February 2006
Parameter
Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Collector Current Continuous Operating and Storage Junction Temperature Range
Symbol
VCES VCBO VEBO IC TJ, TSTG
Value
-80 -80 -4.0 -500 -55 to +150
Unit
V V V mA C
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Notes: 1. These ratings are based on a maximum junction temperature of 150C. 2. These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. 3. All voltages (V) and currents (A) are negative polarity for PNP transistors.
Thermal Characteristics
TA = 25C unless otherwise noted.
Max Characteristic
Total Device Dissipation, Derate above 25C Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient
Symbol
PD RJC RJA
MPSA56
625 5.0 83.3 200
*MMBTA56
350 2.8 357
**PZTA56
1,000 8.0 125
Units
mW mW/C C/W C/W
*Device mounted on FR-4 PCB 1.6" x 1.6" x 0.06." **Device mounted on FR-4 PCB 36mm x 18mm x 1.5mm; mounting pad for the collector lead min. 6 cm 2.
Packages
MPSA56
C
MMBTA56
C
PZTA56
E C B
E C B
TO-92
E
SOT-23
Mark: 2G
SOT-223
www.fairchildsemi.com
Electrical Characteristics
TA = 25C unless otherwise specied.
Parameter
OFF CHARACTERISTICS Collector-Emitter Breakdown Voltage* Collector-Base Breakdown Voltage Emitter-Base Breakdown Voltage Collector-Cutoff Current Collector-Cutoff Current ON CHARACTERISTICS DC Current Gain Collector-Emitter Saturation Voltage Base-Emitter On Voltage SMALL SIGNAL CHARACTERISTICS Current Gain Bandwidth Product
Symbol
V(BR)CEO V(BR)CBO V(BR)EBO ICEO ICBO hFE VCE(sat) VBE(on) fT
Test Condition
IC = -1.0mA, IB = 0 IC = -100A, IE = 0 IE = -100A, IC = 0 VCE = -60V, IB = 0 VCB = -80V, IE = 0 IC = -10mA, VCE = -1.0V IC = -100mA, VCE = -1.0V IC = -100mA, IB = -10mA IC = -100mA, VCE = -1.0V IC = -100mA, VCE = -1.0V, f = 100MHz
Min.
-80 -80 -4.0
Max.
Units
V V V
A A
V V MHz
*Pulse Test: Pulse Width 300s, Duty Cycle 2.0% Note: All voltages (V) and currents (A) are negative polarity for PNP transistors.
Spice Model
PNP (Is=12.27p Xti=3 Eg=1.11 Vaf=100 Bf=91.63 Ne=1.531 Ise=12.27p Ikf=1.009 Xtb=1.5 Br=1.287 Nc=2 Isc=0 Ikr=0 Rc=.6 Cjc=48.28p Mjc=.5615 Vjc=.75 Fc=.5 Cje=106.7p Mje=.5168 Vje=.75 Tr=496.3n Tf=865.8p Itf=.2 Vtf=2 Xtf=.8 Rb=10)
www.fairchildsemi.com
Typical Characteristics
V CESAT - COLLECTOR EMITTE R VOLTAGE (V)
VCE = -1V
-0.4
25C
100
- 40C
-0.2
- 40C 125C
FE -
0 -1
-1.2
-1
- 40C
-0.8
25C 125C
-0.6
-0.4 -10
-1000
-1000
C ib
-0.1
-0.01
www.fairchildsemi.com
-8
TA = 25C
V CE = -5V
300 250 200 150 100 50 0 -1 -10 -100
-6
I=
-4
-1mA
-10mA
-100mA
-2
0 -3000
-5000
-10000
-20000
-30000 -50000
0.75
SOT-223 TO-92
0.5
SOT-23
0.25
25
125
150
www.fairchildsemi.com
CBVK741B019
QTY:
HTB:B 10000
NSID:
PN2222N
SPEC:
D/C1:
D9842
B2
FSCINT Label
(FSCINT)
5 Reels per Intermediate Box F63TNR Label Customized Label 375mm x 267mm x 375mm Intermediate Box
Customized Label
(F63TNR)3
