1 Installation Guide ______________ 2 Scope of Delivery ______________ 3 Licenses and Licensing ______________ 4 Installation Requirements ______________ 5 Installing WinCC ______________ 6 Perform uninstall ______________ 7 Upgrading WinCC ______________ 8 ______________
Notes about Running the Software
09/2007
Safety Guidelines
Safety Guidelines
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are graded according to the degree of danger. DANGER indicates that death or severe personal injury will result if proper precautions are not taken. WARNING indicates that death or severe personal injury may result if proper precautions are not taken. CAUTION with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken. CAUTION without a safety alert symbol, indicates that property damage can result if proper precautions are not taken. NOTICE indicates that an unintended result or situation can occur if the corresponding information is not taken into account.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property damage.
Qualified Personnel
The device/system may only be set up and used in conjunction with this documentation. Commissioning and operation of a device/system may only be performed by qualified personnel. Within the context of the safety notes in this documentation qualified persons are defined as persons who are authorized to commission, ground and label devices, systems and circuits in accordance with established safety practices and standards.
Prescribed Usage
Note the following: WARNING This device may only be used for the applications described in the catalog or the technical description and only in connection with devices or components from other manufacturers which have been approved or recommended by Siemens. Correct, reliable operation of the product requires proper transport, storage, positioning and assembly as well as careful operation and maintenance.
Trademarks
All names identified by are registered trademarks of the Siemens AG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in this publication is reviewed regularly and any necessary corrections are included in subsequent editions.
Table of contents
1 2 3 4 Installation Guide ....................................................................................................................................... 5 Scope of Delivery....................................................................................................................................... 7 Licenses and Licensing ............................................................................................................................. 9 Installation Requirements ........................................................................................................................ 11 4.1 4.2 4.3 4.4 4.5 4.5.1 4.5.2 4.5.3 4.5.4 4.5.5 4.6 5 5.1 5.2 5.3 5.4 5.5 6 7 6.1 7.1 7.2 7.3 8 WinCC Installation Requirements ................................................................................................11 Hardware Requirements for the Installation ................................................................................12 Software Requirements for the Installation..................................................................................14 Notes on Data and System Security............................................................................................17 Access Rights in Operating System ............................................................................................18 Defining Access Rights in the Operating System ........................................................................18 Including users in the "SIMATIC HMI" user group.......................................................................19 Include user in the user group "SQLServer2005MSSQLUser$<COMPUTERNAME>$WINCC".................................................19 Including domain-global user group in the "SIMATIC HMI" user group.......................................20 Release existing project for "SIMATIC HMI" user group .............................................................20 How to Adapt the Windows Security Policies ..............................................................................21 Installing WinCC ..........................................................................................................................23 How to Install MS Message Queuing...........................................................................................24 How to Install Microsoft SQL Server 2005...................................................................................27 How to Install WinCC ...................................................................................................................28 How to Install Supplementary Components Later .......................................................................30 How to Perform an Uninstall ........................................................................................................31 Upgrading WinCC ........................................................................................................................33 Information on Migrating Projects ................................................................................................34 How to Perform an Upgrade Installation......................................................................................36
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
Table of contents
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
Installation Guide
Contents
This documentation contains important information on the scope of delivery, as well as on the installation and operation of WinCC. The information contained here takes precedence over the information contained in the manual and online help.
