Buatlah gambar yang ada pada latihan modul 1, dengan perintah-perintah yang
sudah dibahas dalam sub bab sebelumnya.
Latihan Modul 1
line
0,0
297,0
@0,210
@297<180
0,0
zoom
all
Membuat garis tepi dengan jarak 10mm dari batas ukuran kertas.
Command:
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Specify next point or [Close/Undo]:
Specify next point or [Close/Undo]:
line
10,10
287,10
287,200
10,200
10,10
line
60,40
@50,0
@50<60
@50<120
@50<180
@50<240
60,40
Membuat kerangka bentuk bintang dengan panjang garis kerangka adalah 50mm.
Command:
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Command:
Command:
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Command:
Command:
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Command:
Command:
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Command:
Command:
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Command:
line
215,95
@50<90
line
215,95
@50<162
line
215,95
@50<234
line
215,95
@50<306
line
215,95
@50<18
Membuat gambar lingkaran dengan titik pusat berada pada titik tengah kerangka
bentuk bintang, dengan panjang jari-jari lingkaran adalah 50mm.
Command:
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]:
Specify radius of circle or [Diameter] <50.0000>:
Command:
circle
215,95
50
line
Command: