2-7/8 10.40 lbs/ft X-95 with 2-3/8 HT SLH90 3-1/8 OD x 1.975 ID Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Nominal Weight Adjusted Weight Capacity Displacement X-95 2-3/8 HT SLH90 N/A IU 10.40 lbs/ft 10.41 lbs/ft 0.187 US gal/ft 0.158 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDML) Burst Pressure Collapse Pressure Torsional Yield Strength Tool joint is weaker than tube in tension. Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility. New 2.875 in 2.151 in 0.362 in 2.858 in2 271,500 lbs 234,000 lbs 20,930 psi 20,910 psi 14,600 ft-lbs Premium 2.730 in 2.151 in 0.290 in 2.220 in2 210,900 lbs 183,300 lbs 19,140 psi 18,010 psi 11,200 ft-lbs
9/1/09
27802040183109702000
2-7/8 10.40 lbs/ft S-135 with 2-3/8 HT SLH90 3-1/8 OD x 1.975 ID Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Nominal Weight Adjusted Weight Capacity Displacement S-135 2-3/8 HT SLH90 N/A EU 10.40 lbs/ft 10.41 lbs/ft 0.187 US gal/ft 0.159 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDML) Burst Pressure Collapse Pressure Torsional Yield Strength New 2.875 in 2.151 in 0.362 in 2.858 in2 385,800 lbs 332,600 lbs 29,750 psi 29,720 psi 20,800 ft-lbs Premium 2.730 in 2.151 in 0.290 in 2.220 in2 299,800 lbs 260,400 lbs 27,200 psi 25,600 psi 15,900 ft-lbs
NOTE: Tool joint is weaker in tension than tube. Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility.
9/1/09
27802040183109702100
2-7/8 10.40 lbs/ft Internal Coated S-135 with 2-3/8 HT SLH90 3-1/8 OD x 1.975 ID Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Internal Coating Nominal Weight Adjusted Weight Capacity Displacement S-135 2-3/8 HT SLH90 N/A IU TK 34 XT 10.40 lbs/ft 10.41 lbs/ft 0.187 US gal/ft 0.159 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDXL) Burst Pressure Collapse Pressure Torsional Yield Strength New 2.875 in 2.151 in 0.362 in 2.858 in2 385,800 lbs 332,600 lbs 29,750 psi 29,720 psi 20,800 ft-lbs Premium 2.730 in 2.151 in 0.290 in 2.220 in2 299,800 lbs 260,400 lbs 27,200 psi 25,600 psi 15,900 ft-lbs
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility.
9/1/09
27802040183105302207
2-7/8 10.40 lbs/ft Internal Coated S-135 with 2-3/8 HT SL H90 3-3/8 OD x 1.813 ID Arnco 300 XT Hard Band Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Internal Coating Tool Joint Hard Band Nominal Weight Adjusted Weight Capacity Displacement S-135 WT 23 N/A IU TK 34 Arnco 300 XT 10.40 lbs/ft 10.98 lbs/ft 0.186 US gal/ft 0.163 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDXL) Burst Pressure Collapse Pressure Torsional Yield Strength Tube weaker than connection in tension. Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility. New 2.875 in 2.151 in 0.362 in 2.858 in2 385,800 lbs 332,600 lbs 29,750 psi 29,720 psi 20,800 ft-lbs Premium 2.730 in 2.151 in 0.290 in 2.220 in2 299,800 lbs 260,400 lbs 27,200 psi 25,600 psi 15,900 ft-lbs
9/1/09
27802010079107502000
2-7/8 10.40 lbs/ft E-75 with 2-7/8 PAC 3-1/8 OD x 1-1/2 ID Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Nominal Weight Adjusted Weight Capacity Displacement E-75 2-7/8 PAC N/A IU 10.40 lbs/ft 10.51 lbs/ft 0.183 US gal/ft 0.160 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDML) Burst Pressure Collapse Pressure Torsional Yield Strength New 2.875 in 2.151 in 0.362 in 2.858 in2 214,300 lbs 184,800 lbs 16,530 psi 16,510 psi 11,500 psi Premium 2.730 in 2.151 in 0.290 in 2.220 in2 166,500 lbs 144,700 lbs 15,110 psi 14,220 psi 8,900 psi
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility.
