1
8 Alasan untuk mendapatkan peralatan
anda dari PT. Anugrah Sukses Marine
1. Harga Terbaik
Sebagai importir dan distributor langsung, kami memberi jaminan harga terbaik sehingga menghemat biaya
dan meningkatkan profit anda.
3. Barang yang anda beli cepat rusak? Anda pernah menerima barang tidak original atau bahkan bekas?
Sebagai distributor langsung, kami menjamin barang yang kami kirim BARU & ASLI. Jika barang yang anda
terima tidak baru dan tidak sesuai spesifikasi, kami KEMBALIKAN UANG ANDA 100%, sehingga anda dapat
bertransaksi dengan tenang.
4. Supplier anda sering salah mengirim barang? Barang yang anda terima tidak sesuai spesifikasi/
pesanan?
Workshop & gudang kami sudah berpengalaman mengerjakan wire rope, sling, dan alat kapal lainnya selama
puluhan tahun. Didukung fasilitas dan peralatan modern, kami menjamin pesanan anda dikerjakan tepat
waktu, sesuai pesanan, dan spesifikasi sehingga memberikan anda ketenangan.
5. Bingung memilih barang yang sesuai? Diomelin boss karena salah pesan barang?
Sales/Marketing kami yang ramah dan berpengalaman dapat membantu anda memilih peralatan yang
sesuai, mengurangi kemungkinan salah pesan, sehingga memberikan anda kenyamanan.
Jika barang yang anda pesan salah, anda dapat tukarkan sehingga lebih memberi anda kepastian
(tidak berlaku untuk wire rope dan rantai yang sudah dipotong potong).
2
Testimoni Pelanggan
Tim kami yang ramah hadir untuk menciptakan pengalaman belanja yang cepat, nyaman dan profesional
3
Workshop
1500 Ton Splicing Machine dari Eropa untuk membuat mata wire 350 dan 600 Ton Splicing Machine dari Eropa menjamin kualitas
rope sampai diameter 76mm Sling anda
Tim operasional kami dengan puluhan tahun pengalaman memastikan pesanan anda disiapkan tepat waktu dan sesuai spesifikasi
200 Ton test bed memastikan wire rope dan chain sling anda aman Coiling machine untuk menyiapkan wire rope pesanan anda
digunakan sehingga mengurangi pasir dan debu yang menempel dipermukaan
membuat wire rope dan peralatan anda lebih tahan lama
Measuring Machine dari Eropa dengan 99.9% akurasi memastikan 3,5, & 10 ton crane mempercepat penyiapan barang anda
quantity wire rope anda sesuai
4
Wire Rope
Kawat Baja
5
PEMESANAN WIRE ROPE
Informasi yang diperlukan saat memesan wire rope:
1. Konstruksi
2. Core/Hati
3. Ukuran
4. Asal
5. Putaran
6. Finishing
7. Quantity
Informasi tambahan/Optional:
8. Grade
9. Lubrikasi
KONSTRUKSI
1 Wire Rope adalah tali baja yang terbuat dari beberapa WIRE yang dipilin membentuk
STRAND, lalu beberapa STRAND tersebut dipilin mengelilingi CORE untuk membentuk
wire rope.
Konstruksi menyatakan banyaknya wire dan strand dalam suatu wire rope.
Format konstruksi wire rope : Banyaknya Strand x Banyaknya Wire
Contoh: Wire Rope 6 x 37 terdiri dari 6 strand yang mengelilingi 1 core dimana masing
masing strand terdiri dari 37 wire.
Semakin banyak jumlah wire didalam strand membuat ukuran individual wire lebih kecil
sehingga wire rope lebih flexible, sebaliknya semakin sedikit jumlah wire di dalam strand
membuat ukuran wire menjadi lebih besar sehingga wire rope menjadi lebih kaku.
Wire Rope yang flexible mempunyai daya tahan terhadap tekukan yang baik sehingga
cocok digunakan pada crane. Wire rope dengan ukuran individual wire yang besar
mempunyai ketahanan terhadap gesekan yang baik sehingga sesuai digunakan untuk
menarik.
6
CORE/HATI
2 Core wire rope umumnya terdiri dari 3 bahan:
• Fiber Core (FC) – tali plastik
• Hemp Core (HC) – tali manila
• Wire Core (IWRC) – kawat baja
Keuntungan FIBER (FC) atau HENEP CORE (HC) adalah wire rope lebih flexible dan lebih
tahan karat. Keuntungan WIRE CORE (IWRC) adalah breaking load yang lebih tinggi.
UKURAN
3 Ukuran diameter wire rope dinyatakan dalam mm atau inch dan dapat diukur meng-
gunakan sigmat. Ilustrasi berikut menunjukkan cara mengukur wire rope yang salah dan
benar:
Faktor yang mempengaruhi ukuran wire rope adalah besarnya sheave yang dilalui wire
rope dan beban yang akan digerakkan oleh wire rope.
4 ASAL
Saat ini, wire rope yang kami stock berasal dari 2 negara: RRT dan Korea. Wire rope Korea
menawarkan kualitas yang lebih tinggi dan konsisten.
5 PUTARAN
Untuk membedakan, wire rope PUTARAN KANAN jika dilihat secara vertikal, sudut pada
strand akan membentuk huruf “Z”, sedangkan wire rope PUTARAN KIRI, jika dilihat secara
vertikal akan membentuk huruf “S”.
7
FINISHING
6
2 type finishing wire rope:
• BRIGHT/UNGALVANIS
• GALVANIS
Wire rope galvanis permukaan luarnya berwarna putih karena dilapisi zinc.
Keuntungannya lebih tahan karat daripada wire rope ungalvanis.
Wire rope ungalvanis keuntungannya lebih murah.
QUANTITY
7 Panjang Wire Rope yang akan digunakan, biasa dinyatakan dalam meter.
GRADE
8 Wire rope diproduksi berdasarkan beberapa grade. Setiap grade memberikan kombinasi
tensile strength, kekerasan, ketahanan terhadap gesekan dan tekukan yang berbeda.
Standard industri yang banyak dipakai untuk menentukan grade adalah A.P.I (American
Petroleum Institute) dan JIS (Japan Industrial Standard).
LUBRIKASI
9 Lubrikasi pada wire rope berfungsi mencegah karat dan mengurangi gesekan antar
strand dan wire didalam wire rope sehingga memperpanjang usia.
