CMOS Image Sensors CMOS Cameras OEM Camera Modules Board Level Cameras
Index
CMOS Image Sensors A1312 Series A1312I Series A1312IE Series A1312C Series A2080 Series OEM Camera Modules Board Level Cameras Camera Selection Chart CMOS Area Scan Cameras MV-D640 Series MV-D752E Series DS1-D1024 Series MV-D1024E Series MV2-D1280-640 DS1-D1312 Series MV1-D1312 Series MV1-D1312C-160 MV1-D1312I Series MV1-D1312IE Series MV1-D2080 Series
4 4 6 8 10 12 14 15 16 18 18 20 22 24 26 28 30 32 34 36 38
Cameras with Image Preprocessing MV1-D1024E-PP01-40 Smart Cameras SM2-D1024-80 SM2-D1312 Series 3D Cameras MV-D1024E-3D01-160 Electroluminescence Cameras EL1-D1312-160 Accessories CameraLink Repeater
40 40 42 42 44 46 46 48 48 50 50
A1312 SeRIeS
1.4 Megapixel monochrome CMOS image sensor
Features
1312 x 1082 pixel resolution 8 m x 8 m square pixel Monochrome Global shutter Over 60% fill factor without microlenses Good NIR response Dynamic range up to 120 dB via LinLog Up to 110 fps @ full resolution Sequential, simultaneous or nondestructive read out Horizontal and vertical windowing Flexible ROI and Multiple ROI Integrated test pattern, temp. sensor and black level reference
50%
Quantum Efficiency
40%
30%
20%
10%
0% 200 300 400 500 600 700 800 900 1000 1100 Wavelength [nm]
A1312-160
CMOS active pixel (APS) Progressive scan Arbitrary row adressing Region of Interest (ROI) X and Y Multiple Region of Interest (MROI) X and Y Multiple nondestructive readouts possible 1 (13.6 mm diagonal) maximum resolution 2/3 (11.6 mm diagonal) 1024 x 1024 resolution 1312 x 1082 pixels (active pixels) 8 m x 8 m 10.48 mm x 8.64 mm (maximum) 1.05 V (typical application) 1.1 mV 13.5 mV 0.65 fA/pixel @ 27C (1) 140 ke (2) < 370 to 1000 nm (to 10 % of peak responsivity) 819 V/J/m (3) > 50 % (3) 4.0 J/m (3) 99.85 % (4) > 60 % (3) 60 dB in linear mode; 120 dB with LinLog Monochrome Linear, LinLog, Skimming Global shutter Sequential or simultaneous read out (read out during exposure) 1 4 (1 or 4 taps active) 40 MHz (5) 27 fps @ max. resolution 110 fps @ max. resolution 37 fps @ 1024 x 1024 resolution 150 fps @ 1024 x 1024 resolution 3.1 V, 3.3 V, 4.6 V < 480 mW during full-speed read out < 600 mW during full-speed read out Industrial (-20C ... +85C) 144-pin CQFP No cover glass
Varies strongly with temperature When configured for 1.1 V output swing Under red illumination (625 nm) Under white LED illumination 60 MHz possible with slightly reduced image quality
All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.
Version 1.1.4
A1312I SeRIeS
near Infrared (nIR) 1.4 Megapixel monochrome CMOS image sensor
Features
1312 x 1082 pixel resolution 8 m x 8 m square pixel Monochrome Global shutter Over 60% fill factor without microlenses Excellent NIR response Dynamic range up to 120 dB via LinLog Up to 110 fps @ full resolution Sequential, simultaneous or nondestructive read out Horizontal and vertical windowing Flexible ROI and Multiple ROI Integrated test pattern, temp. sensor and black level reference
50%
Quantum Efficiency
40%
30%
20%
10%
0% 200 300 400 500 600 700 800 900 1000 1100 Wavelength [nm]
A1312I-160
CMOS active pixel (APS) Progressive scan Arbitrary row adressing Region of Interest (ROI) X and Y Multiple Region of Interest (MROI) X and Y Multiple nondestructive readouts possible 1 (13.6 mm diagonal) maximum resolution 2/3 (11.6 mm diagonal) 1024 x 1024 resolution 1312 x 1082 pixels (active pixels) 8 m x 8 m 10.48 mm x 8.64 mm (maximum) 1.05 V (typical application) 1.1 mV 13.5 mV 0.65 fA/pixel @ 27C (1) 140 ke (2) < 370 to 1100 nm (to 10 % of peak responsivity) 1200 V/J/m (3) > 50 % (3) 3.0 J/m (3) 99.85 % (4) > 60 % (3) 60 dB in linear mode; 120 dB with LinLog (3) Monochrome Linear, LinLog, Skimming Global shutter Sequential or simultaneous read out (read out during exposure) 1 4 (1 or 4 taps active) 40 MHz (5) 27 fps @ max. resolution 110 fps @ max. resolution 37 fps @ 1024 x 1024 resolution 150 fps @ 1024 x 1024 resolution 3.1 V, 3.3 V, 4.6 V < 480 mW during full-speed read out < 600 mW during full-speed read out Industrial (-20C ... +85C) 144-pin CQFP No cover glass
Varies strongly with temperature When configured for 1.1 V output swing Under red illumination (625 nm) Under white LED illumination 60 MHz possible with slightly reduced image quality
All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.
Version 1.1.4
A1312Ie SeRIeS
1.4 Megapixel monochrome CMOS image sensor
Features
1312 x 1082 pixel resolution 8 m x 8 m square pixel Monochrome Global shutter Over 60% fill factor without microlenses Very good NIR response Dynamic range up to 120 dB via LinLog Up to 110 fps @ full resolution Sequential, simultaneous or nondestructive read out Horizontal and vertical windowing Flexible ROI and Multiple ROI Integrated test pattern, temp. sensor and black level reference
50%
Quantum Efficiency
40%
30%
20%
10%
0% 200 300 400 500 600 700 Wavelength [nm] 800 900 1000 1100
A1312IE-160
CMOS active pixel (APS) Progressive scan Arbitrary row adressing Region of Interest (ROI) X and Y Multiple Region of Interest (MROI) X and Y Multiple nondestructive readouts possible 1 (13.6 mm diagonal) maximum resolution 2/3 (11.6 mm diagonal) 1024 x 1024 resolution 1312 x 1082 pixels (active pixels) 8 m x 8 m 10.48 mm x 8.64 mm (maximum) 1.05 V (typical application) 1.1 mV 13.5 mV 0.65 fA/pixel @ 27C (1) 140 ke (2) < 370 to 1050 nm (to 10 % of peak responsivity) 819 V/J/m (3) > 45 % (3) 4.0 J/m (3) 99.85 % (4) > 60 % (3) 60 dB in linear mode; 120 dB with LinLog Monochrome Linear, LinLog, Skimming Global shutter Sequential or simultaneous read out (read out during exposure) 1 4 (1 or 4 taps active) 40 MHz (5) 27 fps @ max. resolution 110 fps @ max. resolution 37 fps @ 1024 x 1024 resolution 150 fps @ 1024 x 1024 resolution 3.1 V, 3.3 V, 4.6 V < 480 mW during full-speed read out < 600 mW during full-speed read out Industrial (-20C ... +85C) 144-pin CQFP No cover glass
Varies strongly with temperature When configured for 1.1 V output swing Under red illumination (780 nm) Under white LED illumination 60 MHz possible with slightly reduced image quality
All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.
