bus interface) Ground terminal (for external flash memory bus interface) Power supply terminal (for external flash memory bus interface) Ground terminal (for external flash memory bus interface) Power supply terminal (for external flash memory bus interface) Ground terminal (for external flash memory bus interface) Playback EFM duplex signal output terminal Playback EFM comparator slice level input terminal Playback EFM RF signal input from the RF amplifier Reference voltage input terminal Reference voltage output to the RF amplifier Phase comparison output terminal for the playback EFM system master PLL Phase comparison output terminal for the current type Not used Filter input terminal for the playback EFM system master PLL Filter output terminal for the playback EFM system master PLL Internal VCO control voltage input terminal for the playback EFM system master PLL Connection terminal for an external capacitor Connection terminal for an external capacitor Peak hold signal input of the light amount signal (RF/ABCD) the RF amplifier Bottom hold signal input of the light amount signal (RF/ABCD) the RF amplifier Light amount signal (ABCD) input from the RF amplifier Focus error signal input from the RF amplifier Middle point voltage input from the RF amplifier A/D converter the lower limit voltage input terminal
45
MZ-RH1
Pin No. 108 109 110, 111 112 113 114 115 116 117 118 119, 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152
Pin Name SE TE AUX1, AUX2 ADRT APC ADC1EXTC TEMP_MON VB_MON CHG_MON VREF_MON SET_KEY_1, SET_KEY_2 DCIN_DET HIDC_MON WK_DET VBUS_MON BATT_MINUS_ MON RMC_KEY XHOLD_SW DRAM_HOLD_ DET JOG_A JOG_B OPEN_CLOSE_ SW XREC_KEY XTEST HALF_LOCK_ SW XRST ADC3VREFH ADC3VREFL ADC3EXTC VINP ADFG TRDR TFDR FFDR FRDR FS4 SLVS SPDU SPVS SPDV SPDW SPCU SPCV
I/O I I I I I I I I I I I I I I I I I I I I I I I I I I I O I I O O O O O O O O O O I I
Description Sled error signal input from the RF amplifier Tracking error signal input from the RF amplifier Auxiliary A/D input terminal Not used The upper limit voltage of A/D converter input terminal Error signal input terminal for the laser automatic power control Not used Connection terminal for an external capacitor (for A/D converter) Thermistor connection terminal for temperature detection Monitor input terminal of rechargeable battery power supply voltage (UNREG) Charge or discharge current monitor input from power control IC Reference voltage monitor input from the RF amplifier Set key input terminal (A/D input) Monitor input terminal of DC input voltage for battery charge Not used Monitor input terminal of High DC voltage Detection terminal of panel key input for system wake up Monitor input terminal of USB power supply voltage (VBUS) Monitor input terminal of battery minus terminal Remote commander key input terminal (A/D input) HOLD switch input terminal Detection terminal for internal D-RAM power supply information keeping Jog dial pulse input terminal (A phase) Not used Jog dial pulse input terminal (B phase) Not used Top panel open/close detection switch input terminal REC key input terminal Input terminal for the test mode setting "L": test mode Top panel open switch detection terminal System reset signal input terminal Reference voltage input terminal (High voltage) Reference voltage input terminal (Low voltage) Connection terminal for an external capacitor (for A/D converter) RF signal input from the RF amplifier ADIP duplex FM signal (19.05kHz to 21.05 kHz) input from the RF amplifier Tracking servo drive PWM signal output (-) to the coil driver Tracking servo drive PWM signal output (+) to the coil driver Focus servo drive PWM signal output (+) to the coil driver Focus servo drive PWM signal output (-) to the coil driver 176.4 kHz clock signal output to the over write head driver and power control IC Sled servo drive PWM signal output to the motor driver Spindle motor drive control signal output (U) to the motor driver Spindle servo drive PWM signal output to the motor driver Spindle motor drive control signal output (V) to the motor driver Spindle motor drive control signal output (W) to the motor driver Spindle motor drive comparison signal input (U) from the motor driver Spindle motor drive comparison signal input (V) from the motor driver
46
MZ-RH1
Pin No. 153 154 155 156 157 158 159 160 161 166 167 168 169 170 171 172
Pin Name SPCW SLDV SLDW SLCU SLCV SLCW SLDU FS256OUT CHOPPERCLK OFTRK NC EFMO HI_Z_SLD RST_CONT PROTECT HIMD_ PROTECT RECP IAMP_CAL_ MODE SI0 SO0 SCK0 XGUM_ON BEEP XCS_PWR_IC PD_S0, PD_S1 RECPDLY RF4, RF5 CS_RTC NC D_EN1, D_EN2 USBIC_SLEEP XI_SENSE I_SEL1, I_SEL2 XRST_MTR_ DRV XCE_EFM_CTL EFM_SEL PH2 LED_RED LED_GREEN XRST2_DET CHGI_SEL PH7, PH10 USB_WAKE
I/O I O O I I I O O O O I/O O O O I I O O O I O O I O O O O O O O O O O O O O O I O O
Description Spindle motor drive comparison signal input (W) from the motor driver Sled motor drive control signal output (V) to the motor driver Sled motor drive control signal output (W) to the motor driver Sled motor drive comparison signal input (U) from the motor driver Sled motor drive comparison signal input (V) from the motor driver Sled motor drive comparison signal input (W) from the motor driver Sled motor drive control signal output (U) to the motor driver 11.2896 MHz clock output to the RF amplifier Clock signal output for chopper to the over write head driver Monitor output terminal for DSP Not used EFM encode data output for the recording to the over write head driver Standby signal output for the sled motor to the motor driver Reset signal output to the power control IC Recording protector for normal disc detection switch input terminal Recording protector for Hi-MD disc detection switch input terminal Monitor output terminal for DSP Not used Not used Tracking signal input/output for MD3
173 to 175 MNT4 to MNT6 176 177 178 179 180 181 182 183 184, 185 186 187, 188 189 190, 191 192, 193 194 195 196, 197 198 199 200 201 202 203 204 205 206, 207 208
Laser power selection signal output to the power control IC Current sensing amplifier short switch control signal output terminal Serial data input from the real time clock, EEPROM and power control IC Serial data output to the real time clock, EEPROM and power control IC Serial data transfer clock signal output to the real time clock, EEPROM and power control IC Rechargeable battery insert detection switch input terminal Beep sound control signal output to the headphone amplifier Chip select signal output to the power control IC PD IC mode selection signal output to the optical pick-up block Internal setting selection signal output to the RF amplifier Not used Chip select signal output to the real time clock Not used Headphone/LINE/beep selection signal output to the headphone amplifier USB suspend notice signal output to the power control IC Current limit circuit control signal output terminal when adapter is used Charge current control signal output terminal Reset signal output to the motor driver EFM output selection enable signal output terminal EFM output selection signal output terminal Power supply on/off control signal output terminal for the USB Recording indication LED drive signal output terminal Not used Reset signal input from the power control IC Charge/discharge control signal output for current detection amplifier to the charge control IC Not used System wake up signal output terminal by USB connection H: low current charge "L": charge
47
MZ-RH1
Pin No. 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 to 229 230, 231 232 233, 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259
Pin Name USB_CHARGE XRF_RST CHG_PWM IAMP_CAL XMUTE D_VCONT_ PWM PWM4 XCS_USB_DRV XCS_REC_DRV XCS_REC_USB USB_VDD_SW XCS_NV VBUS_DET SSB_DATA SSB_CLK HI_Z_SPDL LDPEN HNH, HNL, HPH, HPL TEST, TEST2 HSALF JTAG0, JTAG1 XLSRCK USBHOLD2 VBUS_VB_CTL CHG_CTL IAMP_CTL D_ENVREG TAT TAN NAR IDO SAK RTCK SI3 SO3 SCK3 SI4 SO4 SCK4 EL_VDD_CTL XCS_DISPLAY OPT_DET XJACK_DET XMIC_DET DOUT XCS_ADC