8
TIPS MEMILIH WIRE ROPE BERKUALITAS
Harga wire rope sangat bervariasi, mulai dari yang paling murah sampai yang paling mahal.
Supaya anda tidak salah pilih, pastikan:
1. Jika anda membeli wire rope berkualitas dari Korea, Jepang, atau Eropa, pastikan wire rope anda
datang dengan ID tape untuk memastikan wire rope yang anda terima benar-benar asli.
• Putaran wire rope tidak renggang. Wire rope yang renggang, saat dipotong ujungnya mudah
buyar dan saat dipakai cepat rusak.
Ujung wire rope yang renggang Perbandingan wire rope yang padat
dibagian bawah dan wire rope yang
renggang dibagian atas
9
3 Alasan mengapa wire rope dari PT. Anugrah Sukses
Marine lebih awet dan tahan lama:
1. Kami menyimpan wire rope didalam gudang terlindung dari hujan dan
panas matahari sehingga bebas dari karat.
2. Kami menyiapkan wire rope menggunakan Coiling Machine khusus sehingga mengurangi pasir dan
kerikil yang menempel dipermukaan membuat usia wire rope dan peralatan anda lebih awet.
3. Tahukah anda, bahwa penyiapan wire rope yang tidak hati hati dapat menyebabkan Kink & Core
wire rope patah sehingga wire rope cepat rusak?
10
REKOMENDASI KONSTRUKSI WIRE ROPE
Cranes Logging
1. Tower Cranes, Travelling Cranes, Portal Cranes, Trolleys 1. Logging rope 6x25 (FI) IWRC, 6x19 (SL) IWRC
Hoisting rope 6x36 (WS) IWRC
Trolley line 6x36 (WS) IWRC Shipping
2. Cranes with one-part Ropes, Travelling Cranes, Derricks 1. Vessels
Hoisting rope 6x36 (WS) IWRC, 19x7 IWRC Mooring rope 6x24+7HC, 6x37FC, 6x36 (WS) FC
Boom & Topping line 6x25 (FI) IWRC Towing rope 6x19FC, 6x24+7HC, 6x37FC
6x36 (WS) FC or IWRC
3. Slipway Ropes Anchor line 6x24+7HC, 6x36 (WS) FC
Winch rope 6x25 (FI) IWRC Rigging 7x7, 7x19
Boom line 6x25 (FI) FC
4. Electric Hoists Runners 6x25 (FI) FC, 6x36 (WS) FC
Electric Hoist 6x36 (WS) IWRC, 19x7 IWRC
2. Tug Boat
Towing rope 6x36 (WS) FC or IWRC
Earth Moving Equipment (Alat Berat) Mooring rope 6x24+7FC, 6x36 (WS) FC
1. Draglines 3. Fishing Industry 6x19 (SL) FC, 6x25 (FI) FC
Hoisting rope 6x36 (WS) IWRC, 6x25 (FI) IWRC
Boom line 6x25 (FI) IWRC Oil Industry
Drag line 6x19 (SL) IWRC, 6x25 (FI) IWRC
Pennants 6x25 (FI) IWRC 1. Cable tool drilling line 6x19 (SL) FC
2. Water well drilling line 6x25 (FI) FC
2. Clamshell 3. Coring, Sand, Swabbing line 6x7+FC
Holding & Closing line 6x36 (WS)IWRC 4. Casing line 6x19 class IWRC
Boom line 6x25 (FI) IWRC 5. Rotary drilling line 6x19 (SL) IWRC
6. Winch line 6x19 IWRC, 6x24+7FC
3. Shovels 7. Tong or Jerk line 6x37 FC
Hoists 6x36 (WS) IWRC 8. Cathead line 6x37 FC or IWRC
Digging line 8x31 (WS) IWRC 9. Tubing and sucker rod line 6x26 (WS) IWRC
Crowd rope 8x31 (WS) IWRC 10. Pumping unit or horsehead line 6x19 FC or IWRC
Guy line and Boom line 6x25 (FI) IWRC 6x37 FC or IWRC
11. Mast raising (swing) line 6x19 IWRC
4. Bulldozers 6x25 (FI) IWRC 6x37 IWRC
5. Dredges
Bow line, Stern line, Side line 6x19 (SL) FC or IWRC
6x25 (FI) FC or IWRC
Ladder hoists 6x36 (WS) FC or IWRC
Barge handling rope 6x25 (FI) FC
6x36 (WS) FC
Runners, Boom line, Swing line 6x25 (FI) FC or IWRC
6x36 (WS) FC or IWRC
Guy line 7x19
Mooring rope 6x24+7HC
11
REKOMENDASI KONSTRUKSI WIRE ROPE (LANJUTAN )
Mining Industry
1. Shaft hoisting rope
Shallow & deep vertical shaft 6x25 (FI) FC
Inclined shaft rope 6x19 (SL) FC
8. Cable puller, spotter, retarder rope 6x25 (FI) IWRC, 6x19 (SL) FC
Tower
12
TABLE
6x7 HC Galv
Application: Mining, Fishing, Cable Stay
Diameter Minimum Breaking Load Approx. Weight per
of Rope (mm) B & CG (180 kg/mm²) Kgf 100 meter (kg)
1.0 - -
1.5 127.00 0.80
2.0 240.00 1.38
3.0 540.00 3.11
4.0 960.00 5.54
5.0 1,500.00 8.65
6.0 2,160.00 12.50
6x12 + 7 HC
Application: Net, Lashing, Bundling, General Purpose
Diameter Minimum Breaking Load B & CG (180 kg/mm²) Approx. Weight per
of Rope (mm) A & BG (165 kg/mm²) Tonnef meter (kg/m)
Tonnef
3 0.32 - 0.023
4 0.56 - 0.042
5 0.89 0.94 0.063
6 1.28 1.36 0.091
8 2.27 2.42 0.161
9 2.88 3.06 0.204
10 3.56 3.77 0.251
11 4.30 4.57 0.304
12 5.13 5.43 0.362
15 8.47 8.90 0.565
16 9.11 9.65 0.643
18 11.51 12.23 0.813
13
6 x 19 (SL) FC
Application: Fishing, Marine, General Engineering
Diameter of Minimum Breaking Load Approx.
