R.E.M. (Rekayasa Energi Manufaktur) Jurnal | Vol. 5 (1) | ISSN 25283723 (online)
*
Mochamad Hisam Alamsyah, Gugun Gundara
Program Studi Teknik Mesin, Fakultas Teknik, Universitas Muhammadiyah Tasikmalaya, Jl. Tamansari km 2.5
Gobras, Tasikmalaya Kode pos 46196 Telp. 0265 2350982, Tasikmalaya, Indonesia
*
Email Penulis Korespondensi: gugun@umtas.ac.id
Abstract. The purpose of this research to analyze composite material reinforced tesk wood powder and brass powder
and epoxy resin matrix as brake pads material. The mixture of composite brake pads divided into three kinds which are
Specimen A, Specimen B, Specimen C, with different material composition next made to be mixing process, compacting,
and sintering. This testing done with way hardness test Brinell method, test of wear rate use tool of Ogoshi high speed
universal wear testing machine produce data of highest hardness composite owned by Spsecimen A with score 10 HBN
and highest wear rate owned by Specimen C with score 0.0004 Kg/mm2. Composite material teak wood powder and
brass powder and epoxy resin matrix have character of mechanics if composite have score of high hardness score so
wear rate will more low and otherwise if composite have score of low hardness score so the wear rate will more high.
Keywords- Composite; powder; wood; brass; pad; brake; resin.
Abstrak. Penelitian ini bertujuan untuk menganalisa material komposit berpenguat serbuk kayu jati dan serbuk
kuningan beserta matriks resin epoxy sebagai bahan kampas rem. Campuran komposit bahan kampas rem ini dibagi
menjadi 3 jenis yaitu Spesimen A, Spesimen B, Spesimen C, dengan komposisi bahan yang berbeda selanjutnya dibuat
melalui proses mixing, compacting, beserta sintering. Pengujian ini dilakukan dengan cara uji kekerasan melalui
metode Brinell, tes laju keausan menggunakan alat Ogoshi high speed universal wear testing machine yang meng-
hasilkan data kekerasan komposit tertinggi dimiliki oleh Spsesimen A dengan nilai 10 HBN serta laju keausan tertinggi
dimiliki oleh Spesimen C dengan nilai 0.0004 Kg/mm2 . Material komposit serbuk kayu jati dan serbuk kuningan serta
matriks resin epoxy memeiliki sifat mekanik jika komposit memeiliki nilai kekerasan besar maka laju keausannya akan
semakin rendah begitu pula sebaliknya apabila komposit memiliki nilai kekerasan kecil maka laju keausannya akan
semakin tinggi.
Kata Kunci- Komposit; Serbuk; kayu; Kuningan; kampas; rem; resin
How to cite: Hisam Alamsyah Mochamad, Gundara Gugun (2020) Analysis of Mechanical Properties Character of Mechanics Composite Brake
Pads Material Reinforced by Teak Wood Powder and Brass Powder. R.E.M. (Rekayasa Energi Manufaktur) Jurnal 5 (1). doi:
10.21070/rem.v%vi%i.870
http://doi.org/10.21070/rem.v%vi%i.870
10 Page
• Memiliki sifat mekanik yang baik • Saring bahan serbuk kayu jati dan serbuk kuningan
• Tidak mudah korosif dengan ukuran pengayakan 8 mesh.