I/O O O O O O O O O I I/O O O O O I I I/O O I O O O O I I I I O O I O O I O O O O I I I O O USB charge control signal output terminal Reset signal output to the RF amplifier
Description
Charge current or voltage control signal output to the charge control IC Offset signal output for current detection amplifier to the charge control IC Muting on/off control signal output terminal Voltage control signal output to the headphone amplifier Not used Not used Not used Chip select signal output to the power control IC Not used Chip select signal output to the EEPROM Detection terminal of USB power supply SSB data input/output with the RF amplifier SSB clock output to the RF amplifier Standby signal output for the spindle motor to the motor driver Pulse/DC light-emit selection signal output to the optical pick-up block EFM encode data output for the recording to the over write head driver Input terminal for the test Not used Setting terminal Setting terminal Pulse output for laser strobe recording to the optical pick-up Detection terminal of USB power supply USB power supply control signal output terminal Constant current circuit control signal output to the charge control IC Current sense amplifier control signal output to the charge control IC Internal power supply on/off control signal output to the headphone amplifier Not used Not used Not used Not used Not used Not used Serial data output terminal Not used Serial data output to the A/D converter Serial data transfer clock signal output to the A/D converter Serial data input from the display driver IC Serial data output to the display driver IC Serial data transfer clock signal output to the display driver IC EL power supply on/off control signal output terminal Chip select signal output to the display driver IC Optical digital input plug detection signal input terminal "H": optical in Line input plug detection signal input terminal "L": plug in Microphone input plug detection signal input terminal "L": plug in Not used Chip select signal output to the A/D converter
48
MZ-RH1
Pin No. 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 to 302 303 304 305 306 307 308
Pin Name XPD_ADC PAUSE_KEY XOPT_CTL DRAM_VDD_ CLR XDRAMVDD_ SEL DRAM_ALONE DRAMVDD_ DISCHG PCB XRST_DISPLAY PC2 EX512 FS256 ADDT LRCK XBCK DIN OSCI OSCO FS512 DCLSOUTR DCLSOUTL RMC_DTCK UDP UDM RREF VSENS SUSPEND DTL USBHOLD USBOSCE UOSCI UOSCO FCRAMVDD0 FCRAMVSS0 FCRAMVDD1 FCRAMVSS1 FLASHVDD0 FLASHVSS0 PE0 to PE4 MDVCC_CTL VC3_CTL EL_PWR_CTL EBA1 EBA2 EBA11
Description Power control signal output to the A/D converter Power supply on/off control signal output terminal for the optical input jack Internal D-RAM power supply latch clear signal output for quick mode sleep Power supply control signal output terminal for the FCRAM Power on/off control signal output terminal for internal D-RAM Power supply discharge control signal output terminal for internal D-RAM Not used Reset signal output to the display driver IC Not used Not used Master clock signal (256Fs=11.2896 MHz) output to A/D converter Data input from A/D converter L/R sampling clock signal (44.1kHz) output to external A/D converter Bit clock (2.8224 MHz) output to the external A/D converter Digital audio signal input terminal Main system clock input terminal (22.5792 MHz) Main system clock output terminal (22.5792 MHz) Clock signal (512Fs=22.5792 MHz) output to the headphone amplifier PWM modulator signal output to the headphone amplifier (R-CH) PWM modulator signal output to the headphone amplifier (L-CH) TSB master data clock input/output or SSB data input/output with the remote commander USB data (+) input/output terminal USB data (-) input/output terminal Connection terminal for an external resistor Connection terminal for an external resistor USB suspend signal output to the power control IC USB pull-up resistor connection control terminal USB power supply separation signal input from the power control IC Not used USB system clock input terminal (48 MHz) (for USB oscillation circuit) USB system clock output terminal (48 MHz) (for USB oscillation circuit) Power supply terminal (FCRAM system) Ground terminal (for FCRAM) Power supply terminal (FCRAM system) Ground terminal (for FCRAM) Power supply terminal (for FLASH) Ground terminal (for FLASH) Not used Power supply control signal output terminal for the optical pick-up block Power supply control signal output terminal Not used Not used Not used Not used EL power supply on/off control signal output terminal
49
MZ-RH1
Pin No. 309 310 311 312 313 314 315 316
Pin Name EBA13 EBA18 EBA22 EBD0 EBD1 EBD3 EBWE2 EBWR1
I/O Not used Not used Not used Not used Not used Not used Not used Not used
Description
50
MZ-RH1
OLED BOARD IC1 S1C88317D04H000 (DISPLAY DRIVER IC) Pin No. 1 to 10 Pin Name COM25/SEG57 to COM16/SEG66 I/O I O O I O I I I I I O I O O I O O O Not used Not used Not used Not used System clock input terminal (4 MHz) System clock output terminal (4 MHz) Constant voltage output terminal for oscillation Power supply terminal (+2.5V) Ground terminal OSC1 clock signal input terminal OSC1 clock signal output terminal Input terminal for the test Fixed at "H" in this set "H": MCU mode, "L": MPU mode Reset signal input from the system controller MCU mode/MPU mode setting terminal Fixed at "H" in this set Not used Not used Not used Chip select signal input from the system controller Not used Not used Serial data transfer clock signal input from the system controller Serial data output to the system controller Serial data input from the system controller Serial data output to the EL display module Address signal output to the EL display module Address signal output terminal Not used Read strobe signal output to the EL display module Write enable signal output to the EL display module Not used Chip enable signal output to the EL display module Not used Not used Not used Not used Description
11 to 26 COM15 to COM0 27 to 31 32 to 36 37 38 39 40 41 42 43 44 45 46 47 48 49 to 54 55 56 57 to 61 62 63 64 65 to 72 73 74 to 91 92 93 94 to 98 99, 100 101 to 106 CE to CA VC5 to VC1 OSC3 OSC4 VD1 VDD VSS OSC1 OSC2 /TEST /RESET MCU//MPU K11//BREQ K10/EVIN K07 to K02 XCS K00 P17 to P13 SCLK SOUT SIN D7 to D0 A0 A1 to A18 RD WR R25 to R27, R30, R31 CE2, CE3 R34 to R37, R50, R51 COM31/SEG51 to COM26/SEG56 -
51
7-1.
3 2
6
cabinet (front) section
6 6
Ref. No. 1 2 3 4
Description PANEL (UPPER) ASSY SCREW (M1.4) CUSHION (CASE UPPER) SPACER (UPPER)
Remark
Ref. No. 5 6 7
Part No.
Description
Remark
3-225-873-09 SCREW (M1.4) 3-225-873-31 SCREW (M1.4) 2-669-062-01 LID, BATTERY CASE
52
MZ-RH1
7-2.
80
OLED board
53 78 73 53
72
65 63 62 64
EL1
70 67 75 53 66 54 76 74 77
61
not supplied
53
60 59
61 58
EL2
68
56
57
79
(AEP)
55
52
53
51
Ref. No. 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66
Part No. 2-669-066-01 2-669-072-01 3-248-370-01 2-669-050-01 3-049-923-01 X-2148-113-1 2-669-064-01 2-669-063-01 X-2148-114-1 1-831-839-11 2-669-049-01 2-669-051-01 2-680-919-01 2-673-582-01 2-669-052-01
Description ORNAMENT (REC) SPRING (REC), TENSION SCREW, SELF TAP BUTTON (T MARK) FOOT
Remark
Part No. 2-680-917-01 2-683-425-01 2-673-583-01 2-024-013-01 2-669-079-01 2-680-918-02 2-696-027-01 2-683-554-01 2-687-382-01 2-687-383-01 2-693-589-01 2-693-588-01 2-696-032-01 2-696-031-01
Description SHEET (REC SW) SPRING (FF/FR), TORSION REINFORCEMENT SPACER (LINE IN) ORNAMENT (FRONT) SHEET (EL PWB) SHEET (ORNAMENT FRONT) WASHER (SPRING) SHEET (ENT) OLED PAPER (T MARK), GROUND SHEET (T MARK) SHEET (FRONT) SHEET, CU (KEY VOL) (AEP) SHEET (ORNAMENT FRONT) (AEP)
Remark
CABINET (FRONT) (SV) ASSY BUTTON (VOL/MENU) SHEET (BLIND) OLED BOARD, COMPLETE (for SERVICE) CABLE, FLEXIBLE FLAT (18 CORE) SHEET (EL), ADHESIVE HOLDER (EL) SHEET (LED BLIND) LIGHT GUIDE PLATE BUTTON (PAUSE/STOP (X, x)
53
MZ-RH1
7-3.