Rope (mm) A & BG (165 kg/mm²) B & CG (180 kg/mm²) C (200 kg/mm²) Weight per
Tonnef Tonnef Tonnef meter (kg/m)
8.0 3.55 3.78 4.30 0.247
9.0 4.50 4.78 5.43 0.312
10.0 5.55 5.91 6.71 0.386
12.0 8.00 8.50 9.4 0.555
14.0 10.90 11.60 12.80 0.756
16.0 14.20 15.20 16.80 0.988
18.0 17.90 19.20 21.20 1.250
6 x 19 + IWRC
Application: Crane, Hoist, General Purpose
Diameter Minimum Breaking Load Approx.
of Rope (mm) A & BG (165 kg/mm²) B & CG (180 kg/mm²) C (200 kg/mm²) Weight per
Tonnef Tonnef Tonnef meter (kg/m)
8 3.93 4.26 4.67 0.258
9 4.95 5.50 5.94 0.328
10 6.10 6.65 7.18 0.404
12 8.79 9.58 10.40 0.580
14 12.00 13.20 14.30 0.793
16 15.60 17.00 18.40 1.040
18 19.80 21.50 23.20 1.310
19.1 22.30 24.30 26.20 1.410
20 24.40 26.60 28.70 1.620
22.4 30.60 33.40 36.10 2.030
24 35.20 38.30 41.30 2.330
25 38.10 41.50 44.80 2.530
26 41.30 45.00 48.50 2.730
28 47.90 52.10 56.30 3.160
30 55.00 60.00 64.80 3.650
32 62.50 68.00 73.70 4.150
38 88.00 95.70 103.00 5.830
14
6x19 (SL) IWRC, 6x25 (FI) IWRC
Application: Crane, Hoist, Lifting, Logging, General Engineering
Diameter Minimum Breaking Load Approx.
of Rope (mm) A & BG (165 kg/mm²) B & CG (180 kg/mm²) C (200 kg/mm²) Weight per
Tonnef Tonnef Tonnef meter (kg/m)
8.0 4.16 4.50 4.80 0.275
9.0 5.27 5.71 6.08 0.348
9.5 5.86 6.35 6.77 0.388
10.0 6.50 7.40 7.50 0.430
11.2 8.51 8.83 9.41 0.539
12.0 9.63 10.10 10.50 0.619
12.5 9.90 11.00 11.90 0.672
14.0 12.40 13.80 14.90 0.843
16.0 16.20 18.00 19.40 1.100
18.0 20.50 22.90 24.60 1.390
19.1 23.10 25.80 27.70 1.570
20.0 25.40 28.20 30.40 1.720
22.4 31.80 35.30 38.10 2.160
24.0 36.50 40.50 43.80 2.480
25.0 39.70 44.00 47.50 2.690
26.0 42.90 47.60 51.40 2.910
28.0 49.70 55.20 58.80 3.370
30.0 57.10 63.40 67.40 3.870
32.0 64.90 72.00 76.80 4.400
38.0 93.90 101.70 108.00 6.210
6 x 24 + 7FC
Application: Net, Lashing, Fishing, Marine & General Engineering
Diameter Minimum Breaking Load Approx.
of Rope (mm) A & BG (165 kg/mm²) B & CG (180 kg/mm²) Weight per
Tonnef Tonnef meter (kg/m)
15
6x29 (FI) IWRC, 6x36 (WS) IWRC
Application: Crane, Hoist, Lifting, General Engineering
Diameter Minimum Breaking Load Approx.
of Rope (mm) A & BG (165 kg/mm²) B & CG (180 kg/mm²) C (200 kg/mm²) Weight per
Tonnef Tonnef Tonnef meter (kg/m)
8 4.05 4.36 4.91 0.282
9 5.12 5.52 6.21 0.367
10 6.33 6.81 7.67 0.441
12 9.11 9.90 11.10 0.635
12.5 10.10 10.80 12.00 0.689
14 12.70 13.60 15.00 0.864
16 16.60 17.60 19.60 1.130
18 21.00 22.30 24.80 1.430
19.1 23.70 25.20 27.90 1.610
20 25.50 27.60 30.60 1.760
22.4 32.00 34.70 38.40 2.210
24 36.70 39.80 44.10 2.540
25 39.90 43.10 47.90 2.760
26 43.10 46.70 51.80 2.980
28 50.00 54.20 60.10 3.460
30 57.40 62.10 69.00 3.970
32 65.30 70.70 76.20 4.510
34 73.70 79.80 86.20 5.100
36 82.60 90.20 97.00 6.710
38 92.10 100.00 110.30 6.370
40 102.00 111.00 122.20 7.050
42 112.00 123.00 131.00 7.780
44 123.00 135.00 148.70 8.530
50 159.00 171.00 192.00 11.000
52 172.00 182.00 207.00 11.900
54 186.00 203.00 220.00 12.900
56 200.00 218.00 241.00 13.800
64 261.00 286.00 - 18.100
68 295.00 322.00 - 20.400
72 331.00 - - 22.900
74 349.00 - - 24.100
16
6 x 37 + FC
Application: Marine, Crane, Hoist, General Engineering
Diameter Minimum Breaking Load Approx.
of Rope (mm) A & BG (165 kg/mm²) B & CG (180 kg/mm²) C (200 kg/mm²) Weight per
Tonnef Tonnef Tonnef meter (kg/m)
8 3.46 3.69 3.99 0.230
9 4.38 4.67 5.04 0.291
10 5.41 5.76 6.22 0.359
12 7.79 8.29 8.95 0.517
14 10.60 11.30 12.20 0.704
16 13.80 14.70 15.90 0.920
18 17.50 18.70 20.20 1.160
19.1 19.80 20.50 22.70 1.310
20 21.60 23.00 24.80 1.440
22.4 27.10 28.90 31.20 1.800
24 31.20 33.20 35.90 2.070
25 33.80 36.00 38.90 2.250
26 36.60 38.90 42.00 2.430
28 42.40 45.20 48.80 2.820
6 x 37 + IWRC
Application: Crane, Hoist, Lifting, Sling, General Engineering
Diameter Minimum Breaking Load Approx.