Version 1.0.0
A1312C SeRIeS
1.4 Megapixel colour CMOS image sensor
Features
1312 x 1082 pixel resolution 8 m x 8 m square pixel Colour Global shutter Over 60% fill factor without microlenses Integrated NIR cut-off filter(5) Dynamic range up to 60 dB Up to 108 fps @ full resolution Sequential, simultaneous or nondestructive read out Horizontal and vertical windowing Flexible ROI and Multiple ROI Integrated test pattern, temp. sensor and black level reference
10
A1312C-160
CMOS active pixel (APS) Progressive scan Arbitrary row adressing Region of Interest (ROI) X and Y Multiple Region of Interest (MROI) X and Y Multiple nondestructive readouts possible 1 (13.6 mm diagonal) maximum resolution 2/3 (11.6 mm diagonal) 1024 x 1024 resolution 1312 x 1082 pixels (active pixels) 8 m x 8 m 10.48 mm x 8.64 mm (maximum) 1.05 V (typical application) 1.1 mV 13.5 mV 0.65 fA/pixel @ 27C (1) 140 ke (2) 390 to 670 nm (to 10 % of peak responsivity) (5) 745 V/J/m (3) > 40 % (3) 4.4 J/m (3) 99.85 % (4) > 60 % (3) 60 dB in linear mode RGB Bayer (raw) Linear Global shutter Sequential or simultaneous read out (read out during exposure) 1 4 (1 or 4 taps active) 40 MHz (6) 27 fps @ max. resolution 108 fps @ max. resolution 37 fps @ 1024 x 1024 resolution 150 fps @ 1024 x 1024 resolution 3.1 V, 3.3 V, 4.6 V < 480 mW during full-speed read out < 600 mW during full-speed read out Industrial (-20C ... +85C) 144-pin CQFP Integrated NIR cut-off filter(5)
Varies strongly with temperature Maximum, when configured for 1.1V output swing Under red illumination (625 nm) Under white LED illumination A1312C image sensor available without NIR cut-off filter on request 60 MHz possible with slightly reduced image quality
All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.
Version 1.0.2
11
A2080 SeRIeS
4 Megapixel monochrome CMOS image sensor
Features
2080 x 2080 pixel resolution 8 m x 8 m square pixel Monochrome Global shutter Over 60% fill factor without microlenses Good NIR response Dynamic range up to 120 dB via LinLog Up to 140 fps @ full resolution Sequential, simultaneous or nondestructive read out Vertical windowing Flexible ROI and Multiple ROI in Y direction Integrated test pattern, temp. sensor and black level reference
50%
Quantum Efficiency
40%
30%
20%
10%
0% 200 300 400 500 600 700 800 900 1000 1100 Wavelength [nm]
12
A2080-640
CMOS active pixel (APS) Progressive scan Arbitrary row adressing Region of Interest (ROI) in Y Multiple Region of Interest (MROI) in Y Multiple nondestructive readouts possible 23.5 mm diagonal @ max. resolution (< 25 mm image circle) 2080 x 2080 pixels (active pixels) 8 m x 8 m 16.64 mm x 16.64 mm (maximum) 1.05 V (typical application) 1.1 mV 13.5 mV 0.65 fA/pixel @ 27C (1) 140 ke (2) < 370 to 1000 nm (to 10 % of peak responsivity) 819 V/J/m (3) > 50 % (3) 4.0 J/m (3) 99.85 % (4) > 60 % (3) 60 dB in linear mode; 120 dB with LinLog Monochrome Linear, LinLog, Skimming Global shutter Sequential or simultaneous read out (read out during exposure) 4 16 (4 or 16 taps active) 40 MHz (5) 35 fps @ max. resolution 140 fps @ max. resolution 3.1 V, 3.3 V, 4.6 V TBD mW during full-speed read out TBD mW during full-speed read out Industrial (-20C ... +85C) 244-pin CQFP No cover glass
Varies strongly with temperature When configured for 1.1 V output swing Under red illumination (625 nm) Under white LED illumination 60 MHz possible with slightly reduced image quality
All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.
Version 1.0.0
13
For OEM that prefer to design their own camera solution but do not want to spend time on the sensor integration we offer all standard cameras as OEM camera modules. All of the features and technical data are identical to the standard cameras except for the interface board which is not included. Thus making it a perfect solution to interface to your own embedded system. Customized OEM camera modules with different dimensions, components and features are another interesting option for OEMs. This option enables you to further speed up your time to market. Please ask Photonfocus for solutions!
OEM-D1024E-160-LC-12
OEM-D1312-160-LC-12
14
For easier integration into tailored customer applications and especially where space or weight is a limiting factor we offer all our standard cameras as Board Level models. All of the features and technical data are identical to the standard cameras except for the mechanical dimensions. The footprint of these cameras is as small as 46 mm x 46 mm. The depth varies depending on the product type and chosen interface.
BL1-D1312-160-CL-12
BL1-D1024E-40-CL-12
BL1-D1024E-80-CL-12
15
MV-D640(C)-33 MV-D640(C)-66 MV-D752E-40 DS1-D1024-40 DS1-D1024-80 DS1-D1024-160 MV-D1024E-40 MV-D1024E-80 MV-D1024E-160 MV2-D1280-640 DS1-D1312-40 DS1-D1312-80 DS1-D1312-160 MV1-D1312-40 MV1-D1312-80 MV1-D1312-100 MV1-D1312-160 MV1-D1312-240 MV1-D1312IE-40 MV1-D1312IE-160 MV1-D1312I-40 MV1-D1312I-80 MV1-D1312I-100 MV1-D1312I-160 MV1-D2080-160 MV1-D2080-240
MT9V403 MT9V403 A1024B / 2. A1024B / 2. A1024B / 2. A1024B / 2. A1024B / 2. A1024B / 2. A1024B / 2. MT9M413 A1312 / 3. A1312 / 3. A1312 / 3. A1312 / 3. A1312 / 3. A1312 / 3. A1312 / 3. A1312 / 3. A1312IE / 3. A1312IE / 3. A1312I / 3. A1312I / 3. A1312I / 3. A1312I / 3. A2080 / 3. A2080 / 3.
640 x 480 640 x 480 752 x 582 1024 x 1024 1024 x 1024 1024 x 1024 1024 x 1024 1024 x 1024 1024 x 1024 1280 x 1024 1312 x 1082 1312 x 1082 1312 x 1082 1312 x 1082 1312 x 1082 1312 x 1082 1312 x 1082 1248 x 1082 1312 x 1082 1312 x 1082 1312 x 1082 1312 x 1082 1312 x 1082 1312 x 1082 2080 x 2080 2080 x 2080
100 200 87 37 75 150 37 75 150 488 27 55 108 27 55 68 108 170 27 108 27 55 68 108 34 51
60 60 120 60 60 60 120 120 120 59 60 60 60 120 120 120 120 120 120 120 120 120 120 120 120 120
/ / /////////////// /////////-
10 10 12 10 10 10 12 12 12 8 10 10 10 12 12 12 12 8 12 12 12 12 12 12 12 8
300 300 447 447 447 447 447 447 447 251 316 316 316 316 316 316 316 316 316 316 316 316 316 316 316 316
(1)
Computed as square root of full well capacity. Exact figures will be marginally lower.
16
Resolution
MV1-D1024E-PP01-40
A1024B / 2.
1024 x 1024
37
120
/-
/-/-/-
447
Smart Cameras
SM2-D1024-80 SM2-D1312-80 SM2-D1312-JPEG-100 SM2-D1312-160 A1024B / 2. A1312 / 3. A1312 / 3. A1312 / 3. 1024 x 1024 1312 x 1082 1312 x 1082 1312 x 1082 75 55 68 108 120 120 120 120 ////-/-/-/ -/-/-/ -/-/-/ -/-/-/ 12 12 12 12 447 316 316 316 0 + + +
3d Cameras
MV-D1024E-3D01-160 A1024B / 2. 1024 x 1024 150 120 //-/-/12 447 0
electroluminescence Cameras
EL1-D1312-160 A1312 / 3. 1312 x 1082 150 60 //-/-/12 316 +
(1)
Computed as square root of full well capacity. Exact figures will be marginally lower.
