Trust’s
S. G. BALEKUNDRI INSTITUTE OF TECHNOLOGY, BELAGAVI
Department of Computer Science and Engineering
2
Hardware Requirements
• RFID Tag • Capacitor 1000μF
• RFID reader • Regulator 7812,7805
• ARM7 LPC 2148 • Buffer IC 4050
• GSM Modem • Driver IC 2003
• GLCD • Relay 12V
• Transformer
• Buzzer
• Diode 4148
• Gtag or Serial port
• LED
3
Software Requirements
Keil Software μVision 4 [ to save, build and
rebuild embedded c code]
Flash Magic [to dump the code into ARM7
Microcontroller]
4
Implementation
Serial Number
Governor Name
Denomination
RFID
Card reader machine number TAG
Last operated date,timestamp
ARM GSM
READER PROCESSOR MODEM
TIMER BUZZER
6
Workflow
GLCD to ARM7 connection
Pin 4 P0.11 Register select
Pin 5 P0.12 Read/write
Pin 7 P0.22
Pin 8 P0.21
Pin 9 P0.20
Pin 10 P0.19 Databuses
Pin 11 P0.18
Pin 12 P0.17
Pin 13 P0.16
Pin 14 P0.15
Pin 17 P0.13 Chip selection 1
8
RFID READER TO ARM7
CONNECTION
9
Working
The data like denomination, serial number, governor name is
stored in the ARM7 Microcontroller corresponding to the
RFID tag.
The RFID tag is scanned using RFID reader.
Once it is scanned the data corresponding to RFID tag is
displayed on GLCD.
After 5 mins of time duration if the same RFID tag is
scanned then the GLCD displays the message as BLACK
MONEY.
And at the same time Buzzer occurs alarming the retailer.
Remaining Work
Generation of SMS after detecting black money.
Buzzer when black money is detected.
THANK YOU
12