THESIS SUBMITTED IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE DEGREE OF BACHELOR OF TECHNOLOGY IN ELECTRONICS & COMMUNICATION EGINEERING BY
NAME OF STUDENT(s)
ROLL NUMBER: REGISTRATION NUMBER:
NAME OF GUIDE
ASST. PROFESSOR Department of Electronics & Communication Engineering INSTITUTE OF SCIENCE & TECHNOLOGY
Certificate of Submission
I hereby recommend that the thesis, entitled title of project, prepared by name of student/students under my supervision, be accepted in partial fulfillment of the requirement for the degree of Bachelor Institute of of Technology from the Department of Electronics & Communication Engineering under Science & Technology.
----------------------------------------------
(Name of Guide) Asst. Professor, Dept. of Electronics & Communication Engineering, Institute of Science & Technology. Countersigned by:
-----------------------------
------------------------------
Head of the Department Electronics & Communication Engineering, Institute of Science & Technology.
Project Coordinator Electronics & Communication Engineering, Institute of Science & Technology
ACKNOWLEDGEMENT
With great pleasure I would like to express deep gratitude to (Name of guide), Assistant Professor, Department of Electronics & Communication Engineering, Institute of Science & Technology for the help, cooperation and guidance received from him throughout the tenure of this project. His valuable and constructive suggestions at many difficult situations are immensely acknowledged. I am deeply indebted to (Name of guide) for providing a mentally simulating environment and for many hours of enjoyable discussions. My sincere obligation goes to (name of HOD) Head Of The Department, Department of Electronics & Communication Engineering, Institute of Science & Technology for his constant support. My sincere obligation goes to (any other person), (designation), (dept. & institute) for his constant support. My whole hearted thanks to the staffs of the department of Electronics & Communication Engineering, Institute of Science & Technology for their help. Regards
ABSTRACT
(within one page , brief description of project)
CONTENTS
(change the chapter name & topic according your project)
CHAPTER 1: INTRODUCTION
1.1 MOTIVATION OF THE THESIS 1.2 FOCUS OF THE THESIS 1.3 ORGANISATION OF THE THESIS 1 2 3
20
22 25 25 28
34 36
37 40
40
41 44
CHAPTER 7: MICROCONTROLLER BASED HIGH RESOLUTION - ADC FOR DC SIGNAL CONVERSION CHAPTER 8: CONCLUSION, RESEARCH/FURTHER WORK
49
7.1 CONCLUSION
50
APPENDIX A REFERENCES
51 57 60 62