icrochannel reactors hold the promise of improved productivity and cost effectiveness at scales far smaller than what is possible with conventional technology. However, before they are widely accepted many operational issues need to be addressed, including commercial methods for loading and unloading catalyst. This challenge was accepted by Mourik, a worldwide leader in catalyst handling, that worked closely with Velocys Inc. to develop equipment and methods that were used to successfully load a commercial scale microchannel Fischer-Tropsch (FT) reactor. On the surface conventional tubular reactors, such as the 1,200-ton FT reactors in Shells Pearl plant in Qatar, may seem to have little in common with microchannel reactors developed by Velocys, a member of Oxford Catalysts Group. But what the two have in common is that both are essentially fixed bed systems one with thousands of 30-feetlong (10 meters), one-inch tubes and the other
the microchannels at once, then the reactor is vibrated to ensure as much catalyst as possible is packed into each channel. Afterward, relatively standard methods were used to measure catalyst volumes and pressure drops to verify that the reactor is uniformly loaded. At the end of life, a simi-
lar method is used to remove the catalyst. We are very pleased with the equipment and methods developed by Mourik as well as the catalyst loading they achieved, said Dave Kilanowski, senior project leader of Velocys. As is the case with any new procedure, there are still improvements to be
made, but we are confident that we are working with the right partner to figure these out. For more information about Mourik LP, visit www.mourik-usa.com or call (281) 479-4449. For more information about Velocys Inc., visit www.velocys. com or call (614) 733-3300.
Mourik LP specializes in catalyst handling services for industrial applications, utilizing its innovative technology and proven expertise to secure contracts with some of the largest oil companies in the world. Why Mourik? Mourik is an innovative family business that combines traditional human values with modern entrepreneurship, sophisticated technologies, inspiring leadership and a proactive attitude. Catalyst Services Catalyst change-outs Unloading & reloading of tubular reactors Dense loading activities Inspections, repairs & reactor revamps Mechanical work Reactor cleaning Video inspections Hole watch / Fire watch
2230 Pansy Street Pasadena, TX 77503 Phone: 1-281-479-4449 Fax: 1-281-479-4443 E-mail: sales@mourik-usa.com
www.mourik-usa.com
www.mourik.com
March 2012
67