www.tesabs.ch
www.tesabs.ch
Browse our general catalogue on-line on www.swissinstruments.com Ask for your own hardcopy or CD on our website www.swissinstruments.com/contact.html
Index
Calipers External micrometers Internal micrometers Dial test indicators and supports Dial gauges and supports Bore gauges Gauge blocks Electronic indicators Electronic equipment Instruments for large dimensions Height gauges Surface roughness testers TESA-REflEx Concept TESA-vISIo TESA-SCAn mICRo-HITE 3D TESASTAR 2-5 6-9 10-11 12-13 14-15 16 17 18 19 20-21 22-23 24 25 26-27 28-29 30-31 32
TESA Design SWISS mADE TESA Design Product from the European Community TESA Design Product produced outside Europe Product from the European Community Product produced outside Europe
SCS calibration certificate other calibration certificate Inspection report Inspection report with a declaration of conformity Declaration of conformity
www.tesabs.ch
CAlIPERS
Vernier Calipers
00510041
00530110
B
2 C
2 C
Order number 00510041 00510047 00530103 00530104 00530105 00530110 00530111 00530112
measuring range mm / in 0 150 / 0 150 / 0 150 / 0 6 0 200 / 0 8 0 300 / 0 12 0 150 / 0 6 0 200 / 0 8 0 300 / 0 12
vernier reading mm / in 0,02 / 0,05 / 0,05 / 1/128 0,05 / 1/128 0,05 / 1/128 0,02 / 0.001 0,02 / 0.001 0,02 / 0.001
Dimensions, mm A B C 40 15,5 1,5 40 15,5 1,5 40 15,5 1,5 50 18 1,5 x 2 64 22 40 15,5 1,5 50 18 1,5 x 2 64 22
Dial Calipers
Robustness High accuracy Patented shockproof design Ideal for use in the workshop Easy reading Slider with metal dial housing.
00510008
1.5x1.9 1.5x1.9
3.7
15.5
3.7
3.2 A
3.6
mm per revolution 2 2 2 1
15.5
www.tesabs.ch
CAlIPERS
00510621
00510509
a b
Order number
B
measuring range mm / in
vernier reading mm / in 0,02 / 0,05 / 0,02 / 0,02 / 0.001 0,05 / 0,02 / 0,02 / 0,02 / 0,02 /
B 5 5 5 5 5 5 10 10 10
Without fine adjust device 00510509* 0 200 / 00510506 0 200 / 00510521 0 300 / 00530521 0 300 / 0 12 00510522 0 300 / With fine adjust device 0 300 / 00510621 00510641 0 500 / 0 600 / 00510651 00510671 0 1000 / * Provided with a flexible rule, 200 mm long.
Depth Calipers
00510143
Dimensions, mm A B 100 7,5 100 7,5 100 7,5 100 7,5 100 8,5 150 8,5
C 3 3 3 3 4 4
D 8 8 8 8 12 12
A D B
www.tesabs.ch
CAlIPERS
TESA SHOP-CAL
With patented TESA capa system Resolution to 0,01 mm / 0.0005 in ABSOLUTE or DIFFERENTIAL measurements High-quality precision mechanics Large LCD display Easy to use Excellent Price/Quality ratio.
00530091
3.2
NEW
1.5 15.5
13
Thumb roller
With patented TESA magna system Resolution to 0,01 mm / 0.0005 in Highest degree of protection ever achieved for this type of hand-held tools Totally immune to the penetration of liquids and other particles. Magnetic measuring system, a TESA technology guaranteeing full dependability and accuracy, even in the thoughest conditions of use SWISS MADE.
00530300
13
3.2
3,6
1.5
6 1,7
6 1,7
15,5
Thumb roller
RS232
3,6
15.5
6 1,7
www.tesabs.ch
15,5
15,5
CAlIPERS
00530223
A
Models with rounded measuring faces and knife-edged jaws for internal resp. external dimensions
00530233
Knife-edged jaws
C 30 37 60
Model with rounded measuring faces and knife-edged jaws for internal dimensions
Dimensions, mm A B C 5 80 54
00530243
www.tesabs.ch
ExTERnAl mICRomETERS
ETALON Basic
00119046
measuring range mm 0 25
Micrometer stand
Fits on measuring inserts with a 6,5 mm diameter Used to measure tubing wall thickness, concave workpieces and the like.
www.tesabs.ch
ExTERnAl mICRomETERS
Analogue indication of the full millimetres, hundredths and fractions of hundredths Error-free reading to 0,1 mm on the counter Parallax-free reading to 0,001 mm on vernier.
mm 0,01 mm
10
80 70
00310001
0,001 mm 0,1 mm
ETALON 260
Reversing the knurled sleeve renders the friction drive built into the thimble inactive.
