PERTEMUAN KE-8
NERACA MASSA
A. TUJUAN PEMBELAJARAN
Adapun tujuan pembelajaran yang akan dicapai sebagai berikut:
1.1 Mahasiswa mampu menghitung neraca massa pada suatu sistem proses.
B. URAIAN MATERI
Neraca massa merupakan rincian banyaknya massa yang masuk, keluar dan
menumpuk dalam suatu alat proses. Neraca massa diperlukan untuk menghitung
neraca energi dan merancang suatu alat proses. Neraca massa merupakan
penerapan dari hukum kekekalan massa terhadap suatu proses, dimana massa
jumlahnya tetap tidak dapat diciptakan maupun dimusnahkan.
Problem:
A Slurry containing 25% by weight of solids is fed into a filter. The filter
cake contains 90% solids and the filtrate contains 1% solids. Make a material
balance around the filter for a slurry feed rate of 2000 kg/h. For that feed rate,
what are the corresponding flow rates for the cake and the filtrate ?
Calculation Procedure
1. Sketch the system, showing the available data, indicating the unknown,
defining the system boundary, and establishing the basis for the calculations
2. Set up and solve the material balance equation
3. Check the results
C. TUGAS
1. Buatlah makalah yang berkaitan dengan perhitungan neraca massa pada
sistem proses industri kimia.
D. DAFTAR PUSTAKA
Anonim, 2015, “Kurikulum Teknik Kimia”, ProgramStudi Teknik Kimia-
Universitas Pamulang (UNPAM).
Hadiyanto, A. dan Widiasa, I.,N., 2015, “Modul Ajar Pengantar Teknik Kimia”,
Jurusan Teknik Kimia-Universitas Diponegoro (UNDIP).