Anda di halaman 1dari 54

Introduction to TOS-I

Theory of Structure - I
Lecture Outlines
 Introduction
 History of Structural Engineering
 Forms of Structures
 Materials
 Loads

Department of Civil Engineering 2


University of Engineering and
Technology, Taxila, Pakistan
Introduction
STRUCTURAL
ENGINEERING

1ST YEAR 2ND YEAR 3RD YEAR 4TH YEAR

THEORY OF THEORY OF
ENGG. STRUC.
STRUCTURES STRUCTURES
MECHANICS ENGG.
I II
Department of Civil Engineering 3
University of Engineering and
Technology, Taxila, Pakistan
History of Structural
Engineering
 Why history is important?
 One reason why history is important it that the
past has value to our society.
 History is the narrative of mankind.
 History when presented properly lends itself to
critical analysis.

Department of Civil Engineering 4


University of Engineering and
Technology, Taxila, Pakistan
History of Structural
Engineering
 Greek and Egyptian Temples
 Made of stone
 Employed beams and columns
 Many columns having little useful space between
them

Department of Civil Engineering 5


University of Engineering and
Technology, Taxila, Pakistan
Greek temple built 2500 years ago
Department of Civil Engineering 6
University of Engineering and
Technology, Taxila, Pakistan
Greek temples of Poseidonia (now called Paestum)
dating from the sixth century BC.
Department of Civil Engineering 7
University of Engineering and
Technology, Taxila, Pakistan
The Temple of Debod built in early 2nd century BC
Department of Civil Engineering 8
University of Engineering and
Technology, Taxila, Pakistan
Egypt: Temples of Karnak built 2000 years ago

Department of Civil Engineering 9


University of Engineering and
Technology, Taxila, Pakistan
History of Structural
Engineering
 Arch structures were discovered prior to
Roman era.
 Roman Empire used arches extensively in
construction.
 Stone arches had span of 100 ft and more

Department of Civil Engineering 10


University of Engineering and
Technology, Taxila, Pakistan
The Colosseum is one of Rome's most distinctive
landmarks.  Construction of this famous amphitheatre
began in 72 AD.
Department of Civil Engineering 11
University of Engineering and
Technology, Taxila, Pakistan
Arches

Aqueducts

Aqueduct at Segovia in eastern Spain


Department of Civil Engineering 12
University of Engineering and
Technology, Taxila, Pakistan
The arch of Costantino built in 312 AD
Department of Civil Engineering 13
University of Engineering and
Technology, Taxila, Pakistan
History of Structural
Engineering
 From A.D. 500 to A.D.1500, structures that
were built continued to employ the stone arch
as the major structural forms.
 Gothic Cathedrals
 Roof was supported by flying buttresses

Department of Civil Engineering 14


University of Engineering and
Technology, Taxila, Pakistan
Flying
Buttress
Cathedral
from North
East
Chichester

Department of Civil Engineering 15


University of Engineering and
Technology, Taxila, Pakistan
Flying
Buttress

Cathedral
from South
East
Chichester

Department of Civil Engineering 16


University of Engineering and
Technology, Taxila, Pakistan
History of Structural
Engineering
 Fifteenth and Sixteenth centuries are known as
Renaissance.
 Galileo (1564-1642)
 Concept of force and moments

 Robert Hooke (1635-1703)


 Law of linear behavior of materials

 Sir Isaac Newton (1642-1727)


 Laws of motion

 Leonhard Euler (1707-1783)


 Buckling of columns

 Palladio
 introduced the use of truss
Department of Civil Engineering 17
University of Engineering and
Technology, Taxila, Pakistan
GALILEO ROBERT HOOKE

ISSAC NEWTON LEONHARD EULER PALLADIO


Department of Civil Engineering 18
University of Engineering and
Technology, Taxila, Pakistan
History of Structural
Engineering
 Modern Era
 Introduction of Iron
 Industrial Revolution
 First major structure built or iron was Severn
River Bridge Coalbrookdale.
 Suspension bridges
 Thomas Telford’s Bridge over Menai Straits in
Wales,
 Brunel’s Clifton Bridge in Bristol,
 Finley’s Bridge over Merrimack River in
Newburyport, Massachusetts.
Department of Civil Engineering 19
University of Engineering and
Technology, Taxila, Pakistan
Iron bridge, a cast-iron arch bridge built in 1779 across the
River Severn near Coalbrookdale, Shropshire, England
Department of Civil Engineering 20
University of Engineering and
Technology, Taxila, Pakistan
Thomas Telford built the suspension bridge in the middle in 1826. They had
to destroy some of the castle to anchor it to the rock.

