CATEGORY:
BIM Model
Fabricator
Structure Engineer
Contractor
MEP Engineer
ARCHITECTURAL DESIGN
BUILDABILITY & GREENMARK ARCHITECTURAL DESIGN MODEL STRUCTURAL DESIGN MODEL MEP DESIGN MODEL ARCHITECTURAL TAKE-OFF DESIGN ANALYSIS
SOLAR RADIATION SUN PATH ANALYSIS DAYLIGHTING ANALYSIS WIND ANALYSIS SITE ORIENTATION THERMAL ANALYSIS ARTIFICIAL LIGHTING ANALYSIS
DESIGN CONCEPT
STRUCTURAL DESIGN
STRUCTURAL DESIGN MODEL ARCHITECTURAL DESIGN MODEL
DESIGN ANALYSIS
STRUCTURE PERFORMANCE FOUNDATION DESIGN COLUMN DESIGN BEAM DESIGN SLAB DESIGN
MEP DESIGN
MEP DESIGN MODEL ARCHITECTURAL DESIGN MODEL
MEP TAKE-OFF
DESIGN DOCUMENT DRAWINGS
PLANNING/ LOGISTIC
PREFABRICATION
SAFETY
FACILITY MANAGEMENT
View 2D and 3D project designs from the field with Buzzsaw mobile for iPhone, iPad, and Android
PLANNING/ LOGISTICS
QS
SAFETY
PREFABRICATION
CONSTRUCTION
1 2 3 4
3 6 1 1 1
5
6
5 4
Podium
1st to 4th storey designed as 300mm thick flat slab typical with 600x600mm columns and 1500x1500x500mm drop panel 800mm diameter CBP wall is provided at basement The basement designed as 400mm thick slab supporting by 800mm diameter piles
Office Tower
Designed as structural column with beam-slab framing Beams have been standardized to 2000x500mm, 250x500, 750x500 and 750x700mm The slab is designed as 250mm thick typically with 125mm precast prestressed plank and 125mm topping
Group of wash basins connected in series Group of urinals connected in series Loop ventilating pipe provided
Electrical System
Use of lifts with AC variable voltage and variable frequency (VVVF) motor drive and energy efficient features such as sleep mode features are used.
AHU and 177 kw Cooling tower placed on the roof WSHP (Water Source Heat Pumps) are used to cool the building which is very effective.
Thermal Analysis
Orientation Analysis
The precast connection details can be better understand by including 3D view generated automatically from Revit Structure
Import Architectural, Structure and MEP Revit Model in IFC format to Tekla BIMSight The Architectural, Structure and MEP models are highlighted in different color for easy identification
Run clash check and the clash points will be highlighted automatically
Zoom in to the clash area to study the clash in detail The clash point can be marked up and captured as picture and send out together in a file to the relevant party.
The pictures captured can be used to generate walkthrough inside the file.
3D visualization for carpark construction sequence. Useful for training to the site staff/ subcon.
To Tanjong Pagar MRT Exit G Study the Underground Pedestrain Walkway (UPN) with better visualization
4D schedule simulation useful for Production team players to foresee and anticipate the work flow on site
3D visualization make the decision easier for temporary facilities and tower crane location planning, etc.
Precast Quantity generated directly from Structural model is useful for mould and logistic planning.
M&E Quantity
THANK YOU