html
Integrated Fittings
Flow Controls
Direct Mounting Right Angle & In-line Compact & Miniature Styles Brass & Composite Bodies Inch & Metric Sizes
Combination Valves
Multi Function Blocking & Flow Control Blocking & Exhaust
Blocking Valves
Direct Mounting Safe & Immediate Stopping of Piston Rod Push-in or Threaded Terminations
Non-Return Valves
Compact Light Weight In-line or Threaded Versions
Integrated Fittings
FCS701 Swivel Outlet FC705 Metal
Non-Return Valves
Page C32 FC601 Push-In Connection Page C32 FC602 Threaded Connection
Blocking Valves
Page C18 PTFL4/8PB Exhaust Flow PTFAL8PB Inlet Flow Page C18 PTFL4/8 Exhaust Flow
Page C12
Page C13
Page C25
C2
Integrated Fittings
PRS Silencer
Page C29
Page C29
Page C29
Page C30
C3
General Principle
The piston rod moves as a result of the pressure differential on either side of the piston. The speed of the rod is normally determined by the exhaust air flow from the cylinder, although certain applications require control from the inlet. The control of the air flow is via an adjustable flow control valve installed on the exhaust port.
Inlet
Exhaust
Operation
The mounting of two flow controls on a cylinder permits speed control of the cylinder rod in both directions. Air passes freely through the flow control valve A, with the check valve in the open position. The exhaust is controlled by the flow control valve B, where the check valve in the closed position forces the air to go through the adjustable needle valve. The function of A and B are reversed when inlet air is applied to port B.
Inlet chamber Outlet chamber
Advantages
Direct mounting Compact Positional Optimum flow control Swivel outlet for use where access is restricted
Inlet Exhaust
Valve Specifications
Maximum working pressure: 145 PSI Operating Temperature: - 10 to 200 F Body Material: Brass black epoxy coated Bolt Material: Brass
To power valve
Cylinder
Cylinder
C4
M
Hex 1 L Open L Closed Hex 2
C
N
M
Hex 1 L Closed L Open Hex 2
Hex 1 Hex 2
L Open L Closed
N
J
C5
FCS703-5/32-0 FCS703-5/32-2
5/32 5/32
10-32 1/8
6 8
.96 1.08
1.08 1.20
.55 .55
.73 .73
.26 .33
C HEX H L
C
Miniature Exhaust Flow Control FCM701
Composite Body
PART NO. TUBE SIZE THREAD SIZE C HEX H (MM) CLOSED H OPEN L M FLOW DIA. D
6 7 6 7 8
D M L
6 6 6 7 8
D M L
C6
C HEX
13 13 13 17 13 17 17 20
C
L
B HEX
H C HEX M L
B HEX H M C HEX
C7
Flow characteristics
Prestoflow pneumatic integrated fittings are designed to permit maximum flow in both directions. This full flow in both directions, together with the very precise setting of the screw, permits a wide range of adjustment between the minimum and maximum speeds. The sketch opposite shows the flow progression according to the adjustment of the screw.
General principle
The piston rod moves as a result of the pressure differential on either side of the piston. The speed of the rod is normally determined by the exhaust air flow from the cylinder. The control of this air flow is via an adjustable needle valve installed on the exhaust port. On single acting cylinders and some miniature (M5) double acting cylinders, the air flow can be controlled from the inlet port. To permit regular and smooth movement of the piston rod, flow control should be made as near to the cylinder as possible.
Inlet chamber
Outlet chamber
ASSEMBLY TORqUE THREAD M5 1/8 1/4 3/8 1/2 MIN. NM 0.2 6 10 14 30 MAX. NM 0.5 9 15 22 42
Inlet
Exhaust
Flow
Inlet
Operation
The mounting of two flow control devices on a cylinder permits speed control of the cylinder rod in both directions. The sketch opposite shows a cylinder with inlet air at port A. Air passes freely through the flow control valve A, with the check valve in the open position. The exhaust is controlled by the flow control fitting B, where the check valve in the closed position forces the air to go through the adjustable needle valve. The function of A and B are reversed when inlet air is applied to port B.
