• Material Properties
• Mix Design
• Casting of samples with vaying alccofine
percentage
• Testing of samples
• Cost analysis of 1 m³ of concrete
TIME SCHEDULE
WORK DONE
PROPERTY RESULT IS CODE
Standard consistency of 35% -
cement
Initial setting time of 82 minutes <60 minutes (IS 4031) PART
cement V
Specific gravity of cement 3.12 3.15 ( IS 1199)
Specific gravity of fine 3.06 2.6 - 2.8( Concrete
aggregate Technology –M.S. Shetty)
Specific gravity of coarse 6.3 mm = 2.854 2.6- 2.9 ( Concrete
aggregate 12.5mm =2.88 Technology –M.S. Shetty)
20mm =3.10
Compressive strength of 7 day =23 N/mm² >53 N/mm² ( IS 4031)
cement mortar cube 28 day =55 N/mm²
Fineness Modulus F.A = 3.14 For F.A = 2 - 3.5(IS 383)
20 mm = 2.74 For C.A = 6- 8
12.5 mm= 1.84
6.3 mm=0.783
MIX DESIGN
• M 35 MIX.docx
CASTING PROCESS
CASTING
• 3 concrete cubes of size 15×15×15 cm were
casted to find the Compressive strength
• 3 concrete cylinders of diameter 15cm and
height 30 cm were casted to find the Splitting
tensile strength
• 3 concrete beams of size 10×10×50 were
casted to find the Flexural strength
• Polycarboxylate ether – used as a admixture
to attain workability
TESTING
TESTING
WORK TO BE DONE
• Casting of M35 P40 concrete cubes, cylinders,
beams
• Effect of Alccofine in standard consistency of
cement
• Effect of Alccofine in Slump of concrete
• Cost analysis of 1m³ of concrete
REFERENCES
• Experimental Study on High-Performance Concrete with Mixing of
Alccofine and Flyash, Deval Soni, Suhasini Kulkarni