DS S12F-G1433 Ready
ENT
Long-press (HOLD) the ENT key to enter the menu. Use to scroll.
HOLD
DS S12F-G1433 Ready
1.
At the top right corner, the P sign shows Primary controller. Press and hold the Up and Down keys together for one second. The sign changes to S, showing Secondary controller.
2.
3.
ESC
ENT
System Functions
Long press the ENT key. View and Edit Event Logs
-1-
Parameters
Optional menu
Dotted line indicate optional menus that will appear only under certain conditions.
Character entry
Some menu items require you to enter numbers or characters. Scroll down to select the character and press ENT to select. HOLD the ENT key to finish the entry. * Available characters vary.
8 : d v N
9 ; e w O
. < f x P
! = g y Q
> h z R
# ? i A S
$ @ j B T
% [ k C U
& ] l D V
^ m E X
Password input
If you have set the password, changing settings might require entering the password.
Input Password _
HOLD
Confirm
Critical message
When a critical event occurs, a notice will appear onscreen. Scroll down the list to read the whole message and HOLD the ENT key to clear the message.
to scroll 2010/11/22 16:03 Critical Generalized Target Event Peripheral Set 0 Device ALERT PSU1 Failure Detected
ENT
HOLD
Clear
Power-up sequence
Shown to the right is the sequence of menus that appear on power-up or system reset.
DS S12F-G1433 Ready
-2-
ENT
View Drives
ENT
Slot=4 238214MB LG0 LN HDT722525 LDs that are not part of an LV Delete LG HOLD ID=1DB25FA6 ?
ENT
ENT
HOLD
HOLD
Confirm
Initialization, addition, migration Initialize ENT Progress RAID Level > 3 Migrate Logical Drive
Init Online 12% LDs that are not part of an LV Migrate Logical HOLD Drive ? Slot A Slot B Assign LG To Slot B ?
ENT
ENT
HOLD
ENT
ENT
HOLD
Confirm
ENT
HOLD
Confirm
ENT
HOLD
Confirm
ENT
ENT
ENT
First member Slot=1 238214MB *LG=0 SL_JDT7225 Last member Slot=* 238214MB *LG=0 SL_JDT7225
-3-
HOLD
HOLD
ENT
Confirm
ENT
HOLD
ENT
ENT
ENT
ENT
ENT
Media Scan
ENT
Priority Normal
ENT
ENT
HOLD HOLD
Confirm
ENT
Confirm
HOLD
Confirm
ENT
HOLD
Confirm
ENT
Restart LD?
HOLD
Confirm to select
to select
ENT
ENT
View Drives
ENT
ENT
Undelete LG ID=22017771
HOLD
Confirm
-4-
to select
HOLD
First member
ENT
ENT
ENT
Slot=1 238214MB *LG=0 SL_JDT7225 Last member Slot=* 238214MB *LG=0 SL_JDT7225
HOLD
ENT
ENT
HOLD
Confirm
ENT
ENT
ENT
HOLD
Confirm
ENT
HOLD
Confirm
HOLD
Undelete LG ID=1DB25FA6
HOLD
Confirm
-5-
LV=0 24GB GOOD 5A8C0CC43C1DBIF6 Undefined logical volumes LV=0 Not Defined ?
ENT
ENT
to select LG0 RAID5 DRV=4 25500MB GD SB=0 Unmapped logical volume Delete Logical Volume ?
ENT
HOLD
Delete In Progress
ENT
HOLD
Confirm
ENT
HOLD
Confirm
ENT
HOLD
Confirm
ENT
HOLD
Confirm
Add Partition
ENT
When free space is available Add Partition ENT ? to select, ENT to enter
Partition Size12076
ENT
HOLD
Confirm
ENT
HOLD
Confirm
ENT
HOLD
Confirm
ENT
HOLD
Confirm
ENT
Delete In Progress
-6-
Existing logical volumes LV=0 24GB GOOD 5A8C0CC43C1DBIF6 Undefined logical volumes LV=0 HOLD Not Defined ? to select LG=A0 R5 DRV=3 1862GB GD S=0 First member *G=A0 R5 DRV=3 1862GB GD S=0 Last member
ENT
ENT
HOLD
ENT
ENT
HOLD
Confirm
ENT
HOLD
Confirm
HOLD
Confirm
Name: _
HOLD
Confirm
HOLD
HOLD
Create in progress
-7-
Host LUN
ENT
CHL=0 Slot A
to select ID=112
ENT
ENT
HOLD
Confirm to select
ENT
ENT
ENT
ENT
HOLD
210000113329337AE Name
ENT
ENT
HOLD
Confirm
ENT
HOLD
Confirm
HOLD
Confirm
NameNot Set
ENT
Ent Name _
HOLD
Confirm
HOLD
Confirm
-8-
ENT
ENT
Identify Drive
ENT
ENT
Dsk Rev. Space: 256 MB Spare drive available Replace After Clone ? Spare drive available Perpetual Clone ?