071115887
Order number 071115887 071115888 071115889 071115890 071115891 071115892 071115893 071115894
measuring range mm 0 25 25 50 50 75 75 100 100 125 125 150 150 175 175 200
Scale interval mm 0,002 0,002 0,002 0,002 0,01 0,01 0,01 0,01
Parallelism error m 2 2 3 3 3 3 4 4
Used for measuring threads according to the three-wire method. The flank diameter can either be determined arithmetically or with the aid of relevant tables based on the measured actual size Suited for any standard external micrometer with measuring faces having a 6,5 mm diameter.
Order number 00240700 Wire diameters mm 0,17 3,20
www.tesabs.ch
ExTERnAl mICRomETERS
06030010
30 mm measuring span
Order number
Range of indication mm in 0 30 0 30 23 53 48 78 74 104 0 30 23 53 48 78 74 104 98 127 123 152 149 178 174 203 0 1.2 0 1.2 0.9 2.1 1.9 3.1 2.9 4.1 0 1.2 0.9 2.1 1.9 3.1 2.9 4.1 3.9 5.1 4.9 6.1 5.9 7.1 3.9 8.1
Protection RS232 degree IP40 IP54 IP54 IP54 IP54 IP54 IP54 IP54 IP54 IP54 IP54 IP54 IP54
MICROMASTER EASY 0 30 06030010 MICROMASTER IP54 0 30 06030020 25 50 06030021 50 75 06030022 75 100 06030023 MICROMASTER IP54 RS 0 30 06030030 06030031 25 50 06030032 50 75 06030033 75 100 06030071 100 125 06030072 125 150 06030073 150 175 06030074 175 200
Measures grooves, feather grooves, splines and other difficult to reach locations Small measuring faces specially made to check small mechanical parts.
www.tesabs.ch
ExTERnAl mICRomETERS
06030087
00440002
Order measuring range mm / in number TESA MICROMASTER with prismatic measuring faces 1 7 / 0.04 0.27 06030087 5 20 / 0.20 0.80 06030088 06030089 20 35 / 0.80 1.38 06030090 35 50 / 1.38 1.97 06030091 50 65 / 1.97 2.56 06030092 65 80 / 2.56 3.15
Order Diameter Parallelism number mm error, mm Cylindrical setting standards 5 0,5 00440001 00440002 20 0,7 00440003 25 0,7 00440004 35 1 00440005 45 1,2 00440006 50 1,2 00440007 65 1,5
Commonly used for checking any displacement on special fixtures, sliding tables, microscopes and other machines or equipment. Without spindle lock.
145
measuring range mm 0 30
Non-rotating measuring rod. Set of 6 measuring rods with a 30 mm step length also available.