Unit weight = 0.22 gm Reel weight with components = 1.04 kg Ammo weight with components = 1.02 kg Max quantity per intermediate box = 10,000 units
FSCINT Label 327mm x 158mm x 135mm Immediate Box Customized Label 5 Ammo boxes per Intermediate Box F63TNR Label 333mm x 231mm x 183mm Intermediate Box
Customized Label
BULK OPTION
See Bulk Packing Information table Anti-static Bubble Sheets
FSCINT Label
L34Z
NO LEADCLIP
2.0 K / BOX
5 EO70 boxes per intermediate Box 530mm x 130mm x 83mm Intermediate box Customized Label
FSCINT Label 10,000 units maximum per intermediate box for std option
www.fairchildsemi.com
FIRST WIRE OFF IS EMITTER (ON PKG. 92) ADHESIVE TAPE IS ON BOTTOM SIDE FLAT OF TRANSISTOR IS ON BOTTOM
FIRST WIRE OFF IS COLLECTOR (ON PKG. 92) ADHESIVE TAPE IS ON BOTTOM SIDE FLAT OF TRANSISTOR IS ON TOP
www.fairchildsemi.com
Hd P Pd
b Ha H1 HO d L L1 W1 S WO W2 W t
t1 P1 F1 P2 DO ITEM DESCRIPTION PO Base of Package to Lead Bend Component Height Lead Clinch Height Component Base Height Component Alignment ( side/side ) Component Alignment ( front/back ) Component Pitch Feed Hole Pitch Hole Center to First Lead Hole Center to Component Center Lead Spread Lead Thickness Cut Lead Length Taped Lead Length Taped Lead Thickness Carrier Tape Thickness SYMBOL b Ha HO H1 Pd Hd P PO P1 P2 F1/F2 d L L1 t t1 W WO W1 W2 DO S DIMENSION 0.098 (max) 0.928 (+/- 0.025) 0.630 (+/- 0.020) 0.748 (+/- 0.020) 0.040 (max) 0.031 (max) 0.500 (+/- 0.020) 0.500 (+/- 0.008) 0.150 (+0.009, -0.010) 0.247 (+/- 0.007) 0.104 (+/- 0 .010) 0.018 (+0.002, -0.003) 0.429 (max) 0.209 (+0.051, -0.052) 0.032 (+/- 0.006) 0.021 (+/- 0.006) 0.708 (+0.020, -0.019) 0.236 (+/- 0.012) 0.035 (max) 0.360 (+/- 0.025) 0.157 (+0.008, -0.007) 0.004 (max)
Carrier Tape Width Hold - down Tape Width Hold - down Tape position Feed Hole Position Sprocket Hole Diameter Lead Spring Out
D4
D2
Reel Diameter Arbor Hole Diameter (Standard) (Small Hole) Core Diameter Hub Recess Inner Diameter Hub Recess Depth Flange to Flange Inner Width W1 Hub to Hub Center Width W3 Note: All dimensions are inches
D1 D2 D2 D3 D4 W1 W2 W3
W2
D3
www.fairchildsemi.com
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in: inches [millimeters]
www.fairchildsemi.com
3P
SOT-23 Packaging Information Packaging Option Packaging type Qty per Reel/Tube/Bag Reel Size Box Dimension (mm) Max qty per Box Weight per unit (gm) Weight per Reel (kg) Note/Comments Standard (no flow code ) TNR 3,000 7" Dia 187x107x183 24,000 0.0082 0.1175 D87Z TNR 10,000 13" 343x343x64 30,000 0.0082 0.4006
3P
3P
3P
Components
www.fairchildsemi.com
F E2 B0 Wc
Tc K0
P1
A0
B0
2.77 +/-0.10
W
8.0 +/-0.3
D0
1.55 +/-0.05
D1
1.125 +/-0.125
E1
1.75 +/-0.10
E2
6.25 min
F
3.50 +/-0.05
P1
4.0 +/-0.1
P0
4.0 +/-0.1
K0
1.30 +/-0.10
T
0.228 +/-0.013
Wc
5.2 +/-0.3
Tc
0.06 +/-0.02
Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C).
