2018/12/28 www.huawei.com
Existing RRU3959 in 3G 2T2R & 4G 4T4R scenarios will be dismantled and re-used in 3G & 4G 2T2R split scenarios.
2
New CE Boards Introduction
UBBPe Boards’ Front-side Picture Capacity
UBBPe3
UO LO UL
12 Cells 6
768/768 CE 6*20MHz 2T2R Cells(384/512CE)
Function HSDPA User:512 3*20MHz 4T4R +
HSUPA User:512 3*20M 2T2R
• Provides CPRI ports for communication with RF modules.
• Processes uplink and downlink baseband signals.
• Supports the multiplex of baseband resources among different modes, UBBPe4
thereby implementing multimode concurrency. UO LO UL
12 Cells 6
Supported RATs 1024/ 1024 CE 6*20MHz 2T2R Cells(512/512CE)
HSDPA User:768 6*20MHz 4T4R +
Board Single Mode Multimode
HSUPA User:768 3*20M 4T4R
UBBPe3 UMTS, LTE NB-IoT, or LTE FDD UL/LM/ ULM/ UM co-BBP
UBBPe4 UMTS/ LTE NB-IoT/ LTE TDD/ LTE FDD UL/LM/ ULM/ UM/ TM co-BBP
3
UMTS RRU3959a Specifications
UMTS RRU3959a
1920 to 1980/
Frequency Band
2110 to 2170
TX/ RX channel 2T2R
6 carriers without MIMO
UMTS Carriers
4 carriers with MIMO
TOC 2 x 60W
4
LTE RRU3959a Specifications
LTE RRU3959a
1710 to 1785/
Frequency Band
1805 to 1880
TX/RX channel 2T2R
LTE FDD:2 carriers
Carriers Capacity
GSM:8 TRXs
TOC 2x60W
Dimensions 400 mm x 300 mm x 100 mm
Weight 14Kg (Without Housing)
5
LTE RRU5904 Specifications
LTE RRU5904
1710 to 1785/
Frequency Band
1805 to 1880
TX/RX channel 4T4R
LTE FDD:3 carriers
Carriers Capacity
GSM:8 TRXs
TOC 4x60W
Dimensions 400 mm x 300 mm x 150 mm
Weight 22Kg (Without Housing)
6
4T4R Upgrade: Jumper Connectivity
Major change points:
1. Existing 4 ports, dual band & dual beam antennas will be replaced with new 8 ports, dual band & dual beam antennas.
2. Existing combiners of parent and child sectors will be shifted to connected to B4 and B2 ports of new antennas separately.
3. Existing 1800MHz RRU3959 of parent sectors will be shifted and connected to B1 ports of new antennas.
4. D, B ports of new 1800MHz RRU5904 (4.3-10 connector type) will be connected to existing combiners of parent sectors.
5. A, C ports of new 1800MHz RRU5904 (4.3-10 connector type) will be connected to B3 ports of new antennas.
1800MHz
RRU3959
A B
Combiner Combiner
Combiner Combiner
Angle of view: from antenna back to front 3959 & 3959a have opposite A, B ports
7
2T2R Split: Jumper Connectivity (Re-use 1800MHz RRU3959)
Major change points:
1. Existing 4 ports & dual band antennas or 2 single band antennas will be replaced with new 4 ports, dual band & dual beam antennas.
2. New combiners with 4.3-10 connectors will be connected to B2 ports of new antennas for parent sectors.
3. New combiners with DIN connectors will be connected to B1 ports of new antennas for child sectors.
4. New 2100MHz RRU3959a will be connected to new filters firstly, then with re-used 1800MHz RRU3959 will be connected to combiners of parent sectors.
5. Existing 2100MHz RRU3826 will be shifted and connected to combiners of child sectors.
6. Existing 1800MHz RRU3959 will be shifted and connected to combiners of child sectors.
Combiner Combiner
Angle of view: from antenna back to front 3959 & 3959a have opposite A, B ports
8
2T2R Split: Jumper Connectivity (New 1800MHz RRU3959a)
Major change points:
1. Existing 4 ports & dual band antennas or 2 single band antennas will be replaced with new 4 ports, dual band & dual beam antennas.
2. New combiners with 4.3-10 connectors will be connected to B2 ports of new antennas for parent sectors.
3. New combiners with DIN connectors will be connected to B1 ports of new antennas for child sectors.
4. New 2100MHz RRU3959a will be connected to new filters firstly, then with new 1800MHz RRU3959a will be connected to combiners of parent sectors.