9/1/09
27802020079107502000
2-7/8 10.40 lbs/ft X-95 with 2-7/8 PAC 3-1/8 OD x 1-1/2 ID Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Nominal Weight Adjusted Weight Capacity Displacement X-95 2-7/8 PAC N/A IU 10.40 lbs/ft 10.51 lbs/ft 0.183 US gal/ft 0.160 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDML) Burst Pressure Collapse Pressure Torsional Yield Strength Tool joint is weaker than tube in tension. Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility. New 2.875 in 2.151 in 0.362 in 2.858 in2 271,500 lbs 234,000 lbs 20,930 psi 20,910 psi 14,600 ft-lbs Premium 2.730 in 2.151 in 0.290 in 2.220 in2 210,900 lbs 183,300 lbs 19,140 psi 18,010 psi 11,200 ft-lbs
9/1/09
27802030079107502000
2-7/8 10.40 lbs/ft G-105 with 2-7/8 PAC 3-1/8 OD x 1-1/2 ID Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Nominal Weight Adjusted Weight Capacity Displacement G-105 2-7/8 PAC N/A IU 10.40 lbs/ft 10.51 lbs/ft 0.183 US gal/ft 0.160 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDML) Burst Pressure Collapse Pressure Torsional Yield Strength Tool joint is weaker than tube in tension. Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility. New 2.875 in 2.151 in 0.362 in 2.858 in2 300,100 lbs 258,700 lbs 23,140 psi 23,110 psi 16,200 ft-lbs Premium 2.730 in 2.151 in 0.290 in 2.220 in2 233,100 lbs 202,600 lbs 21,150 psi 19,910 psi 12,400 ft-lbs
9/1/09
27802040079107502000
2-7/8 10.40 lbs/ft S-135 with 2-7/8 PAC 3-1/8 OD x 1-1/2 ID Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Nominal Weight Adjusted Weight Capacity Displacement S-135 2-7/8 PAC N/A IU 10.40 lbs/ft 10.51 lbs/ft 0.183 US gal/ft 0.160 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDML) Burst Pressure Collapse Pressure Torsional Yield Strength Tool joint is weaker in tension than tube. Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility. New 2.875 in 2.151 in 0.362 in 2.858 in2 385,800 lbs 332,600 lbs 29,750 psi 29,720 psi 20,800 ft-lbs Premium 2.730 in 2.151 in 0.290 in 2.220 in2 299,800 lbs 260,400 lbs 27,200 psi 25,600 psi 15,900 ft-lbs
9/1/09
27802040079107102000
2-7/8 10.40 lbs/ft S-135 with 2-7/8 PAC 3-1/8 OD x 1-1/4 ID Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Nominal Weight Adjusted Weight Capacity Displacement S-135 2-7/8 PAC N/A IU 10.40 lbs/ft 10.62 lbs/ft 0.182 US gal/ft 0.162 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDML) Burst Pressure Collapse Pressure Torsional Yield Strength Tool joint is weaker in tension than tube. Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility. New 2.875 in 2.151 in 0.362 in 2.858 in2 385,800 lbs 332,600 lbs 29,750 psi 29,720 psi 20,800 ft-lbs Premium 2.730 in 2.151 in 0.290 in 2.220 in2 299,800 lbs 260,400 lbs 27,200 psi 25,600 psi 15,900 ft-lbs
9/1/09
27802040179103202007
2-7/8 10.40 lbs/ft S-135 with 2-7/8 HT PAC 3-3/8 OD x 1-5/16 ID Arnco 300 XT Hard Band Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Tool Joint Hard Band Nominal Weight Adjusted Weight Capacity Displacement S-135 2-7/8 HT PAC N/A IU Arnco 300 XT 10.40 lbs/ft 10.88 lbs/ft 0.181 US gal/ft 0.166 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDML) Burst Pressure Collapse Pressure Torsional Yield Strength Connection weaker than tube in tension. Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility. New 2.875 in 2.151 in 0.362 in 2.858 in2 385,800 lbs 332,600 lbs 29,750 psi 29,720 psi 20,800 ft-lbs Premium 2.730 in 2.151 in 0.290 in 2.220 in 2 299,800 lbs 260,400 lbs 27,200 psi 25,600 psi 15,900 ft-lbs
9/1/09
