Prinsip kerja
berdasarkan pengubahan energi kinetis (kinetic-head)
dengan melewatkan aliran melalui penghalang.
Penghalang mengubah harga energi kinetis (kinetichead) menjadi energi statis (statichead).
Perubahan energi static pada upstream dan
downstream yangdideteksi dengan diferensial-pressure
-meter (DP-Cell) menyatakan harga energi aliran, dan
dapat dikonversi menjadi kecepatan aliran. Terjadi
penurunan tekanan statik setelah aliran melalui
penghalang yang disebut pressure drop
ps1
ps 2 v 2
v1
z1
z2
2g
2g
Qt
2( p1 p2 )
A2
1 ( A2 / A1 )
Harga koefisien discharge (Cd) tergantung pada harga bilangan Reynold aliran
(NR) dan perbandingan diameter terkecil lubang penghalang dengan diameter
pipa (b)
Standard AGA 3
AGA #3 adalah sebuah standar sebagai panduan
konstruksi dan instalasi orifice meter untuk
menjamin produk alat ukur yang akurat.
Pelat Orifice: berbentuk sirkular, flat device
Paddle plate
Universal plate
Kebutuhan spesifik untuk orfice:
Konsentrisitas lubang orifice
Permukaan
Kelurusan pelat
Ketebalan
AGA #3
Peralatan orifice
Orifice flange union
Single chamber orifice fitting
Dual chamber orifice fitting
AGA #3
Meter tubes
The purpose of tubing is to insure as smooth a flow profile, going
into the orifice plate, as possible. The AGA #3 standard has very
specific requirements for meter tube pipe, including the
smoothness of the inside surface of the tubing and minimum
lengths required under particular installations.
Secondary Devices
translate the raw information from primary
devices into more useable information.
The most common of these are pneumatic
chart recorders and flow computers.