103
105 104
107
Description LOWER PANEL (SV) ASSY (AEP) LOWER PANEL (SV) ASSY (US, CND) KNOB (HOLD) SHEET (BOTTOM PANEL) SPACER (SET CHASSIS)
Remark
Part No.
Description
Remark
2-683-458-01 SHEET, SHIELD (BOTTOM PANEL) 2-681-232-01 FOOT (PANEL) 2-696-924-01 SHEET (ORNAMENT R)
54
MZ-RH1
7-4.
162
mechanism deck section (MT-MZRH1-181)
160
MAIN board section
not supplied
163
Note: When mounting the MAIN board, refer to 3-4. MAIN BOARD (page 7) in SECTION 3 DISASSEMBLY.
Ref. No. 151 152 153 154 155 156 157 158
Description CASE (BATT) SHEET (LOCK SPRING) SPRING (LIMITTER), COMPRESSION SPRING (LOCK), TENSION SCREW (M1.4)
Remark
Part No.
Description
Remark
2-596-991-01 SHEET (MIC), INSULATING A-1169-929-A CHASSIS BLOCK ASSY, SET 2-682-105-01 3-246-996-01 3-237-876-04 2-688-883-01 X-2148-839-1 SPACER (FULCRUM PLATE) SCREW (MD), STEP SCREW (M1.4), TOOTHED LOCK SHEET (O/C) PLATE, SHIELD ASSY (SVX)
2-669-061-01 KNOB (OPEN) 2-669-077-01 SPRING (POP UP R), TORSION 2-669-076-01 SPRING (POP UP L), TORSION
55
MZ-RH1
7-5.
206
201
209
202
MAIN board
208 208
Part No.
Description
Remark
Description SPACER (HP) SHEET (BATTERY) CUSHION (USB) SHEET, COIL SHEET (O/C), (SW)
Remark
X-2148-115-1 MAIN BOARD, COMPLETE (for SERVICE) (US, CND) X-2148-122-1 MAIN BOARD, COMPLETE (for SERVICE) (AEP) 2-669-070-01 TERMINAL, BATTERY 2-024-013-01 SPACER (LINE IN) 2-596-991-01 SHEET (MIC), INSULATING
56
MZ-RH1
7-6.
264 259
258
261 257
not supplied HR601 (over write head)
254
M702
254
M701
M703
Ref. No. 251 252 253 254 255 256 257 258 259 260
Part No. 3-338-645-31 3-244-882-02 3-248-370-01 3-225-996-17 3-244-880-01 3-263-455-01 3-259-972-25 X-2024-862-1 X-2025-181-3 3-263-453-01
Description WASHER (0.8-2.5) GEAR (SA) SCREW, SELF TAP SCREW (M1.4) (EG), PRECISION PAN SPRING, THRUST RETAINER GEAR (SB) CHASSIS (REC) BASE, MOTOR ASSY HOLDER ASSY PLATE, RATCHET
Remark
Part No.
Description
Remark
X-2023-272-1 SERVICE ASSY, LEAD SCREW 3-244-879-01 SPRING, RACK X-2148-128-1 SERVICE ASSY,OP (ABX-U2) (Included in OVER WRITE HEAD (HR601)) 2-674-385-01 SPACER (HOLDER) 8-835-782-12 MOTOR, DC SSM18D/C-NP (SPINDLE) 8-835-778-22 MOTOR, DC SSM21A/C-NP (SLED) 1-477-519-21 MOTOR UNIT, DC (OVER WRITE HEAD UP/DOWN)
57
MZ-RH1
MAIN
NOTE: Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the components used on the set. -XX and -X mean standardized parts, so they may have some difference from the original one. RESISTORS All resistors are in ohms. METAL: Metal-film resistor. METAL OXIDE: Metal oxide-film resistor. F: nonflammable Abbreviation CND: Canadian model
Ref. No.
Part No.
Description
Remark
Ref. No. C309 C310 C311 C313 C314 C315 C316 C317 C352 C353 C354 C355 C356 C357 C358 C359 C360 C361 C362 C363 C364 C366 C368 C369 C401 C402 C405 C406 C407 C408 C410 C412 C413 C415 C441 C442 C451 C452 C456 C457 C460 C471 C472
Part No. 1-125-777-11 1-100-786-91 1-125-777-11 1-100-352-11 1-100-352-11 1-100-352-11 1-125-891-11 1-125-777-11 1-125-777-11 1-117-919-11 1-125-777-11 1-125-777-11 1-100-842-11 1-113-600-11 1-125-777-11 1-113-600-11 1-125-777-11 1-100-842-11 1-100-842-11 1-125-777-11 1-100-442-11 1-117-919-11 1-164-874-11 1-164-874-11 1-165-897-11 1-165-897-11 1-125-777-11 1-125-777-11 1-164-943-11 1-125-777-11 1-125-777-11 1-125-777-11 1-125-777-11 1-125-777-11 1-125-777-11 1-165-176-11 1-125-777-11 1-125-777-11 1-125-777-11 1-125-777-11
Description CERAMIC CHIP TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP TANTALUM CHIP TANTALUM CHIP CERAMIC CHIP TANTALUM CHIP CERAMIC CHIP TANTALUM CHIP TANTALUM CHIP CERAMIC CHIP TANTALUM CHIP TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP TANTALUM CHIP TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 22uF 0.1uF 1uF 1uF 1uF 0.47uF 0.1uF 0.1uF 10uF 0.1uF 0.1uF 47uF 2.2uF 0.1uF 2.2uF 0.1uF 47uF 47uF 0.1uF 10uF 10uF 100PF 100PF 22uF 22uF 0.1uF 0.1uF 0.01uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.047uF 0.1uF 0.1uF 0.1uF 0.1uF 10% 20% 10% 20% 20% 20% 10% 10% 10% 20% 10% 10% 20% 20% 10% 20% 10% 20% 20% 10% 20% 20% 5% 5% 20% 20% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 20% 10% 10%
Remark 10V 6.3V 10V 16V 16V 16V 10V 10V 10V 6.3V 10V 10V 6.3V 6.3V 10V 6.3V 10V 6.3V 6.3V 10V 6.3V 6.3V 50V 50V 10V 10V 10V 10V 16V 10V 10V 10V 10V 10V 10V 16V 10V 10V 10V 10V 10V 10V 6.3V
X-2148-115-1 MAIN BOARD, COMPLETE (for SERVICE) (US, CND) X-2148-122-1 MAIN BOARD, COMPLETE (for SERVICE) (AEP) ********************* 2-024-013-01 2-024-015-01 2-596-991-01 2-631-292-01 2-669-070-01 SPACER (LINE IN) SPACER (HP) SHEET (MIC), INSULATING SHEET, COIL TERMINAL, BATTERY
2-669-535-01 SHEET (BATTERY) 2-683-460-01 CUSHION (USB) 2-689-554-01 SHEET (O/C), (SW) < CAPACITOR > C101 C102 C103 C104 C105 C151 C152 C153 C154 C155 C156 C201 C202 C203 C204 C205 C251 C252 C253 C254 C255 C256 C301 C302 C303 C304 C305 C306 C307 C308 1-125-837-11 1-125-777-11 1-127-715-11 1-112-840-91 1-125-777-11 1-125-837-11 1-100-843-11 1-125-926-11 1-164-874-11 1-164-937-11 1-125-777-11 1-125-837-11 1-125-777-11 1-127-715-11 1-112-840-91 1-125-777-11 1-125-837-11 1-100-843-11 1-125-926-11 1-164-874-11 1-164-937-11 1-125-777-11 1-100-352-11 1-100-352-11 1-100-841-11 1-100-841-11 1-112-834-91 1-117-919-11 1-125-777-11 1-125-837-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP TANTALUM CHIP TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP TANTALUM CHIP TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTALUM CHIP TANTALUM CHIP TANTALUM CHIP TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP 1uF 0.1uF 0.22uF 470uF 0.1uF 1uF 47uF 4.7uF 100PF 0.001uF 0.1uF 1uF 0.1uF 0.22uF 470uF 0.1uF 1uF 47uF 4.7uF 100PF 0.001uF 0.1uF 1uF 1uF 100uF 100uF 47uF 10uF 0.1uF 1uF 10% 10% 10% 20% 10% 10% 20% 20% 5% 10% 10% 10% 10% 10% 20% 10% 10% 20% 20% 5% 10% 10% 20% 20% 20% 20% 20% 20% 10% 10% 6.3V 10V 16V 2.5V 10V 6.3V 4V 6.3V 50V 50V 10V 6.3V 10V 16V 2.5V 10V 6.3V 4V 6.3V 50V 50V 10V 16V 16V 6.3V 6.3V 6.3V 6.3V 10V 6.3V