Version 1.2.1
Resolution
17
CMOS Camera
MV-d640 SeRIeS
High-Speed VGA
Features
Aptina MT9V403 CMOS image sensor 640 x 480 pixel resolution Dynamic range up to 60 dB Up to 200 fps @ full resolution Global shutter Monochrome and Colour Standard features CameraLink interface 10 bit greyscale resolution
Compatible with
COMPATIBLE WITH
LabVIEW
NATIONAL INSTRUMENTS
30
20
25
15
20
15
10
10
5 0 350
0 350
450
550
650
750
850
950
1050
450
550
650
750
850
950
1050
Wavelength [nm]
Wavelength [nm]
Monochrome
Colour
18
MV-D640-66-CL-10 MV-D640C-66-CL-10
Aptina MT9V403 CMOS active pixel (APS) Progressive scan 1/2 (7.92 mm diagonal) 640 x 480 pixels 9.9 m x 9.9 m 6.34 mm x 4.75 mm ~90 ke < 400 to 1000 nm 480 x 10 DN / (J/m) @ 630 nm / 8 bit / gain = 1 / monochrome (approximately 2600 DN / (lux s) @ 630 nm / 8 bit / gain = 1 / monochrome) 50 % Up to 60 dB Monochrome or Colour (RGB Bayer) Linear Global shutter Sequential read out or simultaneous read out (read out during exposure)
Camera
Exposure time Frame rate Pixel clock Camera taps Greyscale resolution Fixed pattern noise (FPN) Analogue gain Digital gain Configuration interface Trigger modes Features Interface Operating temperature Power supply Power consumption Lens mount Dimensions (H x W x L) Mass Conformity Specials 50 s 1.3 s / 10 s steps 100 fps 33 MHz 1 8 bit / 10 bit < 1.5 DN RMS @ 8 bit / gain = 1 18 CL SERIAL (9600 Baud) Free running (non triggered) External trigger input Region of Interest (ROI) External Clock available CameraLink Base 0C ... +60C +5 V DC (+10% / -5%) 1.5 W C-Mount 55 x 55 x 37 mm 200 g CE / RoHS / WEEE Adjustable backfocus; Opto-isolated I/Os 55 x 55 x 48 mm +5 V DC (+10% / -5%) 3.3 W 200 fps 33 or 66 MHz
Software
Camera control OS PFRemote graphical user interface (GUI) and PFLib (SDK) Windows and Linux (32 & 64 Bit); other OS (QNX, etc) on request
All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.
Version 1.1.6
19
CMOS Camera
MV-d752e SeRIeS
CCIR camera with proprietary Photonfocus sensor
Features
Photonfocus A1024B CMOS image sensor 752 x 582 pixel resolution Dynamic range up to 120 dB via LinLog Up to 87 fps @ full resolution Global shutter Monochrome Extended features CameraLink and USB 2.0 interface 12 bit greyscale resolution
Compatible with
COMPATIBLE WITH
LabVIEW
NATIONAL INSTRUMENTS
50%
Quantum Efficiency
40%
30%
20%
10%
0% 200 300 400 500 600 700 800 900 1000 1100 Wavelength [nm]
20
MV-D752E-40-U2-12
Photonfocus A1024B (2. Generation) CMOS active pixel (APS) Progressive scan 2/3 (10.12 mm diagonal) 752 x 582 pixels 10.6 m x 10.6 m 8.0 mm x 6.2 mm 2 fA/pixel @ 30C ~200 ke < 400 to 900 nm 120 x 10 DN / (J/m) @ 610 nm / 8 bit / gain = 1 (approximately 350 DN / (lux s) @ 610 nm / 8 bit / gain = 1) 45 % @ 550 nm 35 % (geometrical) 60 dB in linear mode; 120 dB with LinLog Monochrome Linear, LinLog, Skimming Global shutter Sequential read out
Camera
Exposure time Frame rate Pixel clock Camera taps Greyscale resolution Fixed pattern noise (FPN) Analogue gain Digital gain Configuration interface Trigger modes Features Interface Operating temperature Power supply Power consumption Lens mount Dimensions (H x W x L) Mass Conformity Specials 10 s 0.41 s / 25 ns steps 87 fps 40 MHz 1 8 bit / 10 bit / 12 bit < 1 DN RMS @ 8 bit / gain = 1 / offset correction ON 1 1/2/4 CL SERIAL (9600 Baud) Free running (non triggered) Interface trigger External trigger input Region of Interest (ROI) 16 Multiple ROI (MROI) Decimation X and Y Image correction Look-up table (LUT) Constant frame rate Image information Extended trigger input and strobe output functionality CameraLink Base USB 2.0 0C ... +60C +12 V DC (10%) 1.6 W 3.0 W C-Mount (CS-Mount optional) 55 x 55 x 32 mm 55 x 55 x 49 mm 200 g 210 g CE / RoHS / WEEE Adjustable backfocus; Opto-isolated I/Os
Software
Camera control OS PFRemote graphical user interface (GUI) and PFLib (SDK) USB 2.0: MicroDisplay (GUI) and PFLib (SDK) CL: Windows and Linux (32 & 64 Bit); other OS (QNX, etc) on request USB 2.0: win2k; winxp
All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.
Version 1.1.5
21
CMOS Camera
dS1-d1024 SeRIeS
1 Megapixel resolution with proprietary Photonfocus sensor
Features
Photonfocus A1024B CMOS image sensor 1024 x 1024 pixel resolution Dynamic range up to 60 dB Up to 150 fps @ full resolution Global shutter Monochrome Standard features CameraLink, PoCL and USB 2.0 interface 10 bit greyscale resolution
Compatible with
COMPATIBLE WITH
LabVIEW
NATIONAL INSTRUMENTS
50%
Quantum Efficiency
40%
30%
20%
10%
0% 200 300 400 500 600 700 800 900 1000 1100 Wavelength [nm]
22
DS1-D1024-160-CL-10 DS1-D1024-160-PC-10
Image sensor Technology Scanning system Optical format / diagonal Resolution Pixel size Active optical area Dark current Full well capacity Spectral range Responsivity Quantum Efficiency Optical fill factor Dynamic range Colour format Characteristic curve Shutter mode Read out mode
Photonfocus A1024B (2. Generation) CMOS active pixel (APS) Progressive scan 1 (15.42 mm diagonal) 1024 x 1024 pixels 10.6 m x 10.6 m 10.9 mm x 10.9 mm (maximum) 2 fA/pixel @ 30C ~200 ke < 400 to 900 nm 120 x 10 DN / (J/m) @ 610 nm / 8 bit / gain = 1 (approximately 350 DN / (lux s) @ 610 nm / 8 bit / gain = 1) 45 % @ 550 nm 35 % (geometrical) Up to 60 dB Monochrome Linear Global shutter Sequential read out Sequential or simultaneous read out (read out during exposure)
Camera
Exposure time Frame rate Pixel clock Camera taps Greyscale resolution Fixed pattern noise (FPN) Analogue gain Digital gain Configuration interface Trigger modes Features Interface Operating temperature Power supply Power consumption Lens mount Dimensions (H x W x L) Mass Conformity Specials 10 s 0.41 s / 25 ns steps 37 fps 40 MHz 1 10 s 0.83 s / 50 ns steps 75 fps 10 s 0.41 s / 25 ns steps 150 fps 80 MHz
2 8 bit / 10 bit < 2.5 DN RMS @ 8 bit / gain = 1 1 1 CL SERIAL (9600 Baud) Free running (non triggered) Interface trigger External trigger input Region of Interest (ROI) Image correction Image information Standard trigger input and strobe output functionality CameraLink Base CameraLink Base PoCL - Power over CameraLink Base PoCL - Power over CameraLink Base USB 2.0 0C ... +60C +12 V DC (10%) 1.6 W (CL) / 3.0 W (USB 2.0) 3.0 W 3.2 W C-Mount (CS-Mount optional) 55 x 55 x 32 mm (CL) 55 x 55 x 40 mm 55 x 55 x 43 mm (USB 2.0) 200 g 210 g CE / RoHS / WEEE Adjustable backfocus; Opto-isolated I/Os
Software
Camera control OS PFRemote graphical user interface (GUI) and PFLib (SDK) USB 2.0: MicroDisplay (GUI) and PFLib (SDK) CL: Windows and Linux (32 & 64 Bit); other OS (QNX, etc) on request USB 2.0: win2k; winxp
All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.