27802040179103502007
2-7/8 10.40 lbs/ft S-135 with 2-7/8 HT PAC 3-3/8 OD x 1-1/2 ID Arnco 300 XT Hard Band Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Tool Joint Hard Band Nominal Weight Adjusted Weight Capacity Displacement S-135 2-7/8 HT PAC N/A IU Arnco 300 XT 10.40 lbs/ft 10.53 lbs/ft 0.183 US gal/ft 0.161 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDML) Burst Pressure Collapse Pressure Torsional Yield Strength Connection weaker than tube in tension. Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility. New 2.875 in 2.151 in 0.362 in 2.858 in2 385,800 lbs 332,600 lbs 29,750 psi 29,720 psi 20,800 ft-lbs Premium 2.730 in 2.151 in 0.290 in 2.220 in 2 299,800 lbs 260,400 lbs 27,200 psi 25,600 psi 15,900 ft-lbs
9/1/09
27802040179105502100
2-7/8 10.40 lbs/ft Internal Coating S-135 with 2-7/8 HT PAC 3-1/4 OD x 1-1/2 ID Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Internal Coating Nominal Weight Adjusted Weight Capacity Displacement S-135 2-7/8 HT PAC N/A IU TK34XT 10.40 lbs/ft 10.70 lbs/ft 0.182 US gal/ft 0.164 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDML) Burst Pressure Collapse Pressure Torsional Yield Strength New 2.875 in 2.151 in 0.362 in 2.858 in2 385,800 lbs 332,600 lbs 29,750 psi 29,720 psi 20,800 ft-lbs Premium 2.730 in 2.151 in 0.290 in 2.220 in2 299,800 lbs 260,400 lbs 28,200 psi 25,600 psi 15,900 ft-lbs
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility.
9/1/09
27802040179107502207
2-7/8 10.40 lbs/ft Internal Coated S-135 with 2-7/8 HT PAC 3-1/8 OD x 1-1/2 ID Arnco 300 XT Hard Band Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Internal Coating Tool Joint Hard Band Nominal Weight Adjusted Weight Capacity Displacement S-135 2-7/8 HT PAC N/A IU TK 34 Arnco 300 XT 10.40 lbs/ft 10.53 lbs/ft 0.183 US gal/ft 0.161 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDML) Burst Pressure Collapse Pressure Torsional Yield Strength Tube weaker than connection in tension. Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility. New 2.875 in 2.151 in 0.362 in 2.858 in2 385,800 lbs 332,600 lbs 29,750 psi 29,720 psi 20,800 ft-lbs Premium 2.730 in 2.151 in 0.290 in 2.220 in2 299,800 lbs 260,400 lbs 27,200 psi 25,600 psi 15,900 ft-lbs
9/1/09
27802010003111602000
2-7/8 10.40 lbs/ft E-75 with 2-7/8 RFO 3-7/8 OD x 2-5/32 ID Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Nominal Weight Adjusted Weight Capacity Displacement E-75 2-7/8 RFO 2-7/8 OH EU 10.40 lbs/ft 11.06 lbs/ft 0.189 US gal/ft 0.166 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDML) Burst Pressure Collapse Pressure Torsional Yield Strength New 2.875 in 2.151 in 0.362 in 2.858 in2 214,300 lbs 184,800 lbs 16,530 psi 16,510 psi 11,600 ft-lbs Premium 2.730 in 2.151 in 0.290 in 2.220 in2 166,500 lbs 144,700 lbs 15,110 psi 14,220 psi 8,900 ft-lbs
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility.
9/1/09
27802020003111602000
2-7/8 10.40 lbs/ft X-95 with 2-7/8 RFO 3-7/8 OD x 2-5/32 ID Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Nominal Weight Adjusted Weight Capacity Displacement X-95 2-7/8 RFO 2-7/8 OH EU 10.40 lbs/ft 11.06 lbs/ft 0.189 US gal/ft 0.166 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDML) Burst Pressure Collapse Pressure Torsional Yield Strength New 2.875 in 2.151 in 0.362 in 2.858 in2 271,500 lbs 234,000 lbs 20,930 psi 20,910 psi 14,600 ft-lbs Premium 2.730 in 2.151 in 0.290 in 2.220 in2 210,900 lbs 183,300 lbs 19,140 psi 18,010 psi 11,200 ft-lbs
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility.
