Nomor : 051/MGM/III/23
Kepada Yth.
Kepala Dinas Transmigrasi Tenaga Kerja & Sosial
Kab.Luwu Timur
Di Malili
Bersama ini kami sampaikan Bahwa PT.Minja Global Mandiri sedang menjalankan kontrak di lokasi PT.Vale
Indonesia yaitu “Penyedia Jasa Tenaga Kerja” Sehubungan dengan hal ini, maka kami membuka lowongan kerja dengan
Posisi :
No Posisi/Jabatan Qty
1 Jnr Reliability Engineer 2 Orang
1. Persyaratan :
Catatan :
• Hanya pelamar yang memenuhi persyaratan yang akan dipanggil untuk mengikuti proses seleksi berikutnya.
• Posisi ini dibuka untuk kategori Lokal & Non-Lokal
Demikian Informasi yang kami sampaikan,Terima kasih.
Hormat kami,
Management PT.MGM
1|Page
PT.MINJA GLOBAL MANDIRI
Jl.Nyato Blok D1/12 Villa DanauMatano
Sorowako,Nuha,LuwuTimur,Sul-Sel,Indonesia
Phone : +6285399303857 I +6285342607200
e-Mail : minja_sqr@yahoo.com I
Jnr.Reliability Engineer
Job Purpose
To measure, control, and improve proactive maintenance strategy and equipment reliability
performance.To ensure equipment meets availability and reliability target to achieve production plan,
financial goal and compliance with EHS and government standard.
For Process Plant area and also for all asset under central maintenance as maintainer.
Main Accountabilities
1. Ensure EHS program and standard implementation within accountabilities area meet the company
target and goals.
2. Setup maintenance strategy (routines and asset integrity, include creates maintenance standard
job) in CMMS/ERP (SAP) thus every equipment has sustainability asset maintenance program.
3. Define, measures, and control reliability and availability target of process plant equipment to align
with production plan and forecast requirement and ensure any deviation from target is properly
addressed and well communicated to relevant stake holder.
4. Control Reliability Analyst team to plan, implement and control proactive maintenance strategies
(MST) to ensure strategies are effective, efficient, and consistently executed with quality and
timely manners.
5. Control data management of process plant equipment related to maintenance history in structured
way thus the maintenance information are available continuously for analysis and documented.
6. Equipment performance analysis, control maintenance performance and facilitates deviation
treatment to identify improvement opportunity by providing project charter as continuous efforts
to leverage asset performances.
7. Improvement and monitoring of facilities or IT solution system of maintenance work management
or equipment health condition monitoring system in order to ensure the solution are accurate,
updated, and usable to improve maintenance management performance.
8. Control corporate or government certification program for pressure vessel and lifting equipment in
process plant area.
9. Provide analytical resources to investigates major equipment failures (breakdown related to
production and risk EHS) to develop recommendations to ensure no future repetitive breakdown.
Requirements
1. Undergraduate Degree (S-1) Electrical /Mechanical
Experience: 1 - 3 Years
2. Special Skill
• POP/POM, is preferable
• Reliability Centered Maintenance (RCM) basic knowledge + FMEA (Failure Mode Effect
Analysis) Basic Knowledge
• Asset Management Basic Knowledge
• Analytical Data and Process Control Analysis
• SPC – Statistics Process Control
Root Couse Analysis (RCA)
Reliability Analyst
Life Cycle Cost (LCC) Analysis
2|Page