Kepada Yth :
Bpk/Ibu: Purchasing / Engineering
di tempat
Dengan hormat,
Bersama surat ini kami dari PT. Multitech Industrial Indonesia memperkenalkan perusahaan kami
kepada Bapak/Ibu semua. Adapun perusahaan kami bergerak dalam bidang alat – alat teknik industri
dan spare part pompa gedung meliputi :
- Gland packing, asbestos, non asbestos, Teflon, Graphite, Kevlar.
- Mechanical seal single spring dan multi spring
- Oring Kit dan Cord dengan material (Vitone, Silicone, NBR, Nylone, Teflon, Neoprene, dll)
- Oil Seals NOK,TTO, CR, National, Hallite, CHO, Sakagami, seal hydroulic dan seal piston
- Gasket bentuk lembaran atau jadi sesuai dengan contoh
- Rubber sheet ( Natural, Nitril, Neoprene, EPDM, NBR, Teflon, Vitone & Silicone )
- Untuk Mechanical Seal, Oring dan Oil Seal selain material Ceramic dan plastic bisa
dipesan sesuai gambar atau contoh (sesuai pemesanan)
- Menerima Lapping & pollishing
- Macam-macam spare part pompa industri dan pompa gedung lainnya
- Pembuatan Spiral Wound Gasket (SWG) dan Butter Fly Valve
- Pembuatan Bushing, Impeller
- Repair/rekondisi Pompa dan mesin lainnya
- Pembuatan Spare Part alat-alat tehnik sesuai contoh dengan material: Silicon, Nylon,
Viton, Nitrile, NBR, Teflon, Neopren, Natural, Carbon, EPDM, Stainless, dll
- Menerima Fabrikasi dan pemasangan/instalasi pipa
Demikian surat perkenalan dari kami, untuk lebih jelasnya bisa hubungi kami atau lihat website
PT. Multitech Industrial Indonesia : www.mti-ind.com
Terima kasih dan kami tunggu bantuan serta kerjasamanya, semoga kita bisa menjalin kerjasama
dengan baik.
Salam
LIA
081382255669
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 0
CATALOG PT. MULTITECH INDUSTRIAL INDONESIA
Industrial Engineering & Fabrication
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 1
Gambar Mechanical Seal
MT-103CC MT-15CC
MT-FT301CC MT-55KCC
MT-60SS MT-60CC
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 2
MT-27SS MT-CG
MT-MG9SC MT-58CS
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 3
MT-G1SC MT-G OSS
MT-M74SC MT-MH7NCS
MT-U59SC MT-MSL
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 4
MT-FT MT-F
CRE-323 MT-G012
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 5
Product:
Pump Seal
Model Number:
MT-103CC
Description:
Stationary Ring(Plastic Carbon)
Rotary Ring(Ceramic)
Secondary Ring(NBR/VITON)
Spring and Retainer(S.S/Copper)
We supply mechanical seal and seal material,mechanical seal including pump seal, industrial pump seal,
auto cooling pump seal, shaft seal, seal ring, carbide seal, etc.
Model d1 d7 L1 L3
MT-103CC-16 16 28 25 7
MT-103CC-17 17 34 25 7
MT-103CC-18 18 34 25 7
MT-103CC-19 19 36 25 7
MT-103CC-20 20 36 25 7
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 6
Product:
Pump Seal
Model Number:
MT-15CC
Description:
Stationary Ring(Ceramic/SiC/TC)
Rotary Ring(Plastic Carbon/Carbon/SiC/TC)
Secondary Seal(NBR/EPDM/VITON)
Spring & Other Parts(SUS304/SUS316)
Model d1 d2 d6 d7 L1 L3
MT-15CC-8 8 16 13 18/21 18 7
MT-15CC-9 9 20 16 21 23 7
MT-15CC-10 10 20 16 20/22/24 23 7
MT-15CC-11 11 20 16 24 23 7
MT-15CC-12 12 22.5 17 26 24 7
MT-15CC-13 13 22.5 17 26 24 7
MT-15CC-16 16 28.5 22 32 27 8
MT-15CC-17 17 28.5 22 32 27 8
MT-15CC-18 18 31.5 25 35 29 8
MT-15CC-19 19 31.5 25 35 29 8
MT-15CC-20 20 33.5 27 38 31 8
MT-15CC-22 22 34.5 29 40 32 8
MT-15CC-25 25 37.5 32 44 33 9
MT-15CC-28 28 40.5 34 46 34 9
MT-15CC-30 30 44.5 38 50 35 9
MT-15CC-32 32 47.5 40 54 37 9
MT-15CC-35 35 50.5 44 58 40 10
MT-15CC-38 38 53.5 46 60 42 10
MT-15CC-40 40 56.5 48 64 43 10
MT-15CC-45 45 61.5 52 66 45 10
MT-15CC-50 50 66.5 58 72 47 10
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 7
Product:
Pump Seal
Model Number:
MT-U59SC
Description:
Main Characteristics
Mostly Use: petroleum products, chemical solvents,
low and middle corrosion acids and other
similar liquids.