Version 1.1.5
23 23
CMOS Camera
MV-d1024e SeRIeS
1 Megapixel resolution with proprietary Photonfocus sensor
Features
Photonfocus A1024B CMOS image sensor 1024 x 1024 pixel resolution Dynamic range up to 120 dB via LinLog Up to 150 fps @ full resolution Global shutter Monochrome Extended features CameraLink, PoCL and USB 2.0 interface 12 bit greyscale resolution
Compatible with
COMPATIBLE WITH
LabVIEW
NATIONAL INSTRUMENTS
50%
Quantum Efficiency
40%
30%
20%
10%
0% 200 300 400 500 600 700 800 900 1000 1100 Wavelength [nm]
24
MV-D1024E-160-CL-12 MV-D1024E-160-PC-12
Image sensor Technology Scanning system Optical format / diagonal Resolution Pixel size Active optical area Dark current Full well capacity Spectral range Responsivity Quantum Efficiency Optical fill factor Dynamic range Colour format Characteristic curve Shutter mode Read out mode
Photonfocus A1024B (2. Generation) CMOS active pixel (APS) Progressive scan 1 (15.42 mm diagonal) 1024 x 1024 pixels 10.6 m x 10.6 m 10.9 mm x 10.9 mm (maximum) 2 fA/pixel @ 30C ~200 ke < 400 to 900 nm 120 x 10 DN / (J/m) @ 610 nm / 8 bit / gain = 1 (approximately 350 DN / (lux s) @ 610 nm / 8 bit / gain = 1) 45 % @ 550 nm 35% (geometrical) 60 dB in linear mode; 120 dB with LinLog Monochrome Linear, LinLog, Skimming Global shutter Sequential read out Sequential or simultaneous read out (read out during exposure)
Camera
Exposure time Frame rate Pixel clock Camera taps Greyscale resolution Fixed pattern noise (FPN) Analogue gain Digital gain Configuration interface Trigger modes Features Interface Operating temperature Power supply Power consumption Lens mount Dimensions (H x W x L) Mass Conformity Specials 10 s 0.41 s / 25 ns steps 37 fps 40 MHz 1 10 s 0.83 s / 50 ns steps 75 fps 10 s 0.41 s / 25 ns steps 150 fps 80 MHz
2 8 bit / 10 bit / 12 bit < 1 DN RMS @ 8 bit / gain = 1 / offset correction ON 1 1/2/4 CL SERIAL (9600 Baud) CL SERIAL (9600 or 57600 Baud, user selectable) Free running (non triggered) Interface trigger External trigger input Region of Interest (ROI) 16 Multiple ROI (MROI) Decimation X(1) and Y Image correction Look-up table (LUT) Constant frame rate Image information Extended trigger input and strobe output functionality CameraLink Base CameraLink Base PoCL - Power over CameraLink Base PoCL - Power over CameraLink Base USB 2.0 0C ... +60C +12 V DC (10%) 1.6 W (CL) / 3.0 W (USB 2.0) 3.0 W 3.2 W C-Mount (CS-Mount optional) 55 x 55 x 40 mm 55 x 55 x 32 mm (CL) 55 x 55 x 43 mm (USB 2.0) 200 g 210 g CE / RoHS / WEEE Adjustable backfocus; Opto-isolated I/Os
Software
Camera control OS
(1)
PFRemote graphical user interface (GUI) and PFLib (SDK) USB 2.0: MicroDisplay (GUI) and PFLib (SDK) CL: Windows and Linux (32 & 64 Bit); other OS (QNX, etc) on request USB 2.0: win2k; winxp
All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.
Version 1.1.8 25
25
CMOS Camera
MV2-d1280-640-CL-8
Very fast 1.3 Megapixel resolution CMOS camera
Features
Aptina MT9M413 CMOS image sensor 1280 x 1024 pixel resolution Dynamic range up to 60 dB Up to 490 fps @ full resolution Global shutter Monochrome Extended features CameraLink Full interface 10 bit greyscale resolution
Compatible with
COMPATIBLE WITH
LabVIEW
NATIONAL INSTRUMENTS
Quantum Efficiency
0.06 0.05 0.04 0.03 0.02 0.01 0.00 200 300 400 500 600 700 800 900 1000 1100
Wavelength [nm]
26
Camera
Exposure time Frame rate Pixel clock Camera taps Greyscale resolution Fixed pattern noise (FPN) Analogue gain Digital gain Configuration interface Trigger modes Features Interface Operating temperature Power supply Power consumption Lens mount Dimensions (H x W x L) Mass Conformity Specials 10 s 100 ms / 2 ns steps 488 fps 66 MHz (10 tap mode), 82.5 MHz (8 tap mode) 8 / 10 8 bit <0.5% rms / 1.5 % pp 1 1/2/4 CL SERIAL (9600 or 57600 Baud, user selectable) Free running (non triggered) Interface trigger External trigger input Region of Interest (ROI) 16 Multiple ROI (MROI) Decimation Y Image correction Look-up table (LUT) Constant frame rate Image information Extended trigger input and strobe output functionality CameraLink Full 0C ... +60C +12 V DC (10%) 4.2 W M42x1, F-Mount, C-Mount (CS-Mount optional) 78 x 78 x 46.2 mm 374 g CE / RoHS / WEEE / Shock and Vibration tests IEC 68-2-6, IEC 68-2-27, IEC 68-2-29 Adjustable backfocus; Opto-isolated I/Os
Software
Camera control OS PFRemote graphical user interface (GUI) and PFLib (SDK) Windows and Linux (32 & 64 Bit); other OS (QNX, etc) on request
All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.