Inlet Exhaust
ut
le
C8
Flow adjustment
Flow control is adjusted with an Allen key. The large number of turns from fully closed to fully open allows for precise flow control.
Adjustment screw
Check valve
360
To power valve
Cylinder
Technical
BODY MATERIAL Brass Black Epoxy Coated BOLT MATERIAL Brass BOLT THREAD M5 1/8 BSPP 1/4 BSPP 3/8 BSPP 1/2 BSPP SEALING DEVICE M5 Thread Nylon Washer 1/8 - 1/2 BSPP Nitrile E.D. Seal TERMINATIONS 4 mm 12 mm Push-In Connection 1/8 - 1/2 BSPP +M5 Female Thread DIN 3852 Long WORKING TEMPERATURE From 0 to +200F WORKING PRESSURE 140 PSI
C9
PTF8PB4M5* 4 M5x0.8 8 1.65 PTF4PB4-1/8 4 1/8 14 3.00 PTF8PB6M5* 6 M5x0.8 8 1.65 PTF4PB6-1/8 6 1/8 14 3.20 PTF4PB6-1/4 6 1/4 17 5.20 PTF4PB6-3/8 6 3/8 22 5.50 PTF4PB8-1/8 8 1/8 14 3.20 PTF4PB8-1/4 8 1/4 17 5.20 PTF4PB8-3/8 8 3/8 22 6.00 PTF4PB10-1/4 10 1/4 17 5.20 PTF4PB10-3/8 10 3/8 22 6.00 PTF4PB10-1/2 10 1/2 27 8.00 PTF4PB12-3/8 12 3/8 22 6.00 PTF4PB12-1/2 12 1/2 27 8.50 * These fittings are supplied with Nylon seal.
10.0 14.4 10.0 14.4 18.4 21.6 14.4 18.4 21.6 18.4 21.6 26.5 21.6 26.5
1.5 2.0 1.5 2.0 4.0 4.0 2.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0
4 6 4 6 7 7 6 7 7 7 7 9 7 9
19.5 22.0 20.5 23.5 25.0 28.0 25.0 28.5 29.5 31.5 34.0 36.5 34.0 36.5
24.5 30.1 26.5 31.6 34.9 40.7 33.1 38.3 42.2 41.3 46.7 52.1 46.7 52.1
6.3 10.7 7.3 10.7 13.8 17.3 10.7 13.8 17.3 13.8 17.3 20.1 17.3 20.1
22.0 34.5 24.5 34.5 41.0 51.0 34.5 41.0 51.0 41.0 51.0 61.0 51.0 61.0
10 10 12 12 12 12 14 14 14 17 17 17 20 20
10 14 12 14 17 22 14 17 22 17 22 27 22 27
O 1
PTFA8PB4M5* 4 M5x0.8 8 1.7 PTFA4PB4-1/8 4 1/8 14 3.0 PTFA8PB6M5* 6 M5x0.8 8 1.7 PTFA4PB6-1/8 6 1/8 14 3.2 PTFA4PB6-1/4 6 1/4 17 5.2 PTFA4PB8-1/8 8 1/8 14 3.2 PTFA4PB8-1/4 8 1/4 17 5.2 * These fittings are supplied with Nylon seal.
4 6 4 6 7 6 7
10 10 12 12 12 14 14
10 14 12 14 17 14 17
O 1
M1 M LU C5 N1 N Y D B G1 J H1
14 17 22 27
2 4 4 4
6 7 7 9
14 17 22 27
O A
Only items priced in current price list are carried in stock. Dimensions shown may be changed at any time without prior notice.
C10
Flow adjustment
Flow control is adjusted with an Allen key. When the desired flow is set the adjusting screw can be locked using the locking nut. The large number of turns from fully closed to fully open allows for precise flow control.
