upgrade version into its own installation folder. Your Aphelion product's default installation folder path is given in the following table, where 4.x.y. denotes the version number and ProductName is DEV, LAB, or SDK.
O/S INSTALLATION FOLDER DEFAULT PATH 32-bit C:\Program Files (x86)\ADCIS-AAI\Aphelion 4.x.y\<ProductName> 64-bit C:\Program Files \ADCIS-AAI\Aphelion 4.x.y\<ProductName>
System Requirements
Aphelion installation minimum system configuration: Windows XP, Vista, or 7 operating systems Windows 32-bit or 64-bit operating system Display monitor with 1024x768 resolution, 16-bit color Intel Pentium 4 processor, or equivalent 2 GB of RAM Hard drive with 250 MB of free space A network interface adapter supporting the Ethernet protocol and compatible with NetBios A Windows compatible, local or network DVD drive
Upgrade Installations
When installing Aphelion 4.x.y as an upgrade to a prior Aphelion version, to avoid possible version conflicts you must install the
Copyright ADCIS S.A. and Amerinex Applied Imaging, Inc., 2010. All rights reserved.
6b. If this is a reinstallation of the Aphelion 4 product, and if both the product version number (4.x.y) and the network adapter are the same as in the prior installation, then use the License Code (formerly named Product Serial Number or PSN) you received for the prior installation. 7. In the Choose Install Location panel, the default installation folder is specified. You may specify a different installation folder, but keep in mind the discussion above in the Upgrade Installations section. Then click the Next button to display the Choose Start Menu Folder panel. After selecting the Start Menu folder, click the Install button. 8. The Installing panel shows the installation progress. After the installation completes, click the Next button. 9. Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package and Microsoft .NET Framework 2.0 Service Pack 1 are a prerequisite for Aphelion products. If not previously installed, the Aphelion product prerequisites panel appears. Click the Next button and follow instructions on screen to install these distribution package(s) as needed. 10. Your installation of the Aphelion product is now complete. Please follow the test procedure in the next section.
must also have Microsoft Visual C# or Visual Studio installed on your computer.
Troubleshooting
If your test of the Aphelion product installation fails, please verify that the conditions described in the Before Aphelion Installation section have been met. If they have not been met, please make the needed corrections. You may also have to close all other applications and disable any security software (e.g., anti-virus). Next, reinstall the Aphelion product by 1.) uninstalling it using the Windows Control Panel applet for this purpose and 2.) carefully following the procedure given in Aphelion Installation from the DVD section. If installation is still unsuccessful, please contact our Product Support Team (see Product Support) for assistance.
Important note: If you disabled your security software earlier, please remember to re-enable it when you have completed the Aphelion product installation process. Product Support
Please send your problem reports, comments, and enhancement suggestions using the Contact Us section of the www.adcis.net website (if you received the DVD from ADCIS or one of its distributors) or the www.AmerinexImaging.com website (if you received the DVD from Amerinex Applied Imaging or one of its distributors).
Trademarks
Microsoft, Windows, Windows Vista, Visual Studio, and Visual C# are trademarks of the Microsoft Corporation; .NET Framework is a trademark of OReilly and Associates; and Aphelion is a trademark of ADCIS S.A. and Amerinex Applied Imaging, Inc. The aforementioned trademarks are either trademarks or registered trademarks and are held as noted in the United States and other countries, and said trademarks are used with permission. All Rights Reserved. All other trademarks, product names, and company names used herein are for identification purposes only and may be trademarks or registered trademarks of their respective owners.
Copyright ADCIS S.A. and Amerinex Applied Imaging, Inc., 2010. All rights reserved.
In addition, a C# source code program has been provided at <Installation Path>\Examples\dotnet\Help.Examples\Help.Examples.csproj. The executable version lets the user execute any Aphelion SDK imaging function in a demo/test environment. The source code version, a Microsoft Visual C# project, can serve as example source code that can be copied/pasted into your program. In this case, you
Copyright ADCIS S.A. and Amerinex Applied Imaging, Inc., 2010. All rights reserved.
Rev. 100521B