Department of Civil Engineering 21


University of Engineering and
Technology, Taxila, Pakistan
Isambard Kingdom Brunel designs the Clifton Suspension Bridge at
Bristol. Two hundred feet above the River Avon, the bridge is 700 feet
long.
Department of Civil Engineering 22
University of Engineering and
Technology, Taxila, Pakistan
History of Structural
Engineering
Rank Building - City - Country Year Stories Height

1. Burj Dubai, Dubai, UAE 2008 189* 850m*

2. Taipei 101, Taipei, Taiwan 2004 101 509m

3. Petronas Tower 1, Kuala Lumpur, Malaysia 1998 88 452m

4. Petronas Tower 2, Kuala Lumpur, Malaysia 1998 88 452m

5. Sears Tower, Chicago, USA 1974 110 442m

6. Jin Mao Building, Shanghai, China 1999 88 421m


Department of Civil Engineering 23
University of Engineering and
Technology, Taxila, Pakistan
Department of Civil Engineering 24
University of Engineering and
Technology, Taxila, Pakistan
Forms of Structures

Structural Forms

Cables Arches Trusses Beams

Surfaces

Membranes Plates Shells


Department of Civil Engineering 25
University of Engineering and
Technology, Taxila, Pakistan
Cables
 Cables stretch well and are light, so they are
useful in large structures. They only take
tension stresses.
 Cables can be crisscrossed and combined
with surface materials to achieve light and
large structures.
 Examples of this technique are Suncoast
Dome and Georgia Dome in the United
States
Department of Civil Engineering 26
University of Engineering and
Technology, Taxila, Pakistan
Department of Civil Engineering 27
University of Engineering and
Technology, Taxila, Pakistan
Department of Civil Engineering 28
University of Engineering and
Technology, Taxila, Pakistan
Hanger Tower
Cable

Cable Road Way


Anchorage

Department of Civil Engineering Golden Gate Bridge, San Francisco 29


University of Engineering and
Technology, Taxila, Pakistan
Cables
 Grace Memorial Bridge over the Cooper River
 Between Charleston, South Carolina (USA) and
Mount Pleasant, South Carolina, stands the Grace
Memorial Bridge. 
 Completed in 1929, the cantilever steel structure
has a main span of 1050 ft., or 320 m. and a total
length of 3.6 miles or 5.79 Kilometers. 
 A parallel bridge, with a similar design but a shorter
main span, was built in 1966.  This allowed the old
bridge to be converted to one-way traffic. 
Department of Civil Engineering 30
University of Engineering and
Technology, Taxila, Pakistan
Grace Memorial Bridge over the Cooper River
Department of Civil Engineering 31
University of Engineering and
Technology, Taxila, Pakistan
Arches
 An arch is a curved structure capable of
spanning a space while supporting significant
weight (e.g. a doorway in a stone wall).
 The arch is significant because, in theory at
least, it provides a structure which eliminates
tensile stresses in spanning an open space.
 All the forces are resolved into compressive
stresses.

Department of Civil Engineering 32


University of Engineering and
Technology, Taxila, Pakistan
Chinese Moon Bridge
Department of Civil Engineering 33
University of Engineering and
Technology, Taxila, Pakistan
Made by Zhao1974 in Hebei Province, China. Built by the
architect Li Chun from 595 to 605 AD. World's oldest fully-
stone, open-spandrel, segmental arch bridge.
Department of Civil Engineering 34
University of Engineering and
Technology, Taxila, Pakistan
Triangular Arch Round Arch Segmental Arch

Rampant Round Lancet Arch Shoulder Flat Three-Foiled


Arch Arch Cusped Arch

Equilateral
Department of Civil Engineering 35
University of Engineering and Pointed Arch
Technology, Taxila, Pakistan
Horseshoe Arch Three-centered Elliptical Arch
Arch

