Transmission
GROUP Members Univ. Roll:
Pankaj Kumar 11501615030
Md Sarfraz 11501615027
Dipayan Chakroborty 11501616009
Moinul Hassan 11501615028
INTRODUCTION
▷ Wireless Power Transmission (WPT) is the efficient
transmission of electric power from one point to another
trough vacuum or an atmosphere without the use of wire or
any other substance.
▷ The power can be transmitted using Inductive coupling for
short range & Resonant Induction for mid-range applications.
▷ The objective of this project is to design and construct a
method to transmit wireless electrical power through space
and charge a designated low power device.
▷ The system will work by using resonant coils to transmit
power from an AC line to a resistive load.
▷ The objective also includes the prospect of charging multiple
low power devices simultaneously using a single source which
would use a single power outlet.
2
Block Diagram
3
Transmitter Circuit
The AC source voltage supplies the ac voltage at input of the coil. But before directly
applying it to the coil a high frequency transformation is performed by which the frequency
gets increased from 50hz to several khz. This is effectively done in order to achieve long
distance and to reduce the power consumption. This frequency transformation is done by
using switching devices by which alternately the devices can be made to generate the pulses
and given as input to transmitting inductor (primary coil) & the voltage flow through this coil is
in the form of electromagnetic waves which is then transmitted towards receiving
inductor(secondary coil).
4
Receiver Circuit
The receiving inductor (secondary coil) is used to receive the electromagnetic waves
which produce the voltage inside the coil which is in AC form. This voltage passed
through rectifier & filter circuitry which converts the AC voltage in DC form & removes the
unwanted contents using filter. This circuit used to provide smooth DC voltage. The
received voltage may be in unregulated form which must be regulated using Voltage
regulator so at the output we get regulated DC voltage. This regulated voltage is then
given to the load which drives it.
5
Applications
▷ Wirelss charging of Smart Phones,
Portable Media Players, Digital
Cameras and Tablets etc.
6
Time-chart
Start Date End Date Description Duration % Done
(Days)
7
Bibiliography
▷ https://www.google.co.in/
▷ https://www.researchgate.net/
8
Thanks!