5. Existing 2100MHz RRU3826 will be shifted and connected to combiners of child sectors.
6. Existing 1800MHz RRU3959 will be shifted and connected to combiners of child sectors.
Combiner Combiner
Angle of view: from antenna back to front 3959 & 3959a have opposite A, B ports
9
4T6S Split: Jumper Connectivity
Major change points:
1. Existing 4 ports & dual band antennas or 2 single band antennas will be replaced with new 8 ports, dual band & dual beam antennas.
2. New combiners with 4.3-10 connectors will be connected to B4 ports of new antennas for parent sectors.
3. New combiners with DIN connectors will be connected to B2 ports of new antennas for child sectors.
4. New 2100MHz RRU3959a will be connected to new filters firstly, then to combiners of parent sectors.
5. New 1800MHz RRU5904 will be connected to combiners (port D, B) and antennas (port A, C) of both parent and child sectors.
6. Existing 2100MHz RRU3826 will be shifted and connected to combiners of child sectors.
Combiner Combiner
Angle of view: from antenna back to front 3959 & 3959a have opposite A, B ports
10
4T4R Upgrade: Board Layout & CPRI Port Connectivity
LTE FDD 1800MHz Configuration Rules UMTS 2100MHz Configuration Rules
1. BBP slot priorities: Slot 1 > slot 0 > slot 5 1. BBP slot priorities: Slot 3 > slot 2
2. BBP type priorities: UBBPe4 > UBBPe3 > UBBPd3 > LBBPxx 2. BBP type priorities: UBBPe3 > UBBPd3 > UBBPd2 > WBBPxx
3. BBP CPRI port priorities 3. BBP CPRI port priorities
a. Slot 1, port 0 ~ 2 for cell 1 to cell 3 a. Slot 3, port 0 ~ 2 for cell 1 to cell 3
b. Slot 1, port 3 ~ 5 for 1st (shifted RRU) of cell 1 to cell 3 b. Slot 3, port 3 ~ 5 for cell 4 to cell 6
c. Slot 0, port 3 ~ 5 for 2nd (existing RRU) of cell 1 to cell 3
UBBPd3 UBBPd3
UBBPd3 UBBPe4
UBBPd3 UBBPd2
Cell 1 Cell 3
Cell 1 Cell 4
Cell 2
Cell 2 Cell 5
Cell 4 Cell 6
Cell 3 Cell 6
Cell 5
11
2T2R Split: Board Layout & CPRI Port Connectivity
LTE FDD 1800MHz Configuration Rules UMTS 2100MHz Configuration Rules
1. BBP slot priorities: Slot 1 > slot 0 1. BBP slot priorities: Slot 3 > slot 2
2. BBP type priorities: UBBPe3 > UBBPd3 > LBBPxx 2. BBP type priorities: UBBPe3 > UBBPd3 > UBBPd2 > WBBPxx
3. BBP CPRI port priorities 3. BBP CPRI port priorities
a. Slot 1, port 0 ~ 2 for cell 1 to cell 3 a. Slot 3, port 0 ~ 2 for cell 1 to cell 3
b. Slot 1, port 3 ~ 5 for cell 4 to cell 6 b. Slot 3, port 3 ~ 5 for cell 4 to cell 6
Cell 3 Cell 6
Cell 3
Cell 2 Cell 5
Cell 2
UBBPd3
UBBPd3 UBBPe3
UBBPd3 UBBPd2
Cell 1
Cell 1 Cell 4
Cell 2
Cell 2 Cell 5
Cell 3
Cell 3 Cell 6
12
4T6S Split: Board Layout & CPRI Port Connectivity
LTE FDD 1800MHz Configuration Rules UMTS 2100MHz Configuration Rules
1. BBP slot priorities: Slot 1 > slot 0 1. BBP slot priorities: Slot 3 > slot 2
2. BBP type priorities: UBBPe4 > UBBPe3 > UBBPd3 > LBBPxx 2. BBP type priorities: UBBPe3 > UBBPd3 > UBBPd2 > WBBPxx
3. BBP CPRI port priorities 3. BBP CPRI port priorities
a. Slot 1, port 0 ~ 2 for cell 1 to cell 3 a. Slot 3, port 0 ~ 2 for cell 1 to cell 3
b. Slot 1, port 3 ~ 5 for cell 4 to cell 6 b. Slot 3, port 3 ~ 5 for cell 4 to cell 6
Cell 3 Cell 6
Cell 3
Cell 2 Cell 5
Cell 2
UBBPd3
UBBPd3 UBBPe4
UBBPd3 UBBPd3
Cell 1
Cell 1 Cell 4
Cell 2
Cell 2 Cell 5
Cell 3
Cell 3 Cell 6
13
4T4R Upgrade: Color Rings
Typical rules:
1. 1st sector: red color, 2nd sector: yellow color, 3rd sector: blue color, 4th sector: purple color, 5th sector: orange color, 6th sector: green color.