C
Adjustment screw
Check valve
360
To power valve
Cylinder
page 1
Technical features
BODY MATERIAL Brass Black Epoxy Coated BOLT MATERIAL Brass LOCK NUT Brass BOLT THREAD M5 1/8 BSPP 1/4 BSPP 3/8 BSPP 1/2 BSPP SEALING DEVICE M5 Thread Nylon Washer TERMINATIONS 1/8 - 1/2 BSPP +M5 Female Thread DIN 3852 Long WORKING WORKING TEMPERATURE PRESSURE From 0 to +200F 140 PSI
C11
M1 M H1 H2 C5 N1 N Y D B G1 J
PTFL8PB4M5* 4 M5x0.8 8 1.65 10.0 PTFL4PB4-1/8 4 1/8 14 3.00 14.4 PTFL8PB6M5* 6 M5x0.8 8 1.65 10.0 PTFL4PB6-1/8 6 1/8 14 3.20 14.4 PTFL4PB6-1/4 6 1/4 17 5.20 18.4 PTFL4PB6-3/8 6 3/8 22 5.50 21.6 PTFL4PB8-1/8 8 1/8 14 3.20 14.4 PTFL4PB8-1/4 8 1/4 17 5.20 18.4 PTFL4PB8-3/8 8 3/8 22 6.00 21.6 PTFL4PB10-1/4 10 1/4 17 5.20 18.4 PTFL4PB10-3/8 10 3/8 22 6.00 21.6 PTFL4PB10-1/2 10 1/2 27 8.00 26.5 PTFL4PB12-3/8 12 3/8 22 6.00 21.6 PTFL4PB12-1/2 12 1/2 27 8.50 26.5 * These fittings are supplied with Nylon seal.
1.5 2.0 1.5 2.0 4.0 4.0 2.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0
8 7 8 7 11 11 7 11 11 11 11 14 11 14
4 6 4 6 7 7 6 7 7 7 7 9 7 9
19.5 22.0 20.5 23.5 25.0 28.0 25.0 28.5 29.5 31.5 34.0 36.5 34.0 36.5
24.5 30.1 26.5 31.6 34.9 40.7 33.1 38.3 42.2 41.3 46.7 52.1 46.7 52.1
6.3 10.7 7.3 10.7 13.8 17.3 10.7 13.8 17.3 13.8 17.3 20.1 17.3 20.1
28.5 43.7 31.0 43.7 51.8 63.7 43.7 51.8 63.7 51.8 63.7 76.1 63.7 76.1
10 10 12 12 12 12 14 14 14 17 17 17 20 20
10 14 12 14 17 22 14 17 O 1 22 17 22 27 22 27
M1 M H1 H2 C5 N1 O 1 N J Y D B G1
PTFAL8PB4M5 4
M5x0.8
1.65 10.0
1.5
19.5
24.5
6.3
28.5
10
10
PTFL8M5* M5x0.8 M5x0.8 8 1.65 10.0 PTFL4-1/8 1/8 1/8 14 3.20 14.4 PTFL4-1/4 1/4 1/4 17 5.20 18.4 PTFL4-3/8 3/8 3/8 22 6.00 21.6 PTFL4-1/2 1/2 1/2 27 8.50 26.5 * These fittings are supplied with Nylon seal.
8 7 11 11 14
4 6 7 7 9
10 14 17 22 27
1.65
10.0
1.5
11
16
6.3
28.5
10
C12
To power valve
Flow adjustment
Flow control is adjusted with an Allen key. The large number of turns from fully closed to fully open allows for precise flow control.
C
Fine thread adjustment screw
180
Check valve
Cylinder
Technical features
BODY MATERIAL Brass Black Epoxy Coated SWIVEL BOLT ELBOW MATERIAL MATERIAL High Resistance Polyamide Brass BOLT THREAD M5 1/8 BSPP 1/4 BSPP 3/8 BSPP 1/2 BSPP SEALING DEVICE M5 Nylon Washer 1/8 - 3/8 BSPP Nitrile E.D. Seal TERMINATIONS 4 mm - 8 mm Push-In ADJUSTMENT SCREW Brass WORKING TEMP. From 0 to +150F
page 3
WORKING PRESSURE 140 PSI
M2 M 1 H1 P C5 N1 N Y D B G1 J
PTF8E6PB4M5* 4 M5x0.8 8 1.65 PTF4E6PB4-1/8 4 1/8 14 3.00 PTF8E6PB6M5* 6 M5x0.8 8 1.65 PTF4E6PB6-1/8 6 1/8 14 3.20 PTF4E6PB6-1/4 6 1/4 17 5.20 PTF4E6PB6-3/8 6 3/8 22 5.50 PTF4E6PB8-1/8 8 1/8 14 3.20 PTF4E6PB8-1/4 8 1/4 17 5.20 PTF4E6PB8-3/8 8 3/8 22 6.00 * These fittings are supplied with Nylon seal.