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
Installation Guide
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
Scope of Delivery
Delivered Components
WinCC V6.2 SP2 is available as a basic package and as an upgrade package. You will receive the following components:
Component DVD WinCC V6.2 SP2 Standard Package X
SQL Server 2005 Service Pack 1 for WinCC V6.2 X DVD DVD "MS ServicePacks & Tools": - Microsoft Internet Explorer 6 SP1 - Windows 2000 Service Pack 4 - Windows XP Service Pack 2 - Windows Server 2003 Service Pack 2 - Hotfix - Windows Server 2003 - Hotfix - Windows XP SP2 - Security Patch - Win2000 - MUI Patch - Windows Server 2003 SP2 - Hotfix - Microsoft SQL Server 2005 SP1 - Microsoft .Net Framework V1.1 CD SIMATIC NET 1) Storage medium with required licenses Certificate of License Installation Notes in short version (from this document) 3)
2)
X X X X
1) Please note the software requirements of the supplied SIMATIC NET version. Not all drivers are supported by Windows XP. 2)
WinCC V6.2 SP2, the License Keys for new deliveries of WinCC are shipped on USB stick and are no longer issued on the previously used license disk.
You can find detailed installation notes in the "Read first" file on your "WinCC V6.2 SP2" DVD:
3)
Double click in the WinCC Information System summary on the entry "Installation Notes". Choose any subject via . A gray menu bar will appear on the upper edge of the displayed page. Open the printable version using the entry "Tools" > "Open PDF". To do this, you will need Adobe Acrobat Reader V5.0. Adobe Acrobat Reader is available free of charge at this URL http://www.adobe.com/products/acrobat Additional PDF files for printing the online help are available in the "PrintDocuments" folder on your "WinCC V6.2 SP2" DVD.
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
Scope of Delivery
Communication driver
The following table lists the communication drivers included in the package. Additional required licenses are contained in their respective option packages.
Communication driver OPC PROFIBUS DP PROFIBUS FMS SIMATIC 505 TCPIP SIMATIC S5 Ethernet Layer 4 SIMATIC S5 Ethernet TF 1) SIMATIC S5 Profibus FDL SIMATIC S5 Programmers Port AS511 SIMATIC S5 Serial 3964R SIMATIC S7 Protocol Suite SIMATIC TI Ethernet Layer 4 SIMATIC TI Serial System Info Windows DDE
1) 2)
Communication driver is only supported on stand-alone systems under Windows 2000. The storage medium contains the WinCC licenses.
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
The WinCC software is protected and can only be used in its full measure with a valid license. Each installed software and option used requires a valid license for unrestricted operation of WinCC. You will receive a storage medium with all necessary license keys for the installation of licenses. The licenses for optional packages must be ordered separately. Licenses which are installed for use in WinCC are transferred from the storage medium to a local drive and are unregistered on the storage medium. The cumulation of more than one license per component subject to a license is possible only for archive licenses. Other licenses cannot be cumulated. Note Furthermore, the licensee confirms that the software (SW) contains licensed software by Microsoft Corporation or its subsidiaries. Thereby, licensee agrees to be bound by the terms and conditions of the appended license agreement between Microsoft SQL Server and end user, and to fulfill same.
Upgrade to WinCC V6
Following an upgrade of WinCC V5 to WinCC V6, only the V6 license is available. This license is not recognized by WinCC V5. If WinCC V5 is used as an alternative to WinCC V6, the user is authorized to create an image of WinCC V5, including its license. However, both WinCC versions may only be used as an alternative to each other. Any concurrent use of WinCC V6 and WinCC V5 represents a violation of the license agreement.
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
Demo Mode
If a license is missing for one or several components, WinCC will run in demo mode. WinCC also switches to demo mode when the maximum authorized number of process tags or archive tags is exceeded in a project. In Demo mode, you can use the WinCC software fully for a maximum of one hour. After this period, the operation of WinCC violates the license agreements. After one hour, the WinCC Explorer and the editors will be closed. In Runtime, the system will request the acquisition of a valid license. This dialog will appear every 10 minutes. Details on demo mode may be found in WinCC Information System under "Getting Started > Licensing".