20 deg maximum Typical component cavity center line
0.5mm maximum
0.5mm maximum
Component Rotation
Component Rotation
W1 Measured at Hub
Dim A Max
Dim A max
Dim N
See detail AA
Dim D min
Reel Option
7" Dia
Dim A
7.00 177.8 13.00 330
Dim B
0.059 1.5 0.059 1.5
Dim C
512 +0.020/-0.008 13 +0.5/-0.2 512 +0.020/-0.008 13 +0.5/-0.2
Dim D
0.795 20.2 0.795 20.2
Dim N
2.165 55 4.00 100
Dim W1
0.331 +0.059/-0.000 8.4 +1.5/0 0.331 +0.059/-0.000 8.4 +1.5/0
Dim W2
0.567 14.4 0.567 14.4
Dim W3 (LSL-USL)
0.311 0.429 7.9 10.9 0.311 0.429 7.9 10.9
8mm
13" Dia
www.fairchildsemi.com
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in: inches [millimeters]
www.fairchildsemi.com
F852 014
SOT-223 Packaging Information Packaging Option Packaging type Qty per Reel/Tube/Bag Reel Size Box Dimension (mm) Max qty per Box Weight per unit (gm) Weight per Reel (kg) Note/Comments Standard (no flow code) TNR 2,500 13" Dia 343x64x343 5,000 0.1246 0.7250 D84Z TNR 500 7" Dia 184x187x47 1,000 0.1246 0.1532
F852 014
F852 014
F852 014
F63TNR Label
F63TNR Label 184mm x 184mm x 47mm Pizza Box for D84Z Option
QTY1: QTY2:
(F63TNR)3
Components
www.fairchildsemi.com
P0
D0
F K0 Wc B0 E2 W
Tc A0 P1 D1
B0
7.42 +/-0.10
W
12.0 +/-0.3
D0
1.55 +/-0.05
D1
1.50 +/-0.10
E1
1.75 +/-0.10
E2
10.25 min
F
5.50 +/-0.05
P1
8.0 +/-0.1
P0
4.0 +/-0.1
K0
1.88 +/-0.10
T
0.292 +/0.0130
Wc
9.5 +/-0.025
Tc
0.06 +/-0.02
Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C).
20 deg maximum Typical component cavity center line
0.5mm maximum
0.5mm maximum
Component Rotation
Component Rotation
W1 Measured at Hub
Dim A Max
Dim A max
Dim N
See detail AA
Dim D min
Reel Option
7" Dia
Dim A
7.00 177.8 13.00 330
Dim B
0.059 1.5 0.059 1.5
Dim C
512 +0.020/-0.008 13 +0.5/-0.2 512 +0.020/-0.008 13 +0.5/-0.2
Dim D
0.795 20.2 0.795 20.2
Dim N
5.906 150 7.00 178
Dim W1
0.488 +0.078/-0.000 12.4 +2/0 0.488 +0.078/-0.000 12.4 +2/0
Dim W2
0.724 18.4 0.724 18.4
Dim W3 (LSL-USL)
0.469 0.606 11.9 15.4 0.469 0.606 11.9 15.4
12mm
13" Dia
www.fairchildsemi.com
1:1
Scale 1:1 on letter size paper
www.fairchildsemi.com
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.
ACEx FAST ActiveArray FASTr Bottomless FPS Build it Now FRFET CoolFET GlobalOptoisolator CROSSVOLT GTO DOME HiSeC EcoSPARK I2C 2 E CMOS i-Lo EnSigna ImpliedDisconnect FACT IntelliMAX FACT Quiet Series Across the board. Around the world. The Power Franchise Programmable Active Droop
DISCLAIMER
ISOPLANAR LittleFET MICROCOUPLER MicroFET MicroPak MICROWIRE MSX MSXPro OCX OCXPro OPTOLOGIC OPTOPLANAR PACMAN POP Power247 PowerEdge
PowerSaver PowerTrench QFET QS QT Optoelectronics Quiet Series RapidConfigure RapidConnect SerDes ScalarPump SILENT SWITCHER SMART START SPM Stealth SuperFET SuperSOT-3
SuperSOT-6 SuperSOT-8 SyncFET TCM TinyLogic TINYOPTO TruTranslation UHC UltraFET UniFET VCX Wire
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component is any component of a life 1. Life support devices or systems are devices or support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.
Rev. I18
www.fairchildsemi.com