1-137-934-11 TANTALUM CHIP 47uF 1-125-777-11 CERAMIC CHIP 0.1uF 1-165-884-11 CERAMIC CHIP 2.2uF
58
MZ-RH1
MAIN
Ref. No. C473 C474 C475 C476 C501 C502 C503 C504 C505 C506 C507 C508 C509 C510 C511 C512 C513 C514 C515 C516 C518 C519 C520 C522 C523 C524 C526 C527 C528 C532 C534 C535 C536 C537 C538 C540 C541 C542 C543 C546 C547 C601 C603 C604 C605 C606 C607 C608 C609 C610 C611 C612 C613 C614 C615 C616 C617 Part No. Description 10% 20% 0.5PF 10% 10% 10% 10% 10% 10% 0.5PF 0.5PF 10% 10% 10% 10% 10% 10% 10% 0.5PF 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 20% 10% 20% 10% 10% 20% 10% 20% 10% 20% 10% 10% 20% 20% 20% 10% 10% 10% 10% 10% 10% 10% 10% 20% 10% 20% Remark 6.3V 20V 50V 6.3V 10V 10V 10V 10V 10V 50V 50V 16V 10V 10V 16V 16V 16V 50V 50V 16V 10V 10V 16V 6.3V 6.3V 50V 10V 10V 10V 16V 10V 10V 10V 6.3V 10V 10V 6.3V 50V 6.3V 10V 6.3V 6.3V 16V 6.3V 6.3V 6.3V 10V 10V 10V 10V 16V 10V 6.3V 25V 10V 6.3V 6.3V Ref. No. C618 C621 C627 C629 C631 C633 C634 C635 C639 C642 C646 C647 C649 C650 C652 C653 C681 C682 C684 C685 C686 C687 C690 C691 C702 C705 C706 C708 C710 C712 C713 C714 C715 C716 C717 C801 C806 C808 C810 C812 C814 C816 C819 C821 C823 C826 C829 C830 C832 C833 C834 C835 C836 C837 C838 C839 C840 C841 Part No. 1-164-943-11 1-164-943-11 1-125-777-11 1-125-777-11 1-164-943-11 1-164-941-11 1-100-844-11 1-100-353-11 1-100-353-11 1-125-837-11 1-125-837-11 1-125-837-11 1-125-837-11 1-125-837-11 1-164-943-11 1-164-943-11 1-119-923-11 1-164-943-11 1-119-923-11 1-100-442-11 1-125-777-11 1-125-777-11 1-164-874-11 1-164-874-11 1-125-777-11 1-125-777-11 1-125-777-11 1-107-819-11 1-107-819-11 1-107-819-11 1-107-819-11 1-107-819-11 1-107-819-11 1-125-837-11 1-125-891-11 1-125-777-11 1-117-919-11 1-117-919-11 1-117-919-11 1-117-919-11 1-117-919-11 1-117-919-11 1-165-884-11 1-165-884-11 1-165-884-11 1-165-884-11 1-164-943-11 1-125-891-11 1-125-837-11 1-125-777-11 1-125-777-11 1-164-943-11 1-164-943-11 1-125-777-11 1-164-943-11 Description CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTALUM CHIP TANTALUM CHIP TANTALUM CHIP TANTALUM CHIP TANTALUM CHIP TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 0.01uF 0.1uF 0.1uF 0.01uF 0.0047uF 22uF 4.7uF 4.7uF 1uF 1uF 1uF 1uF 1uF 0.01uF 0.01uF 0.047uF 0.01uF 0.047uF 10uF 0.1uF 0.1uF 100PF 100PF 0.1uF 0.1uF 0.1uF 0.022uF 0.022uF 0.022uF 0.022uF 0.022uF 0.022uF 1uF 0.47uF 0.1uF 10uF 10uF 10uF 10uF 10uF 10uF 2.2uF 2.2uF 2.2uF 2.2uF 0.01uF 0.47uF 1uF 0.1uF 0.1uF 0.01uF 0.01uF 0.1uF 0.01uF 0.1uF 0.1uF 0.1uF 10% 10% 10% 10% 10% 10% 20% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 20% 10% 10% 5% 5% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 20% 20% 20% 20% 20% 20% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% Remark 16V 16V 10V 10V 16V 16V 10V 16V 16V 6.3V 6.3V 6.3V 6.3V 6.3V 16V 16V 10V 16V 10V 6.3V 10V 10V 50V 50V 10V 10V 10V 16V 16V 16V 16V 16V 16V 6.3V 10V 10V 6.3V 6.3V 6.3V 6.3V 6.3V 6.3V 6.3V 6.3V 6.3V 6.3V 16V 10V 6.3V 10V 10V 16V 16V 10V 16V 10V 10V 10V
1-125-837-11 CERAMIC CHIP 1uF 1-104-915-11 TANTALUM CHIP 2.2uF 1-164-850-11 1-125-837-11 1-125-777-11 1-125-777-11 1-125-777-11 1-125-777-11 1-125-777-11 1-164-850-11 1-164-850-11 1-164-941-11 1-125-777-11 1-125-777-11 1-164-943-11 1-164-943-11 1-164-941-11 1-164-937-11 1-164-850-11 1-164-943-11 1-125-777-11 1-125-777-11 1-164-943-11 1-125-837-11 1-125-837-11 1-164-937-11 1-125-777-11 1-119-923-11 1-119-923-11 1-164-941-11 1-125-777-11 1-135-210-11 1-125-777-11 1-125-926-11 1-125-777-11 1-125-777-11 1-125-926-11 1-164-937-11 1-112-014-11 1-125-777-11 1-125-926-11 1-165-884-11 1-164-943-11 1-100-786-91 1-100-786-91 1-100-786-91 1-125-777-11 1-125-777-11 1-125-777-11 1-125-777-11 1-164-943-11 1-125-777-11 1-125-837-11 1-164-227-11 1-104-851-11 1-125-837-11 1-100-842-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTALUM CHIP CERAMIC CHIP TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP TANTALUM CHIP CERAMIC CHIP TANTALUM CHIP CERAMIC CHIP TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP TANTALUM CHIP TANTALUM CHIP TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTALUM CHIP CERAMIC CHIP TANTALUM CHIP 10PF 1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 10PF 10PF 0.0047uF 0.1uF 0.1uF 0.01uF 0.01uF 0.0047uF 0.001uF 10PF 0.01uF 0.1uF 0.1uF 0.01uF 1uF 1uF 0.001uF 0.1uF 0.047uF 0.047uF 0.0047uF 0.1uF 4.7uF 0.1uF 4.7uF 0.1uF 0.1uF 4.7uF 0.001uF 4.7uF 0.1uF 4.7uF 2.2uF 0.01uF 22uF 22uF 22uF 0.1uF 0.1uF 0.1uF 0.1uF 0.01uF 0.1uF 1uF 0.022uF 10uF 1uF 47uF
59
MZ-RH1
MAIN