Installation of Licenses
Licenses may be installed during installation of WinCC or after the fact. Connect the storage medium containing the WinCC licenses with your computer after the setup program prompts you to install the licenses. All required licenses are automatically installed. For installation of licenses after the fact, you may use the Automation License Manager. You will find the Automation License Manager in the Windows start menu in the "SIMATIC" program group. An after-the-fact installation of a license will take effect upon restart of WinCC. For the installation of licenses, the following requirements must be met: Administrator rights are required. The storage medium containing the licenses must not be write protected. For configuration purposes, RC licenses may be installed on a local drive but can also be installed on a license server. Licenses may only be installed on a non-compressed drive. Note After uninstalling WinCC, the licenses remain installed on the system.
Upgrade Installation
You must upgrade the existing authorizations if you have received WinCC as upgrade from V5.x to V6.2. The same is applicable to authorizations of communication drivers and WinCC options. The WinCC V5 licenses can then no longer be used after the upgrades. In order to use the WinCC Web Navigator under WinCC V6.2 you need Version 6.2 of the Web Navigator. Authorizations up to V6.1 used for the Web Navigator up until now can no longer be used. A corresponding upgrade is required.
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
10
Installation Requirements
4.1 WinCC Installation Requirements
4.1
Introduction
You will need special hardware and software for the installation of WinCC. The requirements are described in the chapters "Hardware Requirements for Installation" and "Software Requirements for Installation". The first check if certain conditions are met is already executed during the installation of WinCC. The following conditions are checked: Operating system User Rights Graphic Resolution Internet Explorer MS Message Queuing SQL Server Due Complete Restart (Cold Restart)
Error Messages
If one these conditions is not met, the WinCC installation will be aborted and an error message will be displayed. For details about the error messages displayed see the table below.
Error Message To execute installation properly, restart the computer Required operating system, Win XP / Win 2000 SP4 This application requires VGA or any higher resolution You do not have administrator rights. Log on as administrator. Explanation The software installed on your computer requires a restart. Before WinCC can be installed, the computer should be restarted once. Upgrade the operating system to at least Windows XP SP2 and Windows 2000 SP4, respectively. Check the settings of the connected monitor and upgrade the graphic card, if necessary. Administrator rights are required for the installation. Please log in to Windows again as a user with administrator rights.
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
11
The required SQL Server 2005 SP1 entity is not Install Microsoft SQL Server 2005 SP1 Hotfix from the DVD included in installed. the delivery. Instructions are included in Chapter "Installing Microsoft SQL Server 2005".
4.2
4.2
Introduction
Certain hardware configuration conditions must be fulfilled for installation.
Hardware Requirements
WinCC supports all common IBM/AT-compatible PC platforms. To efficiently work with WinCC, select a system with the recommended specifications. Note Server requirements are also valid for single-user systems unless specified otherwise.
Minimum CPU Client: Intel Pentium III, 600 MHz Server: Intel Pentium III; 1 GHz Central archive server: Intel Pentium 4; 2 GHz Working memory Client: 512 MB Single-user system: 512 MB / Server: 1 GB Central archive server: 1 GB
Recommended Client: Intel Pentium III; 1 GHz Server: Intel Pentium 4; 2 GHz Central archive server: Intel Pentium 4; 2.5 GHz Client: 512 MB Single-user system: 1 GB / Server: >1 GB Central archive server: >= 2 GB
12
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
1) The installation requires at least 100 MB of free memory space for additional system files on the drive on which the operating system is installed. Generally the operating system is drive "C:". 2)
Depending on project size as well as size of archives and packages. On project activating, free memory space of at least 100 MB must be available. WinCC projects should not be stored on compressed drives or directories. Use the recommended value in the area "Total size of swap file for all drives" for "Size of swap file for a specific drive". Enter the recommended value in both the "Start size" field as well as in the "Maximum size" field.
3) 4)
WinCC requires the Windows printer spooler to detect printer faults. Therefore, no other printer spooler may be installed.
5)
Note In the case of online configuration, the recommended requirements are valid as the minimum requirement.