www.tesabs.ch
10
InTERnAl mICRomETERS
Order number 00813410 00813411 00813412 00813413 00810001 00810002 00810003 00810801 00810802 00810803 00811501 00811502 00811503 00811504 00812301 00812302 00812303 00812304 00812305 00812306
measuring range Scale interval mm mm 3,5 4 4 4,5 4,5 5,5 5,5 6,5 68 8 10 10 12 11 14 14 17 17 20 20 25 25 30 30 35 35 40 40 50 50 60 60 70 70 80 80 90 90 100 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,005 0,005 0,005 0,005 0,005 0,005 0,005 0,005 0,005 0,005 0,005 0,005 0,005
max. perm. error/ Repeatability limit, m 4/4 4/4 4/4 4/4 4/4 4/4 4/4 4/4 4/4 4/4 4/4 4/4 4/4 4/4 4/4 5/5 5/5 5/5 5/5 5/5
00810000 6 12
8 10 11 17 25 35
100
00810800 11 20
150
00811500 20 40
00812300
150
00812300 40 100
50 70 90
150
www.tesabs.ch
InTERnAl mICRomETERS
11
Order number 06130101 06130102 06130103 06130104 06130105 06130106 06130107 06130108 06130109 06130110 06130111 06130112 06130113 06130114 06130115 06130116 06130117 06130118 06130119 06130120
measuring range mm in 3,5 4 4 4,5 4,5 5,5 5,5 6,5 68 8 10 10 12 11 14 14 17 17 20 20 25 25 30 30 35 35 40 40 50 50 60 60 70 70 80 80 90 90 100 0.1377 0.1574 0.1574 0.1771 0.1771 0.2165 0.2165 0.2559 0.2362 0.3150 0.3150 0.3970 0.3970 0.4724 0.4330 0.5512 0.5512 0.6693 0.6693 0.7874 0.7874 0.9843 0.9843 1.1811 1.1811 1.3780 1.3780 1.5748 1.5748 1.9685 1.9685 2.3622 2.3622 2.7560 2.7560 3.1496 1.1496 3.5433 3.5433 3.9370
max. perm. error / Repeatability limit, m 4/4 4/4 4/4 4/4 4/4 4/4 4/4 4/4 4/4 4/4 4/4 4/4 4/4 4/4 4/4 5/5 5/5 5/5 5/5 5/5
06130113
06130221 6 12
8 10 11 17 25 35
100
06130222 11 20
150
06130223 20 40
150
06130224
06130224 40 100
50 70 90
150
www.tesabs.ch
12
D I A l T E S T I n D I C AT o R S A n D S u P P o R T S
Dial diameter mm 28 38 28 38 28 38
01811000
Measuring Inserts
01860201 01860202
01860302
Ball tip
01630003
www.tesabs.ch
D I A l T E S T I n D I C AT o R S A n D S u P P o R T S
13
1.5
Inductive measuring system, patented. Selectable scale intervals on analogue display: 10, 20, 50 m/1, 2, 5 m. Water and coolant resistant (IP65). Displayed modes (NOR/MIN/MAX/MAX-MIN). RS232 data output
42.5
1.5
12.5 36.5
58.3
66.3
Long range up to 3 mm. Two-way measuring. No reversing lever. Continuous two-way clockwise rotation of the pointer. Swivelling probe through 180 (see in the instruction manual).
213
L1
48.91
27
40
Dial diameter mm 27 40 40
Stylus l1 in mm 18 18 36
Ideal for dial test indicators and dial gauges with dial diameter up to 40 mm. With two rigid joints and fine adjustment.
www.tesabs.ch
14
20,5 7
6.5
14.5
6.5
14.5
6.5
14.5
10
10
10
01419047
353
29
01410010
29
365S
29 40
40
40
37
37
(77.4)
(77.4)
37
40 8 h6 4
3
37
37
48.4
48.4
8 h6 4 6
8 h6 4 6
4 6
48.4
12
8 h6
48
37
measuring span mm 5 5
Shock proof
Dial lock
Model protected against the penetration of liquids 353E 0,01 5 High-precision model 01410010 0,001 1 0,08
Magnetic Supports
Highly rigid arms and articulations.
01639017
01639022
01639035
fine adjustment
www.tesabs.ch
(77.4)
74,5
15
15.7
7,5 7,5 13
15.7
10
10
22,5 7,5
43
57.5 58
7,5 58 52
58
53
(108)
105
(105)
58
(142.5)
53 50
50
8 h6
16,5
22
33
5 M 2,5 - 6H 15
0141760501
69
8 h6
8 h6 4
01419048
4.5 6
3
62
01412511
6
3
85
532E
18
measuring span mm 10 10 30 10
Shock proof
Circular scale 0 5 10 0 50 100 0 50 100 0 50 100 0 50 100 0 50 100 0 100 200 0 50 100
Dial lock
Model protected against the penetration of liquids 532E 0,01 10 High-precision models 01412511 0,001 01412611 0,001 1 5
Accuracy Maximum permissible error: in one measuring direction throughout the measuring range, Ge over any local range including any 10 scale divisions, Gt in both measuring directions throughout the measuring range, Gges Repeatability limit, Fw Max. Hysteresis, Fu
R31
01419052
4 6
www.tesabs.ch
18
8 h6
72,5
108
16
BoRE GAuGES
Bore gauges with two-point contact made to measure holes and form errors Self-centring into the bore Can equally be used with a dial gauge, precision indicator or electronic probe having a 8 h6 clamping shank diameter.