4 6 4 6 7 7 6 7 7
10 14 12 14 17 22 14 17 22
Only items priced in current price list are carried in stock. Dimensions shown may be changed at any time without prior notice.
C13
Operation
Mounted on outlet port of FRL to control downstream installation. Initial flow through the bolt is controlled by a restrictor and adjustable needle valve. When 2/3rd system pressure is achieved the spring is compressed allowing immediate increase to full system pressure. When the system is pressurized after an emergency stop all cylinders will return to the position they were in before the system air was vented.
FRL
Supply pressure
Pressurization speed
Adjustment of the needle valve to regulate the air flow controls the time taken to pressurize the system.
Advantages
Full Flow
no c
ontr
ol
Valve Specifications
Maximum Working Pressure: 145 PSI Operating Temperature: +5 - +150 F Body Material: Brass nickel plated Bolt Material:Brass nickel plated
sl with
ow-
star
ter
Adjustable time
time
FC902-4 FC902-6
1/4 3/8
2.44 2.44
2.17 2.17
7/8 7/8
3/4 3/4
.95 .95
1.22 1.22
.55 .55
Min
Max
C14
Power Valve
PIV Series
FRL
PCV Series
Adjustment by Allen PIV Series Key Black identification washer Pressure speed regulator Spring Adjustable needle Valve From FRL From FRL
page 9 dessin 1
Pressurization speed
Adjustment of the needle valve to regulate the air flow controls the time taken to pressurize the system. Use a spanner to prevent the bolt assembly turning. Use an Allen key to adjust the needle valve. Maximum torque 1N/m.
Power valve
Adjustment
page 9 dessin 2
Spanner
Full Flow
s with
low
-sta
rter
page 9 dessin 3
Adjustable time
time
Technical features
BODY MATERIAL PUSH-IN VERSION THREAD VERSION BOLT ASSEMBLY MATERIAL BOLT THREAD SEALING DEVICE TERMINATORS
courbe page 9
WORKING TEMP.
WORKING PRESSURE
Nylon Washer
8 to 12 mm Push-In
From 0 to +140F
100 PSI
C15
PCV4 Slow Start Fitting Power Valve Version with Threaded Connection
PART NO. B C5 G1 H H MIN. MAX. J L Y TORqUE MDAN AIR FLOW NL/MN AT 87 PSI
L
KV
PCV4-1/4 PCV4-3/8
1/4 3/8
22 22
19.5 21.0
55 55
62 62
9 10
31 31
24 24
1.3 1.5
2000 2000
1.15 1.15
C5 B
Min
Max
Y B G1 Y/2
Indicates non-standard part. Only items priced in current price list are carried in stock. Dimensions shown may be changed at any time without prior notice.
C16
C Blocking Valves
Principle
Prestobloc pilot-operated blocking fittings are designed for mounting directly to the cylinder ports. Available with push-in or threaded terminations, these function fittings permit safe and immediate stopping of the piston rod by blocking the cylinder supply and exhaust. Pilot operated diaphragm maintains full flow when pilot signal is present. Spring closes the poppet valve locking air in the cylinder when the pilot signal is removed. Prestobloc fittings used in conjunction with Prestoflow flow regulators are mounted on inlet and outlet ports. Pilot signal should be independent from the control valve.