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
13
4.3
4.3
Introduction
For the installation, certain requirements concerning operating system and software configuration must be met. NOTICE WinCC is basically approved for operation in a domain or work group. However, observe the domain-group policies and domain restrictions which could hinder the installation. In this case, remove the computer from the domain before installing Microsoft Message Queuing, Microsoft SQL Server 2005 and WinCC. Log on to the computer concerned locally with administrator rights. Carry out the installation. Following successful installation, the WinCC computer can be registered in the domain again. If the domain-group policies and domain restrictions do not impair the installation, the computer must not be removed from the domain during installation. However, please note that the domain-group policies and domain restrictions could affect operation. If these restrictions cannot be overcome, operate the WinCC computer in a work group. If necessary, contact the domain administrator.
Operating system
WinCC is only released for the operating languages German, English, French, Italian and Spanish or multilingual operating systems. The Asian version of WinCC has been released for multilingual operating systems and for operating languages of English, simplified Chinese (PR China), traditional Chinese (Taiwan), Japanese, and Korean. All servers should be operated using Windows Server 2003 Standard and Enterprise Edition. All clients in a projects must be operated using either Windows XP Professional or Windows 2000 Professional. The use of either Windows Server 2003 or Windows XP Professional results in respective restrictions which should be taken into account when selecting the operating system: The SIMATIC Ethernet TF driver is only supported by Windows 2000.
14
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
WinCC server
A WinCC server can only be operated on Windows Server 2003 Standard and Enterprise Edition or Windows Server 2003 R2.
Operating system Windows Server 2003 Windows Server 2003 R2 Configuration Server 2003 Service Pack 2 Server 2003 Service Pack 2 Comments The MUI version of Windows Server 2003 SP2 and Windows Server 2003 R2 SP2 additionally require the Microsoft MUI patch KB925148. The patch is available on the "MS Service Packs & Tools" DVD.
Note WinCC is not suitable for use in a Microsoft terminal server. You can use the Microsoft terminal server only in connection with the WinCC Web client. Please observe the information in the WinCC Web Navigator installation instructions.
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
15
16
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
4.4
4.4
Introduction
System security when using WinCC can be increased by implementing simple measures.
Disable Keys
If the key combination is disabled, the following key combinations are also disabled in runtime:
Key combination <Windows key+U> Press <Shift> five times Press <Shift right> for eight seconds <Alt left+Shift left+Num> <Alt left+Shift left+Print> Function System utility program manager Locking function Impact delay Keyboard mouse High contrast
NOTICE The functions can be configured using the Windows Control Panel. If the functions are activated in the Windows Control Panel before activating WinCC Runtime, they are no longer locked in runtime.
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
17
4.5
4.5
4.5.1
Introduction
When working with WinCC, certain folders can be enabled for access via the network. For reasons of security, this folder should only be made available to specific users.
18
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
4.5.2
Introduction
Include those local users in the "SIMATIC HMI" group whose login permits access to WinCC. You must first create local users to do so. Users of a domain may be directly included in the user group "SIMATIC HMI".
Procedure
1. Open the workstation administration under Windows. 2. Select the entry "Local Users and Groups > Users" in the navigation window . All local users are displayed in the data window. 3. Open the "New User" dialog via the context menu. Create a user account with the same login for each user who has to access WinCC. 4. Select the entry "Local Users and Groups > Groups" in the navigation window". All groups are displayed in the data window. Select the "SIMATIC HMI" group. 5. Using the pop-up menu, open the "Add Member" dialog and include those users as members of the "SIMATIC HMI" user group.
4.5.3
Introduction
To access WinCC on Microsoft SQL Server 2005 members of the user group "SIMATIC HMI" need the corresponding user rights. For this, users must be included in the user group "SQLServer2005MSSQLUser$<COMPUTERNAME>$WINCC".
Prerequisite
The local users are created; their login is used to access WinCC.
Procedure
1. Open the workstation administration under Windows. 2. Select the entry "Local Users and Groups > Users" in the navigation window . All local users are displayed in the data window.