05710092
INTERAPID IRA 2
Practical instrument for comparative measurement Performs 2- or 3-point measurements, depending on used accessory Suitable for through holes, blind bores, grooves or undercuts as well as for internal measurement on workpieces with plan parallel surfaces.
~ 65
Z
20
Wide application range from 10 up to 150 mm. Easy handling thanks to its convenient design and light weight. Built-in indicator to 0,01 mm with fine setting. Centring device for two-point measurement.
10
15
Z (2:1)
Z
2.5 max.
20
15
M 2.3
10
~ 65
10 - 150 mm
0 INTERAPID
SWITZERLAND
10
Z (2:1)
consisting of: 3 Steel inserts, hardened 3 Short steel inserts, hardened 3 Long steel inserts, hardened 2 Adjustable arms for bores 6 mm 1 Small insert holder for 3-point measurement 1 Large insert holder for 3-point measurement 1 Centring device for bores from 15 to 30 mm 1 Centring device for bores from 30 to 150 mm 1 Special screwdriver.
20
15
M 2.3
20
10
10 - 150 mm
0 INTERAPID
SWITZERLAND
3.5
www.tesabs.ch
GAuGE BloCKS
17
0651515021
Order number Steel 32-Piece Set M32 0651516027 0651515027 0651511027 0651512028 47-Piece Set M47 0651516021 0651515021 0651511021 0651512021 88-Piece Set M88 0651516014 0651515014 0651511014 0651512014
Accuracy grades K 0 1 2
Set compositions mm 1,005 1,01 1,09 1,1 1,9 1,0 9,0 10, 20, 30, 60 1,005 1,01 1,09 1,1 1,9 1,0 24,0 25 100 1,0005 1,001 1,009 1,01 1,49 0,5 9,5 10 100 1,0005 1,001 1,009 1,01 1,49 0,5 24,5 25 100 1,0005 1,001 1,009 1,01 1,49 1,6 1,9 0,5 24,5 30 100 25, 75
Steps mm
K 0 1 2
K 0 1 2
112-Piece Set M112 0651516012 0651526012 0651515012 0651525012 0651511012 0651521012 0651512012 0651522012 122-Piece Set M122 0651516011 0651526011 0651515011 0651525011 0651511011 0651521011 0651512011 0651522011
K 0 1 2
K 0 1 2
www.tesabs.ch
18
E l E C T R o n I C I n D I C AT o R S
LCD display with both analogue and digital indication. Mechanical tolerance marks. Dimensions as per DIN standard 878.
01930230 7 7 01930241 01930258
7 7
53,1 53,1
18,4 18,4
88 h6 h6 44
68,4 68,4
TESA DIGICO 205 and 305 Main functions: ON/Auto OFF Data output Counting sense reversal Lockable function keys.
57,1 57,1
TESA DIGICO 400 and 500 ABS and REL modes Both display and keypad can be rotated through 270. Additional functions: PRESET mode Tolerance mode Full RESET.
TESA DIGICO 705 For bore gauges with 2-point contact. Allows for zero-setting of the indicator to lowest value of the setting ring. Value storage Max, Min, MaxMin (TIR).
121,5 121,5
28,5 28,5
134,4 134,4
2727
Designation DIGICO 205 MI DIGICO 305 MI DIGICO 305 MIE DIGICO 410 MI DIGICO 505 MI DIGICO 510 MI DIGICO 705 MI
measuring span mm / in 12,5 / 0.5 12,5 / 0.5 12,5 / 0.5 25 / 1 12,5 / 0.5 25 / 1 12,5 / 0.5
numerical interval mm / in 0,01 / 0.0005 0,001 / 0.00005 0,001 / 0.00005 0,01 / 0.0005 0,001 / 0.00005 0,001 / 0.00005 0,001 / 0.00005
Repeatability limit m 10 2 2 10 2 2 2
www.tesabs.ch
ElECTRonIC EquIPmEnT
19
03210904
NEW
03210924
03210802 05030010
Designation GT 21 GT 22 GT 61 GT 62 GT 31
NEW
05030012
NEW
05030500
The wireless probes are made for use in any installation that can not accommodate the cable of a common probe. Due to their autonomy and their robust construction, they are able to operate in the most hostile environment.