• Bahan baku yang mudah diperoleh • Campurkan bahan serbuk kayu, serbuk kuningan
• dengan harga yang lebih murah dalam gelas dan aduk menggunakan mixer dengan
komposisi sebagai beriku
• Memiliki massa jenis yang lebih
• rendah dibanding dengan serat mi- Pencampuran komposisi bahan baku harus benar-benar
• neral tercampur secara merata agar saat pembuatan spesimen
• Mampu berfungsi sebagai peredam bahan melekat secara sempurna agar hasilnya ttidak
• suara yang baik mudah pecah/rusak. [9]
Copyright © 2020 Author [s]. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or
reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is
cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
Page 11
7. Apabila proses pengujian telah dilakukan selanjut Pada grafik terlihat grafik laju uji keausan yang dimana
nya masukan data hasil pengamatan kedalam per- grafik tersebut menunjukan spesimen C dengan rasio per-
samaan1 dibawah ini bandingan campuran 60% matriks : 40% penguat memi-
liki laju keausan yang paling tinggi yaitu sebesar 4.09 ×
B.B03
W s = 8.r.po.lo (1) 10−4 mm2 /kglalu pada posisi kedua ada spesimen B
Uji kekerasan (Brinell) yang memiliki rasio campuran 50% matriks : 50% pen-
guat , dan yang terakhir adalah spesimen A dengan rasio
1. Siapkan spesimen kanvas rem yang ingin di uji. campuran 40% matriks : 60% penguat.
Uji keke rasan
2. Gosok dengan kertas pasir medium ukuran 300
Dari grafik tersebut terlihat grafik uji kekerasan
mikrometer hingga permukaan rata dan mengkilap
yang dimana spesimen A dengan rasio campuran 40%
3. Pasangkan indentor. matriks : 60% penguat memiliki nilai HBN tertinggi
yaitu 10kg/mm2 lalu diurutan kedua spesimen B den-
4. Letakan spesimen pada dudukan plat. gan rasio campuran 50% matriks : 50% penguat den-
gan nilai 8.8kg/mm2 serta yang paling lunak diantara
5. Tentukan beban yang akan dipakai sesuai (ASTM tiga spesimen diatas adalah spesimen C rasio campuran
E10-01, 2003) 60%Matriks:40%Penguat pada angka 6.1kg/mm2 Sama
6. Siapkan spesimen kanvas rem yang ingin di uji. dengan yang dilakukan penelitian oleh [10] bahwa vari-
asi persentase komposisi berpengaruh pada karakteristik
7. Gosok dengan kertas pasir medium ukuran 300 bahan komposit kampas rem. Nilai kekerasan meningkat
mikrometer hingga permukaan rata dan mengkilap seiring dengan bertambahnya komposisi arang tempurung
kelapa pada bahan komposit, sedangkan massa keausan
8. Pasangkan indentor. menurun.
Di dukung pula dengan penelitian , [11] nilai kek-
9. Letakan spesimen pada dudukan plat.
erasan akan mengalami kenaikan seiring penambahan ser-
10. Tentukan beban yang akan dipakai sesuai (ASTM buk kayu.
E10-01, 2003)
K ESIMPULAN
2P
√
BHN = (π D)(D− D 2 −d2 )
(2)
Dari proses pengambilan data dan pembahasan dapat
diambil beberapa kesimpulan yang diantaranya sebagai
H ASIL P ENGUJIAN DAN P EMBAHASAN berikut
Hasil 1. Data kekerasan komposit tertinggi dimiliki oleh
Data ini merupakan hasil pengujian keausan dan kek- Spesimen A dengan nilai 10 HBN serta laju keau-
erasan dari spesimen komposit bahan kampas rem dengan san tertinggi dimiliki oleh Spesimen C dengan nilai
penguat serbuk kayu dan serbuk kuningan yang akan di 0.0004 Kg/mm2
uraikan dalam tabel sebagai berikut:Tabel Laju keausan
specimen (B=3 mm; r =13,3 ; P=2,12 Kg ; l=66,6 m) 2. Hasil grafik perbandingan antara nilai kekerasan dan
Pembahasan laju keausan dapat diketahui bahwa semakin banyak
Pembahasan data pengujian keausan dan uji kekerasan campuran penguat daripada matriks maka akan men-
pada spesimen komposit bahan kampas rem gasilkan komposit yang memiliki nilai kekerasan
Copyright © 2020 Author [s]. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or
reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is
cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
12 Page
Copyright © 2020 Author [s]. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or
reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is
cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
Page 13
yang lebih tinggi serta laju keausan yang semakin PURAN KOMPOSIT SERBUK GERGAJI KAYU
kecil. JATI DENGAN MATRIK EPOXY UNTUK MATE-
RIAL KAMPAS REM CAKRAM,” pp. 58–63,
3. Komposit kampas rem penguat serbuk kayu jati dan 2019. [Online]. Available: 10.30869/jtech.v7i2.385;
serbuk kuningan bisa dijadikan referensi Komposit https://dx.doi.org/10.30869/jtech.v7i2.385
bahan kampas rem yang ekonomis, sederhana, serta [9] A. J. Ibrahim and P. Prabowo, Studi Eksper-
ramah lingkungan. imen Pengaruh Kecepatan Fluidisasi Terhadap
Unjuk Kerja Swirling Fluidized Bed Coal Dryer.