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
19
4.5.4
Introduction
During operation of a domain, an additional domain-global user group may be created and included as a member of the "SIMATIC HMI" user group.
Requirements
The domain administrator creates a domain-global user group. Within the domain, the domain administrator includes those users in the domain whose login permits access to WinCC.
Procedure
1. Open the workstation administration under Windows. 2. In the navigation window, select the "Local Users and Groups > Users" entry. The data window displays all local users. 3. In the pop-up menu, select the "New User" dialog. Create an user account with the same login for the domain-global user group. 4. In the navigation window, select the "Local Users and Groups > Groups" entry. The data window displays all groups. Select the group "SIMATIC HMI". 5. Using the pop-up menu, open the "Add Member" dialog and include domain-global user group as members of the "SIMATIC HMI" user group.
4.5.5
Introduction
You must first remove the existing release of the project directory if the user group "SIMATIC HMI" has to access an existing user group. Then the project is released again while opening WinCC Explorer.
20
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
Procedure
1. Open the workstation administration under Windows. 2. In the navigation window, select the entry "Shared Folders > Shares". The data window displays all unlocked directories. 3. Select the respective project directory and remove the enable through the "Cancel Share" pop-up menu. 4. If you now open the project in WinCC, the project directory is automatically unlocked for the "SIMATIC HMI" user group, and all members of the user group are granted access to the project directory.
Note The enable name of the directory unlocked by WinCC must not be modified.
4.6
4.6
Introduction
Before you install WinCC, you must check the operating system settings. The system must permit the installation of unsigned drivers and files.
Procedure
1. In the Control Panel, open "Administrative Tools". 2. Double-click "Local Security Policy". 3. In the left pane, click "Local Policies". 4. In the right pane, double-click "Security Options". 5. Check the settings of the security policies below: Windows 2000: "Unsigned driver installation behavior" and "Unsigned files installation behavior (except drivers)" Windows XP / Windows Server 2003: "Devices: Unsigned driver installation behavior" For the policies, select either "Accept without warning" or "Warn, but permit installation".
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
21
22
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
Installing WinCC
5.1 Installing WinCC
5.1
Introduction
This chapter describes the installation of WinCC. MS Message Queuing and SQL Server 2005 entity "WinCC" must be installed prior to installing WinCC.
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
23
5.2
5.2
Introduction
WinCC implements the Message Queuing service from Microsoft. It is a component part of the operating system. MS Message Queuing is not a standard setting of the Windows installation and must be installed later, if necessary. The Windows installation CD is required to complete the installation. NOTICE WinCC is basically approved for operation in a domain or work group. However, observe the domain-group policies and domain restrictions which could hinder the installation. In this case, remove the computer from the domain before installing Microsoft Message Queuing, Microsoft SQL Server 2005 and WinCC. Log on to the computer concerned locally with administrator rights. Carry out the installation. Following successful installation, the WinCC computer can be registered in the domain again. If the domain-group policies and domain restrictions do not impair the installation, the computer must not be removed from the domain during installation. However, please note that the domain-group policies and domain restrictions could affect operation. If these restrictions cannot be overcome, operate the WinCC computer in a work group. If necessary, contact the domain administrator.
24
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
3. Select the "Message Queuing" component. The button "Details" will be activated. 4. Select the "Details" button. The dialog "Message Queuing" will open. 5. Activate the "Common" subcomponent. 6. Deselect all other subcomponents and acknowledge with "OK". 7. When the "Disk" dialog opens insert the requested Windows Installations CD-ROM. Select the "OK" button. MS Message Queuing will be installed. 8. Close the wizard using the "Finish" button.
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
25
3. Select the "Message Queuing" component and click the "Next" button. 4. Select the "Independent Client" MSMQ type. Click "Next". 5. Select the "Message Queuing Does Not Access the Active Directory" setting. Click "Next". 6. When the "Disk" dialog opens insert the requested Windows Installations CD-ROM. Select the "OK" button. MS Message Queuing will be installed. 7. Close the wizard using the "Finish" button.