ENT
ENT
HOLD
Perpetual Clone
ENT
HOLD
-9-
ENT
ENT
ENT
HOLD
Identify Drive
ENT
ENT
ENT
HOLD
Media Scan
ENT
Priority Normal
ENT
Task Schedule List Scan in progress Abort Media Scan Scan in progress View Media Scan Progress
HOLD
Confirm
to scroll
ENT
HOLD
ENT
ENT
HOLD
- 10 -
ENT
HOLD
Confirm
ENT HOLD
ENT
Exec on Init: NO
ENT
HOLD
Delete Schedule
ENT
HOLD
Confirm
HOLD
ENT
HOLD
Confirm
to select, ENT to enter Start date NOT SET to select Execution Period NOT SET
ENT ENT
[MMDDhhmmYYYY] _
HOLD
Confirm
Priority: Normal
ENT
HOLD
Confirm
Priority Normal
ENT
HOLD
Confirm
HOLD
- 11 -
ENT
HOLD
Confirm
ENT
ENT
ENT
HOLD
ENT
HOLD
ENT
HOLD
Identify Drive
ENT
ENT
ENT
HOLD
- 12 -
ENT
ENT
ENT
HOLD
ENT
HOLD
ENT
HOLD
Identify Drive
ENT
ENT
ENT
HOLD
Drives Utilities
ENT
ENT
ENT
ENT
Confirm
- 13 -
Channel
View and Edit Channels
ENT
ENT
HOLD
( Optional ) Delete Channel SCSI ID Drive channels CH2=Drv SXF=3.0G RCC channels 5(D)=RCC SXF-3.0G to select View Device Port Name Lists(WWPN)
ENT ENT
to scroll NOTICE: Change made to this setting will NOT take effect until the controller is RESET. Prior to resetting the controller, operation may not proceed normally.
WWPN 2100001B329337AE
HOLD
HOLD
WWPN(Name) 2100001B329337AE
to scroll
ENT
Set CHL-0 Data Rate to= 4.0G? ----------------4.0G 3.0G 2.0G 1.5G 1.0G Auto
NOTICE: Change made to this setting will NOT take effect until the controller is RESET. Prior to resetting the controller, operation may not proceed normally.
ENT
Confirm
- 14 -
ENT
Communication Parameters
ENT
ENT
Com1 Configuration
ENT
Baud-rate 38400
ENT
HOLD
Confirm
ENT
LAN IP Configuration
ENT
L0[LAN] MA D0:23:08:8A:D4
ENT
L0[LAN] IP 192.168.4.149
ENT
View Statistics
ENT
ENT
IP Addr: 192.168.4.149
ENT
Host-side Parameters
NetMask: 255.255.0.0
Confirm
Collisions: 00000000
Set Cache Flush Time-Disabled? ----------------Disabled ConSync 30 secs 60 secs 120 secs 300 secs 600 secs
HOLD
Prefix
ENT
Confirm
Route
ENT
Route: _
HOLD
Confirm
(In dual-controller models, all IP Address menus are divided into Slot A and Slot B.)
- 15 -
Host-side Parameters
ENT
ENT
Drive-Side Parameters
ENT
HOLD
Confirm
ENT
ENT
to select Set Tag per Host Connect-4 ? ----------------1 (Continues) 256 Device TypeEnclosure
HOLD
Confirm
Confirm
ENT
ENT
Sector Ranges Variable LUN ApplicationFirst Undef LUN Head Ranges Variable
ENT
Set Device Type? Enclosure ----------------No Device(0x7f) Direct-access(0) Sequential(1) Processor(3) CD-ROM(5) Scanner(6) MO Device(7) Storage Array(c) Enclosure Dev(d) Unknown(0x1f)
HOLD
Confirm Not Connected Connected Dev Qualifier? Support Not Conn Disabled Enable Enable ? Support Removable
HOLD HOLD
Confirm
Confirm
Undefine LUN-0s First Undef LUN Applies to ? HOLD Confirm Undefine LUN-0s to select Cyl/Head/Sec Values ----------------Variable 1 2 (continues) 35 36
Cylinder Ranges Variable to select Fibre ConOptionLoop Only Fibre host models
ENT
ENT
Set/Change Cyl/Head/Sec
HOLD
HOLD
Confirm
HOLD
Confirm
- 16 -
ENT
HOLD
Confirm
ENT
ENT
Set Disk Delay Time-No Delay? ----------------No Delay 5 secs 10 secs (continues) 70 secs 75 secs
HOLD
Confirm
to select Set SCSI IO Time ----------------7 secs sec 1 sec (continues) 30 secs
HOLD
Confirm
ENT
HOLD
Confirm
ENT
SMART ModeDisable
ENT
HOLD
Confirm to select Set SMART Mode ----------------Disable Detect Perpetual Clone Clone+Replace Fail Drive
HOLD
HOLD
Confirm
Confirm
HOLD
Confirm
ENT
HOLD
to scroll NOTICE: Change made to this setting will NOT take effect until the controller is RESET. Prior to resetting the controller operator may not proceed normally.
HOLD
Confirm
- 17 -
ENT
Verification on Writes
ENT
HOLD
Confirm to select Passwd Validation ----------------Disable 1 min 2 mins 5 mins Always Logical drive available
HOLD
Confirm to select Set Max Drv Rsp Timeout-Disable ? ----------------Disable 160 ms 320 ms 960 ms
HOLD
ENT
Confirm
to select AV Opt ModeDisabled Redundant controller models Redundant Ctlr ENT Configuration
ENT
HOLD
Confirm
RC Communication Channel-SATA Enabled Disabled Disable Cache Sync on WtThru ? Enabled Disabled Enable Adaptive Write Policy ?
ENT
HOLD
Confirm
ENT
HOLD
Confirm
ENT
Enter Ctlr Name: _ Name Logo LCD Title DispIn Name ? to select
Confirm
ENT
HOLD
Confirm
ENT
ENT
HOLD
HOLD
ENT
Time Zone
ENT
HOLD
Confirm
- 18 -
ENT
MMDDhhmmYYYY _
HOLD
Confirm
ENT
Redundant controller models Redundant Ctlr Failback Complet to select I2C Periph Dev Operational
ENT
Device Set 0
ENT
Power Supply
ENT
Cooling Fan
ENT
Cooling Low
fan0
ENT
HOLD
Confirm
Temperature Sensor
ENT
HOLD
Confirm
Voltage Sensor
ENT
ENT
Ctlr FailureDisabled
ENT
Enabled Disabled Ctlr Failure Enabled ? Enabled Disabled CBS Low/Failed Enabled? Enabled Disabled
ENT
ENT
ENT
IFT DS S12F-G1433
ENT
Power Supply Failed- Enabled? Enabled Disabled Fan Failed Enabled? to select
Fan FailedDisabled
ENT
ENT
Temp Over Limit ----------------Disabled Enabled Down in 2 min (Continues) Down in 1 hour
HOLD
Confirm
- 19 -
ENT
ENT
Voltage Monitor
ENT
Temperature Monitor
ENT
ENT
to select Trigger Threshold for ----------------3.3V Event 5V Event 12V Event CPU Temp Event Ctlr Temp Event
ENT
ENT
to select, ENT to enter Range 3.4V-3.9V Input:_ to select, ENT to enter Range 2.6V-3.2V Input:_ to select, ENT to enter
HOLD
Confirm
Lower for 3.3V Event-Def (2.9V) Temperature Upper CPU Temp Event-Def (90C)
ENT
HOLD
Confirm
ENT
ENT
HOLD
Confirm
ENT
HOLD
Confirm
- 20 -
System Function
System Functions
ENT
Mute Beeper
ENT
HOLD
Change Password
ENT
Old Password: _
HOLD
News Password: _
Re-Ent Password: _
HOLD
ENT
HOLD
Confirm
ENT
HOLD
ShutdownControll Is Busy !
HOLD
Confirm
Controller Maintenance
ENT
Logical drive available Export NVRAM to reserved space Logical drive available Impor NVRAM from reserved space
HOLD
HOLD
Export NVRAM is completed to scroll NOTICE: Change made to this setting will NOT take effect until the controller is RESET. Prior to resetting the controller operator may not proceed normally.
ENT
HOLD
ENT
HOLD
- 21 -
ENT
CBM: Present
Boot record Version: 1.15A Single controller model Serial Number: 7927165 Redundant controller model SN-Slot A: 7758538 Redundant controller model SN-Slot B: 7758536
9C
ID of NVRAM V1.13.154
ENT
HOLD
Confirm
HOLD
ENT
- 22 -