Ref. No. C842 C843 C846 C847 C848 C849 C850 C851 C852 C853 C854 C865 C866 C867 C868 C891 C892 C901 C902 C905 C908 C909 C911 C912 C913 C917 C920 C921 C928 C930 C931 C933 C942 C943 C944 C947 C949 C950 C954 C955 C956 C961 C962 C982 C983 C984 C985 C988 C3302 C3304 C3306 C3353 C3360 C3361 C4441 C4481 C9001 Part No. Description 0.1uF 0.1uF 0.047uF 8PF 10PF 10PF 10PF 47uF 22PF 0.1uF 1uF 1uF 0.01uF 1uF 1uF 0.1uF 100PF 1uF 10uF 1uF 0.1uF 0.1uF 0.1uF 0.022uF 0.022uF 0.1uF 47uF 22uF 220uF 22uF 0.1uF 0.001uF 0.0047uF 2.2uF 0.01uF 2.2uF 2.2uF 2.2uF 1uF 1uF 1uF 1uF 1uF 1uF 0.01uF 0.1uF 1uF 0.1uF 0.001uF 0.01uF 0.0022uF 0.1uF 0.0022uF 0.0022uF 0.0022uF 0.1uF 0.047uF 10% 10% 10% 0.5PF 0.5PF 0.5PF 0.5PF 20% 5% 10% 10% 10% 10% 10% 10% 10% 5% 20% 20% 20% 10% 10% 10% 10% 10% 10% 20% 20% 20% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% Remark 10V 10V 10V 50V 50V 50V 50V 6.3V 50V 10V 6.3V 6.3V 16V 6.3V 6.3V 10V 50V 16V 16V 16V 10V 10V 10V 25V 25V 10V 6.3V 10V 5V 10V 10V 50V 16V 6.3V 16V 6.3V 6.3V 6.3V 6.3V 6.3V 6.3V 6.3V 6.3V 6.3V 16V 10V 6.3V 10V 50V 16V 50V 10V 50V 50V 50V 10V 16V CN441 CN471 CN501 CN701 1-820-016-11 1-793-670-61 1-818-539-21 1-818-536-21 Ref. No. Part No. Description < CONNECTOR > CONNECTOR, SQUARE TYPE (USB) 7P CONNECTOR, FFC (LIF (NON-ZIF)) 18P CONNECTOR, FPC (ZIF) 26P CONNECTOR, FPC (ZIF) 10P < DIODE > D101 D201 D401 D441 D442 D451 D471 D472 D601 D602 D603 D604 D605 D607 D608 D610 D681 D682 D683 D684 D685 D686 D801 D901 D902 D903 D904 D905 D906 D981 D982 D983 D984 D3301 D3302 D3303 8-719-056-23 8-719-056-23 6-501-199-01 6-500-483-01 8-719-422-49 6-500-813-01 6-501-200-01 6-501-200-01 6-500-912-01 6-500-813-01 6-500-813-01 6-500-813-01 6-500-813-01 6-500-813-01 6-500-813-01 6-501-199-01 6-501-201-01 6-500-909-01 6-500-909-01 6-500-909-01 6-501-201-01 6-500-909-01 6-500-813-01 6-501-200-01 6-501-200-01 6-501-200-01 6-501-200-01 6-501-200-01 6-501-200-01 6-500-813-01 6-500-813-01 8-719-072-27 8-719-072-27 6-500-044-01 6-500-044-01 DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE MA2S111- (K8).SO MA2S111- (K8).SO NSR0320MW2T1G MA22D2800LS0 MA8056-L MA2SD32008S0 HRC0201ATRF-E HRC0201ATRF-E MA2SD3100LS0 MA2SD32008S0 MA2SD32008S0 MA2SD32008S0 MA2SD32008S0 MA2SD32008S0 MA2SD32008S0 NSR0320MW2T1G BAT54XV2T1 MA22D1700LS0 MA22D1700LS0 MA22D1700LS0 BAT54XV2T1 MA22D1700LS0 MA2SD32008S0 HRC0201ATRF-E HRC0201ATRF-E HRC0201ATRF-E HRC0201ATRF-E HRC0201ATRF-E HRC0201ATRF-E MA2SD32008S0 MA2SD32008S0 MA2Z748001S0 MA2Z748001S0 DF6A6.8FU (TE85R) DF6A6.8FU (TE85R) Remark
1-125-777-11 CERAMIC CHIP 1-125-777-11 CERAMIC CHIP 1-119-923-11 1-164-848-11 1-164-850-11 1-164-850-11 1-164-850-11 1-100-842-11 1-164-858-11 1-125-777-11 1-125-837-11 1-125-837-11 1-164-943-11 1-125-837-11 1-125-837-11 1-125-777-11 1-164-874-11 1-100-352-11 1-137-910-11 1-100-352-11 1-125-777-11 1-125-777-11 1-125-777-11 1-164-227-11 1-164-227-11 1-125-777-11 1-100-842-11 1-100-844-11 1-100-609-11 1-165-897-11 1-125-777-11 1-164-937-11 1-164-941-11 1-165-884-11 1-164-943-11 1-165-884-11 1-165-884-11 1-165-884-11 1-125-837-11 1-125-837-11 1-125-837-11 1-125-837-11 1-125-837-11 1-125-837-11 1-164-943-11 1-125-777-11 1-125-837-11 1-125-777-11 1-164-937-11 1-164-943-11 1-164-939-11 1-125-777-11 1-164-939-11 1-164-939-11 1-164-939-11 1-125-777-11 1-165-176-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTALUM CHIP TANTALUM CHIP TANTALUM CHIP TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0 F301
FERRITE, EMI (SMD) (1005) INDUCTOR, EMI FERRITE (1608) EMI FERRITE (SMD) (1005) EMI FERRITE (SMD) (1005) EMI FERRITE (SMD) (1005) EMI FERRITE (SMD) (1005) BEAD, FERRITE (CHIP) (1608) FERRITE, EMI (SMD) INDUCTOR, EMI FERRITE (1608)
60
MZ-RH1
MAIN
Ref. No. Part No. Description Remark Ref. No. L201 L471 L501 L502 L503 L504 L505 L506 L601 1/10W L603 L604 L701 L703 L801 L802 L803 L804 L901 L903 L904 L905 Part No. 1-400-582-21 1-457-201-21 1-400-397-11 1-400-397-11 1-400-397-11 1-400-342-21 1-400-342-21 1-400-397-11 1-400-306-11 1-400-402-21 1-456-722-21 1-456-724-21 1-456-724-21 1-216-296-11 1-216-296-11 1-216-864-11 1-400-343-21 1-457-206-11 1-456-723-21 Description INDUCTOR INDUCTOR INDUCTOR INDUCTOR INDUCTOR INDUCTOR INDUCTOR INDUCTOR INDUCTOR INDUCTOR INDUCTOR FERRITE FERRITE SHORT CHIP SHORT CHIP SHORT CHIP INDUCTOR INDUCTOR INDUCTOR 47uH 22uH 10uH 10uH 10uH 10uH 10uH 10uH 100uH 4.7uH 100uH 22uH 22uH 0 0 0 22uH 220uH 220uH 0 220uH Remark
FB1151 1-414-594-11 INDUCTOR, FERRITE BEAD FB1152 FB2201 FB2251 FB2252 FB3301 1-400-591-22 1-400-180-21 1-414-594-11 1-400-591-22 1-400-180-21 BEAD, FERRITE (CHIP) (1608) INDUCTOR, EMI FERRITE (1608) INDUCTOR, FERRITE BEAD BEAD, FERRITE (CHIP) (1608) INDUCTOR, EMI FERRITE (1608)
FB3302 FB3303 FB3304 FB3305 FB3351 FB3352 FB3353 FB3354 FB4401 FB4402
1-216-864-11 1-216-864-11 1-216-805-11 1-469-179-21 1-400-807-21 1-414-594-11 1-400-591-22 1-400-807-21 1-469-869-21 1-469-869-21
SHORT CHIP 0 SHORT CHIP 0 METAL CHIP 47 INDUCTOR, FERRITE BEAD BEAD, FERRITE (1005)
5%
INDUCTOR, FERRITE BEAD BEAD, FERRITE (CHIP) (1608) BEAD, FERRITE (1005) INDUCTOR (EMI FERRITE) (2012) INDUCTOR (EMI FERRITE) (2012)
FB4442 1-400-180-21 INDUCTOR, EMI FERRITE (1608) < IC > IC301 IC302 IC351 @ IC401 IC451 IC452 IC471 IC472 @ IC501 @ IC601 IC602 IC604 IC605 IC606 IC607 IC608 IC681 IC682 @ IC701 IC801 IC802 IC804 IC891 IC901 IC961 IC981 IC982 6-706-745-01 6-709-231-01 6-702-894-01 6-707-716-01 6-703-012-01 6-703-011-01 6-706-640-01 6-707-762-01 6-708-542-01 6-705-000-01 6-702-590-01 6-706-214-01 6-709-240-01 6-709-241-01 6-709-242-01 6-709-319-01 6-709-180-01 6-709-181-01 6-708-355-01 (Not supplied) 6-709-057-01 6-709-505-01 6-805-607-01 6-704-997-01 6-709-320-01 IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC CXD9847K (TE4) MM3035FULE AK5356VN-L MM1690LCBE R2061K01-E2 TC7SZ126AFE BH25FB1WG-TR XC9103D092MR SN761060ZQLR SC901585VAR2 XC61CN1702NR TC7SL32FU (TE85R) BH12PB1WHFV-TR BH15PB1WHFV-TR BH33PB1WHFV-TR XC6213B152NR SN74LVC541ARGYR SN74LVC157ARGYR BD6608GLV-E2 CXD2687-001GG R1180N121C-TR-FA XC6213B232MR AK6508CU-L SC901584EPR2 XC6213B312MR