9/1/09
27802030003111602000
2-7/8 10.40 lbs/ft G-105 with 2-7/8 RFO 3-7/8 OD x 2-5/32 ID Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Nominal Weight Adjusted Weight Capacity Displacement G-105 2-7/8 RFO 2-7/8 OH EU 10.40 lbs/ft 11.06 lbs/ft 0.189 US gal/ft 0.166 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDML) Burst Pressure Collapse Pressure Torsional Yield Strength New 2.875 in 2.151 in 0.362 in 2.858 in2 300,100 lbs 258,700 lbs 23,140 psi 23,110 psi 16,200 ft-lbs Premium 2.730 in 2.151 in 0.290 in 2.220 in2 233,100 lbs 202,600 lbs 21,150 psi 19,910 psi 12,400 ft-lbs
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility.
9/1/09
27802040003111602000
2-7/8 10.40 lbs/ft S-135 with 2-7/8 RFO 3-7/8 OD x 2-5/32 ID Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Nominal Weight Adjusted Weight Capacity Displacement S-135 2-7/8 RFO 2-7/8 OH EU 10.40 lbs/ft 11.06 lbs/ft 0.189 US gal/ft 0.166 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDML) Burst Pressure Collapse Pressure Torsional Yield Strength New 2.875 in 2.151 in 0.362 in 2.858 in2 385,800 lbs 332,600 lbs 29,750 psi 29,720 psi 20,800 ft-lbs Premium 2.730 in 2.151 in 0.290 in 2.220 in2 299,800 lbs 260,400 lbs 27,200 psi 25,600 psi 15,900 ft-lbs
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility.
9/1/09
27802040003111603000
2-7/8 10.40 lbs/ft S-135 with 2-7/8 RFO Class 2 3-7/8 OD x 2-5/32 ID Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Nominal Weight Adjusted Weight Capacity Displacement S-135 2-7/8 RFO 2-7/8 OH EU 10.40 lbs/ft 11.06 lbs/ft 0.189 US gal/ft 0.166 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDML) Burst Pressure Collapse Pressure Torsional Yield Strength New 2.875 in 2.151 in 0.362 in 2.858 in2 385,800 lbs 332,600 lbs 29,750 psi 29,720 psi 20,800 ft-lbs Class 2 2.658 in 2.151 in 0.253 in 1.914 in2 258,400 lbs 225,400 lbs 23,800 psi 23,290 psi 13,300 ft-lbs
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility.
9/1/09
27802040003141603000
2-7/8 10.40 lbs/ft S-135 with 2-7/8 RFO Class 2 3-1/2 OD x 2-5/32 ID Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Nominal Weight Adjusted Weight Capacity Displacement S-135 2-7/8 RFO 2-7/8 OH EU 10.40 lbs/ft 11.06 lbs/ft 0.189 US gal/ft 0.166 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDML) Burst Pressure Collapse Pressure Torsional Yield Strength New 2.875 in 2.151 in 0.362 in 2.858 in2 385,800 lbs 332,600 lbs 29,750 psi 29,720 psi 20,800 ft-lbs Class 2 2.658 in 2.151 in 0.253 in 1.914 in2 258,400 lbs 225,400 lbs 23,800 psi 23,290 psi 13,300 ft-lbs
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility.
9/1/09
27802040096111602000
2-7/8 10.40 lbs/ft S-135 with 2-7/8 American Open Hole 3-7/8 OD x 2-5/32 ID Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Nominal Weight Adjusted Weight Capacity Displacement S-135 2-7/8 AOH N/A EU 10.40 lbs/ft 10.98 lbs/ft 0.187 US gal/ft 0.167 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDML) Burst Pressure Collapse Pressure Torsional Yield Strength New 2.875 in 2.151 in 0.362 in 2.858 in2 385,800 lbs 332,600 lbs 29,750 psi 29,720 psi 20,800 ft-lbs Premium 2.730 in 2.151 in 0.290 in 2.220 in 2 299,800 lbs 260,400 lbs 27,200 psi 25,600 psi 15,900 ft-lbs
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility.