Order number 03230500* 03230501* 03230502* 03230503* 04760069 05030012 Plunger measuring range max. perm. error Repeatability mm m m retraction GTL21 W 2 0,4 + 0,6 L < 0,1 manual 0,4 + 0,6 L < 0,1 pneumatic GTL212 W 1,5 0,8 + 0,6 L < 0,24 manual GT61 W 5 0,8 + 0,6 L < 0,24 pneumatic GT612 W 5 Charger for W-probes Supplied with EU or US connector TWIN Station (receiver with 8 probe inputs), including USB cable (1,80 m long) Designation
USB Probes
Fitted with a USB interface, these TESA probes can be directly connected to the PC. The use of a USB multiplexer provides Users with a flexible and cost-effective solution. In addition, each probe offers a precision that remains unchanged wherever zero-setting has occured.
Order number 03230200 03230201 03230202 03230204 Designation GTL 21 USB GTL 22 USB GTL 222 USB GT 61 USB measuring range, mm 2 2 1,5 5 max. perm. error m 0,4 + 0,6 L 0,4 + 0,6 L 0,4 + 0,6 L 0,8 + 0,6 L
NEW
03230200
www.tesabs.ch
20
Specially designed to measure very large internal and external dimensions, this universal measuring instrument offers multiple possibilities of use.
01110300
Order Application range number mm TESA UNIMASTER full set 01110000 Internal dimensions 250 1475 External dimensions 225 1450 consisting of: 1 Measuring element for internal dimensions 250275 mm or external dimensions 225 250 mm 1 Pair of measuring bolts for internal measuring 1 Pair of measuring bolts for internal/external measuring, L=75 mm 1 Pair of measuring bolts for external measuring, L = 100 mm 1 Setting standard for internal or external dimensions up to 250 mm or 225 mm, resp. Extensions of 25, 50, 75, 100, 125, 150, 300, 450 and 600 mm 1 Special screwdriver for extensions 1 Set of suspension accessories (4 brackets along with 4 clamps) 1 Wooden case for complete set Additional optional accessories.
01110000
Micrometers with two-point contact Increased measuring range through extensions with built-in cylindrical standards Screw type system for quick assembly.
072109107
Complete sets with order number Application range in mm consisting of: Order number Designation 072103576 072103585 072105462 072109030 072103586 072109055 072109066 072109089 Micrometer element Extension Extension Extension Extension Extension Extension Extension measuring range, mm 50 65 Dimensions mm 15 30 60 120 240 480 500 max. perm. error, m 3 1,5 1,5 2 2 3 3,5 3,5
072109101 072109107 072109108 072109117 072109128 50 170 50 290 50 530 50 1010 50 1510
www.tesabs.ch
21
Interapid Light
Metric/Inch conversion Hold function for displayed value Uni/Bidirectional OPTO-RS data transmission Two adjustable origin points (Ref I / Ref II) PRESET function MIN/MAX mode Two limit values for classification purposes Resolution 0,01 mm / 0.0005 in.
00590062
Repeatability limit, m 20 20 20 20 30 30 40
Total length fixed movable jaw jaw 618 918 1306 1806 2306 2806 3306
models 300 and 600 mm with a fixed jaw on the left side, or movable on any other model.