Q101 Q201 Q301 Q302 Q351 Q401 Q402 Q404 Q405 Q406 Q441 Q442 Q471 Q472 Q473 Q474 Q475 Q501 Q502 Q503 Q601 Q603 Q604 Q606 Q608 Q609 Q610 Q611 Q612 Q613 Q681 Q682 Q802 Q901 Q902
8-729-050-32 8-729-050-32 6-551-127-01 6-550-818-01 8-729-051-23 6-551-476-01 8-729-421-15 6-551-476-01 6-551-274-01 6-550-192-01 6-550-354-01 6-551-321-01 6-551-154-01 6-551-273-01 6-551-476-01 6-551-274-01 6-551-327-01 8-729-051-23 6-551-325-01 6-551-154-01 6-550-671-01 6-551-325-01 6-551-325-01 6-550-354-01 6-551-476-01 6-551-321-01 6-551-476-01 6-551-321-01 6-550-379-01 6-550-379-01 6-550-357-01 6-550-740-01 6-551-325-01 6-551-321-01 6-551-325-01
TRANSISTOR TRANSISTOR TRANSISTOR FET TRANSISTOR FET TRANSISTOR FET TRANSISTOR TRANSISTOR FET TRANSISTOR TRANSISTOR FET FET TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR FET TRANSISTOR TRANSISTOR FET FET TRANSISTOR FET TRANSISTOR FET FET FET FET TRANSISTOR TRANSISTOR TRANSISTOR
2SC5585TL 2SC5585TL RT1P441U-TP-1 US6K1TR 2SA2018TL MTM232230LS0 2SD1119-Q MTM232230LS0 MUN5314DW1T1G DTC144EET1 RTQ035P02TR RT3WLMM-TP-1F RT2C00M-TP RTR025N03TL MTM232230LS0 MUN5314DW1T1G RT1N144U-TP-1 2SA2018TL 2SC5383-TP-1F RT2C00M-TP NTHC5513T1G 2SC5383-TP-1F 2SC5383-TP-1F RTQ035P02TR MTM232230LS0 RT3WLMM-TP-1F MTM232230LS0 RT3WLMM-TP-1F 2SK354700LS0 2SK354700LS0 CPH5614-TL-E MCH6617-TL-E 2SC5383-TP-1F RT3WLMM-TP-1F 2SC5383-TP-1F
1-816-944-11 JACK (i/LINE OUT) 1-816-946-21 JACK (LINE IN (OPT)) 1-816-945-21 JACK (MIC (PLUG IN POWER)) < COIL/JUMPER RESISTOR >
L101
1-400-582-21 INDUCTOR
47uH
Note: IC801 on the MAIN board can not be exchanged alone. When IC801 on the MAIN board is damaged, exchange the complete MAIN board. @ Replacement of IC401, IC501, IC601 and IC701 on the MAIN board used in this set requires a special tool.
61
MZ-RH1
MAIN
Ref. No. Q981 Q982 Q983 Q984 Part No. 6-551-327-01 6-551-274-01 6-551-274-01 6-551-476-01 Description TRANSISTOR TRANSISTOR TRANSISTOR FET < RESISTOR > R101 R103 R104 R105 R106 1-218-990-11 1-218-957-11 1-218-957-11 1-218-929-11 SHORT CHIP RES-CHIP RES-CHIP RES-CHIP 0 2.2K 2.2K 10 22 RT1N144U-TP-1 MUN5314DW1T1G MUN5314DW1T1G MTM232230LS0 Remark Ref. No. R409 R410 R411 R414 R422 R423 R425 1/16W 1/16W 1/16W (AEP) 1/16W (AEP) R427 R428 R441 R442 R444 R445 R446 R447 R448 R451 R452 R454 R455 R461 R471 R472 R473 R474 R475 R476 R477 R478 R480 R481 R482 R483 R484 R485 R486 R487 R488 R489 R490 R493 R501 R502 R503 R504 R505 R506 R508 R510 R511 R512 R513 R514 R515 R516 R517 R601 Part No. Description 2.2K 2.2K 100K 0 100K 100K 2.2M 220K 2.2K 220K 10K 220 100K 2.2M 1M 470K 0 220K 0 0 0 4.7K 4.7K 4.7K 100 100 100 100K 220K 22 470K 10K 100K 47K 0 220K 100K 1M 100K 47K 1K 1K 2.2K 2.2K 4.7K 0 0 0 10K 47K 10K 47K 100K 100K 22K 100K 22 5% 5% 5% 0.5% 0.5% 5% 0.5% 5% 5% 5% 5% 5% 5% 5% 5% Remark 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W
1-218-957-11 RES-CHIP 1-218-957-11 RES-CHIP 1-218-977-11 1-218-990-11 1-208-935-11 1-208-935-11 1-220-804-11 1-208-943-11 1-218-957-11 1-218-981-11 1-218-965-11 1-218-945-11 1-218-977-11 1-220-804-11 1-218-989-11 1-218-985-11 1-218-990-11 1-218-981-11 1-218-990-11 1-218-990-11 1-218-990-11 1-218-961-11 1-218-961-11 1-218-961-11 1-218-941-11 1-218-941-11 1-218-941-11 1-218-977-11 1-218-981-11 1-216-801-11 1-218-985-11 1-208-911-11 1-208-935-11 1-208-927-11 1-218-990-11 1-218-981-11 1-218-977-11 1-218-989-11 1-218-977-11 1-218-973-11 1-218-953-11 1-218-953-11 1-218-957-11 1-218-957-11 1-218-961-11 1-218-990-11 1-218-990-11 1-218-990-11 1-218-965-11 1-218-973-11 1-218-965-11 1-218-973-11 1-218-977-11 1-218-977-11 1-218-969-11 1-218-977-11 1-218-933-11 RES-CHIP SHORT CHIP METAL CHIP METAL CHIP RES-CHIP METAL CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP RES-CHIP SHORT CHIP SHORT CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP METAL CHIP RES-CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP SHORT CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
5% 5% 5% 5%
1-218-933-11 RES-CHIP
R106 R151 R152 R153 R154 R201 R203 R204 R205 R205 R206 R251 R252 R253 R254 R301 R302 R304 R305 R306 R308 R309 R310 R312 R351 R352 R353 R354 R355 R356 R357 R358 R359 R360 R361 R401 R402 R403 R404 R405 R406 R407 R408
SHORT CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP
0 (US, CND) 22K 0.5% 47K 0.5% 22K 0.5% 10K 0.5% 0 2.2K 2.2K 10
5%
1/16W
5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/10W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W
1-218-990-11 SHORT CHIP 1-218-933-11 RES-CHIP 1-208-715-11 1-208-927-11 1-208-911-11 1-208-715-11 1-218-990-11 1-218-969-11 1-218-990-11 1-218-933-11 1-218-990-11 1-218-953-11 1-218-973-11 1-218-989-11 1-218-990-11 1-218-953-11 1-218-953-11 1-218-929-11 1-218-941-11 1-218-957-11 1-218-957-11 1-218-965-11 1-218-977-11 1-218-953-11 1-218-929-11 1-218-929-11 1-218-989-11 1-245-455-21 1-245-456-21 1-245-454-21 1-218-957-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP RES-CHIP SHORT CHIP RES-CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP METAL CHIP METAL CHIP METAL CHIP RES-CHIP
0 (US, CND) 22 22K 47K 10K 22K 0 22K 0 22 0 1K 47K 1M 0 1K 1K 10 100 2.2K 2.2K 10K 100K 1K 10 10 1M 0.47 1 0.022 2.2K 0 100K 100K 5% 0.5% 0.5% 0.5% 0.5% 1/16W (AEP) 1/16W 1/16W 1/16W 1/16W
5% 5%
1/16W 1/16W
5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 1% 1% 1% 5%