26
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
5.3
5.3
Introduction
This chapter describes how to install Microsoft SQL Server 2005 with Service Pack 1 Hotfix. For this, use the supplied DVD.
Requirements
Administrator rights are necessary for the installation. There must be no SQL server entity with the name "WinCC", which was manually created, already installed.
Procedure
1. Start the "SQL Server 2005 Service Pack 1 Hotfix for WinCC V6.2" DVD. 2. Select the "Install SQL Server 2005" entry. Click the Next button in the "Welcome" dialog. 3. Please follow the licensing conditions in the "Software License Agreement" dialog. Click "Yes" to accept them. 4. Select the installation directory in the "Choose Destination Location" dialog. Click the "Browse..." button to change the suggested directory. Click "Next". The Add password for the sa login" is opened. 5. Choose the default password as a system administrator password for the SQL Servers or assign your own password. Your own password may be required for security reasons.
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
27
5.4
5.4
Introduction
This chapter describes how to install and run WinCC.
Requirements
You need local administrator rights to install WinCC. The chapter "Instructions for Security of Data and System" contains information about user rights required to operate WinCC. The Windows component "MS Message Queuing" services must have been installed. The security policies must be adapted under Windows. Microsoft SQL Server 2005 SP1 Hotfix with a server entity "WinCC" must be installed. During installation you will need the license number which is located on the software product certificate. WinCC has only been released for operating system languages of German, English, French, Italian, and Spanish or multilingual operating systems. WinCC has been released as the Asian version for operating system languages of English, simplified Chinese (PR China), traditional Chinese (Taiwan), Japanese, and Korean, or multilingual operating system, respectively. Note If the WinCC Setup is started without having the administrator rights or if other installation prerequisites have not been fulfilled, an error message appears. For more detailed information on error messages see "Prerequisites for the installation of WinCC".
28
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
Scope of Installation
When installing WinCC, it is possible to select between minimum installation, typical installation and user-defined installation. The memory space required for each option, however, depends on the number of languages installed and is displayed in the Status Bar. Minimum installation (approx. 280 to 520 MB): Runtime CS SIMATIC communication driver OPC-Server Typical installation (approx. 320 to 620 MB): Minimum installation All the components that are already activated in the user-defined installation
Procedure
1. Start the WinCC product DVD. 2. Select "Install SIMATIC WinCC". 3. Follow the screen prompts. If you require additional languages other than English, please install the desired languages. 4. During installation, the security settings customized for WinCC are displayed in the "SIMATIC Security Control" dialog. The firewall is installed and configured automatically. Confirm the changes by clicking "Accept" and "Exit". 5. Restart the computer to conclude the installation.
Options
To set the scope of the WinCC installation, select user-defined installation. You can also install or uninstall components and languages at a later time. During the installation, you can view a brief description of the WinCC components by clicking on the respective component. The documentation for some of the options will be available only if the concerned option package is installed.
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
29
5.5
5.5
Introduction
Once you have installed WinCC, you can later install additional languages or components.
Procedure
1. Open the operating system Start menu and select "Settings" > "Control Panel" > "Add or Remove Programs". 2. Select "SIMATIC WinCC V6.2 SP2" and click the "Change/Remove" button. The WinCC Setup program will open. 3. Select the individual components or languages that you want to install. The already installed components will be displayed. 4. Upon request, place the WinCC product DVD in the DVD drive. Once the start page of the DVD is opened via Autorun function, close the window with "Exit". 5. Follow the screen prompts.