Pressure in the sealed chamber: <= 1.2Mpa
Temperature in the sealed chamber: -40~200oC
Linear Velocity: <= 20m / sec
MT-U59SC-40 40 56.3 58 51 45 32
MT-U59SC-43 43 59.3 61 54 45 32
MT-U59SC-45 45 61.3 63 56 45 32
MT-U59SC-48 48 64.3 66 59 45 32
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 8
Product:
Pump Seal
Model Number:
MT-FT301CC
Description:
Main Characteristics
Major for water pumps and submersible pumps
Pressure in the sealed chamber: <= 0.6Mpa
Temperature in the sealed chamber: -20oC~100oC
Linear Velocity: <= 15m / sec
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 9
Pump Seal
Model Number:
MT-55KCC
Description:
Main Characteristics
Mostly Use: water pumps and circulation pumps etc.
Pressure in the sealed chamber: <= 0.8Mpa
Temperature in the sealed chamber: -20oC~100oC
Linear Velocity: <= 15m / sec
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 10
Product:
Spring Seal
Model Number:
MT-58SC
Description:
Main Characteristics
Mostly Use: average corrosion mediums, such as water, oil, weak acid, weak alkali, etc.
Pressure in the sealed chamber: <= 1.2Mpa
Temperature in the sealed chamber: -20oC~100oC
Linear Velocity: <= 16m / sec
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 11
Product:
Pump Seal
Model Number:
MT-60CC
Description:
Main Characteristics
Mostly Use: water, oil and other low corrosion liquids.
Pressure in the sealed chamber: <= 1.0Mpa
Temperature in the sealed chamber: -20~120oC
Linear Velocity: <= 15m / sec
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 12
Product:
Oil Seal
Model Number:
MT-27SS
Description:
Main Characteristics
Mostly Use: average corrosion mediums, such as water, oils,
weak acid, weak alkali etc.
Pressure in the sealed chamber: <= 1.0Mpa
Temperature in the sealed chamber: -30~200oC
Linear Velocity: <= 16m / sec
MT-27SS-38 38 54 56 49 55 44
MT-27SS-40 40 56 58 51 55 44
MT-27SS-45 45 61 63 56 60 49
MT-27SS-50 50 66 70 62 60 47
MT-27SS-55 55 71 75 67 70 57
MT-27SS-60 60 80 80 72 70 57
MT-27SS-65 65 85 85 77 80 67
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 13
Product:
Spring Seal
Model Number:
MT-GCC
Description:
Main Characteristics
Mostly Use: major for suction pumps and agitator etc.
Pressure in the sealed chamber: <= 0.5Mpa
Temperature in the sealed chamber: -20oC~110oC
Linear Velocity: <= 15m / sec
TYPE\SIZE inch d D D1 L L1
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 14
Product:
Pump Seal
Model Number:
MT-56DS
Description:
Main Characteristics
Mostly Use: mediums face: general weak corrosive liquids and polluted
water and so on, in which the quantity of solid particles is less than 4
percent in volume.
Closing liquid face: oil sort and so on.
