a) breakdown torque
b)pull out torque
c)full load torque
d) both a & b.
The power input of the rotor of a
440v,50Hz,6pole, 3phase induction motor is
100kW.The motor electromotive force
observed to make 120 cycles per minute .find
the rotor speed.
a) 1200rpm
b) 900rpm
c) 990rpm
d) 890rpm
The slip ring rotor obtains at torque.
a)low starting
b)medium starting
c)high starting
d) both a & b
The rotor core is laminated by using
a)copper
b)bronze
c)cast iron
d) none of the above
In standstill position, the value of slip is
a) 1
b)<1
c)>1
d) 0
The conversion of electrical power to
mechanical power is takes place in
a)rotor
b) motor
c)stator
d) all the above
In an ideal induction motor,
a)N<Ns
b)N>Ns
c)N=Ns
d) all the above
The bars in the squirrel cage rotor are shorted
with the help of
a) end rings
b)slip rings
c)both a & b
d) none of these
The small capacity motors having rating less
than 5hp is called
a)DOL starter
b)rotor resistance starter
c)star delta starter
d) Autotransformer starter
The power input to the rotor of a 400 V,50
Hz, 6 pole,
3 phase induction motor is 20 kW and the
slip is 3% then calculate the rotor copper
loss.
a)650W
b)550W
c)600W
d)790W
The fractional slip of an induction motor is the
ratio of