Page 1 of 7
Asset / Package FPSO/FSO - Generic New Construction Specification Name: Location: Prepared By: Mitchelson, Brian Our Ref: 041206-BMITCH-231C5 Prepared On: 8 Sep 2010
Intergard 263 Epoxy Interspeed 340 Interspeed 340 TBT Free Polishing Copolymer A/F TBT Free Polishing Copolymer A/F
TBT Free Polishing Copolymer A/F TBT Free Polishing Interspeed 340 Copolymer A/F Intersmooth 465 TBT Free Polishing SPC Copolymer A/F
https://secure.international-coatings.com/scripts/cgiip.exe/WService=flgn013EX/InterSp... 7/5/2012
Page 2 of 7
Topsides
A high durability (above 15 years) coating specification designed for environments classified by ISO 12944-2 as C5-M very high corrosivity (Marine).
https://secure.international-coatings.com/scripts/cgiip.exe/WService=flgn013EX/InterSp... 7/5/2012
Page 3 of 7
m2/l Intershield 300 Intershield 300 Intershield 300 Intergard 740 Epoxy Epoxy Epoxy Epoxy Full Coat 60 Full Coat 60 Full Coat 60 Full Coat 51 125 125 125 75 450 4.80 4.80 4.80 6.80 8 Hour(s) - 14 Day(s) 8 Hour(s) - 14 Day(s) 8 Hour(s) - 5 Day(s) 40 Hour(s) - Extended * 7 Hour(s) - 14 Day(s) 7 Hour(s) - 14 Day(s) 7 Hour(s) - 4 Day(s) 16 Hour(s) - Extended *
Full Coat 100 1100 Full Coat 85 Full Coat 51 500 50 2225
Whilst first coat is still wet, blind with aggregate GMA132 . Once dry sweep off excess and apply sealer coat.
Engine Room
A high durability coating specification designed for environments classified by ISO 12944-2 as C1 very low corrosivity.
https://secure.international-coatings.com/scripts/cgiip.exe/WService=flgn013EX/InterSp... 7/5/2012
Page 4 of 7
accordance with SSPC-SP1 solvent cleaning. Abrasive blast clean to Sa2.5 (ISO 8501-1:1988) or SSPC-SP10. If oxidation has occurred between blasting and application, the surface should be reblasted to the specified visual standard. Surface defects revealed by the blast cleaning process, should be ground, filled, or treated in the appropriate manner A sharp, angular surface profile of 50-75 microns (2-3 mils) is recommended.
Product Name Intershield 300 Intershield 300 Description Epoxy Epoxy Coat Type VS DFT TSR Overcoating interval at 10C Min Max % micron m2/l 150 150 300 4.00 4.00 8 Hour(s) - 14 Day(s) 8 Hour(s) - 14 Day(s) Overcoating interval at 25C Min Max 7 Hour(s) - 14 Day(s) 7 Hour(s) - 14 Day(s)
Tanks - Ballast
A high performance coating specification for exposure in immersed environments.
https://secure.international-coatings.com/scripts/cgiip.exe/WService=flgn013EX/InterSp... 7/5/2012
Page 5 of 7
https://secure.international-coatings.com/scripts/cgiip.exe/WService=flgn013EX/InterSp... 7/5/2012
Page 6 of 7
TEst 212
A high durability (above 15 years) coating specification designed for environments classified by ISO 12944-2 as C5-M very high corrosivity (Marine).
Interprime Etch Solution 160 Intergard 251 Epoxy Acrylic Interfine 979 Polysiloxane
https://secure.international-coatings.com/scripts/cgiip.exe/WService=flgn013EX/InterSp... 7/5/2012
Page 7 of 7
The detailed Recommended Working Procedures for Interfine 979 should be consulted prior to use. It is recommended that when evaluating polysiloxane products that the following minimum requirements are met : Durability: This specification provides a top coat that will provide a minimum gloss retention of 80% of the original after 5000 hours of QUVA. Long Term Flexibility is an important measure of how well a coating ages. It is essential for a coating, if it is to maintain its integrity to demonstrate long term flexibility. Poor flexibility can be linked to cracking and breakdown at stress points e.g welds, edges. Test : ISO 1519 (cylindrical mandrel bend test). Polysiloxane applied to a panel and aged in an ISO12944 C5I environment for 6 months. Result - No cracking/disbondment on a 12.7 mm (1/2 inch) mandrel. For further information regarding prices, availability and technical information please consult International Protective Coatings. We may at our discretion provide free of charge technical service support to customers consisting of the provision of a technical service representative who may periodically or on a reasonable request visit the site and liaise with the customer concerning product requirements, application training and general advice concerning our products. We accept no liability whatsoever in connection with the provision of or a failure to provide such free of charge technical support. We reserve the right to reassess this offer should the costs to us change significantly during the quotation period. Subject to our Standard Terms and Conditions which are available on request. Please also refer to our current Product & Material Safety Datasheets prior to using any products.
* See International Protective Coatings Definitions and Abbreviations.
https://secure.international-coatings.com/scripts/cgiip.exe/WService=flgn013EX/InterSp... 7/5/2012