9/1/09
27802040323103702207
2-7/8 10.40 lbs/ft Internal Coated S-135 with Hydril Wedge Thread 23 3-3/8 OD x 1-1/2 ID Arnco 300 XT Hard Band Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Internal Coating Tool Joint Hard Band Nominal Weight Adjusted Weight Capacity Displacement S-135 Hydril WT 23 N/A IU TK 34 Arnco 300 XT 10.40 lbs/ft 10.98 lbs/ft 0.132 US gal/ft 0.116 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDML) Burst Pressure Collapse Pressure Torsional Yield Strength New 2.875 in 2.151 in 0.362 in 2.858 in2 385,800 lbs 332,600 lbs 29,750 psi 29,720 psi 20,800 ft-lbs Premium 2.730 in 2.151 in 0.290 in 2.220 in 2 299,800 lbs 260,400 lbs 27,200 psi 25,600 psi 15,900 ft-lbs
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility.
9/2/09
27802040323105702207
2-7/8 10.40 lbs/ft Internal Coated S-135 with Hydril Wedge Thread 23 3-1/8 OD x 1-1/2 ID Arnco 300 XT Hard Band Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Internal Coating Tool Joint Hard Band Nominal Weight Adjusted Weight Capacity Displacement S-135 WT 23 N/A IU TK 34 Arnco 300 XT 10.40 lbs/ft 10.98 lbs/ft 0.132 US gal/ft 0.116 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDXL) Burst Pressure Collapse Pressure Torsional Yield Strength New 2.875 in 2.151 in 0.362 in 2.858 in2 385,800 lbs 332,600 lbs 29,750 psi 29,720 psi 20,800 ft-lbs Premium 2.730 in 2.151 in 0.290 in 2.220 in2 299,800 lbs 260,400 lbs 27,200 psi 25,600 psi 15,900 ft-lbs
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility.
9/2/09
27802010026101502000
2-7/8 10.40 lbs/ft E-75 with NC 26 3-5/8 OD x 1-3/4 ID Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Nominal Weight Adjusted Weight Capacity Displacement E-75 NC 26 2-3/8 IF IU 10.40 lbs/ft 10.79 lbs/ft 0.185 US gal/ft 0.165 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDML) Burst Pressure Collapse Pressure Torsional Yield Strength New 2.875 in 2.151 in 0.362 in 2.858 in2 214,300 lbs 184,800 lbs 16,530 psi 16,510 psi 11,500 ft-lbs Premium 2.730 in 2.151 in 0.290 in 2.220 in2 166,500 lbs 144,700 lbs 15,110 psi 14,220 psi 8,900 ft-lbs
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility.
9/2/09
27802030026103502000
2-7/8 10.40 lbs/ft G-105 with NC 26 3-3/8 OD x 1-3/4 ID Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Nominal Weight Adjusted Weight Capacity Displacement G-105 NC 26 2-3/8 IF IU 10.40 lbs/ft 10.79 lbs/ft 0.185 US gal/ft 0.165 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDML) Burst Pressure Collapse Pressure Torsional Yield Strength New 2.875 in 2.151 in 0.362 in 2.858 in2 300,000 lbs 258,700 lbs 23,140 psi 23,110 psi 16,200 ft-lbs Premium 2.731 in 2.151 in 0.290 in 2.221 in2 233,100 lbs 202,600 lbs 21,150 psi 19,910 psi 12,400 ft-lbs
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility.
9/2/09
27802040026101502000
2-7/8 10.40 lbs/ft S-135 with NC 26 3-5/8 OD x 1-3/4 ID Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Nominal Weigh Adjusted Weight Capacity Displacement S-135 NC 26 2-3/8 IF IU 10.40 lbs/ft 10.79 lbs/ft 0.185 US gal/ft 0.165 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDML) Burst Pressure Collapse Pressure Torsional Yield Strength New 2.875 in 2.151 in 0.362 in 2.858 in2 385,800 lbs 332,600 lbs 29,750 psi 29,720 psi 20,800 ft-lbs Premium 2.730 in 2.151 in 0.290 in 2.220 in2 299,800 lbs 260,400 lbs 27,200 psi 25,600 psi 15,900 ft-lbs
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility.