Operation
To power valve
Advantages
Cylinder
Valve Specifications
Maximum Working Pressure: 145 PSI Operating Temperature: +5- +150 F Body Material: Zinc alloy epoxy coated Bolt Material: Brass
To power valve
Cylinder
Blocking principle
Moving
Blocked
exhaust
exhaust
P
Pilot signal
supply
supply
C17
L 2 A H 1 K NPT C
L
FLOW A B C K H L NPT
2 A H
NPT
Operating Characteristics
PILOT OPERATING PRESSURE (100% FLOW) BOLT SIZE 29 psi 58 psi 87 psi 116 psi 29 psi 58 psi 87 psi 116 psi PILOT RELEASE PRESSURE MAX. INPUT FLOW AT 87 PSI
C18
Operation
exhaust
exhaust
P
Pilot signal
supply
supply
Diaphragm
Blocked
exhaust
To power valve
P
exhaust
P
Pilot signal
supply
supply
Poppet valve
Removal initiates blocking
Spring
Blocking principle
Cylinder
Technical features
BODY MATERIAL Zinc Alloy Epoxy Coated BOLT MATERIAL Brass BOLT THREAD 1/8 BSPP 1/4 BSPP 3/8 BSPP 1/2 BSPP SEALING DEVICE Nylon Washer TERMINATIONS 6 mm page26mm 1
Push-In
page 6
Applications
Safety stop
Prevents descent under load in the event of power failure
Stops the piston in various positions for conveying and handling applications.
Safety guards for assembly and punch presses. Combination with an emergency switch: restarting the cylinder after resetting the emergency switch.
M 2 O N1 1 N Y B C5
6 6 8 8 10 12
4 4 4 4 4 4
24 24 24 27 27 27
39 39 39 50 50 66
20 22 22 25 25 36
59 61 61 64 64 78
20 22 22 27 27 31
22 24 24 24 24 33
M1 2 O N1 B1 N Y B C5
4 4 4 4
24 24 27 27
44 44 56 63
20 22 25 36
59 61 64 78
20 22 27 31
24 24 24 33
Operating Characteristics
Pilot operating pressure Bolt Size 3 Bar 6 Bar 8 Bar 3 Bar 6 Bar 8 Bar Pilot release pressure Max. input flow at 6 Bar
1450 l/mn ANR 2800 l/mn ANR 3950 l/mn ANR 4750 l/mn ANR
Only items priced in current price list are carried in stock. Dimensions shown may be changed at any time without prior notice.
C20
Designed to be versatile
Parker In-Line Flow Controls are unidirectional flow control valves. Intake air flows freely through the flow control; exhaust air is metered out through a specially designed adjustment screw. An arrow on the body of the valve indicates the direction of controlled flow. Since it is a tube to tube connection, our in-line flow controls may be installed as a meter in or a meter out device. Parker in-line flow controls can be easily added to existing circuitry. Simply splice it into the cylinder port line. In-line flow controls may be used individually or, they may be stacked together using two joining clips, supplied standard with each valve. Panel mounting is accomplished by using the through holes in the molded body.
To power valve
Clip
Slots
Adjustment characteristics
Control is achieved through a finely threaded special adjustment screw. The special shaped adjustment screw produces a more linear flow control than ordinary tapered screws. With the use of a locking nut, the in-line flow control may be secured in its final setting. Settings are maintained even under adverse conditions such as vibration. A captive adjustment screw prevents loss or dangerous blow out.
Inlet chamber Outlet chamber
Advantages
Inlet
Exhaust
Assembly in banks Panel mounting Allows other function fittings to be mounted on a cylinder Space saving Weight saving Flexibility
Valve Specifications
Maximum Working pressure: 145 PSI Operating Temperature: +5 - +150 F Body material: High resistance polyamide Adjustment screw material: Brass
Inlet Exhaust
C21
5 8 14 14
1
H2 H 1
N2 L1 L
13 16 22 24
8 11 14 14
L L1 B HEX
N1 C HEX
C22
Flow adjustment
Flow control is adjusted with a screwdriver or manually with the knurled nut. When the desired flow is set the adjusting screw can be locked using the locking nut. The large number of turns from fully closed to fully open allows for precise flow control.
