00 IDU Introduction
Microwave Support Dept.
2013.3
>
Course Objective
Intended audience
Microwave technicians in Microwave project
>
The height of NR8120 V2.00 IDU is 1U, can be used at hub site or terminating site. NR812
0 V2.00 can interconnect with NR8250 V2.00 though radio port, to save investment, install
ation space and power consumption.
NR8120 V2.00 supports 1+0,1+1HSB/SD/FD 2(1+0) east to west configuration h
as most of the function of NR8250 V2.00 except XPIC, supports max 400Mbps for one freq
uency channel
ZTE Corporation. All rights
reserved.
>
IDU
Slot
nu
m
Boar
d
Type
RPUB
RPUB
RTEA
RMEA
RFAD
>
Board
Name
Description
Available
slots
RCMU
RCMUA
RTE
RTEA
Slot 2
RME
RMEA
Slot 3
RFA
RFAD
Slot 4
RPU
RPUB
Slot 5 & 6
Slot 1
The RTEA & RMEA boards is optional, and not support hot-swap. Before plugging
or unplugging the board, should power off the IDU and unplug the RCUMA board.
ZTE Corporation. All rights
reserved.
>
Logical
Slot
Transmission
Unit
TU module on RCMUA
RTU
RTEA
RTU
MU module on RCMUA
RMU
5/5*
RMEA
RMU
6/5*
RPUB (slot 6)
PM
RPUB (slot 5)
PM
10
10
RFAD
RFA
11
11
>
RCMUA Introduction
Interface
NMS
RJ45
GbE
RJ45
IF
LMT
Female TNC
RJ45
CLK IN/OUT
RJ45
MON0/1
RJ-45
EOW
3.5mm voice
connector
SC
RJ-45
EDI 1/2
RJ-45
OPWR
Power switch
Type
Description
NMS service interface
Provides 8 Gigabit Ethernet service interface: optical and
electrical optional, maximum 4 interface can be used at the same
time., each interface canbe optical or electrical .
Input /output interface of IF signals (modem unit IF interface)
Local management interface
The service channel delivers users special traffic through an RJ45 connector.
External alarm interface, EDI1 supports 4 input, EDI2 supports 2
output
ODU power switch
>
RTEA Introduction
>
RMEA Introduction
>
RFAD Introduction
Driving 2 fans
Supports temperature detection and fan speed
adaptive control
10
>
RPUB Introduction
11
www.zte.com.cn