Additional Software
Apart from the components offered during the user-defined installation of WinCC V6.2 SP2, you will find other optional software on the WinCC DVD. Select "Additional Software" on the start page of the WinCC DVD. The following software packages are offered: Configuration Tool WinCC Configuration Tool WinCC File Server Automation License Manager Global Script Example Project Installing the DXF Viewer Volo View Express 2.01 SQL Anywhere Studio 7 (shell setup only which requires inserting the WinCC V5.x CD)
See also
WinCC Installation Requirements (Page 11) How to Install WinCC (Page 28) How to Perform an Uninstall (Page 31) Licenses and Licensing (Page 9)
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
30
Perform uninstall
6.1 How to Perform an Uninstall
6.1
Introduction
On your computer, you can uninstall WinCC completely or simply remove individual components, e.g. languages or components.
Procedure
1. Open the operating system Start menu and select "Settings" > "Control Panel" > "Add or Remove Programs". 2. Select"SIMATIC WinCC V6.2 SP2" and click the button "Change/Remove". The WinCC setup program will start. 3. Select whether you wish to remove WinCC completely or simply remove individual components, e.g. languages or components. If you wish to uninstall components, you must place the WinCC product DVD in the drive. The installed components will be displayed. 4. Follow the screen prompts.
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
31
32
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
Upgrading WinCC
7.1 Upgrading WinCC
7.1
Introduction
You can upgrade to WinCC V6.2 via the upgrade installation for the following versions: WinCC V5.0 SP2 WinCC V5.1 WinCC V6.0.x Proceed as described in "Installation of WinCC" chapter. If you wish to migrate projects created with WinCC up to V5.1, please read the notes relating to project migration first. Note Restart the computer prior to commencing the update installation from WinCC V6.0.x to V6.2. If you execute an update from WinCC V6.0 or V6.0 SP1 to SP4, to WinCC V6.2 you should convert project pictures and libraries of your projects after the installation. Convert these configuration data using the Project Migrator. You may also covert pictures and libraries separately by using the pop-up menu of Graphics Designer in WinCC Explorer.
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
33
7.2
7.2
Introduction
If you upgrade a WinCC version beginning with V5.0 SP2 to WinCC V6.2, please take note of the following: CAUTION If you wish to work with a project in WinCC V6.2 which was created in WinCC V5.0 SP2 or WinCC V5.1, please read the Chapter "Migration" in the WinCC Information System prior to upgrading to WinCC V6.2.
Notes on Licensing
Licensing of WinCC starting with version 6.0 differs from its predecessor versions. New RT or CS licenses are required. If more than 512 archive tags have been configured in a project, an additional license is required for archive tags.
34
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
Windows DDE
The Windows DDE channel is included in the delivery since it is compatible to earlier WinCC versions. New connections, however, should be established using the "OPC" channel. An updated version of the Windows DDE channel is expected to be supplied with a later version of WinCC.
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
35
7.3
7.3
Introduction
Requirement
The hardware configuration on which WinCC V5.0 SP2 or V5.1 has been installed is also sufficient for installing an upgrade to WinCC V6.2. However, there should be no significant increase in data volume because otherwise the performance will get affected. If it is expected that the data volume will increase, upgrade the hardware in good time.
Upgrade Preparation
Before performing an upgrade installation of WinCC, check the existing projects with regard to special characters used in the archive names, archive tag names, trend names, trend window names, column names and table window names. You will find a table with the permitted special characters in the chapter "Working with WinCC" > "Working with Projects" > "References". It is possible that you must use Tag Logging in WinCC V5.0 SP2 or V5.1 to remove certain special characters from the names.
VBA Code
The "@GLOBAL.PDT" file in the <WinCC-Installationsverzeichnis\Templates > directory contains your global VBA extensions, for e.g. some menus. If you install WinCC V6.2, the file "@GLOBAL.PDT" is automatically renamed to "@GLOBAL.SAV" and replaced through a new file "@GLOBAL.PDT". First delete the new file "@GLOBAL.PDT" and again rename the "@GLOBAL.SAV" for accessing your VBA extensions after installing the upgrade. CAUTION When transferring archives, if they contain impermissible special characters, the Runtime archive may be lost.
