PC IP Configuration Guide
(Windows XP SP2)
Configure PC IP
• Configure PC IP address
Page 3
Configure PC IP
• Configure PC IP address
Page 4
Configure PC IP
• Configure PC IP address
Page 5
Configure PC IP
• Configure PC IP address
Configure IP address:
129.9.XX.XX. The
address can’t same with
Equipment’s IP.
Page 6
NE Login and Board Configure
(RTN 600 V1R2)
NE Login
PC connect with NE (RTN 600)
• RTN 620
ETH
ETH
Laptop
Page 8
NE Login
Start WEBLCT
Double-click the T2000 Web LCT shortcut icon on the desktop to launch the T2000 Web LCT.
The User Login screen is displayed. Enter the user name and password. Click Login.
Page 9
NE Login
Search NE
Searched NE li
③
④
Page 10
NE Login
All available NE will be added on the
screen.
Add NE Communication Status
should be normal.
Page 11
NE Login
NE Login
Page 12
NE Login
Login NE
User name: lct
Password: password.
Page 13
Configure NE
Start to Configure NE
②
Page 14
Configure NE
Change NE ID
①
Configure NE name.
Page 15
Configure NE
Re-login NE
② ③
Page 16
Configure NE
Configure board
The color of
created board is
① green,
③
Page 17
Configure NE
Configure board • Right click on the board then pressed
“ADD”.
Method 1: Added one by one. • PXC Card should be installed FIRST.
①
③
Page 18
1+1 HSB-FD-SD
Commissioning
Basic Knowledge
• 1+1 Configuration
For RTN 620, the paired slots (slot5 and slot7) consist a 1+1 protection group; the paired
slots (slot6 and slot8) consist another 1+1 protection group.
Slot 5 and slot 6 is main slot respectively.
For 1+1 HSB and SD application, It is only necessary to configure main IF board parameters.
Page 20
Basic Knowledge
• Trigger Conditions of the automatic HSB switching
Switching Conditions Description
The hardware of the IF board is faulty.
The hardware of the ODU is faulty.
POWER_FAIL
VOLT_LOS ( IF Board )
RADIO_TSL_HIGH
RADIO_TSL_LOW
RADIO_RSL_HIGH
At the same priority.
IF_INPWR_ABN
CONFIG_NOSUPPORT
R_LOC
R_LOF
R_LOS
MW_LOF
The IF connection cable is faulty.
Page 21
Basic Knowledge
• Trigger Conditions of the automatic HSM switching
Page 22
Basic Knowledge
• Hybrid Coupler with Waveguide Interface
Page 23
Basic Knowledge
• Trigger Conditions and Antenna Aligning
While aligning antennas, the microwave link is not stable, will create these alarms.
In order to finish antennas aligning quickly, for 1+1 application, we suggest turn off the
standby IF ODU-PWR switch at first, after antenna aligning finishing, turn on the standby IF
ODU-PWR.
Page 24
Basic Knowledge
• 1+1 HSB/FD/SD Compare
Page 25
CONTENT
• Basic Knowledge
• 1+1 HSB
• 1+1 FD
• 1+1 SD
1+1 HSB Commissioning
• 1+1 HSB Commissioning Steps
Turn on Standby IF
1+1 Switch State
ODU-PWR
and Test
Switch
Page 27
1+1 HSB Commissioning
• Link 1+1 Configure
③
①
To Next Page
Page 28
1+1 HSB Commissioning
• Link 1+1 Configure
Page 29
1+1 HSB Commissioning
• IP Parameters Configure For 1+1 HSB, only configure main IF board
parameters.
③
①
Page 30
1+1 HSB Commissioning
• Query 1+1 HSB Switch State Switch State
① ③
Page 31
1+1 HSB Commissioning
• 1+1 Switch Control
① ③
④ Right Click
Page 32
CONTENT
• Basic Knowledge
• 1+1 HSB
• 1+1 FD
• 1+1 SD
1+1 FD Commissioning
• 1+1 FD Commissioning Steps
Turn on Standby IF
1+1 Switch State
ODU-PWR
and Test
Switch
Page 34
1+1 FD Commissioning
• Link 1+1 Configure
Page 35
1+1 FD Commissioning
• IF Parameters Configure
① ③
④
⑤
⑥ ⑦
Page 36
1+1 FD Commissioning
• IF Parameters Configure
① ③
④
⑤
⑥ ⑦
Page 37
CONTENT
• Basic Knowledge
• 1+1 HSB
• 1+1 FD
• 1+1 SD
1+1 SD Commissioning
• 1+1 SD Commissioning Steps
Turn on Standby IF
Align Standby
ODU-PWR
Antenna
Switch
Page 39
1+1 SD Commissioning
• 1+1 Link Configure
Page 40
1+1 SD Commissioning
• Parameters Configure For 1+1 SD, only configure main IF board
parameters.
③
①
Page 41
1+1 SD Commissioning
Turn off two side standby ODU's power, turn on two main ODU's power, firstly, align two
main antennas.
Page 42
1+1 SD Commissioning
Turn on local site standby ODU's power, keep opposite site main antenna fixed, align local
standby antenna towards opposite main one.
Page 43
1+1 SD Commissioning
Turn on opposite standby ODU's power, keep local main antenna fixed, align opposite
standby antenna towards local main one.
Page 44