system and
energy management and control in
college laboratory
Presented by
Prof.A.C.Bhosale
Prof.N.M.Gaikwad
Content
Introduction
Inovativeness of the topic
Objective
Methodology
Relvance of the topic
Applicability of the Work
Budjet of the Project
Details of budjet Expenditure
Research plan
Introduction
The demand for trackers has expanded
significantly in recent years as more
reliable and costeffective solutions come
to market.
According to a recent study by
Transparency Market Research, the global
installed capacity for solar trackers is
estimated to reach almost 9 GW by 2020.
Solar energy is a very large, inexhaustible
source of energy.
Objective
To fabricate a DC motor control interfaced with
driver circuit.
To construct a model prototype solar cell
movement system with a mechanical assemble
to move the panel from 180 E to W.
To design an electronic circuit to sense the
intensity of light and to control DC motor driver
for the panel movement.
To construct an emergency light inverter circuit
i.e. to operate tube light with the help of
charged battery from the solar panel.
Methodology
The solar tracker system requires movement in
different directions, and uses electric motors as
prime mover, based on this; solar tracker system
motion control is simplified to an electric motor
motion control. In solar tracking system design, any
light sensitive device can be used as input sensor
unit to detect and track the sun position, based on
sensors readings, and generated sun tracking error,
the control unit generates the voltage used to
command the circuit to drive the motor, that
outputs the rotational displacement of electric
motor, which is the motion of solar tracking system.
Continue.....
Continue.....
B) Second Year:
v. To construct an emergency light inverter circuit
that is to operate tube light with the help of
charged battery from the solar panel.
vi. Design of circuitry for energy management of
solar tracker for single electronics device.
vii. Design of circuitry for energy management of
solar tracker for group electronics devices.
Viii.Designing control mechanism for solar energy
for single laboratory.
2nd Year
Total (in
rupees)
100,000
30,000
130,000
20, 000
20, 000
40,000
3. Other costs
20,000
20,000
40,000
4. Equipment
75000
75000
2,85,000/-
Recurring
1. Consumables
2. Travel
Research plan
A) First Year
i. Design and simulate solar tracker circuitry with help of simulation software
Proteus
Ii.construct a model prototype solar cell movement system with a mechanical
assembly assemble to move the panel from 180 E to W.
iii. To fabricate a DC motor control interfaced with driver circuit
iv. To design an electronic circuit to sense the intensity of light and to control DC
motor driver for the panel movement.
B) Second Year:
v. To construct an emergency light inverter circuit that is to operate tube light
with the help of charged battery from the solar panel.
vi. Design of circuitry for energy management of solar tracker for single
electronics device.
vii. Design of circuitry for energy management of solar tracker for group
electronics devices.
Viii.Designing control mechanism for solar energy for single laboratory.