Clip
Slots
Exhaust from cylinder To power valve
Technical features
BODY MATERIAL High Resistance Polyamide CARTRIDE MATERIAL Brass ADJUSTMENT AND LOCKING NUT Standard Adjustment Brass Ultrafine Adjustment Duralumin TERMINATIONS 4 mm - 12 mm Push-In WORKING TEMPERATURE From 0 to +150F WORKING PRESSURE 140 PSI
page 5
4 6 8 10 12
5 8 11 14 14
15 23 26 33 35
H2 H 1 1
N2 L1 L
Only items priced in current price list are carried in stock. Dimensions shown may be changed at any time without prior notice.
C23
PTFMIPK4 PTFMIPK6
4 6
34 42
37.0 45.5
12 17
39 54
15 23
8 11
11 17
2.2 3.2
H2 H 1 1
N2 L1 L
14 19 24 30 32
11 14 14
6 7 7 7 8
1
H2 H C H3
T L
W H1
Indicates non-standard part. Only items priced in current price list are carried in stock. Dimensions shown may be changed at any time without prior notice.
C24
The pilot signal acting on the diaphragm keeps the poppet valve open. When the pilot signal is removed the spring closes the poppet valve. Flow control is obtained by the adjustment of the rotating barrel against a ball bearing. The flow control locknut ensures the optimum setting is maintained.
To power valve
page 7 dessin 1
Technical features
BODY MATERIAL Zinc Alloy Epoxy Coated BOLT MATERIAL Brass BOLT THREAD 1/8 BSPP 1/4 BSPP SEALING DEVICE Nylon Washer PILOT TERMINATION 4 mm - 8 mm Push-In FLOW CONTROL ADJUSTMENT Rotating Barrel FLOW CONTROL LOCKING Knurled Locknut WORKING TEMP. From 0 to +140F WORKING PR E S S U R E 140 PSI
4 6 6 8 8 10
4 4 4 4 4 4
24 24 24 24 27 27
8 8 10 10 11 11
47 47 47 47 60 60
67 67 69 69 73 73
21 21 21 21 28 28
1 N
M 2 O
C5 Y N1
J B
C25
Operation
Mounting to cylinder port Pressure sensors should be mounted in conjunction with flow regulators Pressure sensing on diaphragm valve.
Ai
To power valve
P
Ao Po
courbe page 8
Pneumatic back pressure sensor
Ai Pi Po
Flow control regulator
S P
Ai Pi
Ao
Ao
Po Ai Ao Pi
Pi
Po
Pi Po
Cylinder A
Technical features
BODY MATERIAL PNEUMATIC OUTPUT VERSION ELECTRIC AND ELECTRONIC VERSION BOLT MATERIAL BOLT THREAD SEALING DEVICE PNEUMATIC OUTPUT VERSION TERMINATORS ELECTRIC OUTPUT VERSION ELECTRONIC OUTPUT VERSION WORKING TEMP.
page 8
page 8
WORKING PRESSURE
Nylon Washer
From 0 to +140F
100 PSI
B C5
14 17 22 27
23 28 29 30
10.5
4 4 Y B G1 M Y/2
H J
Only items priced in current price list are carried in stock. Dimensions shown may be changed at any time without prior notice.
C26
PWS-M1012
0.08
Electrical ~ Ve = 3 A
18 x 14
2m
B Y C5
6 8 10 12
8 10 11 12
18 18 22 26
28 28 32 38
16 21 28 33
N1 N J B
NEW PART NO. PWS-M1012 + PWS-B155 PWS-M1012 + PWS-B188 PWS-M1012 + PWS-B199 PWS-M1012 + PWS-B133 PWS-M1012 + PWS-B122 PWS-E101 + PWS-B155 PWS-E101 + PWS-B188 PWS-E101 + PWS-B199 PWS-E101 + PWS-B133 PWS-E101 + PWS-B122 PWS-E111 + PWS-B155 PWS-E111 + PWS-B188 PWS-E111 + PWS-B199 PWS-E111 + PWS-B133 PWS-E111 + PWS-B122 OLD PART NO. PTZ8M5 PTZ4-1/8 PTZ4-1/4 PTZ4-3/8 PTZ4-1/2 PTE8M5 PTE4-1/8 PTE4-1/4 PTE4-3/8 PTE4-1/2 PTE8M5C PTE4-1/8C PTE4-1/4C PTE4-3/8C PTE4-1/2C
All black pressure sensors are a combination of two distinct parts: a banjo socket + a plug-in sensor. Banjo socket Allen screw Plug-in sensor
Locking clip
Black (BK)
Only items priced in current price list are carried in stock. Dimensions shown may be changed at any time without prior notice.