Version 1.1.5
27 27
CMOS Camera
dS1-d1312 SeRIeS
1.4 Megapixel resolution with proprietary Photonfocus sensor
Features
Photonfocus A1312 CMOS image sensor 1312 x 1082 pixel resolution Good NIR response Dynamic range up to 60 dB Up to 108 fps @ full resolution Global shutter Monochrome Standard features CameraLink interface 10 bit greyscale resolution
Compatible with
COMPATIBLE WITH
LabVIEW
NATIONAL INSTRUMENTS
50%
Quantum Efficiency
40%
30%
20%
10%
0% 200 300 400 500 600 700 800 900 1000 1100 Wavelength [nm]
28
DS1-D1312-40-CL-10
DS1-D1312-160-CL-10
Image sensor Technology Scanning system Optical format / diagonal Resolution Pixel size Active optical area Dark current Full well capacity Spectral range Responsivity Quantum Efficiency Optical fill factor Dynamic range Colour format Characteristic curve Shutter mode Read out mode
Photonfocus A1312 (3. Generation) CMOS active pixel (APS) Progressive scan 1 (13.6 mm diagonal) maximum resolution 2/3 (11.6 mm diagonal) 1024 x 1024 resolution 1312 x 1082 pixels 8 m x 8 m 10.48 mm x 8.64 mm (maximum) 0.65 fA/pixel ~100 ke < 370 to 1000 nm (to 10 % of peak responsivity) 210 x 10 DN / (J/m) @ 625 nm / 8 bit / gain = 1 (approximately 620 DN / (lux s) @ 625 nm / 8 bit / gain = 1) > 50 % > 60 % Up to 60 dB Monochrome Linear Global shutter Sequential read out or simultaneous read out (read out during exposure)
Camera
Exposure time Frame rate Pixel clock Camera taps Greyscale resolution Fixed pattern noise (FPN) Analogue gain Digital gain Configuration interface Trigger modes Features Interface Operating temperature Power supply Power consumption Lens mount Dimensions (H x W x L) Mass Conformity Specials 10 s 1.68 s / 100 ns steps 27 fps 40 MHz 1 10 s 0.83 s / 50 ns steps 55 fps 10 s 0.41 s / 25 ns steps 108 fps 80 MHz
2 8 bit / 10 bit < 1 DN @ 8 bit / correction ON 1 1 CL SERIAL (9600 Baud) Free running (non triggered) Interface trigger External trigger input Region of Interest (ROI) Image correction Standard trigger input and strobe output functionality CameraLink Base 0C ... +50C +12 V DC (10%) 2.5 W < 3.0 W < 3.3 W C-Mount (CS-Mount optional) 60 x 60 x 45 mm 265 g CE / RoHS / WEEE Adjustable backfocus; Opto-isolated I/Os
Software
Camera control OS PFRemote graphical user interface (GUI) and PFLib (SDK) Windows and Linux (32 & 64 Bit); other OS (QNX, etc) on request
All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.
Version 1.1.5
29
CMOS Camera
MV1-d1312 SeRIeS
1.4 Megapixel resolution with proprietary Photonfocus sensor
Features
Photonfocus A1312 CMOS image sensor 1312 x 1082 pixel resolution Good NIR response Dynamic range up to 120 dB via LinLog Up to 170 fps @ full resolution Global shutter Monochrome Extended features CameraLink and GigE interface 12 bit greyscale resolution
Compatible with
COMPATIBLE WITH
LabVIEW
NATIONAL INSTRUMENTS
50%
Quantum Efficiency
40%
30%
20%
10%
0% 200 300 400 500 600 700 800 900 1000 1100 Wavelength [nm]
30
MV1-D1312-40-CL-12 MV1-D1312-40-GB-12
MV1-D1312-160-CL-12 MV1-D1312-100-GB-12
MV1-D1312-240-CL-8
Image sensor Technology Scanning system Optical format / diagonal Resolution Pixel size Active optical area Dark current Full well capacity Spectral range Responsivity Quantum Efficiency Optical fill factor Dynamic range Colour format Characteristic curve Shutter mode Read out mode
Photonfocus A1312 (3. Generation) CMOS active pixel (APS) Progressive scan 1 (13.6 mm diagonal) maximum resolution 2/3 (11.6 mm diagonal) 1024 x 1024 resolution 1312 x 1082 pixels 1248 x 1082 pixels 8 m x 8 m 10.48 mm x 8.64 mm (maximum) 0.65 fA/pixel ~100 ke < 370 to 1000 nm (to 10 % of peak responsivity) 210 x 10 DN / (J/m) @ 625 nm / 8 bit / gain = 1 (approximately 620 DN / (lux s) @ 625 nm / 8 bit / gain = 1) > 50 % > 60 % 60 dB in linear mode; 120 dB with LinLog Monochrome Linear, LinLog Global shutter Sequential read out or simultaneous read out (read out during exposure only in linear mode) for higher frame rates
Camera
Exposure time Frame rate Pixel clock Camera taps Greyscale resolution Fixed pattern noise (FPN) Analogue gain Digital gain Configuration interface Trigger modes Features Interface Operating temperature Power supply Power consumption Lens mount Dimensions (H x W x L) Mass Conformity Specials 10 s 1.68 s / 100 ns steps 10 s 0.83 s / 50 ns steps 10 s 0.67 s / 40 ns steps (GigE) 10 s 0.279 s / 16.67 ns steps 10 s 0.41 s / 25 ns steps (CL) 27 fps 55 fps 68 fps (GigE) / 108 fps (CL) 170 fps 40 MHz 50 MHz (GigE) / 80 MHz (CL) 1 2 3 8 bit / 10 bit / 12 bit 8 bit < 1 DN @ 8 bit / correction ON 1 1/2/4/8 CL SERIAL (9600, 57600 or 115200 Baud, user selectable) Free running (non triggered) Interface trigger External trigger input Software trigger Region of Interest (ROI) 512 Multiple ROI (MROI)(1) Decimation Y(1) Image correction 2 Look-up tables (LUT)(1) Constant frame rate Crosshair(1) Convolver 3x3 Temperature(1) Image information Extended trigger input and strobe output functionality CameraLink Base or GigE 0C ... +50C +12 V DC (10%) 2.5 W (CL) / < 4.5 W (GigE) < 3.0 W (CL) / < 5.0 W (GigE) < 3.3 W (CL) / < 5.2 W (GigE) < 5.2 W C-Mount (CS-Mount optional) 60 x 60 x 45 mm (CL) / 60 x 60 x 99 mm (GigE) 265 g (CL) / 465 g (GigE) CE / RoHS / WEEE Adjustable backfocus; Opto-isolated I/Os
Software
Camera control OS
(1)
PFRemote graphical user interface (GUI) and PFLib (SDK) GigE: graphical user interface GEV Player and SDK Windows and Linux (32 & 64 Bit); other OS (QNX, etc) on request
Features only available for CameraLink cameras (for GigE cameras on request)
All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.
Version 1.2.3
31
CMOS Camera
MV1-d1312C-160-CL-12
1.4 Megapixel resolution with proprietary Photonfocus sensor
Features
Photonfocus A1312C CMOS image sensor 1312 x 1082 pixel resolution Integrated NIR cut-off filter(1) Dynamic range up to 60 dB Up to 108 fps @ full resolution Global shutter Colour (RGB Bayer) Standard features CameraLink interface 12 bit output format
Compatible with
COMPATIBLE WITH
LabVIEW
NATIONAL INSTRUMENTS
32
Camera
Exposure time Frame rate Pixel clock Camera taps Greyscale resolution Fixed pattern noise (FPN) Analogue gain Digital gain Configuration interface Trigger modes Features Interface Operating temperature Power supply Power consumption Lens mount Dimensions (H x W x L) Mass Conformity Specials 10 s 0.41 s / 25 ns steps 108 fps 80 MHz 2 8 bit / 10 bit / 12 bit < 1 DN @ 8 bit / correction ON 1 1/2/4/8 CL SERIAL (9600, 57600 or 115200 Baud, user selectable) Free running (non triggered) Interface trigger External trigger input Software trigger Region of Interest (ROI) 512 Multiple ROI (MROI) Image correction 2 Look-up tables (LUT) Constant frame rate Digital fine gain Colour fine gain Temperature Image information Extended trigger input and strobe output functionality CameraLink Base 0C ... +50C +12 V DC (10%) < 3.5 W C-Mount (CS-Mount optional) 60 x 60 x 45 mm 265 g CE / RoHS / WEEE Adjustable backfocus; Opto-isolated I/Os
Software
Camera control OS
(1)
PFRemote graphical user interface (GUI) and PFLib (SDK) Windows and Linux (32 & 64 Bit); other OS (QNX, etc) on request
All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.
