Why WirelessHART?
What is WirelessHART?
Coexistence with WLAN
WirelessHART hardware
PDM MDS OPC
Reading out process variables
Presales support
Links to Siemens WirelessHART
Pressure
WirelessHART
WirelessHART adapter
Positioner
temperature Mashing
Lautering
Temperature GSM
Wireless Brew kettles
Fermentation HART
WirelessHART
pressure
Heat
exchangers
GPRS
Yeast
Propagation Aging &
Storage Industrial Wireless
WirelessHART
Filtration Wireless LAN WAN
Link
EDGE
IWLAN
Machine vision
..
Proximity switch
SC Organization Firewall
Product portfolio
VoIP
Foremans Office
WAN
Nivel de campo Vision
EGE; GPRS; GSM Firewall Firewall
Segmentation
Machine
Firewall
Plant Block
Cell
For internal use only / Siemens AG 2010. All Rights Reserved.
Robotica Maquinas Automatizacin de Fabrica Automatizacin de procesos
Page 7 2010-07-29 Industry Sector
Siemens Industrial Wireless solution
Maintenance-friendly
No cable wear, no constant maintenance costs
Provides valuable diagnostic information for efficient predictive
maintenance
Siemens AG 2010. All Rights Reserved.
Page 10 2010-07-29 Industry Sector
IE/WSN-PA Link & SCALANCE W Refresher
Workshops 2010
Why WirelessHART?
What is WirelessHART?
Coexistence with WLAN
WirelessHART hardware
PDM MDS OPC
Reading out process variables
Presales support
Links to Siemens WirelessHART
Why
WirelessHART?
Purpose of WirelessHART
What is Network for wireless transmission of process data
WirelessHART?
Making diagnostic information available
Coexistence with
WLAN
WirelessHART
hardware Properties of WirelessHART
PDM MDS OPC Meshed, self-organizing network
Reading out
process variables IE/WSN-PA Link (gateway) is the central point of the network
Presales support Relatively low data rates
Links to Siemens
WirelessHART
Highly integrated security (cannot be disabled!)
Why
WirelessHART?
Based on IEEE 802.15.4 (defines layer 1 and 2 of the OSI model)
What is WirelessHART operates in the unlicensed ISM band; 2.4 GHz
WirelessHART?
(remember the wireless approvals of the relevant country!)
Coexistence with
WLAN Rugged chipping sequence based transmission with dynamic
WirelessHART channel selection (Direct Sequence Spread Spectrum - DSSS)
hardware
PDM MDS OPC
16 non-overlapping channels (channel 11 to channel 26)
Reading out
(channel spacing and numbers are NOT identical to WLAN
process variables IEEE 802.11b/g!)
Presales support
2 MHz bandwidth per channel, channel spacing 5 MHz
Links to Siemens
WirelessHART Data rate: 250 Kbit/s gross
WirelessHART is NOT deterministic!
Transmit power: max. 10 dBm (10 mW)
Why
WirelessHART?
Distance between two wireless stations under "laboratory
What is
conditions"
WirelessHART?
up to 250 m (line of sight) outdoors
Coexistence with
WLAN
(max. 100 m for good intermeshing recommended)
WirelessHART up to 50 m (depending on obstacles) indoors
hardware
(max. 30 m for good intermeshing recommended)
PDM MDS OPC
Reading out
Max number of field devices: 100
process variables
Security: 128 Bit AES (always active!)
Presales support
200 m 200 m ...
Links to Siemens
WirelessHART
Why
WirelessHART?
Distances are to large and the field devices are arranged in a
What is
unfavorable order
WirelessHART?
No redundant radio links
Coexistence with
WLAN If one field device fails in the line all other field devices are not
WirelessHART connected to the Link as well
hardware
PDM MDS OPC
Reading out
process variables
Presales support
Links to Siemens
WirelessHART
O
Battery low!
Why
WirelessHART?
The Link is placed at the periphery of the network
What is Due to this a single point of failure can part the whole network
WirelessHART?