Pressure in the sealed chamber: <= 0.35Mpa
Temperature in the sealed chamber: <=100oC
Linear Velocity: <= 10m / sec
TYPE\SIZE d D1 L L1
MT-56DS-20 20 35 46.8 8
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 15
Product:
Industrial Pump Seal
Model Number:
MT- MG9SC
Description:
Stationary Seats:
1.51CC seal equip MTth seat(DIN24960)
2.Stationary seal alternative: (DIN24960) and seats
Design Features:
1.Single seal
2.Unbalanced
3.Conical spring
4.Dependent on direction
5.To DIN 24960
6 15 - - - 28 43 43 26.5 11.5
8 18 - - - 30 47 - - -
10 20 21 17.5 10 32 48 - - -
12 22 23 17.5 10 35 53 - - -
14 25 25 17.5 10 38 56 - - -
15 27 - - -
16 27 27 19.5 10
18 30 33 20.5 11.5
20 32 35 22 11.5
22 35 37 23.5 11.5
24 38 39 25 11.5
25 40 40 26.5 11.5
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 16
Product:
Shaft Seal
Model Number:
MT-43SS
Description:
Stationary Ring(Ceramic/SiC/TC)
Rotary Ring(Carbon/SiC/TC)
Secondary Seal(NBR/EPDM/VITON)
Spring & Other Parts(S.S/SUS304/SUS316)
MT-43SS-40 40 56 58 45 2 6
MT-43SS-43 43 59 61 45 2 6
MT-43SS-45 45 61 63 45 2 6
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 17
Product:
Industrial Pump Seal
Model Number:
MT-60CC
Description:
We supply mechanical seal and seal material,mechanical seal including pump seal, industrial pump seal,
auto cooling pump seal, shaft seal, seal ring, carbide seal, etc.
Seal Size
d D3 D4 L3 D7 L6 L8 MT-60CC-2.750 69.85 95.25 103.78 49.2 95.25 14.3 15.9
(inches)
MT-60CC-0.500 12.7 23.81 26.99 20.64 27.8 7.1 8.7 MT-60CC-2.875 73.03 98.43 111.13 52.37 98.45 14.3 15.9
MT-60CC-0.625 15.88 26.99 33.34 22.23 30.95 8.7 10.3 MT-60CC-3.000 76.2 101.6 114.3 52.37 101.6 14.3 15.9
MT-60CC-0.750 19.05 30.16 36.51 22.23 34.15 8.7 10.3 MT-60CC-3.125 79.38 103.78 120.65 55.55 111.15 18.3 19.9
MT-60CC-0.875 22.23 33.34 39.69 23.81 37.3 8.7 10.3 MT-60CC-3.250 82.55 107.95 123.83 55.55 114.3 18.3 19.9
MT-60CC-1.000 25.4 42.85 49.2 25.4 40.5 8.7 10.3 MT-60CC-3.375 85.73 114.3 133.35 55.55 117.5 18.3 19.9
MT-60CC-1.125 28.58 46.02 52.37 26.97 47.65 10.3 11.9 MT-60CC-3.500 88.9 117.48 136.53 55.55 120.65 18.3 19.9
MT-60CC-1.250 31.75 49.2 55.55 26.97 50.8 10.3 11.9 MT-60CC-3.625 92.08 120.65 139.7 58.72 123.85 18.3 19.9
MT-60CC-1.375 34.93 52.37 58.72 28.58 54 10.3 11.9 MT-60CC-3.750 95.25 123.83 142.88 58.72 127 18.3 19.9
MT-60CC-1.500 38.1 55.55 61.9 28.58 57.15 10.3 11.9 MT-60CC-3.875 98.43 127 146.05 61.9 130.2 18.3 19.9
MT-60CC-1.625 41.28 63.5 69.85 34.93 60.35 10.3 11.9 MT-60CC-4.000 101.6 130.18 149.23 61.9 133.35 18.3 19.9
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 18
Product:
Industrial Pump Seal
Model Number:
MT-G13SC
Description:
Stationary Ring(Ceramic/SiC/TC)