Version 1.0.2
33
CMOS Camera
MV1-d1312I SeRIeS
1.4 Megapixel resolution with proprietary Photonfocus sensor
Features
Photonfocus A1312I CMOS image sensor 1312 x 1082 pixel resolution Excellent NIR response Dynamic range up to 120 dB via LinLog Up to 108 fps @ full resolution Global shutter Monochrome Extended features CameraLink and GigE interface 12 bit greyscale resolution
Compatible with
COMPATIBLE WITH
LabVIEW
NATIONAL INSTRUMENTS
50%
Quantum Efficiency
40%
30%
20%
10%
0% 200 300 400 500 600 700 800 900 1000 1100 Wavelength [nm]
34
MV1-D1312I-40-CL-12 MV1-D1312I-40-GB-12
MV1-D1312I-160-CL-12 MV1-D1312I-100-GB-12
Image sensor Technology Scanning system Optical format / diagonal Resolution Pixel size Active optical area Dark current Full well capacity Spectral range Responsivity Quantum Efficiency Optical fill factor Dynamic range Colour format Characteristic curve Shutter mode Read out mode
Photonfocus A1312I (3. Generation) CMOS active pixel (APS) Progressive scan 1 (13.6 mm diagonal) maximum resolution 2/3 (11.6 mm diagonal) 1024 x 1024 resolution 1312 x 1082 pixels 8 m x 8 m 10.48 mm x 8.64 mm (maximum) 1.15 fA/pixel ~100 ke < 370 to 1100 nm (to 10 % of peak responsivity) 300 x 10 DN / (J/m) @ 850 nm / 8 bit / gain = 1 > 50 % > 60 % 60 dB in linear mode; 120 dB with LinLog Monochrome Linear, LinLog Global shutter (read out during exposure only in linear mode) for higher frame rates
Camera
Exposure time Frame rate Pixel clock Camera taps Greyscale resolution Fixed pattern noise (FPN) Analogue gain Digital gain Configuration interface Trigger modes Features Interface Operating temperature Power supply Power consumption Lens mount Dimensions (H x W x L) Mass Conformity Specials 10 s 1.68 s / 100 ns steps 27 fps 40 MHz 1 10 s 0.83 s / 50 ns steps 55 fps 10 s 0.67 s / 40 ns steps (GigE) 10 s 0.41 s / 25 ns steps (CL) 68 fps (GigE) / 108 fps (CL) 50 MHz (GigE) / 80 MHz (CL)
2 8 bit / 10 bit / 12 bit < 1 DN @ 8 bit / correction ON 1 1/2/4/8 Gigabit Ethernet / CL SERIAL (9600, 57600 or 115200 Baud, user selectable) Free running (non triggered) Interface trigger External trigger input Software trigger Region of Interest (ROI) 512 Multiple ROI (MROI)(1) Decimation Y(1) Image correction 2 Look-up tables (LUT)(1) Constant frame rate Crosshair(1) Convolver 3x3 Temperature(1) Image information Extended trigger input and strobe output functionality CameraLink Base or GigE 0C ... +50C +12 V DC (10%) 2.5 W (CL) / < 4.5 W (GigE) < 3.0 W (CL) / < 5.0 W (GigE) < 3.3 W (CL) / < 5.2 W (GigE) C-Mount (CS-Mount optional) 60 x 60 x 45 mm (CL) / 60 x 60 x 99 mm (GigE) 265 g (CL) / 465 g (GigE) CE / RoHS / WEEE Adjustable backfocus; Opto-isolated I/Os
Software
Camera control OS
(1)
PFRemote graphical user interface (GUI) and PFLib (SDK) GigE: graphical user interface GEV Player and SDK Windows and Linux (32 & 64 Bit); other OS (QNX, etc) on request
Features only available for CameraLink cameras (for GigE cameras on request)
All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.
Version 1.1.7
35 35
CMOS Camera
MV1-d1312Ie SeRIeS
1.4 Megapixel resolution with proprietary Photonfocus sensor
Features
Photonfocus A1312IE CMOS image sensor 1312 x 1082 pixel resolution Very good NIR response Dynamic range up to 120 dB via LinLog Up to 108 fps @ full resolution Global shutter Monochrome Extended features CameraLink 12 bit greyscale resolution
COMPATIBLE WITH
Compatible with
LabVIEW
NATIONAL INSTRUMENTS
50%
Quantum Efficiency
40%
30%
20%
10%
0% 200 300 400 500 600 700 Wavelength [nm] 800 900 1000 1100
36
MV1-D1312IE-160-CL-12
Photonfocus A1312IE (3. Generation) CMOS active pixel (APS) Progressive scan 1 (13.6 mm diagonal) maximum resolution 2/3 (11.6 mm diagonal) 1024 x 1024 resolution 1312 x 1082 pixels 8 m x 8 m 10.48 mm x 8.64 mm (maximum) 0.65 fA/pixel ~100 ke < 370 to 1050 nm (to 10 % of peak responsivity) 280 x 10 DN / (J/m) @ 850 nm / 8 bit / gain = 1 > 45 % > 60 % 60 dB in linear mode; 120 dB with LinLog Monochrome Linear, LinLog Global shutter Sequential read out or simultaneous read out (read out during exposure only in linear mode) for higher frame rates
Camera
Exposure time Frame rate Pixel clock Camera taps Greyscale resolution Fixed pattern noise (FPN) Analogue gain Digital gain Configuration interface Trigger modes Features Interface Operating temperature Power supply Power consumption Lens mount Dimensions (H x W x L) Mass Conformity Specials 10 s 1.68 s / 100 ns steps 27 fps 40 MHz 1 10 s 0.41 s / 25 ns steps 108 fps 80 MHz 2
8 bit / 10 bit / 12 bit < 1 DN @ 8 bit / correction ON 1 0.1 to 15.99 (Fine Gain) CL SERIAL (9600, 57600 or 115200 Baud, user selectable) Free running (non triggered) Interface trigger External trigger input Software trigger Region of Interest (ROI) 512 Multiple ROI (MROI) Decimation Y Image correction 2 Look-up tables (LUT) Constant frame rate Crosshair Convolver 3x3 Temperature Image information Extended trigger input and strobe output functionality CameraLink Base 0C ... +50C +12 V DC (10%) 2.5 W < 3.3 W C-Mount (CS-Mount optional) 60 x 60 x 45 mm 265 g CE / RoHS / WEEE Adjustable backfocus; Opto-isolated I/Os
Software
Camera control OS PFRemote graphical user interface (GUI) and PFLib (SDK) Windows and Linux (32 & 64 Bit); other OS (QNX, etc) on request
All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.