C27
Energy saving indicator Adjustable spring Poppet valve Rapid exhaust vent
Pr
To the cylinder
page 10
Technical features
BODY MATERIAL PUSH-IN VERSION THREAD VERSION BOLT ASSEMBLY MATERIAL BOLT THREAD SEALING DEVICE TERMINATORS WORKING TEMP. WORKING PRESSURE
Zinc Alloy
Brass
Nylon Washer
6 to 10 mm Push-In
From 0 to +150F
100 PSI
Pressure
Energy setting
Pi - Pr
back pressure Time reversal of control valve start of cylinder stroke Pressure saving courbe page 10 end of cylinder stroke
6 bar yellow : maximum saving orange : high saving red : moderate saving 4 2 0
Out stroke
End of stroke
Return stroke
page 10
Pr
Pr
Pr
C28
6 6 8 10 10
19 19 19 27 27
22 22 22 28 28
20 20 20 26 26
49 49 49 55 55
57 57 57 64 64
12 12 12 15 15
6 6 6 6 8
43 43 40 50 50
21 21 21 28 28
G3 1
H1 Y B G1 M Y/2 J
19 19 24 30
19 19 27 30
22 22 28 32
20 20 26 31
49 49 55 75
57 57 64 86
12 12 15 23
6 6 6 8
45 45 56 63
21 21 28 33
B
G3
H1 C1 Y B G1 L Y/2 J
6 8 10
11 13 17
21 21 28
49 49 61
57 57 70
14 14 19
22 22 27
75 72 90
4 4 5
1
G2 H2 W
H1 T M L G3
17 17 22 27
19 19 27 30
11 13 17 19
21 21 28 31
49 49 61 75
57 57 70 86
14 14 19 23
22 22 27 32
74 83 90 119
35 44 44 61
4 4 5 7
G2 H2 W C2 B
C1 T L1 L
G3
Indicates non-standard part. Only items priced in current price list are carried in stock. Dimensions shown may be changed at any time without prior notice.
C29
Int
egra
tt
Bronze cartridge
d te
fi
in
Flow control
The adjusting screw of the uni- direction flow control valve allows fine adjustment of the restriction and thus precise control of the piston-rod speed. The setting is secured by a lock nut.
Technical features
BODY MATERIAL Aluminum BOLT MATERIAL Bronze NEEDLE VALVE MATERIAL Aluminum LOCKNUT MATERIAL Aluminum SILENCER THREAD WORKING TEMPERATURE WORKING PRESSURE 140 PSI
1/8 BSPP From 0 to Coupe + silencer 1/4 BSPP Flow regulator +200F 3/8 BSPP 1/2 BSPP
11 14 19 22
43 60 80 83
48 68 88 91
14 17 26 26
O C
Only items priced in current price list are carried in stock. Dimensions shown may be changed at any time without prior notice.
C30
C Non-Return Valves
General Information
Parker offers two styles of Non-Return valves, In-Line, tube to tube, and a threaded version with NPT male threads. Their extreme compactness and light weight make them suitable as a safety item in compressed air circuits. The body of the fitting is marked with an arrow to indicate the direction of flow.
General Principle
Parker Non-Return Valves allow air to pass in one direction while blocking flow in the other direction. A pressure of more than 7 psi will overcome the spring pressure, which is keeping the valve closed, thus allowing the passage of air.
Valve Specifications
Maximum Working Pressure: 145 PSI Operating Temperature: +30 to +160 F Body Material: Nylon / Nickel-Plated Brass Body
C31
Non-Retun Valves
Non-Return Diaphragm
Non-Return Diaphragm
C HEX
C32