of Rope (mm) A & BG (165 kg/mm²) B & CG (180 kg/mm²) C (200 kg/mm²) Weight per
Tonnef Tonnef Tonnef meter (kg/m)
8 3.95 4.16 4.49 0.255
9 5.00 5.26 5.68 0.323
10 6.05 6.50 7.02 0.398
12 8.72 9.37 10.10 0.573
14 11.90 12.80 13.80 0.781
16 15.50 16.60 17.90 1.000
18 19.50 21.00 22.70 1.290
19.1 22.00 23.70 25.60 1.450
20 24.20 26.00 28.10 1.600
22.4 30.40 32.60 35.20 2.000
24 33.40 35.90 38.80 2.300
25 37.70 40.50 43.70 2.500
26 41.00 44.00 47.50 2.680
28 47.50 51.00 55.10 3.130
30 54.50 58.50 63.20 3.580
40 96.50 104.00 112.00 6.400
50 151.20 162.50 175.50 9.950
17
19x7 IWRC
Application: Crane & Hoist
Diameter Minimum Breaking Load Approx. Weight per
of Rope (mm) B & CG (180 kg/mm²) Tonnef meter (kg/m)
8 4.19 0.270
9 4.91 0.330
10 6.06 0.420
11 7.15 0.510
12 9.44 0.600
13 10.00 0.670
14 12.84 0.830
16 16.81 1.070
19 23.64 1.530
20 31.59 1.700
22 32.00 2.000
25 51.00 2.650
28 40.00 3.330
8x19 (SL) FC
Application: Elevator
Diameter of Minimum Breaking Load Approx. Weight per
Rope (mm) B & CG (180 kg/mm²) Tonnef meter (kg/m)
8 3.00 0.220
10 5.23 0.350
12 5.96 0.500
12.7 6.47 0.550
16 10.60 0.840
18
Wire Rope Sling
Sling Kawat Baja
19
PEMESANAN WIRE ROPE SLING
Wire Rope Sling adalah wire rope yang salah satu ujungnya sudah diterminasi.
20
Informasi yang diperlukan untuk membuat Wire Rope Sling:
2. Jenis Terminasi ( Hand splice, mechanical splice, socket, atau stop end.
Panjang jadi
Panjang jadi
21
KEUNTUNGAN WIRE ROPE SLING PT. ANUGRAH SUKSES MARINE
Mengapa Wire Rope Sling yang diproduksi PT. Anugrah Sukses Marine lebih aman digunakan?
23
TIPS MEMBELI RIGGING RRT
1. Pastikan rigging yang anda terima ukurannya standard, tidak kurang / banci.
24
LIFTING SHACKLE
25
Bolt & Nut Shackle Omega
(G-2130)
26
SHACKLE LAIN-LAIN
WIRE CLIP
Wire Clip Crosby G-450 Fist Grip Clip G-429 Wire Clip Galvanized RRT Wire Clip Bulldog
Galvanized RRT
TURNBUCKLE
THIMBLE
27
RING CROSBY
Alloy Master Master Link Welded Master Link Weldless Ring Alloy Pear Shaped
Link A-342 Assembly A-345 Assembly A-347 S-643 Link A-341
RING PWB
HOOK RRT
28
HOOK CROSBY
Eye Hoist Hook Swievel Hook Clevis Sling Hook Sorting Hook Barrel Hook
S-1320 S-322AN A-1339 A-378 S-377
Clevis Sling Hook Clevis Shur-Loc® Eye Shur-Loc® Shur-Loc® Swievel Sliding Choker Hook
A-339 Hook S-1317 Hook S-1316 Hook S-326A A-350N
HOOK PWB
Eye Hook Eye Sling Hook Pinlok Sling Hook Eye Grab Hook Pinlok Grab Hook
29
WIRELOCK®
Wirelock® adalah cairan campuran yang digunakan untuk men-terminasi wire rope ke spelter socket.
Wirelock® mulai diproduksi tahun 1962, dan sudah digunakan lebih dari 40 tahun.
Wirelock® mengurangi resiko pekerjaan karena tidak membutuhkan cairan metal yang panas dan
dapat dikerjakan di lapangan pada segala cuaca.
Keuntungan memakai Wirelock®:
• Tidak menggunakan panas.
• Tidak menggunakan acid.
• Tidak memerlukan keahlian khusus.
• Tidak memerlukan peralatan mahal.
• Tidak membutuhkan tempat penyimpanan khusus.
• Tidak perlu menebak temperatur.
• Tidak memerlukan cairan metal panas yang berbahaya.
• Tidak membutuhkan waktu lama untuk kering.
• Tidak kehilangan lubrikasi di leher Socket.
Approvals:
• Llyod’s Register of Shipping
• Det Norske Veritas (DNV)
• United States Coastal Guard
• Registro Italiano Navale
• Germanischer Llyod
• United States Navy
• American Bureau of Shipping (ABS)
30
Crosby Open Spelter Socket
G-416
31
Crosby Closed Spelter Socket
G-417
* Diameter of pin must not exceed pin used on companion 416 socket. Reference adjacent page “D” dimension.
Cast Alloy Steel
32
SOCKET LAIN
LOAD BINDER
CLAMP
33
SWIEVEL
RIGGING LAIN-LAIN
Missing Link Crosby A-335 Eye Bolt Crosby Wire Rope Nipper RRT
S-279/M-279
Turnbuckle
34
Lifting Chain
Sling Rantai
35
PEMESANAN SLING RANTAI
Informasi yang diperlukan saat memesan Sling Rantai:
1 2 3 4 5 6 7
8 9 10 11
12 13 14 15
36
RANTAI CROSBY
SPECTRUM 8®
ALLOY CHAIN
• Alloy Steel.
• Heat Treated.
• Finish - Black Thermadep Coating.
• Permanently embossed with CG ( Crosby Group ) and 8 ( Grade ).
• Proof Tested to 2 times the working Load limit with certification.
* Proof Loaded 2 times the Working Load Limit. Minimum Ultimate Load is 4 times the Working Load Limit
For Choker hitch with minimum of 120 degrees angle of choke. WLL must be reduced by 20%. except when using the Crosby A - 1338 Cradle Grab Hook
SPECTRUM 10®
ALLOY CHAIN
• Alloy Steel.
• Heat Treated.
• 25% stronger the Grade 80 Alloy Chain.
• Permanently embossed with CG ( Crosby Group ) and 10 ( Grade ).
• Finish - Black Thermadep Coating.
