http://caponord.ismybike.com/content/faq-frequently-asked-questions
wiki
faq
download
polls
fora
links
NAVIGATION
Recent posts Ebay Technical Magazine Articles Recalls Downloads FAQ Fora
User login
Username: *
Password: *
Disconnect the starter relay and check with an ohmmeter (voltmeter) to see if there is a resistance between the terminals. If there is no resistance then the contacts are open again. Connect it back and should be ok, but replace it as soon as possible as it may happen again. If there is some resistance (a few ohms), then you cannot use it! Can I change my temperature display from F to C? No, as far as we know because it is set on the factory. What are the options for automatic chain oilers? The options available are: Scottoiler. Website here, and installation instructions here Pro-oiler. Website here What are the options for headlight protection? There is the official Aprilia headlight protection, and there is a headlight cover protection from Skidmarx. What are the options for radiator protection? There is the Touratech option, the Mike's Grill option, and quite a few people are using a DIY option. Resetting the SERVICE indicator
Remove the seat On the left hand side (as you face the bars) near the battery you will find two connectors, male and female. The female connector has two grey wires and the male has a blue/green wire. Connecting these two together puts the onboard computer into diagnostic mode. Connect these together, noting their original position for later. Turn on the ignition but don't start the engine. On the right hand instrument panel, "EF1" will now display above the MODE button. Press and hold the MODE button.
1 de 3
15/05/2012 20:24
http://caponord.ismybike.com/content/faq-frequently-asked-questions
While still pressing the MODE button, press and hold the SET button. Keep both buttons pressed until the "SERVICE" indicator disappears (seems like a long time, 10+seconds). Turn off the ignition. Disconnect the diagnostic connectors and place them in their original position (second step). Turn ignition back on to verify "SERVICE" indicator is out and panel displays normally. Replace seat.
EBAY
ZD4 PS C0 0 # Y 0 000000 1 2 3 4 5 6 7 8
coil problems? Yes with coil 1 25% Yes with coil 2 0% Yes with coil 3 0% Yes with coil 4 0% None 75%
1) Manufacturer's identification alphanumeric code. 2) Vehicle type. 3) Model. 4) Country for which the vehicle is intented. 5) # = Check digit number. 6) Model year. 7) Assembly factory designation (N=NOALE-VE, S=SCORZE-VE, 0=NOT SPECIFIED). 8) Sequential serial number. Technical Data Total votes: 8
Standard SPARK PLUGS Alternative Spark plug gap Resistance Battery ELECTRIC SYSTEM Main fuses
Older polls
Useful downloads Parts catalogue 2001 (pdf 3.7MB) Workshop manual 2004 English (pdf 16MB) Rally Raid Manual update English (pdf 850KB) Official Aprilia accessories list English (pdf 3.1MB) Official Aprilia clothing English (pdf 1.2MB) Heated Grips and Hazzard Lights installation instructions (pdf 2.0MB) ... more downloads here
TYRES
Front Rear
2 de 3
15/05/2012 20:24
http://caponord.ismybike.com/content/faq-frequently-asked-questions
Created by mach7x
3 de 3
15/05/2012 20:24