MACHINING
CANDIDATE:
G.MAHARAJAN
REG. No: 721916114318
N.SREEHARI
REG. No:721916114168
B.MELWIN SAMUEL
REG. No:721916114321
GUIDE:
PROFESSOR.
MR.CHANDRASEKARAN
DEPARTMENT OF MECHANICAL ENGINEERING
DHANALAKSHMI SRINIVASAN COLLEGE OF ENGINEERING,
COIMBATORE
OBJECTIVE
2
3
ABSTRACT
This project deals with design and fabrication of
“CAM VICE ” which works in the principle of
eccentric cam mechanism.
The main features of the cam vice are, holding
irregular jobs, more rigidity, reduces fatigue.
Cam was designed to hold the job at high
pressure.
The other parts were designed to hold the job in
rigid condition. This Cam vice is suitable for mass
production. It is possible to hold irregular
components also, and similar components can be
very quickly
4
INTRODUCTION
Cam vice is operated by the eccentric cam
mechanism. There is a cam lever, the job can be held
tightly in between the jaws.
There is a cam lever, the job can be held tightly in
between the jaws. In this, first the job is place in
between jaws, and movable jaw, and movable jaw is
adjusted by adjusting the screw rod to maintain
according to the eccentricity of the cam with the cam
profile.
After that, cam lever at the top is operated so that
the job is held tightly in the fixture.
This type of fixture is useful for mass production
where only similar size of jobs is to be held5
APPLICATIONS OF ECCENTRIC CAM
VICE
The following are the major applications
8
ADVANTAGES OF ECCENTRIC
CAM VICE
Idle time of the machine is reduced.
When compared with the mechanical vices, it consumes
less time for clamping and unclamping the job.
It reduces the manual labour, hence production rate is
higher.
In this mechanism there is no backlash.
9
DISADVANTAGES OF
ECCENTRIC CAM VICE
Initial higher cost.
Hand operated vice.
10
WORK MATERIAL
DIMENSIONS
11
All dimensions are in mm
12
13