Samsung Electronics
Visual Display Div. R&D team
Contents
1. GALAXY (703~706MS) 10. Main PBA
Instruction
11. Video PCB
2. Specification
12. Disassembly
3. Connection of 703~706MS
13. EDID Installation
4. Signal Pin Assignments
14. After Release…
5. Display Mode
6. Timing chart
7. Block Diagram
8. GALAXY Feature
9. Troubleshooting
1. GALAXY(703~706MS) instruction
2. Specification Product Outline
703 MS / 704 MS
2. Specification Product Outline
705 MS / 706 MS
3. Connection of GALAXY(703~706MS)
4. Signal Connections and Pin Assignments
If the monitor signal cable is disconnected, the monitor starts the ‘Self-Test’ function
Check Micom(IC201)
9. Troubleshooting
9-21 Shut Down Failure
9. Troubleshooting
9-22 Miss Color Failure
9. Troubleshooting
9-23 Visible Retrace Failure
9. Troubleshooting
9-24 Unsynchronized Image Failure
9. Troubleshooting
9-25 Mis-convergence Failure
9. Troubleshooting
9-26 Poor Focus Failure
9. Troubleshooting
9-27 Purity Failure
10. Main PBA
11. Video PBA
STV 9268
PRE / OSD AMP
12. Disassembly(1)
1. Disassembly stand on the flat desk.
2. Before disassembly set , separate Signal Cable with Power cord.
Disassembly(2)
Disassembly(3)
Disassembly(4)
Reassembly(5)
13. EDID input method
After exchange the Main Board, We use the DDC control JIG and must complete downloading.
1. execute “DDC21.exe”
2. Click “LOAD FILE”
3. Input the File Name
-. “SM703MS.ddc”
(KS17GXK)
-. “SM705MS.ddc”
(KS17GXJ)
Error Massage
: Check the Signal Cable or
Interface Board
EDID input method(Windows Program)
1.Execute Winddc.exe
3 Program at PC.
2. Cilck the Winddc icon.
3. File open.
4. Select Port#1
5. Load DDC file
4 File Name
“SM703MS.ddc”
(KS17GXK)
“SM705MS.ddc”
(KS17GXJ)
6. Click Next(OK) button.
5
6
EDID input method (Windows Program)
7. Select enter button
After Monitor S/N input.
If monitor is dual
monitor, the digital both
must input with the
analog.
14. After exchange the Main PBA, confirm below items.
You have to
EDID input (Analog and Digital)
Factory Reset
-.setting to Contrast and Brightness ‘0’.
-.Push the menu button more than 5 seconds
-.select Reset.
Thank You!