Inflexed Arch Ogee Arch Reverse Ogee Tudor Arch


Arch

Department of Civil Engineering 36


University of Engineering and Parabolic Arch
Technology, Taxila, Pakistan
Truss
 In architecture and structural engineering, a
truss is a structure comprising one or more
triangular units constructed with straight
slender members whose ends are connected
at joints.
 A plane truss is one where all the members
and joints lie within a 2-dimensional plane,
while a space truss has members and joints
extending into 3 dimensions.
Department of Civil Engineering 37
University of Engineering and
Technology, Taxila, Pakistan
Truss
 All members are assumed in axial
compression or tension.
 Members are joined with the help of
frictionless pins.
 Loads are applied at joints only.

Department of Civil Engineering 38


University of Engineering and
Technology, Taxila, Pakistan
Types of Trusses

Common Truss Flat Truss Truncated Truss

It is characterized by It gets its name from A combination of the


its triangular shape. its parallel top and two is a truncated
bottom chords. truss.
It is most often used
for roof construction. It is often used for It is used in hip roof
floor construction. construction.

Department of Civil Engineering 39


University of Engineering and
Technology, Taxila, Pakistan
Support structure under the Auckland Harbour Bridge.
Department of Civil Engineering 40
University of Engineering and
Technology, Taxila, Pakistan
A Vierendeel bridge; note the lack of diagonal elements in the
primary structure and the way bending loads are carried between
Department of Civil Engineering
University of Engineering and elements 41

Technology, Taxila, Pakistan


Beams
 A beam is a structural element that carries
load primarily in bending (flexure).
 Beams generally carry vertical gravitational
forces but can also be used to carry
horizontal loads (i.e. loads due to an
earthquake or wind).
 The loads carried by a beam are transferred
to columns, walls, or girders, which then
transfer the force to adjacent structural
compression members.
Department of Civil Engineering 42
University of Engineering and
Technology, Taxila, Pakistan
Beams
 It requires only vertical supports at ends
generally.
 It is a compact structure.
 It’s disadvantage is that it sometimes uses
materials less economically than other
structural systems.

Department of Civil Engineering 43


University of Engineering and
Technology, Taxila, Pakistan
Department of Civil Engineering 44
University of Engineering and
Technology, Taxila, Pakistan
Department of Civil Engineering 45
University of Engineering and
Technology, Taxila, Pakistan
Surfaces

Surfaces

Membranes Plates Shells

Department of Civil Engineering 46


University of Engineering and
Technology, Taxila, Pakistan
Membranes
 Thin sheets of material

 Resist applied loads by


tension.

 Examples are tents,


sails, balloons etc

Department of Civil Engineering 47


University of Engineering and
Technology, Taxila, Pakistan
Plates
 Plates are flat
surfaces that transfer
loads by bending in a
manner similar to
beams.

Department of Civil Engineering 48


University of Engineering and
Technology, Taxila, Pakistan
Shells
 Shell is rigid surface
that transfers loads in
two directions.
 The primary difference
between a plate and a
shell is that the shell
has curvature whereas
the plate does not. TWA Flight Center, John F. Kennedy
International Airport, New York.

Department of Civil Engineering 49


University of Engineering and
Technology, Taxila, Pakistan
Materials
Properties
of Material

Deformation
Strength
Characteristics

Strengt
Comp.
h to Stiff Elastic Ductile
Tension
weight
Resist.
ratio
Department of Civil Engineering 50
University of Engineering and
Technology, Taxila, Pakistan
Materials
 Aggregates
 Steel
 Concrete
 Wood
 Aluminum
 Fiber Glass
 Composite Materials etc.

Department of Civil Engineering 51


University of Engineering and
Technology, Taxila, Pakistan
Loads

Loads Loads

Dynamic
Static Loads Dead Live
Loads

Department of Civil Engineering 52


University of Engineering and
Technology, Taxila, Pakistan
Loads Building
Live Loads

Bridge Live
Loads

Earthquake
Live Loads Loads

Snow
Loads

Wind
Loads
Department of Civil Engineering 53
University of Engineering and
Technology, Taxila, Pakistan
Department of Civil Engineering 54
University of Engineering and
Technology, Taxila, Pakistan

Anda mungkin juga menyukai