Coexistence with
WLAN
WirelessHART
hardware
PDM MDS OPC
Reading out
process variables
Presales support
Links to Siemens
WirelessHART
Battery low!
O
Siemens AG 2010. All Rights Reserved.
Page 16 2010-07-29 Industry Sector
Excursus to Meshed Networks
Example 3 well meshed Network
Why
WirelessHART?
The Link is placed in the center of the network
What is There is always a redundant connection to the Link
WirelessHART?
Coexistence with
WLAN
WirelessHART
hardware
PDM MDS OPC
Reading out Battery low!
process variables
Presales support
Links to Siemens
WirelessHART
P
Siemens AG 2010. All Rights Reserved.
Page 17 2010-07-29 Industry Sector
Comparison of WirelessHART and WLAN
Why
WirelessHART?
WirelessHART Wireless LAN (IEEE 802.11)
What is Aim: Querying process and Aim: Transparent data
WirelessHART?
diagnostic data from sensors transmission (PNIO,
Coexistence with
WLAN
in the process industry TCP/IP, ...)
WirelessHART Low data rates High data rates
hardware
250 Kbit/s gross currently up to 54 Mbit/s gross
PDM MDS OPC
Reading out
High latency, Low latency,
process variables up to several seconds down to 16 ms PNIO possible
Presales support
High resistance to interference Lower resistance to
Links to Siemens
WirelessHART with FHSS interference
Field devices optimized for Developed for network
battery operation operation
High security default setting High security can be set
Self-building mesh
Simplified commissioning
Automatic features Mesh
45
3
MSG MSG 34
MSG 1 2
Link Battery low!
3
2
Initial route
Alternative route
Alternative route
Wireless node
For internal use only / Siemens AG 2010. All Rights Reserved.
Page 20 2010-07-29 Industry Sector
IE/WSN-PA Link & SCALANCE W Refresher
Workshops 2010
Why WirelessHART?
What is WirelessHART?
Coexistence with WLAN
WirelessHART hardware
PDM MDS OPC
Reading out process variables
Presales support
Links to Siemens WirelessHART
Why
WirelessHART?
Example: WirelessHART Link with wireless connection to
What is
control room
WirelessHART?
Coexistence with
WLAN
WirelessHART WirelessHART
hardware 2.4 GHz
PDM MDS OPC
Reading out
process variables
Wireless LAN
Presales support
5 GHz
Links to Siemens
WirelessHART
Why WirelessHART?
What is WirelessHART?
Coexistence with WLAN
WirelessHART hardware
PDM MDS OPC
Reading out process variables
Presales support
Links to Siemens WirelessHART
Why
WirelessHART? SITRANS TF280 SITRANS P280
WirelessHART WirelessHART
What is
WirelessHART? temperature transmitter pressure transmitter
Coexistence with
WLAN
WirelessHART
hardware
PDM MDS OPC
Reading out
process variables
Presales support
SITRANS AW200 IE/WSN-PA Link
WirelessHART adapter WirelessHART gateway
Links to Siemens
WirelessHART
Support burst mode and event notification for adapter and sub devices
Even with only one HART-FD linked to the AW200 multidrop mode can be
used minimizes current consumption
For internal use only / Siemens AG 2010. All Rights Reserved.
Page 36 2010-07-29 Industry Sector
SITRANS AW200 features
Why
WirelessHART?
List of the field devices
What is
supported by the AW200
WirelessHART?
Source: Siemens catalog FI 01
Coexistence with
WLAN
2010, section 09
WirelessHART
hardware
PDM MDS OPC
Reading out
process variables
Presales support
Links to Siemens
WirelessHART
Simple host system connection to Simatic system and 3rd party system
Installation in Zone 2
Housing in IP 65
Why
WirelessHART?
What is
WirelessHART?
Coexistence with
WLAN
WirelessHART
hardware
PDM MDS OPC
Reading out
process variables
Presales support
Links to Siemens
Diagnostics Check the communication status, client/server parameters etc.
