TROUBLESHOOTING STEPS
FOR SITE ENGINEERS
Scope of Presentation:
Commissioning of BTS CC card in Pre-swap
Software Version up-gradation Methods
Follow steps on Configuration Diagram in LMT
Troubleshoot the alarms one-by-one
Commissioning of CC card
First of all, confirm that you have required version of
LMT(LMT_v12.13.43P02_GUL)
Commissioning of CC card
After that you must apply setting to you laptop LAN IP like following.
Commissioning of CC card
Now open EOMS file from LMT as mentioned below.
Commissioning of CC card
EOMS will open a windows like below then select Image and burn and press OK
Commissioning of CC card
It will ask for selection of RADIO MODE, select MULTIMODE
Commissioning of CC card
Select PATCH Directory & Commissioning File then press OK
Commissioning of CC card
After that LMT will start the process of image burning.
Commissioning of CC card
It will take a while
10
Commissioning of CC card
Burning/MO file Succeeded
when it will be succeeded the display shows
11
12
13
14
Commissioning of CC Card
After completed process & reset of CC board, you can login
again in EOMS and you can see the following window. It would
show you the topology.
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
Questions
In Live BTS, if GSM (2G) is down, UMTS (3G) will effect
of not?
In the worst scenario, if you have to edit the MO file on
site, how you will do it?
THANK YOU
39