Kamu memiliki UEFI-based PC dan menggunakan Windows 7 USB/DVD download tool untuk
membuat bootable Windows 8.1 installasi USB drive. Masuk ke settingan BIOS untuk
mengganti BIOS boot order dari drives dan tidak tahu mengapa Anda tidak dapat menemukan
USB drive yang ditandai sebagai UEFI bootable in the Boot Device Menu.
Dalam tutorial ini kita akan menunjukkan cara untuk membuat bootable USB flash drive untuk
Instalasi Windows 7 , Windows 8 , atau Windows 8.1 pada komputer berbasis UEFI .
Catatan:
Untuk boot komputer berbasis UEFI dari USB flash drive , drive harus diformat dengan
menggunakan sistem file FAT32.
FAT32 memiliki batasan ukuran file individu maksimum 4 GB dan ukuran volume
maksimum 32GB.
Windows 32-bit tidak didukung oleh Microsoft untuk booting komputer berbasis UEFI.
UEFI bekerja dengan skema partisi baru : GUID Partition Table (GPT)
Requirements:
Sebuah USB flash drive dengan minimal 4 GB
Windows 7 (64-bit) ISOatau
Anda juga dapat menggunakan DVD instalasi Windows bukan file ISO
Silahkan colokkan USB flash drive anda kedalama USB port yang tersedia sebelum melakukan
langkah-langkah dibawah ini.
Format Options:
icon and
New volume label: enter your desired label for the USB flash drive or leave the default
name.
Step 4: Click on the Start button then click on OK to confirm the warning.
The program will now start copying the ISO file to make your bootable UEFI USB flash drive.
And after more than 15 minutes, you will have a UEFI bootable USB to install Windows 8.1,
Windows 8 or Windows 7.
Step 3: Copy all files and folders in the ISO or DVD onto the newly created UEFI boot USB
flash drive.
(if you are creating a UEFI bootable USB flash drive for installing Windows 7, please continue
with step 4. If not, go to step 5)
Right-click on them > select Send to > select the Removable Disk with the volume letter
that you created in step 2 above.
Select the Removable Disk with the volume letter that you created in Step 2 above >
click on OK
Click on the Browse button > Select the Removable Disk with the volume letter that you
created in step 2 above > click on OK > click on OK
Step 4: if you are creating a UEFI bootable USB flash drive for installing Windows 7, please
follow
these
steps
below.
If
not,
go
to
step
5.
Navigate to your Removable Disk > efi > microsoft and copy the boot folder
Download
and
install
the
free
archive
manager
7-Zip.
Navigate
to
your
Removable
Disk
>
sources
Right-click on the install.wim file > select 7-zip > select Open archive and wait some seconds
for 7-zip to open it.
Right click on the bootmgfw.efi file > select Copy to > click the Browse button and select your
desktop > click OK > close 7-zip.
Step 5: You now have a UEFI bootable USB and are ready for installing Windows 8.1, Windows
8 or Windows 7.