1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/5W 1/5W 1/5W 1/16W
5% 5% 5% 5% 5% 5% 5% 5% 5%
5% 5%
1/16W 1/16W
62
MZ-RH1
MAIN
Ref. No. R602 R603 R604 R605 R606 R608 R610 R612 R613 R614 R615 R616 R617 R622 R623 R624 R626 R627 R629 R630 R631 R634 R635 R637 R639 R640 R641 R642 R643 R644 R645 R646 R647 R648 R649 R650 R651 R652 R653 R654 R656 R657 R658 R681 R682 R701 R702 R703 R704 R705 R706 R707 R708 R709 R802 R803 R804 R805 Part No. 1-218-969-11 1-218-945-11 1-218-985-11 1-218-989-11 1-220-804-11 1-218-965-11 1-218-446-11 1-218-985-11 1-218-985-11 1-218-977-11 1-218-977-11 1-218-985-11 1-218-969-11 1-216-797-11 1-245-456-21 1-218-989-11 1-245-456-21 1-218-953-11 1-218-945-11 1-244-161-11 1-220-804-11 1-218-989-11 1-218-990-11 1-218-989-11 1-218-981-11 1-218-985-11 1-218-985-11 1-218-977-11 1-218-985-11 1-218-981-11 1-218-985-11 1-218-985-11 1-218-977-11 1-218-973-11 1-218-985-11 1-218-990-11 1-218-985-11 1-218-989-11 1-218-990-11 1-218-990-11 1-218-990-11 1-218-990-11 1-218-989-11 1-218-985-11 1-218-985-11 1-218-953-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-957-11 1-218-957-11 1-218-957-11 1-218-990-11 1-218-990-11 1-218-990-11 Description RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP METAL CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP METAL CHIP METAL CHIP RES-CHIP METAL CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP RES-CHIP RES-CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP SHORT CHIP SHORT CHIP 22K 220 470K 1M 2.2M 10K 1 470K 470K 100K 100K 470K 22K 10 1 1M 1 1K 220 2.2 2.2M 1M 0 1M 220K 470K 470K 100K 470K 220K 470K 470K 100K 47K 470K 0 470K 1M 0 0 0 0 1M 470K 470K 1K 10K 10K 10K 2.2K 2.2K 2.2K 0 0 0 0 0 0 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 1% 5% 1% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% Remark 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/10W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/10W 1/5W 1/16W 1/5W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W Ref. No. R806 R807 R808 R809 R810 R811 R812 R813 R816 R817 R818 R819 R820 R821 R822 R826 R830 R831 R833 R837 R842 R843 R847 R848 R849 R850 R853 R854 R857 R858 R863 R865 R866 R867 R870 R871 R872 R873 R874 R875 R876 R877 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W R879 R881 R885 R887 R889 R891 R892 R895 R896 R901 R902 R903 R905 R906 R907 Part No. Description 0 0 0 0 0 0 10K 100K 220K 1K 2.2K 1K 220 2.2M 1M 100K 2.2K 470K 0 10K 0 0 470K 220K 47K 220K 10K 0 0 0 1K 1K 1K 10K 0 470 4.7K 100K 68 0 0 47K 0 2.2K 0 1M 0 0 100K 100K 0 100K 470K 100K 1M 1M 100K Remark
1-216-864-11 SHORT CHIP 1-216-864-11 SHORT CHIP 1-218-990-11 1-218-990-11 1-218-990-11 1-218-990-11 1-218-965-11 1-218-977-11 1-218-981-11 1-218-953-11 1-218-957-11 1-218-953-11 1-218-945-11 1-220-804-11 1-218-989-11 1-208-935-11 1-218-957-11 1-218-985-11 1-218-990-11 1-218-965-11 1-218-990-11 1-218-990-11 1-218-985-11 1-208-943-11 1-208-927-11 1-208-943-11 1-218-965-11 1-218-990-11 1-218-990-11 1-218-990-11 1-218-953-11 1-208-683-11 1-208-683-11 1-208-911-11 1-216-864-11 1-218-949-11 1-218-961-11 1-218-977-11 1-218-939-11 1-218-990-11 1-218-990-11 1-218-973-11 1-218-990-11 1-218-957-11 1-218-990-11 1-218-989-11 1-218-990-11 1-218-990-11 1-218-977-11 1-218-977-11 1-218-990-11 1-218-977-11 1-218-985-11 1-218-977-11 1-218-989-11 1-218-989-11 1-218-977-11 SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP METAL CHIP RES-CHIP RES-CHIP SHORT CHIP RES-CHIP SHORT CHIP SHORT CHIP RES-CHIP METAL CHIP METAL CHIP METAL CHIP RES-CHIP SHORT CHIP SHORT CHIP SHORT CHIP RES-CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP SHORT CHIP RES-CHIP SHORT CHIP RES-CHIP SHORT CHIP RES-CHIP SHORT CHIP SHORT CHIP RES-CHIP RES-CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
5% 5% 5% 5% 5% 5% 5% 5% 5% 0.5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W
5% 5%
1/16W 1/16W
5%
1/16W
5% 5%
1/16W 1/16W
5% 5% 5% 5% 5% 5% 5% 5%
63
MZ-RH1
MAIN
Ref. No. R908 R912 R913 R916 R917 R918 R920 R921 R923 R925 R927 R928 R929 R930 R931 R934 R935 R936 R937 R938 R939 R941 R942 R943 R944 R945 R948 R949 R950 R951 R952 R953 R961 R962 R981 R982 R983 R984 R985 R986 R987 R988 R989 R990 R3301 R3351 R4441 R4442
OLED
Part No. 1-218-965-11 1-218-973-11 1-218-977-11 1-218-969-11 1-218-969-11 1-218-981-11 1-208-911-11 1-218-981-11 1-218-985-11 1-218-985-11 1-218-977-11 1-218-990-11 1-218-985-11 1-218-973-11 1-218-973-11 1-218-973-11 1-218-985-11 1-218-990-11 1-244-161-11 1-244-161-11 1-220-803-81 1-208-935-11 1-218-990-11 1-208-927-11 1-208-927-11 1-208-935-11 1-208-715-11 1-208-943-11 1-208-927-11 1-208-935-11 1-208-715-11 1-208-927-11 1-218-990-11 1-218-989-11 1-218-989-11 1-218-977-11 1-218-965-11 1-218-977-11 1-218-981-11 1-218-973-11 1-218-965-11 1-220-804-11 1-218-981-11 1-218-990-11 1-218-990-11 Description RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP METAL CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP METAL CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP SHORT CHIP 10K 47K 100K 22K 22K 220K 10K 220K 470K 470K 100K 0 470K 47K 47K 47K 470K 0 2.2 2.2 4.7 100K 0 47K 47K 100K 22K 220K 47K 100K 22K 47K 0 1M 1M 100K 10K 100K 220K 47K 10K 2.2M 220K 0 0 100 0 0 5% 5% 5% 5% 5% 5% 0.5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% Remark 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W IC1 C1 C2 C3 C4 C5 C6 C10 C11 C12 C13 C14 C15 1-137-703-91 1-100-352-11 1-125-837-11 