Order number 06030047 06030048 06030049 06030050 06030051 06030052 06030053 06030054 06030055 06030056
Application range mm 0 100 100 200 200 300 300 400 400 500 500 600 600 700 700 800 800 900 900 1000
Application range in 0 3.94 3.94 7.87 7.87 11.81 11.81 15.75 15.75 19.69 19.69 23.62 23.62 27.56 27.56 31.50 31.50 35.43 35.43 39.37
ETALON Height and Scribing Gauges with numerical indication to 0,01 mm / 0.0005 in
07739001
measuring range, in 0 12 0 24 0 40
www.tesabs.ch
22
HEIGHT GAuGES
00730047 00730059
00730043 00730044
00730045 00730046
Designation TESA-HITE 400 TESA-HITE 700 TESA-HITE plus M 400 TESA-HITE plus M 700 TESA-HITE magna 400 TESA-HITE magna 700
max. permissible error m / in (l in m / in) 2,5 + 4 L / 0.0001+0.000004 L 2,5 + 4 L / 0.0001+0.000004 L 2,5 + 3 L / 0.0001+0.000003 L 2,5 + 3 L / 0.0001+0.000003 L < 8 / < 0.0003 < 8 / < 0.0003
Repeatability (2) m / in < 2 / < 0.0001 < 2 / < 0.0001 < 1 / < 0.00005 < 1 / < 0.00005 < 3 / < 0.00015 < 3 / < 0.00015
www.tesabs.ch
HEIGHT GAuGES
23
Description TESA POWER PANEL plus M with printer TESA POWER PANEL plus M without printer TESA POWER PANEL for manual TESA MICRO-HITE
00760220
00730063
00730064
00730065
00760163
Designation TESA MICRO-HITE 350 TESA MICRO-HITE 600 TESA MICRO-HITE 900 TESA MICRO-HITE plus M 350 TESA MICRO-HITE plus M 600 TESA MICRO-HITE plus M 900
max. permissible error m / in (l in m / in) 2 + 3 L / 0.0001+0.000003 L 2 + 3 L / 0.0001+0.000003 L 2 + 3 L / 0.0001+0.000003 L 2 + 1,5 L / 0.0001+0.0000015 L 2 + 1,5 L / 0.0001+0.0000015 L 2 + 1,5 L / 0.0001+0.0000015 L
Repeatability (2) m / in 1 / < 0.00005 1 / < 0.00005 1 / < 0.00005 0,5 / < 0.000025 0,5 / < 0.000025 0,5 / < 0.000025
www.tesabs.ch
24
S u R fA C E R o u G H n E S S T E S T E R S
Portable, compact and robust roughness testers used in the production area as for receiving inspection.
06930013
06930011
Roughness parameters 15 33
Probe rotation 90
Built-in memory
Delivered with a SB10 regular probe, roughness standard, adapter for regular probe, battery charger and battery.
Universal inclinometer compactly sized for direct or comparative measurement Measuring range of 45 with a clear indication of the angle or the slope Reinforced housing made from anodized aluminium Large LCD display for error-free readout.
Dimensions mm 100 x 75 x 35
Supplied with ClinoSofT as well as uSB cable for connecting the inclinometer to the PC.
Dimensions mm 200 x 40 x 42
measuring range 4 x 90
Scale interval 5
www.tesabs.ch
TESA-REflEx
25
www.tesabs.ch
26
TESA-viSio
Although the TESA-VISIO 200 GL is built for the production area, its small size makes it no less suited for use on the shop floor as in the laboratory. Fitted with a colour CCD-camera along with a high-precision XY-coordinate table, also compatible with various illumination and magnification systems, this machine can easily be installed in demanding industry; for example, microelectronics, micromechanics and the watchmaking industry. When used in conjunction with TESA-REFLEX Vista, the machine proves to be powerful and dependable for part inspection and analysis.
TESA-Vista is a software module installed on any manual TESA-VISIO. This software provides the operator with the needed help functions, especially edge detection and light sources monitoring. The measurements are, therefore, taken in the optimum conditions. This latest evolution adds the option of visual comparison between the part and its CAD model. All operators accustomed to the overlays used on profile projectors will appreciate this new option.
Zoom manual, indexable motorised, 6,5x motorised, 6,5x motorised, 12x motorised, 6,5x motorised, 12x
Ringlight 4 x 90 4 x 90 4 x 90 + 8 x 45 4 x 90 + 8 x 45 4 x 90 + 8 x 45 4 x 90 + 8 x 45
MPE x,y m (l in mm) 2 + 10L / 1000 2 + 10L / 1000 2 + 4L / 1000 2 + 4L / 1000 1,6 + 4L / 1000 1,6 + 4L / 1000
www.tesabs.ch
TESA-viSio
27
Featuring the same construction as the 200 GL machine version, the TESA-VISIO 300 GL offers extensive light sources and magnifications in addition to a 300 x 200 mm measuring span. This machine is available either in manual or DCC version and runs TESA-REFLEX Vista or TESA-REFLEX Vision, respectively. The DCC version will check part series automatically, while still remaining simple to use, simplicity being the very cornerstone of the TESA-REFLEX principle.
