Issue 03 (2008-01-30)
3-1
Context
l
When transporting or moving the equipment, components, or parts, you must prevent them from colliding with doors, walls, shelves, or other objects. When transporting or moving the equipment, components, or parts, you should not touch the uncoated metal surface of them with sweat-soaked or dirty gloves.
Procedure
Step 1 Check whether the total number of goods is in conformity with the packing list attached to the packing case. If... Then...
The total number of the goods is in conformity Go to Step 2. with the number on the packing list, The total number of the goods is not in conformity with the number on the packing list, Find out the cause and contact the Huawei local office.
Step 2 Check whether the packing case is in good condition. If... The packing case is in good condition, The packing case is severely damaged or soaked, Then... Go to Step 3. Find out the cause and contact the Huawei local office.
Step 3 Check the types and quantity of the goods with the packing list, and then perform the next step according to the checking result. If... Types and quantity of the goods are in conformity with those on the packing list, There is any short or wrong shipment or damage to the goods, Then... Sign the Packing List for confirmation together with the customer. Fill in the Cargo Problem Report and submit it.
3-2
Issue 03 (2008-01-30)
WARNING
To protect the equipment and find out the cause in the future, you need to keep the unpacked equipment and packing materials in indoor environment, take photos of the stocking environment, rusted or eroded equipment, packing case or carton, and packing materials, and then file the photos. ----End
An earth resistance tester, ESD wrist strap, a pair of ESD gloves, wire stripper, clamping pincers, a feeder cutter, a pair of crimping pliers for SMB, RJ45 connector crimping pliers, wire punchdown tool, wire cutter, a non-conductive screwdriver, safety knife, stripper for 75-ohm coaxial cables, a pair of connector crimping pliers for 75-ohm coaxial cables, a pair of multi-purpose crimping pliers
Issue 03 (2008-01-30)
3-3
Instruments
Multimeter, 500 V megaohm meter (for insulation resistance), bit error tester, and optical power meter
NOTE
The instruments must be measured and checked for acceptance before hand.
3-4
Issue 03 (2008-01-30)