• Proof Tested to 2 times the working Load limit with certification.
• Standard container - fiber drum.
37
GRADE 100 ALLOY CHAIN recommended for overhead lifting applications.
* Proof Loaded 2 times the Working Load Limit. Minimum Ultimate Load is 4 times the Working Load Limit
GRADE 100 (Spectrum 8) Alloy Chain Working Load Limit - 4 to 1 Design Factor
For Choker hitch with minimum of 120 degrees angle of choke. WLL must be reduced by 20%. except when using the Crosby A - 1338 Cradle Grab Hook
* Ultimate Load is 4 times the Working Load Limit. For Grade 6 Lok-A-Loy
38
RANTAI PBW
PWB Anchor Limited, Australia’s leading chain manufacturer continues to produce its high quality of lightweight
strength, durability, and safety with the Herc-Alloy 800 range of chains and fittings.
Recognised by the Australian regulatory authorities for industrial lifting applications, Herc-Alloy 800 is manufactured to
exacting quality control standards, Herc-Alloy is manufactured from hardened and tempered steels to meet the critical
requirements of this grade and has a high resistance to impact and wear. Herc-Alloy 800 is tested to load in excess of
60% of the Minimum Breaking Load. Test certificates are available on request.
Available in Self Colour, Painted and Galvanised finishes, Herc-Alloy 800 chain is available from 6.0 mm to 31.7mm sizes.
Note : Herc-Alloy 800 chain may be supplied with the following identification markings
HA800 CM; PWB HA800; PWB HA; HA CM; CMU HA800; G80; G800; HA800; HA8
39
HammerlokTM
The Hammerlok’s simple design allows instant assembly, dismantling and reassembly of dependable safe slings. Assem-
ble only one chain or fitting to each Hammerlok body half. When reassembling a Hammerlok, we recommend you use a
new pin and stud assembly. These are inexpensive and readily available.
40
Chain
Rantai
41
RANTAI LAIN
Rantai Lain:
• Rantai Stainless Steel
• Rantai Galvanis
• Rantai Hitam / S. Color
Untuk Aplikasi:
• Dapra
• Lashing
• Pagar
• Dekorasi
Dimensi Rantai Galv/Hitam
Diameter (d) Type Berat per Dimensi
karung Panjang Panjang Lebar Lebar
Dalam (b) Luar (b+d) Dalam Luar (a)
3 mm 1/8” Short link 50 / 100 kg 16 mm 22.4 mm 5.6 mm 12 mm
4 mm 5/32” Short link 50 / 100 kg 18.5 mm 26.5 mm 6.5 mm 14.5 mm
5 mm 3/16” Short link 50 / 100 kg 19 mm 28.4 mm 7.6 mm 17 mm
6 mm 1/4” Short link 50 / 100 kg 22 mm 34.7 mm 8.3 mm 21 mm
8 mm 5/16” Short link 50 / 100 kg 26 mm 42 mm 10.12 mm 26 mm
10 mm 3/8” Short link 50 / 100 kg 28 mm 47 mm 13 mm 32 mm
12 mm 1/2” Short link 50 / 100 kg 39 mm 64.4 mm 17.6 mm 43 mm
16 mm 5/8” Medium 50 / 100 kg 60 mm 91.6 mm 25.1 mm 56.7 mm
link
18 mm 3/4” Medium 50 / 100 kg 76 mm 114 mm 31 mm 69 mm
link
22 mm 7/8” Medium 100 / 200 kg 90 mm 134.4 mm 35.6 mm 80 mm
link
24 mm 1” Medium 250 / 300 kg 105 mm 155.8 mm 44.2 mm 95 mm
link
42
TIPS MEMBELI RANTAI
Walau sekilas tampilannya mirip, tidak semua rantai kualitasnya sama.
Untuk mendapatkan rantai yang berkualitas sehingga tahan lama, perhatikan hal-hal berikut :
43
Rantai dengan sambungan yang kasar Rantai yang disambung hanya pada
sehingga cepat rusak bagian luar, bagian dalam tidak dilas
sehingga mudah patah
4. Pastikan bungkusan rantai 2 lapis, karung di bagian luar & lapisan plastik di bagian dalam
supaya tidak berkarat dan tahan lama.
5. Pastikan ukuran mata rantai standard, tidak banci sehingga mudah saat disambung.
44
Rope
Tali
45
PANDUAN MEMILIH TALI:
Sisal Manila Polyethylene Polypropylene Polypropylene Nylon
(PE) Monofilament Multifilament
(PP Mono) (PP Multi)
Konstruksi 3 strand 3 strand 3 & 4 strand 3 & 8 strand 3 & 8 strand 3 & 8 strand
Ukuran
Diameter: 6 - 24mm 6 - 64mm 6 - 24mm 6 - 144mm 6 - 96mm 6 - 96mm
Circumference: 3/4” - 14” 3/4” - 12” 3/4” - 12”
Breaking Strength 4.0-5.0 5.0-6.0 6.0 6.5 n/a 7.0-9.5
gram/denier
Kekuatan saat basah s/d 120% s/d 120% s/d 120% 100% 100% 85-90%
Kemampuan menerima Buruk Buruk Sedang Cukup Baik Baik Sangat Baik
gentakan
Karakteristik di air Tenggelam Tenggelam Mengapung Mengapung Tenggelam Tenggelam
Kemampuan stretch 10-12% 10-12% 15-25% 15-25% 18-25% s/d 40%
Kemampuan menyerap 100% 100% 0% 0% 2-8% 2-8%
air
Ketahanan terhadap Baik Baik Baik Buruk Baik Baik
sinar
matahari
Ketahanan terhadap Buruk Buruk Sangat Baik Sangat Baik Sangat Baik Sangat Baik
embun dan
pembusukan
Ketahanan terhadap
gesekan:
Di permukaan Sedang Baik Baik Baik Sangat Baik Sangat Baik
Di bagian dalam Sedang Sedang Baik Baik Sangat Baik Sangat Baik
Ketahanan terhadap
panas
meleleh pada suhu: 176.6 ⁰C 176.6 ⁰C 135 ⁰C 165.5 ⁰C n/a 215-249 ⁰C
Ketahanan terhadap Buruk Buruk Sangat Baik Sangat Baik Sedang Sedang
Acid
Ketahanan terhadap Buruk Buruk Sangat Baik Sangat Baik Sangat Baik Sangat Baik
Alkali
Ketahanan terhadap Buruk Buruk Sangat Baik Sangat Baik Sangat Baik Sangat Baik
minyak & gas
Warna Coklat Muda Coklat Variasi Putih strip biru Putih Putih
46
PEMAKAIAN UMUM & CARA PENYIMPANAN TALI:
Material Pemakaian Penyimpanan
Sisal · Perikanan, Packing, Mengikat · Tempat kering
· Keperluan industri & rumah tangga · Hindari sinar matahari langsung
· Hindari bahan kimia mengandung
acid , alkali dan bensin
Manila · Perikanan, Boat, Dekorasi · Tempat kering
· Hindari sinar matahari langsung
· Hindari bahan kimia mengandung
acid, alkali dan bensin
Polyethylene (PE) · Perkebunan, Perikanan, Mengikat · Tempat kering/basah
· Alat alat olah raga · Hindari sinar matahari langsung
· Keperluan industri & rumah tangga
Polypropylene · Perkebunan, Perikanan, Mengikat · Tempat kering/basah
Monofilament (PP Mono) · Alat alat olah raga, Towing Line · Hindari sinar matahari langsung
· Mooring Line, Keperluan industri
& rumah tangga
Polypropylene · Perikanan, Perkapalan, Mengikat · Tempat kering/basah
Multifilament (PP Multi) · Towing Line, Mooring Line · Hindari sinar matahari langsung
· Keperluan industri
Nylon · Perikanan, Perkapalan, Mengikat · Tempat kering/basah
· Towing Line, Mooring Line · Hindari sinar matahari langsung
· Keperluan industri
* Perhatian:
1) Tali tidak boleh dikeringkan dengan cara dipanaskan dekat api, kompor atau sumber panas lainnya.
