HYDROLOGIC CYCLE
WHAT IS PERMEABILITY?
A measure of how easily a fluid (e.g., water) can pass through a porous medium (e.g., soils)
water
Dense soil
- difficult to flow - low permeability
Energy is dissipated in overcoming the soil resistance and hence is the head loss.
BERNOULLIS EQUATION
For flow through soils, velocity (and thus velocity head) is very small. Therefore, Velocity head Expressing energy in unit of length: + Pressure head Total head = + Elevation head
BERNOULLIS EQUATION
2. Strain energy
- due to pressure
3. Potential energy
- due to elevation (z) with respect to a datum
BERNOULLIS EQUATION
For flow through soils, velocity (and thus velocity head) is very small. Therefore, 0 Velocity head Expressing energy in unit of length: + Pressure head Total head = +
At any point within the flow regime: Pressure head = pore water pressure/w Elevation head = height above the selected datum
PERMEABILITY
Soils are assemblages of solid particles with interconnected voids where water can flow from a point of high energy to a point of low energy The study of flow water through porous media is important for stability analyses of earth retaining structures subjected to seepage force The property of soils that allows water to pass through them at some rate The property is a product of the granular nature of the soil, although it can be affected by other factors (such as water bonding in clays) Different soil has different permeabilities.
HYDRAULIC GRADIENT
Hydraulic gradient (i) between A and B is the total head loss per unit length.
TH A TH B i l AB
length AB, along the stream line
water
DARCY'S LAW
Darcy's law states that there is a linear relationship between flow velocity (v) and hydraulic gradient (i) for any given saturated soil under steady laminar flow conditions. If the rate of flow is q (volume/time) through cross-sectional area (A) of the soil mass, Darcy's Law can be expressed as v = q/A = k.i where k = permeability of the soil
The flow velocity (v) is also called the Darcian velocity or the superficial velocity. It is different from the actual velocity inside the soil pores, which is known as the seepage velocity, vS. At the particulate level, the water follows a tortuous path through the pores. Seepage velocity is always greater than the superficial velocity, and it is expressed as
where AV = Area of voids on a cross section normal to the direction of flow n = porosity of the soil
Soil Gravel Coarse sand Medium sand Fine sand Silty sand Silt Clay
k (cm/sec) 100 100 to 10-1 10-1 to 10-2 10-2 to 10-3 10-3 to 10-4 1 x 10-5 10-7 to 10-9
Permeability (k) is an engineering property of soils and is a function of the soil type. Its value depends on the average size of the pores and is related to the distribution of particle sizes, particle shape and soil structure. The ratio of permeabilities of typical sands/gravels to those of typical clays is of the order of 106. A small proportion of fine material in a coarse-grained soil can lead to a significant reduction in permeability.
Determination of coefficient permeability Constant head test For coarse-grained soil that have high coefficient permeability Falling head test For fine grained soils with low permeability Field tests Pumping tests
PUMPING TESTS
Field or in-situ measurement of permeability avoids the difficulties involved in obtaining and setting up undisturbed samples in a permeameter. It also provides information about bulk permeability, rather than merely the permeability of a small sample.
A field permeability test consists of pumping out water from a main well and observing the resulting drawdown surface of the original horizontal water table from at least two observation wells. When a steady state of flow is reached, the flow quantity and the levels in the observation wells are noted.
Two important field tests for determining permeability are: Unconfined flow pumping test, and confined flow pumping test.