Good afternoon, my name is Arman Zuharmansyah. Now I am not working, because last week I had
finished the contract at PT Kemas Indah Maju on October 21, 2019 due to efficiency from the company.
QA and QC that were previously separated are now combined into one so that my contract is not
continued by the company. PT. Kemas Indah is moving forward in the field of plastic injection molding for
cosmetic packaging with a total of 1200 employees. At PT Kemas Indah Maju, I am the Head of QC who
oversees 60 QC personnel consisting of supervisors, leaders and operators. I am responsible for the
quality of Incoming, Outgoing, etc. In addition, I also create and control quality documents such as
procedures, working instructions and forms. I also handle customer complaints, internal problem reports
and also internal and external audits. Before in Kemas I worked at PT. KSU as Quality Assurance is fully
responsible for quality documents such as quality manuals, procedures, work instructions and forms in
all divisions. Because the number of employees is not much, only 50 people. I also handle customer
complaints, internal and external audits. I was there working for 4 years with the status of the contract,
before my contract expired I tried to apply for another company, so I resigned before my contract
expired.
Proses injektion molding yang saya ketahui adalah material plastik dimasukan pada hopper untuk
diproses pada mesin injektion molding dengan suhu dan tekanan tertentu lalu setelah lumer cairan
plastik tersebut dicetak menggunakan mold sesuai dengan design yang ada. Pengecekan yang dilakukan
oleh QC yaitu meliputi Visual, dimensi, warna dan mengecek defect lainnya. Sistem yang digunakan yaitu
menggunakan random sample sesuai dengan AQL. Jika ditemukan defect melebihi batas AQL maka
proses harus dihentikan untuk dilakukan perbaikan. Jika produk yang dihasilkan tidak bermasalah maka
kita bandingkan dengan sample board dan limit sample yang ada, apakah sudah sesuai dengan sample
atau tidak, jika sesuai maka bisa lanjut ke tahap berikutnya
The injection molding process that I know of is a plastic material that is inserted into the hopper to be
processed in an injection molding machine with a certain temperature and pressure then after the liquid
liquid melt is molded using a mold in accordance with the existing design. Checks carried out by QC
include Visual, dimensions, color and other defect checking. The system used is using a random sample
in accordance with AQL. If defects are found to exceed the AQL limit, the process must be stopped for
repairs. If the product produced is not problematic then we compare it with the existing sample board
and sample limit, whether it is in accordance with the sample or not, if appropriate then can proceed to
the next stage