The output file format is Excel spread sheet along with all piping parts and specification rules.
Piping spec spread sheet issued to QC checker for thorough quality check.
4. Spec Dependent Sheets (Service limit, Branch Table, Taps, Bolting Rule, Gasket Rule, Bend Angel
etc.,).
Update the piping specification spread sheet based on comments received from QC checker.
Bulkload Reference Data -
Append Mode
Upload the piping specification spread sheet in the S3D
“Test Data Base” by using Bulkload Reference Data tool
(Append mode).
Error Log File
Open the log file to check for any errors or warnings in the bulkloading process.
Bulkload Reference Data -
AMD Mode
To review the specification error log file received from
Bulkload reference data tool.
Update the piping specification spread sheet if
required and upload again into “Test Data Base” in AMD
mode.
Catalog Placement Tester
To examine placement of 3D components in the S3D model
environment by using S3D - Catalog Placement Tester tool.
Catalog Placement Tester tool – Report
The Catalog Placement Tester tool
generates the report in the form of
an Excel workbook, which reports
Information regarding the placement
of the components.
Based on the output report file
resolve the errors and add if there is
any missing component.
Bulkload piping spec into “Test
Data Base” again and resolve the
errors (AMD mode – Add, Modify
and Delete).
MTO Check
Perform MTO Check by using S3D
piping MTO Reports.
S3D generates the report in the form of
an Excel workbook, which reports
Information regarding the components
along with material description and its
NPD size.
Update the material description in the
piping specification if required and
upload again into “Test Data Base”
AMD mode.
Editing Existing Spec
AD-HOC Service Requests
Workflow Of AD-Hoc
Update the existing master spec. Excel spread sheet based on
Service request received from S3D user.
Bulk load spec spread sheet in the Test Database.
Review the Error log file received from bulkload reference data
tool and update the spec again if required.
Bulkload piping spec into “Test Data Base” again and resolve the
errors (AMD mode – Add, Modify and Delete).
Perform MTO Check using Description Reports if required.
Resolve errors and bulk load again.
Issue spec for final check – QC Checker (Piping Isometric sheet
should be documented as a final check copies).
Finalised spec. to be loaded into Production Database.
Spec to be tested in the Production Database.
Spec update Completion status to be Informed S3D user via CAD
Portal Notification.
Close the service request.