Rotary Ring(Carbon/SiC)
Retainer(SUS304/SUS316)
Spring(SUS304/SUS316)
Spring Holder(SUS304/SUS316)
Bellows(NBR/EPDM/VITON)
O-Ring(NBR/EPDM/VITON)
Seal size
d3 d6 d7 L1 L2
d(mm)
24 42.5 33 39 50 7.5
25 42.5 34 40 50 7.5
28 49 37 43 50 7.5
30 49 39 45 50 7.5
32 53.5 42 48 55 7.5
35 57 44 50 55 7.5
38 59 49 56 55 9
40 62 51 58 55 9
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 19
Product:
Spring Seal
Model Number:
MT-G OSS
Description:
Stationary Ring(Ceramic/SiC/TC)
Rotary Ring(Carbon/SiC/TC)
Secondary Seal(NBR/EPDM/VITON)
Spring & Other Parts(SUS304/SUS316)
Seal size
d2 d3 dst d11 d12 L1 L14 40 55 62 64 52.2 58 30 10.8
d(mm)
14 26.5 28.5 30 20.5 24.6 17 5.6 48 63 70.5 74 59.7 68.4 30.5 11.6
32 46 53.5 55 42.2 48 27.5 10.5 85 107 120 124 100.2 109 41 14.8
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 20
Product:
Shaft Seal
Model Number:
MT-M74SC
Description:
Stationary Ring(Carbon/SiC/TC)
Rotary Ring(SiC/TC/Carbon)
Secondary Seal(VITON/PTFE+VITON)
Spring & Other Parts(SUS304/SUS316)
Design Features:
a. H75 Mulitiple Spring
b. Conform to ISO3069,DIN24960 and GB6556 standards.
c. Balanced mechanical seal
We supply mechanical seal and seal material,mechanical seal including pump seal, industrial pump seal,
auto cooling pump seal, shaft seal, seal ring, carbide seal, etc.
33 38 55 42 48 38.5 50 70 75 99 83 92 52 70
35 40 57 44 50 38.5 50 75 80 103 88 97 52 70
48 53 70 59 66 38.5 52.5
50 55 72 62 70 42.5 57.5
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 21
Product:
Spring Seal
Model Number:
MT- MH7NCS
Description:
Stationary Ring(Carbon/SiC/TC)
Rotary Ring(SiC/TC/Carbon)
Secondary Seal(VITON/PTFE+VITON)
Spring & Other Parts(SUS304/SUS316)
Design Features:
a.Wave Spring
b.Conform to ISO3069,DIN24960 and GB6556 standards.
c.Balanced mechanical seal
Seal size
d MT-MWS-53 53
(mm)
MT-MWS-25 25 MT-MWS-55 55
MT-MWS-28 28 MT-MWS-60 60
MT-MWS-30 30 MT-MWS-65 65
MT-MWS-33 33 MT-MWS-70 70
MT-MWS-35 35 MT-MWS-75 75
MT-MWS-38 38 MT-MWS-80 80
MT-MWS-40 40 MT-MWS-85 85
MT-MWS-43 43 MT-MWS-90 90
MT-MWS-45 45 MT-MWS-95 95
MT-MWS-48 48
MT-MWS-50 55
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 22
Product:
Industrial Pump Seal
Model Number:
MT-702SC
Description:
Stationary Ring(Ceramic/SiC/TC)
Rotary Ring(Plastic Carbon/Carbon/SiC/TC)
Secondary Ring(NBR/EPDM/VITON)
Spring and Retainer(SUS304/SUS316)
Model d1 d7 L1 L3
MT-702SC-10 10 21 30 5.5
MT-702SC -30 30 45 51 8
MT-702SC -35 35 50 51 8
MT-702SC -40 40 58 58 9
MT-702SC -45 45 63 58 9
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 23
Product:
Spring Seal
Model Number:
MT-MSL
Description:
Main Characteristics
Mostly Use: oil, water and other
low corrosion mediums.
