www.huawei.com
Foreword
Page 2
Reference
Page 3
Objectives
Upon completion of this course, you will be able to:
Describe the functions of the T2000 and the T2000 Web
LCT.
Install the T2000 Web LCT.
Configure services and protection by using the T2000
Page 4
Contents
1.
Introduction to Networks
Management Systems
Page 5
Comprehensive Management
System Solution
OSS or integrated
NMS
Service
management
layer
CORBA
CORBA
iManager T2100
MML
iManager T2000
iManager T2100
MML
CORBA
Network
management
layer
MML
iManager T2000
iManager T2000
NE
management
layer
iManager T2000
LCT
Qx
Qx
Qx
Qx
NE layer
Page 6
Introduction to Management
Systems
The
orientation of each management system is as follows:
iManager T2000
iManager T2100
The T2000 local craft terminal (LCT) realizes the local maintenance and
equipment turn-up of Huawei OptiX products.
iManager MDS
Page 7
Introduction to Management
Systems
Page 8
Contents
1.
Page 9
Contents
Introduction to the
T2000 Web LCT
Page 10
Web-based solution
Page 11
Page 12
Contents
Introduction to the T2000 Web LCT
Page 13
Page 14
The personnel at the network operations center install the EMS or NMS on a PC.
Install the T2000 Web LCT as a part of the EMS. The NMS need not be installed.
The personnel at the network operations center starts the T2000 Web LCT by
using the EMS or NMS client.
NMS
DCN
EMS
EMS
NE network
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
NE network
Page 15
Contents
Page 16
Configuration requirements
Hardware requirements
Page 17
Software requirements
Tomcat 5.0
JDK1.4.2
Servlet 2.3
Page 18
Procedure
Page 19
click Next.
Page 20
Page 21
Page 22
Step 5 Click Install and the Setup Status dialog box is displayed.
After the T2000 Web LCT is installed, the Installation Complete dialog
box is displayed.
Page 23
Page 24
After you install the T2000 Web LCT, you need to check the
correctness of installation. Check directories and files as follows:
By default is C:\Web_LCT\jre.
By default is C:\Web_LCT.
By default is C:\Web_LCT\Tomcat .
Page 25
Contents
Page 26
Procedure
Page 27
By using DCN
1. Use a network cable to connect the computer where the
T2000 Web LCT resides to the DCN.
2. Connect one end of another network cable to the network
management interface on the front panel of the
equipment. Connect another end to the DCN.
Page 28
Contents
2.5 Configuration
Operations
Page 29
Contents
Configuration Operations
2.5.1 Logging In to an NE
2.5.9 Alarm
2.5.10 Performance
Page 30
Page 31
Page 32
Page 33
Step 5:Enter the User Name and the Password. Then, click OK.
Page 34
Page 35
Page 36
Page 37
The supported IF protection is 1+1 HSB, 1+1 SD, and 1+1 FD.
Create
IF protection
Page 38
Page 39
Page 40
You can set the following IF attributes by using the T2000 Web LCT:
working mode, link ID, IF port loopback, 2 Mbit/s wayside service,
and ATPC-related information.
Page 41
Page 42
By using the T2000 Web LCT, you can query and configure the
following RF attributes: transmit frequency, T/R spacing,
transmitted power, ODU manufacturer information, RF loopback
status, and ODU status.
Frequency attributes
Page 43
Page 44
Page 45
Page 46
Procedure
Step 1 In the NE Explorer, Configuration -> CrossConnection Configuration from the Function Tree.
Page 47
Page 48
Page 49
Procedure
Step 1 In the Cross-Connection Configuration window, click
Create SNCP. Enter the information of an SNCP service.
Page 50
Page 51
Page 52
Page 53
Page 54
By using the T2000 Web LCT, you can view the current and history
alarms, the reporting status of alarms for an NE and boards, and
abnormal events.
Page 55
Page 56
You can view the current and history performance data, UAT events,
threshold crossings, and performance monitoring status. You can set
the performance threshold and reset a board registry.
Page 57
You can set multiple protocol stacks, including the OSI, IP,
and HWECC.
Page 58
When the working mode is PDH, the configuration of onebyte DCC (D1-D1) rate is supported.
When the working mode is SDH, the configuration of D1-D3,
D4-D12, D1-D12, and D1-D1 is supported.
Page 59
Contents
1.
Introduction to Management
Systems
2.
3. Introduction to T2000
Page 60
Contents
Introduction to T2000
3.3 Configuration
Operations
Page 61
T2000 client
T2000 client
Page 62
Modular architecture
Page 63
Contents
Introduction to T2000
3.3 Configuration
Operations
Page 64
iManager T2000
Page 65
Contents
Introduction to T2000
3.3 Configuration
Operations
Page 66
Contents
Configuration Operations
3.3.2 Alarm
3.3.3 Performance
Page 67
The T2000 allows you to create a Microwave link. You can view the
networking on the Main Topology.
Step 1 On the Main Topology, right-click and choose Microwave link
from the shortcut menu. Enter the information of the Microwave
link.
Page 68
Page 69
Page 70
Page 71
Page 72
Page 73
Root alarm
Characteristics:
Page 74
Page 75
Page 76
T2000 Configuration
The T2000 and T2000 Web LCT are the same in terms of service
configuration, IF protection, IF and RF attributes, and
communications. Refer to the description in the T2000 Web LCT
part.
Page 77
Thank You
www.huawei.com
www.huawei.com