Keausan, Dan Koefesian Gesek Kampas Rem:
R EFERENCES Lembaga Penelitian dan Pengabdian kepada
[1] A. Sudirman, K. K, I. Gunawan, A. Handayani, Masyarakat ITS, 2018, vol. 6, no. 2. [Online].
D. E. Hertinvyana et al., “Sintesis dan Karakter- Available: 10.12962/j23373539.v6i2.26353;https:
isasi Komposit Polipropilena/Serbuk Kayu Gergaji,” //dx.doi.org/10.12962/j23373539.v6i2.26353
Sains Materi Indonesia, vol. 4, no. 1, 2002. [10] H. T. Prabowo, S. Sulhadi, M. P. Aji, and T. Dar-
sono, “SIFAT MEKANIK BAHAN KOMPOSIT
[2] A. Bagaskara, S. Widodo, and C. Pramono, “Pen-
KAMPAS REM BERBAHAN DASAR SERBUK
garuh Serbuk Kulit Biji Mangga Sebagai Penguat
ARANG KULIT BUAH MAHONI,” SPEKTRA:
Komposit Kampas Rem Terhadap Sifat Mekanis
Jurnal Fisika dan Aplikasinya, vol. 2, no. 2, pp. 127–
“,” Mechanical Engineering Research Collection,
127, 2017. [Online]. Available: 10.21009/spektra.
vol. 2, no. 2, 2019.
022.06;https://dx.doi.org/10.21009/spektra.022.06
[3] T. D. Sutanto and A. Azis, “Inovasi Penggunaan Ser-
[11] A. Haryono and K. J. Nugroho, “Analisa Struk-
buk Kayu Berpenguat Serbuk Kuningan Terhadap
tur Mekanik dan Struktur Mikro Pada Piston Hasil
Sifat Mekanis Kampas Rem,” Intuisi Teknologi Dan
Proses Pengecoran Tempa,” Prosiding SNST, vol. 1,
Seni, vol. 8, no. 2, 2016.
no. 1, 2015.
[4] W. D. Callister, 2003.
[5] B. Widodo et al., “Analisa Sifat Mekanik Kom-
posit Epoksi Dengan Penguat Serat Pohon ren (ijuk)
Conflict of Interest Statement:
Model Lamina Berorientasi Sudut Acak (Random),”
The author declares that the research was conducted
Teknologi Technoscientia, vol. 1, no. 1, 2008.
in the absence of any commercial or financial relation-
[6] Kartiwa, 2009.
ships that could be construed as a potential conflict of
[7] Suhardiman, “Analisa Keausan Kampas Rem Non
interest.
Asbes Terbuat Dari Komposit Polimer Serbuk Padi
Tempurung Kelapa,” Inovtek Polbeng, vol. 7, no. 2,
Article History:
2017.
Received: 5 Mei 2020 | Accepted: 1 Juni 2020 | Pub-
[8] S. Arif, D. Irawan, and M. Jainudin, “ANALI- lished: 30 Juni 2020
SIS SIFAT MEKANIS PERBANDINGAN CAM-
Copyright © 2020 Author [s]. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or
reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is
cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.