TESA-REFLEX Vision is installed on every TESA-VISIO DCC i.e. the motorised machine version of TESA-VISIO 300. In keeping with the TESA-REFLEX principle, this software is very simple to use, whilst assisting the operator throughout the programming process through to the final capture of the measurements. This results in combining TESA-REFLEX Vision with the top-of-the-range TESA-VISIO 300 DCC, an extremely precise and effective vision machine for checking series of parts.
MPE xy m (l in mm) 2,9 + 10L / 1000 2,9 + 10L / 1000 2,5 + 4L / 1000 2,5 + 4L / 1000 2 + 4L / 1000 2 + 4L / 1000
MPE z m (l in mm) 2,9 + 10L / 1000 2,9 + 10L / 1000 2,9 + 5L / 1000 2,9 + 5L / 1000 2,9 + 5L / 1000 2,9 + 5L / 1000
Measuring volume mm 200 x 100 x 150 200 x 100 x 150 300 x 200 x 150 300 x 200 x 150 300 x 200 x 150 300 x 200 x 150
overall machine dimensions, mm 750 x 700 x 900 750 x 700 x 900 1000 x 1200 x 900 1000 x 1200 x 900 950 x 1100 x 900 950 x 1100 x 900
Joystick
www.tesabs.ch
28
TESA-ScAn
TESA-SCAN 52 Reflex-Click
This machine, like all machines produced under the TESA-SCAn name, is initially intended as an optical system that can provide users with accurate static and dynamic features when measuring turned parts in record time. But the most spectacular innovation in the machine lies in its capability to recognise a previously programmed part. Simply pressing a button causes the machine to scan the part to be measured. If the part geometry matches an existing program, the complete results are delivered in comparison with preset nominal values. Where no preset nominal values are available, the TESA-REFLEX Scan software provides the measurement results obtained from the various dimensions that could be detected. In many cases, this is enough for sample inspection. These two functions unique to date and specific to the TESA-REFLEX principle make the TESA-SCAn 52 REFLEX-Click an incomparably user-friendly and effective inspection tool for the workshop.
This module is based on experience acquired in the measurement of turned parts applied to the TESA-SCAn 52 REFLEXClick, a completely innovative piece of equipment. True to the TESA-REFLEX principle, the software will not only just measure components without the need for any preliminary programming, but also automatically recognize a part previously measured by checking it against the programmes stored in the memory. TESA-REFLEX Scan makes TESA-SCAn 52 a general-purpose machine unequalled to date, being both a true self-service platform for measuring one-off parts, and a device for inspecting large parts series.
Headstock
www.tesabs.ch
TESA-ScAn
29
44
56 55 MK2
MK1
Drawings
TL01-0027
92
Pair of external jaws Pair of external jaws Pair of external jaws Pair of external jaws Pair of external jaws Pair of external jaws Pair of external jaws Male drive centre, 40 mm dia., with a Morse 2 taper shank Rotation centre, Morse 2
T
D
MK2
38
88
MK2
TL02-0017
29
18
22
17
68
TL02-0018
Rotation centre wth a B12 taper male centre and Morse 2 taper shank Female centre with a B12 taper, 30 mm dia. Requires TL02-0018
MK2
Z178-0941
www.tesabs.ch
30
TESA-MicRo-HiTE
Featuring a modern yet well-proven design, each MH3D is made from high-grade materials and components ensuring their long-term dependability. Available in the standard version or with fine adjust device, the MH3D is ideally suited for the workshop or the production area. Whether replacing or complementing usual manual toolings for part inspection, this machine can well be used as multiuser spots, when it is a question of proving the dimensional compliance of one-off parts or small part series.
Installed on all manual CMMs from TESA for many years, TESA-REFLEX MH3D has thousands of users all over the world. This software includes help functions, such as the automatic recognition of geometrical forms and shapes, that makes it easily accessible to any operator through quick handling. Although learned in a few hours only, it remains a safe bet besides a pledge of reliability. Based on the Windows EC technology, the intuitive users interface available from the REFLEX panel is more reader-friendly for higher user-friendliness.
