Sep 2010
Note: The LCT screen shots shown in this document might not be identical to the ones actually observed on LCT.
TOPC-E4011E-02-
Contents
1. 2. 3. 4. 5. 6.
Introduction to LCT & Connection Equipment Setup & Provisioning of Main Radio Parameters Activation of TDM Services Basic Maintenance Operations for Radio & TDM Portion Management Network Settings for activation of Remote LCT Activation of Basic Ethernet Services
TOPC-E4011E-02-
Chapter 1
TOPC-E4011E-02-
COMMUNICATION BETWEEN THE LCT AND THE iPASOLINK IS VIA THE LCT PORT OF IDU. CONNECTION IS BY LAN CABLE.
WINDOWS XP CPU RAM HDD DISPLAY LAN PORT PENTIUM-M 1.6GHz OR BETTER 512MB OR MORE 40 GB OR MORE FREE CAPACITY COLOR LCD (1024x768) 10/100 Base T(X) WINDOWS VISTA & WINDOWS 7 INTEL CORE2 DUO 1.6 GHz 1 GB 40 GB OR MORE FREE CAPACITY COLOR LCD (1024x768) 10/100 Base T(X) OS SOFTWARE REQUIREMENT WIN DOWS XP (ENGLISH VERSION) WINDOWS VISTA (ENGLISH VERSION) WINDOWS 7 (ENGLISH VERSION) IE8, IE7, FIREFOX3.6 OR HIGHER
TOPC-E4011E-02-
IP Settings in PC:
TOPC-E4011E-02-
http://172.17.254.253/
Password
Config
User
TOPC-E4011E-02-
CONFIG
OPERATOR
TOPC-E4011E-02-
Chapter 2
TOPC-E4011E-02-
TOPC-E4011E-02-
EQUIPMENT CONFIGURATION
Modem SW/XPIC GRP Configuration shows the how the Modem 1 and 2 are used.
TOPC-E4011E-02-
10
Name window.
Left side shows the current setting. Click on the Equipment Name field in the New setting in the right hand of the window. And enter the new name. (up to 32 characters)
If you exceed the number of characters, the entry field border turns to red and when the cursor is moved to the entry field pop will show the limits
2 Click on the Next Button to go to next setting 3
Setting of SW/XPIC Group window allows setting of how the two modems are used. For (1+1) configuration click on the check box SW/XPIC GRP and click on the drop down arrow and select the required option. Other wise click on modem 1 or modem 2 and select used or not used. Click the Next button to go to the next setting window
window. If the name field characters exceed, Input Error warning popup appears.
TOPC-E4011E-02-
11
TOPC-E4011E-02-
12
13
Selected modem
Radio Mode: select High capacity or High system Gain. High system gain is achieved by better FEC.
Select the number of E1 channels to be used Select the number of STM-1 channels to be used (need STM-1 optional Interface card (one STM-1)
Select the TX Power Control Mode. ATPC or MTPC. Parameter setting for each mode is from provisioning menu
TOPC-E4011E-02-
14
15
16
E1/STM-1 Mapping Settings: Priorities for preservation of traffic (E1/STM1/Ethernet) as modulation level (and therefore transmission capacity) decreases
17
18
TOPC-E4011E-02-
19
TOPC-E4011E-02-
20
Example:
Only for systems with 2 enabled Modems in 1+1 Redundancy Configuration. Example:
Example:
TOPC-E4011E-02-
21
TOPC-E4011E-02-
22
TOPC-E4011E-02-
23
TOPC-E4011E-02-
24
TOPC-E4011E-02-
25
TOPC-E4011E-02-
26
Chapter 3
TOPC-E4011E-02-
TOPC-E4011E-02-
28
Example:
TOPC-E4011E-02-
29
Example:
TOPC-E4011E-02-
30
TOPC-E4011E-02-
31
Chapter 4
TOPC-E4011E-02-
TOPC-E4011E-02-
33
TOPC-E4011E-02-
34
TOPC-E4011E-02-
35
TOPC-E4011E-02-
36
TOPC-E4011E-02-
37
TOPC-E4011E-02-
38
TOPC-E4011E-02-
39
TOPC-E4011E-02-
40
INVENTORY(1)
Example for IDU:
TOPC-E4011E-02-
41
INVENTORY(2)
TOPC-E4011E-02-
42
Example:
TOPC-E4011E-02-
43
Chapter 5
TOPC-E4011E-02-
TOPC-E4011E-02-
45
Example:
TOPC-E4011E-02-
46
Example:
TOPC-E4011E-02-
47
Example:
TOPC-E4011E-02-
48
Example:
TOPC-E4011E-02-
49
254
TOPC-E4011E-02-
50
TOPC-E4011E-02-
51
Chapter 6
TOPC-E4011E-02-
TOPC-E4011E-02-
53
Example:
TOPC-E4011E-02-
54
Example:
TOPC-E4011E-02-
55
Example:
Example:
TOPC-E4011E-02-
56
TOPC-E4011E-02-
57
Modem port transports the VLAN IDs enabled here. In this example, only tagged frames belonging to VLAN ID = 2, 10, 20 or 30 are processed on this Modem1 port.
TOPC-E4011E-02-
58
Only Untagged frames are processed on Port 2, and these frames are assumed to belong to VLAN ID = 10
P1 (FE)
Fm to VLAN MSG A C x
TOPC-E4011E-02-
59
Fm to VLAN MSG A B 2
Fm to A B
MSG
Fm to VLAN MSG A C 20
Fm to VLAN MSG A C 20
P2 (FE)
Fm to VLAN MSG A C other
TOPC-E4011E-02-
60
Any frame type on Port 3, either untagged or tagged with any VLAN ID, will be unconditionally tagged (Outer Tag) with VLAN ID = 30 and then processed.
P3 (FE)
TOPC-E4011E-02-
61
TOPC-E4011E-02-
62
Registration
Deletion Click
Register VLAN ID
Remove ports from VLAN ID to be deleted (Assign VLAN ID VLAN Assignment Clear)
(Add VLAN)
Delete VLAN ID
End
End
Uncheck
TOPC-E4011E-02-
63
Thank you
Note: The LCT screen shots shown in this document might not be identical to the ones actually observed on LCT.
TOPC-E4011E-02-
64