configuration
www.huawei.com
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page2
Objectives
Upon completion of this course, you will be able to:
Data configuration process Introduction
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page3
Contents
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page4
Data Configuration Flow
Hardware data
Rack data
Subrack data
Board data
Local data
Interworking data
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page5
Hardware Configuration Process
Start
End
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page6
Reference Relationships Between
Hardware Data
Key parameters: ADD RACK
[Rack number]
[Location name ]
Position number .......
Slot number:
ADD SUBRACK
physical type
[Rack number]
[Position number]
– UPB0 (Hardware R2) .......
ADD BRD
[Rack number]
[Position number]
[Slot number]
.......
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page7
Contents
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page8
Parent-Child Relationships
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page9
Local Data Configuration Process
End
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page10
ADD ME
Command Function:Used to add management element, define
management element in OMS2600
Parameter:
ME type :CCF
ME version: the version is consistent with the inquiry result through LST
VERINFO
Example:
ADD ME: DMID=1, SNID=0, MEID=100, MENAME="CCF",
METYPE=CCF, MEVER="V300R002C67", MEVD="HUAWEI",
MELN="ccf";
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page11
ADD ME (Cont.)
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page12
ADD Module
Parameter:
Module type: CCF
Example:
ADD MODULE: MID=1, MT=CCF, RN1=0, PN1=0, SN1=10,
RN2=0, PN2=0, SN2=12, MNAME="CCF01";
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page13
ADD Module (Cont.)
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page14
ADD CCF
Parameter:
CCF ID: It identifies a CCF entity, so that other data table can
quote the CCF entity easily. It is always set to 1.
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page15
ADD CCF (Cont.)
DST: It specifies whether the system displays the daylight
saving time (DST)
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page16
ADD AP
Command Function: add an access point. Different access
points correspond to different CDR processing policies.
Parameter:
Access point ID: only two access points can be configured
IMS NE
IP Centrex
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page17
ADD AP (Cont.)
Example:
ADD AP: CCFID=1, APID=1, PTTYPE=TCP, REALM=“ims2.com”,
LOCIDT=ccf.ims2.com,NETTYPE=“CORE";
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page18
ADD PROCESSOR
Command Function:
Add a CDR processing object.
Define the strategy for processing original CDRs.
Parameter:
CDR processing ID:
It identifies a CDR processing, so that other objects can quote it
FMTDLL=IMS_R8;
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page19
ADD PROCESSOR (Cont.)
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page20
ADD CDRBRW
Command Function: Add a CDR console and define
parameters for browsing CDRs.
Parameter:
Local IP address
Example:
ADD CDRBRW: CCFID=1, CBID=1, LITMC="180.1.2.80";
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page21
ADD CDRBRW (Cont.)
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page22
ADD SCP
Command Function: Add a system configuration parameter
for system configuration.
Parameter:
System configuration parameter (SYSPARAM)
Example:
ADD SCP: SYSCP=SYSPARAM, RUNMODE=Cluster,
MEDIUMMTH=DRBD, INSTTYPE=FirstInstall;
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page23
ADD SCP (Cont.)
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page24
ADD NICCONF
Command Function: Add network interface configuration for IP
address and mask of Back network port.
Parameter:
Interface type:
Bf: An interface for offline charging on the IMS network.
Example:
ADD NICCONF: ITEMID=1, ITFACTYPE=Rf, NIC=Back7,
IP="191.1.4.80", GATEWAY="191.1.1.1";
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page25
ADD NICCONF (Cont.)
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page26
ADD ORGDATA _Optional
Command Function: Add an original CDR object and define
related information on original CDRs
Parameter:
Size of original CDR file
Compression algorithm
Example:
ADD ORGDATA: CCFID=1, APID=1, ORGID=1;
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page27
ADD ORGDATA _Optional (Cont.)
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page28
ADD FINALDATA _Optional
Command Function:Add final CDR, and specify the patch
of final files.
Parameter:
Max. time to generate final CDR
Prefix of final CDR file name
Time point for generating CDR file
Example:
ADD FINALDATA: CCFID=1, APID=1, FINID=1,
BSPN="3gpp_r6_patch";
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page29
ADD FINALDATA _Optional (Cont.)
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page30
Reference Relationships Between
ADD CCF
ADD AP
[CCF ID]
[AP ID]
...
ADD ORGDATA
[CCF ID]
[AP ID]
...
ADD FINALDATA
[CCFID]
[AP ID]
...