9/2/09
27802010626103502000
2-7/8 10.40 lbs/ft E-75 with Left Hand NC 26 3-3/8 OD x 1-3/4 ID Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Nominal Weight Adjusted Weight Capacity Displacement E-75 Left Hand NC 26 Left Hand 2-3/8 IF IU 10.40 lbs/ft 10.79 lbs/ft 0.185 US gal/ft 0.165 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDML) Burst Pressure Collapse Pressure Torsional Yield Strength New 2.875 in 2.151 in 0.362 in 2.858 in2 214,300 lbs 184,800 lbs 16,530 psi 16,510 psi 11,500 ft-lbs Premium 2.730 in 2.151 in 0.290 in 2.220 in2 166,500 lbs 144,700 lbs 15,110 psi 14,220 psi 8,900 ft-lbs
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility.
9/2/09
27802040126101102000
2-7/8 10.40 lbs/ft S-135 with HT 26 3-5/8 OD x 1-1/2 ID Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Nominal Weight Adjusted Weight Capacity Displacement S-135 HT 26 N/A IU 10.40 lbs/ft 11.05 lbs/ft 0.183 US gal/ft 0.169 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDML) Burst Pressure Collapse Pressure Torsional Yield Strength New 2.875 in 2.151 in 0.362 in 2.858 in2 385,800 lbs 332,600 lbs 29,750 psi 29,720 psi 20,800 ft-lbs Premium 2.730 in 2.151 in 0.290 in 2.220 in2 299,800 lbs 260,400 lbs 27,200 psi 25,600 psi 15,900 ft-lbs
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility.
9/1/09
27802040126102902207
2-7/8 10.40 lbs/ft Internal Coated S-135 with HT 26 3-1/2 OD x 1-5/8 ID Arnco 300 XT Hard Band Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Internal Coating Tool Joint Hard Band Nominal Weight Adjusted Weight Capacity Displacement S-135 HT 26 N/A EU TK 34 Arnco 300 XT 10.40 lbs/ft 10.98 lbs/ft 0.185 US gal/ft 0.169 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDML) Burst Pressure Collapse Pressure Torsional Yield Strength New 2.875 in 2.151 in 0.362 in 2.858 in2 385,800 lbs 332,600 lbs 29,750 psi 29,720 psi 20,800 ft-lbs Premium 2.730 in 2.151 in 0.290 in 2.220 in 2 299,800 lbs 260,400 lbs 27,200 psi 25,600 psi 15,900 ft-lbs
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility.
9/1/09
27802040126102102000
2-7/8 10.40 lbs/ft S-135 with HT 26 3-1/2 OD x 1-1/2 ID Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Nominal Weight Adjusted Weight Capacity Displacement S-135 HT 26 N/A IU 10.40 lbs/ft 10.89 lbs/ft 0.183 US gal/ft 0.169 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDML) Burst Pressure Collapse Pressure Torsional Yield Strength New 2.875 in 2.151 in 0.362 in 2.858 in2 385,800 lbs 332,600 lbs 29,750 psi 29,720 psi 20,800 ft-lbs Premium 2.730 in 2.151 in 0.290 in 2.220 in2 299,800 lbs 260,400 lbs 27,200 psi 25,600 psi 15,900 ft-lbs
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility.
9/1/09
27802049126101102000
2-7/8 10.40 lbs/ft S-135 with Left Hand HT 26 3-5/8 OD x 1-1/2 ID Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Nominal Weight Adjusted Weight Capacity Displacement S-135 Left Hand HT 26 N/A IU 10.40 lbs/ft 11.05 lbs/ft 0.183 US gal/ft 0.169 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDML) Burst Pressure Collapse Pressure Torsional Yield Strength New 2.875 in 2.151 in 0.362 in 2.858 in2 385,800 lbs 332,600 lbs 29,750 psi 29,720 psi 20,800 ft-lbs Premium 2.730 in 2.151 in 0.290 in 2.220 in2 299,800 lbs 260,400 lbs 27,200 psi 25,600 psi 15,900 ft-lbs
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility.