2. 2T2R: 2 times for 1st channel, 1 time for 2nd channel.
3. 4T4R: 4 times for 1st channel, 3 times for 2nd channel, 2 times for 3rd channel, 1 time for 4th channel.
4. 1 time white ring for 2nd system.
A B B D C A A B B A A B A B B D C A A B B A A B A B B D C A A B B A A B
UMTS LTE UMTS LTE LTE UMTS LTE UMTS LTE LTE UMTS LTE UMTS LTE LTE
2100MHz 1800MHz 2100MHz 1800MHz 1800MHz 2100MHz 1800MHz 2100MHz 1800MHz 1800MHz 2100MHz 1800MHz 2100MHz 1800MHz 1800MHz
RRU3826 RRU5904 RRU3826 RRU3959a RRU3959 RRU3826 RRU5904 RRU3826 RRU3959a RRU3959 RRU3826 RRU5904 RRU3826 RRU3959a RRU3959
14
2T2R Split: Color Rings (Re-use 1800MHz RRU3959)
Typical rules:
1. 1st sector: red color, 2nd sector: yellow color, 3rd sector: blue color, 4th sector: purple color, 5th sector: orange color, 6th sector: green color.
2. 2T2R: 2 times for 1st channel, 1 time for 2nd channel.
3. 1 time white ring for 2nd system.
B A A B A B A B B A A B A B A B B A A B A B A B
UMTS LTE UMTS LTE UMTS LTE UMTS LTE UMTS LTE UMTS LTE
2100MHz 1800MHz 2100MHz 1800MHz 2100MHz 1800MHz 2100MHz 1800MHz 2100MHz 1800MHz 2100MHz 1800MHz
RRU3959a RRU3959 RRU3826 RRU3959 RRU3959a RRU3959 RRU3826 RRU3959 RRU3959a RRU3959 RRU3826 RRU3959
15
2T2R Split: Color Rings (New 1800MHz RRU3959a)
Typical rules:
1. 1st sector: red color, 2nd sector: yellow color, 3rd sector: blue color, 4th sector: purple color, 5th sector: orange color, 6th sector: green color.
2. 2T2R: 2 times for 1st channel, 1 time for 2nd channel.
3. 1 time white ring for 2nd system.
B A B A A B A B B A B A A B A B B A B A A B A B
UMTS LTE UMTS LTE UMTS LTE UMTS LTE UMTS LTE UMTS LTE
2100MHz 1800MHz 2100MHz 1800MHz 2100MHz 1800MHz 2100MHz 1800MHz 2100MHz 1800MHz 2100MHz 1800MHz
RRU3959a RRU3959a RRU3826 RRU3959 RRU3959a RRU3959a RRU3826 RRU3959 RRU3959a RRU3959a RRU3826 RRU3959
16
4T6S Split: Color Rings
Typical rules:
1. 1st sector: red color, 2nd sector: yellow color, 3rd sector: blue color, 4th sector: purple color, 5th sector: orange color, 6th sector: green color.
2. 2T2R: 2 times for 1st channel, 1 time for 2nd channel.
3. 4T4R: 4 times for 1st channel, 3 times for 2nd channel, 2 times for 3rd channel, 1 time for 4th channel.
4. 1 time white ring for 2nd system.
B A B D C A A B B D C A B A B D C A A B B D C A B A B D C A A B B D C A
UMTS LTE UMTS LTE UMTS LTE UMTS LTE UMTS LTE UMTS LTE
2100MHz 1800MHz 2100MHz 1800MHz 2100MHz 1800MHz 2100MHz 1800MHz 2100MHz 1800MHz 2100MHz 1800MHz
RRU3959a RRU5904 RRU3959 RRU5904 RRU3959a RRU5904 RRU3959 RRU5904 RRU3959a RRU5904 RRU3959 RRU5904
17
Thank You