AGENDA
Login Process
Application Unlock
Branch/Teller Disabling
The registration process is used to capture the FPV of the teller. From this
FPV, the minutiae extract is captured and stored in database for matching
and identification process during login.
1/
WHO CAN REGISTER AND APPROVE?
2/
ENROLLMENT BY MAKER
The enrollment is
carried out by users
of type 40 or 50 or
60 (Maker).
BMA
Authentication/BMA
Registration
Click on Enable
Branch. It’s one
time activity.
3/
BMA REGISTRATION SCREEN DESCRIPTION
Click on Get Tellers.
Then list of Teller will be
display. For display
more tellers Click on
More.
Note: At the beginning the grid is empty. Only after a given branch has been biometric enabled, any tellers for that branch
can be registered. The “Enable Branch” becomes active after clicking on Enable Branch. Once the branch is enabled, the
“Register a Teller” button becomes active to register tellers.
4/
BMA REGISTRATION
The respective
teller enters
his/her CBS
Password in the
“Password
Textbox”
After successfully
verifying the Teller
ID and password
system will prompt
the message to
click on Enroll
button click on OK
then Enroll button
will be enable.
6/
CAPTURE IN PROGRESS…
7/
PUT THE RESPECTIVE FINGER ON THE FINGERPRINT DEVICE
Every finger has to
capture three times
to get the best
quality of that finger.
As soon as the
capture is completed
of the finger, the
check mark above
the hand image will
get checked.
After successfully
capturing all three
attempt for the
finger the arrow will
move to next finger
teller need to click
on “Capture” button
to capture that
finger.
8/
SKIP PARTICULAR FINGER
If there is any
problem in any
finger you can skip
that particular finger
by clicking on the
“Next” button.
9/
SKIP PARTICULAR FINGER
10 /
ENROLMENT
If Any finger which is
not captured due to
some reason will
show on the screen
as X mark above that
finger as shown in
the figure.
Click on the
“Submit” to enroll
the Teller
11 /
SUCCESSFUL ENROLMENT
After successful enrollment of the respective teller, a success message will display as
shown in the figure above.
12 /
AUTHORIZATION BY CHECKER
The authorization
will be carried out by
users of type 40, 50,
60(Checker).
BMA Authentication
/ BMA Authorization.
Click on “Start
Authorize”.
13 /
ON CLICK ON THE SPECIFIED OPTION, A POP-UP IS SHOWN
DISPLAYING THE GRID OF TELLERS TO BE AUTHORIZED.
Select a particular teller and
click on Capture Teller
Biometric to capture the
teller’s finger. Now click on
the Capture Checker
Biometric to capture the
checker’s finger.
After successful capturing of
both Teller and Checker’s
finger click on the approve
button to authorize the
selected teller.
If both teller’s as well as
checker’s biometric is
correct, the selected teller
will get approved and a
successful message will
display at the top of the
screen. Otherwise either
teller’s biometric mismatch
message or checker’s
biometric mismatch will be
displayed.
14 /
ENABLE TELLER
The teller enablement is
carried out by users of
type 40, 50, 60.
BMA Authentication /
BMA Enable.
15 /
FIRST TELLER REGISTRATION
When the branch is biometrically enabled, then the maker needs to register the first teller of the branch.
So, for the first time registration, the teller needs to follow the following steps.
They need to enroll themselves from the session of some other teller.
Then they need to login to b@ncslink and self-authorize themselves.
Then they need to ask some other teller to enable themselves .
Then they can login to their system using the biometric approach.
Once the enrollment procedure for the teller is completed, the teller can login into the B@NCS link application using
biometric login.
On the login screen, the teller enters his/her user ID, Password, home branch number and terminal number required for login
and clicks on “Transmit” button.
On click of “Transmit button” a new screen is displayed asking user to provide any of their finger as show in the figure.
If the appropriate user provides the correct finger (one of the registered fingers), then they are logged in to b@ncslink.
Else if they provide wrong finger (for e.g. some other user tries to provide their finger or the user provides an unregistered
finger), then an error message is shown displaying “Biometric mismatch. Please check the user id and try login again.”
16 /
Login Process
17 /
Application Unlock
If the teller is biometric enabled, teller will get a biometric lock screen if the Bancslink application is idle for
more than 3 min or the user clicks on “lock” button in the toolbar.
A screen is displayed which contains a Text Box field for password and “submit” button.
To unlock the screen, the teller needs to entered his/her password and click on “Submit” button.
The same screen will displayed which appears at the time of login. So the teller needs to follow the same
steps to unlock their screen.
If the teller presses his/her right finger then the application will be unlocked. Else the same screen is
displayed again and the user needs to follow the same process again. The screen will not be unlocked until
the user presses the right finger.
18 /
BRANCH/TELLER DISABLING
The Branch / Teller
disabling is carried out
by users of type
Parameter teller
BMA Authentication /
BMA Disable.
19 /
BRANCH/TELLER DISABLING
To disable that Branch,
teller needs to select a
row from the grid and
then click on “Disable
Branch” button. This
would biometrically
disable the branch
20 /
Modify Registration
In the modification
process the teller
biometric needs to be
captured again and
entire process will be
same as enrollment
process.
Maker need to go to
menu option BMA
Authentication / BMA
Registration
21 /
Modify Registration
Then, User needs to
click on “Get Tellers”
button. A grid
containing teller
information shall be
displayed to the user
The re- enrollment
would be carried out by
users of type 40 or 50 or
60 (Maker).
22 /
CAPTURE EXISTING FINGER
In case of Modify Registration, you have to first give anyone of your enrolled finger by
clicking on the “Capture Existing Finger” and then give the finger as while enrollment.
23 /
24 /