9/1/09
27802140326103502000
2-7/8 10.40 lbs/ft VM 95 SS with Hydril Wedge Thread 26 3-3/8 OD x 1-3/4 Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Nominal Weight Adjusted Weight Capacity Displacement VM 95 - SS Hydril WT 26 N/A IU 10.40 lbs/ft 10.98 lbs/ft 0.185 US gal/ft 0.166 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDML) Burst Pressure Collapse Pressure Torsional Yield Strength New 2.875 in 2.151 in 0.362 in 2.858 in2 271,500 lbs 234,000 lbs 20,930 psi 20,910 psi 14,600 ft-lbs Premium 2.730 in 2.151 in 0.290 in 2.220 in2 210,900 lbs 183,300 lbs 19,140 psi 18,010 psi 11,200 ft-lbs
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility.
9/2/09
27802010031103902000
2-7/8 10.40 lbs/ft E-75 with NC 31 4-1/8 OD x 2-1/8 ID Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Nominal Weight Adjusted Weight Capacity Displacement E-75 NC 31 2-7/8 IF EU 10.40 lbs/ft 11.17 lbs/ft 0.189 US gal/ft 0.171 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDML) Burst Pressure Collapse Pressure Torsional Yield Strength New 2-7/8 2.151 0.362 2.858 sq in 214,300 lbs 184,800 lbs 16,530 psi 16,510 psi 11,500 ft-lbs Premium 2.730 2.151 0.290 2.220 sq in 166,500 lbs 144,700 lbs 15,110 psi 14,220 psi 8,900 ft-lbs
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility.
9/2/09
27802020031103702000
2-7/8 10.40 lbs/ft X-95 with NC 31 4-1/8 OD x 2 ID Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Nominal Weight Adjusted Weight Capacity Displacement X-95 NC 31 2-7/8 IF EU 10.40 lbs/ft 11.29 lbs/ft 0.187 US gal/ft 0.173 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDML) Burst Pressure Collapse Pressure Torsional Yield Strength New 2.875 in 2.151 in 0.362 in 2.858 in2 271,500 lbs 234,000 lbs 20,930 psi 20,910 psi 14,600 ft-lbs Premium 2.730 in 2.151 in 0.290 in 2.220 in2 210,900 lbs 183,300 lbs 19,140 psi 18,020 psi 11,200 ft-lbs
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility.
9/2/09
27802030031103702000
2-7/8 10.40 lbs/ft G-105 with NC 31 4-1/8 OD x 2 ID Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Nominal Weight Adjusted Weight Capacity Displacement G-105 NC 31 2-7/8 IF EU 10.40 lbs/ft 11.29 lbs/ft 0.187 US gal/ft 0.173 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDML) Burst Pressure Collapse Pressure Torsional Yield Strength New 2.875 in 2.151 in 0.362 in 2.858 in2 300,100 lbs 258,700 lbs 23,140 psi 23,110 psi 16,200 ft-lbs Premium 2.730 in 2.151 in 0.290 in 2.220 in2 233,100 lbs 202,600 lbs 21,150 psi 19,910 psi 12,400 ft-lbs
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility.
9/2/09
27802040031103702000
2-7/8 10.40 lbs/ft S-135 with NC 31 4-1/8 OD x 2 ID Tool Joint DRILL PIPE SPECIFICATIONS
Grade Connection Interchangeable With Upset Type Nominal Weight Adjusted Weight Capacity Displacement S-135 NC 31 2-7/8 IF EU 10.40 lbs/ft 11.29 lbs/ft 0.187 US gal/ft 0.173 US gal/ft
TUBE DATA
Outside Diameter Inside Diameter Wall Thickness Cross Sectional Area Maximum Hook Load/Tensile Strength Slip Crushing / Slip Type (SDML) Burst Pressure Collapse Pressure Torsional Yield Strength New 2.875 in 2.151 in 0.362 in 2.858 in2 385,800 lbs 332,600 lbs 29,750 psi 29,720 psi 20,800 ft-lbs Premium 2.730 in 2.151 in 0.290 in 2.220 in2 299,800 lbs 260,400 lbs 27,200 psi 25,600 psi 15,900 ft-lbs
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source. NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the users own risk and are the users responsibility.
9/2/09