Pressure in the sealed chamber: <= 4Mpa
Temperature in the sealed chamber: -30oC~220oC
Linear Velocity: <= 20m / sec
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 24
Product:
Auto Cooling Pump Seal
Model Number:
MT-FBW
Description:
Rotary Ring(Ceramic/SiC/TC)
Stationary Ring(Plastic Carbon/Carbon/SiC)
Secondary seat(NBR/EPDM/VITON)
Sping & Other parts(SUS304/SUS316)
Model d1 d3 d7 L1 L4
MT-FBW-12M 12 30 24 20 7.5
MT-FBW-20 20 40 34 20 9.5
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 25
Product:
Auto Cooling Pump Seal
Model Number:
MT-FT
Description:
Stationary seat(SUS304/SUS316)
Drive ring(SUS304/SUS316)
Bellows(NBR/EPDM/VITON)
Spring(65Mn/SUS304/SUS316)
Sping retainer(SUS304/SUS316)
Stationary Ring(Plastic Carbon/Carbon/SiC)
Rotary Ring(Ceramic/SiC/TC)
Cup gasket(NBR/EPDM/VITON)
Main Characteristics:
Mostly Use: internal-combustion engine cooling pump
piping pump, oil and other low corrosion mediums.
Pressure in the sealed chamber: <= 0.3Mpa
Temperature in the sealed chamber: -20oC~100oC
Linear Velocity: <= 10m / sec
TYPE\SIZE d D D1 D2 L1 L2 L3
MT-FT-12 12 18 26 8 6 6.8
MT-FT-25 25 50 41.5 12 10 8
MT-FT-35 35 58 50 10 12 8
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 26
Product:
Auto Cooling Pump Seal
Model Number:
MT-F
Description:
Main Characteristics
Mostly Use: internal-combustion engine cooling pump
piping pump, oil and other low corrosion mediums.
Pressure in the sealed chamber: <= 0.3Mpa
Temperature in the sealed chamber: -20oC~100oC
Linear Velocity: <= 10m / sec
TYPE\SIZE d D D1 L L1
MT-F-12 12 25 30 17.7 8
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 27
O-Rings O-Ring KIT O-Ring CORD
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 28
Aramid Fiber 8898 Pure Teflone 8032
Performance: Performance:
• Temp. : -220oC ~ + 300oC • Temp. : 100oC ~ + 260oC
• Press. : 203 kgf/cm2 • Press. : 50 kgf/cm2
• Sliding Speed: 25 m/sec • Sliding Speed: 5 m/sec
• pH : 2 ~ 13 • pH : 0 ~ 14
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 29
Aramid Fiber 8821 Asbestos Braided 8999
Performance: Performance:
• Temp. : -220oC ~ + 300oC • Temp. : -100oC ~ + 260oC
• Press. : 1.000 kgf/cm2 • Press. : 10 kgf/cm2
• Sliding Speed: 10 m/sec • Sliding Speed: 10 m/sec
• pH : 2 ~ 14 • pH : 2 ~ 13
• PV : 65 kgf/cm2.m/sec
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 30
Carbon Fiber Braided 8865 Rami Fiber 8870
Performance: Performance:
• Temp. : -250oC ~ +300 oC • Temp. : 80oC
• Press. : 100 kgf/cm2 • Press. : 7 kgf/cm2
• Sliding Speed: 20 m/sec • Sliding Speed: 10 m/sec
• pH : 0 ~ 14 • pH :5~9
• PV : 125 kgf/cm2.m/sec • PV : 35 kgf/cm2.m/sec
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 31
Gland Packing Graphite, Asbestos, Kevlar
• Graphite
• Kevlar
• PTFE/Pure Teflon
• Asbestos
Bearing:
Bushing: • NTN, FAG
• Stainless • NSK, INA
• Kuningan • KOYO, ASB
• Baja • SKF
• Teflon, Carbon
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 32
OIL SEAL: Material:
• NOK NBR, Vitone, EPDM O-Rings
• TTO Neoprene, Polyurethane
• Hallite
• CR, CHO
• National
• Pembuatan Oil Seal
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 33
Packing Sponge Silicon Packing NBR, Neoprene, EPDM, Viton, Carbon
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 34
Butter Fly Valve
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 35
Service Pompa
Telp:
+6221 88967435 - 88868815
Fax:
+6221 8860145
E-mail:
mti.ind@yahoo.com
marketing_mti@yahoo.com
Website:
www.mti-ind.com
PT. Multitech Industrial Indonesia Telp:(021) 88967435 – 88868815 Fax:(021) 8860145 Email: mti.ind@yahoo.com Website: www.mti-ind.com 36