2) Tali tidak direkomendasikan untuk aplikasi mengangkat barang (Overhead lifting). Untuk mengangkat gunakan wire rope, webbing
sling atau rantai grade 80 atau 100.
* Tips:
1) Untuk memperpanjang usia pakai tali hindari gesekan dengan benda & permukaan tajam.
MENGORDER TALI
47
TIPS MEMBELI TALI
1. Pastikan tali yang anda beli dalam kondisi baru, tidak bekas.
2. Pastikan berat tali yang anda terima sesuai dengan yang anda bayar.
48
TALI 3 STRAND
TALI 8 STRAND
49
TALI MANILA 3-STRAND
UKURAN
Dia (mm) Dia (Inch) Cir (Inch) M.B.L (Ton) Berat (Kg) Panjang (Mtr)
4 mm 3/16” 1/2” 0.16 5.00 330
6 mm 1/4” 3/4” 0.33 10.50 330
8 mm 5/16” 1” 0.48 13.50 250
10 mm 13/32” 1-1/4” 0.64 17.50 220
12 mm 1/2” 1-1/2” 0.95 24.50 220
14 mm 9/16” 1-3/4” 1.28 31.00 220
16 mm 5/8” 2” 1.78 42.00 220
19 mm 3/4” 2-3/8” 2.13 52.50 220
20 mm 13/16” 2-1/2” 2.84 61.00 220
22 mm 7/8” 2-3/4” 3.40 72.50 220
24 mm 1” 3” 4.06 89.00 220
28 mm 1-1/8” 3-1/2” 5.33 118.00 220
32 mm 1-1/4” 4” 6.86 155.00 220
36 mm 1-7/16” 4-1/2” 8.64 199.00 220
38 mm 1-1/2” 4-3/4” 9.65 221.00 220
40 mm 1 5/8” 5” 10.40 242.00 220
45 mm 1-3/4” 5-5/8” 12.70 296.00 220
48 mm 1-15/16” 6” 14.70 349.00 220
50 mm 2” 6-1/4” 16.77 368.00 220
56 mm 2-1/4” 7” 19.80 475.00 220
60 mm 2-3/8” 7-1/2” 22.60 500.00 220
64 mm 2-1/2” 8” 25.70 580.00 220
UKURAN
Dia (mm) Dia (Inch) Cir (Inch) M.B.L (Ton) Berat (Kg) Panjang (Mtr)
