Kit Overview The Stellaris LM3S2965 CAN Evaluation Kit provides a compact and versatile evaluation platform for CAN enabled Stellaris ARM Cortex-M3-based microcontrollers. Each board has an InCircuit Debug Interface (ICDI) that provides hardware debugging functionality not only for the on-board Stellaris devices, but also for any Stellaris microcontrollerbased target board. The evaluation kits contain all cables, software, and documentation needed to develop and run applications for Stellaris microcontrollers easily and quickly. The Stellaris LM3S2965 CAN Evaluation Kit is a fully operational CAN Network-in-a-box, with a quickstart sample application that includes a CAN network and CAN traffic, and features:
o o o o o o o o o o o o o o
Simple setup: USB cable provides serial communication, debugging, and power LM3S2965 CAN Evaluation Board, with: 50 MHz Stellaris LM3S2965 ARM Cortex-M3-based microcontroller with integrated CAN 128x64 pixel 16-shade monochromatic OLED display User-programmable push buttons and LED Magnetic speaker Convenient reset push button and power indicator LED Serial in-circuit debug interface over USB Powered over USB with included USB cable Break-out pads for all LM3S2965 I/O LM3S2110 CAN Device Evaluation Board, with: 25 MHz Stellaris LM3S2110 ARM Cortex-M3-based microcontroller with integrated CAN User-programmable push buttons and LED Convenient reset push button and power indicator LED Serial in-circuit debug interface over USB Powered over CAN with included CAN cable Break-out pads for all LM3S2110 I/O
LM3S6965 Evaluation Board Stellaris LM3S6965 microcontroller with fully integrated 10/100 (MAC+PHY) Ethernet controller Simple setup: USB cable provides serial communication, debugging, and power OLED graphics display with 128 x 64 pixel resolution and 16 shades of gray User LED, navigation switches, and select pushbuttons Magnetic speaker All LM3S6965 I/O available on labeled break-out pads Standard ARM 20-pin JTAG debug connector with input and output modes MicroSD card slot Retracting Ethernet cable, USB cable, and JTAG cable Quickstart sample application runs with or without Ethernet (direct connection to your PC), right out of the box, including an embedded web server
o o o o o o
LM3S811 Evaluation Board 50 MHz Stellaris LM3S811 ARM Cortex-M3-based microcontroller 96x16 pixel OLED display User-programmable push button and LED Convenient reset push button and power indicator LED Thumbwheel potentiometer input to the on-chip ADC Serial in-circuit debug interface over USB Stellaris Peripheral Driver Library, which provides a convenient, no-hassle method of initializing, programming, and controlling peripherals on Stellaris microcontrollers Stellaris CD packed with: Evaluation version of the software tools Complete documentation: datasheets, schematics, applications notes, and programming examples Quickstart guide Quickstart application source code StellarisWare Peripheral Driver Library and example source code Port and example application using FreeRTOS.org small footprint real time operating system
LM3S8962 Evaluation Board Stellaris LM3S8962 MCU with fully-integrated 10/100 embedded Ethernet controller OLED graphics display with 128 x 96 pixel resolution User LED, navigation switches, and select pushbuttons Magnetic speaker LM3S8962 I/O available on labeled break-out pads Standard ARM 20-pin JTAG debug connector with input and output modes Standalone CAN device board using Stellaris LM3S2110 microcontroller Ethernet cable, CAN ribbon cable, USB and JTAG cables CD containing evaluation software tools, documentation, quickstart guide, StellarisWare software, and example source code
Features
CC2500 - 2.4 GHz, ISM band multi-channel low power transceiver 2 LEDs and 1 pushbutton Supports development with some 2xx Spy Bi-Wire devices (refer to Table 1-1 in MSP430 Hardware Tools User's Guide for complete compatibility list) Supports MSP430 Application UART allowing serial communication to PC Supports eZ430-T2012 and eZ430-RF2500T target boards Removable USB stick enclosure SimpliciTI, low power network stack Example wireless sensor network project measuring temperature, voltage and signal strength
eZ430-Chronos wireless watch eZ430 USB programming and debugging interface CC1111 USB RF access point Mini Phillips screwdriver CD containing documentation and development software More Information
Features
o o o o
eZ430-F2013 development tool including a USB debugging interface and detachableMSP430F2013 target board eZ430-F2013 target board LED indicator 14 user accessible pins eZ430 debugging and programming interface Supports development with some 2xx Spy Bi-Wire devices (refer to Table 1-1 in MSP430 Hardware Tools User's Guide for complete compatibility list) Supports eZ430-T2012 and eZ430-RF2500T target boards Removable USB stick enclosure Includes IAR Kickstart and Code Composer Studio which include an assembler, linker, source-level debugger and limited C-compiler Full documentation on CD-ROM
Description
The new C2000 Experimenter Kits from Texas Instruments are ideal products for OEMs to use for initial device exploration and testing. The 2808 Experimenter Kit has a docking station with access to all controlCARD signals, breadboard areas and RS-232, JTAG connectors, and features on board USB JTAG emulation. Each kit contains a 2808 controlCARD. The controlCARD is a complete board level module that utilizes and industry-standard DIMM form factor to provide a low-profiles single-board controller solution. . Kit is complete with Code Composer Studio IDE v3.3 C28x Free 32K Byte Version. C2000 applications software with example code and full hardware details also available. No external JTAG emulator is required as the docking station has on board USB JTAG emulation.
Features
TMS320F2808 MCU based controlCARD Docking station with on board USB JTAG emulation Code Composer Studio IDE v3.3, C28x Free 32K Byte Version Applications software and example code also available for download
Features
PAN1323 Bluetooth module with antenna (contains TI CC2560A device) MSP430BT5190 25MHz, 256KB Flash, 16KB RAM, 12 Bit ADC, 4 USCIs, 32-bit HW Multi Pre-flashed eZ430-RF256x SDK with MindTrees Ethermind Bluetooth stack, Serial Port Profile (SPP) and embedded sample applications running on FreeRTOS Interactive sample PC game for demonstration of Bluetooth use in a remote control application VTIs 3 axis accelerometer (CMA3000-D01) with user selectable 2 g and 8 g measurement range and capable of sub-10 uA current consumption at 40 Hz sample rate. Temperature sensors with accuracy as low as +/- 2 degrees Celsius from -40C to +85C. Supports software development with the MSP430BT5190 microcontroller Removable USB stick enclosure 2 LEDs 3 pushbuttons
UART Interface Light Sensor Interface Accelerometer Interface Simple ZigBee applications
o o o o o o o o
ZigBee Packet Error Rate tester Secure ZigBee Communication Basic ZigBee Networks Simple API Full ZigBee API Coordinator/Router/End-device ZigBee Packet Error Rate tester Secure ZigBee Communication
o o o
http://www.digilentinc.com/Products/Detail.cfm?NavPath=2,400,792&Prod=S3EBOARD
Available Quantities = 3