www.ngfl-cymru.org.uk
www.ngfl-cymru.org.uk
TIMBER STRENGTH
Timber is stamped according to its strength properties, as described below:-
Structural components include pre-fabricated frames, wall panels, joists and roof trusses.
www.ngfl-cymru.org.uk
The design of structural members takes into account: Dead loads - which includes weight of the actual building, such as bricks, tiles and timber. Imposed loads machinery, furniture etc. Live loads the weight of people in the building. Snow and wind loads when it snows, additional loading is imposed on the roof, and wind loads occur in high winds. Loads are illustrated on the next slide
www.ngfl-cymru.org.uk
www.ngfl-cymru.org.uk
www.ngfl-cymru.org.uk
Factory-made components result in high levels of repetition, accuracy and quality. This leads to cost savings during construction. Timber components for a roof truss are laid out on a jig, as shown right. Each component is precut to the exact dimensions required.
www.ngfl-cymru.org.uk
Timber parts are fixed together mechanically, using toothed steel plates.
www.ngfl-cymru.org.uk
Studs (verticals) and sole plates are laid out to exact dimensions, and nailed together.
www.ngfl-cymru.org.uk
The panel head is offered up to the panel frame. The head is fixed with pneumatic nail guns.
www.ngfl-cymru.org.uk
Right nails fixed to timber. Below Pneumatic nail gun and nail cartridge.
www.ngfl-cymru.org.uk
www.ngfl-cymru.org.uk
Bands are stapled to the panel to mark the positions of studs. This helps tradesmen on site to establish fixing points for other building components.
www.ngfl-cymru.org.uk
JOISTS
Joists are structural components that span the width of a building. Finished joists, awaiting delivery to a construction site, are shown left.
www.ngfl-cymru.org.uk
www.ngfl-cymru.org.uk
The foundation layout of a timber framed building is shown on the following slide, and construction methods of this type of foundation also follow.
www.ngfl-cymru.org.uk
Concrete blinding
Polystyrene shuttering
www.ngfl-cymru.org.uk
www.ngfl-cymru.org.uk
www.ngfl-cymru.org.uk
www.ngfl-cymru.org.uk
In the above image, a steel frame connects the timber superstructure to the foundations. The red arrows indicate where columns are bolted to the foundations. A more detailed image is shown on the next slide.
www.ngfl-cymru.org.uk
Joists will be fire protected by plasterboard before the building is occupied Steel beams fire protected by sprayed on intumescent paint
Block work: forms part of the structure, and offers fire protection to steelwork
www.ngfl-cymru.org.uk
Load carrying components are doubled in size and transmit building loads to the foundations: a close-up is shown on the www.ngfl-cymru.org.uk following slide.
Studs
Noggins
www.ngfl-cymru.org.uk
Prefabricated components are marked with their locations. This speeds up construction time and reduces construction costs.
www.ngfl-cymru.org.uk
Stud walls are fixed in position to form separate spaces. These will eventually be fire protected by plasterboard. www.ngfl-cymru.org.uk
Once stud walls are fixed, first fixing for plumbing and power can take place.
www.ngfl-cymru.org.uk
As prefabricated components arrive, rapid construction follows. The above image shows the view looking down a communal corridor of an apartment block, whilst under construction.
www.ngfl-cymru.org.uk
A vapour barrier, used to stop rain water entering the building, is fixed externally. www.ngfl-cymru.org.uk
Battens are fixed over the vapour barrier, and insulation is fitted between the battens. Cement render is applied to provide an external finish. Colour pigment can be included in the render (known as a through-colour render), or the render can be painted after curing. www.ngfl-cymru.org.uk
Large items, such as roof trusses are lifted into place with a crane.
www.ngfl-cymru.org.uk
www.ngfl-cymru.org.uk
www.ngfl-cymru.org.uk
Structural flooring and wall panels, stored on site and ready for fixing.
www.ngfl-cymru.org.uk