36
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
Procedure
1. Prepare existing WinCC projects for migration. Check which communication drivers are used and also check the names used for impermissible characters. 2. Install WinCC V6.2 as in "Executing Installation of WinCC". WinCC V5.0 SP2 or V5.1 need not be uninstalled for this purpose. You need the storage medium which contains the licenses for WinCC V6.2. Upgraded licenses for WinCC V5 will be lost.
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
37
38
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
In order to operate WinCC without problems at optimum performance, please follow the Notes on Operation under Windows. Information on this is provided in the WinCC Information System under "Release Notes" > "Information on Operation" and "Working with Projects" > "Activate Project" > "External Applications".
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
39
40
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
Index
A
Access right, 18, 19, 20 Domain, 14 execute, 28, 34, 36 Microsoft SQL Server 2005, 27 Migration, 34 Notes on installed software, 28 Notes on migration, 34 PDF files, 7 Perform uninstall, 31 Preparing the installation, 21 Requirements, 11, 12, 14 Supplemental Installation Performed Later, 30 Upgrading an Installation, 34, 36 Installation Guide, 5 Installation Notes, 5 Installed software, 28 Internet Explorer, 14
C
Client Operating system, 14 Communication driver, 7, 14 Component, 7, 28, 30 Communication driver, 7 Delivered Component, 7
D
Demo Mode, 9 Domain, 14 Domain-global user group, 20 Domains, 14
L
License, 9 Installation, 9 License Agreement, 9 License Type, 9
E
Event display, 31 External Applications, 39
M
Microsoft Message Queuing, 24 Microsoft SQL Server 2005, 9, 27, 31 Migration, 34 MS Message Queuing, 24
F
File sharing, 18 Folder, 18 Released folders, 18
O
Operating system, 14 Access rights, 18 Prevent access, 17 Operation, 39 Domain, 14
H
Hardware Requirement, 12
I
Installation, 5, 23, 27, 28 Adapting Security Policy, 21 Component, 28, 30 Database system, 27
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
41
Index
P
PDF files, 7 Project Include in user group, 20
W R
Removal, 31 execute, 31 Requirement, 11 Hardware, 12 Operating system, 14 Software, 14 WinCC Install Microsoft SQL Server 2005, 27 Installation, 5, 11, 23 Installation Requirements, 12, 14 Limit access, 18 Perform uninstall, 31 Perform Uninstall, 28 Preparing the installation, 21 Supplemental Installation Performed Later, 30 upgrade, 33, 34 Upgrading an Installation, 34, 36 User Rights, 17 WinCC DVD, 7 WinCC DVD, 7 WinCC entity, 27 WinCC project Include in user group, 20 WinCC V5.0 SP2, 33, 34 WinCC V5.1, 33, 34 Windows, 14, 17, 18 Access rights, 18 Microsoft Message Queuing, 24 Operation under Windows, 39 Preparation the installation of WinCC, 21 Security policy, 21 Toolbar, 17 User Rights, 17, 18 Windows 2000, 14 Windows 2003 Server, 14 Windows event display, 31 Windows Server 2003, 14 Windows Server 2003 R2, 14 Windows Start Menu, 28 Windows XP, 14
S
Safety, 17, 18 Scope of Delivery, 7 Security policy, 21 Server Operating system, 14 Share, 18 SIMATIC HMI, 18, 19, 20 User group, 18 SIMATIC Security Control, 28 Software, 14 Requirement, 14 SQL database, 27 SQL Server, 27 User group, 19 SQL server entity, 27 SQLServer2005MSSQLUser, 19 SSC_Visual, 28 start menu, 28 Supplementary installation performed later, 30 execute, 30
T
Toolbar, 17
U
Upgrade Installation, 9, 34, 36 execute, 36 User group, 18 Domain-global user group, 20 Include project, 20 SIMATIC HMI, 18, 19, 20 SQLServer2005MSSQLUser, 18, 19
Installation Notes Software Installation Manual, 09/2007, Printout of the Online Help
42