Hardness Testing
Rockwell Tests :
Penetrator berbentuk
cone (C-Brale)
Bola besi dgn.
diameter 1/16-inch
hingga 1/2 -inch.
Beban Standard
Rockwell tests iaitu 60,
100 atau 150 Kg.
Brinell Test:
Beban 3000 kg dan waktu 30
dtk, utk. Logam dan bhn
keras lain nya.
Beban 500 kg dan waktu 60
dtk, utk bhn non-ferrous
(Brass or AL Mats)
Tdk dianjurkan untuk test
kekerasan bhn yg tipis.
BHN =
[ (
D / 2 D D d
2
)]
Tipe Material
METAL
BESI, COBALT, NIKEL, DLL
PENGHANTAR LISTRIK DAN
KONDUKTIVITAS
TINGGI
TEGANGAN TINGGI, KEKAKUAN
(STIFFNESS), KEKENYALAN
(DUCTILITY), PERUBAHAN PLASTIK
(PLASTIC DEFORMATION)
BISA DALAM BENTUK MURNI (TEMBAGA,
Cu) ATAU CAMPURAN (ALLOY) SPT
STEINLESS
STEEL (SS)
UMUMNYA TIDAK TAHAN KOROSI
KLASIFIKASI STEEL
MENURUT SAE (Society of Automotive
Engineers), spt SAE 1040 Digit ke 1 (1)
menunjukkan jenis karbon steel, Digit ke 2 (0)
tidak ada modifikasi Alloy. Digit ke 3 & 4 (40)
menunjukkan kandungan karbon sebanyak
0,40%.
Untuk Alloy diberikan tanda 2XXX, 3XXX, dst
AISI (The American Iron and Steel Institute)
SAE - AISI
Number
Classification
1XXX
Carbon steels
Low carbon steels: 0 to 0.25 % C
Medium carbon steels: 0.25 to 0.55 % C
High carbon steels: Above 0.55 % Carbon
2XXX
Nickel steels
5 % Nickel increases the tensile strength without reducing
ductility.
8 to 12 % Nickel increases the resistance to low
temperature impact
15 to 25 % Nickel (along with Al, Cu and Co) develop high
magnetic properties. (Alnicometals)
25 to 35 % Nickel create resistance to corrosion at
elevated temperatures.
3XXX
Nickel-chromium steels
These steels are tough and ductile and exhibit high wear
resistance , hardenability and high resistance to corrosion.
4XXX
Molybdenum steels
Molybdenum is a strong carbide former. It has a strong
effect on hardenability and high temperature hardness.
Molybdenum also increases the tensile strength of low
carbon steels.
5XXX
Chromium steels
Chromium is a ferrite strengthener in low carbon steels. It
increases the core toughness and the wear resistnace of the
case in carburized steels.
86XX
87XX
93XX
94XX
97XX
98XX
STAINLESS STEEL
Logam tahan korosi, biasanya mengandung
lebih 10,5% Cr, ini disebabkan adanya lap.
Oksida Kromium dipermukaan Logam.
Lapisan Oksida Kromium tsb. Dgn
sendirinya terbentuk apabila ter expose
dengan lingkungan oksigen, lap. Tersebut
akan hilang apabila terjadi Abrasif.
Kebaikan logam SS :
Tahan terhadap serangan korosi
Tahan terhadap suhu rendah (toughness pd
Cryogenic proses) atau suhu tinggi (high
strength)
Mudah di Pabrikasi
Memp. Sifat Keindahan (Aesthetic appeal )
Hygienic properties
Umur pakai yg lama (Life cycle
characteristics )
TIPE-TIPE LOGAM SS
Logam spt: chromium, nickel, molybdenum,
titanium, niobium dan logam lain nya sering
sebagai bhn. tambahan untuk menhasilkan
logam SS dgn grade tertentu.
Pada umumnya logam SS di katagorikan sbg:
Austenit
Ferritic
Martensitic dan Duplex
PENGGUNAAN :
computer floppy disk shutters (304)
computer keyboard key springs (301)
kitchen sinks (304D)
food processing equipment
architectural applications
chemical plant and equipment
304
316
0.15% max..
0.08% max
0.08% max
Chromium
17 - 19%
18 - 20%
16 - 18%
Manganese
2.0% max
2.0% max.
2.0% max.
Silicon
1.0% max.
1.0% max.
1.0% max.
Nickel
8 - 10%
8 10,5%
10 - 14%
----
----
2 - 3%
Carbon
Molybdenum
304
316
Tensile strength
(Ksi)
90 -185
84-185
84-185
Yield strength
(Ksi)
40-140
42-140
42-140
Elongation in 2
inches (Annealed)
50 %
55 %
50 %
Modulus of
elasticity (psi)
28 x 10 6
28 x 10 6
28 x 10 6
Hardness
(Annealed)
RB 75 - RB90
RB 75 - RB90
RB 75 RB90
Hardness (Cold
work)
RC 25 - RC39
RC 25 - RC39
RC 25 RC39
PENGGUNAAN :
automotive trim (430)
automotive exhausts (409)
Peralatan Tambang bt. bara (colliery
equipment) (3CR12)
hot water tanks (444)
PENGGUNAAN :
Mata Pisau
Alat Bedah (surgical instruments)
Poros (shafts)
Kumparan (spindles)
Pasak (pins)
POLIMER :
STRUKTURNYA BERULANG, SHG MEMP. BM
BESAR
RINGAN, TAHAN KOROSI, MUDAH DI PROSES PD
SUHU RENDAH DAN MURAH
TEGANGAN RENDAH (LOW STRENGTH), ULET
ISOLATOR YG BAIK
TERMOPLASTIK DAN TERMOSET