Order number 03939040 03939240 03939042 03939242 03939041 03939241 03939043 03939243 03939120 03939122 03939169
TESA MH3D machine type 454 474 F 454 F 474 i 454 i 474 Fi 454 Fi 474 RC 454 RC 474 Recorder 454
TESA-REflEx control panel MH3D MH3D MH3D MH3D MH3D MH3D MH3D MH3D MH3D MH3D Recorder
Machine displacements manual manual manual manual manual manual manual manual manual / motorised manual / motorised manual / motorised / automated
Measuring head TESASTAR TESASTAR TESASTAR TESASTAR TESASTAR-i TESASTAR-i TESASTAR-i TESASTAR-i TESASTAR-i TESASTAR-i TESASTAR-i
www.tesabs.ch
TESA-MicRo-HiTE
31
The latest MH3D Recorder opens up a new path in the field of tactile three-axis measurement. This hybrid machine version makes it possible to take all measurements in both manual and automatic modes. This innovation is the solution to the problematic demands of parts inspection, from the single part to the small series. Due to its capability to automatically reproduce a part program generated either manually or using a joystick, this machine definitely makes automatic measurement accessible to everyone. Since no preliminary programming is required, reproducing a part program previously saved in the memory and have a part series be checked in the same conditions is easy.
The TESA-REFLEX Recorder module has all the functions of the software provided with the manual machines, plus a command controlling the servomotor drives mounted on each of the 3 machine axes. This additional function enables the automatic reproduction of each movement operated manually or through the joystick. With TESA-REFLEX Recorder, programming of the range of inspection operations becomes childs play by just recording any manual movement.
MPEE m (l in mm) 3 + 4L / 1000 3 + 4L / 1000 3 + 4L / 1000 3 + 4L / 1000 3 + 4L / 1000 3 + 4L / 1000 3 + 4L / 1000 3 + 4L / 1000 3 + 4L / 1000 3 + 4L / 1000 2,5 + 3,9L / 1000
Measuring volume mm 460 x 510 x 420 460 x 710 x 420 460 x 510 x 420 460 x 710 x 420 460 x 510 x 420 460 x 710 x 420 460 x 510 x 420 460 x 710 x 420 460 x 510 x 420 460 x 710 x 420 440 x 490 x 390
Max. weight on the table, kg 227 200 227 200 227 200 227 200 227 200 227
overall dimensions of each machine, mm 970 x 930 x 1620 970 x 1130 x 1660 970 x 930 x 1620 970 x 1130 x 1660 970 x 930 x 1620 970 x 1130 x 1660 970 x 930 x 1620 970 x 1130 x 1660 970 x 930 x 1700 970 x 1130 x 1730 1030 x 1100 x 1680
Machine weight, kg 210 315 210 315 210 315 210 315 210 315 225
Joystick
fine adjustment
optional
www.tesabs.ch
32
T E S A S TA R
In order to provide the optimum solution to every users need, TESA offers its CMMs with three different probe heads from the TESASTAR programme, which also includes a full range of high-precision SWISS MADE touch trigger probes and accessories for any type of machines, whether hand-operated or CnC-controlled.
TESASTAR
TESASTAR-i
TESASTAR-i M8
TESASTAR-i M8
TESASTAR M8/M8 50 mm
TESASTAR-rp
TESASTAR-p
TESASTAR-mp
visit our website and ask for our Product info about all TESASTAR probe styli and accessories available. www.tesastar.com
Threaded connection M3 M3 M8 x 45
increment 15 15
www.tesabs.ch
And more...
TESA UPD gauge block comparator Measuring span of 25 mm Allows a reduction of the number of needed reference gauge blocks by nearly 80%.
TESA UPC gauge block comparator For calibrating gauge blocks by comparison Single or dual template system for optimum ease of handling of the measured gauge blocks.
TESA TPS motorised setting benches For setting operations as well as for the calibration of display on measuring instruments used for 2-point measurement.
ETALON POLO horizontal bench For measuring precision workpieces as well as for calibrating plug gauges and measuring instruments.
TESA SA Bugnon 38 CH-1020 Renens Switzerland Tel. +41(0)21 633 16 00 Fax +41(0)21 635 75 35 www.tesabs.ch tesa-info@hexagonmetrology.com