How to install or replace a
badroom sink faucet
Wessel
Turn the oval shaped knob clockwise
and no need to use oil or lubricant then
if you don't have a shut-off Valve, turn
off the outside water after the water is
off turn on the tap and release any
je) c-y-FSIULe MAME Lmao
Fae) leler
Then adjusted with a wrench after which
disconnect the hot and cold lines.
his) [est
After disconnecting the supply line,
install the Mounting nut from the bottom
of the faucet holder. after everything is
disconnected let's remove the old
faucet.
Dari Infinix saya4.STEP4:
There is some dirt, we can take a Putty
knife, or even some cleaner to clean.
5:STEP5:
New faucet ready to be installed. just
YKexSom Tena VA
6.STEP6:
After the faucet is installed tighten the
morning nut.
Dari Infinix sayasila eve
Then reinstall the supply line and tighten
it with the appropriate wrench, and
screw the lifting rod back into the drain.
8.STEP8:
After that turn on the water again to
check for leaks.
9.STEP9:
Water ranning.
Dari Infinix saya