6 mm 1/4” 3/4” 2.00 100
8 mm 5/16” 1” 3.40 100
10 mm 13/32” 1-1/4” 5.40 100
12 mm 1/2” 1-1/2” 7.20 100
50
Anchor & Anchor Chain
Jangkar & Rantai Jangkar
51
TIPS MEMBELI JANGKAR, RANTAI JANGKAR, DAN AKSESORIS
3 Hal yang harus diperhatikan saat membeli Jangkar, Rantai Jangkar, dan Aksesoris:
Sertifikat Llyod untuk Rantai Jangkar Sertifikat CCS untuk Jangkar
dan aksesoris
3. Cocokkan nomor sertifikat dan fisik barang untuk memastikan barang sesuai.
52
JANGKAR KODOK
HALL TYPE STOCKLESS ANCHOR
Nominal L L1 L2 H H1 B
Weight ( Kg )
100 540 378 750 91 395 230
125 580 405 810 97 425 248
150 612 432 855 104 452 264
180 650 459 910 111 480 280
240 720 510 1010 122 530 310
280 760 534 1060 130 560 325
300 770 540 1080 131 570 331
320 790 560 1100 132 580 338
360 820 580 1150 139 610 353
420 860 610 1200 146 640 370
480 900 640 1260 153 670 387
520 920 652 1295 158 680 400
570 950 670 1330 162 700 408
660 1000 710 1440 170 740 430
780 1060 750 1480 180 780 456
850 1090 770 1530 185 800 468
900 1110 780 1550 189 820 477
1020 1160 820 1620 197 860 500
1140 1200 850 1680 204 890 520
1290 1250 880 1750 212 920 540
1440 1300 920 1820 221 960 560
1590 1340 950 1880 228 990 580
1740 1380 980 1930 235 1020 600
1920 1430 1010 2000 243 1060 620
2100 1470 1040 2060 250 1090 640
2280 1510 1070 2110 257 1120 650
2460 1550 1100 2170 264 1150 670
2640 1590 1120 2230 270 1180 690
2850 1630 1150 2280 277 1210 700
3060 1670 1180 2340 284 1240 720
3300 1710 1210 2390 291 1270 740
3540 1750 1240 2450 298 1290 750
3780 1790 1260 2510 304 1320 770
4050 1830 1290 2560 311 1350 790
53
JANGKAR DANFORTH
DANFORTH ANCHOR
Weight A B C D E F G
(lbs) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
8 201 322 133 312 27 24 81
16 253 406 168 394 34 30 102
30 312 500 207 485 42 37 126
50 370 594 246 576 50 44 149
75 424 680 281 659 57 50 171
100 467 748 309 725 63 55 188
150 534 856 354 830 72 63 216
200 588 842 390 914 80 69 237
300 673 1079 446 1046 91 79 272
330 695 1114 461 1080 94 82 280
350 709 1136 470 1101 96 83 286
400 741 1187 491 1151 100 87 299
450 770 1235 511 1197 104 91 311
500 798 1279 529 1240 108 94 322
600 848 1359 562 1318 115 100 342
750 913 1469 606 1419 124 109 369
800 933 1496 619 1450 126 110 378
900 971 1556 643 1508 131 114 392
1000 1005 1611 666 1562 136 118 406
2000 1267 2030 840 1968 171 149 511
2500 1365 2187 904 2120 185 161 550
3000 1450 2324 961 2253 196 171 585
4400 1648 2641 1092 2560 223 194 664
5000 1719 2756 1140 2671 233 203 694
54
RANTAI JANGKAR
ANCHOR CHAIN / STUD LINK CHAIN
55
AKSESORIS RANTAI JANGKAR
ANCHOR CHAIN ACCESSORIES
56
Marine Safety
Alat Keselamatan di Laut
57
LIFERAFT & ACCESSORIES
Throw-Overboard Inflatable Liferaft
1996 amendment to the International Convention for the Safety of Life at Sea 1974 and MSC.48 (66) The International Life-Saving Appliance
Code and Register of Shipping of the People’s Republic of China «Technical Regulation for Statutory Surveys of Sea-going Ships Engaged
on International Voyages» 1999.
58
PYROTECHNIC SIGNAL
LAIN - LAIN
Fireproof Lifeline
59
Webbling Sling, Anode &
Polyform
60
SYNTHETIC WEBBING SLING
Eye to Eye
Endless
Roundsling
* Anyaman samping dan penutup mata melindungi Webbing Sling dan memperpanjang usia pakai
61
ANODE
Zinc Anode
Type B (Bolted Type)
Type Dimension AxBxC Weight (kg)
B2 150x75x25 1.46
B3 200x100x20 2.5
B4 200x100x30 3.6
B5/B6 200x100x40 5.9
B8 300x150x25 7.3
B9 300x150x30 8.3
Type S (Welded Type)
Type Dimension AxBxC Weight (kg)
S2 150x75x25 2
S3 200x100x20 3
S4 200x100x30 4.2
S6 300x150x20 6.5
S8 300x150x25 8
S9 300x150x30 9.5
S9E 300x150x40 12
Aluminium Anode
Type Dimension BxCxD Weight (kg)
W 130 270x150x30 3.2
W 111 395x150x30 5.2
W 114 550x127x50 9.8
W 117 550x130x65 11.6
W 119 550x130x75 14.1
62
POLYFORM
63
Block
Tackle
64
SNATCH BLOCK
Snatch Block Single with Eye / Hook
Ukuran S.W.L Untuk Wire
4” 1 Ton 10mm
5” 1.5 Ton 13mm
6” 2 Ton 16mm
7” 3 Ton 19mm
8” 4 Ton 22mm
10” 5 Ton 25mm
12” 6 Ton 28mm
14” 7.5 Ton 32mm
65
MARINE BLOCK
HC Series Marine Block Single with Eye
Ukuran S.W.L Masuk Tali
8” 3 Ton 16-20 mm
10” 3 Ton 16-20 mm
12” 5 Ton 20-22 mm
14” 5 Ton 20-24 mm
16” 10 Ton 24-26 mm
17” 16 Ton 26-28 mm
18” 20 Ton 26-28 mm
66
WOODEN BLOCK
Wooden Block Single with Eye / Hook
Ukuran S.W.L Untuk Tali
(Kg) (MM)
6” 816.50 14
8” 1,270.00 18
10” 1,814.40 22
12” 2,268.00 24
67
CROSBY BLOCK
Crosby 408 Light Champion Crosby 418 Light Champion Crosby 420 Champion Snatch
Snatch Block Double w Hook Snatch Block Single w Hook Block w Hook
Crosby 409 Light Champion Crosby 419 Light Champion Crosby 420 Champion Snatch
Snatch Block Double Shackle Snatch Block Single Shackle Block Shackle
68
Electrical
Alat Listrik
69
LAMPU PENDANT
CCD6-2 Lampu Pendant Aluminium
Voltage: 220V
Power: 60W
Lamp Holder: E27
Weight: 1.05 kg
Protection class: IP56
Voltage: 220V
Power: 60W
Lamp Holder: E27
Weight: 2.05 kg
Protection class: IP55
Voltage: 220V
Power: 60W
Lamp Holder: E27
Weight: 2.3 kg
Protection class: IP55
CCD6-2, CCD2-1-2, dan CCD4-1 terbuat dari aluminium tahan karat digunakan untuk penerangan di kabin atau tempat basah seperti di dek dan sidewalk.
Voltage: 220V
Power: 60W
Lamp Holder: FE26 / FB22
Weight: 1.6 kg
Protection class: IP56
Voltage: 24V
Power: 15W
Lamp Holder: FE12 / FE14 / FB15
Weight: 0.6 kg
Protection class: IP56
70
WB-2 Lampu Pendant Bengkok
Voltage: 220V
Power: 60W
Lamp Holder: FE26 / FB22
Weight: 0.85 kg
Protection class: IP56
• DS7-2M, DS7-1M, WB-2 terbuat dari Engineered Resin sehingga tidak berkarat .
• conform to: JISF8414-1990 standard, Approved by CE.
• Digunakan untuk menerangi tempat basah seperti kabin, dek, dan sidewalk.