1-137-703-91 1-125-777-11 1-125-777-11 1-125-777-11 1-125-837-11 1-100-352-11 1-137-703-91 Ref. No. Part No. Description < THERMISTOR > TH801 1-805-194-21 THERMISTOR, NTC (SMD) < VIBRATOR > X451 1-795-602-11 VIBRATOR, CRYSTAL (32.768kHz) X801 1-813-746-11 VIBRATOR, CRYSTAL (22.5792MHz) X802 1-813-725-11 QUARTZ CRYSTAL UNIT (48MHz) ************************************************************ X-2148-114-1 OLED BOARD, COMPLETE (for service) ********************* 1-831-839-11 2-024-013-01 2-680-917-01 2-680-918-02 2-687-382-01 CABLE, FLEXIBLE FLAT (18 CORE) SPACER (LINE IN) SHEET (REC SW) SHEET (EL PWB) SHEET (ENT) < CAPACITOR > TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTALUM CHIP 1uF 1uF 1uF 1uF 0.1uF 0.1uF 0.1uF 1uF 1uF 1uF 20% 20% 10% 20% 10% 10% 10% 10% 20% 20% 20% 10% 20V 16V 6.3V 20V 10V 10V 10V 6.3V 16V 20V 20V 16V Remark
1-137-703-91 TANTALUM CHIP 1uF 1-164-943-11 CERAMIC CHIP 0.01uF < CONNECTOR >
1-818-600-11 CONNECTOR, FPC (ZIF) 39P 1-818-600-11 CONNECTOR, FPC (ZIF) 39P 1-793-670-61 CONNECTOR, FFC (LIF (NON-ZIF)) 18P < DIODE >
D1 D2
6-501-201-01 DIODE BAT54XV2T1 6-500-604-01 LED CL-270HR-C-TSL (REC) < IC > (Not supplied) IC S1C88317D04H000 < RESISTOR >
1-218-941-11 RES-CHIP 1-216-864-11 SHORT CHIP 1-216-864-11 SHORT CHIP < SWITCH >
5%
1/16W R2 R3 R4 R5 R8 R9 R10 R11 R12 R13 R14 R15 1-218-989-11 1-218-989-11 1-218-981-11 1-218-989-11 1-218-949-11 1-218-953-11 1-218-989-11 1-218-949-11 1-218-953-11 1-218-957-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 1M 1M 220K 1M 470 1K 1M 470 1K 2.2K 4.7K 220K 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W
1-786-545-21 SWITCH, PUSH LEVER (S) (BATTERY INSERT DETECT) 1-786-692-21 SWITCH, PUSH (1 KEY) (PROTECT DETECT) 1-786-448-22 SWITCH, PUSH (1 KEY) (HALF LOCK) 1-786-443-21 SWITCH, DETECTION (OPEN/CLOSE DETECT) 1-786-436-21 SWITCH, SLIDE (HOLD) 1-786-926-11 SWITCH, PUSH (1 KEY) (Hi-MD PROTECT DETECT)
64
Note: IC1 and S8 on the OLED board can not be exchanged alone. When IC1 and S8 on the OLED board are damaged, exchange the complete OLED board.
MZ-RH1
OLED
Ref. No. R16 Part No. Description 1M 5% Remark 1/16W Ref. No. Part No. Description Remark
S1 S2 S3 S4 S5 S6 S7 S8
SWITCH, DETECTION (REC) SWITCH, TACTILE (X) SWITCH, TACTILE (VOL ) SWITCH, TACTILE (VOL +) SWITCH, TACTILE (T MARK)
X-2108-572-2 CD-ROM (APPLICATION) ASSY (Windows: SonicStage/MD Simple Burner, Macintosh: Hi-MD Music Transfe for Mac) 1-479-577-21 ADAPTOR, AC (AC-S508U) (US, CND) 1-479-577-31 ADAPTOR, AC (AC-S508U) (AEP) 1-823-935-61 CORD, AC POWER (for AC ADAPTOR) (AEP) 1-824-910-41 1-829-810-31 1-830-472-12 1-479-595-21 8-912-742-91 CORD, POWER (for AC ADAPTOR) (AEP) CORD, POWER (for AC ADAPTOR) (US, CND) CORD, CONNECTION (USB) (USB CABLE) REMOTE COMMANDER (RM-MC38EL) EARPHONES (MDR-E0931SPB9 SET) (AEP)
1-786-540-21 SWITCH, TACTILE (CANCEL, x) 1-786-540-21 SWITCH, TACTILE (DISPLY/MENU) (Not supplied) LEVER (SLIDE TYPE) SWITCH (N/ENT/FF/FR) < VIBRATOR >
8-912-743-90 EARPHONES (MDR-E808SPB19 SET) (US, CND) 1-756-425-21 BATTERY, STORAGE, LITHIUM (LIP-4WM) (US, CND) 1-756-425-31 BATTERY, STORAGE, LITHIUM (LIP-4WM) (AEP) X-2050-928-1 CASE ASSY, CHARGE 1-400-877-11 FILTER, CLAMP (FERRITE CORE) (ESD-SR-110) (for REMOTE COMMANDER) 1-400-878-11 FILTER, CLAMP (FERRITE CORE) (for USB CABLE)
906 X1 1-795-214-21 VIBRATOR, CERAMIC (4MHz) ************************************************************ MISCELLANEOUS ************** 0 263 EL1 EL2 M701 M702 M703 X-2148-128-1 SERVICE ASSY,OP (ABX-U2) (Included in OVER WRITE HEAD (HR601)) 1-802-022-11 INDICATOR MODULE, ORGANIC EL 1-802-022-11 INDICATOR MODULE, ORGANIC EL 8-835-782-12 MOTOR, DC SSM18D/C-NP (SPINDLE) 8-835-778-22 MOTOR, DC SSM21A/C-NP (SLED) 906 907 908
909
901
1-477-519-21 MOTOR UNIT, DC (OVER WRITE HEAD UP/DOWN) ************************************************************ ACCESSORIES ************ 1-400-877-11 FILTER, CLAMP (FERRITE CORE) (for OPTIONAL STEREO MICROPHONE) 1-500-484-21 CLAMP, SLEEVE FERRITE (for OPTIONAL LINE CABLE) 1-816-206-11 CONNECTOR, LIGHT (OPTICAL CABLE) (AEP) 2-669-084-11 MANUAL, INSTRUCTION (ENGLISH) 2-669-084-21 MANUAL, INSTRUCTION (FRENCH) 2-669-084-31 2-669-084-41 2-669-084-61 2-669-084-71 2-677-198-11 MANUAL, INSTRUCTION (GERMAN) (AEP) MANUAL, INSTRUCTION (SPANISH) MANUAL, INSTRUCTION (DUTCH) (AEP) MANUAL, INSTRUCTION (ITALIAN) (AEP) MANUAL (FOR MAC), INSTRUCTION (Hi-MD Music Transfer for Mac) (ENGLISH)
AC POWER ADAPTOR (100V-240V)
902
AC POWER CORD
(US, CND)
(AEP)
903
USB CABLE
909 904
FERRITE CORE
REMOTE CONTROL
905 EARPHONES
2-677-198-21 MANUAL (FOR MAC), INSTRUCTION (Hi-MD Music Transfer for Mac) (FRENCH) 2-677-198-31 MANUAL (FOR MAC), INSTRUCTION (GERMAN) (Hi-MD Music Transfer for Mac) (AEP) 2-677-198-41 MANUAL (FOR MAC), INSTRUCTION (Hi-MD Music Transfer for Mac) (SPANISH) 2-677-198-61 MANUAL (for MAC), INSTRUCTION (Hi-MD Music Transfer for Mac) (DUTCH) (AEP) 2-677-198-71 MANUAL (for MAC), INSTRUCTION (Hi-MD Music Transfer for Mac) (ITALIAN) (AEP) 3-220-749-01 CASE, CARRYING
907
RECHARGEABLE BATTERY CASE
Note: For the installation position of ferrite core, see POSITION OF FERRITE CORE) (Page 11).
Note: IC1 and S8 on the OLED board can not be exchanged alone. When IC1 and S8 on the OLED board are damaged, exchange the complete OLED board.
65
MZ-RH1
REVISION HISTORY
Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. 1.0 1.1 Date 2006.04 2006.05 New Change of Torque value
(ENG-06003)
Description of Revision