WirelessHART
Monitor Customized Web pages for monitoring the data of the field
devices
6GK5 798-2LP00-2AA6
6GK5 798-0CP00-1AA0
6GK1411-6CA40-0BA0 6GK1411-6CA40-0AA0
Why WirelessHART?
What is WirelessHART?
Coexistence with WLAN
WirelessHART hardware
PDM MDS OPC
Reading out process variables
Presales support
Links to Siemens WirelessHART
Why
WirelessHART?
SIMATIC PDM is required to commission the WirelessHART
What is
adapter AW200
WirelessHART?
with HART modem RS-232
Coexistence with
WLAN or with HART modem USB
WirelessHART
hardware
PDM MDS OPC
Reading out
process variables
Presales support
Links to Siemens
WirelessHART
Why
WirelessHART?
Content of the supplied CD
What is SITRANS MDS
WirelessHART?
Hotfix for SIMATIC PDM
Coexistence with
WLAN HART OPC server
WirelessHART
hardware
PDM MDS OPC
Reading out
process variables
Presales support
Links to Siemens
WirelessHART
Why
WirelessHART?
What is
WirelessHART?
Coexistence with
WLAN
Freeware! 1)
WirelessHART
hardware
PDM MDS OPC
Reading out
process variables 1) During the market introduction
Presales support phase of WirelessHART products,
it is free of charge for customers.
Links to Siemens Ships with the IE/WSN-PA Link,
WirelessHART single purchase possible for
promotion use under order number
7MP2910-0AA00-0AA0
HART OPC
Server
Uses SIMATIC PDM and the HART
OPC server to obtain diagnostic data
RIO without
English and German language HART support
selectable 4-20 mA
HART HART
device device
Wired network
View all the operating history United tab columned form view
with time stamp Identification
Details
Easy and simple Diagnostics
operation Maintenance order
Device list shown in a
tree view History
Why
WirelessHART?
The HART OPC server makes a standardized OPC interface
What is
available for HART-compliant field devices
WirelessHART?
Coexistence with
WLAN
PDM
SCADA
WirelessHART MDS
hardware
PDM MDS OPC
Optional
Reading out
process variables HART OPC
server
Presales support
Links to Siemens
WirelessHART
Why WirelessHART?
What is WirelessHART?
Coexistence with WLAN
WirelessHART hardware
PDM MDS OPC
Reading out process variables
Presales support
Links to Siemens WirelessHART
Why
WirelessHART?
There are various ways of accessing the process variables
What is via the Web interface of the Link
WirelessHART?
Coexistence with
WLAN
WirelessHART PMD with MDS and HART OPC server (no Modbus blocks
hardware
necessary!) (see above)
PDM MDS OPC
Reading out
process variables
Presales support CPU with Modbus blocks (e.g. with PCS 7 or WinCC)
Links to Siemens
WirelessHART
Why
WirelessHART?
Paths for reading out variables
What is Monitor > Explorer
WirelessHART?
Trend > Graph
Coexistence with
WLAN
WirelessHART
hardware
PDM MDS OPC
Reading out
process variables
Presales support
Links to Siemens
WirelessHART
Why
WirelessHART?
Link only provides the Modbus TCP/IP protocol
What is This makes WirelessHART communication blocks necessary for
WirelessHART?
communication with PCS 7 or WinCC
Coexistence with
WLAN
WirelessHART SIMATIC PCS 7 engineering station
hardware & SIMATIC PDM Server PCS 7 operator station
SIMATIC
PDM MDS OPC
PDM
Reading out
process variables
Presales support S7-400
Why WirelessHART?
What is WirelessHART?
Coexistence with WLAN
WirelessHART hardware
PDM MDS OPC
Reading out process variables
Presales support
Links to Siemens WirelessHART
Why WirelessHART?
What is WirelessHART?
Coexistence with WLAN
WirelessHART hardware
PDM MDS OPC
Reading out process variables
Presales support
Links to Siemens WirelessHART