Version 1.0.0
37
CMOS Camera
MV1-d2080 SeRIeS
4 Megapixel resolution with proprietary Photonfocus sensor
Features
Photonfocus A2080 CMOS image sensor 2080 x 2080 pixel resolution Good NIR response Dynamic range up to 120 dB via LinLog Up to 51 fps @ full resolution Global shutter Monochrome Extended features CameraLink interface 12 bit greyscale resolution Exceptional SNR
COMPATIBLE WITH
Compatible with
LabVIEW
NATIONAL INSTRUMENTS
50%
Quantum Efficiency
40%
30%
20%
10%
0% 200 300 400 500 600 700 800 900 1000 1100 Wavelength [nm]
38
MV1-D2080-240-CL-8
Photonfocus A2080 (3. Generation) CMOS active pixel (APS) Progressive scan 23.5 mm diagonal @ max. resolution ( < 25 mm image circle) 2080 x 2080 pixels 8 m x 8 m 16.64 mm x 16.64 mm (maximum) 0.65 fA/pixel ~90 ke (Max SNR > 300:1) < 370 to 1000 nm (to 10 % of peak responsivity) 210 x 10 DN / (J/m) @ 625 nm / 8 bit / gain = 1 (approximately 620 DN / (lux s) @ 625 nm / 8 bit / gain = 1) > 50 % > 60 % 60 dB in linear mode; 120 dB with LinLog Monochrome Linear, LinLog Global shutter Sequential read out or simultaneous read out (read out during exposure only in linear mode) for higher frame rates
Camera
Exposure time Frame rate Pixel clock Camera taps Greyscale resolution Fixed pattern noise (FPN) Analogue gain Digital gain Configuration interface Trigger modes Features Interface Operating temperature Power supply Power consumption Lens mount Dimensions (H x W x L) Mass Conformity Specials 10 s 0.41 s / 25 ns steps 34 fps 80 MHz 3 8 bit < 1 DN @ 8 bit / correction ON 1 Digital fine gain (0.1 15.9 / 0.001 steps) CL SERIAL (up to 1.5 MBaud, user selectable) Free running (non triggered) Interface trigger External trigger input Software trigger Region of Interest (ROI) 512 Multiple ROI (MROI) Decimation Y Image correction 2 Look-up tables (LUT) Constant frame rate Convolver Crosshair Temperature & Image information Extended trigger input and strobe output functionality Status line CameraLink Base 0C ... +50C +12 V DC (10%) < 5 W (over full operating range) M42x1, F-Mount, C-Mount 1.3 60 x 60 x 38 mm 222 g CE / RoHS / WEEE Opto-isolated I/Os 2 8 bit / 10 bit / 12 bit 10 s 0.279 s / 16.67 ns steps 51 fps
Software
Camera control OS PFRemote graphical user interface (GUI) and PFLib (SDK) Windows and Linux (32 & 64 Bit); other OS (QNX, etc) on request
All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.
Version 1.0.3
39
CMOS Camera
MV-d1024e-PP01-40-CL-8
1 Megapixel camera with extended image preprocessing options
Features
Photonfocus A1024B CMOS image sensor 1024 x 1024 pixel resolution Real time image preprocessing on camera FPGA Dynamic range up to 120 dB via LinLog Up to 37 fps @ full resolution Global shutter Monochrome CameraLink interface 12 bit greyscale resolution
Advantages
Reduction of vision system computer CPU load Removed reliance on specialised framegrabber or HW accelerators Pixel Professor Lab a free GUI for easy graphical programming of the camera FPGA Common image preprocessing operators (e.g. Median, Convolver 3x3, )
40
Camera
Exposure time Frame rate Pixel clock Camera taps Greyscale resolution Fixed pattern noise (FPN) Analogue gain Digital gain Configuration interface Trigger modes Features Interface Operating temperature Power supply Power consumption Lens mount Dimensions (H x W x L) Mass Conformity Specials 10 s 0.41 s / 25 ns steps 37 fps 40 MHz 1 8 bit < 1 DN RMS @ 8 bit / gain = 1 / offset correction ON 1 1/2/4 CL SERIAL (9600 Baud) Free running (non triggered) Interface trigger External trigger input Region of Interest (ROI) 16 Multiple ROI (MROI) Decimation X and Y Image correction Look-up table (LUT) Constant frame rate Image information Convolvers Median Filters Pixel arithmetic Pipeline Processors Extended trigger input and strobe output functionality CameraLink Base 0C ... +60C +12 V DC (10%) 2.6 W C-Mount (CS-Mount optional) 55 x 55 x 40 mm 220 g CE / RoHS / WEEE Adjustable backfocus; Opto-isolated I/Os
Software
Camera control Pixel Professor configuration OS PFRemote graphical user interface (GUI) and PFLib (SDK) Pixel Professor Lab win2k; winxp; winvista; other OS (Linux, QNX, etc) on request
All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.
Version 1.1.5
41
SM2-d1024-80-GB-12
1 Megapixel smart camera with programmable dSP
Features
Photonfocus A1024B CMOS image sensor 1024 x 1024 pixel resolution Programmable Texas Instruments DSP HALCON Embedded compatible Dynamic range up to 120 dB via LinLog Up to 75 fps @ full resolution Global shutter Monochrome GigE interface 12 bit greyscale resolution
Compatible with
50%
Quantum Efficiency
40%
30%
20%
10%
0% 200 300 400 500 600 700 800 900 1000 1100 Wavelength [nm]
42
SM2-D1024-80-GB-12
VisionCam PS Type 1*
Image sensor
Image sensor Technology Scanning system Optical format / diagonal Resolution Pixel size Active optical area Dark current Full well capacity Spectral range Responsivity Quantum Efficiency Optical fill factor Dynamic range Colour format Characteristic curve Shutter mode Read out mode Photonfocus A1024B (2. Generation) CMOS active pixel (APS) Progressive scan 1 (15.42 mm diagonal) 1024 x 1024 pixels 10.6 m x 10.6 m 10.9 mm x 10.9 mm (maximum) 2 fA/pixel @ 30C ~200 ke < 400 to 900 nm 120 x 10 DN / (J/m) @ 610 nm / 8 bit / gain = 1 (approximately 350 DN / (lux s) @ 610 nm / 8 bit / gain = 1) 45 % @ 550 nm 35 % (geometrical) 60 dB in linear mode; 120 dB with LinLog Monochrome Linear, LinLog, Skimming Global shutter Sequential or simultaneous read out (read out during exposure)
Camera
Exposure time Frame rate Pixel clock Camera taps Greyscale resolution Fixed pattern noise (FPN) Analogue gain Digital gain Configuration interface Trigger modes Features CPU / RAM / Storage Interface Operating temperature Power supply Power consumption Lens mount Dimensions (H x W x L) Mass Conformity Specials 10 s 0.83 s / 50 ns steps 75 fps 40 MHz 2 (internal) 8 bit / 10 bit / 12 bit < 1 DN RMS @ 8 bit / gain = 1 / offset correction ON 1 1/2/4 Built-in Webserver Free running (non triggered) Interface trigger External trigger input Region of Interest (ROI) 16 Multiple ROI (MROI) Decimation Y Image correction Look-up table (LUT) Constant frame rate Image information Realtime clock FTP Server Extended trigger input and strobe output functionality Texas Instruments TMS320 C6415 @ 1GHz, 8000 MIPS / 256 MB SDRAM / 2 GB SD Card GigE 0C ... +50C +12 V DC (10%) 8.0 W C-Mount (CS-Mount optional) 60 x 60 x 127 mm 532 g CE / RoHS / WEEE Adjustable backfocus; Opto-isolated I/Os; JTAG, RS232 Interface, RS422 Interface
Software
Camera control DSP Development tools
* Product name used by Imago Technologies
Built-in webserver Texas Instruments Code Composer Studio 3.3, HALCON Embedded
All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.