Voltage: 24V/220V
Power: 25W/40W
Lamp Holder: E27/B22d
Weight: 0.55 kg
Voltage: 24V
Power: 40W
Lamp Holder: E27/B22d
Weight: 0.3 kg
71
SEARCH LIGHT / LAMPU SOROT
CTG3
TG14
TG-2B
• CTG3, TG14, dan TG-2B digunakan untuk menerangi area yang luas seperti di dok, pelabuhan, tambang, tempat konstruksi, dll.
• Bagian dasar CTG 3 dilengkapi ball plates dengan lever untuk meningkatkan flexibilitas dan memudahkan operasi.
72
LAMPU NAVIGASI SINGLE
CXH1-11P CXH2-11P
full plastic starboard full plastic port light
light
CXH3-11P CXH4-11P
full plastic masthead full plastic sternlight
light
CXH6-11P
full plastic all-round
light
73
LAMPU NAVIGASI SINGLE
CXH1-1P CXH2-1P
full plastic starboard full plastic port light
light
CXH3-1P CXH4-1P
full plastic masthead full plastic sternlight
light
CXH6-1P
full plastic all-round
light
TYPE NAME VISIBILITY LEVEL ARC LAMP BULB PROTECTION COLOR WEIGHT
HOLDER CLASS
CXH1-1P Full plastic 3n.m 112.5° Green 2.6 kg
starboard light
CXH2-1P Full plastic port 3n.m 112.5° Red 2.6 kg
light
24V 60W
CXH3-1P Full plastic 6n.m 225° Transparent 2.5 kg
B22d 110V 65W IP56
masthead light
220V 65W
CXH4-1P Full plastic stern 3n.m 135° transparent, 2.7 kg
light yellow
CXH6-1P Full plastic 3n.m 360° Red Green, 2.2 kg
all-round light Transparent
74
LAMPU NAVIGASI DOUBLE
CXH1-101P - full plastic CXH2-101P - full plastic
double - deck starboard light double - deck port light
TYPE NAME VISIBILITY LEVEL ARC LAMP BULB PROTECTION COLOR WEIGHT
HOLDER CLASS
CXH1-101P Full plastic double-deck 3n.m 112.5° Green 4.15 kg
starboard light
CXH2-101P Full plastic double-deck 3n.m 112.5° Red 4.15 kg
port light
230V 60W 60cd
CXH3-101P Full plastic double-deck 6n.m 225° Transparent 4.15 kg
P28S 115V 60W 60cd IP56
masthead light
24V 40W 60cd
CXH4-101P Full plastic double-deck 3n.m 135° transparent, 4.17 kg
sternlight grey, yellow
CXH6-101P Full plastic double-deck 3n.m 360° Red Green, 4.0 kg
all-round light Transparent
75
LAMPU NAVIGASI DOUBLE
CXH1-10P - full plastic CXH2-10P - full plastic
double - deck starboard light double - deck port light
TYPE NAME VISIBILITY LEVEL ARC LAMP BULB PROTECTION COLOR WEIGHT
HOLDER CLASS
CXH1-10P Full plastic double-deck 3n.m 112.5° Green 3.8 kg
starboard light
CXH2-10P Full plastic double-deck 3n.m 112.5° Red 3.8 kg
port light
24V 60W
CXH3-10P Full plastic double-deck 6n.m 225° Transparent 3.7 kg
B22d 110V 65W IP56
masthead light
220V 65W
CXH4-10P Full plastic double-deck 3n.m 135° transparent, 3.7 kg
sternlight yellow
CXH6-10P Full plastic double-deck 3n.m 360° Red Green, 3.6 kg
all-round light Transparent
76
MARINE PLUG, SOCKET & SWITCH
Marine Plug
T-1MA T-2MA
Voltage: 250V Voltage: 250V
Current: 20A Current: 20A
Dimension: 104 x ø 62 Dimension: 104 x ø 62
Lxø Lxø
T-1MB T-2MB
Voltage: 250V Voltage: 250V
Current: 20A Current: 20A
Dimension: 86x75x63 Dimension: 86x75x63
LxBxH LxBxH
Marine Switch/Socket
77
Measuring Instrument & Navigation
Alat Ukur & Navigasi
78
ALAT UKUR & NAVIGASI
PENGGARIS NAVIGASI BLUNDELL HARLING INGGRIS
Penggaris Sejajar / Mistar Jajar Penggaris Segitiga / Mistar Segitiga Penggaris Segitiga / Mistar Segitiga
Ukuran: 400 mm, 500 mm, 600 mm Ukuran: 200 mm, 230 mm Ukuran: 7”, 8”
CHRONOMETER CLINOMETER
COMPASS SEXTAN
79
Ladder, Net & Misc Equipment
Tangga, Jala Jala & Peralatan Lain
80
TANGGA & JALA JALA
81
MISC EQUIPMENT
Ukuran:
0.05 m³/hr
0.10 m³/hr
0.25 m³/hr
0.50 m³/hr
82
Percepat Transaksi Anda
Kepuasan anda sangat penting bagi kami.
Untuk mempercepat proses pengambilan & pengiriman barang ,
anda dapat membantu kami dengan cara:
1. Cantumkan nomor invoice & nama anda sebagai pesan saat melakukan transfer / pembayaran.
2. Bukti transfer di fax ke kantor atau di e-mail ke accounting@asmarines.com setelah melakukan
pembayaran. Up: pembayaran.
3. Konfirmasi untuk memastikan bukti transfer sudah diterima.
Tidak mau menunggu lama saat mengambil barang? Bantu kami dengan cara:
1. Konfirmasi sebelum datang mengambil barang. Setelah dana diterima, kami butuh 30 menit
untuk menyiapkan barang jadi, 1-2 jam untuk barang fabrikasi ringan seperti sling dan rantai kecil,
dan 2 jam keatas untuk sling ukuran besar tergantung jadwal produksi gudang.
2. Melunasi pembayaran sebelum datang mengambil barang.
3. Bawa copy DO/PO/Memo & informasi no polisi kendaraan anda saat mengambil barang.
0818 82 95 95
atau email ke
saran@asmarines.com
Supported by:
83
Quality Marine, Lifting & Rigging Equipment
PT . ANUGRAH SUKSES MARINE
JAKARTA
Showroom
Jl. Cengkeh No 19 F
Jakarta Barat 11110
Tel : (021) 691-9595
Fax : (021) 691-9696, 691-9797
Sms Inquiry : 0813-83-989898
email : marketing@asmarines.com
www.asmarines.com
84