ADD PROCESSOR
[CCF ID]
[AP ID]
...
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page31
What’s Channel
Final CDR will be classified into different channel.
The same type of final CDR will be stored in the
same channel.
Channel:
ATS-CDR
ICSCF-CDR
MGCF-CDR
SCSCF-CDR
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page32
ADD CHANNEL _Optional
Command Function:
add a channel record and related parameter information in the
configuration database.
Parameter:
Channel ID : It specifies a channel ID in the CCF configuration
database.
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page33
ADD CHANNEL _Optional (Cont.)
Example:
ADD CHANNEL: CCFID=1, APID=1, FINID=1, CHLID=1,
BACKUP=NO;
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page34
ADD CDR Customization _Optional
add a CDR Customization record and related parameters to
the configuration database
ADD CDRCUSTOM: CCFID=1, APID=1, FINID=1, CHLID=1,
FIELDNAME="CalledPartyAddress";
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page35
ADD Backup _Optional
add a backup universal configuration record and related
parameter information in the configuration database.
ADD BACKUP: CCFID=1, BKID=1, BANAME="backuptest",
SRCDIR="/var/backsave/R6/default", DSTDIR="/var/ggtest",
DSHTIP="127.0.0.1", LOCIP="10.71.155.125", FPOLID=0;
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page36
ADD ISM
Command Function:
add a disk array and related parameter information in the configuration
database.
Parameter:
rate of volume the ISM. : It specifies a rate in the CCF disk array.
IP address of ctrl A
IP address of ctrl B
Example:
ADD ISM: VOLUMERATE="25/16", ACTRLIP="172.16.128.205",
BCTRLIP="172.17.128.206";
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page37
ADD ISM (Cont.)
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page38
Contents
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page39
The Connection Between CCF and
IMS NE
P-CSCF MRFC
S-CSCF
I-CSCF IP Centrex
Session party
duration
AS
Media info
QoS
CCF IOI
S-CSCF-CDR
MGCF-CDR
MRFC-CDR Charging associated info
……
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page40
Peer IMS NE of CCF
IMS Core NE
P-CSCF
I-CSCF
S-CSCF
ATS
MRFC
IP Centrex
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page41
The Configuration for IMS NE
Start
ADD PEER
[CCF ID]
[Access point ID ]
Configure peer [Peer host name]
NEs .......
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page42
ADD PEER
Command Function: Add a peer device.
Parameter:
Peer host name: it should be negotiated with the peer office.
Primary peer IP address /Secondary peer IP address
Peer listen port number
Peer device type
Example:
ADD PEER: CCFID=1, APID=1, PERIDT="ATS-AS", NDTYPE=ATS,
REALM="china.huawei.com", SERRACR=NO;
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page43
ADD PEERLINK
Command function: add a peer device and to define the
information required for connecting with the iCG9815.
Parameter:
Parameter Description
Peer host name (Mandatory) It specifies the peer host name. In alarm, it
shows case insensitive.
Link name (Mandatory) It specifies the peer link name. In alarm, it
shows case insensitive.
Primary local IP (Mandatory) It specifies the primary virtual IP address
address through which the CCF connects to peer devices.
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page44
ADD PEERLINK
Parameter Description
Local port number (Optional) It specifies the listening port number of an access
point.
Local connect port (Optional) It specifies the port number used for CCF connecting.
Primary peer IP (Mandatory) It specifies the primary IP address for peer listening.
address
Peer listen port (Mandatory) It specifies the port number used for peer listening.
number
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page45
Work Mode Between CCF and BS
PUSH Mode PULL Mode
BS BS
Write Read
CCF/CGF
CCF/CGF
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page46
Work Mode between CCF and BS
PUSH
In the PUSH mode, the iCG9815 serves as the client, and the BS
serves as the server. The iCG9815 sends the final CDR files to the
BS.
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page47
The Configuration for BS
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page48
Data Configuration Check
Step1: check the processes status
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page49
How to Check the Connection with
NE?
In the navigation tree, check if there are original CDRs
received from these NEs .
Check the protocol message in debugger console
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page50
How to Check the Connection with
BS?
For example, the billing center accesses the iCG9815 using user bs,
you need to set /var/backsave/Second, that is the path to the backup
CDRs. Do as follows:
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page51
How to Check the Connection with
OMU?
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page52
Summary
Data configuration Introduction
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page53
Thank you
www.huawei.com