Version 1.1.8
43
SM2-d1312 SeRIeS
1.4 Megapixel smart camera with programmable dSP
Features
Photonfocus A1312 CMOS image sensor 1312 x 1082 pixel resolution Programmable Texas Instruments DSP HALCON Embedded compatible Dynamic range up to 120 dB via LinLog Up to 108 fps @ full resolution JPEG compression @ 68 fps(1) Global shutter Monochrome GigE interface 12 bit greyscale resolution
Compatible with
50%
Quantum Efficiency
40%
30%
20%
10%
0% 200 300 400 500 600 700 800 900 1000 1100 Wavelength [nm]
44
SM2-D1312-80-GB-12
VisionCam PS Type 2*
SM2-D1312-JPEG-100-GB-12
VisionCam PS Type 2*
SM2-D1312-160-GB-12
VisionCam PS Type 2*
Image sensor
Image sensor Technology Scanning system Optical format / diagonal Resolution Pixel size Active optical area Dark current Full well capacity Spectral range Responsivity Quantum Efficiency Optical fill factor Dynamic range Colour format Characteristic curve Shutter mode Read out mode Photonfocus A1312 (3. Generation) CMOS active pixel (APS) Progressive scan 1 (13.6 mm diagonal) maximum resolution 2/3 (11.6 mm diagonal) 1024 x 1024 resolution 1312 x 1082 pixels 8 m x 8 m 10.48 mm x 8.64 mm (maximum) 0.65 fA/pixel ~100 ke < 370 to 1000 nm (to 10 % of peak responsivity) 210 x 10 DN / (J/m) @ 625 nm / 8 bit / gain = 1 (approximately 620 DN / (lux s) @ 625 nm / 8 bit / gain = 1) > 50 % > 60 % 60 dB in linear mode; 120 dB with LinLog Monochrome Linear, LinLog Global shutter Sequential or simultaneous read out (read out during exposure only in linear mode) for higher frame rates
Camera
Exposure time Frame rate Pixel clock Camera taps Greyscale resolution Fixed pattern noise (FPN) Analogue gain Digital gain Configuration interface Trigger modes Features CPU / RAM / Storage Interface Operating temperature Power supply Power consumption Lens mount Dimensions (H x W x L) Mass Conformity Specials 10 s 0.67 s / 40 ns steps 10 s 0.41 s / 25 ns steps 68 fps 108 fps 50 MHz 80 MHz 2 (internal) 8 bit / 10 bit / 12 bit 8 bit < 1 DN RMS @ 8 bit / gain = 1 / offset correction ON 1 1/2/4/8 Built-in Webserver Free running (non triggered) DSP controlled trigger External trigger input Region of Interest (ROI) 512 Multiple ROI (MROI) Decimation Y Image correction 2 Look-up tables (LUT) Constant frame rate Crosshair Convolver 3x3 Temperature Image information Realtime clock JPEG Compression(1) FTP Server Extended trigger input and strobe output functionality Texas Instruments TMS320 C6415 @ 1GHz, 8000 MIPS / 256 MB SDRAM / 2 GB SD Card(2) GigE 0C ... +50C +12 V DC (10%) 10 W C-Mount (CS-Mount optional) 60 x 60 x 137 mm 572 g CE / RoHS / WEEE Adjustable backfocus; Opto-isolated I/Os; JTAG, RS232 Interface, RS422 Interface 10 s 0.83 s / 50 ns steps 55 fps 40 MHz
Software
Camera control DSP Development tools
(1) (2)
Built-in webserver Texas Instruments Code Composer Studio 3.3, HALCON Embedded
* Product name used by Imago Technologies Feature only available for SM2-D1312-JPEG-100-GB-12 camera (for other cameras on request) DSP TI TMS320 C6455 @ 1.2GHz, 9600 MIPS / 512 MB SDRAM (available on request)
All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG. Version 1.1.9
45
CMOS 3d Camera
MV-d1024e-3d01-160-CL-12
1 Megapixel 3d camera for laser triangulation applications
Features
Photonfocus A1024B CMOS image sensor 1024 x 1024 pixel resolution Realtime laserline Peak Detection algorithm on camera Dynamic range up to 120 dB via LinLog Up to 2500 profiles/s @ 1024 x 32 pixel resolution Global shutter Monochrome CameraLink interface 12 bit greyscale resolution Compatible with
COMPATIBLE WITH
LabVIEW
NATIONAL INSTRUMENTS
Advantages
No additional calculations on CPU Reduction of vision system computer CPU load PF 3D Suite a free GUI for an easy system set up and visualisation of 3D scans Higher accuracy and robustness through new Peak Detection algorithm
PF 3d Suite
46
Camera
Exposure time Frame rate Pixel clock Camera taps Greyscale resolution Fixed pattern noise (FPN) Analogue gain Digital gain Configuration interface Trigger modes Features Interface Operating temperature Power supply Power consumption Lens mount Dimensions (H x W x L) Mass Conformity Specials 10 s 0.41 s / 25 ns steps 150 fps @ full resolution / 2500 fps @ 1024 x 32 resolution / 3900 fps @ 512 x 32 resolution 80 MHz 2 8 bit / 10 bit / 12 bit < 1 DN RMS @ 8 bit / gain = 1 / offset correction ON 1 1/2/4 CL SERIAL (9600 or 57600 Baud, user selectable) Free running (non triggered) Interface trigger External trigger input Region of Interest (ROI) 16 Multiple ROI (MROI) Decimation Y Image correction Look-up table (LUT) Constant frame rate Image information Peak Detector Extended trigger input and strobe output functionality CameraLink Base 0C ... +50C +12 V DC (10%) 3.7 W C-Mount (CS-Mount optional) 55 x 55 x 40 mm 210 g CE / RoHS / WEEE Adjustable backfocus; Opto-isolated I/Os
Software
Camera control OS PF 3D Suite graphical user interface (GUI) and PF3DLib (SDK) win2k; winxp; winvista; other OS (Linux, QNX, etc) on request
All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.
Version 1.1.6
47 47
CMOS Camera
eL1-d1312-160-CL-12
electroluminescence camera with nIR sensitive Photonfocus sensor
Features
Photonfocus A1312 CMOS image sensor 1312 x 1082 pixel resolution Good NIR response Uncooled CMOS camera Designed for electroluminescence applications Global shutter Monochrome CameraLink interface 12 bit greyscale resolution
48
Camera
Exposure time Frame rate Pixel clock Camera taps Greyscale resolution Configuration interface Trigger modes Features Interface Operating temperature Power supply Power consumption Lens mount Dimensions (H x W x L) Mass Conformity Specials 10 ms .... 1.6 s / 100 ns steps 5 fps 80 MHz 2 12 bit CL SERIAL (9600 or 57600 Baud, user selectable) Free running (non triggered) Interface trigger External trigger input Optimized for electroluminescence applications CameraLink Base 0C ... +40C +12 V DC (10%) < 3.3 W C-Mount (CS-Mount optional) 60 x 60 x 45 mm 265 g CE / RoHS / WEEE Adjustable backfocus; Opto-isolated I/Os
Software
Camera control OS Electroluminescence API (PfEL1Lib ) win2k; winxp; winvista
All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.
Version 1.1.3
49 49
Accessories
CAMeRALInK RePeATeR
Link to the Success
Features
CameraLink extension up to 40 m 100% CameraLink compatible Compact & robust industrial housing Active clock and data regeneration With zero skew Bridging of long distances with CameraLink interface No cable insertion losses Automatic stand-by mode Power-up failsafe Plug and play
40
30
20
10
0 0 20 40 60 80 100
50
All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.
Version 1.1.0
51
Address
Photonfocus AG Bahnhofplatz 10 8853 Lachen Schweiz main office main office general sales support website +41 (0)55 451 00 00 +41 (0)55 451 00 01 info@photonfocus.com sales@photonfocus.com support@photonfocus.com www.photonfocus.com
Internet
Version 2.2.1